The tg_may_dispatch() will call tg_with_in_bps_limit() and
tg_with_in_iops_limit() to check if we can dispatch a bio or
not, which will calculate bps/iops limitation multiple times.
But tg_may_dispatch() is always called under queue lock, which
means the bps/iops limitation will not change in tg_may_dispatch().
So we can calculate the bps/iops limitation only once, and pass
them to tg_with_in_bps_limit() and tg_with_in_iops_limit() to
avoid calculating bps/iops limitation repeatedly.
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The 'throtl_grp_quantum' and 'throtl_quantum' are both read-only
variables, thus better to use readable macros instead of static
variables, which can also save some spaces for .bss area.
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
adjust_inuse_and_calc_cost() is responsible for reducing the amount of
donated weights dynamically in period as the budget runs low. Because we
don't want to do full donation calculation in period, we keep latching up
inuse by INUSE_ADJ_STEP_PCT of the active weight of the cgroup until the
resulting hweight_inuse is satisfactory.
Unfortunately, the adj_step calculation was reading the active weight before
acquiring ioc->lock. Because the current thread could have lost race to
activate the iocg to another thread before entering this function, it may
read the active weight as zero before acquiring ioc->lock. When this
happens, the adj_step is calculated as zero and the incremental adjustment
loop becomes an infinite one.
Fix it by fetching the active weight after acquiring ioc->lock.
Fixes: b0853ab4a2 ("blk-iocost: revamp in-period donation snapbacks")
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Conceptually, root_iocg->hweight_donating must be less than WEIGHT_ONE but
all hweight calculations round up and thus it may end up >= WEIGHT_ONE
triggering divide-by-zero and other issues. Bound the value to avoid
surprises.
Fixes: e08d02aa5f ("blk-iocost: implement Andy's method for donation weight updates")
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
These functions can be used to enable iostat for partitions on devices
like md, bcache.
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- NVMe pull request from Christoph:
- cancel async events before freeing them (David Milburn)
- revert a broken race fix (James Smart)
- fix command processing during resets (Sagi Grimberg)
- Fix a kyber crash with requeued flushes (Omar)
- Fix __bio_try_merge_page() same_page error for no merging (Ritesh)
-----BEGIN PGP SIGNATURE-----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=J16G
-----END PGP SIGNATURE-----
Merge tag 'block-5.9-2020-09-11' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Fix a regression in bdev partition locking (Christoph)
- NVMe pull request from Christoph:
- cancel async events before freeing them (David Milburn)
- revert a broken race fix (James Smart)
- fix command processing during resets (Sagi Grimberg)
- Fix a kyber crash with requeued flushes (Omar)
- Fix __bio_try_merge_page() same_page error for no merging (Ritesh)
* tag 'block-5.9-2020-09-11' of git://git.kernel.dk/linux-block:
block: Set same_page to false in __bio_try_merge_page if ret is false
nvme-fabrics: allow to queue requests for live queues
block: only call sched requeue_request() for scheduled requests
nvme-tcp: cancel async events before freeing event struct
nvme-rdma: cancel async events before freeing event struct
nvme-fc: cancel async events before freeing event struct
nvme: Revert: Fix controller creation races with teardown flow
block: restore a specific error code in bdev_del_partition
NVMe shares tagset between fabric queue and admin queue or between
connect_q and NS queue, so hctx_may_queue() can be called to allocate
request for these queues.
Tags can be reserved in these tagset. Before error recovery, there is
often lots of in-flight requests which can't be completed, and new
reserved request may be needed in error recovery path. However,
hctx_may_queue() can always return false because there is too many
in-flight requests which can't be completed during error handling.
Finally, nothing can proceed.
Fix this issue by always allowing reserved tag allocation in
hctx_may_queue(). This is reasonable because reserved tags are supposed
to always be available.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Cc: David Milburn <dmilburn@redhat.com>
Cc: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
scsi/sg.h is included more than once, Remove the one that isn't
necessary.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The test and the explaination of the patch as bellow.
Before test we added more debug code in blkg_async_bio_workfn():
int count = 0
if (bios.head && bios.head->bi_next) {
need_plug = true;
blk_start_plug(&plug);
}
while ((bio = bio_list_pop(&bios))) {
/*io_punt is a sysctl user interface to control the print*/
if(io_punt) {
printk("[%s:%d] bio start,size:%llu,%d count=%d plug?%d\n",
current->comm, current->pid, bio->bi_iter.bi_sector,
(bio->bi_iter.bi_size)>>9, count++, need_plug);
}
submit_bio(bio);
}
if (need_plug)
blk_finish_plug(&plug);
Steps that need to be set to trigger *PUNT* io before testing:
mount -t btrfs -o compress=lzo /dev/sda6 /btrfs
mount -t cgroup2 nodev /cgroup2
mkdir /cgroup2/cg3
echo "+io" > /cgroup2/cgroup.subtree_control
echo "8:0 wbps=1048576000" > /cgroup2/cg3/io.max #1000M/s
echo $$ > /cgroup2/cg3/cgroup.procs
Then use dd command to test btrfs PUNT io in current shell:
dd if=/dev/zero of=/btrfs/file bs=64K count=100000
Test hardware environment as below:
[root@localhost btrfs]# lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 32
On-line CPU(s) list: 0-31
Thread(s) per core: 2
Core(s) per socket: 8
Socket(s): 2
NUMA node(s): 2
Vendor ID: GenuineIntel
With above debug code, test command and test environment, I did the
tests under 3 different system loads, which are triggered by stress:
1, Run 64 threads by command "stress -c 64 &"
[53615.975974] [kworker/u66:18:1490] bio start,size:45583056,8 count=0 plug?1
[53615.975980] [kworker/u66:18:1490] bio start,size:45583064,8 count=1 plug?1
[53615.975984] [kworker/u66:18:1490] bio start,size:45583072,8 count=2 plug?1
[53615.975987] [kworker/u66:18:1490] bio start,size:45583080,8 count=3 plug?1
[53615.975990] [kworker/u66:18:1490] bio start,size:45583088,8 count=4 plug?1
[53615.975993] [kworker/u66:18:1490] bio start,size:45583096,8 count=5 plug?1
... ...
[53615.977041] [kworker/u66:18:1490] bio start,size:45585480,8 count=303 plug?1
[53615.977044] [kworker/u66:18:1490] bio start,size:45585488,8 count=304 plug?1
[53615.977047] [kworker/u66:18:1490] bio start,size:45585496,8 count=305 plug?1
[53615.977050] [kworker/u66:18:1490] bio start,size:45585504,8 count=306 plug?1
[53615.977053] [kworker/u66:18:1490] bio start,size:45585512,8 count=307 plug?1
[53615.977056] [kworker/u66:18:1490] bio start,size:45585520,8 count=308 plug?1
[53615.977058] [kworker/u66:18:1490] bio start,size:45585528,8 count=309 plug?1
2, Run 32 threads by command "stress -c 32 &"
[50586.290521] [kworker/u66:6:32351] bio start,size:45806496,8 count=0 plug?1
[50586.290526] [kworker/u66:6:32351] bio start,size:45806504,8 count=1 plug?1
[50586.290529] [kworker/u66:6:32351] bio start,size:45806512,8 count=2 plug?1
[50586.290531] [kworker/u66:6:32351] bio start,size:45806520,8 count=3 plug?1
[50586.290533] [kworker/u66:6:32351] bio start,size:45806528,8 count=4 plug?1
[50586.290535] [kworker/u66:6:32351] bio start,size:45806536,8 count=5 plug?1
... ...
[50586.299640] [kworker/u66:5:32350] bio start,size:45808576,8 count=252 plug?1
[50586.299643] [kworker/u66:5:32350] bio start,size:45808584,8 count=253 plug?1
[50586.299646] [kworker/u66:5:32350] bio start,size:45808592,8 count=254 plug?1
[50586.299649] [kworker/u66:5:32350] bio start,size:45808600,8 count=255 plug?1
[50586.299652] [kworker/u66:5:32350] bio start,size:45808608,8 count=256 plug?1
[50586.299663] [kworker/u66:5:32350] bio start,size:45808616,8 count=257 plug?1
[50586.299665] [kworker/u66:5:32350] bio start,size:45808624,8 count=258 plug?1
[50586.299668] [kworker/u66:5:32350] bio start,size:45808632,8 count=259 plug?1
3, Don't run thread by stress
[50861.355246] [kworker/u66:19:32376] bio start,size:13544504,8 count=0 plug?0
[50861.355288] [kworker/u66:19:32376] bio start,size:13544512,8 count=0 plug?0
[50861.355322] [kworker/u66:19:32376] bio start,size:13544520,8 count=0 plug?0
[50861.355353] [kworker/u66:19:32376] bio start,size:13544528,8 count=0 plug?0
[50861.355392] [kworker/u66:19:32376] bio start,size:13544536,8 count=0 plug?0
[50861.355431] [kworker/u66:19:32376] bio start,size:13544544,8 count=0 plug?0
[50861.355468] [kworker/u66:19:32376] bio start,size:13544552,8 count=0 plug?0
[50861.355499] [kworker/u66:19:32376] bio start,size:13544560,8 count=0 plug?0
[50861.355532] [kworker/u66:19:32376] bio start,size:13544568,8 count=0 plug?0
[50861.355575] [kworker/u66:19:32376] bio start,size:13544576,8 count=0 plug?0
[50861.355618] [kworker/u66:19:32376] bio start,size:13544584,8 count=0 plug?0
[50861.355659] [kworker/u66:19:32376] bio start,size:13544592,8 count=0 plug?0
[50861.355740] [kworker/u66:0:32346] bio start,size:13544600,8 count=0 plug?1
[50861.355748] [kworker/u66:0:32346] bio start,size:13544608,8 count=1 plug?1
[50861.355962] [kworker/u66:2:32347] bio start,size:13544616,8 count=0 plug?0
[50861.356272] [kworker/u66:7:31962] bio start,size:13544624,8 count=0 plug?0
[50861.356446] [kworker/u66:7:31962] bio start,size:13544632,8 count=0 plug?0
[50861.356567] [kworker/u66:7:31962] bio start,size:13544640,8 count=0 plug?0
[50861.356707] [kworker/u66:19:32376] bio start,size:13544648,8 count=0 plug?0
[50861.356748] [kworker/u66:15:32355] bio start,size:13544656,8 count=0 plug?0
[50861.356825] [kworker/u66:17:31970] bio start,size:13544664,8 count=0 plug?0
Analysis of above 3 test results with different system load:
>From above test, we can see more and more continuous bios can be plugged
with system load increasing. When run "stress -c 64 &", 310 continuous
bios are plugged; When run "stress -c 32 &", 260 continuous bios are
plugged; When don't run stress, at most only 2 continuous bios are
plugged, in most cases, bio_list only contains one single bio.
How to explain above phenomenon:
We know, in submit_bio(), if the bio is a REQ_CGROUP_PUNT io, it will
queue a work to workqueue blkcg_punt_bio_wq. But when the workqueue is
scheduled, it depends on the system load. When system load is low, the
workqueue will be quickly scheduled, and the bio in bio_list will be
quickly processed in blkg_async_bio_workfn(), so there is less chance
that the same io submit thread can add multiple continuous bios to
bio_list before workqueue is scheduled to run. The analysis aligned with
above test "3".
When system load is high, there is some delay before the workqueue can
be scheduled to run, the higher the system load the greater the delay.
So there is more chance that the same io submit thread can add multiple
continuous bios to bio_list. Then when the workqueue is scheduled to run,
there are more continuous bios in bio_list, which will be processed in
blkg_async_bio_workfn(). The analysis aligned with above test "1" and "2".
According to test, we can get io performance improved with the patch,
especially when system load is higher. Another optimazition is to use
the plug only when bio_list contains at least 2 bios.
Signed-off-by: Xianting Tian <tian.xianting@h3c.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Like check_disk_changed, except that it does not call ->revalidate_disk
but leaves that to the caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we hit the UINT_MAX limit of bio->bi_iter.bi_size and so we are anyway
not merging this page in this bio, then it make sense to make same_page
also as false before returning.
Without this patch, we hit below WARNING in iomap.
This mostly happens with very large memory system and / or after tweaking
vm dirty threshold params to delay writeback of dirty data.
WARNING: CPU: 18 PID: 5130 at fs/iomap/buffered-io.c:74 iomap_page_release+0x120/0x150
CPU: 18 PID: 5130 Comm: fio Kdump: loaded Tainted: G W 5.8.0-rc3 #6
Call Trace:
__remove_mapping+0x154/0x320 (unreliable)
iomap_releasepage+0x80/0x180
try_to_release_page+0x94/0xe0
invalidate_inode_page+0xc8/0x110
invalidate_mapping_pages+0x1dc/0x540
generic_fadvise+0x3c8/0x450
xfs_file_fadvise+0x2c/0xe0 [xfs]
vfs_fadvise+0x3c/0x60
ksys_fadvise64_64+0x68/0xe0
sys_fadvise64+0x28/0x40
system_call_exception+0xf8/0x1c0
system_call_common+0xf0/0x278
Fixes: cc90bc6842 ("block: fix "check bi_size overflow before merge"")
Reported-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Yang Yang reported the following crash caused by requeueing a flush
request in Kyber:
[ 2.517297] Unable to handle kernel paging request at virtual address ffffffd8071c0b00
...
[ 2.517468] pc : clear_bit+0x18/0x2c
[ 2.517502] lr : sbitmap_queue_clear+0x40/0x228
[ 2.517503] sp : ffffff800832bc60 pstate : 00c00145
...
[ 2.517599] Process ksoftirqd/5 (pid: 51, stack limit = 0xffffff8008328000)
[ 2.517602] Call trace:
[ 2.517606] clear_bit+0x18/0x2c
[ 2.517619] kyber_finish_request+0x74/0x80
[ 2.517627] blk_mq_requeue_request+0x3c/0xc0
[ 2.517637] __scsi_queue_insert+0x11c/0x148
[ 2.517640] scsi_softirq_done+0x114/0x130
[ 2.517643] blk_done_softirq+0x7c/0xb0
[ 2.517651] __do_softirq+0x208/0x3bc
[ 2.517657] run_ksoftirqd+0x34/0x60
[ 2.517663] smpboot_thread_fn+0x1c4/0x2c0
[ 2.517667] kthread+0x110/0x120
[ 2.517669] ret_from_fork+0x10/0x18
This happens because Kyber doesn't track flush requests, so
kyber_finish_request() reads a garbage domain token. Only call the
scheduler's requeue_request() hook if RQF_ELVPRIV is set (like we do for
the finish_request() hook in blk_mq_free_request()). Now that we're
handling it in blk-mq, also remove the check from BFQ.
Reported-by: Yang Yang <yang.yang@vivo.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Switch to the naming used by the other entries so that we can use the
QUEUE_RW_ENTRY helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add two helpers macros to avoid boilerplate code for the queue sysfs
entries.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
mdadm relies on the fact that deleting an invalid partition returns
-ENXIO or -ENOTTY to detect if a block device is a partition or a
whole device.
Fixes: 08fc1ab6d7 ("block: fix locking in bdev_del_partition")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now we usually free the hctx->sched_data by e->type->ops.exit_hctx(),
and no users will use blk_mq_sched_free_hctx_data() function.
Remove it.
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Discarding blocks and buffers under a mounted filesystem is hardly
anything admin wants to do. Usually it will confuse the filesystem and
sometimes the loss of buffer_head state (including b_private field) can
even cause crashes like:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
PGD 0 P4D 0
Oops: 0002 [#1] SMP PTI
CPU: 4 PID: 203778 Comm: jbd2/dm-3-8 Kdump: loaded Tainted: G O --------- - - 4.18.0-147.5.0.5.h126.eulerosv2r9.x86_64 #1
Hardware name: Huawei RH2288H V3/BC11HGSA0, BIOS 1.57 08/11/2015
RIP: 0010:jbd2_journal_grab_journal_head+0x1b/0x40 [jbd2]
...
Call Trace:
__jbd2_journal_insert_checkpoint+0x23/0x70 [jbd2]
jbd2_journal_commit_transaction+0x155f/0x1b60 [jbd2]
kjournald2+0xbd/0x270 [jbd2]
So if we don't have block device open with O_EXCL already, claim the
block device while we truncate buffer cache. This makes sure any
exclusive block device user (such as filesystem) cannot operate on the
device while we are discarding buffer cache.
Reported-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
[axboe: fix !CONFIG_BLOCK error in truncate_bdev_range()]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=8fvz
-----END PGP SIGNATURE-----
Merge tag 'block-5.9-2020-09-04' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A bit larger than usual this week, mostly due to the NVMe fixes
arriving late for -rc3 and hence didn't make last weeks pull request.
- NVMe:
- instance leak and io boundary fixes from Keith
- fc locking fix from Christophe
- various tcp/rdma reset during traffic fixes from Sagi
- pci use-after-free fix from Tong
- tcp target null deref fix from Ziye
- Locking fix for partition removal (Christoph)
- Ensure bdi->io_pages is always set (me)
- Fixup for hd struct reference (Ming)
- Fix for zero length bvecs (Ming)
- Two small blk-iocost fixes (Tejun)"
* tag 'block-5.9-2020-09-04' of git://git.kernel.dk/linux-block:
block: allow for_each_bvec to support zero len bvec
blk-stat: make q->stats->lock irqsafe
blk-iocost: ioc_pd_free() shouldn't assume irq disabled
block: fix locking in bdev_del_partition
block: release disk reference in hd_struct_free_work
block: ensure bdi->io_pages is always initialized
nvme-pci: cancel nvme device request before disabling
nvme: only use power of two io boundaries
nvme: fix controller instance leak
nvmet-fc: Fix a missed _irqsave version of spin_lock in 'nvmet_fc_fod_op_done()'
nvme: Fix NULL dereference for pci nvme controllers
nvme-rdma: fix reset hang if controller died in the middle of a reset
nvme-rdma: fix timeout handler
nvme-rdma: serialize controller teardown sequences
nvme-tcp: fix reset hang if controller died in the middle of a reset
nvme-tcp: fix timeout handler
nvme-tcp: serialize controller teardown sequences
nvme: have nvme_wait_freeze_timeout return if it timed out
nvme-fabrics: don't check state NVME_CTRL_NEW for request acceptance
nvmet-tcp: Fix NULL dereference when a connect data comes in h2cdata pdu
High CPU utilization on "native_queued_spin_lock_slowpath" due to lock
contention is possible for mq-deadline and bfq IO schedulers
when nr_hw_queues is more than one.
It is because kblockd work queue can submit IO from all online CPUs
(through blk_mq_run_hw_queues()) even though only one hctx has pending
commands.
The elevator callback .has_work for mq-deadline and bfq scheduler considers
pending work if there are any IOs on request queue but it does not account
hctx context.
Add a per-hctx 'elevator_queued' count to the hctx to avoid triggering
the elevator even though there are no requests queued.
[jpg: Relocated atomic_dec() in dd_dispatch_request(), update commit message per Kashyap]
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For when using a shared sbitmap, no longer should the number of active
request queues per hctx be relied on for when judging how to share the tag
bitmap.
Instead maintain the number of active request queues per tag_set, and make
the judgement based on that.
Originally-from: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Don Brace<don.brace@microsemi.com> #SCSI resv cmds patches used
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The per-hctx nr_active value can no longer be used to fairly assign a share
of tag depth per request queue for when using a shared sbitmap, as it does
not consider that the tags are shared tags over all hctx's.
For this case, record the nr_active_requests per request_queue, and make
the judgement based on that value.
Co-developed-with: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Don Brace<don.brace@microsemi.com> #SCSI resv cmds patches used
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk-mq.h and blk-mq-tag.h include on each other, which is less than ideal.
Locate hctx_may_queue() to blk-mq.h, as it is not really tag specific code.
In this way, we can drop the blk-mq-tag.h include of blk-mq.h
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some SCSI HBAs (such as HPSA, megaraid, mpt3sas, hisi_sas_v3 ..) support
multiple reply queues with single hostwide tags.
In addition, these drivers want to use interrupt assignment in
pci_alloc_irq_vectors(PCI_IRQ_AFFINITY). However, as discussed in [0],
CPU hotplug may cause in-flight IO completion to not be serviced when an
interrupt is shutdown. That problem is solved in commit bf0beec060
("blk-mq: drain I/O when all CPUs in a hctx are offline").
However, to take advantage of that blk-mq feature, the HBA HW queuess are
required to be mapped to that of the blk-mq hctx's; to do that, the HBA HW
queues need to be exposed to the upper layer.
In making that transition, the per-SCSI command request tags are no
longer unique per Scsi host - they are just unique per hctx. As such, the
HBA LLDD would have to generate this tag internally, which has a certain
performance overhead.
However another problem is that blk-mq assumes the host may accept
(Scsi_host.can_queue * #hw queue) commands. In commit 6eb045e092 ("scsi:
core: avoid host-wide host_busy counter for scsi_mq"), the Scsi host busy
counter was removed, which would stop the LLDD being sent more than
.can_queue commands; however, it should still be ensured that the block
layer does not issue more than .can_queue commands to the Scsi host.
To solve this problem, introduce a shared sbitmap per blk_mq_tag_set,
which may be requested at init time.
New flag BLK_MQ_F_TAG_HCTX_SHARED should be set when requesting the
tagset to indicate whether the shared sbitmap should be used.
Even when BLK_MQ_F_TAG_HCTX_SHARED is set, a full set of tags and requests
are still allocated per hctx; the reason for this is that if tags and
requests were only allocated for a single hctx - like hctx0 - it may break
block drivers which expect a request be associated with a specific hctx,
i.e. not always hctx0. This will introduce extra memory usage.
This change is based on work originally from Ming Lei in [1] and from
Bart's suggestion in [2].
[0] https://lore.kernel.org/linux-block/alpine.DEB.2.21.1904051331270.1802@nanos.tec.linutronix.de/
[1] https://lore.kernel.org/linux-block/20190531022801.10003-1-ming.lei@redhat.com/
[2] https://lore.kernel.org/linux-block/ff77beff-5fd9-9f05-12b6-826922bace1f@huawei.com/T/#m3db0a602f095cbcbff27e9c884d6b4ae826144be
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Don Brace<don.brace@microsemi.com> #SCSI resv cmds patches used
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Introduce pointers for the blk_mq_tags regular and reserved bitmap tags,
with the goal of later being able to use a common shared tag bitmap across
all HW contexts in a set.
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Don Brace<don.brace@microsemi.com> #SCSI resv cmds patches used
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass hctx/tagset flags argument down to blk_mq_init_tags() and
blk_mq_free_tags() for selective init/free.
For now, make it include the alloc policy flag, which can be evaluated
when needed (in blk_mq_init_tags()).
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since the tags are allocated in blk_mq_init_tags(), it's better practice
to free in that same function upon error, rather than a callee which is to
init the bitmap tags (blk_mq_init_tags()).
[jpg: Split from an earlier patch with a new commit message]
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The function does not set the depth, but rather transitions from
shared to non-shared queues and vice versa.
So rename it to blk_mq_update_tag_set_shared() to better reflect
its purpose.
[jpg: take out some unrelated changes in blk_mq_init_bitmap_tags()]
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
BLK_MQ_F_TAG_SHARED actually means that tags is shared among request
queues, all of which should belong to LUNs attached to same HBA.
So rename it to make the point explicitly.
[jpg: rebase a few times, add rnbd-clt.c change]
Suggested-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Only virtio_blk and xen-blkfront set the revalidate argument to true,
and both do not implement the ->revalidate_disk method. So switch
to the helper that just updates the size instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace bd_invalidate with a new BDEV_NEED_PART_SCAN flag in a bd_flags
variable to better describe the condition.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove a duplicative condition to remove below cppcheck warnings:
"warning: Redundant condition: sched_allow_merge. '!A || (A && B)' is
equivalent to '!A || B' [redundantCondition]"
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If WRITE_ZERO/WRITE_SAME operation is not supported by the storage,
blk_cloned_rq_check_limits() will return IO error which will cause
device-mapper to fail the paths.
Instead, if the queue limit is set to 0, return BLK_STS_NOTSUPP.
BLK_STS_NOTSUPP will be ignored by device-mapper and will not fail the
paths.
Suggested-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Ritika Srivastava <ritika.srivastava@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
These are really cheap to collect and can be useful in debugging iocost
behavior. Add them as debug stats for now.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When an iocg accumulates too much vtime or gets deactivated, we throw away
some vtime, which lowers the overall device utilization. As the exact amount
which is being thrown away is known, we can compensate by accelerating the
vrate accordingly so that the extra vtime generated in the current period
matches what got lost.
This significantly improves work conservation when involving high weight
cgroups with intermittent and bursty IO patterns.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A low weight iocg can amass a large amount of debt, for example, when
anonymous memory gets reclaimed aggressively. If the system has a lot of
memory paired with a slow IO device, the debt can span multiple seconds or
more. If there are no other subsequent IO issuers, the in-debt iocg may end
up blocked paying its debt while the IO device is idle.
This patch implements a mechanism to protect against such pathological
cases. If the device has been sufficiently idle for a substantial amount of
time, the debts are halved. The criteria are on the conservative side as we
want to resolve the rare extreme cases without impacting regular operation
by forgiving debts too readily.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Curently, iocost syncs the delay duration to the outstanding debt amount,
which seemed enough to protect the system from anon memory hogs. However,
that was mostly because the delay calcuation was using hweight_inuse which
quickly converges towards zero under debt for delay duration calculation,
often pusnishing debtors overly harshly for longer than deserved.
The previous patch fixed the delay calcuation and now the protection against
anonymous memory hogs isn't enough because the effect of delay is indirect
and non-linear and a huge amount of future debt can accumulate abruptly
while unthrottled.
This patch implements delay hysteresis so that delay is decayed
exponentially over time instead of getting cleared immediately as debt is
paid off. While the overall behavior is similar to the blk-cgroup
implementation used by blk-iolatency, a lot of the details are different and
due to the empirical nature of the mechanism, it's challenging to adapt the
mechanism for one controller without negatively impacting the other.
As the delay is gradually decayed now, there's no point in running it from
its own hrtimer. Periodic updates are now performed from ioc_timer_fn() and
the dedicated hrtimer is removed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Debt handling had several issues.
* How much inuse a debtor carries wasn't clearly defined. inuse would be
driven down over time from not issuing IOs but it'd be better to clamp it
to minimum immediately once in debt.
* How much can be paid off was determined by hweight_inuse. As inuse was
driven down, the payment amount would fall together regardless of the
debtor's active weight. This means that the debtors were punished harshly.
* ioc_rqos_merge() wasn't calling blkcg_schedule_throttle() after
iocg_kick_delay().
This patch revamps debt handling so that
* Debt handling owns inuse for iocgs in debt and keeps them at zero.
* Payment amount is determined by hweight_active. This is more deterministic
and safer than hweight_inuse but still far from ideal in that it doesn't
factor in possible donations from other iocgs for debt payments. This
likely needs further improvements in the future.
* iocg_rqos_merge() now calls blkcg_schedule_throttle() as necessary.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Andy Newell <newella@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When the margin drops below the minimum on a donating iocg, donation is
immediately canceled in full. There are a couple shortcomings with the
current behavior.
* It's abrupt. A small temporary budget deficit can lead to a wide swing in
weight allocation and a large surplus.
* It's open coded in the issue path but not implemented for the merge path.
A series of merges at a low inuse can make the iocg incur debts and stall
incorrectly.
This patch reimplements in-period donation snapbacks so that
* inuse adjustment and cost calculations are factored into
adjust_inuse_and_calc_cost() which is called from both the issue and merge
paths.
* Snapbacks are more gradual. It occurs in quarter steps.
* A snapback triggers if the margin goes below the low threshold and is
lower than the budget at the time of the last adjustment.
* For the above, __propagate_weights() stores the margin in
iocg->saved_margin. Move iocg->last_inuse storing together into
__propagate_weights() for consistency.
* Full snapback is guaranteed when there are waiters.
* With precise donation and gradual snapbacks, inuse adjustments are now a
lot more effective and the value of scaling inuse on weight changes isn't
clear. Removed inuse scaling from weight_update().
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
iocost has various safety nets to combat inuse adjustment calculation
inaccuracies. With Andy's method implemented in transfer_surpluses(), inuse
adjustment calculations are now accurate and we can make donation amount
determinations accurate too.
* Stop keeping track of past usage history and using the maximum. Act on the
immediate usage information.
* Remove donation constraints defined by SURPLUS_* constants. Donate
whatever isn't used.
* Determine the donation amount so that the iocg will end up with
MARGIN_TARGET_PCT budget at the end of the coming period assuming the same
usage as the previous period. TARGET is set at 50% of period, which is the
previous maximum. This provides smooth convergence for most repetitive IO
patterns.
* Apply donation logic early at 20% budget. There's no risk in doing so as
the calculation is based on the delta between the current budget and the
target budget at the end of the coming period.
* Remove preemptive iocg activation for zero cost IOs. As donation can reach
near zero now, the mere activation doesn't provide any protection anymore.
In the unlikely case that this becomes a problem, the right solution is
assigning appropriate costs for such IOs.
This significantly improves the donation determination logic while also
simplifying it. Now all donations are immediate, exact and smooth.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Andy Newell <newella@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
iocost implements work conservation by reducing iocg->inuse and propagating
the adjustment upwards proportionally. However, while I knew the target
absolute hierarchical proportion - adjusted hweight_inuse, I couldn't figure
out how to determine the iocg->inuse adjustment to achieve that and
approximated the adjustment by scaling iocg->inuse using the proportion of
the needed hweight_inuse changes.
When nested, these scalings aren't accurate even when adjusting a single
node as the donating node also receives the benefit of the donated portion.
When multiple nodes are donating as they often do, they can be wildly wrong.
iocost employed various safety nets to combat the inaccuracies. There are
ample buffers in determining how much to donate, the adjustments are
conservative and gradual. While it can achieve a reasonable level of work
conservation in simple scenarios, the inaccuracies can easily add up leading
to significant loss of total work. This in turn makes it difficult to
closely cap vrate as vrate adjustment is needed to compensate for the loss
of work. The combination of inaccurate donation calculations and vrate
adjustments can lead to wide fluctuations and clunky overall behaviors.
Andy Newell devised a method to calculate the needed ->inuse updates to
achieve the target hweight_inuse's. The method is compatible with the
proportional inuse adjustment propagation which allows all hot path
operations to be local to each iocg.
To roughly summarize, Andy's method divides the tree into donating and
non-donating parts, calculates global donation rate which is used to
determine the target hweight_inuse for each node, and then derives per-level
proportions. There's non-trivial amount of math involved. Please refer to
the following pdfs for detailed descriptions.
https://drive.google.com/file/d/1PsJwxPFtjUnwOY1QJ5AeICCcsL7BM3bohttps://drive.google.com/file/d/1vONz1-fzVO7oY5DXXsLjSxEtYYQbOvsEhttps://drive.google.com/file/d/1WcrltBOSPN0qXVdBgnKm4mdp9FhuEFQN
This patch implements Andy's method in transfer_surpluses(). This makes the
donation calculations accurate per cycle and enables further improvements in
other parts of the donation logic.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Andy Newell <newella@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The way the surplus donation logic is structured isn't great. There are two
separate paths for starting/increasing donations and decreasing them making
the logic harder to follow and is prone to unnecessary behavior differences.
In preparation for improved donation handling, this patch restructures the
code so that
* All donors - new, increasing and decreasing - are funneled through the
same code path.
* The target donation calculation is factored into hweight_after_donation()
which is called once from the same spot for all possible donors.
* Actual inuse adjustment is factored into trasnfer_surpluses().
This change introduces a few behavior differences - e.g. donation amount
reduction now uses the max usage of the recent three periods just like new
and increasing donations, and inuse now gets adjusted upwards the same way
it gets downwards. These differences are unlikely to have severely negative
implications and the whole logic will be revamped soon.
This patch also removes two tracepoints. The existing TPs don't quite fit
the new implementation. A later patch will update and reinstate them.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Budget donations are inaccurate and could take multiple periods to converge.
To prevent triggering vrate adjustments while surplus transfers were
catching up, vrate adjustment was suppressed if donations were increasing,
which was indicated by non-zero nr_surpluses.
This entangling won't be necessary with the scheduled rewrite of donation
mechanism which will make it precise and immediate. Let's decouple the two
in preparation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of marking iocgs with surplus with a flag and filtering for them
while walking all active iocgs, build a surpluses list. This doesn't make
much difference now but will help implementing improved donation logic which
will iterate iocgs with surplus multiple times.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, iocg->usages[] which are used to guide inuse adjustments are
calculated from vtime deltas. This, however, assumes that the hierarchical
inuse weight at the time of calculation held for the entire period, which
often isn't true and can lead to significant errors.
Now that we have absolute usage information collected, we can derive
iocg->usages[] from iocg->local_stat.usage_us so that inuse adjustment
decisions are made based on actual absolute usage. The calculated usage is
clamped between 1 and WEIGHT_ONE and WEIGHT_ONE is also used to signal
saturation regardless of the current hierarchical inuse weight.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, iocost doesn't collect or expose any statistics punting off all
monitoring duties to drgn based iocost_monitor.py. While it works for some
scenarios, there are some usability and data availability challenges. For
example, accurate per-cgroup usage information can't be tracked by vtime
progression at all and the number available in iocg->usages[] are really
short-term snapshots used for control heuristics with possibly significant
errors.
This patch implements per-cgroup absolute usage stat counter and exposes it
through io.stat along with the current vrate. Usage stat collection and
flushing employ the same method as cgroup rstat on the active iocg's and the
only hot path overhead is preemption toggling and adding to a percpu
counter.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, debt handling requires only iocg->waitq.lock. In the future, we
want to adjust and propagate inuse changes depending on debt status. Let's
grab ioc->lock in debt handling paths in preparation.
* Because ioc->lock nests outside iocg->waitq.lock, the decision to grab
ioc->lock needs to be made before entering the critical sections.
* Add and use iocg_[un]lock() which handles the conditional double locking.
* Add @pay_debt to iocg_kick_waitq() so that debt payment happens only when
the caller grabbed both locks.
This patch is prepatory and the comments contain references to future
changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The margin handling was pretty inconsistent.
* ioc->margin_us and ioc->inuse_margin_vtime were used as vtime margin
thresholds. However, the two are in different units with the former
requiring conversion to vtime on use.
* iocg_kick_waitq() was using a quarter of WAITQ_TIMER_MARGIN_PCT of
period_us as the timer slack - ~1.2%. While iocg_kick_delay() was using a
quarter of ioc->margin_us - ~12.5%. There aren't strong reasons to use
different values for the two.
This patch cleans up margin and timer slack handling:
* vtime margins are now recorded in ioc->margins.{min, max} on period
duration changes and used consistently.
* Timer slack is now 1% of period_us and recorded in ioc->timer_slack_ns and
used consistently for iocg_kick_waitq() and iocg_kick_delay().
The only functional change is shortening of timer slack. No meaningful
visible change is expected.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
They are in microseconds and wrap in around 1.2 hours with u32. While
unlikely, confusions from wraparounds are still possible. We aren't saving
anything meaningful by keeping these u32. Let's make them u64.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
To improve weight donations, we want to able to scale inuse with a greater
accuracy and down below 1. Let's make non-hierarchical weights to use
WEIGHT_ONE based fixed point numbers too like hierarchical ones.
This doesn't cause any behavior changes yet.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We're gonna use HWEIGHT_WHOLE for regular weights too. Let's rename it to
WEIGHT_ONE.
Pure rename.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
iocg_kick_waitq() is the function which pays debt and iocg_kick_delay()
updates the actual delay status accordingly. If iocg_kick_delay() is not
called after iocg_kick_delay() updated debt, unnecessarily large delays can
be applied temporarily.
Let's make sure such conditions don't occur by making iocg_kick_waitq()
always call iocg_kick_delay() after paying debt.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We'll make iocg_kick_waitq() call iocg_kick_delay(). Reorder them in
preparation. This is pure code reorganization.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__propagate_weights() currently expects the callers to clamp inuse within
[1, active], which is needlessly fragile. The inuse adjustment logic is
going to be revamped, in preparation, let's make __propagate_weights() clamp
inuse on entry.
Also, make it avoid weight updates altogether if neither active or inuse is
changed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It already propagates two weights - active and inuse - and there will be
another soon. Let's drop the confusing misnomers. Rename
[__]propagate_active_weights() to [__]propagate_weights() and
commit_active_weights() to commit_weights().
This is pure rename.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk-iocost has been reading percpu stat counters from remote cpus which on
some archs can lead to torn reads in really rare occassions. Use local[64]_t
for those counters.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use early returns and goto-based unwinding to simplify the flow a bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The alignment offset is only used in slow path callers, so just calculate
it on the fly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The alignment offset is only used in slow path callers, so just calculate
it on the fly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The small blk_mq_attempt_merge() function is only called by
__blk_mq_sched_bio_merge(), just open code it.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are lots of duplicated code when trying to merge a bio from
plug list and sw queue, we can introduce a new helper to attempt
to merge a bio, which can simplify the blk_bio_list_merge()
and blk_attempt_plug_merge().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the blk_mq_bio_list_merge() into blk-merge.c and
rename it as a generic name.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It's better to move bio merge related functions into blk-merge.c,
which contains all merge related functions.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This comment was added before the multiqueue I/O scheduler framework
was introduced; multiqueue has support for I/O scheduling now, so this
obsolete comment can be removed.
Signed-off-by: Danny Lin <danny@kdrag0n.dev>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just check if there is private data, in which case the bio must have
originated from bio_copy_user_iov.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just duplicate a small amount of code in the low-level map into the bio
and copy to the bio routines, leading to much easier to follow and
maintain code, and better shared error handling.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Open code __blk_rq_unmap_user in the two callers. Both never pass a NULL
bio, and one of them can use an existing local variable instead of the bio
flag.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We can simply use a boolean flag in the bio_map_data data structure
instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Two different callers use two different mutexes for updating the
block device size, which obviously doesn't help to actually protect
against concurrent updates from the different callers. In addition
one of the locks, bd_mutex is rather prone to deadlocks with other
parts of the block stack that use it for high level synchronization.
Switch to using a new spinlock protecting just the size updates, as
that is all we need, and make sure everyone does the update through
the proper helper.
This fixes a bug reported with the nvme revalidating disks during a
hot removal operation, which can currently deadlock on bd_mutex.
Reported-by: Xianting Tian <xianting_tian@126.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block-5.9:
blk-stat: make q->stats->lock irqsafe
blk-iocost: ioc_pd_free() shouldn't assume irq disabled
block: fix locking in bdev_del_partition
block: release disk reference in hd_struct_free_work
block: ensure bdi->io_pages is always initialized
nvme-pci: cancel nvme device request before disabling
nvme: only use power of two io boundaries
nvme: fix controller instance leak
nvmet-fc: Fix a missed _irqsave version of spin_lock in 'nvmet_fc_fod_op_done()'
nvme: Fix NULL dereference for pci nvme controllers
nvme-rdma: fix reset hang if controller died in the middle of a reset
nvme-rdma: fix timeout handler
nvme-rdma: serialize controller teardown sequences
nvme-tcp: fix reset hang if controller died in the middle of a reset
nvme-tcp: fix timeout handler
nvme-tcp: serialize controller teardown sequences
nvme: have nvme_wait_freeze_timeout return if it timed out
nvme-fabrics: don't check state NVME_CTRL_NEW for request acceptance
nvmet-tcp: Fix NULL dereference when a connect data comes in h2cdata pdu
blk-iocost calls blk_stat_enable_accounting() while holding an irqsafe lock
which triggers a lockdep splat because q->stats->lock isn't irqsafe. Let's
make it irqsafe.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: cd006509b0 ("blk-iocost: account for IO size when testing latencies")
Cc: stable@vger.kernel.org # v5.8+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ioc_pd_free() grabs irq-safe ioc->lock without ensuring that irq is disabled
when it can be called with irq disabled or enabled. This has a small chance
of causing A-A deadlocks and triggers lockdep splats. Use irqsave operations
instead.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 7caa47151a ("blkcg: implement blk-iocost")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We need to hold the whole device bd_mutex to protect against
other thread concurrently deleting out partition before we get
to it, and thus causing a use after free.
Fixes: cddae808ae ("block: pass a hd_struct to delete_partition")
Reported-by: syzbot+6448f3c229bc52b82f69@syzkaller.appspotmail.com
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit e8c7d14ac6 ("block: revert back to synchronous request_queue removal")
stops to release request queue from wq context because that commit
supposed all blk_put_queue() is called in context which is allowed
to sleep. However, this assumption isn't true because we release disk's
reference in partition's percpu_ref's ->release() which doesn't allow
to sleep, because the ->release() is run via call_rcu().
Fixes this issue by moving put disk reference into hd_struct_free_work()
Fixes: e8c7d14ac6 ("block: revert back to synchronous request_queue removal")
Reported-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If a driver leaves the limit settings as the defaults, then we don't
initialize bdi->io_pages. This means that file systems may need to
work around bdi->io_pages == 0, which is somewhat messy.
Initialize the default value just like we do for ->ra_pages.
Cc: stable@vger.kernel.org
Fixes: 9491ae4aad ("mm: don't cap request size based on read-ahead setting")
Reported-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=fAwK
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.9-2020-08-23' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request from Sagi:
- nvme completion rework from Christoph and Chao that mostly came
from a bit of divergence of how we classify errors related to
pathing/retry etc.
- nvmet passthru fixes from Chaitanya
- minor nvmet fixes from Amit and I
- mpath round-robin path selection fix from Martin
- ignore noiob for zoned devices from Keith
- minor nvme-fc fix from Tianjia"
- BFQ cgroup leak fix (Dmitry)
- block layer MAINTAINERS addition (Geert)
- fix null_blk FUA checking (Hou)
- get_max_io_size() size fix (Keith)
- fix block page_is_mergeable() for compound pages (Matthew)
- discard granularity fixes (Ming)
- IO scheduler ordering fix (Ming)
- misc fixes
* tag 'io_uring-5.9-2020-08-23' of git://git.kernel.dk/linux-block: (31 commits)
null_blk: fix passing of REQ_FUA flag in null_handle_rq
nvmet: Disable keep-alive timer when kato is cleared to 0h
nvme: redirect commands on dying queue
nvme: just check the status code type in nvme_is_path_error
nvme: refactor command completion
nvme: rename and document nvme_end_request
nvme: skip noiob for zoned devices
nvme-pci: fix PRP pool size
nvme-pci: Use u32 for nvme_dev.q_depth and nvme_queue.q_depth
nvme: Use spin_lock_irq() when taking the ctrl->lock
nvmet: call blk_mq_free_request() directly
nvmet: fix oops in pt cmd execution
nvmet: add ns tear down label for pt-cmd handling
nvme: multipath: round-robin: eliminate "fallback" variable
nvme: multipath: round-robin: fix single non-optimized path case
nvme-fc: Fix wrong return value in __nvme_fc_init_request()
nvmet-passthru: Reject commands with non-sgl flags set
nvmet: fix a memory leak
blkcg: fix memleak for iolatency
MAINTAINERS: Add missing header files to BLOCK LAYER section
...
Normally, blkcg_iolatency_exit() will free related memory in iolatency
when cleanup queue. But if blk_throtl_init() return error and queue init
fail, blkcg_iolatency_exit() will not do that for us. Then it cause
memory leak.
Fixes: d706751215 ("block: introduce blk-iolatency io controller")
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A previous commit aligning splits to physical block sizes inadvertently
modified one return case such that that it now returns 0 length splits
when the number of sectors doesn't exceed the physical offset. This
later hits a BUG in bio_split(). Restore the previous working behavior.
Fixes: 9cc5169cd4 ("block: Improve physical block alignment of split bios")
Reported-by: Eric Deal <eric.deal@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
c616cbee97 ("blk-mq: punt failed direct issue to dispatch list") supposed
to add request which has been through ->queue_rq() to the hw queue dispatch
list, however it adds request running out of budget or driver tag to hw queue
too. This way basically bypasses request merge, and causes too many request
dispatched to LLD, and system% is unnecessary increased.
Fixes this issue by adding request not through ->queue_rq into sw/scheduler
queue, and this way is safe because no ->queue_rq is called on this request
yet.
High %system can be observed on Azure storvsc device, and even soft lock
is observed. This patch reduces %system during heavy sequential IO,
meantime decreases soft lockup risk.
Fixes: c616cbee97 ("blk-mq: punt failed direct issue to dispatch list")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Changes from v1:
- update commit description with proper ref-accounting justification
commit db37a34c56 ("block, bfq: get a ref to a group when adding it to a service tree")
introduce leak forbfq_group and blkcg_gq objects because of get/put
imbalance.
In fact whole idea of original commit is wrong because bfq_group entity
can not dissapear under us because it is referenced by child bfq_queue's
entities from here:
-> bfq_init_entity()
->bfqg_and_blkg_get(bfqg);
->entity->parent = bfqg->my_entity
-> bfq_put_queue(bfqq)
FINAL_PUT
->bfqg_and_blkg_put(bfqq_group(bfqq))
->kmem_cache_free(bfq_pool, bfqq);
So parent entity can not disappear while child entity is in tree,
and child entities already has proper protection.
This patch revert commit db37a34c56 ("block, bfq: get a ref to a group when adding it to a service tree")
bfq_group leak trace caused by bad commit:
-> blkg_alloc
-> bfq_pq_alloc
-> bfqg_get (+1)
->bfq_activate_bfqq
->bfq_activate_requeue_entity
-> __bfq_activate_entity
->bfq_get_entity
->bfqg_and_blkg_get (+1) <==== : Note1
->bfq_del_bfqq_busy
->bfq_deactivate_entity+0x53/0xc0 [bfq]
->__bfq_deactivate_entity+0x1b8/0x210 [bfq]
-> bfq_forget_entity(is_in_service = true)
entity->on_st_or_in_serv = false <=== :Note2
if (is_in_service)
return; ==> do not touch reference
-> blkcg_css_offline
-> blkcg_destroy_blkgs
-> blkg_destroy
-> bfq_pd_offline
-> __bfq_deactivate_entity
if (!entity->on_st_or_in_serv) /* true, because (Note2)
return false;
-> bfq_pd_free
-> bfqg_put() (-1, byt bfqg->ref == 2) because of (Note2)
So bfq_group and blkcg_gq will leak forever, see test-case below.
##TESTCASE_BEGIN:
#!/bin/bash
max_iters=${1:-100}
#prep cgroup mounts
mount -t tmpfs cgroup_root /sys/fs/cgroup
mkdir /sys/fs/cgroup/blkio
mount -t cgroup -o blkio none /sys/fs/cgroup/blkio
# Prepare blkdev
grep blkio /proc/cgroups
truncate -s 1M img
losetup /dev/loop0 img
echo bfq > /sys/block/loop0/queue/scheduler
grep blkio /proc/cgroups
for ((i=0;i<max_iters;i++))
do
mkdir -p /sys/fs/cgroup/blkio/a
echo 0 > /sys/fs/cgroup/blkio/a/cgroup.procs
dd if=/dev/loop0 bs=4k count=1 of=/dev/null iflag=direct 2> /dev/null
echo 0 > /sys/fs/cgroup/blkio/cgroup.procs
rmdir /sys/fs/cgroup/blkio/a
grep blkio /proc/cgroups
done
##TESTCASE_END:
Fixes: db37a34c56 ("block, bfq: get a ref to a group when adding it to a service tree")
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Dmitry Monakhov <dmtrmonakhov@yandex-team.ru>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we pass in an offset which is larger than PAGE_SIZE, then
page_is_mergeable() thinks it's not mergeable with the previous bio_vec,
leading to a large number of bio_vecs being used. Use a slightly more
obvious test that the two pages are compatible with each other.
Fixes: 52d52d1c98 ("block: only allow contiguous page structs in a bio_vec")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When queue_max_discard_segments(q) is 1, blk_discard_mergable() will
return false for discard request, then normal request merge is applied.
However, only queue_max_segments() is checked, so max discard segment
limit isn't respected.
Check max discard segment limit in the request merge code for fixing
the issue.
Discard request failure of virtio_blk is fixed.
Fixes: 6984046608 ("block: fix the DISCARD request merge")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
SCHED_RESTART code path is relied to re-run queue for dispatch requests
in hctx->dispatch. Meantime the SCHED_RSTART flag is checked when adding
requests to hctx->dispatch.
memory barriers have to be used for ordering the following two pair of OPs:
1) adding requests to hctx->dispatch and checking SCHED_RESTART in
blk_mq_dispatch_rq_list()
2) clearing SCHED_RESTART and checking if there is request in hctx->dispatch
in blk_mq_sched_restart().
Without the added memory barrier, either:
1) blk_mq_sched_restart() may miss requests added to hctx->dispatch meantime
blk_mq_dispatch_rq_list() observes SCHED_RESTART, and not run queue in
dispatch side
or
2) blk_mq_dispatch_rq_list still sees SCHED_RESTART, and not run queue
in dispatch side, meantime checking if there is request in
hctx->dispatch from blk_mq_sched_restart() is missed.
IO hang in ltp/fs_fill test is reported by kernel test robot:
https://lkml.org/lkml/2020/7/26/77
Turns out it is caused by the above out-of-order OPs. And the IO hang
can't be observed any more after applying this patch.
Fixes: bd166ef183 ("blk-mq-sched: add framework for MQ capable IO schedulers")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Jeffery <djeffery@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix a kernel-doc warning in block/blk-mq.c:
../block/blk-mq.c:1844: warning: Function parameter or member 'at_head' not described in 'blk_mq_request_bypass_insert'
Fixes: 01e99aeca3 ("blk-mq: insert passthrough request into hctx->dispatch directly")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: André Almeida <andrealmeid@collabora.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: linux-block@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=10Pr
-----END PGP SIGNATURE-----
Merge tag 'block-5.9-2020-08-14' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A few fixes on the block side of things:
- Discard granularity fix (Coly)
- rnbd cleanups (Guoqing)
- md error handling fix (Dan)
- md sysfs fix (Junxiao)
- Fix flush request accounting, which caused an IO slowdown for some
configurations (Ming)
- Properly propagate loop flag for partition scanning (Lennart)"
* tag 'block-5.9-2020-08-14' of git://git.kernel.dk/linux-block:
block: fix double account of flush request's driver tag
loop: unset GENHD_FL_NO_PART_SCAN on LOOP_CONFIGURE
rnbd: no need to set bi_end_io in rnbd_bio_map_kern
rnbd: remove rnbd_dev_submit_io
md-cluster: Fix potential error pointer dereference in resize_bitmaps()
block: check queue's limits.discard_granularity in __blkdev_issue_discard()
md: get sysfs entry after redundancy attr group create
In case of none scheduler, we share data request's driver tag for
flush request, so have to mark the flush request as INFLIGHT for
avoiding double account of this driver tag.
Fixes: 568f270065 ("blk-mq: centralise related handling into blk_mq_get_driver_tag")
Reported-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Matthew Wilcox <willy@infradead.org>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- Untangle the header spaghetti which causes build failures in various
situations caused by the lockdep additions to seqcount to validate that
the write side critical sections are non-preemptible.
- The seqcount associated lock debug addons which were blocked by the
above fallout.
seqcount writers contrary to seqlock writers must be externally
serialized, which usually happens via locking - except for strict per
CPU seqcounts. As the lock is not part of the seqcount, lockdep cannot
validate that the lock is held.
This new debug mechanism adds the concept of associated locks.
sequence count has now lock type variants and corresponding
initializers which take a pointer to the associated lock used for
writer serialization. If lockdep is enabled the pointer is stored and
write_seqcount_begin() has a lockdep assertion to validate that the
lock is held.
Aside of the type and the initializer no other code changes are
required at the seqcount usage sites. The rest of the seqcount API is
unchanged and determines the type at compile time with the help of
_Generic which is possible now that the minimal GCC version has been
moved up.
Adding this lockdep coverage unearthed a handful of seqcount bugs which
have been addressed already independent of this.
While generaly useful this comes with a Trojan Horse twist: On RT
kernels the write side critical section can become preemtible if the
writers are serialized by an associated lock, which leads to the well
known reader preempts writer livelock. RT prevents this by storing the
associated lock pointer independent of lockdep in the seqcount and
changing the reader side to block on the lock when a reader detects
that a writer is in the write side critical section.
- Conversion of seqcount usage sites to associated types and initializers.
-----BEGIN PGP SIGNATURE-----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=7Gj+
-----END PGP SIGNATURE-----
Merge tag 'locking-urgent-2020-08-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Thomas Gleixner:
"A set of locking fixes and updates:
- Untangle the header spaghetti which causes build failures in
various situations caused by the lockdep additions to seqcount to
validate that the write side critical sections are non-preemptible.
- The seqcount associated lock debug addons which were blocked by the
above fallout.
seqcount writers contrary to seqlock writers must be externally
serialized, which usually happens via locking - except for strict
per CPU seqcounts. As the lock is not part of the seqcount, lockdep
cannot validate that the lock is held.
This new debug mechanism adds the concept of associated locks.
sequence count has now lock type variants and corresponding
initializers which take a pointer to the associated lock used for
writer serialization. If lockdep is enabled the pointer is stored
and write_seqcount_begin() has a lockdep assertion to validate that
the lock is held.
Aside of the type and the initializer no other code changes are
required at the seqcount usage sites. The rest of the seqcount API
is unchanged and determines the type at compile time with the help
of _Generic which is possible now that the minimal GCC version has
been moved up.
Adding this lockdep coverage unearthed a handful of seqcount bugs
which have been addressed already independent of this.
While generally useful this comes with a Trojan Horse twist: On RT
kernels the write side critical section can become preemtible if
the writers are serialized by an associated lock, which leads to
the well known reader preempts writer livelock. RT prevents this by
storing the associated lock pointer independent of lockdep in the
seqcount and changing the reader side to block on the lock when a
reader detects that a writer is in the write side critical section.
- Conversion of seqcount usage sites to associated types and
initializers"
* tag 'locking-urgent-2020-08-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
locking/seqlock, headers: Untangle the spaghetti monster
locking, arch/ia64: Reduce <asm/smp.h> header dependencies by moving XTP bits into the new <asm/xtp.h> header
x86/headers: Remove APIC headers from <asm/smp.h>
seqcount: More consistent seqprop names
seqcount: Compress SEQCNT_LOCKNAME_ZERO()
seqlock: Fold seqcount_LOCKNAME_init() definition
seqlock: Fold seqcount_LOCKNAME_t definition
seqlock: s/__SEQ_LOCKDEP/__SEQ_LOCK/g
hrtimer: Use sequence counter with associated raw spinlock
kvm/eventfd: Use sequence counter with associated spinlock
userfaultfd: Use sequence counter with associated spinlock
NFSv4: Use sequence counter with associated spinlock
iocost: Use sequence counter with associated spinlock
raid5: Use sequence counter with associated spinlock
vfs: Use sequence counter with associated spinlock
timekeeping: Use sequence counter with associated raw spinlock
xfrm: policy: Use sequence counters with associated lock
netfilter: nft_set_rbtree: Use sequence counter with associated rwlock
netfilter: conntrack: Use sequence counter with associated spinlock
sched: tasks: Use sequence counter with associated spinlock
...
This series consists of the usual driver updates (ufs, qla2xxx, tcmu,
lpfc, hpsa, zfcp, scsi_debug) and minor bug fixes. We also have a
huge docbook fix update like most other subsystems and no major update
to the core (the few non trivial updates are either minor fixes or
removing an unused feature [scsi_sdb_cache]).
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXyxq1yYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishSoAAQChZ4i8
ZqYW3pL33JO3fA8vdjvLuyC489Hj4wzIsl3/bQEAxYyM6BSLvMoLWR2Plq/JmTLm
4W/LDptarpTiDI3NuDc=
=4b0W
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This consists of the usual driver updates (ufs, qla2xxx, tcmu, lpfc,
hpsa, zfcp, scsi_debug) and minor bug fixes.
We also have a huge docbook fix update like most other subsystems and
no major update to the core (the few non trivial updates are either
minor fixes or removing an unused feature [scsi_sdb_cache])"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (307 commits)
scsi: scsi_transport_srp: Sanitize scsi_target_block/unblock sequences
scsi: ufs-mediatek: Apply DELAY_AFTER_LPM quirk to Micron devices
scsi: ufs: Introduce device quirk "DELAY_AFTER_LPM"
scsi: virtio-scsi: Correctly handle the case where all LUNs are unplugged
scsi: scsi_debug: Implement tur_ms_to_ready parameter
scsi: scsi_debug: Fix request sense
scsi: lpfc: Fix typo in comment for ULP
scsi: ufs-mediatek: Prevent LPM operation on undeclared VCC
scsi: iscsi: Do not put host in iscsi_set_flashnode_param()
scsi: hpsa: Correct ctrl queue depth
scsi: target: tcmu: Make TMR notification optional
scsi: target: tcmu: Implement tmr_notify callback
scsi: target: tcmu: Fix and simplify timeout handling
scsi: target: tcmu: Factor out new helper ring_insert_padding
scsi: target: tcmu: Do not queue aborted commands
scsi: target: tcmu: Use priv pointer in se_cmd
scsi: target: Add tmr_notify backend function
scsi: target: Modify core_tmr_abort_task()
scsi: target: iscsi: Fix inconsistent debug message
scsi: target: iscsi: Fix login error when receiving
...
-----BEGIN PGP SIGNATURE-----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=uMth
-----END PGP SIGNATURE-----
Merge tag 'for-5.9/block-merge-20200804' of git://git.kernel.dk/linux-block
Pull block stacking updates from Jens Axboe:
"The stacking related fixes depended on both the core block and drivers
branches, so here's a topic branch with that change.
Outside of that, a late fix from Johannes for zone revalidation"
* tag 'for-5.9/block-merge-20200804' of git://git.kernel.dk/linux-block:
block: don't do revalidate zones on invalid devices
block: remove blk_queue_stack_limits
block: remove bdev_stack_limits
block: inherit the zoned characteristics in blk_stack_limits
-----BEGIN PGP SIGNATURE-----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=oADH
-----END PGP SIGNATURE-----
Merge tag 'for-5.9/drivers-20200803' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
- NVMe:
- ZNS support (Aravind, Keith, Matias, Niklas)
- Misc cleanups, optimizations, fixes (Baolin, Chaitanya, David,
Dongli, Max, Sagi)
- null_blk zone capacity support (Aravind)
- MD:
- raid5/6 fixes (ChangSyun)
- Warning fixes (Damien)
- raid5 stripe fixes (Guoqing, Song, Yufen)
- sysfs deadlock fix (Junxiao)
- raid10 deadlock fix (Vitaly)
- struct_size conversions (Gustavo)
- Set of bcache updates/fixes (Coly)
* tag 'for-5.9/drivers-20200803' of git://git.kernel.dk/linux-block: (117 commits)
md/raid5: Allow degraded raid6 to do rmw
md/raid5: Fix Force reconstruct-write io stuck in degraded raid5
raid5: don't duplicate code for different paths in handle_stripe
raid5-cache: hold spinlock instead of mutex in r5c_journal_mode_show
md: print errno in super_written
md/raid5: remove the redundant setting of STRIPE_HANDLE
md: register new md sysfs file 'uuid' read-only
md: fix max sectors calculation for super 1.0
nvme-loop: remove extra variable in create ctrl
nvme-loop: set ctrl state connecting after init
nvme-multipath: do not fall back to __nvme_find_path() for non-optimized paths
nvme-multipath: fix logic for non-optimized paths
nvme-rdma: fix controller reset hang during traffic
nvme-tcp: fix controller reset hang during traffic
nvmet: introduce the passthru Kconfig option
nvmet: introduce the passthru configfs interface
nvmet: Add passthru enable/disable helpers
nvmet: add passthru code to process commands
nvme: export nvme_find_get_ns() and nvme_put_ns()
nvme: introduce nvme_ctrl_get_by_path()
...
-----BEGIN PGP SIGNATURE-----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=2vmy
-----END PGP SIGNATURE-----
Merge tag 'for-5.9/io_uring-20200802' of git://git.kernel.dk/linux-block
Pull io_uring updates from Jens Axboe:
"Lots of cleanups in here, hardening the code and/or making it easier
to read and fixing bugs, but a core feature/change too adding support
for real async buffered reads. With the latter in place, we just need
buffered write async support and we're done relying on kthreads for
the fast path. In detail:
- Cleanup how memory accounting is done on ring setup/free (Bijan)
- sq array offset calculation fixup (Dmitry)
- Consistently handle blocking off O_DIRECT submission path (me)
- Support proper async buffered reads, instead of relying on kthread
offload for that. This uses the page waitqueue to drive retries
from task_work, like we handle poll based retry. (me)
- IO completion optimizations (me)
- Fix race with accounting and ring fd install (me)
- Support EPOLLEXCLUSIVE (Jiufei)
- Get rid of the io_kiocb unionizing, made possible by shrinking
other bits (Pavel)
- Completion side cleanups (Pavel)
- Cleanup REQ_F_ flags handling, and kill off many of them (Pavel)
- Request environment grabbing cleanups (Pavel)
- File and socket read/write cleanups (Pavel)
- Improve kiocb_set_rw_flags() (Pavel)
- Tons of fixes and cleanups (Pavel)
- IORING_SQ_NEED_WAKEUP clear fix (Xiaoguang)"
* tag 'for-5.9/io_uring-20200802' of git://git.kernel.dk/linux-block: (127 commits)
io_uring: flip if handling after io_setup_async_rw
fs: optimise kiocb_set_rw_flags()
io_uring: don't touch 'ctx' after installing file descriptor
io_uring: get rid of atomic FAA for cq_timeouts
io_uring: consolidate *_check_overflow accounting
io_uring: fix stalled deferred requests
io_uring: fix racy overflow count reporting
io_uring: deduplicate __io_complete_rw()
io_uring: de-unionise io_kiocb
io-wq: update hash bits
io_uring: fix missing io_queue_linked_timeout()
io_uring: mark ->work uninitialised after cleanup
io_uring: deduplicate io_grab_files() calls
io_uring: don't do opcode prep twice
io_uring: clear IORING_SQ_NEED_WAKEUP after executing task works
io_uring: batch put_task_struct()
tasks: add put_task_struct_many()
io_uring: return locked and pinned page accounting
io_uring: don't miscount pinned memory
io_uring: don't open-code recv kbuf managment
...
-----BEGIN PGP SIGNATURE-----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=abJG
-----END PGP SIGNATURE-----
Merge tag 'for-5.9/block-20200802' of git://git.kernel.dk/linux-block
Pull core block updates from Jens Axboe:
"Good amount of cleanups and tech debt removals in here, and as a
result, the diffstat shows a nice net reduction in code.
- Softirq completion cleanups (Christoph)
- Stop using ->queuedata (Christoph)
- Cleanup bd claiming (Christoph)
- Use check_events, moving away from the legacy media change
(Christoph)
- Use inode i_blkbits consistently (Christoph)
- Remove old unused writeback congestion bits (Christoph)
- Cleanup/unify submission path (Christoph)
- Use bio_uninit consistently, instead of bio_disassociate_blkg
(Christoph)
- sbitmap cleared bits handling (John)
- Request merging blktrace event addition (Jan)
- sysfs add/remove race fixes (Luis)
- blk-mq tag fixes/optimizations (Ming)
- Duplicate words in comments (Randy)
- Flush deferral cleanup (Yufen)
- IO context locking/retry fixes (John)
- struct_size() usage (Gustavo)
- blk-iocost fixes (Chengming)
- blk-cgroup IO stats fixes (Boris)
- Various little fixes"
* tag 'for-5.9/block-20200802' of git://git.kernel.dk/linux-block: (135 commits)
block: blk-timeout: delete duplicated word
block: blk-mq-sched: delete duplicated word
block: blk-mq: delete duplicated word
block: genhd: delete duplicated words
block: elevator: delete duplicated word and fix typos
block: bio: delete duplicated words
block: bfq-iosched: fix duplicated word
iocost_monitor: start from the oldest usage index
iocost: Fix check condition of iocg abs_vdebt
block: Remove callback typedefs for blk_mq_ops
block: Use non _rcu version of list functions for tag_set_list
blk-cgroup: show global disk stats in root cgroup io.stat
blk-cgroup: make iostat functions visible to stat printing
block: improve discard bio alignment in __blkdev_issue_discard()
block: change REQ_OP_ZONE_RESET and REQ_OP_ZONE_RESET_ALL to be odd numbers
block: defer flush request no matter whether we have elevator
block: make blk_timeout_init() static
block: remove retry loop in ioc_release_fn()
block: remove unnecessary ioc nested locking
block: integrate bd_start_claiming into __blkdev_get
...
When we loose a device for whatever reason while (re)scanning zones, we
trip over a NULL pointer in blk_revalidate_zone_cb, like in the following
log:
sd 0:0:0:0: [sda] 3418095616 4096-byte logical blocks: (14.0 TB/12.7 TiB)
sd 0:0:0:0: [sda] 52156 zones of 65536 logical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 37 00 00 08
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] REPORT ZONES start lba 1065287680 failed
sd 0:0:0:0: [sda] REPORT ZONES: Result: hostbyte=0x00 driverbyte=0x08
sd 0:0:0:0: [sda] Sense Key : 0xb [current]
sd 0:0:0:0: [sda] ASC=0x0 ASCQ=0x6
sda: failed to revalidate zones
sd 0:0:0:0: [sda] 0 4096-byte logical blocks: (0 B/0 B)
sda: detected capacity change from 14000519643136 to 0
==================================================================
BUG: KASAN: null-ptr-deref in blk_revalidate_zone_cb+0x1b7/0x550
Write of size 8 at addr 0000000000000010 by task kworker/u4:1/58
CPU: 1 PID: 58 Comm: kworker/u4:1 Not tainted 5.8.0-rc1 #692
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4-rebuilt.opensuse.org 04/01/2014
Workqueue: events_unbound async_run_entry_fn
Call Trace:
dump_stack+0x7d/0xb0
? blk_revalidate_zone_cb+0x1b7/0x550
kasan_report.cold+0x5/0x37
? blk_revalidate_zone_cb+0x1b7/0x550
check_memory_region+0x145/0x1a0
blk_revalidate_zone_cb+0x1b7/0x550
sd_zbc_parse_report+0x1f1/0x370
? blk_req_zone_write_trylock+0x200/0x200
? sectors_to_logical+0x60/0x60
? blk_req_zone_write_trylock+0x200/0x200
? blk_req_zone_write_trylock+0x200/0x200
sd_zbc_report_zones+0x3c4/0x5e0
? sd_dif_config_host+0x500/0x500
blk_revalidate_disk_zones+0x231/0x44d
? _raw_write_lock_irqsave+0xb0/0xb0
? blk_queue_free_zone_bitmaps+0xd0/0xd0
sd_zbc_read_zones+0x8cf/0x11a0
sd_revalidate_disk+0x305c/0x64e0
? __device_add_disk+0x776/0xf20
? read_capacity_16.part.0+0x1080/0x1080
? blk_alloc_devt+0x250/0x250
? create_object.isra.0+0x595/0xa20
? kasan_unpoison_shadow+0x33/0x40
sd_probe+0x8dc/0xcd2
really_probe+0x20e/0xaf0
__driver_attach_async_helper+0x249/0x2d0
async_run_entry_fn+0xbe/0x560
process_one_work+0x764/0x1290
? _raw_read_unlock_irqrestore+0x30/0x30
worker_thread+0x598/0x12f0
? __kthread_parkme+0xc6/0x1b0
? schedule+0xed/0x2c0
? process_one_work+0x1290/0x1290
kthread+0x36b/0x440
? kthread_create_worker_on_cpu+0xa0/0xa0
ret_from_fork+0x22/0x30
==================================================================
When the device is already gone we end up with the following scenario:
The device's capacity is 0 and thus the number of zones will be 0 as well. When
allocating the bitmap for the conventional zones, we then trip over a NULL
pointer.
So if we encounter a zoned block device with a 0 capacity, don't dare to
revalidate the zones sizes.
Fixes: 6c6b354914 ("block: set the zone size in blk_revalidate_disk_zones atomically")
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Drop the repeated word "request".
Change to the correct kernel-doc notation for function name separtor.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Drop the repeated word "to".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Drop the repeated word "the".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Drop the repeated word "to" in multiple places.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Drop the repeated word "the".
Fix typos of "features" and "specified".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Drop the repeated words "a" and "the".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We shouldn't skip iocg when its abs_vdebt is not zero.
Fixes: 0b80f9866e ("iocost: protect iocg->abs_vdebt with iocg->waitq.lock")
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A sequence counter write side critical section must be protected by some
form of locking to serialize writers. A plain seqcount_t does not
contain the information of which lock must be held when entering a write
side critical section.
Use the new seqcount_spinlock_t data type, which allows to associate a
spinlock with the sequence counter. This enables lockdep to verify that
the spinlock used for writer serialization is held when the write side
critical section is entered.
If lockdep is disabled this lock association is compiled out and has
neither storage size nor runtime overhead.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Link: https://lkml.kernel.org/r/20200720155530.1173732-21-a.darwish@linutronix.de
tag_set_list is only accessed under the tag_set_lock lock. There is
no need for using the _rcu list functions.
The _rcu list function were introduced to allow read access to the
tag_set_list protected under RCU, see 705cda97ee ("blk-mq: Make it
safe to use RCU to iterate over blk_mq_tag_set.tag_list") and
05b7941394 ("Revert "blk-mq: don't handle TAG_SHARED in restart"").
Those changes got reverted later but the cleanup commit missed a
couple of places to undo the changes.
Fixes: 97889f9ac2 ("blk-mq: remove synchronize_rcu() from blk_mq_del_queue_tag_set()"
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 05d18ae1cc ("scsi: pm: Balance pm_only counter of request queue
during system resume") fixed a problem in the block layer's runtime-PM
code: blk_set_runtime_active() failed to call blk_clear_pm_only().
However, the commit's implementation was awkward; it forced the SCSI
system-resume handler to choose whether to call blk_post_runtime_resume()
or blk_set_runtime_active(), depending on whether or not the SCSI device
had previously been runtime suspended.
This patch simplifies the situation considerably by adding the missing
function call directly into blk_set_runtime_active() (under the condition
that the queue is not already in the RPM_ACTIVE state). This allows the
SCSI routine to revert back to its original form. Furthermore, making this
change reveals that blk_post_runtime_resume() (in its success pathway) does
exactly the same thing as blk_set_runtime_active(). The duplicate code is
easily removed by making one routine call the other.
No functional changes are intended.
Link: https://lore.kernel.org/r/20200706151436.GA702867@rowland.harvard.edu
CC: Can Guo <cang@codeaurora.org>
CC: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This function is just a tiny wrapper around blk_stack_limits. Open code
it int the two callers.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Tested-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This function is just a tiny wrapper around blk_stack_limit and has
two callers. Simplify the stack a bit by open coding it in the two
callers.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Tested-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Lift the code from device mapper into blk_stack_limits to inherity
the stacking limitations. This ensures we do the right thing for
all stacked zoned block devices.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Tested-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* for-5.9/drivers: (38 commits)
block: add max_active_zones to blk-sysfs
block: add max_open_zones to blk-sysfs
s390/dasd: Use struct_size() helper
s390/dasd: fix inability to use DASD with DIAG driver
md-cluster: fix wild pointer of unlock_all_bitmaps()
md/raid5-cache: clear MD_SB_CHANGE_PENDING before flushing stripes
md: fix deadlock causing by sysfs_notify
md: improve io stats accounting
md: raid0/linear: fix dereference before null check on pointer mddev
rsxx: switch from 'pci_free_consistent()' to 'dma_free_coherent()'
nvme: remove ns->disk checks
nvme-pci: use standard block status symbolic names
nvme-pci: use the consistent return type of nvme_pci_iod_alloc_size()
nvme-pci: add a blank line after declarations
nvme-pci: fix some comments issues
nvme-pci: remove redundant segment validation
nvme: document quirked Intel models
nvme: expose reconnect_delay and ctrl_loss_tmo via sysfs
nvme: support for zoned namespaces
nvme: support for multiple Command Sets Supported and Effects log pages
...
* for-5.9/block: (124 commits)
blk-cgroup: show global disk stats in root cgroup io.stat
blk-cgroup: make iostat functions visible to stat printing
block: improve discard bio alignment in __blkdev_issue_discard()
block: change REQ_OP_ZONE_RESET and REQ_OP_ZONE_RESET_ALL to be odd numbers
block: defer flush request no matter whether we have elevator
block: make blk_timeout_init() static
block: remove retry loop in ioc_release_fn()
block: remove unnecessary ioc nested locking
block: integrate bd_start_claiming into __blkdev_get
block: use bd_prepare_to_claim directly in the loop driver
block: refactor bd_start_claiming
block: simplify the restart case in __blkdev_get
Revert "blk-rq-qos: remove redundant finish_wait to rq_qos_wait."
block: always remove partitions from blk_drop_partitions()
block: relax jiffies rounding for timeouts
blk-mq: remove redundant validation in __blk_mq_end_request()
blk-mq: Remove unnecessary local variable
writeback: remove bdi->congested_fn
writeback: remove struct bdi_writeback_congested
writeback: remove {set,clear}_wb_congested
...
In order to improve consistency and usability in cgroup stat accounting,
we would like to support the root cgroup's io.stat.
Since the root cgroup has processes doing io even if the system has no
explicitly created cgroups, we need to be careful to avoid overhead in
that case. For that reason, the rstat algorithms don't handle the root
cgroup, so just turning the file on wouldn't give correct statistics.
To get around this, we simulate flushing the iostat struct by filling it
out directly from global disk stats. The result is a root cgroup io.stat
file consistent with both /proc/diskstats and io.stat.
Note that in order to collect the disk stats, we needed to iterate over
devices. To facilitate that, we had to change the linkage of a disk_type
to external so that it can be used from blk-cgroup.c to iterate over
disks.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Boris Burkov <boris@bur.io>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Previously, the code which printed io.stat only needed access to the
generic rstat flushing code, but since we plan to write some more
specific code for preparing root cgroup stats, we need to manipulate
iostat structs directly. Since declaring static functions ahead does not
seem like common practice in this file, simply move the iostat functions
up. We only plan to use blkg_iostat_set, but it seems better to keep them
all together.
Signed-off-by: Boris Burkov <boris@bur.io>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch improves discard bio split for address and size alignment in
__blkdev_issue_discard(). The aligned discard bio may help underlying
device controller to perform better discard and internal garbage
collection, and avoid unnecessary internal fragment.
Current discard bio split algorithm in __blkdev_issue_discard() may have
non-discarded fregment on device even the discard bio LBA and size are
both aligned to device's discard granularity size.
Here is the example steps on how to reproduce the above problem.
- On a VMWare ESXi 6.5 update3 installation, create a 51GB virtual disk
with thin mode and give it to a Linux virtual machine.
- Inside the Linux virtual machine, if the 50GB virtual disk shows up as
/dev/sdb, fill data into the first 50GB by,
# dd if=/dev/zero of=/dev/sdb bs=4096 count=13107200
- Discard the 50GB range from offset 0 on /dev/sdb,
# blkdiscard /dev/sdb -o 0 -l 53687091200
- Observe the underlying mapping status of the device
# sg_get_lba_status /dev/sdb -m 1048 --lba=0
descriptor LBA: 0x0000000000000000 blocks: 2048 mapped (or unknown)
descriptor LBA: 0x0000000000000800 blocks: 16773120 deallocated
descriptor LBA: 0x0000000000fff800 blocks: 2048 mapped (or unknown)
descriptor LBA: 0x0000000001000000 blocks: 8386560 deallocated
descriptor LBA: 0x00000000017ff800 blocks: 2048 mapped (or unknown)
descriptor LBA: 0x0000000001800000 blocks: 8386560 deallocated
descriptor LBA: 0x0000000001fff800 blocks: 2048 mapped (or unknown)
descriptor LBA: 0x0000000002000000 blocks: 8386560 deallocated
descriptor LBA: 0x00000000027ff800 blocks: 2048 mapped (or unknown)
descriptor LBA: 0x0000000002800000 blocks: 8386560 deallocated
descriptor LBA: 0x0000000002fff800 blocks: 2048 mapped (or unknown)
descriptor LBA: 0x0000000003000000 blocks: 8386560 deallocated
descriptor LBA: 0x00000000037ff800 blocks: 2048 mapped (or unknown)
descriptor LBA: 0x0000000003800000 blocks: 8386560 deallocated
descriptor LBA: 0x0000000003fff800 blocks: 2048 mapped (or unknown)
descriptor LBA: 0x0000000004000000 blocks: 8386560 deallocated
descriptor LBA: 0x00000000047ff800 blocks: 2048 mapped (or unknown)
descriptor LBA: 0x0000000004800000 blocks: 8386560 deallocated
descriptor LBA: 0x0000000004fff800 blocks: 2048 mapped (or unknown)
descriptor LBA: 0x0000000005000000 blocks: 8386560 deallocated
descriptor LBA: 0x00000000057ff800 blocks: 2048 mapped (or unknown)
descriptor LBA: 0x0000000005800000 blocks: 8386560 deallocated
descriptor LBA: 0x0000000005fff800 blocks: 2048 mapped (or unknown)
descriptor LBA: 0x0000000006000000 blocks: 6291456 deallocated
descriptor LBA: 0x0000000006600000 blocks: 0 deallocated
Although the discard bio starts at LBA 0 and has 50<<30 bytes size which
are perfect aligned to the discard granularity, from the above list
these are many 1MB (2048 sectors) internal fragments exist unexpectedly.
The problem is in __blkdev_issue_discard(), an improper algorithm causes
an improper bio size which is not aligned.
25 int __blkdev_issue_discard(struct block_device *bdev, sector_t sector,
26 sector_t nr_sects, gfp_t gfp_mask, int flags,
27 struct bio **biop)
28 {
29 struct request_queue *q = bdev_get_queue(bdev);
[snipped]
56
57 while (nr_sects) {
58 sector_t req_sects = min_t(sector_t, nr_sects,
59 bio_allowed_max_sectors(q));
60
61 WARN_ON_ONCE((req_sects << 9) > UINT_MAX);
62
63 bio = blk_next_bio(bio, 0, gfp_mask);
64 bio->bi_iter.bi_sector = sector;
65 bio_set_dev(bio, bdev);
66 bio_set_op_attrs(bio, op, 0);
67
68 bio->bi_iter.bi_size = req_sects << 9;
69 sector += req_sects;
70 nr_sects -= req_sects;
[snipped]
79 }
80
81 *biop = bio;
82 return 0;
83 }
84 EXPORT_SYMBOL(__blkdev_issue_discard);
At line 58-59, to discard a 50GB range, req_sects is set as return value
of bio_allowed_max_sectors(q), which is 8388607 sectors. In the above
case, the discard granularity is 2048 sectors, although the start LBA
and discard length are aligned to discard granularity, req_sects never
has chance to be aligned to discard granularity. This is why there are
some still-mapped 2048 sectors fragment in every 4 or 8 GB range.
If req_sects at line 58 is set to a value aligned to discard_granularity
and close to UNIT_MAX, then all consequent split bios inside device
driver are (almostly) aligned to discard_granularity of the device
queue. The 2048 sectors still-mapped fragment will disappear.
This patch introduces bio_aligned_discard_max_sectors() to return the
the value which is aligned to q->limits.discard_granularity and closest
to UINT_MAX. Then this patch replaces bio_allowed_max_sectors() with
this new routine to decide a more proper split bio length.
But we still need to handle the situation when discard start LBA is not
aligned to q->limits.discard_granularity, otherwise even the length is
aligned, current code may still leave 2048 fragment around every 4GB
range. Therefore, to calculate req_sects, firstly the start LBA of
discard range is checked (including partition offset), if it is not
aligned to discard granularity, the first split location should make
sure following bio has bi_sector aligned to discard granularity. Then
there won't be still-mapped fragment in the middle of the discard range.
The above is how this patch improves discard bio alignment in
__blkdev_issue_discard(). Now with this patch, after discard with same
command line mentiond previously, sg_get_lba_status returns,
descriptor LBA: 0x0000000000000000 blocks: 106954752 deallocated
descriptor LBA: 0x0000000006600000 blocks: 0 deallocated
We an see there is no 2048 sectors segment anymore, everything is clean.
Reported-and-tested-by: Acshai Manoj <acshai.manoj@microfocus.com>
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Enzo Matsumiya <ematsumiya@suse.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 7520872c0c ("block: don't defer flushes on blk-mq + scheduling")
tried to fix deadlock for cycled wait between flush requests and data
request into flush_data_in_flight. The former holded all driver tags
and wait for data request completion, but the latter can not complete
for waiting free driver tags.
After commit 923218f616 ("blk-mq: don't allocate driver tag upfront
for flush rq"), flush requests will not get driver tag before queuing
into flush queue.
* With elevator, flush request just get sched_tags before inserting
flush queue. It will not get driver tag until issue them to driver.
data request on list fq->flush_data_in_flight will complete in
the end.
* Without elevator, each flush request will get a driver tag when
allocate request. Then data request on fq->flush_data_in_flight
don't worry about lacking driver tag.
In both of these cases, cycled wait cannot be true. So we may allow
to defer flush request.
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The sparse tool complains as follows:
block/blk-timeout.c:93:12: warning:
symbol 'blk_timeout_init' was not declared. Should it be static?
Function blk_timeout_init() is not used outside of blk-timeout.c, so
mark it static.
Fixes: 9054650fac ("block: relax jiffies rounding for timeouts")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Using uninitialized_var() is dangerous as it papers over real bugs[1]
(or can in the future), and suppresses unrelated compiler warnings
(e.g. "unused variable"). If the compiler thinks it is uninitialized,
either simply initialize the variable or make compiler changes.
In preparation for removing[2] the[3] macro[4], remove all remaining
needless uses with the following script:
git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \
xargs perl -pi -e \
's/\buninitialized_var\(([^\)]+)\)/\1/g;
s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;'
drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid
pathological white-space.
No outstanding warnings were found building allmodconfig with GCC 9.3.0
for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64,
alpha, and m68k.
[1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/
[2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/
[3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/
[4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/
Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5
Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB
Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers
Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs
Signed-off-by: Kees Cook <keescook@chromium.org>
The reverse-order double lock dance in ioc_release_fn() is using a
retry loop. This is a problem on PREEMPT_RT because it could preempt
the task that would release q->queue_lock and thus live lock in the
retry loop.
RCU is already managing the freeing of the request queue and icq. If
the trylock fails, use RCU to guarantee that the request queue and
icq are not freed and re-acquire the locks in the correct order,
allowing forward progress.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The legacy CFQ IO scheduler could call put_io_context() in its exit_icq()
elevator callback. This led to a lockdep warning, which was fixed in
commit d8c66c5d59 ("block: fix lockdep warning on io_context release
put_io_context()") by using a nested subclass for the ioc spinlock.
However, with commit f382fb0bce ("block: remove legacy IO schedulers")
the CFQ IO scheduler no longer exists.
The BFQ IO scheduler also implements the exit_icq() elevator callback but
does not call put_io_context().
The nested subclass for the ioc spinlock is no longer needed. Since it
existed as an exception and no longer applies, remove the nested subclass
usage.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a new max_active zones definition in the sysfs documentation.
This definition will be common for all devices utilizing the zoned block
device support in the kernel.
Export max_active_zones according to this new definition for NVMe Zoned
Namespace devices, ZAC ATA devices (which are treated as SCSI devices by
the kernel), and ZBC SCSI devices.
Add the new max_active_zones member to struct request_queue, rather
than as a queue limit, since this property cannot be split across stacking
drivers.
For SCSI devices, even though max active zones is not part of the ZBC/ZAC
spec, export max_active_zones as 0, signifying "no limit".
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Javier González <javier@javigon.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a new max_open_zones definition in the sysfs documentation.
This definition will be common for all devices utilizing the zoned block
device support in the kernel.
Export max open zones according to this new definition for NVMe Zoned
Namespace devices, ZAC ATA devices (which are treated as SCSI devices by
the kernel), and ZBC SCSI devices.
Add the new max_open_zones member to struct request_queue, rather
than as a queue limit, since this property cannot be split across stacking
drivers.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Javier González <javier@javigon.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit 826f2f48da.
Qian Cai reports that this commit causes stalls with swap. Revert until
the reason can be figured out.
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In theory, when GENHD_FL_NO_PART_SCAN is set, no partitions can be created
on one disk. However, ioctl(BLKPG, BLKPG_ADD_PARTITION) doesn't check
GENHD_FL_NO_PART_SCAN, so partitions still can be added even though
GENHD_FL_NO_PART_SCAN is set.
So far blk_drop_partitions() only removes partitions when disk_part_scan_enabled()
return true. This way can make ghost partition on loop device after changing/clearing
FD in case that PARTSCAN is disabled, such as partitions can be added
via 'parted' on loop disk even though GENHD_FL_NO_PART_SCAN is set.
Fix this issue by always removing partitions in blk_drop_partitions(), and
this way is correct because the current code supposes that no partitions
can be added in case of GENHD_FL_NO_PART_SCAN.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In doing high IOPS testing, blk-mq is generally pretty well optimized.
There are a few things that stuck out as using more CPU than what is
really warranted, and one thing is the round_jiffies_up() that we do
twice for each request. That accounts for about 0.8% of the CPU in
my testing.
We can make this cheaper by avoiding an integer division, by just adding
a rough HZ mask that we can AND with instead. The timeouts are only on a
second granularity already, we don't have to be that accurate here and
this patch barely changes that. All we care about is nice grouping.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We've already validated the 'q->elevator' before calling
->ops.completed_request() in blk_mq_sched_completed_request(), thus no
need to validate rq->internal_tag again. Rmove it.
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove unnecessary local variable 'ret' in blk_mq_dispatch_hctx_list().
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We never set any congested bits in the group writeback instances of it.
And for the simpler bdi-wide case a simple scalar field is all that
that is needed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
md is the last driver using the legacy media_changed method. Switch
it over to (not so) new ->clear_events approach, which also removes the
need for the ->revalidate_disk method.
Signed-off-by: Christoph Hellwig <hch@lst.de>
[axboe: remove unused 'bdops' variable in disk_clear_events()]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move .nr_active update and request assignment into blk_mq_get_driver_tag(),
all are good to do during getting driver tag.
Meantime blk-flush related code is simplified and flush request needn't
to update the request table manually any more.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Current handling of q->mq_ops->queue_rq result is a bit ugly:
- two branches which needs to 'continue' have to check if the
dispatch local list is empty, otherwise one bad request may
be retrieved via 'rq = list_first_entry(list, struct request, queuelist);'
- the branch of 'if (unlikely(ret != BLK_STS_OK))' isn't easy
to follow, since it is actually one error branch.
Streamline this handling, so the code becomes more readable, meantime
potential kernel oops can be avoided in case that the last request in
local dispatch list is failed.
Fixes: fc17b6534e ("blk-mq: switch ->queue_rq return value to blk_status_t")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add support for NVM Express Zoned Namespaces (ZNS) Command Set defined
in NVM Express TP4053. Zoned namespaces are discovered based on their
Command Set Identifier reported in the namespaces Namespace
Identification Descriptor list. A successfully discovered Zoned
Namespace will be registered with the block layer as a host managed
zoned block device with Zone Append command support. A namespace that
does not support append is not supported by the driver.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Javier González <javier.gonz@samsung.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Signed-off-by: Ajay Joshi <ajay.joshi@wdc.com>
Signed-off-by: Aravind Ramesh <aravind.ramesh@wdc.com>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Matias Bjørling <matias.bjorling@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Keith Busch <keith.busch@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
In the zoned storage model, the sectors within a zone are typically all
writeable. With the introduction of the Zoned Namespace (ZNS) Command
Set in the NVM Express organization, the model was extended to have a
specific writeable capacity.
Extend the zone descriptor data structure with a zone capacity field to
indicate to the user how many sectors in a zone are writeable.
Introduce backward compatibility in the zone report ioctl by extending
the zone report header data structure with a flags field to indicate if
the capacity field is available.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Javier González <javier.gonz@samsung.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Matias Bjørling <matias.bjorling@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl8CYDYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGcQkH/2vOsPf79yWtsc7x
hd2LpCPfrm7T1xlQcYcXbEbyRI8sqPmguixO8pRI1ePl2lBZ7KurfyeYgYZNGpFU
t74Ph6A6dSWoCgO68Genm/SQuK8ic6o9n1Vr8tDsGDp5KlHWNaweq4JwHrsPmO1T
cI0PR/ClAhLG8cQZ4x988Es5HTNGY17XK27e+M/zKYxSMGY2NRdJBGQIq964i5Q8
2d9G0rtVCaVDzgjrLwaFm6RBu21Il7HV6KsBsacyTFiL1ywx2vnUHzeZQyvuJSOQ
4YpLo9v4tBP10WHC50LRStZyO0qRwPVd/Yl7fL4R/CKsJT9H4uiwasVoEBVSL/k6
CUn3JL0=
=P/Vx
-----END PGP SIGNATURE-----
Merge tag 'v5.8-rc4' into for-5.9/drivers
Merge in 5.8-rc4 for-5.9/block to setup for-5.9/drivers, to provide
a clean base and making the life for the NVMe changes easier.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* tag 'v5.8-rc4': (732 commits)
Linux 5.8-rc4
x86/ldt: use "pr_info_once()" instead of open-coding it badly
MIPS: Do not use smp_processor_id() in preemptible code
MIPS: Add missing EHB in mtc0 -> mfc0 sequence for DSPen
.gitignore: Do not track `defconfig` from `make savedefconfig`
io_uring: fix regression with always ignoring signals in io_cqring_wait()
x86/ldt: Disable 16-bit segments on Xen PV
x86/entry/32: Fix #MC and #DB wiring on x86_32
x86/entry/xen: Route #DB correctly on Xen PV
x86/entry, selftests: Further improve user entry sanity checks
x86/entry/compat: Clear RAX high bits on Xen PV SYSENTER
i2c: mlxcpld: check correct size of maximum RECV_LEN packet
i2c: add Kconfig help text for slave mode
i2c: slave-eeprom: update documentation
i2c: eg20t: Load module automatically if ID matches
i2c: designware: platdrv: Set class based on DMI
i2c: algo-pca: Add 0x78 as SCL stuck low status for PCA9665
mm/page_alloc: fix documentation error
vmalloc: fix the owner argument for the new __vmalloc_node_range callers
mm/cma.c: use exact_nid true to fix possible per-numa cma leak
...
If blk_mq_submit_bio flushes the plug list, bios for other disks can
show up on current->bio_list. As that doesn't involve any stacking of
block device it is entirely harmless and we should not warn about
this case.
Fixes: ff93ea0ce7 ("block: shortcut __submit_bio_noacct for blk-mq drivers")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
dm-multipath is the only user of blk_mq_queue_inflight(). When
dm-multipath calls blk_mq_queue_inflight() to check if it has
outstanding IO it can get a false negative. The reason for this is
blk_mq_rq_inflight() doesn't consider requests that are no longer
MQ_RQ_IN_FLIGHT but that are now MQ_RQ_COMPLETE (->complete isn't
called or finished yet) as "inflight".
This causes request-based dm-multipath's dm_wait_for_completion() to
return before all outstanding dm-multipath requests have actually
completed. This breaks DM multipath's suspend functionality because
blk-mq requests complete after DM's suspend has finished -- which
shouldn't happen.
Fix this by considering any request not in the MQ_RQ_IDLE state
(so either MQ_RQ_COMPLETE or MQ_RQ_IN_FLIGHT) as "inflight" in
blk_mq_rq_inflight().
Fixes: 3c94d83cb3 ("blk-mq: change blk_mq_queue_busy() to blk_mq_queue_inflight()")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=dhze
-----END PGP SIGNATURE-----
Merge tag 'block-5.8-2020-07-05' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe fixes from Christoph:
- Fix crash in multi-path disk add (Christoph)
- Fix ignore of identify error (Sagi)
- Fix a compiler complaint that a function should be static (Wei)
* tag 'block-5.8-2020-07-05' of git://git.kernel.dk/linux-block:
block: make function __bio_integrity_free() static
nvme: fix a crash in nvme_mpath_add_disk
nvme: fix identify error status silent ignore
bio_alloc_bioset references current->bio_list[1], so we need to
initialize it for the blk-mq submission path as well.
Fixes: ff93ea0ce7 ("block: shortcut __submit_bio_noacct for blk-mq drivers")
Reported-by: Qian Cai <cai@lca.pw>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix sparse build warning:
block/bio-integrity.c:27:6: warning:
symbol '__bio_integrity_free' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ktime_to_ns(ktime_get()), which is expensive, does not need to be called
if blk_iolatency_enabled() return false in blkcg_iolatency_done_bio().
Postponing ktime_to_ns(ktime_get()) execution reduces the CPU usage when
blk_iolatency is disabled.
Signed-off-by: Hongnan Li <hongnan.li@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that submit_bio_noacct has a decent blk-mq fast path there is no
more need for this bypass.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For blk-mq drivers bios can only be inserted for the same queue. So
bypass the complicated sorting logic in __submit_bio_noacct with
a blk-mq simpler submission helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Split out a __submit_bio_noacct helper for the actual de-recursion
algorithm, and simplify the loop by using a continue when we can't
enter the queue for a bio.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
generic_make_request has always been very confusingly misnamed, so rename
it to submit_bio_noacct to make it clear that it is submit_bio minus
accounting and a few checks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The make_request_fn is a little weird in that it sits directly in
struct request_queue instead of an operation vector. Replace it with
a block_device_operations method called submit_bio (which describes much
better what it does). Also remove the request_queue argument to it, as
the queue can be derived pretty trivially from the bio.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The variable is only used once, so just open code the bio_sector()
there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All registers disks must have a valid queue pointer, so don't bother to
log a warning for that case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The "generic_make_request: " prefix has no value, and will soon become
stale.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The queue can be trivially derived from the bio, so pass one less
argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just use rq directly, the usage of list_entry_rq() doesn't make any
sense.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is a statement that is indented one level too deeply, fix it
by removing a tab.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move .nr_active update and request assignment into blk_mq_get_driver_tag(),
all are good to do during getting driver tag.
Meantime blk-flush related code is simplified and flush request needn't
to update the request table manually any more.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It is used by blk-mq.c only, so move it to the source file.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_mq_get_driver_tag() is only used by blk-mq.c and is supposed to
stay in blk-mq.c, so move it and preparing for cleanup code of
get/put driver tag.
Meantime hctx_may_queue() is moved to header file and it is fine
since it is defined as inline always.
No functional change.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
More and more drivers want to get batching requests queued from
block layer, such as mmc, and tcp based storage drivers. Also
current in-tree users have virtio-scsi, virtio-blk and nvme.
For none, we already support batching dispatch.
But for io scheduler, every time we just take one request from scheduler
and pass the single request to blk_mq_dispatch_rq_list(). This way makes
batching dispatch not possible when io scheduler is applied. One reason
is that we don't want to hurt sequential IO performance, becasue IO
merge chance is reduced if more requests are dequeued from scheduler
queue.
Try to support batching dispatch for io scheduler by starting with the
following simple approach:
1) still make sure we can get budget before dequeueing request
2) use hctx->dispatch_busy to evaluate if queue is busy, if it is busy
we fackback to non-batching dispatch, otherwise dequeue as many as
possible requests from scheduler, and pass them to blk_mq_dispatch_rq_list().
Wrt. 2), we use similar policy for none, and turns out that SCSI SSD
performance got improved much.
In future, maybe we can develop more intelligent algorithem for batching
dispatch.
Baolin has tested this patch and found that MMC performance is improved[3].
[1] https://lore.kernel.org/linux-block/20200512075501.GF1531898@T590/#r
[2] https://lore.kernel.org/linux-block/fe6bd8b9-6ed9-b225-f80c-314746133722@grimberg.me/
[3] https://lore.kernel.org/linux-block/CADBw62o9eTQDJ9RvNgEqSpXmg6Xcq=2TxH0Hfxhp29uF2W=TXA@mail.gmail.com/
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Baolin Wang <baolin.wang7@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Baolin Wang <baolin.wang7@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass obtained budget count to blk_mq_dispatch_rq_list(), and prepare
for supporting fully batching submission.
With the obtained budget count, it is easier to put extra budgets
in case of .queue_rq failure.
Meantime remove the old 'got_budget' parameter.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Baolin Wang <baolin.wang7@gmail.com>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Baolin Wang <baolin.wang7@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When BLK_STS_RESOURCE or BLK_STS_DEV_RESOURCE is returned from
.queue_rq, the 'list' variable always holds this rq which isn't
queued to LLD successfully.
So blk_mq_dispatch_rq_list() always returns false from the branch
of '!list_empty(list)'.
No functional change.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Baolin Wang <baolin.wang7@gmail.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Baolin Wang <baolin.wang7@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move code for getting driver tag and budget into one helper, so
blk_mq_dispatch_rq_list gets a bit simplified, and easier to read.
Meantime move updating of 'no_tag' and 'no_budget_available' into
the branch for handling partial dispatch because that is exactly
consumer of the two local variables.
Also rename the parameter of 'got_budget' as 'ask_budget'.
No functional change.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Baolin Wang <baolin.wang7@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Baolin Wang <baolin.wang7@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All requests in the 'list' of blk_mq_dispatch_rq_list belong to same
hctx, so it is better to pass hctx instead of request queue, because
blk-mq's dispatch target is hctx instead of request queue.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Baolin Wang <baolin.wang7@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Baolin Wang <baolin.wang7@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk-mq budget is abstract from scsi's device queue depth, and it is
always per-request-queue instead of hctx.
It can be quite absurd to get a budget from one hctx, then dequeue a
request from scheduler queue, and this request may not belong to this
hctx, at least for bfq and deadline.
So fix the mess and always pass request queue to get/put budget
callback.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Baolin Wang <baolin.wang7@gmail.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Baolin Wang <baolin.wang7@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make blk_ksm_destroy() use the kvfree_sensitive() function (which was
introduced in v5.8-rc1) instead of open-coding it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just check for a non-NULL elevator directly to make the code more clear.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It is natural to release driver tag when this request is completed by
LLD or device since its purpose is for LLD use.
One big benefit is that the released tag can be re-used quicker since
bio_endio() may take too long.
Meantime we don't need to release driver tag for flush request.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bios must have a valid block group by the time they are submitted.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blkcg_bio_issue_check is a giant inline function that does three entirely
different things. Factor out the blk-cgroup related bio initalization
into a new helper, and the open code the sequence in the only caller,
relying on the fact that all the actual functionality is stubbed out for
non-cgroup builds.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The only thing in blkcg_bio_issue_check that needs to be under
rcu_read_lock is blk_throtl_bio, so move the locking there.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
By moving the initial blkg lookup into blkg_tryget_closest we get
a nicely self contained routines that does all the RCU locking.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The root_blkg is only torn down at the very end of removing a queue.
So in the I/O submission path is always has a life reference and we
can just grab another one using blkg_get instead of doing a tryget
and parent walk that won't lead anywhere.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
No good reason to keep these two functions split.
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bio_associate_blkg_from_page is a special purpose helper for swap bios
that doesn't need access to bio internals. Move it to the swap code
instead of having it in bio.c.
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge __bio_associate_blkg into the only caller, which allows to slightly
reduce the RCU crticial section and better explain the code flow.
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bio_clone_blkg_association is supposed to clone the associatation, but
actually ends up doing a search with a tryget. As we know we have a
reference on the source cgroup just get an unconditional additional
reference to it and call it a day. That also removes the need for
a RCU critical section.
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bio_disassociate_blkg has two callers, of which one immediately assigns
a new value to >bi_blkg. Just open code the function in the two callers.
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Else there may be magic numbers in /sys/kernel/debug/block/*/state.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It is no need do finish_wait twice after acquiring inflight.
Signed-off-by: Guo Xuenan <guoxuenan@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=pQH7
-----END PGP SIGNATURE-----
Merge tag 'block-5.8-2020-06-26' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request from Christoph:
- multipath deadlock fixes (Anton)
- NUMA fixes (Max)
- RDMA completion vector fix (Max)
- IO deadlock fix (Sagi)
- multipath reference fix (Sagi)
- NS mutation fix (Sagi)
- Use right allocator when freeing bip in error path (Chengguang)
* tag 'block-5.8-2020-06-26' of git://git.kernel.dk/linux-block:
nvme-multipath: fix bogus request queue reference put
nvme-multipath: fix deadlock due to head->lock
nvme: don't protect ns mutation with ns->head->lock
nvme-multipath: fix deadlock between ana_work and scan_work
nvme: fix possible deadlock when I/O is blocked
nvme-rdma: assign completion vector correctly
nvme-loop: initialize tagset numa value to the value of the ctrl
nvme-tcp: initialize tagset numa value to the value of the ctrl
nvme-pci: initialize tagset numa value to the value of the ctrl
nvme-pci: override the value of the controller's numa node
nvme: set initial value for controller's numa node
block: release bip in a right way in error path
Currently blk-mq does not report any event when two requests get merged
in the elevator. This then results in difficult to understand sequence
of events like:
...
8,0 34 1579 0.608765271 2718 I WS 215023504 + 40 [dbench]
8,0 34 1584 0.609184613 2719 A WS 215023544 + 56 <- (8,4) 2160568
8,0 34 1585 0.609184850 2719 Q WS 215023544 + 56 [dbench]
8,0 34 1586 0.609188524 2719 G WS 215023544 + 56 [dbench]
8,0 3 602 0.609684162 773 D WS 215023504 + 96 [kworker/3:1H]
8,0 34 1591 0.609843593 0 C WS 215023504 + 96 [0]
and you can only guess (after quite some headscratching since the above
excerpt is intermixed with a lot of other IO) that request 215023544+56
got merged to request 215023504+40. Provide proper event for request
merging like we used to do in the legacy block layer.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.
This code was detected with the help of Coccinelle and, audited and
fixed manually.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Addresses-KSPP-ID: https://github.com/KSPP/linux/issues/83
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.
This code was detected with the help of Coccinelle and, audited and
fixed manually.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Addresses-KSPP-ID: https://github.com/KSPP/linux/issues/83
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We were only creating the request_queue debugfs_dir only
for make_request block drivers (multiqueue), but never for
request-based block drivers. We did this as we were only
creating non-blktrace additional debugfs files on that directory
for make_request drivers. However, since blktrace *always* creates
that directory anyway, we special-case the use of that directory
on blktrace. Other than this being an eye-sore, this exposes
request-based block drivers to the same debugfs fragile
race that used to exist with make_request block drivers
where if we start adding files onto that directory we can later
run a race with a double removal of dentries on the directory
if we don't deal with this carefully on blktrace.
Instead, just simplify things by always creating the request_queue
debugfs_dir on request_queue registration. Rename the mutex also to
reflect the fact that this is used outside of the blktrace context.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit dc9edc44de ("block: Fix a blk_exit_rl() regression") merged on
v4.12 moved the work behind blk_release_queue() into a workqueue after a
splat floated around which indicated some work on blk_release_queue()
could sleep in blk_exit_rl(). This splat would be possible when a driver
called blk_put_queue() or blk_cleanup_queue() (which calls blk_put_queue()
as its final call) from an atomic context.
blk_put_queue() decrements the refcount for the request_queue kobject, and
upon reaching 0 blk_release_queue() is called. Although blk_exit_rl() is
now removed through commit db6d995235 ("block: remove request_list code")
on v5.0, we reserve the right to be able to sleep within
blk_release_queue() context.
The last reference for the request_queue must not be called from atomic
context. *When* the last reference to the request_queue reaches 0 varies,
and so let's take the opportunity to document when that is expected to
happen and also document the context of the related calls as best as
possible so we can avoid future issues, and with the hopes that the
synchronous request_queue removal sticks.
We revert back to synchronous request_queue removal because asynchronous
removal creates a regression with expected userspace interaction with
several drivers. An example is when removing the loopback driver, one
uses ioctls from userspace to do so, but upon return and if successful,
one expects the device to be removed. Likewise if one races to add another
device the new one may not be added as it is still being removed. This was
expected behavior before and it now fails as the device is still present
and busy still. Moving to asynchronous request_queue removal could have
broken many scripts which relied on the removal to have been completed if
there was no error. Document this expectation as well so that this
doesn't regress userspace again.
Using asynchronous request_queue removal however has helped us find
other bugs. In the future we can test what could break with this
arrangement by enabling CONFIG_DEBUG_KOBJECT_RELEASE.
While at it, update the docs with the context expectations for the
request_queue / gendisk refcount decrement, and make these
expectations explicit by using might_sleep().
Fixes: dc9edc44de ("block: Fix a blk_exit_rl() regression")
Suggested-by: Nicolai Stange <nstange@suse.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Nicolai Stange <nstange@suse.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: yu kuai <yukuai3@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Let us clarify the context under which the helpers to increment the
refcount for the gendisk and request_queue can be called under. We
make this explicit on the places where we may sleep with might_sleep().
We don't address the decrement context yet, as that needs some extra
work and fixes, but will be addressed in the next patch.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This adds documentation for the gendisk / request_queue refcount
helpers.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is a variant of blk_mq_complete_request_remote that only completes
the request if it needs to be bounced to another CPU or a softirq. If
the request can be completed locally the function returns false and lets
the driver complete it without requring and indirect function call.
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a helper to decide if we can complete locally or need an IPI.
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We don't really care if we get migrated during the I/O completion.
In the worth case we either perform an IPI that wasn't required, or
complete the request on a CPU which we just migrated off.
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the call to blk_should_fake_timeout out of blk_mq_complete_request
and into the drivers, skipping call sites that are obvious error
handlers, and remove the now superflous blk_mq_force_complete_rq helper.
This ensures we don't keep injecting errors into completions that just
terminate the Linux request after the hardware has been reset or the
command has been aborted.
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Both the softirq path for single queue devices and the multi-queue
completion handler share the same logic to figure out if we need an
IPI for the completion and eventually issue it. Merge the two
versions into a single unified code path.
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Baolin Wang