Commit Graph

121 Commits

Author SHA1 Message Date
Harald Krapfenbauer 9c21453e37 Blackfin: update cm board resources
Signed-off-by: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:46 -04:00
Barry Song dac981740f Blackfin: delete '-spi' suffix in ad1836/ad1938 driver name
The ASoC drivers have dropped the redundant "-spi" suffix in the driver
name, so update the board resources accordingly.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:27 -04:00
Mike Frysinger 0198b3bcae Blackfin: drop board resources for dead devices (pbx/ad9960)
These hardware devices are dead and the drivers never cleaned up/merged,
so punt the useless board resource info.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:24 -04:00
Yi Li bd411b15cc Blackfin: update anomaly lists
Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:16 -04:00
Barry Song b3dec4a4ff Blackfin: cm-bf527/bf537-stamp: fix dm9000 resources
The dm9000 driver expects two IORESOURCE_MEM to get at the device, so make
sure we declare things properly.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:10 -04:00
Mike Frysinger 8d71e07596 Blackfin: drop unused MMR defines that only cause bad code to be written
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:09:55 -04:00
Michael Hennerich 61f09b5a09 Blackfin: convert boards to use platform data with smc91x
Latest smc91x driver allows you to specify settings in board resources
rather than needing CONFIG_BLACKFIN in the drivers/net/smc91x.h header.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 21:32:00 -04:00
Jean Delvare 8fc4dd9e87 Blackfin: clean up duplicate I2C device type definitions
I2C_BOARD_INFO() already sets .type, no need to set it again.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 21:31:53 -04:00
Michael Hennerich 204844ebd0 Blackfin: rename PCF8574 driver config
The "TWI_KEYPAD" driver was renamed to "INPUT_PCF8574", so update the
defines in the board resources accordingly.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 21:28:57 -04:00
Michael Hennerich ebd5833327 Blackfin: fix incomplete renaming of the bfin-twi-lcd driver
The sed used to rename the bfin-twi-lcd only replaced the first instance
rather than all which led to the resources not being enabled when the
driver was built as a module.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-16 01:52:32 -04:00
Sonic Zhang f1c717fbf8 Blackfin: fix wrong CTS inversion
The Blackfin serial headers were inverting the CTS value leading to wrong
handling of the CTS line which broke CTS/RTS handling completely.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-16 01:52:30 -04:00
Graf Yang 976119bc5d Blackfin: update anomaly lists to match latest sheets/usage
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-16 01:52:17 -04:00
Mike Frysinger 3a7f5b1605 Blackfin: drop unused ISP1760 port1_disable from board resources
The port1 disable stuff was dropped from the USB ISP1760, so update the
Blackfin boards accordingly.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22 21:16:13 -04:00
Mike Frysinger fa48f84a8c Blackfin: unify memory map headers
Many aspects of the Blackfin memory map is exactly the same across all
variants.  Rather than copy and paste all of these duplicated values in
each header, unify all of these into the common Blackfin memory map header
file.  In the process, push down BF561 SMP specific stuff to the BF561
specific header to keep the noise down.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22 21:16:07 -04:00
Graf Yang dc2c46bb70 Blackfin: bf526-ezbrd: set SPI flash resources to SST device
The BF526-EZBRD has a SST SPI flash on it, not a ST Micro.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22 21:15:49 -04:00
Mike Frysinger a200ad22bb Blackfin: update anomaly lists
Update anomaly headers to match latest released anomaly sheets.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22 21:15:38 -04:00
Yi Li 53122693c3 Blackfin: define SPI IRQ in board resources
The Blackfin SPI driver can be driven by an IRQ now, so declare it in
the board resources.

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13 07:20:10 -04:00
Mike Frysinger a261eec000 Blackfin: rename some Blackfin drivers
Try to keep the naming conventions consistent, so:
	SPI_ADC_BF533 -> BFIN_SPI_ADC
	TWI_LCD       -> BFIN_TWI_LCD

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 06:11:41 -04:00
Graf Yang 1fa9be72b5 Blackfin: add support for gptimer0 as a tick source
For systems where the core cycles are not a usable tick source (like SMP
or cycles gets updated), enable gptimer0 as an alternative.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 06:11:37 -04:00
Mike Frysinger a413647bb5 Blackfin: pull updated anomaly lists from toolchain
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-06-12 06:03:47 -04:00
Yi Li ffdf3ec806 Blackfin: bf527-ezkit: add support for mmc-spi
Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-06-12 06:03:43 -04:00
Sonic Zhang d307d36ade tty: Blackin CTS/RTS
Both software emulated and hardware based CTS and RTS are enabled in
serial driver.

The CTS RTS PIN connection on BF548 UART port is defined as a modem
device not as a host device.  In order to test it under Linux, please
nake a cross UART cable to exchange CTS and RTS signal.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:44:05 -07:00
Sonic Zhang 6f95570e40 Change hardware flow control from poll to interrupt driven
Only the CTS bit is affected.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:44:05 -07:00
Mike Frysinger 269647dc8f Blackfin arch: convert BF5{18,27,48}_FAMILY to CONFIG_BF{51,52,54}x
convert BF5{18,27,48}_FAMILY to CONFIG_BF{51,52,54}x as the defines
are redundant in these cases

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-28 20:32:57 +08:00
Michael Hennerich f3f704d375 Blackfin arch: SPI_MMC is now mainlined MMC_SPI
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-06 00:27:57 +08:00
Mike Frysinger 7dbc3f6ead Blackfin arch: add stubs for anomalies 447 and 448
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-06 00:20:49 +08:00
Mike Frysinger c18e99cfba Blackfin arch: update anomaly sheets to match latest public info
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-04 17:36:49 +08:00
Tom Parker 97d4b35fb4 Blackfin arch: fix bug - Error if one serial has hardware flow control and the other doesn't
I have a system where UART0 is configured with hardware flow control, but UART1
doesn't have it enabled. Attempting to access UART1 in this configuration
results in the following error in dmesg:

<3>bfin-gpio: GPIO 0 is already reserved as Peripheral by bfin-uart !
<5>Stack from 0082bc7c:
<5>        0082bc88 00404dd6 00000003 00000000 0054051e 004079da 0082bcb4
00000000
<5>        00000003 00000000 0052686c 0113f2a0 005fa3f0 00000032 20515249
00003035
<5>        00427228 00526e50 0113f2e0 005fa3f0 00000032 0113f2e0 0054b748
0000ffff
<5>        22222222 22222222 004e1628 00427304 00000000 00000032 00000023
0054b748
<5>        00487a94 0054b7e8 0054b748 0000000b 00487fb8 0054b748 0054b748
00000001
<5>        0000000a 005fa3f0 009d4fe8 0101e3c0 0054b748 005fa3f0 0050b134
0054b748
<5>
<5>Call Trace:
<4>[<00485c16>] _uart_startup+0x56/0x178
<4>[<004865c8>] _uart_open+0x40/0x3e0
<4>[<0048661c>] _uart_open+0x94/0x3e0
<4>[<0047f1ce>] _init_dev+0x1fa/0x450
<4>[<004e1628>] ___mutex_unlock_slowpath+0x30/0xe8
<4>[<004815da>] _tty_open+0xf6/0x21c
<4>[<0043dab0>] ___path_lookup_intent_open+0x34/0x7c
<4>[<004375e4>] _chrdev_open+0x7c/0x134
<4>[<0043dc2c>] _open_namei+0x60/0x568
<4>[<00433fa2>] ___dentry_open+0x9e/0x188
<4>[<00437568>] _chrdev_open+0x0/0x134
<4>[<0043410c>] _nameidata_to_filp+0x30/0x3c
<4>[<00434152>] _do_filp_open+0x3a/0x44
<4>[<00408826>] _task_running_tick+0x102/0x278
<4>[<0043418e>] _do_sys_open+0x32/0xac
<4>[<0043ede4>] _sys_ioctl+0x28/0x50
<4>[<0043edbc>] _sys_ioctl+0x0/0x50
<4>[<00434224>] _sys_open+0x18/0x20
<4>[<0043420c>] _sys_open+0x0/0x20
<4>[<00418174>] _sys_setuid+0x0/0xc8

This is because the #ifdef's in bfin_serial_5xx.h are messed up. More
specifically, they add/remove the uart_{rts,cts}_pin fields in
bfin_serial_resources based on whether the particular port has rts/cts enabled,
as opposed to when either port has it enabled.

This patch fixed this.

Signed-off-by: Tom Parker <blackfin@tevp.net>
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-03 17:59:39 +08:00
Mike Frysinger ee554be9dd Blackfin arch: fix compile failure when missing the anomaly definition
make sure ANOMALY_05000278/ANOMALY_05000380 is defined for all parts

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-03 16:52:55 +08:00
Graf Yang 65319628db Blackfin arch: add platform device bfin_mii-bus and KSZ8893M switch driver platform resources to board files
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04 16:49:45 +08:00
Mike Frysinger 7f6678c52f Blackfin arch: fixup board init function name
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04 16:49:45 +08:00
Mike Frysinger 2678479c33 Blackfin arch: drop CONFIG_I2C_BOARDINFO ifdefs
Drop CONFIG_I2C_BOARDINFO ifdefs as the common i2c header handles this
already by stubbing things out

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04 16:49:45 +08:00
Sonic Zhang b52dae3139 Blackfin arch: Fix bug - Run "reboot" hangs bf518-ezbrd
[Mike Frysinger <vapier.adi@gmail.com>:
 - setup P_DEFAULT_BOOT_SPI_CS  for every arch based on
   the default bootrom behavior and convert all our boards
   to it
 - revert previous anomaly change ... bf51x is not affected
   by anomaly 05000353]

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04 16:49:45 +08:00
Robin Getz 06af15e086 Blackfin arch: fix bug - BF527 0.2 silicon has different CPUID (DSPID) value
BF523/5/7 == 27e0 (all revs)
BF522/4/6 == 27e4 (all revs)

Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07 23:14:39 +08:00
Mike Frysinger 8f9f0e2f5c Blackfin arch: add () to avoid warnings from gcc
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07 23:14:38 +08:00
Yi Li 6a01f23033 Blackfin arch: merge adeos blackfin part to arch/blackfin/
[Mike Frysinger <vapier.adi@gmail.com>:
 - handle bf531/bf532/bf534/bf536 variants in ipipe.h
 - cleanup IPIPE logic for bfin_set_irq_handler()
 - cleanup ipipe asm code a bit and add missing ENDPROC()
 - simplify IPIPE code in trap_c
 - unify some of the IPIPE code and fix style
 - simplify DO_IRQ_L1 handling with ipipe code
 - revert IRQ_SW_INT# addition from ipipe merge
 - remove duplicate get_{c,s}clk() prototypes
]

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07 23:14:39 +08:00
Michael Hennerich 5105432a32 Blackfin arch: Add AD7879 defaults for the Blackfin Landscape LCD EZ-Extender
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07 23:14:38 +08:00
Mike Frysinger 6651ece9e2 Blackfin arch: update anomaly headers to match latest sheets
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07 23:14:38 +08:00
Bryan Wu fea05dacda Blackfin arch: Fix bug - wrong endpoint number and dma channels of USB
Blackfin MUSB has 8 endpoints including ep0 and 8 dma channels not 7

Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07 23:14:39 +08:00
Graf Yang 3d7c603ed4 Blackfin arch: Remove wasted SIR header files
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07 23:14:39 +08:00
Graf Yang 42bd8bcb2f Blackfin arch: Modify bfin_sir device configuration to board file
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07 23:14:39 +08:00
Mike Frysinger b03f203986 Blackfin arch: cleanup - use scm for changelog, not file headers
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07 23:14:38 +08:00
Yi Li 0c720da35c Blackfin arch: Retire old spi_mmc driver
Turn to use the mmc_spi driver in mainline kernel.

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07 23:14:39 +08:00
Mike Frysinger 211daf9d72 Blackfin arch: rename MAX_BLACKFIN_DMA_CHANNEL to MAX_DMA_CHANNELS to match everyone else
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07 23:14:39 +08:00
Graf Yang dbc895f955 Blackfin arch: smp patch cleanup from LKML review
1. Use inline get_l1_... functions instead of macro
2. Fix compile issue about smp barrier functions

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07 23:14:39 +08:00
Michael Hennerich 983e101605 Blackfin arch: gpio.h split into machine subfolders like already done for BF54x
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07 23:14:39 +08:00
Michael Hennerich 73feb5c09d Blackfin arch: fix bugs and unify BFIN_KERNEL_CLOCK option
- remove duplicated code and headers
 - add option allowing arbitrary SDRAM/DDR Timing parameters.
 - mark automatically calculated timings as EXPERIMENTAL
 - fix comment header block

Related to BUGs:
 - kernel boot up fails with CONFIG_BFIN_KERNEL_CLOCK item on.
 - kernel does not boot if re-program clocks

[ Mike Frysinger <vapier.adi@gmail.com>
 - fix comment header
 - mark do_sync static
 - document the DMA shutdown
 - simplify SIC_IWR handling
 - fix ANOMALY_05000265 handling to work as intended ]

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07 23:14:39 +08:00
Mike Frysinger 94b28211d8 Blackfin arch: add ANOMALY_05000435 to our headers
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18 17:48:21 +08:00
Mike Frysinger b60705765a Blackfin arch: move out irq related functions
move irq related functions into asm/irq.h and out of the mondo asm/system.h

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18 17:48:22 +08:00
Mike Frysinger 53442e1cbd Blackfin arch: delay PLL_CTL/VR_CTL wrappers
Delay PLL_CTL/VR_CTL wrappers as much as possible to avoid
the inter-dependency problems with cdef and common headers

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18 17:48:22 +08:00