Commit Graph

3395 Commits

Author SHA1 Message Date
Linus Torvalds f9da455b93 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:

 1) Seccomp BPF filters can now be JIT'd, from Alexei Starovoitov.

 2) Multiqueue support in xen-netback and xen-netfront, from Andrew J
    Benniston.

 3) Allow tweaking of aggregation settings in cdc_ncm driver, from Bjørn
    Mork.

 4) BPF now has a "random" opcode, from Chema Gonzalez.

 5) Add more BPF documentation and improve test framework, from Daniel
    Borkmann.

 6) Support TCP fastopen over ipv6, from Daniel Lee.

 7) Add software TSO helper functions and use them to support software
    TSO in mvneta and mv643xx_eth drivers.  From Ezequiel Garcia.

 8) Support software TSO in fec driver too, from Nimrod Andy.

 9) Add Broadcom SYSTEMPORT driver, from Florian Fainelli.

10) Handle broadcasts more gracefully over macvlan when there are large
    numbers of interfaces configured, from Herbert Xu.

11) Allow more control over fwmark used for non-socket based responses,
    from Lorenzo Colitti.

12) Do TCP congestion window limiting based upon measurements, from Neal
    Cardwell.

13) Support busy polling in SCTP, from Neal Horman.

14) Allow RSS key to be configured via ethtool, from Venkata Duvvuru.

15) Bridge promisc mode handling improvements from Vlad Yasevich.

16) Don't use inetpeer entries to implement ID generation any more, it
    performs poorly, from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1522 commits)
  rtnetlink: fix userspace API breakage for iproute2 < v3.9.0
  tcp: fixing TLP's FIN recovery
  net: fec: Add software TSO support
  net: fec: Add Scatter/gather support
  net: fec: Increase buffer descriptor entry number
  net: fec: Factorize feature setting
  net: fec: Enable IP header hardware checksum
  net: fec: Factorize the .xmit transmit function
  bridge: fix compile error when compiling without IPv6 support
  bridge: fix smatch warning / potential null pointer dereference
  via-rhine: fix full-duplex with autoneg disable
  bnx2x: Enlarge the dorq threshold for VFs
  bnx2x: Check for UNDI in uncommon branch
  bnx2x: Fix 1G-baseT link
  bnx2x: Fix link for KR with swapped polarity lane
  sctp: Fix sk_ack_backlog wrap-around problem
  net/core: Add VF link state control policy
  net/fsl: xgmac_mdio is dependent on OF_MDIO
  net/fsl: Make xgmac_mdio read error message useful
  net_sched: drr: warn when qdisc is not work conserving
  ...
2014-06-12 14:27:40 -07:00
Arnd Bergmann 5d01b7684b mmc: simplify SDHCI Kconfig dependencies
We have a number of front-end drivers for SDHCI_PLTFM, some of them
use 'select MMC_SDHCI_PLTFM', others use 'depends on'. This is
inconsistent and confusing, and in one case has also led to a
build error because of incomplete dependencies:

warning: (MMC_SDHCI_PXAV3 && MMC_SDHCI_PXAV2 && MMC_SDHCI_BCM_KONA) selects MMC_SDHCI_PLTFM which has unmet direct dependencies (MMC && MMC_SDHCI)
drivers/built-in.o: In function `sdhci_sirf_resume':
:(.text+0xaaacb4): undefined reference to `sdhci_resume_host'
drivers/built-in.o: In function `sdhci_sirf_suspend':
:(.text+0xaaacf8): undefined reference to `sdhci_suspend_host'
drivers/built-in.o: In function `sdhci_sirf_probe':
:(.text+0xaaaf44): undefined reference to `sdhci_add_host'
:(.text+0xaaaf50): undefined reference to `sdhci_remove_host'

This changes Kconfig to use 'depends on MMC_SDHCI_PLTFM' for all these
cases, to fix the build error and make the logic more logical.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-06-12 10:51:14 +02:00
Arnd Bergmann 60a549fcda mmc: omap: don't select TPS65010
The MMC host driver should not select the pmic driver, since that
may have other dependencies, notably i2c in this case. It's not
clear what the exact requirement of the driver is, but to preserve
the behavior, this patch changes the 'select' into 'depends on',
meaning you now have to turn on TPS65010 explicitly and then
MMC_OMAP.

Found during randconfig build testing.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: linux-omap@vger.kernel.org
Cc: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-06-12 10:51:01 +02:00
Arnd Bergmann d7fe833f3f mmc: mvsdio: avoid compiler warning
gcc correctly points out that hw_state can be used uninitially
in the mvsd_setup_data() function. This rearranges the function
to ensure it always contains a proper value.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Nicolas Pitre <nico@fluxnic.net>
Cc: Chris Ball <chris@printf.net>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: linux-mmc@vger.kernel.org
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-06-12 10:50:27 +02:00
Arnd Bergmann bf614c7a21 mmc: atmel-mci: incude asm/cacheclush.h
This avoids a build error due to the use of flush_dcache_page.

drivers/mmc/host/atmel-mci.c: In function 'atmci_read_data_pio':
drivers/mmc/host/atmel-mci.c:1870:5: error: implicit declaration of function 'flush_dcache_page' [-Werror=implicit-function-declaration]
     flush_dcache_page(sg_page(sg));
     ^

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-06-12 10:50:14 +02:00
Stephen Boyd ed1761d7d8 mmc: sdhci-msm: Fix fallout from sdhci refactoring
The sdhci core was refactored recently and some of those
refactorings required changes in every sdhci platform driver.
Those updates happened around the same time as when the msm
driver was merged so the refactorings missed the msm driver.
Hook in the basic library functions so that we can boot apq8074
dragonboards again instead of crashing when we try to jump to
NULL function pointers.

Reported-by: Kevin Hilman <khilman@linaro.org>
Cc: Georgi Djakov <gdjakov@mm-sol.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Kumar Gala <galak@codeaurora.org>
Reviewed-by: Georgi Djakov <gdjakov@mm-sol.com>
Tested-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-06-12 10:40:27 +02:00
Guennadi Liakhovetski 13fe0ec37a mmc: usdhi6rol0: fix compiler warnings
Fix a number of wrong print formats.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-06-12 10:38:50 +02:00
Linus Torvalds 07888238f5 MMC highlights for 3.16:
Core:
  - support HS400 mode of eMMC 5.0, via DT bindings mmc-hs400-1_{2,8}v
  - if card init at 3.3v doesn't work, try 1.8v and 1.2v too
 
 Drivers:
  - moxart: New driver for MOXA ART SoCs
  - rtsx_usb_sdmmc: New driver for Realtek USB card readers
  - sdhci: Large rework around IRQ/regulator handling, remove card_tasklet
  - sdhci-pci-o2micro: Add SeaBird SeaEagle SD3 support
  - sunxi: New driver for Allwinner sunxi SoCs
  - usdhi6rol0: New driver for Renesas SD/SDIO controller
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJTl199AAoJEHNBYZ7TNxYMutUQAIHOkbFeEmHiwhhM5snpywAg
 wRLIdiOWTYGrqRzvINDGsH4MVpt+acK5QuS5rNO5sEqhSovAZCNbQAvI4wXP60Uy
 bnXyqnq7uPHjQxUWu9ES1l3gvX1djLVCD0f5sqyG1nL4SA3h8CFbEKkGHEMEXpWY
 tOwUGxrM6IHk1Z7l1FzWiN4nidvsX9maKDiCEyCF86xMEyqsxd/gz5pjhF3GgZBY
 z174+XU7Vlb5HkpeH/anhSVfYALURlRNNdtJaMQoR1Goldhr/KfnaqkuQNLanqOS
 R1BselxeZxFUcSGJ87WrLE7jFa9i9qUzMdxJRrzssNCA7JZl1hOwTE4EAFCxMADZ
 fbZl/kwoQo/nO6HHQtJ3J+UeinA9aFGUR0jpN8l9jZkwb9VsyYenrd27+OcUcJGP
 ZyQ636oT+mB44RwHBz2mZVLLTrV84x9d4VVqjZ3QrMYNWVhXyIyjFSinoJvcNGOk
 xQ4zsAsyPXHzr6pR6diKab8tLYC+VoeWKdmqPDQtPY+L+D23qQNAarvS1oPjsgx8
 IZIIdh4ikftsXALriU2OqVi3zIw+mVTDlq7xp3gSI/Zf4Srlx+6V0X7KVUVoMB0h
 O19+HgKJv6pCoL54+FgFDdKcgdUANWG2s/BSmhRNgFJY97/tvahHlyoTmrVhXqil
 L/nmuknP3lB4RTQ7E5Kk
 =OZao
 -----END PGP SIGNATURE-----

Merge tag 'mmc-updates-for-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc

Pull MMC update from Chris Ball:
 "MMC highlights for 3.16:

  Core:
   - support HS400 mode of eMMC 5.0, via DT bindings mmc-hs400-1_{2,8}v
   - if card init at 3.3v doesn't work, try 1.8v and 1.2v too

  Drivers:
   - moxart: New driver for MOXA ART SoCs
   - rtsx_usb_sdmmc: New driver for Realtek USB card readers
   - sdhci: Large rework around IRQ/regulator handling, remove card_tasklet
   - sdhci-pci-o2micro: Add SeaBird SeaEagle SD3 support
   - sunxi: New driver for Allwinner sunxi SoCs
   - usdhi6rol0: New driver for Renesas SD/SDIO controller"

* tag 'mmc-updates-for-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (95 commits)
  mmc: sdhci-s3c: use mmc_of_parse and remove the card_tasklet
  mmc: add a driver for the Renesas usdhi6rol0 SD/SDIO host controller
  mmc: sdhci-of-esdhc: Fixup compile error
  mmc: tegra: fix reporting of base clock frequency
  mmc: tegra: disable UHS modes
  mmc: sdhci-dove: use mmc_of_parse() and remove card_tasklet CD handler
  MAINTAINERS: mmc: Add path to git tree
  mmc: dove: fix missing MACH_DOVE dependency
  mmc: sdhci: SD tuning is broken for some controllers
  mmc: sdhci-esdhc-imx: fix mmc ddr mode regression issue
  mmc: sdhci-pci-o2micro: Add SeaBird SeaEagle SD3 support
  mmc: omap_hsmmc: split omap-dma header file
  mmc: omap_hsmmc: fix cmd23 multiblock read/write
  mmc: omap_hsmmc: use devm_ioremap_resource
  mmc: omap_hsmmc: use devm_request_threaded_irq
  mmc: omap_hsmmc: use devm_request_irq
  mmc: omap_hsmmc: use devm_clk_get
  mmc: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs
  mmc: wmt-sdmmc: Use GFP_KERNEL instead of hard-coded value
  mmc: omap: Use DIV_ROUND_UP instead of open coded
  ...
2014-06-10 14:35:22 -07:00
Linus Torvalds 1a5700bc2d The clock framework changes for 3.16 are pretty typical: mostly clock
driver additions and fixes. There are additions to the clock core code
 for some of the basic types (e.g. the common divider type has some fixes
 and featured added to it).
 
 One minor annoyance is a last-minute dependency that wasn't handled
 quite right. ba0fae3 in this pull request depends on
 include/dt-bindings/clock/berlin2.h, which is already in your tree via
 the arm-soc pull request. Building for the berlin platform will break
 when the clk tree is built on it's own, but merged into your master
 branch everything should be fine.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJTkhd7AAoJEDqPOy9afJhJ/kAQAKJt4slFYNW5t69HBmqlfkxR
 1Y61KqTaZiJ2XNqudNUDd6GkD5CW0pqD194dOXOLQMSGIZ3i+mHJ91ddV4x7J8xe
 +eAvaHqDc4XJyJouzOOxx2LhnThRUkpyXLzbXTITIoy4nK6K+ANg6hPjfBwTDs3m
 7dDu+WDYAN4EMjMffpPD26axl778H5FXzqJaKx+RmMDw6f3y6g+8hKCvSicetpAa
 AnTLhx8q4kbEmOZHOEny28KliOpDAMPd/nNcnjqpfKBSoq0J6aYGM0t5bUH+clY9
 nzjgMfE+pRm8N+oyssNCqT99ebeIxSF6Ps/EVZRJCETUi3s0n1/Y4dK3uPNOyo+G
 BSv0wfQ5M1IebmnIIlQuJ+zNvtKFkoLoi1Q/fsOr51HVfddwrEbd972+zYdjSeVe
 RXRb3HAStfQEjp0874VD9wr6u0tHskUrQGzHSSs8PNsfCv/URwJUPuS7XnePPXAZ
 KdtJST/b+WiY96pPJDLc44trRko1opxgncYqsusnWtwsUzK5aKnAbbYSiTIZhxJU
 44p7/xOokeTcgDuluEk8mR+PEX5EhGokYXOVXfSCMJOXehpHnpMHtzCieTcmJ9Ir
 NaOATHjSXwHI7jiv/W+EZQnZCnoHnST+GT4FtmjYkD3lzMpK9d/E9mxjKs8hUNgO
 xH71k4uL7WljxsVWp/16
 =2AAL
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus-3.16' of git://git.linaro.org/people/mike.turquette/linux into next

Pull clock framework updates from Mike Turquette:
 "The clock framework changes for 3.16 are pretty typical: mostly clock
  driver additions and fixes.  There are additions to the clock core
  code for some of the basic types (e.g. the common divider type has
  some fixes and featured added to it).

  One minor annoyance is a last-minute dependency that wasn't handled
  quite right.  Commit ba0fae3b06 ("clk: berlin: add core clock driver
  for BG2/BG2CD") in this pull request depends on
  include/dt-bindings/clock/berlin2.h, which is already in your tree via
  the arm-soc pull request.  Building for the berlin platform will break
  when the clk tree is built on it's own, but merged into your master
  branch everything should be fine"

* tag 'clk-for-linus-3.16' of git://git.linaro.org/people/mike.turquette/linux: (75 commits)
  mmc: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs
  clk: export __clk_round_rate for providers
  clk: versatile: free icst on error return
  clk: qcom: Return error pointers for unimplemented clocks
  clk: qcom: Support msm8974pro global clock control hardware
  clk: qcom: Properly support display clocks on msm8974
  clk: qcom: Support display RCG clocks
  clk: qcom: Return highest rate when round_rate() exceeds plan
  clk: qcom: Fix mmcc-8974's PLL configurations
  clk: qcom: Fix clk_rcg2_is_enabled() check
  clk: berlin: add core clock driver for BG2Q
  clk: berlin: add core clock driver for BG2/BG2CD
  clk: berlin: add driver for BG2x complex divider cells
  clk: berlin: add driver for BG2x simple PLLs
  clk: berlin: add driver for BG2x audio/video PLL
  clk: st: Terminate of match table
  clk/exynos4: Fix compilation warning
  ARM: shmobile: r8a7779: Add clock index macros for DT sources
  clk: divider: Fix overflow in clk_divider_bestdiv
  clk: u300: Terminate of match table
  ...
2014-06-07 20:27:30 -07:00
Linus Torvalds 1fe9eb1847 Changes to existing drivers:
- Increase DT coverage - arizona, mc13xxx, stmpe-i2c, syscon, sun6i-prcm
  - Regmap use of and/or clean-up - tps65090, twl6040
  - Basic renaming - max14577
  - Use new cpufreq helpers -  db8500-prcmu
  - Increase regulator support - stmpe, arizona, wm5102
  - Reduce legacy GPIO overhead - stmpe
  - Provide necessary remove path - bcm590xx
  - Expand sysfs presence - kempld
  - Move driver specific code out to drivers - rtc-s5m, arizona
  - Clk handling - twl6040
  - Use managed (devm_*) resources - ipaq-micro
  - Clean-up/remove unused/duplicated code - tps65218, sec, pm8921, abx500-core
    		   		     	    db8500-prcmu, menelaus
  - Build/boot/sematic bug fixes - rtsx_usb, stmpe, bcm590xx, abx500, mc13xxx
                                   rdc321x-southbridge, mfd-core, sec, max14577
 				  syscon, cros_ec_spi
  - Constify stuff 		- sm501, tps65910, tps6507x, tps6586x, max77686,
    	    	  		  max8997, kempld, max77693, max8907, rtsx_usb
 				  db8500-prcmu, max8998, wm8400, sec, lp3943,
 				  max14577, as3711, omap-usb-host, ipaq-micro
 Support for new devices:
  - Add support for max77836 into max14577
  - Add support for tps658640 into tps6586x
  - Add support for cros-ec-i2c-tunnel into cros_ec
  - Add new driver for rtsx_usb_sdmmc and rtsx_usb_ms
  - Add new driver for axp20x
  - Add new driver for sun6i-prcm
  - Add new driver for ipaq-micro
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJTkEAyAAoJEFGvii+H/HdhYdMP/j0MCmbORM9mr84Uuhi0PfBZ
 yE1zlhLQHtqQEcp4Ih6vWxIbgdhyHy3CqIiCKkhSTH0TWfreBX7DmlSc1QAKazpy
 sXeD/pB5TSIIfAHVh4NXF51WMzZ8OvQrmJQwdjUY1Sal2tlDCUdc84qtnn+3/J9N
 JIKpf4E1IeWojE8F3koKBcyE6ZzkAthIzWNDU9/y+sIZZEqPVRu9Y3mpdhPo6P3I
 9TboZ/s2cAwad56iArFMOCvtg1xpn0WyS0HgAxpSa9X5qLRjYPX5GnBBz8zKJYm3
 xHCiD6SgN29xX9W+MkcvtgEghhMfOkPgwF69u2/eagbtNEOm50cyLrvAe+SKjRvE
 pODs5yvHJap29cbVafHSdzV+zLZ51J/Oi/TFsG8/VBbd4DyW7oSM4juT20TFSiNt
 Edwzd4gicg/NxA7TupFCRQLgwAa3fnpPeCtsIims7LU7SclPuwNgS31isOGAkOvd
 mMaBa1clZb50Dy2iL8m1ugyqdOZXs9S24j3u+B0TTJyabMbNhDTGUwBG4/PrlJHq
 fIysx6CdNUGLikG2PybFvhCf3+FkEoPPtkloM1sblkhPHVunVlhXPRYAE90W2jUA
 dDQ2Aco/idWSGRZ5t7kA8OBN3+PwiIpxTt/D4eDmS7Qe/v3KXvhUYuKl2mD5+IfC
 StFiP5cd3zyJvWTeexuW
 =GYTU
 -----END PGP SIGNATURE-----

Merge tag 'mfd-for-linus-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next

Pull MFD updates from Lee Jones:
 "Changes to existing drivers:
   - increase DT coverage: arizona, mc13xxx, stmpe-i2c, syscon,
     sun6i-prcm
   - regmap use of and/or clean-up: tps65090, twl6040
   - basic renaming: max14577
   - use new cpufreq helpers: db8500-prcmu
   - increase regulator support: stmpe, arizona, wm5102
   - reduce legacy GPIO overhead: stmpe
   - provide necessary remove path: bcm590xx
   - expand sysfs presence: kempld
   - move driver specific code out to drivers: rtc-s5m, arizona
   - clk handling: twl6040
   - use managed (devm_*) resources: ipaq-micro
   - clean-up/remove unused/duplicated code: tps65218, sec, pm8921,
     abx500-core, db8500-prcmu, menelaus
   - build/boot/sematic bug fixes: rtsx_usb, stmpe, bcm590xx, abx500,
     mc13xxx, rdc321x-southbridge, mfd-core, sec, max14577, syscon,
     cros_ec_spi
   - constify stuff: sm501, tps65910, tps6507x, tps6586x, max77686,
     max8997, kempld, max77693, max8907, rtsx_usb, db8500-prcmu,
     max8998, wm8400, sec, lp3943, max14577, as3711, omap-usb-host,
     ipaq-micro

  Support for new devices:
   - add support for max77836 into max14577
   - add support for tps658640 into tps6586x
   - add support for cros-ec-i2c-tunnel into cros_ec
   - add new driver for rtsx_usb_sdmmc and rtsx_usb_ms
   - add new driver for axp20x
   - add new driver for sun6i-prcm
   - add new driver for ipaq-micro"

* tag 'mfd-for-linus-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (77 commits)
  mfd: wm5102: Correct default for LDO Control 2 register
  mfd: menelaus: Use module_i2c_driver
  mfd: tps65218: Terminate of match table
  mfd: db8500-prcmu: Remove check for CONFIG_DBX500_PRCMU_DEBUG
  mfd: ti-keystone-devctrl: Add bindings for device state control
  mfd: palmas: Format the header file
  mfd: abx500-core: Remove unused function abx500_dump_all_banks()
  mfd: arizona: Correct addresses of always-on trigger registers
  mfd: max14577: Cast to architecture agnostic data type
  i2c: ChromeOS EC tunnel driver
  mfd: cros_ec: Sync to the latest cros_ec_commands.h from EC sources
  mfd: cros_ec: spi: Increase cros_ec_spi deadline from 5ms to 100ms
  mfd: cros_ec: spi: Make the cros_ec_spi timeout more reliable
  mfd: cros_ec: spi: Add mutex to cros_ec_spi
  mfd: cros_ec: spi: Calculate delay between transfers correctly
  mfd: arizona: Correct error message for addition of main IRQ chip
  mfd: wm8997: Add registers for high power mode
  mfd: arizona: Add MICVDD to mapped regulators
  mfd: ipaq-micro: Make mfd_cell array const
  mfd: ipaq-micro: Use devm_ioremap_resource()
  ...
2014-06-06 12:08:39 -07:00
Jaehoon Chung 11bc9381b2 mmc: sdhci-s3c: use mmc_of_parse and remove the card_tasklet
Fix the compile error.
(Removed the card_tasklet at "mmc: sdhci: push card_tasklet into treaded irq handler")

drivers/mmc/host/sdhci-s3c.c: In function ‘sdhci_s3c_notify_change’:
drivers/mmc/host/sdhci-s3c.c:402:25: error: ‘struct sdhci_host’ has no member named ‘card_tasklet’

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>
2014-06-04 18:59:12 -04:00
David Lanzendörfer 3cbcb16095 mmc: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs
The Allwinner sunxi mmc host uses dma in bus-master mode using a built-in
designware idmac controller, which is identical to the one found in the mmc-dw
hosts. However the rest of the host is not identical to mmc-dw, it deals with
sending stop commands in hardware which makes it significantly different
from the mmc-dw devices.

Signed-off-by: David Lanzendörfer <david.lanzendoerfer@o2s.ch>
[hdegoede@redhat.com: various cleanups and fixes]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Chris Ball <chris@printf.net>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-06-03 16:52:34 -07:00
Lee Jones 28fee3fa0e Immutable branch between MFD and Extcon due for v3.16 merge-window.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJTV7vmAAoJEFGvii+H/HdhStcQAIPXONkcTtnRijYYVo4+zMfY
 5lyEc7bpboK3FJW0SrSM3gt6jSjFayz7HN+oVd5ez73XYlKr+X4oap6GD1VnP+r2
 d2kc0ccfRa5oMPdeth0xabwmXnG2Cm3i3EwLGZAjxRAI72nmmTJu08HSWYSw9tBs
 oxKLuuYNhdIRAoEHrA5wyymb4fq2AdQrdNGEXZ9utZEK7z0+DRxD3LxeNEiW8dU2
 pU9XXlEbp9gQKsyiRL+MPxuFH7C7QpaQN1aryKupHEHtuRPjxqIsXETUsmxGt+sQ
 P3jN3FayYRYknqWSda+/lgEjkzw0CgeLFpR13emt5P2K8K8NPcV17mHhggWxFaes
 iGPi9cgotV9X2zxAgayAusunPRHEQ8Yz7bnQsXBuH04CbBgnu53gBUQyELQhJ2xO
 HBG6VVn5kXCpb80OWX/lTefEIN3yfuH15eV/cmBk3Qu6qqVFjCg6cBqi2b5QFPYN
 8ks/58ewbhKqh+T+yr7N70sXIfOF9aBIqREdnlp/uXaCYLkylSNaUPpxZTllDUnE
 QoJVTMwb/BgGKolhpfwva2UkVPt5C50w1+mNLh05d9IMF/C9kyQMcsC7rOa229LU
 XwtDoWFUTMzjNqTRBTLdElfkEnEET07xDvv3SQTAj30eTCaQs0+gxDMNSrDN/0zN
 u6uUTp1grfVVOoz1FPcS
 =q4Ul
 -----END PGP SIGNATURE-----
mergetag object a613b739b8
 type commit
 tag ib-mfd-omap-3.16
 tagger Lee Jones <lee.jones@linaro.org> 1398263769 +0100
 
 Immutable branch between MFD and ARM OMAP due for v3.16 merge-window.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJTV9ADAAoJEFGvii+H/HdhPhkP/1Xoc6APceeJaX8jOmx0rxzQ
 PhYl3er5b3eYtxgGR8s8FrdVrYNyEytGZtMoQN3EYhVnq/ZvbPkR8zMruDszUHYP
 PBfcZJi4GBJIAQU30a8Dvla8UtFaph+IoxSd6E4hSIvb+UFjSvi9ZjQYX82gFop4
 TLeAPW4byQP2YKSkDUq5WzzMLbjQ+ZanJSrueYXmu4VOVgtA0+nBWVj5B8PD1m+O
 2Sp2vhdCPCgIsChQZl3i9h2HroUtomnNWeCdv0YzOwISlvUv+aBg7khK35Jtw7v3
 YeAx3YelQ3z2dnFS/ddEvLKthuTV5BfyGq+dJjMwBLrOv81rzHFBYLCRiABB0RgD
 EUEAv3IJ31SpjrsO0uXnGFp69gMsJgOwLRcjM8TfUi+Wd4YQcbl/tCYX2k7voJ6u
 fbpqarr1zgZpV7r1cX2ivsm8VY2bzQ7p2Dh681oQtHyM+RC94dVvGS0cAaVlnhYY
 MtJWEdtpY3hRcx5qVE8+8wf5RYyXjluhme1EGhO8VL13hMw7ofmtfl2OKN4WAsYO
 KIDMTVJ9RneUQQ6FOx270x17Gp01vxoHIV6pBMi7Uo65l7xrs2YEfgUJhp4eCVXT
 dD4appF5q090UwD7lYADztQZ8RB5GLELZH6Vkpw3qPtfqM97zSy9IFMzTxn446ic
 vdktkG6GJab2vg3mLxDf
 =izRQ
 -----END PGP SIGNATURE-----
mergetag object c42ba72ec3
 type commit
 tag ib-mfd-regulator-3.16
 tagger Lee Jones <lee.jones@linaro.org> 1398675220 +0100
 
 Immutable branch between MFD and Regulator due for v3.16 merge-window.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJTXhcuAAoJEFGvii+H/HdhoJEQAI15rEldcSpzLCYiinEfiKUI
 d+6zn5Gx6pKtkfCWdplHxM82Fe5H/kbgCLq+SSCQ6DFrOGXC34i4JnmhdCvcaU/K
 OEtXsG1i2PNzJwMFcnXVW5wD6LnS/b+243XtBtfQ887j9A1R2tEM9ka+i5AP3+O2
 NoBT9DshWWnj16CRJbMMFgNqDI6+QUoirgKzOXLp9stuzrThYU7kaluyMmMUREAx
 tXl8jOBH2Nu0YBiVi6Cgn1xNqtX0Snc9UU1QcugJzuPtyseFsQGUp1cP/ahmeP0y
 EFzKoDbKpag1BV/IEsKWfiD6KEEPFd3IUcZugXIhlRKSGsEcIRTeu6PBFMq9FssF
 hfajzbTw7aDFmYq3Ifc4V6MGtalnCoJz0bsM5XA1voWqXJ+9Tqp4p/5xbJVn2ObA
 /e8k5ljeRH+PBuRKrxgmJJUP3n/QXlJMZ+IrI3BTSeMLu2xZ1U95ynbHO8s3Dxdd
 CpX4xbDq82cBn+JNG3K9+l8XTZUdaWwEQ18VylVcbBdEa4jS2lMyYKIFCJiERLNt
 LCD6hzMGjF7/qVeXhi9AyITEe1XrFSjeTv8WH2R3C4vVXLcjQ3bCnWTFlszbGBsK
 /H0dUWg0HofMrR/oATydWtrgj5F+1aEIdZZqDU0hUCvC849c62zprqXUe7TbP6FT
 yvAlikr5PGMIWw89DCn1
 =NGmT
 -----END PGP SIGNATURE-----

Merge branches 'ib-from-asoc-3.16', 'ib-from-pm-3.16', 'ib-from-regulator-3.16', 'ib-mfd-gpio-3.16' and 'ib-mfd-mmc-memstick-3.16', tags 'ib-mfd-extcon-3.16', 'ib-mfd-omap-3.16' and 'ib-mfd-regulator-3.16' into ibs-for-mfd-merged
2014-06-03 08:08:40 +01:00
Guennadi Liakhovetski 75fa9ea6e3 mmc: add a driver for the Renesas usdhi6rol0 SD/SDIO host controller
This patch adds a driver for the Renesas usdhi6rol0 SD/SDIO host controller
in both PIO and DMA modes.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Signed-off-by: Chris Ball <chris@printf.net>
2014-06-02 21:24:45 -04:00
Linus Torvalds 6c52486ded Updates for mmci driver:
- Put the device into low power state at system suspend.
  - Convert to the common mmc DT parser.
  - Add missing DT bindings needed for ux500.
 
 Updates for ARM ux500|u300:
  - Convert to the common mmc DT bindings.
  - Remove redundant board file for mmci platform data.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJTjF3hAAoJEP4mhCVzWIwpXh0QAIbK0n+m4GKOo+MoMeuMzCkr
 3Go1mh75/JpkLQiKyWthfKInkVJ5VFMBY9ZgqcP5nfzy/NY8BYk3UTvWFQkANp5Y
 telmC6uhkzw1b2wxdgytZFdJ9e7LJovJRERhzx3N5xDxuqM8gm/IZECvn8MbaFp8
 3lpPgjh42yS28XDdr3zF2e9nAUH/PUDmOwoxa5jrqxZF63KVfe4dhXlhFHZsrpBq
 y96IOH2te3TyfJ3+RuE53uf4qMSSlNaoG+8LO40k8LG5hHs391sh05s03xoiZVNB
 LvFbr8icF8jvu6Kbag/v1i3Lrcl1/xLxFr0KNbDoY3n0UvizViHs1v6hKl1ZV0kR
 J0z4+6tP41oKSnXz70HE4hJK10gtI4h5KZiBnrPXdTmNet5pSpclJ9UtB69ZPmZS
 pmm90p89gDgTzKhjvdnAM1qBeRjWm4BBI6KPwVxqNfL3U5gt5p6RR01JAqn6r48I
 AUoDPLJJxOP/YoPQja2VmyHA+dJ1/ax0xB5hQ8K2MEoegi52eYAFk2nl+PgvFdMv
 3kcoxqwBtnoUwEuZqpD3Wk9WTBbErexpUxUw3Wd+x3t38sv5FKLdelCt++I3qEZb
 5XaUIdppslez/i05BMWPKBdkn3fhWEhlJ7w3aZboczy8c+VbOOjIBIvNROuAIRee
 R+i5hz/AxYz+wT4PBMnv
 =09ec
 -----END PGP SIGNATURE-----

Merge tag 'mmc-v3.16-1' of git://git.linaro.org/people/ulf.hansson/mmc into next

Pull MMC update from Ulf Hansson:
 "These patches are mainly updates for the mmci driver and have been
  tested in linux-next.

  Some ARM SoC related patches are also included and those have been
  acked from the corresponding maintainers to go through my mmc tree.

  Updates for mmci driver:
   - Put the device into low power state at system suspend.
   - Convert to the common mmc DT parser.
   - Add missing DT bindings needed for ux500.

  Updates for ARM ux500|u300:
   - Convert to the common mmc DT bindings.
   - Remove redundant board file for mmci platform data"

* tag 'mmc-v3.16-1' of git://git.linaro.org/people/ulf.hansson/mmc: (22 commits)
  mmc: mmci: Enforce DMA configuration through DT
  mmc: mmci: Enforce max frequency configuration through DT
  mmc: mmci: Enforce mmc capabilities through DT
  mmc: mmci: Enforce DT for signal direction and feedback clock
  ARM: ux500: Remove redundant board file for mmci platform data
  ARM: ux500: Add a vmmc regulator through DT for the poped eMMC for href
  ARM: ux500: Add the mmc capabilities flags to DT
  mmc: mmci: Enable MMC_CAP_CMD23
  mmc: mmci: Mark the DT bindings for highspeed mode as deprecated
  ARM: u300: Convert to the common mmc DT bindings for highspeed mode
  ARM: nomadik: Convert to the common mmc DT bindings for highspeed mode
  ARM: ux500: Convert to the common mmc DT bindings for highspeed mode
  ARM: ux500: Add mmci signal directions and feeback clock in DT for href
  mmc: mmci: Use the common mmc DT parser
  mmc: mmci: Add DT bindings for feedback clock pin
  mmc: mmci: Add DT bindings for signal direction
  mmc: mmci: Update DT documentation
  mmc: mmci: Convert to devm functions
  mmc: mmci: Convert to the mmc gpio API
  mmc: mmci: Put the device into low power state at system suspend
  ...
2014-06-02 09:22:24 -07:00
Ulf Hansson 8c3a05b489 mmc: mmci: Enforce DMA configuration through DT
Remove the option to provide DMA configuration as platform data,
enforce it through DT.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Roland Stigge <stigge@antcom.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-06-02 11:20:25 +02:00
John W. Linville 9db7cb6901 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem 2014-05-27 13:51:31 -04:00
Ulf Hansson 06732b84b4 mmc: sdhci-of-esdhc: Fixup compile error
The commit below introduced compile errors, let's fix them.
mmc: sdhci-of-esdhc: remove platform_suspend/platform_resume callbacks

Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>
2014-05-23 09:16:53 -04:00
Andrew Bresticker f92603552d mmc: tegra: fix reporting of base clock frequency
Tegra SDHCI controllers, by default, report a base clock frequency of
208Mhz in SDHCI_CAPABILTIES which may or may not be equal to the actual
base clock frequency.  This is because the clock rate is configured by
the clock controller, which is external to the SD/MMC controller.  Since
the SD/MMC controller has no knowledge of how this clock is configured,
it will simply report the maximum frequency.  While the reported value
can be overridden by setting BASE_CLK_FREQ in VENDOR_CLOCK_CTRL on
Tegra30 and later SoCs, just set CAP_CLOCK_BASE_BROKEN and supply
sdhci_pltfm_clk_get_max_clock(), which simply does a clk_get_rate(),
as the get_max_clock() callback.

Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Tested-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>
2014-05-23 08:49:29 -04:00
Andrew Bresticker 3145351a6f mmc: tegra: disable UHS modes
Program TEGRA_SDHCI_VENDOR_MISC_CTRL so that UHS modes aren't advertised
in SDHCI_CAPABILITIES_1.  While the Tegra SDHCI controller does support
these modes, they require Tegra-specific tuning and calibration routines
which the driver does not support yet.

Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Tested-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>
2014-05-23 08:48:55 -04:00
Sebastian Hesselbarth c5ee249069 mmc: sdhci-dove: use mmc_of_parse() and remove card_tasklet CD handler
f8ec589b86 ("mmc: sdhci-dove: allow GPIOs to be used for card detection
on Dove" added a gpio based card detect interrupt handler that was hooked
up into card_tasket.

3560db8e24 ("mmc: sdhci: push card_tasklet into threaded irq handler")
now removed that very card_tasklet causing sdhci-dove to fail on build
with:
drivers/mmc/host/sdhci-dove.c: In function 'sdhci_dove_carddetect_irq':
drivers/mmc/host/sdhci-dove.c:42:24: error: 'struct sdhci_host' has no member named 'card_tasklet'

To fix both the build error and get a working gpio card detection without
card_tasklet, replace sdhci_get_of_property() with more recent
mmc_of_parse(). It takes care of gpio-based card detect passed through DT
already and allows to remove the offending code sections dealing with
removed card_tasklet.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>
2014-05-23 08:42:02 -04:00
Sebastian Hesselbarth ec4422aca3 mmc: dove: fix missing MACH_DOVE dependency
DT-enabled Dove moved over from ARCH_DOVE in mach-dove to MACH_DOVE in
mach-mvebu. As non-DT ARCH_DOVE will stay to rot for a while, add a new
DT-only MACH_DOVE Kconfig. This slipped through the cracks and now is
a fix to allow to build Dove's SDHCI driver for mach-mvebu on v3.15-rc.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22 08:40:46 -04:00
Al Cooper 7ce45e9506 mmc: sdhci: SD tuning is broken for some controllers
The SD Host Controller spec states that the SD Host Controller can
request that the driver send up to 40 CMD19's while doing tuning
and that the total time the card spends responding must be < 150ms.
The sdhci_execute_tuning() function in sdhci.c that loops through
sending the CMD19's has multiple bugs. First it sets a "timeout"
variable to 150 and a loop counter variable to 40. It then decrements
both variables by 1 at the end of each loop. It tries to handle
violations of the count and time by doing a break when BOTH variables
are equal to zero, which can never happen because they we set to
different values and decremented by 1 at the same time. The timeout
variable is not based on time at all and is totally useless.
The routine also considers a loop counter of zero to be an error
which means that any controller that requests the max of 40 CMD19s
will cause tuning to fail and be disabled.

I've fixed these issues by allowing up to 40 CMD19's and I've removed
any attempt to handle the 150ms time limit. Removing timeout checking
seems safe here because each CMD19 is timeout protected and the max
loop counters insures we don't loop forever. Adding timeout checking
would not be as simple as snapping the time at the loop start and
checking for 150ms to pass because the loop queues the CMD19's and
uses events to wait for completion so the time would include
all the normal scheduler latencies.

Signed-off-by: Al Cooper <alcooperx@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22 08:40:46 -04:00
Aisheng Dong 69f5bf38f9 mmc: sdhci-esdhc-imx: fix mmc ddr mode regression issue
It's caused by the platform driver was still using MMC_TIMING_UHS_DDR50
for MMC DDR mode which needs update too.

Reported-by: Fabio Estevam <fabio.estevam@freescale.com>
Reported-by: Shawn Guo <shawn.guo@freescale.com>
Signed-off-by: Dong Aisheng <b29396@freescale.com>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
[Ulf Hansson] Resolved conflict
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22 08:40:45 -04:00
Peter Guo 706adf6bc3 mmc: sdhci-pci-o2micro: Add SeaBird SeaEagle SD3 support
Add O2Micro/BayHubTech chip 8520 subversion B1 SD3.0 support.
Add O2Micro/BayHubTech chip 8620 and 8621 SD3.0 support
Enable Led function of 8520 chip.

Signed-off-by: Peter Guo <peter.guo@bayhubtech.com>
Signed-off-by: Adam Lee <adam.lee@canonical.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22 08:40:44 -04:00
Balaji T K ee526d515a mmc: omap_hsmmc: split omap-dma header file
moving dmaengine consumer specific function to omap-dmaengine.h
to Resolve build failure seen with sh-allmodconfig:
    include/linux/omap-dma.h:171:8: error: expected identifier before numeric constant
    make[4]: *** [drivers/mmc/host/omap_hsmmc.o] Error 1

Cc: Russell King - ARM Linux <linux@arm.linux.org.uk>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Balaji T K <balajitk@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22 08:40:44 -04:00
Balaji T K 2177fa9482 mmc: omap_hsmmc: fix cmd23 multiblock read/write
Check for set block count command fails always since host->cmd is set
to NULL in the same function incorrectly. Correct host->cmd usage properly.

Signed-off-by: Balaji T K <balajitk@ti.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22 08:40:43 -04:00
Balaji T K 77fae21987 mmc: omap_hsmmc: use devm_ioremap_resource
With devm_ioremap_resource conversion release_mem_region, iounmap can be
removed in clean up path

Signed-off-by: Balaji T K <balajitk@ti.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22 08:40:43 -04:00
Balaji T K 9fa0e05e06 mmc: omap_hsmmc: use devm_request_threaded_irq
With devm_request_threaded_irq conversion free_irq can be removed
in clean up path

Signed-off-by: Balaji T K <balajitk@ti.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22 08:40:42 -04:00
Balaji T K e1538ed7db mmc: omap_hsmmc: use devm_request_irq
With devm_request_irq conversion free_irq can be removed in clean up path

Signed-off-by: Balaji T K <balajitk@ti.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22 08:40:41 -04:00
Balaji T K 9618195e5a mmc: omap_hsmmc: use devm_clk_get
With devm_clk_get conversion clk_put can be removed in clean up path

Signed-off-by: Balaji T K <balajitk@ti.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22 08:40:41 -04:00
David Lanzendörfer 19b7f796c3 mmc: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs
The Allwinner sunxi mmc host uses dma in bus-master mode using a built-in
designware idmac controller, which is identical to the one found in the
mmc-dw hosts. However the rest of the host is not identical to mmc-dw, it
deals with sending stop commands in hardware which makes it significantly
different from the mmc-dw devices.

Signed-off-by: David Lanzendörfer <david.lanzendoerfer@o2s.ch>
[hdegoede@redhat.com: various cleanups and fixes]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22 08:40:40 -04:00
Axel Lin 6f243f6334 mmc: wmt-sdmmc: Use GFP_KERNEL instead of hard-coded value
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22 08:40:40 -04:00
Axel Lin 03a1685340 mmc: omap: Use DIV_ROUND_UP instead of open coded
Also uses NSEC_PER_SEC and USEC_PER_SEC instead of hard-coded value.
This makes the intention more clear.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22 08:33:31 -04:00
Doug Anderson e6cc0123d9 mmc: dw_mmc: Don't print data errors
Data errors are completely expected during tuning.  Printing them out
is confusing people looking at the kernel logs.  They see things like:

 [    3.613296] dwmmc_exynos 12200000.dwmmc0: data error, status 0x00000088

...and they think something is wrong with their hardware.

Remove the printouts.  We'll leave it up to a higher level to report
about errors.

Signed-off-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22 08:33:31 -04:00
Russell King da91a8f9c0 mmc: sdhci: track whether preset mode is currently enabled in hardware
Track whether preset mode is currently enabled in hardware, and use that
when making decisions elsewhere in the code rather than reading the
register and checking the bit.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Markus Pargmann <mpa@pengutronix.de>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22 08:33:30 -04:00
Russell King 24fbb3ca14 mmc: sdhci: move remaining power handling into sdhci_set_power()
Move the remaining parts of the power handling in sdhci_do_set_ios()
into sdhci_set_power().

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Markus Pargmann <mpa@pengutronix.de>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22 08:33:30 -04:00
Russell King e921a8b6c4 mmc: sdhci: move regulator handling into sdhci_set_power()
Move the regulator handling into sdhci_set_power() rather than being in
sdhci_do_set_ios().  This wraps all power control up into this function.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Markus Pargmann <mpa@pengutronix.de>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22 08:33:29 -04:00
Russell King b4f3b7c8b1 mmc: sdhci-tegra: get rid of special PRESENT_STATE register handling
sdhci-tegra provides a get_ro method, which overrides the checking
of the write protect bit in the PRESENT_STATE register in sdhci.c:

        if (host->flags & SDHCI_DEVICE_DEAD)
                is_readonly = 0;
        else if (host->ops->get_ro)
                is_readonly = host->ops->get_ro(host);
        else
                is_readonly = !(sdhci_readl(host, SDHCI_PRESENT_STATE)
                                & SDHCI_WRITE_PROTECT);

This means it's pointless detecting accesses to this register and
manually setting the SDHCI_WRITE_PROTECT as it has no effect.

This means that the whole of tegra_sdhci_readl() can be removed and
we can use the builtin sdhci readl functionality here.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22 08:33:28 -04:00
Russell King c314b2b10b mmc: sdhci: remove platform_suspend/platform_resume callbacks
The only user (sdhci-of-esdhc) no longer uses these callbacks, so lets
remove them to discourage any further use.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Markus Pargmann <mpa@pengutronix.de>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22 08:33:28 -04:00
Russell King 723f7924e8 mmc: sdhci-of-esdhc: remove platform_suspend/platform_resume callbacks
We don't need these hooks in order to insert code in these paths, we
can just provide our own handlers and call the main sdhci handlers as
appropriate.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Markus Pargmann <mpa@pengutronix.de>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22 08:33:27 -04:00
Russell King 850a29b859 mmc: sdhci-esdhc-imx: remove emulation of uhs_mode
We no longer need to emulate the uhs_mode field of the host control2
register - the main sdhci driver never reads this back to evaluate
the current mode as it caches the current mode instead.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Markus Pargmann <mpa@pengutronix.de>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22 08:33:27 -04:00
Russell King 4b6f37d3a3 mmc: sdhci: clean up sdhci_execute_tuning() decision
Clean up the code in sdhci_execute_tuning() so the decision whether
to execute tuning is clearer - and despite this reflecting what the
original code was doing, it shows that it may not be what the author
actually intended.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Markus Pargmann <mpa@pengutronix.de>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22 08:33:26 -04:00
Russell King d975f12101 mmc: sdhci: cache timing information locally
Rather than reading back the timing information from the registers,
cache it locally.  This allows implementations to translate the UHS
timing by overriding the set_uhs_signaling() method as required
without also having to emulate the SDHCI_HOST_CONTROL2 register.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Markus Pargmann <mpa@pengutronix.de>
Tested-by: Stephen Warren <swarren@nvidia.com>
[Ulf Hansson] Resolved conflict
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22 08:33:25 -04:00
Russell King 96d7b78cfc mmc: sdhci: convert sdhci_set_uhs_signaling() into a library function
Add sdhci_set_uhs_signaling() and always call the set_uhs_signaling
method.  This avoids quirks being added into sdhci_set_uhs_signaling().

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Markus Pargmann <mpa@pengutronix.de>
Tested-by: Stephen Warren <swarren@nvidia.com>
[Ulf Hansson] Resolved conflict
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22 08:33:11 -04:00
Russell King 13e645012d mmc: sdhci: set_uhs_signaling() need not return a value
The set_uhs_signaling() method gives the impression that it can fail,
but anything returned from the method is entirely ignored by the sdhci
driver.  So returning failure has no effect.

So, kill the idea that it's possible for this to return an error by
removing the returned value.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Markus Pargmann <mpa@pengutronix.de>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22 07:26:34 -04:00
Russell King cb399da401 mmc: sdhci-esdhc-imx: fix lockdep splat upon tuning
=================================
[ INFO: inconsistent lock state ]
3.14.0-rc1+ #490 Not tainted
---------------------------------
inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
kworker/u8:0/6 [HC0[0]:SC0[0]:HE1:SE1] takes:
 (&(&host->lock)->rlock#2){?.-...}, at: [<c04b57a4>] esdhc_send_tuning_cmd+0x104/0x14c
{IN-HARDIRQ-W} state was registered at:
  [<c00652fc>] mark_lock+0x15c/0x6f8
  [<c0066354>] __lock_acquire+0xabc/0x1ca0
  [<c0067ad8>] lock_acquire+0xa0/0x130
  [<c0697a44>] _raw_spin_lock+0x34/0x44
  [<c04b0dbc>] sdhci_irq+0x20/0xa40
  [<c0071b1c>] handle_irq_event_percpu+0x74/0x284
  [<c0071d70>] handle_irq_event+0x44/0x64
  [<c0074db8>] handle_fasteoi_irq+0xac/0x140
  [<c007147c>] generic_handle_irq+0x28/0x38
  [<c000efd4>] handle_IRQ+0x40/0x98
  [<c0008584>] gic_handle_irq+0x30/0x64
  [<c0013144>] __irq_svc+0x44/0x58
  [<c0028fc8>] irq_exit+0xc0/0x120
  [<c000efd8>] handle_IRQ+0x44/0x98
  [<c0008584>] gic_handle_irq+0x30/0x64
  [<c0013144>] __irq_svc+0x44/0x58
  [<c068f398>] printk+0x3c/0x44
  [<c03191d0>] _regulator_get+0x1b4/0x1e0
  [<c031924c>] regulator_get+0x18/0x1c
  [<c049fbc4>] mmc_add_host+0x30/0x1c0
  [<c04b2e10>] sdhci_add_host+0x804/0xbbc
  [<c04b5318>] sdhci_esdhc_imx_probe+0x380/0x674
  [<c036d530>] platform_drv_probe+0x20/0x50
  [<c036b948>] driver_probe_device+0x120/0x234
  [<c036baf8>] __driver_attach+0x9c/0xa0
  [<c036a04c>] bus_for_each_dev+0x5c/0x90
  [<c036b418>] driver_attach+0x24/0x28
  [<c036b018>] bus_add_driver+0xe4/0x1d8
  [<c036c1b0>] driver_register+0x80/0xfc
  [<c036ce28>] __platform_driver_register+0x50/0x64
  [<c093706c>] sdhci_esdhc_imx_driver_init+0x18/0x20
  [<c0008834>] do_one_initcall+0x3c/0x164
  [<c0901c94>] kernel_init_freeable+0x104/0x1d0
  [<c068c45c>] kernel_init+0x10/0x118
  [<c000e768>] ret_from_fork+0x14/0x2c
irq event stamp: 5933
hardirqs last  enabled at (5933): [<c069813c>] _raw_spin_unlock_irqrestore+0x38/0x4c
hardirqs last disabled at (5932): [<c0697b04>] _raw_spin_lock_irqsave+0x24/0x60
softirqs last  enabled at (5914): [<c0028ba0>] __do_softirq+0x260/0x360
softirqs last disabled at (5909): [<c0028fc8>] irq_exit+0xc0/0x120

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(&(&host->lock)->rlock#2);
  <Interrupt>
    lock(&(&host->lock)->rlock#2);

 *** DEADLOCK ***

2 locks held by kworker/u8:0/6:
 #0:  (kmmcd){.+.+.+}, at: [<c003d890>] process_one_work+0x134/0x4e8
 #1:  ((&(&host->detect)->work)){+.+.+.}, at: [<c003d890>] process_one_work+0x134/0x4e8

stack backtrace:
CPU: 2 PID: 6 Comm: kworker/u8:0 Not tainted 3.14.0-rc1+ #490
Workqueue: kmmcd mmc_rescan
Backtrace:
[<c00124a0>] (dump_backtrace) from [<c0012640>] (show_stack+0x18/0x1c)
[<c0012628>] (show_stack) from [<c069164c>] (dump_stack+0x70/0x8c)
[<c06915dc>] (dump_stack) from [<c068f080>] (print_usage_bug+0x274/0x2e4)
[<c068ee0c>] (print_usage_bug) from [<c0065774>] (mark_lock+0x5d4/0x6f8)
[<c00651a0>] (mark_lock) from [<c0065e6c>] (__lock_acquire+0x5d4/0x1ca0)
[<c0065898>] (__lock_acquire) from [<c0067ad8>] (lock_acquire+0xa0/0x130)
[<c0067a38>] (lock_acquire) from [<c0697a44>] (_raw_spin_lock+0x34/0x44)
[<c0697a10>] (_raw_spin_lock) from [<c04b57a4>] (esdhc_send_tuning_cmd+0x104/0x14c)
[<c04b56a0>] (esdhc_send_tuning_cmd) from [<c04b582c>] (esdhc_executing_tuning+0x40/0x100)
[<c04b57ec>] (esdhc_executing_tuning) from [<c04afa54>] (sdhci_execute_tuning+0xcc/0x754)
[<c04af988>] (sdhci_execute_tuning) from [<c04a4684>] (mmc_sd_init_card+0x65c/0x694)
[<c04a4028>] (mmc_sd_init_card) from [<c04a48f0>] (mmc_attach_sd+0xb0/0x184)
[<c04a4840>] (mmc_attach_sd) from [<c049eb28>] (mmc_rescan+0x26c/0x2e8)
[<c049e8bc>] (mmc_rescan) from [<c003d914>] (process_one_work+0x1b8/0x4e8)
[<c003d75c>] (process_one_work) from [<c003e090>] (worker_thread+0x13c/0x3f8)
[<c003df54>] (worker_thread) from [<c00449bc>] (kthread+0xcc/0xe8)
[<c00448f0>] (kthread) from [<c000e768>] (ret_from_fork+0x14/0x2c)

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Markus Pargmann <mpa@pengutronix.de>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22 07:26:33 -04:00
Russell King 10cf496300 mmc: sdhci-esdhc-imx: comment runtime_pm_get_sync() in esdhc_prepare_tuning()
It is far from obvious what this is doing, and it looks like it's an
unbalanced runtime_pm_get() call.  However, the put is inside
sdhci_tasklet_finish(), so it's not unbalanced at all.  This should
be documented so people know what's going on here.  Do so.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Markus Pargmann <mpa@pengutronix.de>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22 07:26:33 -04:00
Russell King 9d2fc80fb1 mmc: sdhci-esdhc-imx: avoid DMA to kernel stack
sdhci-esdhc-imx tries to DMA to the kernel stack when tuning the
interface, which causes dma-debug to complain.  Fix this by kmallocing
a buffer to hold the received tuning pattern.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Markus Pargmann <mpa@pengutronix.de>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22 07:26:32 -04:00
Russell King 1771059cf5 mmc: sdhci: convert sdhci_set_clock() into a library function
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Markus Pargmann <mpa@pengutronix.de>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22 07:26:32 -04:00