Commit Graph

162 Commits

Author SHA1 Message Date
Andrew Vasquez 24a081386e [SCSI] qla2xxx: Explicitly set the execution-throttle with recent ISPs.
Firmware semantics changed for 24xx and above ISPs in their
handling of the specified execution-throttle passed during
firmware initialization.  The original codes use of a theoretical
maximum (0xffff, as carried over from earlier ISPs) could in fact
act as a throttle in some circumstances.  Now set the value based
of the firmware's own 'resource' (exchange IOCBs) capabilities.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03 09:22:52 -05:00
Andrew Vasquez d743de6675 [SCSI] qla2xxx: Reduce request queue-size overhead with recent ISPs.
The original code to 'resize request-queues' based on iocb-counts
and employed during early ISP23xx testing was too
overly-pessimistic with regards to latencies in the firmware
pulling requests.  Recent ISPs can easily keep up processing a
stream of commands from an abbreviated (effectively, half the
original size) queue.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03 09:22:52 -05:00
Andrew Vasquez 3d79038f92 [SCSI] qla2xxx: Always use an FLT's NVRAM/VPD region information.
Rather than assuming a particular layout of the data.  Applies to
recent ISPs only.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03 09:22:51 -05:00
Shyam Sundar ddb9b12632 [SCSI] qla2xxx: Cleanup unused flags and #defines.
General cleanup of extraneous/legacy crud.

Additional cleanups and
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03 09:22:50 -05:00
Lalit Chandivade 2533cf671d [SCSI] qla2xxx: Correct ISP abort semantics for NVRAM, VPD, and flash update.
Ensure that an ISP-abort has completed before performing any
update.  After the update do not wait for an ISP-abort completion,
instead just wait until the ISP is reset.  This avoids long
delays due to waiting for loop ready in qla2x00_abort_isp().

Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com>
Additional cleanups and
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03 09:22:49 -05:00
Joe Carnuccio 1d2874de80 [SCSI] qla2xxx: Add Flash-Access-Control support for recent ISPs.
Given the low-level interface varies from one flash-part
manufacturer to the next, the Flash-Access-Control (FAC) mailbox
command makes the specific flash type transparent to the driver
by encapsulating a basic set of accessor and update routines.
Use these new routines where applicable by querying FAC opcode
get-sector-size at init-time.

Additional cleanups and
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03 09:22:48 -05:00
Andrew Vasquez 55a961581f [SCSI] qla2xxx: Update MPI/PHY version retrieval codes.
Reflects layout and format of latest specification.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03 09:22:47 -05:00
Andrew Vasquez b64b0e8fd9 [SCSI] qla2xxx: Pass in optional extended-initialization control block.
Recent ISPs use this data to configure FCF information.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03 09:22:46 -05:00
Andrew Vasquez dda772e8e3 [SCSI] qla2xxx: Always (re)read firmware version/capabilities information.
With recent ISPs loading firmware from flash, a flash-update to
the firmware-image region with a follow-on reset will reload the
new image.

Original caching of data only made sense when firmware was bound
with the driver.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03 09:22:45 -05:00
Giridhar Malavali 7d9dade34b [SCSI] qla2xxx: Correct over-allocation of firmware-dump buffer.
fce_size should be calculated based on the FCE_SIZE #define.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03 09:22:45 -05:00
Andrew Vasquez c6b2fca820 [SCSI] qla2xxx: Correct truncation in return-code status checking.
QLA_* return codes are 'int' in size.  There were still several
legacy check-points which assumed a return-code width of 8-bits.
This could cause incorrect assumptions of 'good' status if a
return of QLA_FUNCTION_TIMEOUT.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-10 09:27:54 -05:00
Anirban Chakraborty ee546b6e04 [SCSI] qla2xxx: Correct vport delete bug.
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-10 09:27:54 -05:00
Lalit Chandivade 605aa2bcd5 [SCSI] qla2xxx: Use correct value for max vport in LOOP topology.
Use minimum value for max vport during firmware initialization in LOOP
topology. Using max vport value from get resource count in LOOP topology
causes firmware initialization failure.

Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-10 09:27:54 -05:00
Anirban Chakraborty 618a752319 [SCSI] qla2xxx: Remove interrupt request bit check in the response processing path in multiq mode.
Correct response-queue-0 processing by instructing the firmware
to run with interrupt-handshaking disabled, similarly to what is
now done for all non-0 response queues.  Since all
response-queues now run in the same mode, the driver no longer
needs the hot-path 'is-disabled-HCCR' test.

Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-02-10 11:15:19 -05:00
Andrew Vasquez eaac30be26 [SCSI] qla2xxx: Modify firmware-load order precedence for ISP81XX parts.
Pre-ISP81XX parts (including ISP24xx and ISP25xx) could contain a
firmware image within a segment of flash, driver would fallback
to loading this firmware if the request-firmware interface failed
(userspace .bin file).  Moving forward, all ISP81XX parts will
ship with a suggested-to-be-used firmware image within flash
which all driver should first attempt to load.  If the flash
firmware load fails, the driver will then fallback to loading
firmware via the request-firmware interface (ql8100_fw.bin).

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-25 07:57:08 -06:00
Andrew Vasquez 09ff36d30c [SCSI] qla2xxx: Ensure RISC-interrupt-enabled consistency for IS_NOPOLLING_TYPE() ISPs.
Original code should work as well given qla24xx_reset_adapter()
is only called in extreme cases where the HBA is taken offline.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-25 07:56:35 -06:00
Anirban Chakraborty 29bdccbee6 [SCSI] qla2xxx: Fix ISP restart bug in multiq code
After restarting ISP the additional queues are not being setup correctly. The
following patch fixes the issue.
Please apply.

Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-13 10:36:01 -06:00
Andrew Vasquez 3a03eb797c [SCSI] qla2xxx: Add ISP81XX support.
Codes to support new FCoE boards.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-07 15:51:44 -06:00
Andrew Vasquez bb99de6703 [SCSI] qla2xxx: Collapse EFT/FCE copy procedures during a firmware dump.
In preparation for new ISP types with varying dump procedures.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-07 15:50:31 -06:00
Andrew Vasquez 124f85e6cc [SCSI] qla2xxx: Don't fallback to interrupt-polling during re-initialization with MSI-X enabled.
ROMs in recent ISPs have MSI-X support, so it's no longer
necessary for the driver to fallback to interrupt polling during
ISP re-initialization.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-07 15:49:45 -06:00
Andrew Vasquez 1ded85e285 [SCSI] qla2xxx: Remove support for reading/writing HW-event-log.
Software should not touch this region of flash, as the firmware
will be the only writer and consumer of the region.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-07 15:49:15 -06:00
Anirban Chakraborty 17d98630a4 [SCSI] qla2xxx: changes in multiq code
Following changes have been made:
 1. Scan outstanding commands only in the queue where it is submitted
 2. Update queue registers directly in the fast path
 3. Queue specific BAR is remapped only for multiq capable adapters

Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-29 11:24:35 -06:00
Anirban Chakraborty 73208dfd7a [SCSI] qla2xxx: add support for multi-queue adapter
Following changes have been made.
1. qla_hw_data structure holds an array for request queue pointers,
and an array for response queue pointers.
2. The base request and response queues are created by default.
3. Additional request and response queues are created at the time of vport
creation. If queue resources are exhausted during vport creation, newly
created vports use the default queue.
4. Requests are sent to the request queue that the vport was assigned
in the beginning.
5. Responses are completed on the response queue with which the request queue
is associated with.

[fixup memcpy argument reversal spotted by davej@redhat.com]
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-29 11:24:33 -06:00
Anirban Chakraborty e315cd28b9 [SCSI] qla2xxx: Code changes for qla data structure refactoring
Following changes have been made:

1. Outstanding commands are based on a request queue, scsi_qla_host
   does not maintain it anymore.

2. start_scsi is accessed via isp_ops struct instead of direct
   invocation.

3. Interrupt registrations are done using response queue instead of
   device id.

Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-29 11:24:16 -06:00
Shyam Sundar 680d7db88a [SCSI] qla2xxx: Do not honour max_vports from firmware for 2G ISPs and below.
For 23XX ISPs, max_vports may return an invalid value.
Do not honour it.

Cc: Stable Tree <stable@kernel.org>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-11-05 12:41:49 -05:00
Andrew Vasquez 737faece27 [SCSI] qla2xxx: Use pci_disable_rom() to manipulate PCI config space.
http://bugzilla.kernel.org/show_bug.cgi?id=9422

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-11-05 12:41:28 -05:00
Bjorn Helgaas cc3ef7bc40 [SCSI] qla2xxx: Fix "occured" spelling errors.
Fix "occured" spelling errors.  Most of these are in comments, which
I wouldn't normally bother with, but a couple are in printks, which
irritate me more.  So I just fixed them all at the same time.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-03 11:46:18 -05:00
Andrew Vasquez c00d8994d9 [SCSI] qla2xxx: Add Flash Layout Table support.
The Flash Layout Table (FLT) present on many recent HBAs encodes
flash usage information, organizes data stored into separate
regions and presents the information uniformly to the driver.
Use this information rather than using specific hard-coded values
based on ISP type.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-03 11:46:17 -05:00
Andrew Vasquez 4b89258c73 [SCSI] qla2xxx: Change GFP_ATOMIC to GFP_KERNEL for non-atomic allocations.
Both call-sites are sleeping-capable.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-03 11:46:17 -05:00
Mike Hernandez 946fb8915a [SCSI] qla2xxx: Set npiv_supported flag for FCoE HBAs.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-08-16 10:22:35 -05:00
Andrew Vasquez a7a28504bf [SCSI] qla2xxx: Correct vport-state management issues during ISP-ABORT.
* Use correct 'ha' to mark a device lost from ISR.
  I/Os will always be returned on the physical-HA.
  qla2x00_mark_device_lost() should be called with the HA bound
  to the fcport.
* Mark *all* devices lost during ISP-ABORT (bighammer).

These fixes correct issues discovered locally where during
link-perturbation and heavy vport-I/O fcport/rport states would
stray and an rport's scsi-target lost (timed-out).

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-08-16 10:22:01 -05:00
Andrew Vasquez c9c5ced90a [SCSI] qla2xxx: Additional NPIV corrections.
Minor fixes addressing:
- rport managements during vport deletion.
- acquire proper physical-ha during qla24xx_abort_command() and
  qla24xx_queuecommand()
- do not needlessly acquire the pha for non-NPIV capable ISPs.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26 15:31:30 -04:00
Andrew Vasquez 8201e20799 [SCSI] qla2xxx: Issue proper ISP callbacks during stop-firmware.
As the original code would incorrectly call the non-ISP24xx/25xx
callbacks during recovery, a stop-firmware failure could result
in improper bit-banging of the RISC and in some cases manifest in
a NMI-watchdog trigger due to the RISC not coming out of its
reset state.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26 15:29:43 -04:00
Andrew Vasquez 6d0525292a [SCSI] qla2xxx: Don't hardcode fw_transfer_size for ISP2[45]xx parts.
Use the full buffer size available, as there's no reason to limit
the firwmare-image load-segment size for these parts.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26 15:14:46 -04:00
Andrew Vasquez 42e421b184 [SCSI] qla2xxx: Verify the RISC is not in ROM code if firmware-load is disabled.
Add an additional check to verify that the current executing
firmware is in fact non-ROM code.  The non-ROM Get-ID mailbox
command is used for verification.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26 15:14:46 -04:00
Seokmann Ju 5de1f70f41 [SCSI] qla2xxx: Correct rport/fcport visibility-state handling during loop-resync.
There were several issues here, one, during RSCN handling if a
follow-on RSCN occurred (within interrupt context) the DPC thread
could inadvertantly leave the fcport in a stale lost state.
Secondly, scheduled rport removal is handled exclusively by the
'parent' DPC thread, so wake up the proper thread.  Finally,
process vport loop-resync's only when the vport has in an
"active" state (ID acquired).

Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26 15:14:44 -04:00
Seokmann Ju 246de42cfc [SCSI] qla2xxx: Always aquire the parent's hardware_lock.
While issuing a marker, manipulating the request/response queues
and modifying the outstanding command array.

Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26 15:14:40 -04:00
Andrew Vasquez 436a7b1123 [SCSI] qla2xxx: Swap enablement order of EFT and FCE.
The firmware group has suggested that FCE (Fibre Channel Event)
tracing be enabled prior to EFT (Extended Firmware Tracing) to
maximize the capturing of data on the wire.  This change has no
real semantic effect on driver operation, as it's mostly a
shuffling of code.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26 15:14:40 -04:00
Joe Carnuccio 1ee2714632 [SCSI] qla2xxx: Retrieve board serial-number and description from VPD.
Recent ISPs have this information written at manufacturing time,
so use the information.  This also reduces future churn of the
qla_devtbl.h file contents, as the driver can now depend on the
information to be present in VPD.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26 15:14:39 -04:00
Andrew Vasquez e5896bd5dc [SCSI] qla2xxx: Allow the user the option of disabling iIDMA.
iIDMA support requires the driver issue several additional
fabric-managegment (FM) commands per port discovered during SNS
scanning -- GFPN (Get Fabric Port Name) and GPSC (Get Port Speed
Capabilities).  It has been found during testing that some
switches do not respond as *well* as expected to these commands
(silence -- no ACC nor BS_RJT).  So, to handle such conditions,
allow the user the ability to indirectly disable the FM commands
by disabling iIDMA with the ql2xiidmaenable module-parameter.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26 15:14:38 -04:00
Harish Zunjarrao e5f5f6f72b [SCSI] qla2xxx: Track total number of ISP aborts.
This parameter counts the total number of ISP aborts during
driver execution.  The value is exported through a DEVICE_ATTR()
off the scsi_host.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26 15:14:37 -04:00
Seokmann Ju 5f3a9a207f [SCSI] qla2xxx: Add dev_loss_tmo_callbk/terminate_rport_io callback support.
Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26 15:14:36 -04:00
Seokmann Ju c6852c4c59 [SCSI] qla2xxx: Correct misc. endian and byte-ordering issues.
There were several places in the driver which could cause byte
ordering problem as provided by Al Viro
<viro@ZenIV.linux.org.uk>.

Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-27 12:19:59 -05:00
Seokmann Ju d4486fd6de [SCSI] qla2xxx: Consistently access the physical HA port.
There were several places where referencing ha structure of
virtual ports for resources. Among those refereces, certain
fields are get up-to-dated only on ha structure of physical port.

Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:19:15 -05:00
Harihara Kadayam 4d4df1932b [SCSI] qla2xxx: Add ISP84XX support.
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com>
Additional cleanups and
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:19:15 -05:00
Andrew Vasquez 7d232c745e [SCSI] qla2xxx: Add Flash Descriptor Table layout support.
The Flash Descriptor Table (FDT) present on many recent HBAs
encodes flash accessing characteristics of the flash-part used on
the HBA.  Use this information during flash manipulation (writes)
rather than using specific hard-coded values based on queried
manufacturer and device IDs.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:19:14 -05:00
Andrew Vasquez 587f4cae4a [SCSI] qla2xxx: Cruft cleanup of functions and structures.
Strip unused (DEBUG-ONLY) enabled functions, inlines, useless
wrappers, and unused DPC flags from the code.  Another step in
the migration towards a cleaner (less-crusty) driver.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:19:14 -05:00
Andrew Vasquez cb8dacbf11 [SCSI] qla2xxx: Add hardware trace-logging support.
Recent ISPs have a region within FLASH which acts as a repository
for the logging of serious hardware and software failures.
Currently, the region is large enough to support up to 255
entries.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:19:13 -05:00
Andrew Vasquez 5ab5a4dd54 [SCSI] qla2xxx: Use an rport's scsi_target_id member consistently throughout driver.
Rather than using a duplicate/cached value stored in the driver's
internal fcport structure.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:19:13 -05:00
Andrew Vasquez 01e58d8eac [SCSI] qla2xxx: Update copyright banner.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:19:11 -05:00