Commit Graph

11948 Commits

Author SHA1 Message Date
Christoph Hellwig 118c855b56 3w-9xxx: fix command completion race
The 3w-9xxx driver needs to tear down the dma mappings before returning
the command to the midlayer, as there is no guarantee the sglist and
count are valid after that point.  Also remove the dma mapping helpers
which have another inherent race due to the request_id index.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Acked-by: Adam Radford <aradford@gmail.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-27 10:10:19 -07:00
Christoph Hellwig 9cd9554615 3w-xxxx: fix command completion race
The 3w-xxxx driver needs to tear down the dma mappings before returning
the command to the midlayer, as there is no guarantee the sglist and
count are valid after that point.  Also remove the dma mapping helpers
which have another inherent race due to the request_id index.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Acked-by: Adam Radford <aradford@gmail.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-27 10:05:55 -07:00
Christoph Hellwig 579d69bc1f 3w-sas: fix command completion race
The 3w-sas driver needs to tear down the dma mappings before returning
the command to the midlayer, as there is no guarantee the sglist and
count are valid after that point.  Also remove the dma mapping helpers
which have another inherent race due to the request_id index.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Torsten Luettgert <ml-lkml@enda.eu>
Tested-by: Bernd Kardatzki <Bernd.Kardatzki@med.uni-tuebingen.de>
Cc: stable@vger.kernel.org
Acked-by: Adam Radford <aradford@gmail.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-27 10:04:39 -07:00
Ondrej Zary 8c08a6215a aha1542: Allocate memory before taking a lock
The driver currently calls kmalloc with GFP_KERNEL while holding a lock.
Fix it by doing the allocation earlier, before taking the lock.

Tested on AHA-1542B.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-27 10:00:30 -07:00
Mike Christie 35e9a9f939 SCSI: add 1024 max sectors black list flag
This works around a issue with qnap iscsi targets not handling large IOs
very well.

The target returns:

VPD INQUIRY: Block limits page (SBC)
  Maximum compare and write length: 1 blocks
  Optimal transfer length granularity: 1 blocks
  Maximum transfer length: 4294967295 blocks
  Optimal transfer length: 4294967295 blocks
  Maximum prefetch, xdread, xdwrite transfer length: 0 blocks
  Maximum unmap LBA count: 8388607
  Maximum unmap block descriptor count: 1
  Optimal unmap granularity: 16383
  Unmap granularity alignment valid: 0
  Unmap granularity alignment: 0
  Maximum write same length: 0xffffffff blocks
  Maximum atomic transfer length: 0
  Atomic alignment: 0
  Atomic transfer length granularity: 0

and it is *sometimes* able to handle at least one IO of size up to 8 MB. We
have seen in traces where it will sometimes work, but other times it
looks like it fails and it looks like it returns failures if we send
multiple large IOs sometimes. Also it looks like it can return 2 different
errors. It will sometimes send iscsi reject errors indicating out of
resources or it will send invalid cdb illegal requests check conditions.
And then when it sends iscsi rejects it does not seem to handle retries
when there are command sequence holes, so I could not just add code to
try and gracefully handle that error code.

The problem is that we do not have a good contact for the company,
so we are not able to determine under what conditions it returns
which error and why it sometimes works.

So, this patch just adds a new black list flag to set targets like this to
the old max safe sectors of 1024. The max_hw_sectors changes added in 3.19
caused this regression, so I also ccing stable.

Reported-by: Christian Hesse <list@eworm.de>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Cc: stable@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-27 09:38:06 -07:00
Linus Torvalds c6668726d2 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending
Pull SCSI target updates from Nicholas Bellinger:
 "Lots of activity in target land the last months.

  The highlights include:

   - Convert fabric drivers tree-wide to target_register_template() (hch
     + bart)

   - iser-target hardening fixes + v1.0 improvements (sagi)

   - Convert iscsi_thread_set usage to kthread.h + kill
     iscsi_target_tq.c (sagi + nab)

   - Add support for T10-PI WRITE_STRIP + READ_INSERT operation (mkp +
     sagi + nab)

   - DIF fixes for CONFIG_DEBUG_SG=y + UNMAP file emulation (akinobu +
     sagi + mkp)

   - Extended TCMU ABI v2 for future BIDI + DIF support (andy + ilias)

   - Fix COMPARE_AND_WRITE handling for NO_ALLLOC drivers (hch + nab)

  Thanks to everyone who contributed this round with new features,
  bug-reports, fixes, cleanups and improvements.

  Looking forward, it's currently shaping up to be a busy v4.2 as well"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (69 commits)
  target: Put TCMU under a new config option
  target: Version 2 of TCMU ABI
  target: fix tcm_mod_builder.py
  target/file: Fix UNMAP with DIF protection support
  target/file: Fix SG table for prot_buf initialization
  target/file: Fix BUG() when CONFIG_DEBUG_SG=y and DIF protection enabled
  target: Make core_tmr_abort_task() skip TMFs
  target/sbc: Update sbc_dif_generate pr_debug output
  target/sbc: Make internal DIF emulation honor ->prot_checks
  target/sbc: Return INVALID_CDB_FIELD if DIF + sess_prot_type disabled
  target: Ensure sess_prot_type is saved across session restart
  target/rd: Don't pass incomplete scatterlist entries to sbc_dif_verify_*
  target: Remove the unused flag SCF_ACK_KREF
  target: Fix two sparse warnings
  target: Fix COMPARE_AND_WRITE with SG_TO_MEM_NOALLOC handling
  target: simplify the target template registration API
  target: simplify target_xcopy_init_pt_lun
  target: remove the unused SCF_CMD_XCOPY_PASSTHROUGH flag
  target/rd: reduce code duplication in rd_execute_rw()
  tcm_loop: fixup tpgt string to integer conversion
  ...
2015-04-24 10:22:09 -07:00
Linus Torvalds b153f1d37a SCSI misc on 20150419
I'd like to say these were a set of regressions for the recent merge window
 code.  Unfortunately, they all predate the merge window code (stable cc'd).
 There's two fixes for data integrity (mostly only showing up on module
 removal), an mvsas crash with expander attached SATA devices which goes back
 to the dawn of the driver but is only just being picked up as sas expanders
 become a standard item in low end server hardware, an am53c974 one because the
 interrupt data isn't fully initialised before the line is and a megaraid_sas
 one because it uses smp_processor_id() to select MSI-X queues and that now
 triggers a WARN_ON().
 
 Signed-off-by: James Bottomley <JBottomley@Odin.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQEcBAABAgAGBQJVM+JoAAoJEDeqqVYsXL0My40H/Rtb85O+nLmsaPutyM3LqfNb
 EKeF7voVsEp2uaNodx5xYe3Q3FpGW/dfct0uSrAD1fYWkr/z+9VJlYkh1dY0Z7Tq
 FjbWufPWmRbqvk6q4C4bBkFRBKbX38cmdY9kJQgby6dqPXKhe0LKPJy+ik30b0HV
 PWK6Voh3Y41zeOk/q4I2RvEREW+cCz1PTiQRP45Y1j+ilslmDGDH95KZ3PZPwE6t
 xOfj9DpGBKmN5Fvn7mIPZA72Xpnmc3Zlw7gv8ZBctxpHRvO+woQXjRqORUEBu4bA
 Cwg9lJnyRjDiTarm9ceCm8c5bmlii6Furfn/qxxnW9d64h4K1ed6lf0D/BehAdY=
 =U1F+
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "I'd like to say these were a set of regressions for the recent merge
  window code.  Unfortunately, they all predate the merge window code
  (stable cc'd).

  There are two fixes for data integrity (mostly only showing up on
  module removal), an mvsas crash with expander attached SATA devices
  which goes back to the dawn of the driver but is only just being
  picked up as sas expanders become a standard item in low end server
  hardware, an am53c974 one because the interrupt data isn't fully
  initialised before the line is and a megaraid_sas one because it uses
  smp_processor_id() to select MSI-X queues and that now triggers a
  WARN_ON()"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  mvsas: fix panic on expander attached SATA devices
  am53c974: Fix crash during modprobe
  megaraid_sas: use raw_smp_processor_id()
  sd: Fix missing ATO tag check
  sd: Unregister integrity profile
2015-04-20 15:25:19 -07:00
Linus Torvalds 6496edfce9 This is the final removal (after several years!) of the obsolete cpus_*
functions, prompted by their mis-use in staging.
 
 With these function removed, all cpu functions should only iterate to
 nr_cpu_ids, so we finally only allocate that many bits when cpumasks
 are allocated offstack.
 
 Thanks,
 Rusty.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVNPMuAAoJENkgDmzRrbjx7ZIP/j65e6xs1jEyXR3WOYSdTU1x
 bMo6JcII6O1oEZLgyKXgx9KiBg6uIIDta1NG/H/XIe354dwfHVsHvj5HHHQR5Xof
 iRrjLOaHj4XglI3hvsk0eEEl3/OBBLgyo9bUwDvMF1fmr/9tW4caMs3Op6n7Evzm
 YIvoAyeJ0A8BfEtOU5lXhcVIGmnHtSw0x6mdGXpXIBmWYQPCtdQP868s4lnl44w0
 bSNpAYdzEqg64Ph3SK0prgWPrn5+5EiaAhV7HZzENZ5+o0DAdIXWq/W7uHyCWPKH
 536cJDojec+nSUQkPYngngGprxrKO02aBcMw/3JGJ0tdCDj8yw3XAyVAFzz4hmMb
 Lkmyv4QHHIILLvJ4ZRH5KHWCjjVBg41LNCs2H3HnoxFACdm0lZYKHsUAh2ucBVtU
 Wb/eHmLxOG43UIkpX4yrhy3SfE1ZdnOVzEzOzPXtr51t8ojqk+bLFe/hJ6EkzrQX
 X+90qHfBq+PMJlAnc3zdXHjxoJrL6KPWVwVvFrNeibgEKtVvy/BiwZkS6QceC1Ea
 TatOYA5r6awFVHHQCooN1DGAxN5Juvu2SmdnTUA9ymsCNDghj1YUoAKRNP81u8Sa
 pe3hco/63iCuPna+vlwNDU6SgsaMk9m0p+1n1BiDIfVJIkWYCNeG+u2gQkzbDKlQ
 AJuKKQv1QuZiF0ylZ0wq
 =VAgA
 -----END PGP SIGNATURE-----

Merge tag 'cpumask-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux

Pull final removal of deprecated cpus_* cpumask functions from Rusty Russell:
 "This is the final removal (after several years!) of the obsolete
  cpus_* functions, prompted by their mis-use in staging.

  With these function removed, all cpu functions should only iterate to
  nr_cpu_ids, so we finally only allocate that many bits when cpumasks
  are allocated offstack"

* tag 'cpumask-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (25 commits)
  cpumask: remove __first_cpu / __next_cpu
  cpumask: resurrect CPU_MASK_CPU0
  linux/cpumask.h: add typechecking to cpumask_test_cpu
  cpumask: only allocate nr_cpumask_bits.
  Fix weird uses of num_online_cpus().
  cpumask: remove deprecated functions.
  mips: fix obsolete cpumask_of_cpu usage.
  x86: fix more deprecated cpu function usage.
  ia64: remove deprecated cpus_ usage.
  powerpc: fix deprecated CPU_MASK_CPU0 usage.
  CPU_MASK_ALL/CPU_MASK_NONE: remove from deprecated region.
  staging/lustre/o2iblnd: Don't use cpus_weight
  staging/lustre/libcfs: replace deprecated cpus_ calls with cpumask_
  staging/lustre/ptlrpc: Do not use deprecated cpus_* functions
  blackfin: fix up obsolete cpu function usage.
  parisc: fix up obsolete cpu function usage.
  tile: fix up obsolete cpu function usage.
  arm64: fix up obsolete cpu function usage.
  mips: fix up obsolete cpu function usage.
  x86: fix up obsolete cpu function usage.
  ...
2015-04-20 10:19:03 -07:00
James Bottomley 56cbd0ccc1 mvsas: fix panic on expander attached SATA devices
mvsas is giving a General protection fault when it encounters an expander
attached ATA device.  Analysis of mvs_task_prep_ata() shows that the driver is
assuming all ATA devices are locally attached and obtaining the phy mask by
indexing the local phy table (in the HBA structure) with the phy id.  Since
expanders have many more phys than the HBA, this is causing the index into the
HBA phy table to overflow and returning rubbish as the pointer.

mvs_task_prep_ssp() instead does the phy mask using the port properties.
Mirror this in mvs_task_prep_ata() to fix the panic.

Reported-by: Adam Talbot <ajtalbot1@gmail.com>
Tested-by: Adam Talbot <ajtalbot1@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-17 10:19:07 -07:00
Hannes Reinecke 8041708ed4 am53c974: Fix crash during modprobe
On systems with shared interrupts the interrupt routine might
be called as soon as the interrupt is enabled.
As this might happen before pci_set_drvdata() is called the
system would crash.

Reported-by: Andreas Brogle <anbro@ok.de>
Tested-by: Andreas Brogle <anbro@ok.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-17 10:13:56 -07:00
Linus Torvalds 54e514b91b Merge branch 'akpm' (patches from Andrew)
Merge third patchbomb from Andrew Morton:

 - various misc things

 - a couple of lib/ optimisations

 - provide DIV_ROUND_CLOSEST_ULL()

 - checkpatch updates

 - rtc tree

 - befs, nilfs2, hfs, hfsplus, fatfs, adfs, affs, bfs

 - ptrace fixes

 - fork() fixes

 - seccomp cleanups

 - more mmap_sem hold time reductions from Davidlohr

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (138 commits)
  proc: show locks in /proc/pid/fdinfo/X
  docs: add missing and new /proc/PID/status file entries, fix typos
  drivers/rtc/rtc-at91rm9200.c: make IO endian agnostic
  Documentation/spi/spidev_test.c: fix warning
  drivers/rtc/rtc-s5m.c: allow usage on device type different than main MFD type
  .gitignore: ignore *.tar
  MAINTAINERS: add Mediatek SoC mailing list
  tomoyo: reduce mmap_sem hold for mm->exe_file
  powerpc/oprofile: reduce mmap_sem hold for exe_file
  oprofile: reduce mmap_sem hold for mm->exe_file
  mips: ip32: add platform data hooks to use DS1685 driver
  lib/Kconfig: fix up HAVE_ARCH_BITREVERSE help text
  x86: switch to using asm-generic for seccomp.h
  sparc: switch to using asm-generic for seccomp.h
  powerpc: switch to using asm-generic for seccomp.h
  parisc: switch to using asm-generic for seccomp.h
  mips: switch to using asm-generic for seccomp.h
  microblaze: use asm-generic for seccomp.h
  arm: use asm-generic for seccomp.h
  seccomp: allow COMPAT sigreturn overrides
  ...
2015-04-17 09:04:38 -04:00
Jiri Slaby 8f7d3f0f1e bfs: bfad_worker cleanup
This kthread is not loop at all due to break at the end of the loop.  Make
that function linear, with no while loop.

And remove an unnecessary cast.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17 09:04:09 -04:00
Linus Torvalds 7d69cff26c SCSI misc on 20150416
This is the usual grab bag of driver updates (lpfc, qla2xxx, storvsc, aacraid,
 ipr) plus an assortment of minor updates.  There's also a major update to
 aic1542 which moves the driver into this millenium.
 
 Signed-off-by: James Bottomley <JBottomley@Odin.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQEcBAABAgAGBQJVL/DEAAoJEDeqqVYsXL0MOwgIALPlgI0aMAtX5wLxzPMLB/2j
 fhNlsB9XZ6TeYIqE7syOY7geVJqsbACMGmDhGHs5Gt6jkTnwix/G49x3T1PXBODZ
 frz8GgNB6iGSqfCp+YbhJkTNHdudDIy2LrQ92EzNMb2+x0v6KTYTSq2dekgrC1zK
 8GUZ9bEzuxEGaBx9TK/Sy6H8QpvMtqqJig2eCL189U3JMMU3okWtSGya708u5Whh
 knbUgraMxFWNs+oHJHFclVYvekP+61i/TVyacQEM4KLDsmlxsLn49eRdiGMY6rpX
 LgDIvMjggQhbY2WcCXzetF7tsFFl0joJp1wFK1fUn9YN5e+J3MRWYVBDt8FMPX8=
 =OBny
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This is the usual grab bag of driver updates (lpfc, qla2xxx, storvsc,
  aacraid, ipr) plus an assortment of minor updates.  There's also a
  major update to aic1542 which moves the driver into this millenium"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (106 commits)
  change SCSI Maintainer email
  sd, mmc, virtio_blk, string_helpers: fix block size units
  ufs: add support to allow non standard behaviours (quirks)
  ufs-qcom: save controller revision info in internal structure
  qla2xxx: Update driver version to 8.07.00.18-k
  qla2xxx: Restore physical port WWPN only, when port down detected for FA-WWPN port.
  qla2xxx: Fix virtual port configuration, when switch port is disabled/enabled.
  qla2xxx: Prevent multiple firmware dump collection for ISP27XX.
  qla2xxx: Disable Interrupt handshake for ISP27XX.
  qla2xxx: Add debugging info for MBX timeout.
  qla2xxx: Add serdes read/write support for ISP27XX
  qla2xxx: Add udev notification to save fw dump for ISP27XX
  qla2xxx: Add message for sucessful FW dump collected for ISP27XX.
  qla2xxx: Add support to load firmware from file for ISP 26XX/27XX.
  qla2xxx: Fix beacon blink for ISP27XX.
  qla2xxx: Increase the wait time for firmware to be ready for P3P.
  qla2xxx: Fix crash due to wrong casting of reg for ISP27XX.
  qla2xxx: Fix warnings reported by static checker.
  lpfc: Update version to 10.5.0.0 for upstream patch set
  lpfc: Update copyright to 2015
  ...
2015-04-16 19:02:04 -04:00
Linus Torvalds 497a5df7bf xen: features and fixes for 4.1-rc0
- Use a single source list of hypercalls, generating other tables
   etc. at build time.
 - Add a "Xen PV" APIC driver to support >255 VCPUs in PV guests.
 - Significant performance improve to guest save/restore/migration.
 - scsiback/front save/restore support.
 - Infrastructure for multi-page xenbus rings.
 - Misc fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQEcBAABAgAGBQJVL6OZAAoJEFxbo/MsZsTRs3YH/2AycBHs129DNnc2OLmOklBz
 AdD43k+FOfZlv0YU80WmPVmOpGGHGB5Pqkix2KtnvPYmtx3pb/5ikhDwSTWZpqBl
 Qq6/RgsRjYZ8VMKqrMTkJMrJWHQYbg8lgsP5810nsFBn/Qdbxms+WBqpMkFVo3b2
 rvUZj8QijMJPS3qr55DklVaOlXV4+sTAytTdCiubVnaB/agM2jjRflp/lnJrhtTg
 yc4NTrIlD1RsMV/lNh92upBP/pCm6Bs0zQ2H1v3hkdhBBmaO0IVXpSheYhfDOHfo
 9v209n137N7X86CGWImFk6m2b+EfiFnLFir07zKSA+iZwkYKn75znSdPfj0KCc0=
 =bxTm
 -----END PGP SIGNATURE-----

Merge tag 'stable/for-linus-4.1-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

Pull xen features and fixes from David Vrabel:

 - use a single source list of hypercalls, generating other tables etc.
   at build time.

 - add a "Xen PV" APIC driver to support >255 VCPUs in PV guests.

 - significant performance improve to guest save/restore/migration.

 - scsiback/front save/restore support.

 - infrastructure for multi-page xenbus rings.

 - misc fixes.

* tag 'stable/for-linus-4.1-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/pci: Try harder to get PXM information for Xen
  xenbus_client: Extend interface to support multi-page ring
  xen-pciback: also support disabling of bus-mastering and memory-write-invalidate
  xen: support suspend/resume in pvscsi frontend
  xen: scsiback: add LUN of restored domain
  xen-scsiback: define a pr_fmt macro with xen-pvscsi
  xen/mce: fix up xen_late_init_mcelog() error handling
  xen/privcmd: improve performance of MMAPBATCH_V2
  xen: unify foreign GFN map/unmap for auto-xlated physmap guests
  x86/xen/apic: WARN with details.
  x86/xen: Provide a "Xen PV" APIC driver to support >255 VCPUs
  xen/pciback: Don't print scary messages when unsupported by hypervisor.
  xen: use generated hypercall symbols in arch/x86/xen/xen-head.S
  xen: use generated hypervisor symbols in arch/x86/xen/trace.c
  xen: synchronize include/xen/interface/xen.h with xen
  xen: build infrastructure for generating hypercall depending symbols
  xen: balloon: Use static attribute groups for sysfs entries
  xen: pcpu: Use static attribute groups for sysfs entry
2015-04-16 14:01:03 -05:00
Linus Torvalds d19d5efd8c powerpc updates for 4.1
- Numerous minor fixes, cleanups etc.
 - More EEH work from Gavin to remove its dependency on device_nodes.
 - Memory hotplug implemented entirely in the kernel from Nathan Fontenot.
 - Removal of redundant CONFIG_PPC_OF by Kevin Hao.
 - Rewrite of VPHN parsing logic & tests from Greg Kurz.
 - A fix from Nish Aravamudan to reduce memory usage by clamping
   nodes_possible_map.
 - Support for pstore on powernv from Hari Bathini.
 - Removal of old powerpc specific byte swap routines by David Gibson.
 - Fix from Vasant Hegde to prevent the flash driver telling you it was flashing
   your firmware when it wasn't.
 - Patch from Ben Herrenschmidt to add an OPAL heartbeat driver.
 - Fix for an oops causing get/put_cpu_var() imbalance in perf by Jan Stancek.
 - Some fixes for migration from Tyrel Datwyler.
 - A new syscall to switch the cpu endian by Michael Ellerman.
 - Large series from Wei Yang to implement SRIOV, reviewed and acked by Bjorn.
 - A fix for the OPAL sensor driver from Cédric Le Goater.
 - Fixes to get STRICT_MM_TYPECHECKS building again by Michael Ellerman.
 - Large series from Daniel Axtens to make our PCI hooks per PHB rather than per
   machine.
 - Small patch from Sam Bobroff to explicitly abort non-suspended transactions
   on syscalls, plus a test to exercise it.
 - Numerous reworks and fixes for the 24x7 PMU from Sukadev Bhattiprolu.
 - Small patch to enable the hard lockup detector from Anton Blanchard.
 - Fix from Dave Olson for missing L2 cache information on some CPUs.
 - Some fixes from Michael Ellerman to get Cell machines booting again.
 - Freescale updates from Scott: Highlights include BMan device tree nodes, an
   MSI erratum workaround, a couple minor performance improvements, config
   updates, and misc fixes/cleanup.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVL2cxAAoJEFHr6jzI4aWAR8cP/19VTo/CzCE4ffPSx7qR464n
 F+WFZcbNjIMXu6+B0YLuJZEsuWtKKrCit/MCg3+mSgE4iqvxmtI+HDD0445Buszj
 UD4E4HMdPrXQ+KUSUDORvRjv/FFUXIa94LSv/0g2UeMsPz/HeZlhMxEu7AkXw9Nf
 rTxsmRTsOWME85Y/c9ss7XHuWKXT3DJV7fOoK9roSaN3dJAuWTtG3WaKS0nUu0ok
 0M81D6ZczoD6ybwh2DUMPD9K6SGxLdQ4OzQwtW6vWzcQIBDfy5Pdeo0iAFhGPvXf
 T4LLPkv4cF4AwHsAC4rKDPHQNa+oZBoLlScrHClaebAlDiv+XYKNdMogawUObvSh
 h7avKmQr0Ygp1OvvZAaXLhuDJI9FJJ8lf6AOIeULgHsDR9SyKMjZWxRzPe11uarO
 Fyi0qj3oJaQu6LjazZraApu8mo+JBtQuD3z3o5GhLxeFtBBF60JXj6zAXJikufnl
 kk1/BUF10nKUhtKcDX767AMUCtMH3fp5hx8K/z9T5v+pobJB26Wup1bbdT68pNBT
 NjdKUppV6QTjZvCsA6U2/ECu6E9KeIaFtFSL2IRRoiI0dWBN5/5eYn3RGkO2ZFoL
 1NdwKA2XJcchwTPkpSRrUG70sYH0uM2AldNYyaLfjzrQqza7Y6lF699ilxWmCN/H
 OplzJAE5cQ8Am078veTW
 =03Yh
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux

Pull powerpc updates from Michael Ellerman:

 - Numerous minor fixes, cleanups etc.

 - More EEH work from Gavin to remove its dependency on device_nodes.

 - Memory hotplug implemented entirely in the kernel from Nathan
   Fontenot.

 - Removal of redundant CONFIG_PPC_OF by Kevin Hao.

 - Rewrite of VPHN parsing logic & tests from Greg Kurz.

 - A fix from Nish Aravamudan to reduce memory usage by clamping
   nodes_possible_map.

 - Support for pstore on powernv from Hari Bathini.

 - Removal of old powerpc specific byte swap routines by David Gibson.

 - Fix from Vasant Hegde to prevent the flash driver telling you it was
   flashing your firmware when it wasn't.

 - Patch from Ben Herrenschmidt to add an OPAL heartbeat driver.

 - Fix for an oops causing get/put_cpu_var() imbalance in perf by Jan
   Stancek.

 - Some fixes for migration from Tyrel Datwyler.

 - A new syscall to switch the cpu endian by Michael Ellerman.

 - Large series from Wei Yang to implement SRIOV, reviewed and acked by
   Bjorn.

 - A fix for the OPAL sensor driver from Cédric Le Goater.

 - Fixes to get STRICT_MM_TYPECHECKS building again by Michael Ellerman.

 - Large series from Daniel Axtens to make our PCI hooks per PHB rather
   than per machine.

 - Small patch from Sam Bobroff to explicitly abort non-suspended
   transactions on syscalls, plus a test to exercise it.

 - Numerous reworks and fixes for the 24x7 PMU from Sukadev Bhattiprolu.

 - Small patch to enable the hard lockup detector from Anton Blanchard.

 - Fix from Dave Olson for missing L2 cache information on some CPUs.

 - Some fixes from Michael Ellerman to get Cell machines booting again.

 - Freescale updates from Scott: Highlights include BMan device tree
   nodes, an MSI erratum workaround, a couple minor performance
   improvements, config updates, and misc fixes/cleanup.

* tag 'powerpc-4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (196 commits)
  powerpc/powermac: Fix build error seen with powermac smp builds
  powerpc/pseries: Fix compile of memory hotplug without CONFIG_MEMORY_HOTREMOVE
  powerpc: Remove PPC32 code from pseries specific find_and_init_phbs()
  powerpc/cell: Fix iommu breakage caused by controller_ops change
  powerpc/eeh: Fix crash in eeh_add_device_early() on Cell
  powerpc/perf: Cap 64bit userspace backtraces to PERF_MAX_STACK_DEPTH
  powerpc/perf/hv-24x7: Fail 24x7 initcall if create_events_from_catalog() fails
  powerpc/pseries: Correct memory hotplug locking
  powerpc: Fix missing L2 cache size in /sys/devices/system/cpu
  powerpc: Add ppc64 hard lockup detector support
  oprofile: Disable oprofile NMI timer on ppc64
  powerpc/perf/hv-24x7: Add missing put_cpu_var()
  powerpc/perf/hv-24x7: Break up single_24x7_request
  powerpc/perf/hv-24x7: Define update_event_count()
  powerpc/perf/hv-24x7: Whitespace cleanup
  powerpc/perf/hv-24x7: Define add_event_to_24x7_request()
  powerpc/perf/hv-24x7: Rename hv_24x7_event_update
  powerpc/perf/hv-24x7: Move debug prints to separate function
  powerpc/perf/hv-24x7: Drop event_24x7_request()
  powerpc/perf/hv-24x7: Use pr_devel() to log message
  ...

Conflicts:
	tools/testing/selftests/powerpc/Makefile
	tools/testing/selftests/powerpc/tm/Makefile
2015-04-16 13:53:32 -05:00
Christoph Hellwig 16b8528d20 megaraid_sas: use raw_smp_processor_id()
We only want to steer the I/O completion towards a queue, but don't
actually access any per-CPU data, so the raw_ version is fine to use
and avoids the warnings when using smp_processor_id().

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Andy Lutomirski <luto@kernel.org>
Tested-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Sumit Saxena <sumit.saxena@avagotech.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-16 10:37:58 -07:00
Martin K. Petersen e557990e35 sd: Fix missing ATO tag check
3aec2f41a8 introduced a merge error where we would end up check for
sdkp instead of sdkp->ATO. Fix this so we register app tag capability
correctly.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: <stable@vger.kernel.org> # v3.17+
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-16 10:37:12 -07:00
Martin K. Petersen e727c42bd5 sd: Unregister integrity profile
The new integrity code did not correctly unregister the profile for SD
disks. Call blk_integrity_unregister() when we release a disk.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reported-by: Sagi Grimberg <sagig@dev.mellanox.co.il>
Tested-by: Sagi Grimberg <sagig@mellanox.com>
Cc: stable@vger.kernel.org # v3.17+
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-16 10:36:14 -07:00
Linus Torvalds 6c373ca893 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:

 1) Add BQL support to via-rhine, from Tino Reichardt.

 2) Integrate SWITCHDEV layer support into the DSA layer, so DSA drivers
    can support hw switch offloading.  From Floria Fainelli.

 3) Allow 'ip address' commands to initiate multicast group join/leave,
    from Madhu Challa.

 4) Many ipv4 FIB lookup optimizations from Alexander Duyck.

 5) Support EBPF in cls_bpf classifier and act_bpf action, from Daniel
    Borkmann.

 6) Remove the ugly compat support in ARP for ugly layers like ax25,
    rose, etc.  And use this to clean up the neigh layer, then use it to
    implement MPLS support.  All from Eric Biederman.

 7) Support L3 forwarding offloading in switches, from Scott Feldman.

 8) Collapse the LOCAL and MAIN ipv4 FIB tables when possible, to speed
    up route lookups even further.  From Alexander Duyck.

 9) Many improvements and bug fixes to the rhashtable implementation,
    from Herbert Xu and Thomas Graf.  In particular, in the case where
    an rhashtable user bulk adds a large number of items into an empty
    table, we expand the table much more sanely.

10) Don't make the tcp_metrics hash table per-namespace, from Eric
    Biederman.

11) Extend EBPF to access SKB fields, from Alexei Starovoitov.

12) Split out new connection request sockets so that they can be
    established in the main hash table.  Much less false sharing since
    hash lookups go direct to the request sockets instead of having to
    go first to the listener then to the request socks hashed
    underneath.  From Eric Dumazet.

13) Add async I/O support for crytpo AF_ALG sockets, from Tadeusz Struk.

14) Support stable privacy address generation for RFC7217 in IPV6.  From
    Hannes Frederic Sowa.

15) Hash network namespace into IP frag IDs, also from Hannes Frederic
    Sowa.

16) Convert PTP get/set methods to use 64-bit time, from Richard
    Cochran.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1816 commits)
  fm10k: Bump driver version to 0.15.2
  fm10k: corrected VF multicast update
  fm10k: mbx_update_max_size does not drop all oversized messages
  fm10k: reset head instead of calling update_max_size
  fm10k: renamed mbx_tx_dropped to mbx_tx_oversized
  fm10k: update xcast mode before synchronizing multicast addresses
  fm10k: start service timer on probe
  fm10k: fix function header comment
  fm10k: comment next_vf_mbx flow
  fm10k: don't handle mailbox events in iov_event path and always process mailbox
  fm10k: use separate workqueue for fm10k driver
  fm10k: Set PF queues to unlimited bandwidth during virtualization
  fm10k: expose tx_timeout_count as an ethtool stat
  fm10k: only increment tx_timeout_count in Tx hang path
  fm10k: remove extraneous "Reset interface" message
  fm10k: separate PF only stats so that VF does not display them
  fm10k: use hw->mac.max_queues for stats
  fm10k: only show actual queues, not the maximum in hardware
  fm10k: allow creation of VLAN on default vid
  fm10k: fix unused warnings
  ...
2015-04-15 09:00:47 -07:00
Wei Liu ccc9d90a9a xenbus_client: Extend interface to support multi-page ring
Originally Xen PV drivers only use single-page ring to pass along
information. This might limit the throughput between frontend and
backend.

The patch extends Xenbus driver to support multi-page ring, which in
general should improve throughput if ring is the bottleneck. Changes to
various frontend / backend to adapt to the new interface are also
included.

Affected Xen drivers:
* blkfront/back
* netfront/back
* pcifront/back
* scsifront/back
* vtpmfront

The interface is documented, as before, in xenbus_client.c.

Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Bob Liu <bob.liu@oracle.com>
Cc: Konrad Wilk <konrad.wilk@oracle.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-04-15 10:56:47 +01:00
Linus Torvalds ca2ec32658 Merge branch 'for-linus-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs update from Al Viro:
 "Part one:

   - struct filename-related cleanups

   - saner iov_iter_init() replacements (and switching the syscalls to
     use of those)

   - ntfs switch to ->write_iter() (Anton)

   - aio cleanups and splitting iocb into common and async parts
     (Christoph)

   - assorted fixes (me, bfields, Andrew Elble)

  There's a lot more, including the completion of switchover to
  ->{read,write}_iter(), d_inode/d_backing_inode annotations, f_flags
  race fixes, etc, but that goes after #for-davem merge.  David has
  pulled it, and once it's in I'll send the next vfs pull request"

* 'for-linus-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (35 commits)
  sg_start_req(): use import_iovec()
  sg_start_req(): make sure that there's not too many elements in iovec
  blk_rq_map_user(): use import_single_range()
  sg_io(): use import_iovec()
  process_vm_access: switch to {compat_,}import_iovec()
  switch keyctl_instantiate_key_common() to iov_iter
  switch {compat_,}do_readv_writev() to {compat_,}import_iovec()
  aio_setup_vectored_rw(): switch to {compat_,}import_iovec()
  vmsplice_to_user(): switch to import_iovec()
  kill aio_setup_single_vector()
  aio: simplify arguments of aio_setup_..._rw()
  aio: lift iov_iter_init() into aio_setup_..._rw()
  lift iov_iter into {compat_,}do_readv_writev()
  NFS: fix BUG() crash in notify_change() with patch to chown_common()
  dcache: return -ESTALE not -EBUSY on distributed fs race
  NTFS: Version 2.1.32 - Update file write from aio_write to write_iter.
  VFS: Add iov_iter_fault_in_multipages_readable()
  drop bogus check in file_open_root()
  switch security_inode_getattr() to struct path *
  constify tomoyo_realpath_from_path()
  ...
2015-04-14 15:31:03 -07:00
Christoph Hellwig 9ac8928e6a target: simplify the target template registration API
Instead of calling target_fabric_configfs_init() +
target_fabric_configfs_register() / target_fabric_configfs_deregister()
target_fabric_configfs_free() from every target driver, rewrite the API
so that we have simple register/unregister functions that operate on
a const operations vector.

This patch also fixes a memory leak in several target drivers. Several
target drivers namely called target_fabric_configfs_deregister()
without calling target_fabric_configfs_free().

A large part of this patch is based on earlier changes from
Bart Van Assche <bart.vanassche@sandisk.com>.

(v2: Add a new TF_CIT_SETUP_DRV macro so that the core configfs code
can declare attributes as either core only or for drivers)

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-04-14 12:28:41 -07:00
Linus Torvalds d0bbe0dd35 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree from Jiri Kosina:
 "Usual trivial tree updates.  Nothing outstanding -- mostly printk()
  and comment fixes and unused identifier removals"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
  goldfish: goldfish_tty_probe() is not using 'i' any more
  powerpc: Fix comment in smu.h
  qla2xxx: Fix printks in ql_log message
  lib: correct link to the original source for div64_u64
  si2168, tda10071, m88ds3103: Fix firmware wording
  usb: storage: Fix printk in isd200_log_config()
  qla2xxx: Fix printk in qla25xx_setup_mode
  init/main: fix reset_device comment
  ipwireless: missing assignment
  goldfish: remove unreachable line of code
  coredump: Fix do_coredump() comment
  stacktrace.h: remove duplicate declaration task_struct
  smpboot.h: Remove unused function prototype
  treewide: Fix typo in printk messages
  treewide: Fix typo in printk messages
  mod_devicetable: fix comment for match_flags
2015-04-14 09:50:27 -07:00
Linus Torvalds a1480a166d Merge branch 'for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata updates from Tejun Heo:

 - Hannes's patchset implements support for better error reporting
   introduced by the new ATA command spec.

 - the deperecated pci_ dma API usages have been replaced by dma_ ones.

 - a bunch of hardware specific updates and some cleanups.

* 'for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ata: remove deprecated use of pci api
  ahci: st: st_configure_oob must be called after IP is clocked.
  ahci: st: Update the ahci_st DT documentation
  ahci: st: Update the DT example for how to obtain the PHY.
  sata_dwc_460ex: indent an if statement
  libata: Add tracepoints
  libata-eh: Set 'information' field for autosense
  libata: Implement support for sense data reporting
  libata: Implement NCQ autosense
  libata: use status bit definitions in ata_dump_status()
  ide,ata: Rename ATA_IDX to ATA_SENSE
  libata: whitespace fixes in ata_to_sense_error()
  libata: whitespace cleanup in ata_get_cmd_descript()
  libata: use READ_LOG_DMA_EXT
  libata: remove ATA_FLAG_LOWTAG
  sata_dwc_460ex: re-use hsdev->dev instead of dwc_dev
  sata_dwc_460ex: move to generic DMA driver
  sata_dwc_460ex: join messages back
  sata: xgene: add ACPI support for APM X-Gene SATA ports
  ata: sata_mv: add proper definitions for LP_PHY_CTL register values
2015-04-13 16:42:16 -07:00
Linus Torvalds d700b05671 regulator: Updates for v4.1
Another release, another set of regulator updates.  Not much of it is
 showing up in the code yet but there's been a lot of discussion going on
 about how to enhance the regulator API to work better with modern SoCs
 which have a microcontroller sitting between Linux and the hardware.
 I'm hopeful that'll start to come through into mainline for v4.2 but
 it's not quite there for v4.1 - what we do have (along with the usual
 small updates is) is:
 
  - Work from Bjorn Andersson on refactoring the configuration of
    regulator loading interfaces to be useful for use with
    microcontrollers, the existing interfaces were never actually useful
    for anything as-is since nobody was willing to put enough data into
    public code.
  - A summary tree display in debugfs from Heiko Stübner.
  - Support for act6000 regulators.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJVK+w1AAoJECTWi3JdVIfQeg0H/2ckXZEQWH/yzAz7JgAoSmVr
 +y8pvfNLOyOVVulFI0QBOaCAoyJNXNPNqDrkYaTykMIwX4y+weoDqfH/LMiGpnXl
 D3aAgdLPSWLTUMteCs9KIHesnOdjKclZUjnbskJgnmeMCW23WcX9T1lBVoLBVdlo
 p+oe287rhEwF6j2t63aLwFv8QGpamgVQ/8mXXs8EK7L5E3OO262SwLaXRBAtWk30
 Eb68qXrbbkrDunEL6Hjggj5pFi93M4eNfQHpzVmjidvwz1g4JpLtWHW4XpQlXoHJ
 G2rlVwNFsyedT1MX2ByKhrIPu5kq5pt0/rjear34G3vuEnQm7vR3aW/38AOxffs=
 =t8gT
 -----END PGP SIGNATURE-----

Merge tag 'regulator-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "Another release, another set of regulator updates.  Not much of it is
  showing up in the code yet but there's been a lot of discussion going
  on about how to enhance the regulator API to work better with modern
  SoCs which have a microcontroller sitting between Linux and the
  hardware.

  I'm hopeful that'll start to come through into mainline for v4.2 but
  it's not quite there for v4.1 - what we do have (along with the usual
  small updates is) is:

   - work from Bjorn Andersson on refactoring the configuration of
     regulator loading interfaces to be useful for use with
     microcontrollers, the existing interfaces were never actually
     useful for anything as-is since nobody was willing to put enough
     data into public code.

   - a summary tree display in debugfs from Heiko Stübner.

   - support for act6000 regulators"

* tag 'regulator-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (34 commits)
  regulator: max8660: Handle empty regulator data
  regulator: output current-limit for all regulators in summary
  regulator: add a summary tree in debugfs
  regulator: qcom: Tidy up probe()
  regulator: qcom: Rework to single platform device
  regulator: qcom: Refactor of-parsing code
  regulator: qcom: Don't enable DRMS in driver
  regulator: max8660: fix assignment of pdata to data that becomes dead
  regulator: Defer lookup of supply to regulator_get
  mfd: max77693: Remove unused structures
  regulator: max77693: Let core parse DT and drop board files support
  regulator: Ensure unique regulator debugfs directory names
  regulator: stw481x: Remove unused fields from struct stw481x
  regulator: palmas: Add has_regen3 check for TPS659038
  regulator: constify of_device_id array
  regulator: fixes for regulator_set_optimum_mode name change
  regulator: Drop temporary regulator_set_optimum_mode wrapper
  usb: phy: phy-msm-usb: Rename regulator_set_optimum_mode
  usb: phy: ab8500-usb: Rename regulator_set_optimum_mode
  ufs: Rename of regulator_set_optimum_mode
  ...
2015-04-13 15:13:25 -07:00
Al Viro fdc81f45e9 sg_start_req(): use import_iovec()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-11 22:27:14 -04:00
Al Viro 451a2886b6 sg_start_req(): make sure that there's not too many elements in iovec
unfortunately, allowing an arbitrary 16bit value means a possibility of
overflow in the calculation of total number of pages in bio_map_user_iov() -
we rely on there being no more than PAGE_SIZE members of sum in the
first loop there.  If that sum wraps around, we end up allocating
too small array of pointers to pages and it's easy to overflow it in
the second loop.

X-Coverup: TINC (and there's no lumber cartel either)
Cc: stable@vger.kernel.org # way, way back
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-11 22:27:13 -04:00
Al Viro c0fec3a98b Merge branch 'iocb' into for-next 2015-04-11 22:24:41 -04:00
Linus Torvalds 3259b12ae1 SCSI fixes on 20150410
This is our remaining set of three fixes for 4.0: two oops fixes(one for cable
 pulls triggering oopses and the other be2iscsi specific) and one warn on in
 sysfs on multipath devices using enclosures.
 
 Signed-off-by: James Bottomley <JBottomley@Odin.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQEcBAABAgAGBQJVKFlCAAoJEDeqqVYsXL0MjOsH/j0DIeMOa7p5JdryKZNY+LY4
 HHfVgAK4T+bNZQUOCq/Dctn19CltuJGoDGkY2P4m1YG+mz8NLCm2aEAKp9efhho6
 6cLv0An/PlQhFuurbzo9BXsEb93ZENf6ng0WJZ3iOyqD9FA9X+0mDAfXDfJ4mwH3
 aGa0NE4bbqhNotWjpdFPIDqU2uwk4pV3M/BRx3JmeIIR2BtaWXkKxTq5tmLo9DDN
 22Seu/RJqV7O3WdphLLoN+615eCcroOru54DnQtKQ3/pQeC+6gyHcjkq02KjJ9D+
 wBNltUrtqzreDrgF2D6uaxT3NkQFFPlkzjD6Ma5tq5637sT9Tch8/UNTMzs5UgU=
 =AbF2
 -----END PGP SIGNATURE-----

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "This is our remaining set of three fixes for 4.0: two oops fixes(one
  for cable pulls triggering oopses and the other be2iscsi specific) and
  one warn on in sysfs on multipath devices using enclosures"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  Defer processing of REQ_PREEMPT requests for blocked devices
  be2iscsi: Fix kernel panic when device initialization fails
  enclosure: fix WARN_ON removing an adapter in multi-path devices
2015-04-10 17:41:47 -07:00
James Bottomley b9f28d8635 sd, mmc, virtio_blk, string_helpers: fix block size units
The current string_get_size() overflows when the device size goes over
2^64 bytes because the string helper routine computes the suffix from
the size in bytes.  However, the entirety of Linux thinks in terms of
blocks, not bytes, so this will artificially induce an overflow on very
large devices.  Fix this by making the function string_get_size() take
blocks and the block size instead of bytes.  This should allow us to
keep working until the current SCSI standard overflows.

Also fix virtio_blk and mmc (both of which were also artificially
multiplying by the block size to pass a byte side to string_get_size()).

The mathematics of this is pretty simple:  we're taking a product of
size in blocks (S) and block size (B) and trying to re-express this in
exponential form: S*B = R*N^E (where N, the exponent is either 1000 or
1024) and R < N.  Mathematically, S = RS*N^ES and B=RB*N^EB, so if RS*RB
< N it's easy to see that S*B = RS*RB*N^(ES+EB).  However, if RS*BS > N,
we can see that this can be re-expressed as RS*BS = R*N (where R =
RS*BS/N < N) so the whole exponent becomes R*N^(ES+EB+1)

[jejb: fix incorrect 32 bit do_div spotted by kbuild test robot <fengguang.wu@intel.com>]
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-10 16:27:48 -07:00
Mark Brown bea3672833 Merge remote-tracking branches 'regulator/topic/mode', 'regulator/topic/notifier', 'regulator/topic/palmas', 'regulator/topic/qcom' and 'regulator/topic/stw481x' into regulator-next 2015-04-10 19:16:03 +01:00
Yaniv Gardi cad2e03d86 ufs: add support to allow non standard behaviours (quirks)
Some implementation of UFS host controller HW might have some non-standard
behaviours (quirks) when compared to behaviour specified by UFSHCI
specification. This patch add support to allow specifying all such quirks
to standard UFS host controller driver so standard driver takes them into
account.

In this change a UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS is introduced,
where a minimum delay of 1ms is required before DME commands for
stability purposes.

Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org>
Reviewed-by: Gilad Broner <gbroner@codeaurora.org>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-10 08:53:56 -07:00
Yaniv Gardi bfdbe8ba21 ufs-qcom: save controller revision info in internal structure
Sometimes, specific information about the UFS controller revision is
required in order to determine certain operations or execute
controller dependent quirks.
In order to avoid reading the controller revision multiple times,
we simply read it once and save this information in internal structure.

Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org>
Reviewed-by: Gilad Broner <gbroner@codeaurora.org>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-10 08:52:58 -07:00
Himanshu Madhani a776e39416 qla2xxx: Update driver version to 8.07.00.18-k
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-10 08:43:17 -07:00
Sawan Chandak 718abbdca7 qla2xxx: Restore physical port WWPN only, when port down detected for FA-WWPN port.
For FA-WWPN is enabled port, if NPIV created on that port and,
if port link is brought down, then WWPN was restored from flash for both
physical and NPIV port. This will result in NPIV port and physical port
sharing same WWPN. Any application refreshing ports information  will
not be able to scan NPIV port because of this behavior. So while restoring WWPN,
only restore physical port WWPN.

Signed-off-by: Sawan Chandak <sawan.chandak@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-10 08:43:07 -07:00
Sawan Chandak ded6411fd8 qla2xxx: Fix virtual port configuration, when switch port is disabled/enabled.
On some vendor switches, when switch port is toggled (down /up),
then in some condition driver tries to configure virtual port,
before FW is actually in ready state to process any commands on wire.
At this time, configuring virtual port can fail. Add fix in driver
to make driver wait, for FW to be ready state before

Signed-off-by: Sawan Chandak <sawan.chandak@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-10 08:42:58 -07:00
Himanshu Madhani e8fb1250ba qla2xxx: Prevent multiple firmware dump collection for ISP27XX.
For ISP27XX, driver will capture new firmware dump even if there is
one already collected. Prevent this from happening by checking
fw_dumped flag.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-10 08:42:49 -07:00
Himanshu Madhani fd564b5d5d qla2xxx: Disable Interrupt handshake for ISP27XX.
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-10 08:42:38 -07:00
Himanshu Madhani d14e72fb85 qla2xxx: Add debugging info for MBX timeout.
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-10 08:42:30 -07:00
Andrew Vasquez 064135e01e qla2xxx: Add serdes read/write support for ISP27XX
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-10 08:42:18 -07:00
Himanshu Madhani 0137e59e62 qla2xxx: Add udev notification to save fw dump for ISP27XX
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-10 08:42:10 -07:00
Himanshu Madhani f4bf5e3c11 qla2xxx: Add message for sucessful FW dump collected for ISP27XX.
o Added message indicating firmware dump was sucessfully collected
  for ISP27XX.
o Improve logging to help debug firmware dump process for ISP27XX.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-10 08:42:01 -07:00
Sawan Chandak f1458cda44 qla2xxx: Add support to load firmware from file for ISP 26XX/27XX.
Signed-off-by: Sawan Chandak <sawan.chandak@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-10 08:41:50 -07:00
Nigel Kirkland b21ba319dc qla2xxx: Fix beacon blink for ISP27XX.
Signed-off-by: Nigel Kirkland <nigel.kirkland@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-10 08:41:40 -07:00
Chad Dupuis 334614912b qla2xxx: Increase the wait time for firmware to be ready for P3P.
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-10 08:41:30 -07:00
Himanshu Madhani 6cbfb1ebbb qla2xxx: Fix crash due to wrong casting of reg for ISP27XX.
[Bart: additional sparse warning caused by this patch]
[jejb: fix sparse warning]
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Cc: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-10 08:40:25 -07:00
Himanshu Madhani dd83cb2c16 qla2xxx: Fix warnings reported by static checker.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-10 08:32:15 -07:00
James Smart d09c78f8f3 lpfc: Update version to 10.5.0.0 for upstream patch set
Update version  to 10.5.0.0 for upstream patch set

Signed-off-by: Dick Kennedy <dick.kennedy@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-10 07:50:54 -07:00
James Smart f25e8e79bd lpfc: Update copyright to 2015
Update copyright to 2015

Signed-off-by: Dick Kennedy <dick.kennedy@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-10 07:50:42 -07:00
James Smart 4fbdf9cbcc lpfc: Fix for lun discovery issue with saturn adapter.
FCP_CMD payload was not always properly initialized on SLI-3 devices.

Signed-off-by: Dick Kennedy <dick.kennedy@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-10 07:50:29 -07:00