There is a race with multi-threaded applications between context switch and
pagetable upgrade. In switch_mm() a new user_asce is built from mm->pgd and
mm->context.asce_bits, w/o holding any locks. A concurrent mmap with a
pagetable upgrade on another thread in crst_table_upgrade() could already
have set new asce_bits, but not yet the new mm->pgd. This would result in a
corrupt user_asce in switch_mm(), and eventually in a kernel panic from a
translation exception.
Fix this by storing the complete asce instead of just the asce_bits, which
can then be read atomically from switch_mm(), so that it either sees the
old value or the new value, but no mixture. Both cases are OK. Having the
old value would result in a page fault on access to the higher level memory,
but the fault handler would see the new mm->pgd, if it was a valid access
after the mmap on the other thread has completed. So as worst-case scenario
we would have a page fault loop for the racing thread until the next time
slice.
Also remove dead code and simplify the upgrade/downgrade path, there are no
upgrades from 2 levels, and only downgrades from 3 levels for compat tasks.
There are also no concurrent upgrades, because the mmap_sem is held with
down_write() in do_mmap, so the flush and table checks during upgrade can
be removed.
Reported-by: Michael Munday <munday@ca.ibm.com>
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
After a failure during registration of the dma_table (because of the
function being in error state) we free its memory but don't reset the
associated pointer to zero.
When we then receive a notification from firmware (about the function
being in error state) we'll try to walk and free the dma_table again.
Fix this by resetting the dma_table pointer. In addition to that make
sure that we free the iommu_bitmap when appropriate.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Pull crypto fixes from Herbert Xu:
"This fixes the following issues:
- Incorrect output buffer size calculation in rsa-pkcs1pad
- Uninitialised padding bytes on exported state in ccp driver
- Potentially freed pointer used on completion callback in sha1-mb"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: ccp - Prevent information leakage on export
crypto: sha1-mb - use corrcet pointer while completing jobs
crypto: rsa-pkcs1pad - fix dst len
Since of_get_cpu_node() increments refcount, the node should be put.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
On all shmobile ARM SoCs, loop-based delays may complete early, which
can be after only 1/3 (Cortex A9) or 1/2 (Cortex A7 or A15) of the
minimum required time.
This is caused by calculating preset_lpj based on incorrect assumptions
about the number of clock cycles per loop:
- All of Cortex A7, A9, and A15 run __loop_delay() at 1 loop per
CPU clock cycle,
- As of commit 11d4bb1bd0 ("ARM: 7907/1: lib: delay-loop: Add
align directive to fix BogoMIPS calculation"), Cortex A8 runs
__loop_delay() at 1 loop per 2 instead of 3 CPU clock cycles.
On SoCs with Cortex A7 and/or A15 CPU cores, this went unnoticed, as
delays use the ARM arch timer if available. R-Car Gen2 doesn't work if
the arch timer is disabled. However, APE6 can be used without the arch
timer.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This reverts commit 19417bd9c5 ("ARM: dts: porter: Enable SCIF_CLK
frequency and pins") as according to
http://elinux.org/File:R-CarM2-KOELSCH_PORTER-B_PORTER_C_Comparison.pdf
the external oscillator for SCIF_CLK is not mounted on the porter boards.
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
clk_get on a disabled clock node will return EPROBE_DEFER, which can
cause drivers to be deferred forever if such clocks are referenced in
their clocks property.
Update the various disabled external clock nodes to default to a
frequency of 0, but don't disable them to prevent this.
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Commit b8c9592 "ARM: 8318/1: treat CPU feature register fields as signed
quantities" introduced helper to extract signed quantities of 4-bit
blocks. However, with a current code feature with value 0b1000 isn't
rejected as negative. So fix the "if" condition.
Reported-by: Jonathan Brawn <Jon.Brawn@arm.com>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Commit b8c9592 "ARM: 8318/1: treat CPU feature register fields as signed
quantities" accidentally altered cpuid register used to demote
HWCAP_SWP.
ARM ARM says that SyncPrim_instrs bits in ID_ISAR3 should be used with
SynchPrim_instrs_frac from ID_ISAR4. So, follow this rule.
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Pull s390 fixes from Martin Schwidefsky:
"A couple of bug fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: add CPU_BIG_ENDIAN config option
s390/spinlock: avoid yield to non existent cpu
s390/dcssblk: fix possible deadlock in remove vs. per-device attributes
s390/seccomp: include generic seccomp header file
s390/pci: add extra padding to function measurement block
s390/scm_blk: fix deadlock for requests != REQ_TYPE_FS
In head.S, the str_l macro, which takes a source register, a symbol name
and a temp register, is used to store a status value to the variable
__early_cpu_boot_status. Subsequently, the value of the temp register is
reused to invalidate any cachelines covering this variable.
However, since str_l resolves to
adrp \tmp, \sym
str \src, [\tmp, :lo12:\sym]
the temp register never actually holds the address of the variable but
only of the 4 KB window that covers it, and reusing it leads to the
wrong cacheline being invalidated. So instead, take the address
explicitly before doing the store, and reuse that value to perform
the cache invalidation.
Fixes: bb9052744f ("arm64: Handle early CPU boot failures")
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Suzuki K Poulose <Suzuki.Poulose@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
We need to update the user TM feature bits (PPC_FEATURE2_HTM and
PPC_FEATURE2_HTM) to mirror what we do with the kernel TM feature
bit.
At the moment, if firmware reports TM is not available we turn off
the kernel TM feature bit but leave the userspace ones on. Userspace
thinks it can execute TM instructions and it dies trying.
This (together with a QEMU patch) fixes PR KVM, which doesn't currently
support TM.
Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: stable@vger.kernel.org
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
scan_features() updates cpu_user_features but not cpu_user_features2.
Amongst other things, cpu_user_features2 contains the user TM feature
bits which we must keep in sync with the kernel TM feature bit.
Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: stable@vger.kernel.org
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The REAL_LE feature entry in the ibm_pa_feature struct is missing an MMU
feature value, meaning all the remaining elements initialise the wrong
values.
This means instead of checking for byte 5, bit 0, we check for byte 0,
bit 0, and then we incorrectly set the CPU feature bit as well as MMU
feature bit 1 and CPU user feature bits 0 and 2 (5).
Checking byte 0 bit 0 (IBM numbering), means we're looking at the
"Memory Management Unit (MMU)" feature - ie. does the CPU have an MMU.
In practice that bit is set on all platforms which have the property.
This means we set CPU_FTR_REAL_LE always. In practice that seems not to
matter because all the modern cpus which have this property also
implement REAL_LE, and we've never needed to disable it.
We're also incorrectly setting MMU feature bit 1, which is:
#define MMU_FTR_TYPE_8xx 0x00000002
Luckily the only place that looks for MMU_FTR_TYPE_8xx is in Book3E
code, which can't run on the same cpus as scan_features(). So this also
doesn't matter in practice.
Finally in the CPU user feature mask, we're setting bits 0 and 2. Bit 2
is not currently used, and bit 0 is:
#define PPC_FEATURE_PPC_LE 0x00000001
Which says the CPU supports the old style "PPC Little Endian" mode.
Again this should be harmless in practice as no 64-bit CPUs implement
that mode.
Fix the code by adding the missing initialisation of the MMU feature.
Also add a comment marking CPU user feature bit 2 (0x4) as reserved. It
would be unsafe to start using it as old kernels incorrectly set it.
Fixes: 44ae3ab335 ("powerpc: Free up some CPU feature bits by moving out MMU-related features")
Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: stable@vger.kernel.org
[mpe: Flesh out changelog, add comment reserving 0x4]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Generation2 instances don't support reporting the NMI status on port 0x61,
read from there returns 'ff' and we end up reporting nonsensical PCI
error (as there is no PCI bus in these instances) on all NMIs:
NMI: PCI system error (SERR) for reason ff on CPU 0.
Dazed and confused, but trying to continue
Fix the issue by overriding x86_platform.get_nmi_reason. Use 'booted on
EFI' flag to detect Gen2 instances.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Cathy Avery <cavery@redhat.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: devel@linuxdriverproject.org
Link: http://lkml.kernel.org/r/1460728232-31433-1-git-send-email-vkuznets@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull parisc ftrace fixes from Helge Deller:
"This is (most likely) the last pull request for v4.6 for the parisc
architecture.
It fixes the FTRACE feature for parisc, which is horribly broken since
quite some time and doesn't even compile. This patch just fixes the
bare minimum (it actually removes more lines than it adds), so that
the function tracer works again on 32- and 64bit kernels.
I've queued up additional patches on top of this patch which e.g. add
the syscall tracer, but those have to wait for the merge window for
v4.7."
* 'parisc-4.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix ftrace function tracer
Make sure that s390 appears to be a big endian machine by defining
this config option.
Without this s390 appears to be little endian as seen by e.g. the
recordmount script: "perl ./scripts/recordmcount.pl "s390" "little"
"64""
This has no practical impact within the script since the endian
variable is only evaluated for mips. However there are already a
couple of common code places which evaluate this config option. None
of them is relevant for s390 currently though.
To avoid any issues in the future (and fix the recordmcount oddity)
add the new config option.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
arch_spin_lock_wait_flags() checks if a spinlock is not held before
trying a compare and swap instruction. If the lock is unlocked it
tries the compare and swap instruction, however if a different cpu
grabbed the lock in the meantime the instruction will fail as
expected.
Subsequently the arch_spin_lock_wait_flags() incorrectly tries to
figure out if the cpu that holds the lock is running. However it is
using the wrong cpu number for this (-1) and then will also yield the
current cpu to the wrong cpu.
Fix this by adding a missing continue statement.
Fixes: 470ada6b1a ("s390/spinlock: refactor arch_spin_lock_wait[_flags]")
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
In sha_complete_job, incorrect mcryptd_hash_request_ctx pointer is used
when check and complete other jobs. If the memory of first completed req
is freed, while still completing other jobs in the func, kernel will
crash since NULL pointer is assigned to RIP.
Cc: <stable@vger.kernel.org>
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Acked-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit 19e6e5e539 ("ARM: 8547/1: dma-mapping: store buffer
information") allocates a structure meant for internal buffer management
with the GFP flags of the buffer itself. This can trigger the following
safeguard in the slab/slub allocator:
if (unlikely(flags & GFP_SLAB_BUG_MASK)) {
pr_emerg("gfp: %un", flags & GFP_SLAB_BUG_MASK);
BUG();
}
Fix this by filtering the flags that make the slab allocator unhappy.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Pull x86 fixes from Ingo Molnar:
"Misc fixes: a binutils fix, an lguest fix, an mcelog fix and a missing
documentation fix"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Avoid using object after free in genpool
lguest, x86/entry/32: Fix handling of guest syscalls using interrupt gates
x86/build: Build compressed x86 kernels as PIE
x86/mm/pkeys: Add missing Documentation
This reverts commit c4004b02f8.
Sadly, my hope that nobody would actually use the special kernel entries
in /proc/iomem were dashed by kexec. Which reads /proc/iomem explicitly
to find the kernel base address. Nasty.
Anyway, that means we can't do the sane and simple thing and just remove
the entries, and we'll instead have to mask them out based on permissions.
Reported-by: Zhengyu Zhang <zhezhang@redhat.com>
Reported-by: Dave Young <dyoung@redhat.com>
Reported-by: Freeman Zhang <freeman.zhang1992@gmail.com>
Reported-by: Emrah Demir <ed@abdsec.com>
Reported-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix the FTRACE function tracer for 32- and 64-bit kernel.
The former code was horribly broken.
Reimplement most coding in assembly and utilize optimizations, e.g. put
mcount() and ftrace_stub() into one L1 cacheline.
Signed-off-by: Helge Deller <deller@gmx.de>
Depending on timing during the resume path from off mode on 36xx, we may
see external aborts. These seem to be caused by the following:
- OMAP3 Advisory 1.62 "MPU Cannot Exit from Standby" says we need to
disable intc autoidle before WFI
- DM3730 Advisory 1.106 "MPU Leaves MSTANDBY State Before IDLEREQ of
Interrupt Controller is Released" says we need to wait before
accessing intc
omap3_intc_resume_idle restores the intc autoidle for all resume paths,
however in the resume path from off mode only it is also being restored
by omap_intc_restore_context before this call to omap3_intc_resume_idle
happens. The second restore of the intc autoidle in this path is what
appears to be causing the external abort so for the off mode resume path
let's rely on omap_intc_restore_context to restore intc autoidle, and
for all other paths let omap3_intc_resume_idle handle it as it is now.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
introduced by me, and one caused by changes elsewhere.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJXDaFFAAoJELcQ+SIFb8HaqYQH/2HE4XRXv7tYULlyTiQENFNc
m7v8R6D9KLWYlJzrDl5UGfbRDnGHzVFpyzuyJrsEhpymTtoeWif3/96H/VTWKrPq
h1obfuVH/p8bfodnTnsWqEJa/BdmAvyaeQZ5Ec8ibfYYAOLiUuKDwFI46kZ22m2r
m13dYoNw0F+rjYjAtlHjX3M2Sq5DvKHLN/STONRtTXxE3FVHOGCQ6SGuasd9JkEr
rTGRVE2Rkj7Q3BNCOK3eu0+LFkxJFE41nVdk2d/iRRyt9uwXveN8Yk5V/kX/oINk
1zXfGmtpOiIMs2zH5oNrHwXqWBfEzEXH7XNJOoGVrAzg/6JxMWbQXbDwMyUPjCA=
=qnfN
-----END PGP SIGNATURE-----
Merge tag 'sh-fixes-4.6-rc1' of git://git.libc.org/linux-sh
Pull arch/sh fixes from Rich Felker:
"Fixes for two arch/sh build regressions that appeared in 4.6-rc1, one
introduced by me, and one caused by changes elsewhere"
* tag 'sh-fixes-4.6-rc1' of git://git.libc.org/linux-sh:
sh: fix function signature of cpu_coregroup_mask to match pointer type
sh: fix smp-shx3 build regression from removal of arch localtimer
USB1 controller is hardwired to be used as Host only port so
we don't need to check ID pin state and can get rid of extcon_usb1.
This also reduces USB1 controller's and so eSATA power's dependency
with EXTCON. This fixes eSATA port with multi_v7_defconfig.
Cc: Franklin S Cooper Jr. <fcooper@ti.com>
Cc: Vagrant Cascadian <vagrant@debian.org>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Tested-by: Franklin S Cooper Jr. <fcooper@ti.com>
[tony@atomide.com: updated to describe what it fixes]
Signed-off-by: Tony Lindgren <tony@atomide.com>
This patch updates the GPMC's DT DMA property to reflect the updated eDMA
bindings.
Fixes: cce1ee0001 ("ARM: DTS: am437x: Use the new DT bindings for the eDMA3")
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This patch updates the GPMC's DT DMA property to reflect the updated eDMA
bindings.
Fixes: b5e5090660 ("ARM: DTS: am33xx: Use the new DT bindings for the eDMA3")
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
For DRA7xx platforms, add a workaround for missed timer interrupts
that appears to be due to an integration bug (erratum i874)
Basic build, boot, and PM test logs are available here:
http://www.pwsan.com/omap/testlogs/omap-fixes-b-for-v4.6-rc/20160413020850/
(The DRA7xx board here has not yet been added into the testbed.)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=6XvG
-----END PGP SIGNATURE-----
Merge tag 'for-v4.6-rc/omap-fixes-b' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into omap-for-v4.6/fixes
ARM: OMAP2+: clockdomain: another fix for v4.6-rc
For DRA7xx platforms, add a workaround for missed timer interrupts
that appears to be due to an integration bug (erratum i874)
Basic build, boot, and PM test logs are available here:
http://www.pwsan.com/omap/testlogs/omap-fixes-b-for-v4.6-rc/20160413020850/
(The DRA7xx board here has not yet been added into the testbed.)
Pull m68knommu/coldfire fix from Greg Ungerer:
"Only a single change that removes a local arch specific gpio bus sysfs
device that now clashes with the generic gpio bus sysfs device
interface"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k/gpio: remove arch specific sysfs bus device
A batch of fixes for -rc4, for various platforms. Nothing really
substantial and worth pointing out in particular; small fixes for various
bugs, see shortlog for details.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=5GPE
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"A batch of fixes for -rc4, for various platforms.
Nothing really substantial and worth pointing out in particular; small
fixes for various bugs, see shortlog for details"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: sa1100: remove references to the defunct handhelds.org
bus: uniphier-system-bus: fix condition of overlap check
ARM: uniphier: drop weird sizeof()
ARM: dts: am335x-baltos-ir5221: fix cpsw_emac0 link type
ARM: OMAP: Correct interrupt type for ARM TWD
ARM: DRA722: Add ID detect for Silicon Rev 2.0
ARM: dts: am43xx: fix edma memcpy channel allocation
ARM: dts: AM43x-epos: Fix clk parent for synctimer
ARM: OMAP2: Fix up interconnect barrier initialization for DRA7
documentation: Fix pinctrl documentation for Meson8 / Meson8b
ARM: dts: amlogic: Split pinctrl device for Meson8 / Meson8b
ARM: mvebu: Correct unit address for linksys
bus: mvebu-mbus: use %pa to print phys_addr_t
arm64: dts: vulcan: Update PCI ranges
ARM: u8500_defconfig: turn on the Synaptics RMI4 driver
ARM: pxa: fix the number of DMA requestor lines
ARM: OMAP2+: hwmod: Fix updating of sysconfig register
ARM: OMAP2+: Use srst_udelay for USB on dm814x
- Wrong indentation in the PMU code from the merge window
- A long-time bug occuring with running ntpd on the host, candidate for stable
- Properly handle (and warn about) the unsupported configuration of running on
systems with less than 40 bits of PA space
- More fixes to the PM and hotplug notifier stuff from the merge window
x86:
- leak of guest xcr0 (typically shows up as SIGILL)
- new maintainer (who is sending the pull request too)
- fix for merge window regression
- fix for guest CPUID
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJXCrBeAAoJEL/70l94x66DHlYIAJseQjhyXMm3J8vkZ1qoPjiM
IWUV3BoSDpMjIXZdiouDShCBwBE1zDoFCXzkGO8FGNpYTy/4WQ2DF+fQr8OFveOv
bpLJI6iYpCESh5ihhp8UDTD9oY4ZAxyPfNUx06Rirze2ijDr6rWkM16bKgdIlMpa
rzGUQWodZO0odCWVMAXSe08uistvqZ71iacpAIJQJrx3MJcq1u2+Y2daZO3df1R6
GnWxY5SK2ZvrNEwjQPXAYgCPGaJKEVUbr9BvWFoQ2O+qGA4TPv4jrOsAQ7bRh4Rr
SGOH465Qdj2EA7eJrP2/NAlD5N7H7RWkiLiyIGF4OTS6wJHU8jdnOLbYPx0VmQg=
=1OKc
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Radim Krčmář:
"ARM fixes:
- Wrong indentation in the PMU code from the merge window
- A long-time bug occuring with running ntpd on the host, candidate
for stable
- Properly handle (and warn about) the unsupported configuration of
running on systems with less than 40 bits of PA space
- More fixes to the PM and hotplug notifier stuff from the merge
window
x86:
- leak of guest xcr0 (typically shows up as SIGILL)
- new maintainer (who is sending the pull request too)
- fix for merge window regression
- fix for guest CPUID"
Paolo Bonzini points out:
"For the record, this tag is signed by me because I prepared the pull
request. Further pull requests for 4.6 will be signed and sent out by
Radim directly"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: mask CPUID(0xD,0x1).EAX against host value
kvm: x86: do not leak guest xcr0 into host interrupt handlers
KVM: MMU: fix permission_fault()
KVM: new maintainer on the block
arm64: KVM: unregister notifiers in hyp mode teardown path
arm64: KVM: Warn when PARange is less than 40 bits
KVM: arm/arm64: Handle forward time correction gracefully
arm64: KVM: Add braces to multi-line if statement in virtual PMU code
When we loop over all queued machine check error records to pass them
to the registered notifiers we use llist_for_each_entry(). But the loop
calls gen_pool_free() for the entry in the body of the loop - and then
the iterator looks at node->next after the free.
Use llist_for_each_entry_safe() instead.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Cc: Gong Chen <gong.chen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/0205920@agluck-desk.sc.intel.com
Link: http://lkml.kernel.org/r/1459929916-12852-4-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
With commit 7b91369b46 ("mmc: sdhci: Set DMA mask when adding host")
DMA access got disabled for device drivers with zero DMA mask property.
sdhci-esdhc-imx got blocked from DMA access by this. Hence: initialize
the DMA mask to enable access again.
Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
- fix USB adress register for Linksys Armada 388 based boards
- fix build warning in mvebu-mbus
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlcGmgAACgkQCwYYjhRyO9WmLACgkLHkRxw3Xmp5/g3tSgBzh06A
Qb4An2adegesOnsQzbVwWeaCaJxdEbk/
=sMxU
-----END PGP SIGNATURE-----
Merge tag 'mvebu-fixes-4.6-1' of git://git.infradead.org/linux-mvebu into fixes
mvebu fixes for 4.6 (part 1)
- fix USB adress register for Linksys Armada 388 based boards
- fix build warning in mvebu-mbus
* tag 'mvebu-fixes-4.6-1' of git://git.infradead.org/linux-mvebu:
ARM: mvebu: Correct unit address for linksys
bus: mvebu-mbus: use %pa to print phys_addr_t
Signed-off-by: Olof Johansson <olof@lixom.net>
The website handhelds.org has been down for a long time and is
likely never coming back online.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
There is only a single fix for dma requestor lines initial
setup, triggered by dmaengine previous fix.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=NaUe
-----END PGP SIGNATURE-----
Merge tag 'pxa-fixes-v4.6' of https://github.com/rjarzmik/linux into fixes
ARM: pxa: fixes for v4.6
There is only a single fix for dma requestor lines initial
setup, triggered by dmaengine previous fix.
* tag 'pxa-fixes-v4.6' of https://github.com/rjarzmik/linux:
ARM: pxa: fix the number of DMA requestor lines
Signed-off-by: Olof Johansson <olof@lixom.net>
SoCs with few board fixes and a fix for a long time hwmod bug:
- Fix cpsw_emac0 link type for baltos-ir5221
- Fix interrupt type for TWD
- Fix edma memcpy channel allocation for am43x
- Fix am43x-epos sycntimer32k by using the correct assigned clock
- Fix interconnect barrier for dra7
- Fix a long time hwmod bug for updating sysconfig register properly
- Fix flakey booting on dm814x where USB reset needs a delay
And there is one minor change that is not strictly a fix, but is
good to have for proper hardware detection:
- Detect dra7 silicon revision 2.0 properly
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=5fhs
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.6/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Fixes for omaps against v4.6-rc1. Mostly minor fixes for the newer
SoCs with few board fixes and a fix for a long time hwmod bug:
- Fix cpsw_emac0 link type for baltos-ir5221
- Fix interrupt type for TWD
- Fix edma memcpy channel allocation for am43x
- Fix am43x-epos sycntimer32k by using the correct assigned clock
- Fix interconnect barrier for dra7
- Fix a long time hwmod bug for updating sysconfig register properly
- Fix flakey booting on dm814x where USB reset needs a delay
And there is one minor change that is not strictly a fix, but is
good to have for proper hardware detection:
- Detect dra7 silicon revision 2.0 properly
* tag 'omap-for-v4.6/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am335x-baltos-ir5221: fix cpsw_emac0 link type
ARM: OMAP: Correct interrupt type for ARM TWD
ARM: DRA722: Add ID detect for Silicon Rev 2.0
ARM: dts: am43xx: fix edma memcpy channel allocation
ARM: dts: AM43x-epos: Fix clk parent for synctimer
ARM: OMAP2: Fix up interconnect barrier initialization for DRA7
ARM: OMAP2+: hwmod: Fix updating of sysconfig register
ARM: OMAP2+: Use srst_udelay for USB on dm814x
Signed-off-by: Olof Johansson <olof@lixom.net>
My intention was to ioremap a 4-byte register. Coincidentally enough,
sizeof(SZ_4) equals to SZ_4, but this code is weird anyway.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Pull m68k update from Geert Uytterhoeven.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k/defconfig: Update defconfigs for v4.6-rc2
m68k: Wire up preadv2 and pwritev2
- Kconfig splat due to pcie rework
- Making ethernet work again on axs103
- Provide fb_pgprotect() for future Video driver integration
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=O4Nt
-----END PGP SIGNATURE-----
Merge tag 'arc-4.6-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
- fix Kconfig splat due to pcie rework
- make ethernet work again on axs103
- provide fb_pgprotect() for future video driver integration
* tag 'arc-4.6-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: [plat-axs103] Enable loop block devices
Revert "ARC: [plat-axs10x] add Ethernet PHY description in .dts"
arc: Add our own implementation of fb_pgprotect()
ARC: Don't source drivers/pci/pcie/Kconfig ourselves
The ColdFire architecture specific gpio support code registers a sysfs
bus device named "gpio". This clashes with the new generic API device
added in commit 3c702e99 ("gpio: add a userspace chardev ABI for GPIOs").
The old ColdFire sysfs gpio device was never used for anything specific,
and no links or other nodes were created under it. The new API sysfs gpio
device has all the same default sysfs links (device, drivers, etc) and
they are properly populated.
Remove the old ColdFire sysfs gpio registration.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Pull ARM fixes from Russell King:
"A couple of small fixes, and wiring up the new syscalls which appeared
during the merge window"
* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
ARM: 8550/1: protect idiv patching against undefined gcc behavior
ARM: wire up preadv2 and pwritev2 syscalls
ARM: SMP enable of cache maintanence broadcast
This ensures that the guest doesn't see XSAVE extensions
(e.g. xgetbv1 or xsavec) that the host lacks.
Cc: stable@vger.kernel.org
Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
An interrupt handler that uses the fpu can kill a KVM VM, if it runs
under the following conditions:
- the guest's xcr0 register is loaded on the cpu
- the guest's fpu context is not loaded
- the host is using eagerfpu
Note that the guest's xcr0 register and fpu context are not loaded as
part of the atomic world switch into "guest mode". They are loaded by
KVM while the cpu is still in "host mode".
Usage of the fpu in interrupt context is gated by irq_fpu_usable(). The
interrupt handler will look something like this:
if (irq_fpu_usable()) {
kernel_fpu_begin();
[... code that uses the fpu ...]
kernel_fpu_end();
}
As long as the guest's fpu is not loaded and the host is using eager
fpu, irq_fpu_usable() returns true (interrupted_kernel_fpu_idle()
returns true). The interrupt handler proceeds to use the fpu with
the guest's xcr0 live.
kernel_fpu_begin() saves the current fpu context. If this uses
XSAVE[OPT], it may leave the xsave area in an undesirable state.
According to the SDM, during XSAVE bit i of XSTATE_BV is not modified
if bit i is 0 in xcr0. So it's possible that XSTATE_BV[i] == 1 and
xcr0[i] == 0 following an XSAVE.
kernel_fpu_end() restores the fpu context. Now if any bit i in
XSTATE_BV == 1 while xcr0[i] == 0, XRSTOR generates a #GP. The
fault is trapped and SIGSEGV is delivered to the current process.
Only pre-4.2 kernels appear to be vulnerable to this sequence of
events. Commit 653f52c ("kvm,x86: load guest FPU context more eagerly")
from 4.2 forces the guest's fpu to always be loaded on eagerfpu hosts.
This patch fixes the bug by keeping the host's xcr0 loaded outside
of the interrupts-disabled region where KVM switches into guest mode.
Cc: stable@vger.kernel.org
Suggested-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: David Matlack <dmatlack@google.com>
[Move load after goto cancel_injection. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm-unit-tests complained about the PFEC is not set properly, e.g,:
test pte.rw pte.d pte.nx pde.p pde.rw pde.pse user fetch: FAIL: error code 15
expected 5
Dump mapping: address: 0x123400000000
------L4: 3e95007
------L3: 3e96007
------L2: 2000083
It's caused by the reason that PFEC returned to guest is copied from the
PFEC triggered by shadow page table
This patch fixes it and makes the logic of updating errcode more clean
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
[Do not assume pfec.p=1. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Errata Title:
i874: TIMER5/6/7/8 interrupts not propagated
Description:
When TIMER5, TIMER6, TIMER7, or TIMER8 clocks are enabled
(CM_IPU_TIMER5/6/7/8_CLKCTRL[0:1]MODULEMODE=0x2:ENABLE) and the CD-IPU
is in HW_AUTO mode (CM_IPU_CLKSTCTRL[0:1]CLKTRCTRL=0x3:HW_AUTO) the
corresponding TIMER will continue counting, but enabled interrupts
will not be propagated to the destinations (MPU, DSP, etc) in the
SoC until the TIMER registers are accessed from the CPUs (MPU, DSP
etc.). This can result in missed timer interrupts.
Workaround:
In order for TIMER5/6/7/8 interrupts to be propagated and serviced
correctly the CD_IPU domain should be set to SW_WKUP mode
(CM_IPU_CLKSTCTRL[0:1]CLKTRCTRL=0x2:SW_WKUP).
The above workaround is achieved by switching the IPU clockdomain
flags from HWSUP_SWSUP to SWSUP only.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Pull parisc fixes from Helge Deller:
"Since commit 0de798584b ("parisc: Use generic extable search and
sort routines") module loading is boken on parisc, because the parisc
module loader wasn't prepared for the new R_PARISC_PCREL32 relocations.
In addition, due to that breakage, Mikulas Patocka noticed that
handling exceptions from modules probably never worked on parisc. It
was just masked by the fact that exceptions from modules don't happen
during normal use.
This patch series fixes those issues and survives the tests of the
lib/test_user_copy kernel module test. Some patches are tagged for
stable"
* 'parisc-4.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Update comment regarding relative extable support
parisc: Unbreak handling exceptions from kernel modules
parisc: Fix kernel crash with reversed copy_from_user()
parisc: Avoid function pointers for kernel exception routines
parisc: Handle R_PARISC_PCREL32 relocations in kernel modules
- intel_pstate fixes for two issues exposed by the recent switch
over from using timers and for one issue introduced during the
4.4 cycle plus new comments describing data structures used by
the driver (Rafael Wysocki, Srinivas Pandruvada).
- intel_idle fixes related to CPU offline/online (Richard Cochran).
- intel_idle support (new CPU IDs and state definitions mostly) for
Skylake-X and Kabylake processors (Len Brown).
- PCC mailbox driver fix for an out-of-bounds memory access that
may cause the kernel to panic() (Shanker Donthineni).
- New (missing) CPU ID for one apparently overlooked Haswell model
in the Intel RAPL power capping driver (Srinivas Pandruvada).
- Fix for the PM core's wakeup IRQs framework to make it work after
wakeup settings reconfiguration from sysfs (Grygorii Strashko).
- Runtime PM documentation update to make it describe what needs
to be done during device removal more precisely (Krzysztof
Kozlowski).
- Stale comment removal cleanup in the cpufreq-dt driver (Viresh
Kumar).
- turbostat utility fixes and support for Broxton, Skylake-X
and Kabylake processors (Len Brown).
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=f4MM
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-4.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI fixes from Rafael Wysocki:
"Fixes for some issues discovered after recent changes and for some
that have just been found lately regardless of those changes
(intel_pstate, intel_idle, PM core, mailbox/pcc, turbostat) plus
support for some new CPU models (intel_idle, Intel RAPL driver,
turbostat) and documentation updates (intel_pstate, PM core).
Specifics:
- intel_pstate fixes for two issues exposed by the recent switch over
from using timers and for one issue introduced during the 4.4 cycle
plus new comments describing data structures used by the driver
(Rafael Wysocki, Srinivas Pandruvada).
- intel_idle fixes related to CPU offline/online (Richard Cochran).
- intel_idle support (new CPU IDs and state definitions mostly) for
Skylake-X and Kabylake processors (Len Brown).
- PCC mailbox driver fix for an out-of-bounds memory access that may
cause the kernel to panic() (Shanker Donthineni).
- New (missing) CPU ID for one apparently overlooked Haswell model in
the Intel RAPL power capping driver (Srinivas Pandruvada).
- Fix for the PM core's wakeup IRQs framework to make it work after
wakeup settings reconfiguration from sysfs (Grygorii Strashko).
- Runtime PM documentation update to make it describe what needs to
be done during device removal more precisely (Krzysztof Kozlowski).
- Stale comment removal cleanup in the cpufreq-dt driver (Viresh
Kumar).
- turbostat utility fixes and support for Broxton, Skylake-X and
Kabylake processors (Len Brown)"
* tag 'pm+acpi-4.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (28 commits)
PM / wakeirq: fix wakeirq setting after wakup re-configuration from sysfs
tools/power turbostat: work around RC6 counter wrap
tools/power turbostat: initial KBL support
tools/power turbostat: initial SKX support
tools/power turbostat: decode BXT TSC frequency via CPUID
tools/power turbostat: initial BXT support
tools/power turbostat: print IRTL MSRs
tools/power turbostat: SGX state should print only if --debug
intel_idle: Add KBL support
intel_idle: Add SKX support
intel_idle: Clean up all registered devices on exit.
intel_idle: Propagate hot plug errors.
intel_idle: Don't overreact to a cpuidle registration failure.
intel_idle: Setup the timer broadcast only on successful driver load.
intel_idle: Avoid a double free of the per-CPU data.
intel_idle: Fix dangling registration on error path.
intel_idle: Fix deallocation order on the driver exit path.
intel_idle: Remove redundant initialization calls.
intel_idle: Fix a helper function's return value.
intel_idle: remove useless return from void function.
...
the pinctrl driver to have two different pinctrl devices for each bus on the
Amlogic Meson8 / Meson8b SoCs.
These are the missing patches for documentation and DT that weren't pulled into
mainline with the driver changes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=6xQq
-----END PGP SIGNATURE-----
Merge tag 'meson8-dt-fix' of https://github.com/carlocaione/linux-meson into fixes
With http://www.spinics.net/lists/devicetree/msg116771.html we split / refactor
the pinctrl driver to have two different pinctrl devices for each bus on the
Amlogic Meson8 / Meson8b SoCs.
These are the missing patches for documentation and DT that weren't pulled into
mainline with the driver changes.
* tag 'meson8-dt-fix' of https://github.com/carlocaione/linux-meson:
documentation: Fix pinctrl documentation for Meson8 / Meson8b
ARM: dts: amlogic: Split pinctrl device for Meson8 / Meson8b
Update the comment to reflect the changes of commit 0de7985 (parisc: Use
generic extable search and sort routines).
Signed-off-by: Helge Deller <deller@gmx.de>
Handling exceptions from modules never worked on parisc.
It was just masked by the fact that exceptions from modules
don't happen during normal use.
When a module triggers an exception in get_user() we need to load the
main kernel dp value before accessing the exception_data structure, and
afterwards restore the original dp value of the module on exit.
Noticed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
The kernel module testcase (lib/test_user_copy.c) exhibited a kernel
crash on parisc if the parameters for copy_from_user were reversed
("illegal reversed copy_to_user" testcase).
Fix this potential crash by checking the fault handler if the faulting
address is in the exception table.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Cc: Kees Cook <keescook@chromium.org>
We want to avoid the kernel module loader to create function pointers
for the kernel fixup routines of get_user() and put_user(). Changing
the external reference from function type to int type fixes this.
This unbreaks exception handling for get_user() and put_user() when
called from a kernel module.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Commit 0de7985 (parisc: Use generic extable search and sort routines)
changed the exception tables to use 32bit relative offsets.
This patch now adds support to the kernel module loader to handle such
R_PARISC_PCREL32 relocations for 32- and 64-bit modules.
Signed-off-by: Helge Deller <deller@gmx.de>
* pm-core:
PM / wakeirq: fix wakeirq setting after wakup re-configuration from sysfs
PM / runtime: Document steps for device removal
* powercap:
powercap: intel_rapl: Add missing Haswell model
* pm-tools:
tools/power turbostat: work around RC6 counter wrap
tools/power turbostat: initial KBL support
tools/power turbostat: initial SKX support
tools/power turbostat: decode BXT TSC frequency via CPUID
tools/power turbostat: initial BXT support
tools/power turbostat: print IRTL MSRs
tools/power turbostat: SGX state should print only if --debug
omap_rev is used to detect various SoC types, however any misuse of
the usage by invoking it earlier than it being populated will result
in invalid results. Lets flag them as early as possible to prevent
unintended side effects taking place. We get 0 if it is uninitialized
and -1 when detection is done using device tree (as the case was for
DRA7 as the case was prior to commit 06c2d368fc ("ARM: OMAP: DRA7:
Make use of omap_revision information for soc_is* calls")
Signed-off-by: Nishanth Menon <nm@ti.com>
Tested-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This is w.r.t J6/J6eco: 32clk is pseudo (erratum i856) - clock source.
Errata i856 for the AM572x (DRA7xx) points out that the 32.768KHz external
crystal is not enabled at power up. Instead the CPU falls back to using
an emulation for the 32KHz clock which is SYSCLK1/610. SYSCLK1 is usually
20MHz on boards so far (which gives an emulated frequency of 32.786KHz)
Modelling the same in device tree.
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
When commit 06c2d368fc ("ARM: OMAP: DRA7: Make use of omap_revision
information for soc_is* calls") introduced SoC check using
omap_revision, it missed providing DRA7 as class for initializing
the omap_version variable. Without doing this, soc_is_dra7xx() will
fail and as a result, omap4_pm_init_early never initializes the dra7
erratum for CPU power state. This causes the suspend path to fail
on DRA7 devices.
Fixes: 06c2d368fc ("ARM: OMAP: DRA7: Make use of omap_revision information for soc_is* calls")
Signed-off-by: Nishanth Menon <nm@ti.com>
Tested-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
DRA7 has no SAR region for automated save and restore of wakeupgen,
which does not make real since the SoC really does not do legacy OFF
mode anymore. Further wakeupgen should never loose context in CSWR
retention mode for MPU domain on DRA7 since that is the deepest state
we will enter.
So, just skip, instead of oopsing as follows while attemptint to enter
suspend on BeagleBoard-X15.
[ 55.589771] Unable to handle kernel paging request at virtual address 00002684
[ 55.589771] pgd = ec69c000
[...]
[ 55.589771] [<c0123cc8>] (irq_notifier) from [<c015ad70>] (notifier_call_chain+0x4c/0x8c)
[ 55.589771] [<c015ad70>] (notifier_call_chain) from [<c021469c>] (cpu_cluster_pm_enter+0x2c/0x78)
[ 55.589771] [<c021469c>] (cpu_cluster_pm_enter) from [<c0514508>] (syscore_suspend+0xb8/0x31c)
[ 55.589771] [<c0514508>] (syscore_suspend) from [<c0197d24>] (suspend_devices_and_enter+0x308/0x9e4)
[ 55.589771] [<c0197d24>] (suspend_devices_and_enter) from [<c0198a40>] (pm_suspend+0x640/0x75c)
[ 55.589771] [<c0198a40>] (pm_suspend) from [<c0196bcc>] (state_store+0x64/0xb8)
[ 55.589771] [<c0196bcc>] (state_store) from [<c0307914>] (kernfs_fop_write+0xc0/0x1bc)
[ 55.589771] [<c0307914>] (kernfs_fop_write) from [<c028ac80>] (__vfs_write+0x1c/0xd8)
[ 55.589771] [<c028ac80>] (__vfs_write) from [<c028bb70>] (vfs_write+0x90/0x16c)
[ 55.589771] [<c028bb70>] (vfs_write) from [<c028c890>] (SyS_write+0x44/0x9c)
[ 55.589771] [<c028c890>] (SyS_write) from [<c0107840>] (ret_fast_syscall+0x0/0x1c)
[...]
Signed-off-by: Nishanth Menon <nm@ti.com>
Tested-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Addresses:
- Wrong indentation in the PMU code from the merge window
- A long-time bug occuring with running ntpd on the host, candidate for stable
- Properly handle (and warn about) the unsupported configuration of running on
systems with less than 40 bits of PA space
- More fixes to the PM and hotplug notifier stuff from the merge window
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXB3xgAAoJEEtpOizt6ddy3g4H/39G6Q3UUeDmfC/BFBHWwW9j
5SOGxiEU9LdZUo/SjSGxeB7Z9+avQqveYUg1P+TSuv2L1Aejawooe1Eo0sL194Fb
0yci/dJoTtkrS5b8l/05V6UsXruEHEfMYmEmAVPZWew1Zh7HvysZ1R43vRh4r8sO
rBPLomeKyzqyqGqjAVFZ+V+rQJPlN4CRLup8JirIu7f7jNb8wE//D41ej88v1/Tn
lF2oKx49uRUpUjBBoPqeus1UAu6Ply033VcKLq2oapyhGzWUG9Vd8OdRulHtroTB
yBJhpQnX/+ep3l9r2X0ZBu7rVKao2Sd9UsxozaW7W49zhgQKb13IdnTLYkSPHfE=
=FLXQ
-----END PGP SIGNATURE-----
Merge tag 'kvm-arm-for-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm
KVM/ARM Fixes for v4.6-rc4
Addresses:
- Wrong indentation in the PMU code from the merge window
- A long-time bug occuring with running ntpd on the host, candidate for stable
- Properly handle (and warn about) the unsupported configuration of running on
systems with less than 40 bits of PA space
- More fixes to the PM and hotplug notifier stuff from the merge window
It was reported that a kernel with CONFIG_ARM_PATCH_IDIV=y stopped
booting when compiled with the upcoming gcc 6. Turns out that turning
a function address into a writable array is undefined and gcc 6 decided
it was OK to omit the store to the first word of the function while
still preserving the store to the second word.
Even though gcc 6 is now fixed to behave more coherently, it is a
mystery that gcc 4 and gcc 5 actually produce wanted code in the kernel.
And in fact the reduced test case to illustrate the issue does indeed
break with gcc < 6 as well.
In any case, let's guard the kernel against undefined compiler behavior
by hiding the nature of the array location as suggested by gcc
developers.
Reference: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=70128
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Reported-by: Marcin Juszkiewicz <mjuszkiewicz@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: stable@vger.kernel.org # v4.5
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Some processors use the Interrupt Response Time Limit (IRTL) MSR value
to describe the maximum IRQ response time latency for deep
package C-states. (Though others have the register, but do not use it)
Lets print it out to give insight into the cases where it is used.
IRTL begain in SNB, with PC3/PC6/PC7, and HSW added PC8/PC9/PC10.
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
As mentioned in LTP's README.ARC:
------------->8------------
Requirements for the environment
* Linux must be built with support of loop block devices. Thus it's
necessary to enable these Linux kernel options:
CONFIG_BLK_DEV
CONFIG_BLK_DEV_LOOP
------------->8------------
enabling loop block devices.
That among other things lead to additional 10 fatal signals
appearing during LTP run.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
This reverts commit 667a490bdb.
This is needed to get ethernet(stmmac) working in 4.6-rc2 on axs103.
4.5 needed this fix, but apprently stmmac has gained some fixes which
warrant reversal of this.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
During mmaping of frame-buffer pages to user-space
fb_protect() is called to set proper page settings.
In case of ARC we need to mark pages that are mmaped to
user as uncached because of 2 reasons:
* Huge amount of data if passing through data cache will
thrash cache a lot making cache almost useless for other
less traffic hungry processes.
* Data written by user in FB will be immediately available for
hardware (such as PGU etc) without requirements to flush data
cache regularly.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: linux-snps-arc@lists.infradead.org
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Commit 5f8fc43217 ("PCI: Include pci/pcie/Kconfig directly from
pci/Kconfig") in linux-next changed drivers/pci/Kconfig to include
drivers/pci/pcie/Kconfig itself, so that architectures do not need
to source both files themselves. ARC just recently gained PCI support
through commit 6b3fb77998dd ("ARC: Add PCI support"), but this change
was based on the old behaviour of the Kconfig files. This makes
Kconfig now spit out the following warnings:
drivers/pci/pcie/Kconfig:61:warning: choice value used outside its choice group
drivers/pci/pcie/Kconfig:67:warning: choice value used outside its choice group
drivers/pci/pcie/Kconfig:74:warning: choice value used outside its choice group
This change updates the Kconfig file for ARC, dropping the now
unnecessary 'source' statement, which makes the warning disappear.
Signed-off-by: Andreas Ziegler <andreas.ziegler@fau.de>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Let's see if anybody even notices. I doubt anybody uses this, and it
does expose addresses that should be randomized, so let's just remove
the code. It's old and traditional, and it used to be cute, but we
should have removed this long ago.
If it turns out anybody notices and this breaks something, we'll have to
revert this, and maybe we'll end up using other approaches instead
(using %pK or similar). But removing unnecessary code is always the
preferred option.
Noted-by: Emrah Demir <ed@abdsec.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 1e947bad0b ("arm64: KVM: Skip HYP setup when already running
in HYP") re-organized the hyp init code and ended up leaving the CPU
hotplug and PM notifier even if hyp mode initialization fails.
Since KVM is not yet supported with ACPI, the above mentioned commit
breaks CPU hotplug in ACPI boot.
This patch fixes teardown_hyp_mode to properly unregister both CPU
hotplug and PM notifiers in the teardown path.
Fixes: 1e947bad0b ("arm64: KVM: Skip HYP setup when already running in HYP")
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
We always thought that 40bits of PA range would be the minimum people
would actually build. Anything less is terrifyingly small.
Turns out that we were both right and wrong. Nobody has ever built
such a system, but the ARM Foundation Model has a PARange set to 36bits.
Just because we can. Oh well. Now, the KVM API explicitely says that
we offer a 40bit PA space to the VM, so we shouldn't run KVM on
the Foundation Model at all.
That being said, this patch offers a less agressive alternative, and
loudly warns about the configuration being unsupported. You'll still
be able to run VMs (at your own risks, though).
This is just a workaround until we have a proper userspace API where
we report the PARange to userspace.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
others are usual stable material.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJXA8x6AAoJEL/70l94x66D0x8H/RcBnc75994RQ++WmHSvD9GF
yruGB8soLDdjX+Oceol0aEPHokrBu3JtcdoTBe0GwbCKV/F5NkQZ4EfLxDtR3tte
7ILkPULLy5GElFpJNQuT4pmXzTEspFvXpqHhFik7WVBga3W9wMFQcjbrgmGBUzLE
p2aJVhZyErpKxGFkUYWhDnlqWsguTTIzv/pqNhLY4VVc0UrXN9AA0fq9RkvgU3KS
Hxk4/A6SV/b7dyzvttzITww0f1iu8FmlLj2TXapIEoOz7AnInD6KIN0RYpxbDjxN
bEzEfpahUtuDeM87/t2kHEj0Gn09iHK7/BbCC1Hrwo1CQhbAQ/D0GIvqYAQixf4=
=NugZ
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Miscellaneous bugfixes.
The ARM and s390 fixes are for new regressions from the merge window,
others are usual stable material"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
compiler-gcc: disable -ftracer for __noclone functions
kvm: x86: make lapic hrtimer pinned
s390/mm/kvm: fix mis-merge in gmap handling
kvm: set page dirty only if page has been writable
KVM: x86: reduce default value of halt_poll_ns parameter
KVM: Hyper-V: do not do hypercall userspace exits if SynIC is disabled
KVM: x86: Inject pending interrupt even if pending nmi exist
arm64: KVM: Register CPU notifiers when the kernel runs at HYP
arm64: kvm: 4.6-rc1: Fix VTCR_EL2 VS setting
When a vCPU runs on a nohz_full core, the hrtimer used by
the lapic emulation code can be migrated to another core.
When this happens, it's possible to observe milisecond
latency when delivering timer IRQs to KVM guests.
The huge latency is mainly due to the fact that
apic_timer_fn() expects to run during a kvm exit. It
sets KVM_REQ_PENDING_TIMER and let it be handled on kvm
entry. However, if the timer fires on a different core,
we have to wait until the next kvm exit for the guest
to see KVM_REQ_PENDING_TIMER set.
This problem became visible after commit 9642d18ee. This
commit changed the timer migration code to always attempt
to migrate timers away from nohz_full cores. While it's
discussable if this is correct/desirable (I don't think
it is), it's clear that the lapic emulation code has
a requirement on firing the hrtimer in the same core
where it was started. This is achieved by making the
hrtimer pinned.
Lastly, note that KVM has code to migrate timers when a
vCPU is scheduled to run in different core. However, this
forced migration may fail. When this happens, we can have
the same problem. If we want 100% correctness, we'll have
to modify apic_timer_fn() to cause a kvm exit when it runs
on a different core than the vCPU. Not sure if this is
possible.
Here's a reproducer for the issue being fixed:
1. Set all cores but core0 to be nohz_full cores
2. Start a guest with a single vCPU
3. Trace apic_timer_fn() and kvm_inject_apic_timer_irqs()
You'll see that apic_timer_fn() will run in core0 while
kvm_inject_apic_timer_irqs() runs in a different core. If
you get both on core0, try running a program that takes 100%
of the CPU and pin it to core0 to force the vCPU out.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
commit 1e133ab296 ("s390/mm: split arch/s390/mm/pgtable.c") dropped
some changes from commit a3a92c31bf ("KVM: s390: fix mismatch
between user and in-kernel guest limit") - this breaks KVM for some
memory sizes (kvm-s390: failed to commit memory region) like
exactly 2GB.
Cc: Dominik Dingel <dingel@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull MIPS fixes from Ralf Baechle:
"This is the first round of MIPS fixes for 4.6:
- Fix spelling mistakes all over arch/mips
- Provide __bswapsi2 so XZ kernel compression will build with older GCC
- ATH79 clock fixes.
- Fix clock-rated copy-paste erros in ATH79 DTS.
- Fix gisb-arb compatible string for 7435 BMIPS
- Enable NAND and UBIFS support in CI20.
- Fix BUG() assertion caused by inapropriate smp_processor_id() use.
- Fix exception handling issues for the sake of debuggers
- Fix the last remaining instance of irq_to_gpio in the db1xxx_ss PCMCIA code
- Fix MSA unaligned load failures
- Panic if kernel is configured for a not TLB-supported page size
- Bail out on unsupported relocs in modules.
- Partial fix for Qemu breakage after recent IPI rewrite
- Wire up the preadv2 and pwrite2 syscalls
- Fix the ar724x clock calculation"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: traps.c: Verify the ISA for microMIPS RDHWR emulation
MIPS: BMIPS: Fix gisb-arb compatible string for 7435
MIPS: Bail on unsupported module relocs
MIPS: dts: qca: ar9132_tl_wr1043nd_v1.dts: use "ref" for reference clock name
MIPS: ath79: Fix the ar913x reference clock rate
MIPS: ath79: Fix the ar724x clock calculation
dt-bindings: clock: qca,ath79-pll: fix copy-paste typos
MIPS: traps: Correct the SIGTRAP debug ABI in `do_watch' and `do_trap_or_bp'
FIRMWARE: Broadcom: Fix grammar of warning messages in bcm47xx_sprom.c.
MIPS: ci20: Enable NAND and UBIFS support in defconfig.
MIPS: Fix misspellings in comments.
MIPS: tlb-r4k: panic if the MMU doesn't support PAGE_SIZE
MIPS: zboot: Remove copied source files on clean
MIPS: zboot: Fix the build with XZ compression on older GCC versions
MIPS: Wire up preadv2 and pwrite2 syscalls.
MIPS: cpu_name_string: Use raw_smp_processor_id().
pcmcia: db1xxx_ss: fix last irq_to_gpio user
MIPS: Fix MSA ld unaligned failure cases
MIPS: Fix broken malta qemu
- Safely migrate event channels between CPUs.
- Fix CPU hotplug.
- Maintainer changes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXAkQtAAoJEFxbo/MsZsTRpAoH/R0mVySTK3RloxRo4SPDWs//
3EIgDFBCde/JfDmhJw7OTLC6oHExq/ObBunV4I6HSStDYjZfHnMXTe7uiRo6oOUt
ql8/k1P4NM202L2qkjZU89ObPwOMbx50NiHtVG3JAIydZc/jgn4/brow9ZymDAUd
lp85Oj0d66uM5iIY9YVa5nY/calt5W0rr9EoV93HSf6GFefNJKXJ5u3KW8IgMyIl
I4/y8GraQLAcXBcmrOny51nlIxsiv1wTssJfExH49/8In3JH3SlbZDGuEiIovPUC
jJ96Tr/oOhFyPZIM3J7pFYpvn4en84V07zbaWcEUmVf8capv3pjwJNg2Xx64FdI=
=bSO5
-----END PGP SIGNATURE-----
Merge tag 'for-linus-4.6-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from David Vrabel:
"Regression and bug fixes for 4.6-rc2:
- safely migrate event channels between CPUs
- fix CPU hotplug
- maintainer changes"
* tag 'for-linus-4.6-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
MAINTAINERS: xen: Konrad to step down and Juergen to pick up
xen/events: Mask a moving irq
Xen on ARM and ARM64: update MAINTAINERS info
xen/x86: Call cpu_startup_entry(CPUHP_AP_ONLINE_IDLE) from xen_play_dead()
xen/apic: Provide Xen-specific version of cpu_present_to_apicid APIC op
Merge PAGE_CACHE_SIZE removal patches from Kirill Shutemov:
"PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
Let's stop pretending that pages in page cache are special. They are
not.
The first patch with most changes has been done with coccinelle. The
second is manual fixups on top.
The third patch removes macros definition"
[ I was planning to apply this just before rc2, but then I spaced out,
so here it is right _after_ rc2 instead.
As Kirill suggested as a possibility, I could have decided to only
merge the first two patches, and leave the old interfaces for
compatibility, but I'd rather get it all done and any out-of-tree
modules and patches can trivially do the converstion while still also
working with older kernels, so there is little reason to try to
maintain the redundant legacy model. - Linus ]
* PAGE_CACHE_SIZE-removal:
mm: drop PAGE_CACHE_* and page_cache_{get,release} definition
mm, fs: remove remaining PAGE_CACHE_* and page_cache_{get,release} usage
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
Mostly direct substitution with occasional adjustment or removing
outdated comments.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Make sure it's the microMIPS rather than MIPS16 ISA before emulating
microMIPS RDHWR. Mostly needed as an optimisation for configurations
where `cpu_has_mmips' is hardcoded to 0 and also a good measure in case
we add further microMIPS instructions to emulate in the future, as the
corresponding MIPS16 encoding is ADDIUSP, not supposed to trap.
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12282/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Pull x86 fixes from Thomas Gleixner:
"This lot contains:
- Some fixups for the fallout of the topology consolidation which
unearthed AMD/Intel inconsistencies
- Documentation for the x86 topology management
- Support for AMD advanced power management bits
- Two simple cleanups removing duplicated code"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Add advanced power management bits
x86/thread_info: Merge two !__ASSEMBLY__ sections
x86/cpufreq: Remove duplicated TDP MSR macro definitions
x86/Documentation: Start documenting x86 topology
x86/cpu: Get rid of compute_unit_id
perf/x86/amd: Cleanup Fam10h NB event constraints
x86/topology: Fix AMD core count
When an unsupported reloc is encountered in a module, we currently
blindly branch to whatever would be at its entry in the reloc handler
function pointer arrays. This may be NULL, or if the unsupported reloc
has a type greater than that of the supported reloc with the highest
type then we'll dereference some value after the function pointer array
& branch to that. The result is at best a kernel oops.
Fix this by checking that the reloc type has an entry in the function
pointer array (ie. is less than the number of items in the array) and
that the handler is non-NULL, returning an error code to fail the module
load if no handler is found.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12432/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Current ath79 clock.c code does not read reference clock and
pll setup from devicetree. The ar724x_clocks_init() function
recreates the clocks from scratch so devicetree clock
information is dropped. After adding the code which picked up
reference clock from devicetree I have found
that kernel does not boot anymore. The SPI and UART drivers
can't get clk; here are the bootlog error messages:
of_serial: probe of 18020000.uart failed with error -22
ath79-spi: probe of 1f000000.spi failed with error -22
The problem is that clock code assumes that reference clock
name is "ref" but current dts-file uses another name: "oscillator".
This patch fixes the problem by changing external oscillator
dt node name to "ref".
Please note that there is an alternative solution for the problem:
> --- a/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts
> +++ b/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts
> @@ -16,6 +16,7 @@
>
> extosc: oscillator {
> compatible = "fixed-clock";
> + clock-output-names = "ref";
> #clock-cells = <0>;
> clock-frequency = <40000000>;
> };
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Cc: Alban Bedel <albeu@free.fr>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-clk@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12874/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The reference clock on ar913x is at 40MHz and not 5MHz. The current
implementation use the wrong reference rate because it doesn't take
the PLL divider in account. But if we fix the code to use the divider
it becomes identical with the implementation for ar724x, so just drop
the broken ar913x implementation.
Signed-off-by: Alban Bedel <albeu@free.fr>
Tested-by: Antony Pavlov <antonynpavlov@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12871/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
According to the AR7242 datasheet section 2.8, AR724X CPUs use a 40MHz
input clock as the REF_CLK instead of 5MHz.
The correct CPU PLL calculation procedure is as follows:
CPU_PLL = (FB * REF_CLK) / REF_DIV / 2.
This patch is compatible with the current calculation procedure with
default FB and REF_DIV values.
Tested on AR7240, AR7241 and AR7242.
Signed-off-by: Weijie Gao <hackpascal@gmail.com>
Signed-off-by: Alban Bedel <albeu@free.fr> (Fixed the commit log message)
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12870/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Follow our own rules set in <asm/siginfo.h> for SIGTRAP signals issued
from `do_watch' and `do_trap_or_bp' by setting the signal code to
TRAP_HWBKPT and TRAP_BRKPT respectively, for Watch exceptions and for
those Breakpoint exceptions whose originating BREAK instruction's code
does not have a special meaning. Keep Trap exceptions unaffected as
these are not debug events.
No existing user software is expected to examine signal codes for these
signals as SI_KERNEL has been always used here. This change makes the
MIPS port more like other Linux ports, which reduces the complexity and
provides for performance improvement in GDB.
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Luis Machado <lgustavo@codesourcery.com>
Cc: linux-mips@linux-mips.org
Cc: gdb@sourceware.org
Patchwork: https://patchwork.linux-mips.org/patch/12758/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
After writing the appropriate mask to the cop0 PageMask register, read
the register back & check it matches what we want. If it doesn't then
the MMU does not support the page size the kernel is configured for and
we're better off bailing than continuing to do odd things with TLB
exceptions.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: Joshua Kinard <kumba@gentoo.org>
Cc: Rafał Miłecki <zajec5@gmail.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/10691/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The copied source files must be added to the extra-y list to have them
removed on clean.
Signed-off-by: Alban Bedel <albeu@free.fr>
Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: Alex Smith <alex.smith@imgtec.com>
Cc: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12233/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Some older GCC version (at least 4.6) emits calls to __bswapsi2() when
building the XZ decompressor. The link of the compressed image then
fails with the following error:
arch/mips/boot/compressed/decompress.o: In function '__fswab32':
include/uapi/linux/swab.h:60: undefined reference to '__bswapsi2'
Add bswapsi.o to the link to fix the build with these versions.
Signed-off-by: Alban Bedel <albeu@free.fr>
Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: Alex Smith <alex.smith@imgtec.com>
Cc: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12232/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Revert this commit to fix regressions on non-dragonboard MSM8974 boards.
This will be put back in after the correct fixes to the bam driver are
accepted that allow remote processor control of the main control registers.
This reverts commit 0a5d0f85bb.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Revert this commit to fix regressions on non-dragonboard MSM8974 boards.
This will be put back in after the correct fixes to the bam driver are
accepted that allow remote processor control of the main control registers.
This reverts commit 62bc817922.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Just one fix for a nasty boot failure on some systems based on
Intel Skylake that shipped with broken firmware where enabling
hardware-coordinated P-states management (HWP) causes a faulty
interrupt handler in SMM to be invoked and crash the system
(Srinivas Pandruvada).
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=GJ34
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-4.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI fix from Rafael J. Wysocki:
"Just one fix for a nasty boot failure on some systems based on Intel
Skylake that shipped with broken firmware where enabling
hardware-coordinated P-states management (HWP) causes a faulty
interrupt handler in SMM to be invoked and crash the system (Srinivas
Pandruvada)"
* tag 'pm+acpi-4.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / processor: Request native thermal interrupt handling via _OSC
Merge fixes from Andrew Morton:
"11 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
.mailmap: add Christophe Ricard
Make CONFIG_FHANDLE default y
mm/page_isolation.c: fix the function comments
oom, oom_reaper: do not enqueue task if it is on the oom_reaper_list head
mm/page_isolation: fix tracepoint to mirror check function behavior
mm/rmap: batched invalidations should use existing api
x86/mm: TLB_REMOTE_SEND_IPI should count pages
mm: fix invalid node in alloc_migrate_target()
include/linux/huge_mm.h: return NULL instead of false for pmd_trans_huge_lock()
mm, kasan: fix compilation for CONFIG_SLAB
MAINTAINERS: orangefs mailing list is subscribers-only
Masahiro Yamada reports that we can fail to set the FW bit in the
auxiliary control register, which enables broadcasting the cache
maintanence operations. This occurs because we only check that the
SMP/nAMP bit is set, rather than checking whether all the bits we
want to be set are set.
Rearrange the code to ensure that all desired bits are set, and only
update the register if we discover some required bits are not set.
Tested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
- Fix oops when patching in alternative sequences on big-endian CPUs
- Reconcile asm/perf_event.h after merge window fallout with KVM ARM
- Defconfig updates
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCgAGBQJW/jkCAAoJELescNyEwWM0xyAH+wdmjlc5WqtgjF68AYRgbWk/
5GufYlxeMvST7eyT65dZKAyDpJpOBnTXMB7u8KkoGgSEmrdDV0bAjn5CJX41rfxf
dlc9QDisuCAmxuIkQYGK2IJhnk69ehKhqw0w8dstVW2CSOBYtHnSSNtV8WyrKj+D
QEM2Z86HCqM8BaSYhxv8Cte8W5fBegCqciJAVQoihAwioiuZ3cgsrLrT2QHaDhin
gfCTNk/snHG3PAvuy+Kx1PICMH+ur4Enk8bft8xO6HzqSSDsWv/TD35VzcX5pY9V
PRlC4D5TCEzwQQmFHpUj4PeQytIQge/Y3Ux/OUk1caq0Yei13RhOhR9q2+gTwKI=
=gJNY
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
- fix oops when patching in alternative sequences on big-endian CPUs
- reconcile asm/perf_event.h after merge window fallout with KVM ARM
- defconfig updates
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: defconfig: updates for 4.6
arm64: perf: Move PMU register related defines to asm/perf_event.h
arm64: opcodes.h: Add arm big-endian config options before including arm header
The recently introduced batched invalidations mechanism uses its own
mechanism for shootdown. However, it does wrong accounting of
interrupts (e.g., inc_irq_stat is called for local invalidations),
trace-points (e.g., TLB_REMOTE_SHOOTDOWN for local invalidations) and
may break some platforms as it bypasses the invalidation mechanisms of
Xen and SGI UV.
This patch reuses the existing TLB flushing mechnaisms instead. We use
NULL as mm to indicate a global invalidation is required.
Fixes 72b252aed5 ("mm: send one IPI per CPU to TLB flush all entries after unmapping pages")
Signed-off-by: Nadav Amit <namit@vmware.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
TLB_REMOTE_SEND_IPI was recently introduced, but it counts bytes instead
of pages. In addition, it does not report correctly the case in which
flush_tlb_page flushes a page. Fix it to be consistent with other TLB
counters.
Fixes: 5b74283ab2 ("x86, mm: trace when an IPI is about to be sent")
Signed-off-by: Nadav Amit <namit@vmware.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes this build error on linux-next:
kernel/seccomp.c: In function '__secure_computing_strict':
kernel/seccomp.c:526:3: error: implicit declaration of function
'get_compat_mode1_syscalls'
The retrieval of compat syscall numbers were moved into inline function
defined in asm-generic header but the asm-generic header is not being
used by s390.
[heiko.carstens@de.ibm.com]: even though the build error will trigger
only in the next merge window it makes sense to include the generic
header file already now.
Fixes: ("seccomp: Get compat syscalls from asm-generic header")
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Newer machines might use a different (larger) format for function
measurement blocks. To ensure that we comply with the alignment
requirement on these machines and prevent memory corruption (when
firmware writes more data than we expect) add 16 padding bytes
at the end of the fmb.
Cc: stable@vger.kernel.org # v4.1+
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
This patch adds new ports-implemented mask, which is required to get
achi working on the mainline. Without this patch value read from
PORTS_IMPL register which is zero would not enable any ports for
software to use.
Fixes: 566d1827df ("libata: disable forced PORTS_IMPL for >= AHCI 1.3")
Cc: stable@vger.kernel.org # v4.5+
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
- Fixup preempt underflow with huge pages from Sebastian Siewior
- Fix altivec SPR not being saved from Oliver O'Halloran
- Correct used_vsr comment from Simon Guo
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJW/ki6AAoJEFHr6jzI4aWAH14QAKWhKBtOVNW0XHWMexfam4t2
W5R9OstmXCPzxK4xfXK2R4ixQDSg3XIsZhWlD36lEb8UqcGz0sshrKbcBO0ZKsNd
4zYkmK4lX8qiQ1fpZp/5ISIl6+kX3ogLzIsGcw7S3SedhQgpfOSNZOQIOxQeNkwg
NCcVk8J7s2KVRQMRme85iaoWKOSDoW9vQ3Jem0w5uSUlG48jTIPEL16OckFt9CsI
gHTTH6ypzWmYjfauMW3US3yCUB2maKsM4kDR9bvETu/32zvwAW6dP9164DhTrH5S
8frQeRXvlk3jbXlpUqRI4fGTWKoCufFCtRzYEUlYLxo+fxmqLX+VbbhLHoHJbA2Z
1wU/Q0vyK2XxFAV9BijJfnNqfejSGR/sKX1bxqs3dPxgeAP/0qU1DI6DX9GwSQum
ikYAj1ZK7NUsnRcekMwfR/uoIQsDryTt9w/SQRoZ4xqpRNbjJM6bqbzeurNxIpKj
2LuxqJJFdy0iduTpmkVDeNUd5xwEYFDlt+p+uYlZhRE4EQTzUbysSUxAsbscazGX
jJT/ACzco4B3qYYwepLVCV1oYFTL7/zissq6DGiO99DLOrRU1ON3We2Ouow+ykdV
oD2DDz0kPFgmnECMhSl2pApCUeRG7Kw0QPT317W+DaPFDccgkOPg7u477aVvMlEP
3VHmTLoy+7ze0erDjFzo
=9i5T
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fixup preempt underflow with huge pages from Sebastian Siewior
- Fix altivec SPR not being saved from Oliver O'Halloran
- Correct used_vsr comment from Simon Guo
* tag 'powerpc-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: Correct used_vsr comment
powerpc/process: Fix altivec SPR not being saved
powerpc/mm: Fixup preempt underflow with huge pages
Pull s390 fixes from Martin Schwidefsky:
- A proper fix for the locking issue in the dasd driver
- Wire up the new preadv2 nad pwritev2 system calls
- Add the mark_rodata_ro function and set DEBUG_RODATA=y
- A few more bug fixes.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: wire up preadv2/pwritev2 syscalls
s390/pci: PCI function group 0 is valid for clp_query_pci_fn
s390/crypto: provide correct file mode at device register.
s390/mm: handle PTE-mapped tail pages in fast gup
s390: add DEBUG_RODATA support
s390: disable postinit-readonly for now
s390/dasd: reorder lcu and device lock
s390/cpum_sf: Fix cpu hotplug notifier transitions
s390/cpum_cf: Fix missing cpu hotplug notifier transition
In absence of shadow dirty mask, there is no need to set page dirty
if page has never been writable. This is a tiny optimization but
good to have for people who care much about dirty page tracking.
Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Windows lets applications choose the frequency of the timer tick,
and in Windows 10 the maximum rate was changed from 1024 Hz to
2048 Hz. Unfortunately, because of the way the Windows API
works, most applications who need a higher rate than the default
64 Hz will just do
timeGetDevCaps(&tc, sizeof(tc));
timeBeginPeriod(tc.wPeriodMin);
and pick the maximum rate. This causes very high CPU usage when
playing media or games on Windows 10, even if the guest does not
actually use the CPU very much, because the frequent timer tick
causes halt_poll_ns to kick in.
There is no really good solution, especially because Microsoft
could sooner or later bump the limit to 4096 Hz, but for now
the best we can do is lower a bit the upper limit for
halt_poll_ns. :-(
Reported-by: Jon Panozzo <jonp@lime-technology.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If SynIC is disabled, there is nothing that userspace can do to
handle these exits; on the other hand, userspace probably will
not know about KVM_EXIT_HYPERV_HCALL and complain about it or
even exit. Just prevent anything bad from happening by handling
the hypercall in KVM and returning an "invalid hypercall" code.
Fixes: 83326e43f2
Cc: Andrey Smetanin <irqlevel@gmail.com>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Non maskable interrupts (NMI) are preferred to interrupts in current
implementation. If a NMI is pending and NMI is blocked by the result
of nmi_allowed(), pending interrupt is not injected and
enable_irq_window() is not executed, even if interrupts injection is
allowed.
In old kernel (e.g. 2.6.32), schedule() is often called in NMI context.
In this case, interrupts are needed to execute iret that intends end
of NMI. The flag of blocking new NMI is not cleared until the guest
execute the iret, and interrupts are blocked by pending NMI. Due to
this, iret can't be invoked in the guest, and the guest is starved
until block is cleared by some events (e.g. canceling injection).
This patch injects pending interrupts, when it's allowed, even if NMI
is blocked. And, If an interrupts is pending after executing
inject_pending_event(), enable_irq_window() is executed regardless of
NMI pending counter.
Cc: stable@vger.kernel.org
Signed-off-by: Yuki Shibuya <shibuya.yk@ncos.nec.co.jp>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fixes a bug that corrupts stage-2 translationson 16-bit VMID equipped systems
and fixes CPU PM and Hotplug after the EL2 init code has been moved to C.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJW/jk7AAoJEEtpOizt6ddyL1EH/RcWeOllk64dLpFouig8F+Oe
Lm7b6okB8qJjZdpyStqWYGEWjd2kwZ5buUqmCf8kNPrQ143c3xwKAeb3hBly+6vK
RDbef6nZqqPihbYTohFzquQKOY8haselciYwmW6+Lkq8uaZ6jNSTbDKwjtDI8rry
+1FuSZKrUVz5xaj5qn4gDJjTmnZbX5rcdtwN3S9/AikPDtNZFZHcj8Qn/ps9jjLP
jB2XCIRXFZdxxYOAlYbRx+sTVEnsTBYAwCrvFErJAfBH8m0QR94mn1epU7QzdrKN
dnKbG4IYy19aPmOpfhGuQrUZ1G09QNSWQQ+BhG0pvq0/GBD0exkMdRssp11AXoI=
=XE1Y
-----END PGP SIGNATURE-----
Merge tag 'kvm-arm-for-4.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/ARM Fixes for Linux v4.6-rc2.
Fixes a bug that corrupts stage-2 translationson 16-bit VMID equipped systems
and fixes CPU PM and Hotplug after the EL2 init code has been moved to C.
The PCI function group 0 is a valid function group,
it is wrong to reject it.
Let's accept PCI function group 0.
Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Acked-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Pull parisc fixes from Helge Deller:
"Fix seccomp filter support and SIGSYS signals on compat kernel.
Both patches are tagged for v4.5 stable kernel"
* 'parisc-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix and enable seccomp filter support
parisc: Fix SIGSYS signals in compat case
Pull nvdimm mcsafe_memcpy use from Dan Williams:
"Now that mcsafe_memcpy() has landed, and the return value was been
clarified in commit cbf8b5a2b6 ("x86/mm, x86/mce: Fix return
type/value for memcpy_mcsafe()"), let's hook up its primary usage in
the pmem driver.
The compilation problems from the initial posting have been fixed,
this has appeared in a -next release with no reported issues, and it
picked up an ack from Ingo. There is no pressing need to merge this
in 4.6- rc2. However, if we wait until 4.7 the new memcpy_mcsafe()
capability will ship without a user in 4.6-final"
* 'libnvdimm-for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
x86, pmem: use memcpy_mcsafe() for memcpy_from_pmem()
The seccomp filter support requires careful handling of task registers. This
includes reloading of the return value (%r28) and proper syscall exit if
secure_computing() returned -1.
Additionally we need to sign-extend the syscall number from signed 32bit to
signed 64bit in do_syscall_trace_enter() since the ptrace interface only allows
storing 32bit values in compat mode.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v4.5
When the kernel is running at EL2, it doesn't need init_hyp_mode() to
configure page tables for HYP. This function also registers the CPU
hotplug and lower power notifiers that cause HYP to be re-initialised
after the CPU has been reset.
To avoid losing the register state that controls stage2 translation, move
the registering of these notifiers into init_subsystems(), and add a
is_kernel_in_hyp_mode() path to each callback.
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Fixes: 1e947bad0b ("arm64: KVM: Skip HYP setup when already running in HYP")
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
nios2 builds fail with the following build error.
arch/nios2/kernel/prom.c: In function 'early_init_dt_scan_serial':
arch/nios2/kernel/prom.c💯2: error:
implicit declaration of function 'fdt_translate_address'
Commit c90fe9c039 ("of: earlycon: Move address translation to
of_setup_earlycon()") replaced fdt_translate_address() with
of_flat_dt_translate_address() but missed updating the nios2 code.
Fixes: c90fe9c039 ("of: earlycon: Move address translation to of_setup_earlycon()")
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Ley Foon Tan <lftan@altera.com>
In Baltos iR5221 cpsw_emac0 is connected directly to the switch IC and
hence needs to be configured as "fixed-link".
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The ARM TWD interrupt is a private peripheral interrupt (PPI) and per
the ARM GIC documentation, whether the type for PPIs can be set is
IMPLEMENTATION DEFINED. For OMAP4 devices the PPI type cannot be set and
so when we attempt to set the type for the ARM TWD interrupt it fails.
This has done unnoticed because it fails silently and because we cannot
re-configure the type it has had no impact. Nevertheless fix the type
for the TWD interrupt so that it matches the hardware configuration.
Reported-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Silicon Rev 2.0 is a minor variant of Rev 1.0. Rev 2.0 is an incremental revision
with various fixes including the following:
- Reset logic fixes
- Few asymmetric aging logic fixes
- Ethernet speed fixes
- EDMA fixes for McASP
Signed-off-by: Vishal Mahaveer <vishalm@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
EDMA was allocating DMA channels 32 and 33 for memcpy usage, out of which
channel 33 is actually used by DES crypto engine. This bad allocation of
the channel causes a crash in the DES crypto engine, as the channel
gets configured for memcpy usage instead of hardware <-> memory DMA.
Fixed by allocating DMA channels 58 and 59 for memcpy usage (I2C0 RX/TX),
which are not used by anybody.
Fixes: cce1ee0001 ("ARM: DTS: am437x: Use the new DT bindings for
the eDMA3")
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Suggested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
commit 55ee7017ee ("arm: omap2: board-generic: use omap4_local_timer_init
for AM437x") makes synctimer32k as the clocksource on AM43xx. By default
the synctimer32k is clocked by 32K RTC OSC on AM43xx. But this 32K RTC OSC
is not available on epos boards which makes it fail to boot.
Synctimer32k can also be clocked by a peripheral PLL, so making this as
clock parent for synctimer3k on epos boards.
Fixes: 55ee7017ee ("arm: omap2: board-generic: use omap4_local_timer_init for AM437x")
Cc: stable@vger.kernel.org # v4.4+
Reported-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The following commits:
commit 3fa609755c ("ARM: omap2: restore OMAP4 barrier behaviour")
commit f746929ffd ("Revert "ARM: OMAP4: remove dead kconfig option OMAP4_ERRATA_I688"")
and
commit ea827ad5ff ("ARM: DRA7: Provide proper IO map table")
came in around the same time, unfortunately this seem to have missed
initializing the barrier for DRA7 platforms - omap5_map_io was reused
for dra7 till it was split out by the last patch. barrier_init
needs to be hence carried forward as it is valid for DRA7 family of
processors as they are for OMAP5.
Fixes: ea827ad5ff ("ARM: DRA7: Provide proper IO map table")
Cc: stable@vger.kernel.org # v4.1+
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reported-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
When we detect support for 16bit VMID in ID_AA64MMFR1, we set the
VTCR_EL2_VS field to 1 to make use of 16bit vmids. But, with
commit 3a3604bc5e ("arm64: KVM: Switch to C-based stage2 init")
this is broken and we corrupt VTCR_EL2:T0SZ instead of updating the VS
field. VTCR_EL2_VS was actually defined to the field shift (19) and
not the real value for VS. This patch fixes the issue.
Fixes: commit 3a3604bc5e ("arm64: KVM: Switch to C-based stage2 init")
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Fix a longstanding bug in the hwmod code that could cause
hardware SYSCONFIG register values to not match the kernel's
idea of what they should be, and that could result in lower
performance during IP block idle entry.
Basic build, boot, and PM test logs are available here:
http://www.pwsan.com/omap/testlogs/omap-hwmod-fixes-a-for-v4.6-rc/20160326231727/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=MWxZ
-----END PGP SIGNATURE-----
Merge tag 'for-v4.6-rc/omap-fixes-a' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into omap-for-v4.6/fixes
ARM: OMAP2+: first hwmod fix for v4.6-rc
Fix a longstanding bug in the hwmod code that could cause
hardware SYSCONFIG register values to not match the kernel's
idea of what they should be, and that could result in lower
performance during IP block idle entry.
Basic build, boot, and PM test logs are available here:
http://www.pwsan.com/omap/testlogs/omap-hwmod-fixes-a-for-v4.6-rc/20160326231727/
The USB2 port for Armada 38x is defined to be at 58000, not at
50000.
Cc: <stable@vger.kernel.org>
Fixes: 2d0a7addbd ("ARM: Kirkwood: Add support for many Synology NAS devices")
Signed-off-by: Patrick Uiterwijk <patrick@puiterwijk.org>
Acked-by: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The signedness mismatch of the argument type produces an error
compiling kernel/sched/core.c with -Werror=incompatible-pointer-types,
which is now used by default.
Fixes: ea8daa7b97 "kbuild: Add option to turn incompatible pointer check into error"
Signed-off-by: Rich Felker <dalias@libc.org>
The PCI memory windows available in vulcan.dtsi are limited to 128MB
for 32-bit BARs, and 4GB for 64-bit BARs. Given the memory mapped IO
space available in arm64, these windows can be increased substantially
to support more use cases.
The change increases the 32-bit window to 256MB and the 64-bit window
to 128 GB. The firmware on vulcan boards will use these ranges as well.
PCI IO windows are not supported on Vulcan, so remove them instead of
keeping an unused value.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Ux500 boards may have an RMI4 unit, and the DT fragments for
them have been merged upstream. Add it to the defconfig.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The removal was not complete and left behind one reference to a
removed function in smp-shx3.c. For completeness, also remove
declarations for functions that were removed.
Fixes: 45624ac389 "sh: remove arch-specific localtimer and use generic one"
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Rich Felker <dalias@libc.org>
If cpu_name_string() is used in non-atomic context when preemption is
enabled, it can trigger a BUG such as this one:
BUG: using smp_processor_id() in preemptible [00000000] code: unaligned/156
caller is __show_regs+0x1e4/0x330
CPU: 2 PID: 156 Comm: unaligned Tainted: G W 4.3.0-00366-ga3592179816d-dirty #1501
Stack : ffffffff80900000 ffffffff8019bc18 000000000000005f ffffffff80a20000
0000000000000000 0000000000000009 ffffffff8019c0e0 ffffffff80835648
a8000000ff2bdec0 ffffffff80a1e628 000000000000009c 0000000000000002
ffffffff80840000 a8000000fff2ffb0 0000000000000020 ffffffff8020e43c
a8000000fff2fcf8 ffffffff80a20000 0000000000000000 ffffffff808f2607
ffffffff8082b138 ffffffff8019cd1c 0000000000000030 ffffffff8082b138
0000000000000002 000000000000009c 0000000000000000 0000000000000000
0000000000000000 a8000000fff2fc40 0000000000000000 ffffffff8044dbf4
0000000000000000 0000000000000000 0000000000000000 ffffffff8010c400
ffffffff80855bb0 ffffffff8010d008 0000000000000000 ffffffff8044dbf4
...
Call Trace:
[<ffffffff8010d008>] show_stack+0x90/0xb0
[<ffffffff8044dbf4>] dump_stack+0x84/0xe0
[<ffffffff8046d4ec>] check_preemption_disabled+0x10c/0x110
[<ffffffff8010c40c>] __show_regs+0x1e4/0x330
[<ffffffff8010d060>] show_registers+0x28/0xc0
[<ffffffff80110748>] do_ade+0xcc8/0xce0
[<ffffffff80105b84>] resume_userspace_check+0x0/0x10
This is possible because cpu_name_string() is used by __show_regs(),
which is used by both show_regs() and show_registers(). These two
functions are used by various exception handling functions, only some of
which ensure that interrupts or preemption is disabled.
However the following have interrupts explicitly enabled or not
explicitly disabled:
- do_reserved() (irqs enabled)
- do_ade() (irqs not disabled)
This can be hit by setting /sys/kernel/debug/mips/unaligned_action to 2,
and triggering an address error exception, e.g. an unaligned access or
access to kernel segment from user mode.
To fix the above cases, use raw_smp_processor_id() instead. It is
unusual for CPU names to be different in the same system, and even if
they were, its possible the process has migrated between the exception
of interest and the cpu_name_string() call anyway.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12212/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
remove the usage of removed irq_to_gpio() function. On pre-DB1200
boards, pass the actual carddetect GPIO number instead of the IRQ,
because we need the gpio to actually test card status (inserted or
not) and can get the irq number with gpio_to_irq() instead.
Tested on DB1300 and DB1500, this patch fixes PCMCIA on the DB1500,
which used irq_to_gpio().
Fixes: 832f5dacfa ("MIPS: Remove all the uses of custom gpio.h")
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-pcmcia@lists.infradead.org
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Cc: stable@vger.kernel.org # v4.3+
Patchwork: https://patchwork.linux-mips.org/patch/12747/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The number of requestor lines was clamped to 0 for all pxa architectures
in the requestor declaration. Fix this by using the value.
Fixes: 72b195cb71 ("ARM: pxa: add the number of DMA requestor lines")
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
A few defconfig updates got dropped on the floor during the merge window,
so I've rounded up the remainder here:
* Fix duplicate definition of MMC_BLOCK_MINORS and bump to 32 for
msm8916
* CPUFreq support for the Juno platform, using the MHU/SCPI interface
* Removal of the default command line, which assumed a console called
ttyAMA0
* Bits and pieces for the Hi6220 (96Boards HiKey)
Signed-off-by: Will Deacon <will.deacon@arm.com>
To use the ARMv8 PMU related register defines from the KVM code, we move
the relevant definitions to asm/perf_event.h header file and rename them
with prefix ARMV8_PMU_. This allows us to get rid of kvm_perf_event.h.
Signed-off-by: Anup Patel <anup.patel@linaro.org>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Gerald Schaefer