RFC 4443 has defined two additional codes for ICMPv6 type 1 (destination
unreachable) messages:
5 - Source address failed ingress/egress policy
6 - Reject route to destination
Now they are treated as protocol error and icmpv6_err_convert() converts them
to EPROTO.
RFC 4443 says:
"Codes 5 and 6 are more informative subsets of code 1."
Treat codes 5 and 6 as code 1 (EACCES)
Btw, connect() returning -EPROTO confuses firefox, so that fallback to
other/IPv4 addresses does not work:
https://bugzilla.mozilla.org/show_bug.cgi?id=910773
Signed-off-by: Jiri Bohac <jbohac@suse.cz>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) There was a simplification in the ipv6 ndisc packet sending
attempted here, which avoided using memory accounting on the
per-netns ndisc socket for sending NDISC packets. It did fix some
important issues, but it causes regressions so it gets reverted here
too. Specifically, the problem with this change is that the IPV6
output path really depends upon there being a valid skb->sk
attached.
The reason we want to do this change in some form when we figure out
how to do it right, is that if a device goes down the ndisc_sk
socket send queue will fill up and block NDISC packets that we want
to send to other devices too. That's really bad behavior.
Hopefully Thomas can come up with a better version of this change.
2) Fix a severe TCP performance regression by reverting a change made
to dev_pick_tx() quite some time ago. From Eric Dumazet.
3) TIPC returns wrongly signed error codes, fix from Erik Hugne.
4) Fix OOPS when doing IPSEC over ipv4 tunnels due to orphaning the
skb->sk too early. Fix from Li Hongjun.
5) RAW ipv4 sockets can use the wrong routing key during lookup, from
Chris Clark.
6) Similar to #1 revert an older change that tried to use plain
alloc_skb() for SYN/ACK TCP packets, this broke the netfilter owner
mark which needs to see the skb->sk for such frames. From Phil
Oester.
7) BNX2x driver bug fixes from Ariel Elior and Yuval Mintz,
specifically in the handling of virtual functions.
8) IPSEC path error propagations to sockets is not done properly when
we have v4 in v6, and v6 in v4 type rules. Fix from Hannes Frederic
Sowa.
9) Fix missing channel context release in mac80211, from Johannes Berg.
10) Fix network namespace handing wrt. SCM_RIGHTS, from Andy
Lutomirski.
11) Fix usage of bogus NAPI weight in jme, netxen, and ps3_gelic
drivers. From Michal Schmidt.
12) Hopefully a complete and correct fix for the genetlink dump locking
and module reference counting. From Pravin B Shelar.
13) sk_busy_loop() must do a cpu_relax(), from Eliezer Tamir.
14) Fix handling of timestamp offset when restoring a snapshotted TCP
socket. From Andrew Vagin.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits)
net: fec: fix time stamping logic after napi conversion
net: bridge: convert MLDv2 Query MRC into msecs_to_jiffies for max_delay
mISDN: return -EINVAL on error in dsp_control_req()
net: revert 8728c544a9 ("net: dev_pick_tx() fix")
Revert "ipv6: Don't depend on per socket memory for neighbour discovery messages"
ipv4 tunnels: fix an oops when using ipip/sit with IPsec
tipc: set sk_err correctly when connection fails
tcp: tcp_make_synack() should use sock_wmalloc
bridge: separate querier and query timer into IGMP/IPv4 and MLD/IPv6 ones
ipv6: Don't depend on per socket memory for neighbour discovery messages
ipv4: sendto/hdrincl: don't use destination address found in header
tcp: don't apply tsoffset if rcv_tsecr is zero
tcp: initialize rcv_tstamp for restored sockets
net: xilinx: fix memleak
net: usb: Add HP hs2434 device to ZLP exception table
net: add cpu_relax to busy poll loop
net: stmmac: fixed the pbl setting with DT
genl: Hold reference on correct module while netlink-dump.
genl: Fix genl dumpit() locking.
xfrm: Fix potential null pointer dereference in xdst_queue_output
...
Steffen Klassert says:
====================
This pull request fixes some issues that arise when 6in4 or 4in6 tunnels
are used in combination with IPsec, all from Hannes Frederic Sowa and a
null pointer dereference when queueing packets to the policy hold queue.
1) We might access the local error handler of the wrong address family if
6in4 or 4in6 tunnel is protected by ipsec. Fix this by addind a pointer
to the correct local_error to xfrm_state_afinet.
2) Add a helper function to always refer to the correct interpretation
of skb->sk.
3) Call skb_reset_inner_headers to record the position of the inner headers
when adding a new one in various ipv6 tunnels. This is needed to identify
the addresses where to send back errors in the xfrm layer.
4) Dereference inner ipv6 header if encapsulated to always call the
right error handler.
5) Choose protocol family by skb protocol to not call the wrong
xfrm{4,6}_local_error handler in case an ipv6 sockets is used
in ipv4 mode.
6) Partly revert "xfrm: introduce helper for safe determination of mtu"
because this introduced pmtu discovery problems.
7) Set skb->protocol on tcp, raw and ip6_append_data genereated skbs.
We need this to get the correct mtu informations in xfrm.
8) Fix null pointer dereference in xdst_queue_output.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge fixes from Andrew Morton:
"Five fixes.
err, make that six. let me try again"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
fs/ocfs2/super.c: Use bigger nodestr to accomodate 32-bit node numbers
memcg: check that kmem_cache has memcg_params before accessing it
drivers/base/memory.c: fix show_mem_removable() to handle missing sections
IPC: bugfix for msgrcv with msgtyp < 0
Omnikey Cardman 4000: pull in ioctl.h in user header
timer_list: correct the iterator for timer_list
This file uses the ioctl helpers (_IOR/_IOW/etc...), so include ioctl.h
for the definitions.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Harald Welte <laforge@gnumonks.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This just replaces the dentry count/lock combination with the lockref
structure that contains both a count and a spinlock, and does the
mechanical conversion to use the lockref infrastructure.
There are no semantic changes here, it's purely syntactic. The
reference lockref implementation uses the spinlock exactly the same way
that the old dcache code did, and the bulk of this patch is just
expanding the internal "d_count" use in the dcache code to use
"d_lockref.count" instead.
This is purely preparation for the real change to make the reference
count updates be lockless during the 3.12 merge window.
[ As with the previous commit, this is a rewritten version of a concept
originally from Waiman, so credit goes to him, blame for any errors
goes to me.
Waiman's patch had some semantic differences for taking advantage of
the lockless update in dget_parent(), while this patch is
intentionally a pure search-and-replace change with no semantic
changes. - Linus ]
Signed-off-by: Waiman Long <Waiman.Long@hp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This introduces a new "lockref" structure that supports the concept of
lockless updates of reference counts that still honor an attached
spinlock.
NOTE! This reference implementation is not the optimized lockless
version, rather it is the fallback implementation using standard
spinlocks. The actual optimized versions will be merged into 3.12, but
I wanted to get the infrastructure in place and document the new
interfaces.
[ Also note that this particular commit is drastically cut-down minimal
version of the original patch by Waiman. In order to properly credit
the original author I'm marking Waiman as the author here, but in the
end this patch bears little resemblance to the patch by Waiman. So
blame any errors on me editing things down to the point where I can
introduce the infrastructure before the merge window for 3.12 actually
opens. - Linus ]
Signed-off-by: Waiman Long <Waiman.Long@hp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a cpu_relaxt to sk_busy_loop.
Julie Cummings reported performance issues when hyperthreading is on.
Arjan van de Ven observed that we should have a cpu_relax() in the
busy poll loop.
Reported-by: Julie Cummings <julie.a.cummings@intel.com>
Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
netlink dump operations take module as parameter to hold
reference for entire netlink dump duration.
Currently it holds ref only on genl module which is not correct
when we use ops registered to genl from another module.
Following patch adds module pointer to genl_ops so that netlink
can hold ref count on it.
CC: Jesse Gross <jesse@nicira.com>
CC: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
John W. Linville says:
====================
This is one more set of fixes intended for the 3.11 stream...
For the mac80211 bits, Johannes says:
"I have three more patches for the 3.11 stream: Felix's fix for the
fairly visible brcmsmac crash, a fix from Simon for an IBSS join bug I
found and a fix for a channel context bug in IBSS I'd introduced."
Along with those...
Sujith Manoharan makes a minor change to not use a PLL hang workaroun
for AR9550. This one-liner fixes a couple of bugs reported in the Red Hat
bugzilla.
Helmut Schaa addresses an ath9k_htc bug that mangles frame headers
during Tx. This fix is small, tested by the bug reported and isolated
to ath9k_htc.
Stanislaw Gruszka reverts a recent iwl4965 change that broke rfkill
notification to user space.
Please let me know if there are problems!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
nsproxy.pid_ns is *not* the task's pid namespace. The name should clarify
that.
This makes it more obvious that setns on a pid namespace is weird --
it won't change the pid namespace shown in procfs.
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Two changes here:
- Fix a bug in the rbtree code which could cause it to create two
different cache entries for the same register by adding a single
register at a time to the cache. This isn't awesome for performance
but it's non-invasive which we need for this late in the release
cycle and the I/O costs we're trying to avoid are high.
- Add another header used in the !CONFIG_REGMAP stubs where we had been
relying on implicit inclusion.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=8r8F
-----END PGP SIGNATURE-----
Merge tag 'regmap-v3.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fixes from Mark Brown:
"Two changes here:
- Fix a bug in the rbtree code which could cause it to create two
different cache entries for the same register by adding a single
register at a time to the cache. This isn't awesome for
performance but it's non-invasive which we need for this late in
the release cycle and the I/O costs we're trying to avoid are high.
- Add another header used in the !CONFIG_REGMAP stubs where we had
been relying on implicit inclusion"
* tag 'regmap-v3.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: rbtree: Fix overlapping rbnodes.
regmap: Add another missing header for !CONFIG_REGMAP stubs
In commit 0ea9d5e3e0 ("xfrm: introduce
helper for safe determination of mtu") I switched the determination of
ipv4 mtus from dst_mtu to ip_skb_dst_mtu. This was an error because in
case of IP_PMTUDISC_PROBE we fall back to the interface mtu, which is
never correct for ipv4 ipsec.
This patch partly reverts 0ea9d5e3e0
("xfrm: introduce helper for safe determination of mtu").
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Pull vfs fixes from Al Viro:
"Assorted fixes from the last week or so"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
VFS: collect_mounts() should return an ERR_PTR
bfs: iget_locked() doesn't return an ERR_PTR
efs: iget_locked() doesn't return an ERR_PTR()
proc: kill the extra proc_readfd_common()->dir_emit_dots()
cope with potentially long ->d_dname() output for shmem/hugetlb
This is a set of small bug fixes for lpfc and zfcp and a fix for a fairly
nasty bug in sg where a process which cancels I/O completes in a kernel thread
which would then try to write back to the now gone userspace and end up
writing to a random kernel address instead.
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iQEcBAABAgAGBQJSGIaHAAoJEDeqqVYsXL0MbPUH/3UXceHlgYRrwYZ0C10Ao5XB
WA8RWsDsX9UJxG68zEd8ED1aRHhmkfm4pEdMQ8DHW7+B7mvNhpb6mF0wxvmS5aIj
OVI0G+3KmghA3aDWbTtg8ED0wJ4q3ftcyzl4Fhpat+yA4g/BW7iJNDCv17nvZ90f
hNmdGm23wuYCid7JWNDO79spSp0q6wPJhG6ynJYOtzX1GvpEliZiGB0IOR3K44nW
cF6+Uigs3+6RGXX9UHOMrk9Ug3YFHfok224vvydcbRXVh8uneB8RQ6tziJVFI8tE
WPgAv2oDzly8l+ku71CqrjzG7fSwCr9Urlog9cEugE1iUmFCIQm6xJcSSnGJqaY=
=jKT6
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a set of small bug fixes for lpfc and zfcp and a fix for a
fairly nasty bug in sg where a process which cancels I/O completes in
a kernel thread which would then try to write back to the now gone
userspace and end up writing to a random kernel address instead"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
[SCSI] zfcp: remove access control tables interface (keep sysfs files)
[SCSI] zfcp: fix schedule-inside-lock in scsi_device list loops
[SCSI] zfcp: fix lock imbalance by reworking request queue locking
[SCSI] sg: Fix user memory corruption when SG_IO is interrupted by a signal
[SCSI] lpfc: Don't force CONFIG_GENERIC_CSUM on
dynamic_dname() is both too much and too little for those - the
output may be well in excess of 64 bytes dynamic_dname() assumes
to be enough (thanks to ashmem feeding really long names to
shmem_file_setup()) and vsnprintf() is an overkill for those
guys.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Merge networking fixes from David Miller:
1) Revert Johannes Berg's genetlink locking fix, because it causes
regressions.
Johannes and Pravin Shelar are working on fixing things properly.
2) Do not drop ipv6 ICMP messages without a redirected header option,
they are legal. From Duan Jiong.
3) Missing error return propagation in probing of via-ircc driver.
From Alexey Khoroshilov.
4) Do not clear out broadcast/multicast/unicast/WOL bits in r8169 when
initializing, from Peter Wu.
5) realtek phy driver programs wrong interrupt status bit, from
Giuseppe CAVALLARO.
6) Fix statistics regression in AF_PACKET code, from Willem de Bruijn.
7) Bridge code uses wrong bitmap length, from Toshiaki Makita.
8) SFC driver uses wrong indexes to look up MAC filters, from Ben
Hutchings.
9) Don't pass stack buffers into usb control operations in hso driver,
from Daniel Gimpelevich.
10) Multiple ipv6 fragmentation headers in one packet is illegal and
such packets should be dropped, from Hannes Frederic Sowa.
11) When TCP sockets are "repaired" as part of checkpoint/restart, the
timestamp field of SKBs need to be refreshed otherwise RTOs can be
wildly off. From Andrey Vagin.
12) Fix memcpy args (uses 'address of pointer' instead of 'pointer') in
hostp driver. From Dan Carpenter.
13) nl80211hdr_put() doesn't return an ERR_PTR, but some code believes
it does. From Dan Carpenter.
14) Fix regression in wireless SME disconnects, from Johannes Berg.
15) Don't use a stack buffer for DMA in zd1201 USB wireless driver, from
Jussi Kivilinna.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (33 commits)
ipv4: expose IPV4_DEVCONF
ipv6: handle Redirect ICMP Message with no Redirected Header option
be2net: fix disabling TX in be_close()
Revert "genetlink: fix family dump race"
hso: Fix stack corruption on some architectures
hso: Earlier catch of error condition
sfc: Fix lookup of default RX MAC filters when steered using ethtool
bridge: Use the correct bit length for bitmap functions in the VLAN code
packet: restore packet statistics tp_packets to include drops
net: phy: rtl8211: fix interrupt on status link change
r8169: remember WOL preferences on driver load
via-ircc: don't return zero if via_ircc_open() failed
macvtap: Ignore tap features when VNET_HDR is off
macvtap: Correctly set tap features when IFF_VNET_HDR is disabled.
macvtap: simplify usage of tap_features
tcp: set timestamps for restored skb-s
bnx2x: set VF DMAE when first function has 0 supported VFs
bnx2x: Protect against VFs' ndos when SR-IOV is disabled
bnx2x: prevent VF benign attentions
bnx2x: Consider DCBX remote error
...
IP sends device configuration (see inet_fill_link_af) as an array
in the netlink information, but the indices in that array are not
exposed to userspace through any current santized header file.
It was available back in 2.6.32 (in /usr/include/linux/sysctl.h)
but was broken by:
commit 02291680ff
Author: Eric W. Biederman <ebiederm@xmission.com>
Date: Sun Feb 14 03:25:51 2010 +0000
net ipv4: Decouple ipv4 interface parameters from binary sysctl numbers
Eric was solving the sysctl problem but then the indices were re-exposed
by a later addition of devconf support for IPV4
commit 9f0f7272ac
Author: Thomas Graf <tgraf@infradead.org>
Date: Tue Nov 16 04:32:48 2010 +0000
ipv4: AF_INET link address family
Putting them in /usr/include/linux/ip.h seemed the logical match
for the DEVCONF_ definitions for IPV6 in /usr/include/linux/ip6.h
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
rfc 4861 says the Redirected Header option is optional, so
the kernel should not drop the Redirect Message that has no
Redirected Header option. In this patch, the function
ip6_redirect_no_header() is introduced to deal with that
condition.
Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
This is the updated version of df54d6fa54 ("x86 get_unmapped_area():
use proper mmap base for bottom-up direction") that only randomizes the
mmap base address once.
Signed-off-by: Radu Caragea <sinaelgl@gmail.com>
Reported-and-tested-by: Jeff Shorey <shoreyjeff@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michel Lespinasse <walken@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Adrian Sendroiu <molecula2788@gmail.com>
Cc: Greg KH <greg@kroah.com>
Cc: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit df54d6fa54.
The commit isn't necessarily wrong, but because it recalculates the
random mmap_base every time, it seems to confuse user memory allocators
that expect contiguous mmap allocations even when the mmap address isn't
specified.
In particular, the MATLAB Java runtime seems to be unhappy. See
https://bugzilla.kernel.org/show_bug.cgi?id=60774
So we'll want to apply the random offset only once, and Radu has a patch
for that. Revert this older commit in order to apply the other one.
Reported-by: Jeff Shorey <shoreyjeff@gmail.com>
Cc: Radu Caragea <sinaelgl@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch adds wait_event_interruptible_lock_irq_timeout(), which is a
straight-forward descendant of wait_event_interruptible_timeout() and
wait_event_interruptible_lock_irq().
The zfcp driver used to call wait_event_interruptible_timeout()
in combination with some intricate and error-prone locking. Using
wait_event_interruptible_lock_irq_timeout() as a replacement
nicely cleans up that locking.
This rework removes a situation that resulted in a locking imbalance
in zfcp_qdio_sbal_get():
BUG: workqueue leaked lock or atomic: events/1/0xffffff00/10
last function: zfcp_fc_wka_port_offline+0x0/0xa0 [zfcp]
It was introduced by commit c2af7545aa
"[SCSI] zfcp: Do not wait for SBALs on stopped queue", which had a new
code path related to ZFCP_STATUS_ADAPTER_QDIOUP that took an early exit
without a required lock being held. The problem occured when a
special, non-SCSI I/O request was being submitted in process context,
when the adapter's queues had been torn down. In this case the bug
surfaced when the Fibre Channel port connection for a well-known address
was closed during a concurrent adapter shut-down procedure, which is a
rare constellation.
This patch also fixes these warnings from the sparse tool (make C=1):
drivers/s390/scsi/zfcp_qdio.c:224:12: warning: context imbalance in
'zfcp_qdio_sbal_check' - wrong count at exit
drivers/s390/scsi/zfcp_qdio.c:244:5: warning: context imbalance in
'zfcp_qdio_sbal_get' - unexpected unlock
Last but not least, we get rid of that crappy lock-unlock-lock
sequence at the beginning of the critical section.
It is okay to call zfcp_erp_adapter_reopen() with req_q_lock held.
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Peschke <mpeschke@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org #2.6.35+
Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
brcm80211 cannot handle sending frames with CCK rates as part of an
A-MPDU session. Other drivers may have issues too. Set the flag in all
drivers that have been tested with CCK rates.
This fixes a reported brcmsmac regression introduced in
commit ef47a5e4f1
"mac80211/minstrel_ht: fix cck rate sampling"
Cc: stable@vger.kernel.org # 3.10
Reported-by: Tom Gundersen <teg@jklm.no>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
It is not allowed for an ipv6 packet to contain multiple fragmentation
headers. So discard packets which were already reassembled by
fragmentation logic and send back a parameter problem icmp.
The updates for RFC 6980 will come in later, I have to do a bit more
research here.
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We need to choose the protocol family by skb->protocol. Otherwise we
call the wrong xfrm{4,6}_local_error handler in case an ipv6 sockets is
used in ipv4 mode, in which case we should call down to xfrm4_local_error
(ip6 sockets are a superset of ip4 ones).
We are called before before ip_output functions, so skb->protocol is
not reset.
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Pull networking fixes from David Miller:
1) Fix SKB leak in 8139cp, from Dave Jones.
2) Fix use of *_PAGES interfaces with mlx5 firmware, from Moshe Lazar.
3) RCU conversion of macvtap introduced two races, fixes by Eric
Dumazet
4) Synchronize statistic flows in bnx2x driver to prevent corruption,
from Dmitry Kravkov
5) Undo optimization in IP tunneling, we were using the inner IP header
in some cases to inherit the IP ID, but that isn't correct in some
circumstances. From Pravin B Shelar
6) Use correct struct size when parsing netlink attributes in
rtnl_bridge_getlink(). From Asbjoern Sloth Toennesen
7) Length verifications in tun_get_user() are bogus, from Weiping Pan
and Dan Carpenter
8) Fix bad merge resolution during 3.11 networking development in
openvswitch, albeit a harmless one which added some unreachable
code. From Jesse Gross
9) Wrong size used in flexible array allocation in openvswitch, from
Pravin B Shelar
10) Clear out firmware capability flags the be2net driver isn't ready to
handle yet, from Sarveshwar Bandi
11) Revert DMA mapping error checking addition to cxgb3 driver, it's
buggy. From Alexey Kardashevskiy
12) Fix regression in packet scheduler rate limiting when working with a
link layer of ATM. From Jesper Dangaard Brouer
13) Fix several errors in TCP Cubic congestion control, in particular
overflow errors in timestamp calculations. From Eric Dumazet and
Van Jacobson
14) In ipv6 routing lookups, we need to backtrack if subtree traversal
don't result in a match. From Hannes Frederic Sowa
15) ipgre_header() returns incorrect packet offset. Fix from Timo Teräs
16) Get "low latency" out of the new MIB counter names. From Eliezer
Tamir
17) State check in ndo_dflt_fdb_del() is inverted, from Sridhar
Samudrala
18) Handle TCP Fast Open properly in netfilter conntrack, from Yuchung
Cheng
19) Wrong memcpy length in pcan_usb driver, from Stephane Grosjean
20) Fix dealock in TIPC, from Wang Weidong and Ding Tianhong
21) call_rcu() call to destroy SCTP transport is done too early and
might result in an oops. From Daniel Borkmann
22) Fix races in genetlink family dumps, from Johannes Berg
23) Flags passed into macvlan by the user need to be validated properly,
from Michael S Tsirkin
24) Fix skge build on 32-bit, from Stephen Hemminger
25) Handle malformed TCP headers properly in xt_TCPMSS, from Pablo Neira
Ayuso
26) Fix handling of stacked vlans in vlan_dev_real_dev(), from Nikolay
Aleksandrov
27) Eliminate MTU calculation overflows in esp{4,6}, from Daniel
Borkmann
28) neigh_parms need to be setup before calling the ->ndo_neigh_setup()
method. From Veaceslav Falico
29) Kill out-of-bounds prefetch in fib_trie, from Eric Dumazet
30) Don't dereference MLD query message if the length isn't value in the
bridge multicast code, from Linus Lüssing
31) Fix VXLAN IGMP join regression due to an inverted check, from Cong
Wang
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (70 commits)
net/mlx5_core: Support MANAGE_PAGES and QUERY_PAGES firmware command changes
tun: signedness bug in tun_get_user()
qlcnic: Fix diagnostic interrupt test for 83xx adapters
qlcnic: Fix beacon state return status handling
qlcnic: Fix set driver version command
net: tg3: fix NULL pointer dereference in tg3_io_error_detected and tg3_io_slot_reset
net_sched: restore "linklayer atm" handling
drivers/net/ethernet/via/via-velocity.c: update napi implementation
Revert "cxgb3: Check and handle the dma mapping errors"
be2net: Clear any capability flags that driver is not interested in.
openvswitch: Reset tunnel key between input and output.
openvswitch: Use correct type while allocating flex array.
openvswitch: Fix bad merge resolution.
tun: compare with 0 instead of total_len
rtnetlink: rtnl_bridge_getlink: Call nlmsg_find_attr() with ifinfomsg header
ethernet/arc/arc_emac - fix NAPI "work > weight" warning
ip_tunnel: Do not use inner ip-header-id for tunnel ip-header-id.
bnx2x: prevent crash in shutdown flow with CNIC
bnx2x: fix PTE write access error
bnx2x: fix memory leak in VF
...
Ben Tebulin reported:
"Since v3.7.2 on two independent machines a very specific Git
repository fails in 9/10 cases on git-fsck due to an SHA1/memory
failures. This only occurs on a very specific repository and can be
reproduced stably on two independent laptops. Git mailing list ran
out of ideas and for me this looks like some very exotic kernel issue"
and bisected the failure to the backport of commit 53a59fc67f ("mm:
limit mmu_gather batching to fix soft lockups on !CONFIG_PREEMPT").
That commit itself is not actually buggy, but what it does is to make it
much more likely to hit the partial TLB invalidation case, since it
introduces a new case in tlb_next_batch() that previously only ever
happened when running out of memory.
The real bug is that the TLB gather virtual memory range setup is subtly
buggered. It was introduced in commit 597e1c3580 ("mm/mmu_gather:
enable tlb flush range in generic mmu_gather"), and the range handling
was already fixed at least once in commit e6c495a96c ("mm: fix the TLB
range flushed when __tlb_remove_page() runs out of slots"), but that fix
was not complete.
The problem with the TLB gather virtual address range is that it isn't
set up by the initial tlb_gather_mmu() initialization (which didn't get
the TLB range information), but it is set up ad-hoc later by the
functions that actually flush the TLB. And so any such case that forgot
to update the TLB range entries would potentially miss TLB invalidates.
Rather than try to figure out exactly which particular ad-hoc range
setup was missing (I personally suspect it's the hugetlb case in
zap_huge_pmd(), which didn't have the same logic as zap_pte_range()
did), this patch just gets rid of the problem at the source: make the
TLB range information available to tlb_gather_mmu(), and initialize it
when initializing all the other tlb gather fields.
This makes the patch larger, but conceptually much simpler. And the end
result is much more understandable; even if you want to play games with
partial ranges when invalidating the TLB contents in chunks, now the
range information is always there, and anybody who doesn't want to
bother with it won't introduce subtle bugs.
Ben verified that this fixes his problem.
Reported-bisected-and-tested-by: Ben Tebulin <tebulin@googlemail.com>
Build-testing-by: Stephen Rothwell <sfr@canb.auug.org.au>
Build-testing-by: Richard Weinberger <richard.weinberger@gmail.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In the previous QUERY_PAGES command version we used one command to get the
required amount of boot, init and post init pages. The new version uses the
op_mod field to specify whether the query is for the required amount of boot,
init or post init pages. In addition the output field size for the required
amount of pages increased from 16 to 32 bits.
In MANAGE_PAGES command the input_num_entries and output_num_entries fields
sizes changed from 16 to 32 bits and the PAS tables offset changed to 0x10.
In the pages request event the num_pages field also changed to 32 bits.
In the HCA-capabilities-layout the size and location of max_qp_mcg field has
been changed to support 24 bits.
This patch isn't compatible with firmware versions < 5; however, it turns out that the
first GA firmware we will publish will not support previous versions so this should be OK.
Signed-off-by: Moshe Lazer <moshel@mellanox.com>
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The use of WARN_ON() needs the definitions from bug.h, without it
you can get:
include/linux/regmap.h: In function 'regmap_write':
include/linux/regmap.h:525:2: error: implicit declaration of function 'WARN_ONCE' [-Werror=implicit-function-declaration]
Signed-off-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
Cc: stable@vger.kernel.org
commit 56b765b79 ("htb: improved accuracy at high rates")
broke the "linklayer atm" handling.
tc class add ... htb rate X ceil Y linklayer atm
The linklayer setting is implemented by modifying the rate table
which is send to the kernel. No direct parameter were
transferred to the kernel indicating the linklayer setting.
The commit 56b765b79 ("htb: improved accuracy at high rates")
removed the use of the rate table system.
To keep compatible with older iproute2 utils, this patch detects
the linklayer by parsing the rate table. It also supports future
versions of iproute2 to send this linklayer parameter to the
kernel directly. This is done by using the __reserved field in
struct tc_ratespec, to convey the choosen linklayer option, but
only using the lower 4 bits of this field.
Linklayer detection is limited to speeds below 100Mbit/s, because
at high rates the rtab is gets too inaccurate, so bad that
several fields contain the same values, this resembling the ATM
detect. Fields even start to contain "0" time to send, e.g. at
1000Mbit/s sending a 96 bytes packet cost "0", thus the rtab have
been more broken than we first realized.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge a bunch of fixes from Andrew Morton.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
fs/proc/task_mmu.c: fix buffer overflow in add_page_map()
arch: *: Kconfig: add "kernel/Kconfig.freezer" to "arch/*/Kconfig"
ocfs2: fix null pointer dereference in ocfs2_dir_foreach_blk_id()
x86 get_unmapped_area(): use proper mmap base for bottom-up direction
ocfs2: fix NULL pointer dereference in ocfs2_duplicate_clusters_by_page
ocfs2: Revert 40bd62e to avoid regression in extended allocation
drivers/rtc/rtc-stmp3xxx.c: provide timeout for potentially endless loop polling a HW bit
hugetlb: fix lockdep splat caused by pmd sharing
aoe: adjust ref of head for compound page tails
microblaze: fix clone syscall
mm: save soft-dirty bits on file pages
mm: save soft-dirty bits on swapped pages
memcg: don't initialize kmem-cache destroying work for root caches
skb->sk socket can be of AF_INET or AF_INET6 address family. Thus we
always have to make sure we a referring to the correct interpretation
of skb->sk.
We only depend on header defines to query the mtu, so we don't introduce
a new dependency to ipv6 by this change.
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
In xfrm4 and xfrm6 we need to take care about sockets of the other
address family. This could happen because a 6in4 or 4in6 tunnel could
get protected by ipsec.
Because we don't want to have a run-time dependency on ipv6 when only
using ipv4 xfrm we have to embed a pointer to the correct local_error
function in xfrm_state_afinet and look it up when returning an error
depending on the socket address family.
Thanks to vi0ss for the great bug report:
<https://bugzilla.kernel.org/show_bug.cgi?id=58691>
v2:
a) fix two more unsafe interpretations of skb->sk as ipv6 socket
(xfrm6_local_dontfrag and __xfrm6_output)
v3:
a) add an EXPORT_SYMBOL_GPL(xfrm_local_error) to fix a link error when
building ipv6 as a module (thanks to Steffen Klassert)
Reported-by: <vi0oss@gmail.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
When the stack is set to unlimited, the bottomup direction is used for
mmap-ings but the mmap_base is not used and thus effectively renders
ASLR for mmapings along with PIE useless.
Cc: Michel Lespinasse <walken@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Sendroiu <molecula2788@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix inadvertent breakage in the clone syscall ABI for Microblaze that
was introduced in commit f3268edbe6 ("microblaze: switch to generic
fork/vfork/clone").
The Microblaze syscall ABI for clone takes the parent tid address in the
4th argument; the third argument slot is used for the stack size. The
incorrectly-used CLONE_BACKWARDS type assigned parent tid to the 3rd
slot.
This commit restores the original ABI so that existing userspace libc
code will work correctly.
All kernel versions from v3.8-rc1 were affected.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andy reported that if file page get reclaimed we lose the soft-dirty bit
if it was there, so save _PAGE_BIT_SOFT_DIRTY bit when page address get
encoded into pte entry. Thus when #pf happens on such non-present pte
we can restore it back.
Reported-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Pavel Emelyanov <xemul@parallels.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andy Lutomirski reported that if a page with _PAGE_SOFT_DIRTY bit set
get swapped out, the bit is getting lost and no longer available when
pte read back.
To resolve this we introduce _PTE_SWP_SOFT_DIRTY bit which is saved in
pte entry for the page being swapped out. When such page is to be read
back from a swap cache we check for bit presence and if it's there we
clear it and restore the former _PAGE_SOFT_DIRTY bit back.
One of the problem was to find a place in pte entry where we can save
the _PTE_SWP_SOFT_DIRTY bit while page is in swap. The _PAGE_PSE was
chosen for that, it doesn't intersect with swap entry format stored in
pte.
Reported-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Pavel Emelyanov <xemul@parallels.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull scheduler fixes from Ingo Molnar:
"Docbook fixes that make 99% of the diffstat, plus a oneliner fix"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Ensure update_cfs_shares() is called for parents of continuously-running tasks
sched: Fix some kernel-doc warnings
Using inner-id for tunnel id is not safe in some rare cases.
E.g. packets coming from multiple sources entering same tunnel
can have same id. Therefore on tunnel packet receive we
could have packets from two different stream but with same
source and dst IP with same ip-id which could confuse ip packet
reassembly.
Following patch reverts optimization from commit
490ab08127 (IP_GRE: Fix IP-Identification.)
CC: Jarno Rajahalme <jrajahalme@nicira.com>
CC: Ansis Atteka <aatteka@nicira.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is only theoretical, but after try_to_wake_up(p) was changed
to check p->state under p->pi_lock the code like
__set_current_state(TASK_INTERRUPTIBLE);
schedule();
can miss a signal. This is the special case of wait-for-condition,
it relies on try_to_wake_up/schedule interaction and thus it does
not need mb() between __set_current_state() and if(signal_pending).
However, this __set_current_state() can move into the critical
section protected by rq->lock, now that try_to_wake_up() takes
another lock we need to ensure that it can't be reordered with
"if (signal_pending(current))" check inside that section.
The patch is actually one-liner, it simply adds smp_wmb() before
spin_lock_irq(rq->lock). This is what try_to_wake_up() already
does by the same reason.
We turn this wmb() into the new helper, smp_mb__before_spinlock(),
for better documentation and to allow the architectures to change
the default implementation.
While at it, kill smp_mb__after_lock(), it has no callers.
Perhaps we can also add smp_mb__before/after_spinunlock() for
prepare_to_wait().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Stable patch for lockd to fix Oopses due to inappropriate calls to
utsname()->nodename
- Stable patches for sunrpc to fix Oopses on shutdown when using
AF_LOCAL sockets with rpcbind
- Fix memory leak and error checking issues in nfs4_proc_lookup_mountpoint
- Fix a regression with the sync mount option failing to work for nfs4 mounts
- Fix a writeback performance issue when doing cache invalidation
- Remove an incorrect call to nfs_setsecurity in nfs_fhget
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)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=W12x
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-3.11-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
- Stable patch for lockd to fix Oopses due to inappropriate calls to
utsname()->nodename
- Stable patches for sunrpc to fix Oopses on shutdown when using
AF_LOCAL sockets with rpcbind
- Fix memory leak and error checking issues in nfs4_proc_lookup_mountpoint
- Fix a regression with the sync mount option failing to work for nfs4
mounts
- Fix a writeback performance issue when doing cache invalidation
- Remove an incorrect call to nfs_setsecurity in nfs_fhget
* tag 'nfs-for-3.11-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFSv4: Fix up nfs4_proc_lookup_mountpoint
NFS: Remove unnecessary call to nfs_setsecurity in nfs_fhget()
NFSv4: Fix the sync mount option for nfs4 mounts
NFS: Fix writeback performance issue on cache invalidation
SUNRPC: If the rpcbind channel is disconnected, fail the call to unregister
SUNRPC: Don't auto-disconnect from the local rpcbind socket
LOCKD: Don't call utsname()->nodename from nlmclnt_setlockargs
Here are 3 small fixes for staging/IIO drivers for 3.11-rc5. Nothing
huge, two IIO driver fixes, and a zcache fix. All of these have been in
linux-next for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEYEABECAAYFAlIFf+8ACgkQMUfUDdst+ylosQCgizsNrX32xvvUdK7xbQUx9SuZ
Gl4An097mknKhrqpfx2DJtRyq13tuyO/
=HMDZ
-----END PGP SIGNATURE-----
Merge tag 'staging-3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are 3 small fixes for staging/IIO drivers for 3.11-rc5. Nothing
huge, two IIO driver fixes, and a zcache fix. All of these have been
in linux-next for a while"
* tag 'staging-3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: zcache: fix "zcache=" kernel parameter
iio: ti_am335x_adc: Fix wrong samples received on 1st read
iio:trigger: Fix use_count race condition
- ACPI-based memory hotplug stopped working after a recent change,
because it's not possible to associate sufficiently many "physical"
devices with one ACPI device object due to an artificial limit.
Fix from Rafael J Wysocki removes that limit and makes memory
hotplug work again.
- A change made in 3.9 uncovered a bug in the ACPI processor driver
preventing NUMA nodes from being put offline due to an ordering
issue. Fix from Yasuaki Ishimatsu changes the ordering to make
things work again.
- One of the recent ACPI video commits (that hasn't been reverted
so far) uncovered a bug in the code handling quirky BIOSes that
caused some Asus machines to boot with backlight completely off
which made it quite difficult to use them afterward. Fix from
Felipe Contreras improves the quirk to cover this particular
case correctly.
- A cpufreq user space interface change made in 3.10 inadvertently
renamed the ignore_nice_load sysfs attribute to ignore_nice which
resulted in some confusion. Fix from Viresh Kumar changes the name
back to ignore_nice_load.
- An initialization ordering change made in 3.9 broke cpufreq on
loongson2 boards. Fix from Aaro Koskinen restores the correct
initialization ordering there.
- Fix breakage resulting from a mistake made in 3.9 and causing the
detection of some graphics adapters (that were detected correctly
before) to fail. There are two objects representing the same PCIe
port in the affected systems' ACPI tables and both appear as
"enabled" and we are expected to guess which one to use. We used
to choose the right one before by pure luck, but when we tried to
address another similar corner case, the luck went away. This time
we try to make our guessing a bit more educated which is reported
to work on those systems.
- The /proc/acpi/wakeup interface code is missing some locking
which may lead to breakage if that file is written or read during
hotplug of wakeup devices. That should be rare but still possible,
so it's better to start using the appropriate locking there.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=0u8M
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management fixes from Rafael Wysocki:
- ACPI-based memory hotplug stopped working after a recent change,
because it's not possible to associate sufficiently many "physical"
devices with one ACPI device object due to an artificial limit. Fix
from Rafael J Wysocki removes that limit and makes memory hotplug
work again.
- A change made in 3.9 uncovered a bug in the ACPI processor driver
preventing NUMA nodes from being put offline due to an ordering
issue. Fix from Yasuaki Ishimatsu changes the ordering to make
things work again.
- One of the recent ACPI video commits (that hasn't been reverted so
far) uncovered a bug in the code handling quirky BIOSes that caused
some Asus machines to boot with backlight completely off which made
it quite difficult to use them afterward. Fix from Felipe Contreras
improves the quirk to cover this particular case correctly.
- A cpufreq user space interface change made in 3.10 inadvertently
renamed the ignore_nice_load sysfs attribute to ignore_nice which
resulted in some confusion. Fix from Viresh Kumar changes the name
back to ignore_nice_load.
- An initialization ordering change made in 3.9 broke cpufreq on
loongson2 boards. Fix from Aaro Koskinen restores the correct
initialization ordering there.
- Fix breakage resulting from a mistake made in 3.9 and causing the
detection of some graphics adapters (that were detected correctly
before) to fail. There are two objects representing the same PCIe
port in the affected systems' ACPI tables and both appear as
"enabled" and we are expected to guess which one to use. We used to
choose the right one before by pure luck, but when we tried to
address another similar corner case, the luck went away. This time
we try to make our guessing a bit more educated which is reported to
work on those systems.
- The /proc/acpi/wakeup interface code is missing some locking which
may lead to breakage if that file is written or read during hotplug
of wakeup devices. That should be rare but still possible, so it's
better to start using the appropriate locking there.
* tag 'pm+acpi-3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: Try harder to resolve _ADR collisions for bridges
cpufreq: rename ignore_nice as ignore_nice_load
cpufreq: loongson2: fix regression related to clock management
ACPI / processor: move try_offline_node() after acpi_unmap_lsapic()
ACPI: Drop physical_node_id_bitmap from struct acpi_device
ACPI / PM: Walk physical_node_list under physical_node_lock
ACPI / video: improve quirk check in acpi_video_bqc_quirk()
Pull media fixes from Mauro Carvalho Chehab:
"Some driver fixes (em28xx, coda, usbtv, s5p, hdpvr and ml86v7667) and
a fix for media DocBook"
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] em28xx: fix assignment of the eeprom data
[media] hdpvr: fix iteration over uninitialized lists in hdpvr_probe()
[media] usbtv: fix dependency
[media] usbtv: Throw corrupted frames away
[media] usbtv: Fix deinterlacing
[media] v4l2: added missing mutex.h include to v4l2-ctrls.h
[media] DocBook: upgrade media_api DocBook version to 4.2
[media] ml86v7667: fix compile warning: 'ret' set but not used
[media] s5p-g2d: Fix registration failure
[media] media: coda: Fix DT driver data pointer for i.MX27
[media] s5p-mfc: Fix input/output format reporting
Rename mib counter from "low latency" to "busy poll"
v1 also moved the counter to the ip MIB (suggested by Shawn Bohrer)
Eric Dumazet suggested that the current location is better.
So v2 just renames the counter to fit the new naming convention.
Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ensure that user_namespace->parent chain can't grow too much.
Currently we use the hardroded 32 as limit.
Reported-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Two things here, one is a fix for a nasty issue where we were failing to
sync the last register in a block when using raw writes and the other
fixes a missing header for the !REGMAP stubs so that we don't rely on
implicit includes in that case.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=OFAa
-----END PGP SIGNATURE-----
Merge tag 'regmap-v3.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fixes from Mark Brown:
"Two things here, one is a fix for a nasty issue where we were failing
to sync the last register in a block when using raw writes and the
other fixes a missing header for the !REGMAP stubs so that we don't
rely on implicit includes in that case"
* tag 'regmap-v3.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: Add missing header for !CONFIG_REGMAP stubs
regmap: cache: Make sure to sync the last register in a block
Jiri Bohac