Commit Graph

547 Commits

Author SHA1 Message Date
Al Viro 1b71fe2efa ceph analog of cifs build_path_from_dentry() race fix
... unfortunately, cifs bug got copied.  Fix is essentially the same.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-16 23:43:58 -04:00
Sage Weil d7f124f129 ceph: fix sync and dio writes across stripe boundaries
We were iterating across stripe boundaries properly, but not moving the
write buffer pointer forward.  This caused us to rewrite the same data
after the break.  Fix by adjusting the data pointer forward, and
recalculating the io and buffer alignment after the break.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-06-13 16:26:22 -07:00
Sage Weil 773e9b4426 ceph: fix page alignment corrections
dd if=/dev/urandom of=/mnt/fs_depot/dd10 bs=500 seek=8388 count=1
 dd if=/mnt/fs_depot/dd10 of=/root/dd10out bs=500 skip=8388 count=1

Reported-by: Henry C Chang <henry.cy.chang@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2011-06-13 16:26:10 -07:00
Sage Weil 0c1f91f271 ceph: unwind canceled flock state
If we request a lock and then abort (e.g., ^C), we need to send a matching
unlock request to the MDS to unwind our lock attempt to avoid indefinitely
blocking other clients.

Reported-by: Brian Chrisman <brchrisman@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2011-06-07 21:36:45 -07:00
Sage Weil 0e98728fa3 ceph: fix ENOENT logic in striped_read
Getting ENOENT is equivalent to reading 0 bytes.  Make that correction
before setting up the hit_stripe and was_short flags.

Fixes the following case:
 dd if=/dev/zero of=/mnt/fs_depot/dd3 bs=1 seek=1048576 count=0
 dd if=/mnt/fs_depot/dd3 of=/root/ddout1 skip=8 bs=500 count=2 iflag=direct

Reported-by: Henry C Chang <henry.cy.chang@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2011-06-07 21:34:16 -07:00
Sage Weil c3cd62839a ceph: fix short sync reads from the OSD
If we get a short read from the OSD because the object is small, we need to
zero the remainder of the buffer.  For O_DIRECT reads, the attempted range
is not trimmed to i_size by the VFS, so we were actually looping
indefinitely.

Fix by trimming by i_size, and the unconditionally zeroing the trailing
range.

Reported-by: Jeff Wu <cpwu@tnsoft.com.cn>
Signed-off-by: Sage Weil <sage@newdream.net>
2011-06-07 21:34:14 -07:00
Sage Weil 70b666c3b4 ceph: use ihold when we already have an inode ref
We should use ihold whenever we already have a stable inode ref, even
when we aren't holding i_lock.  This avoids adding new and unnecessary
locking dependencies.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-06-07 21:34:11 -07:00
Sage Weil db3540522e ceph: fix cap flush race reentrancy
In e9964c10 we change cap flushing to do a delicate dance because some
inodes on the cap_dirty list could be in a migrating state (got EXPORT but
not IMPORT) in which we couldn't actually flush and move from
dirty->flushing, breaking the while (!empty) { process first } loop
structure.  It worked for a single sync thread, but was not reentrant and
triggered infinite loops when multiple syncers came along.

Instead, move inodes with dirty to a separate cap_dirty_migrating list
when in the limbo export-but-no-import state, allowing us to go back to
the simple loop structure (which was reentrant).  This is cleaner and more
robust.

Audited the cap_dirty users and this looks fine:
list_empty(&ci->i_dirty_item) is still a reliable indicator of whether we
have dirty caps (which list we're on is irrelevant) and list_del_init()
calls still do the right thing.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-24 11:52:12 -07:00
Sage Weil 45e3d3eeb6 ceph: avoid inode lookup on nfs fh reconnect
If we get the inode from the MDS, we have a reference in req; don't do a
fresh lookup.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-24 11:52:06 -07:00
Sage Weil 3c454cf216 ceph: use LOOKUPINO to make unconnected nfs fh more reliable
If we are unable to locate an inode by ino, ask the MDS using the new
LOOKUPINO command.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-24 11:52:05 -07:00
Sage Weil 9d6fcb081a ceph: check return value for start_request in writepages
Since we pass the nofail arg, we should never get an error; BUG if we do.
(And fix the function to not return an error if __map_request fails.)

Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-19 11:25:05 -07:00
Sage Weil 6b4a3b517a ceph: remove useless check
rc is only ever 0 or negative in this method.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-19 11:25:05 -07:00
Sage Weil da39822c65 ceph: fix broken comparison in readdir loop
Both off and fi->offset are unsigned, so the difference is always >= 0.
Compare them directly instead of the sign of the difference.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-19 11:25:04 -07:00
Sage Weil 3540303f87 ceph: fix rare potential cap leak
If we grab new_cap, retake the lock, and find we already have a cap now
for the given mds, release new_cap.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-19 11:25:03 -07:00
Sage Weil ae59808301 ceph: use snprintf for dirstat content
We allocate a buffer for rstats if the dirstat option is enabled.  Use
snprintf.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-19 11:25:02 -07:00
Sage Weil 1b36698577 libceph: remove unused variable
Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-19 11:24:17 -07:00
Sage Weil 3b66378034 ceph: take reference on mds request r_unsafe_dir
We put ourselves on an inode list for the parent directory of metadata
operations so that an fsync on the directory will wait for metadata updates
to commit to disk.  We weren't holding a reference to that directory,
however, and under certain workloads (fsstress in this case) the directory
can go away.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-19 11:20:07 -07:00
Henry C Chang d3d0720d4a ceph: do not use i_wrbuffer_ref as refcount for Fb cap
We increments i_wrbuffer_ref when taking the Fb cap. This breaks
the dirty page accounting and causes looping in
__ceph_do_pending_vmtruncate, and ceph client hangs.

This bug can be reproduced occasionally by running blogbench.

Add a new field i_wb_ref to inode and dedicate it to Fb reference
counting.

Signed-off-by: Henry C Chang <henry.cy.chang@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-11 10:44:48 -07:00
Henry C Chang a26a185d27 ceph: fix list_add in ceph_put_snap_realm
Signed-off-by: Henry C Chang <henry.cy.chang@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-11 10:44:36 -07:00
Henry C Chang 7d8e18a69d ceph: print debug message before put mds session
The mds session, s, could be freed during ceph_put_mds_session.
Move dout before ceph_put_mds_session.

Signed-off-by: Henry C Chang <henry.cy.chang@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-11 10:44:34 -07:00
Sage Weil fca65b4ad7 ceph: do not call __mark_dirty_inode under i_lock
The __mark_dirty_inode helper now takes i_lock as of 250df6ed.  Fix the
one ceph callers that held i_lock (__ceph_mark_dirty_caps) to return the
flags value so that the callers can do it outside of i_lock.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-04 12:56:45 -07:00
Henry C Chang 8c71897be2 ceph: handle ceph_osdc_new_request failure in ceph_writepages_start
We should unlock the page and return -ENOMEM if ceph_osdc_new_request
failed.

Signed-off-by: Henry C Chang <henry_c_chang@tcloudcomputing.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-03 09:28:12 -07:00
Sage Weil 3772d26d87 ceph: use ihold() when i_lock is held
See 0444d76ae6.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-03 09:28:08 -07:00
Linus Torvalds 42933bac11 Merge branch 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6
* 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6:
  Fix common misspellings
2011-04-07 11:14:49 -07:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Linus Torvalds 50f3515828 Merge git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
* git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  libceph: Create a new key type "ceph".
  libceph: Get secret from the kernel keys api when mounting with key=NAME.
  ceph: Move secret key parsing earlier.
  libceph: fix null dereference when unregistering linger requests
  ceph: unlock on error in ceph_osdc_start_request()
  ceph: fix possible NULL pointer dereference
  ceph: flush msgr_wq during mds_client shutdown
2011-03-30 09:46:09 -07:00
Tommi Virtanen 8323c3aa74 ceph: Move secret key parsing earlier.
This makes the base64 logic be contained in mount option parsing,
and prepares us for replacing the homebew key management with the
kernel key retention service.

Signed-off-by: Tommi Virtanen <tommi.virtanen@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-29 12:11:16 -07:00
Dave Chinner 0444d76ae6 fs: don't use igrab() while holding i_lock
Fix the incorrect use of igrab() inside the i_lock in NFS and Ceph‥

If we are already holding the i_lock, we have a reference to the
inode so we can safely use ihold() to gain an extra reference. This
avoids hangs due to lock recursion on the i_lock now that the
inode_lock is gone and igrab() uses the i_lock itself.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-29 07:50:34 -07:00
Sage Weil ef550f6f4f ceph: flush msgr_wq during mds_client shutdown
The release method for mds connections uses a backpointer to the
mds_client, so we need to flush the workqueue of any pending work (and
ceph_connection references) prior to freeing the mds_client.  This fixes
an oops easily triggered under UML by

 while true ; do mount ... ; umount ... ; done

Also fix an outdated comment: the flush in ceph_destroy_client only flushes
OSD connections out.  This bug is basically an artifact of the ceph ->
ceph+libceph conversion.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-25 13:27:48 -07:00
Sage Weil 147851d2dc ceph: rename dentry_release -> d_release, fix comment
Just for consistency's sake.  Fix obsolete comment too.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-21 12:24:26 -07:00
Henry C Chang 49bcb93236 ceph: add request to the tail of unsafe write list
In sync_write_wait(), we assume that the newest request is at the
tail of unsafe write list. We should maintain the semantics here.

Signed-off-by: Henry C Chang <henry_c_chang@tcloudcomputing.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-21 12:24:25 -07:00
Henry C Chang 78a255654f ceph: remove request from unsafe list if it is canceled/timed out
This fixes the list corruption warning like this:

------------[ cut here ]------------
WARNING: at lib/list_debug.c:30 __list_add+0x68/0x81()
Hardware name: X8DTU
list_add corruption. prev->next should be next (ffff880618931250), but was (null). (prev=ffff880c188b9130).
Modules linked in: nfsd lockd nfs_acl auth_rpcgss exportfs ceph libceph libcrc32c sunrpc ipv6 fuse igb i2c_i801 ioatdma i2c_core iTCO_wdt iTCO_vendor_support joydev dca serio_raw usb_storage [last unloaded: scsi_wait_scan]
Pid: 10977, comm: smbd Tainted: G        W  2.6.32.23-170.Elaster.xendom0.fc12.x86_64 #1
Call Trace:
[<ffffffff8105753c>] warn_slowpath_common+0x7c/0x94
[<ffffffff810575ab>] warn_slowpath_fmt+0x41/0x43
[<ffffffff812351a3>] __list_add+0x68/0x81
[<ffffffffa014799d>] ceph_aio_write+0x614/0x8a2 [ceph]
[<ffffffff8111d2a0>] do_sync_write+0xe8/0x125
[<ffffffff81075a1f>] ? autoremove_wake_function+0x0/0x39
[<ffffffff811f21ec>] ? selinux_file_permission+0x5c/0xb3
[<ffffffff811e8521>] ? security_file_permission+0x16/0x18
[<ffffffff8111d864>] vfs_write+0xae/0x10b
[<ffffffff8111d91b>] sys_pwrite64+0x5a/0x76
[<ffffffff81012d32>] system_call_fastpath+0x16/0x1b
---[ end trace 08573eb9f07ff6f4 ]---

Signed-off-by: Henry C Chang <henry_c_chang@tcloudcomputing.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-21 12:24:24 -07:00
Sage Weil 80456f8672 ceph: move readahead default to fs/ceph from libceph
Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-21 12:24:23 -07:00
Yehuda Sadeh ad1fee96cb ceph: add ino32 mount option
The ino32 mount option forces the ceph fs to report 32 bit
ino values.  This is useful for 64 bit kernels with 32 bit userspace.

Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2011-03-21 12:24:22 -07:00
Sage Weil 21f3b5f1bb ceph: remove debugfs debug cruft
Whoops!

Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-21 12:24:20 -07:00
Sage Weil 09adc80c61 ceph: preserve I_COMPLETE across rename
d_move puts the renamed dentry at the end of d_subdirs, screwing with our
cached dentry directory offsets.  We were just clearing I_COMPLETE to avoid
any possibility of trouble.  However, assigning the renamed dentry an
offset at the end of the directory (to match it's new d_subdirs position)
is sufficient to maintain correct behavior and hold onto I_COMPLETE.

This is especially important for workloads like rsync, which renames files
into place.  Before, we would lose I_COMPLETE and do MDS lookups for each
file.  With this patch we only talk to the MDS on create and rename.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-15 09:14:03 -07:00
Al Viro 0eb980e317 ceph: fix d_revalidate oopsen on NFS exports
can't blindly check nd->flags in ->d_revalidate()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-03-10 03:44:05 -05:00
Sage Weil 455cec0abf ceph: no .snap inside of snapped namespace
Otherwise you can do things like

# mkdir .snap/foo
# cd .snap/foo/.snap
# ls
<badness>

Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-04 12:25:09 -08:00
Sage Weil 16a8b70a5a ceph: do not clear I_COMPLETE from d_release
First, this was racy anyway: d_release isn't called until well after the
dentry is unhashed.  Second, this runs afoul of the recent dcache change
that clears d_parent prior to calling d_release (949854d0), causing a NULL
pointer dereference.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-03 10:09:52 -08:00
Sage Weil b545cc1505 ceph: do not set I_COMPLETE
Do not set the I_COMPLETE flag on directories until we resolve races with
dcache pruning.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-03 10:09:51 -08:00
Sage Weil 9bde178d05 Revert "ceph: keep reference to parent inode on ceph_dentry"
This reverts commit 97d79b403e.

This fails to account for d_parent changes due to rename or disconnected
dentries due to submounts or NFS reexports.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-03 10:09:50 -08:00
Linus Torvalds 8bd89ca220 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: keep reference to parent inode on ceph_dentry
  ceph: queue cap_snaps once per realm
  libceph: fix socket write error handling
  libceph: fix socket read error handling
2011-02-21 15:01:38 -08:00
Yehuda Sadeh 97d79b403e ceph: keep reference to parent inode on ceph_dentry
When creating a new dentry we now hold a reference to the parent
inode in the ceph_dentry.  This is required due to the new RCU
changes from 949854d0, which set dentry->d_parent to NULL in d_kill before
calling the ->release() callback.  If/when that behavior is changed, we can
revert this hack.

Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
2011-02-19 19:59:14 -08:00
Sage Weil e8e1ba96b2 ceph: queue cap_snaps once per realm
We were forming a dirty list, and then queueing cap_snaps for each realm
_and_ its children, regardless of whether the children were already in the
dirty list.  This meant we did it twice for some realms.  Which in turn
meant we corrupted mdsc->snap_flush_list when the cap_snap was re-added to
the list it was already on, and could trigger an infinite loop.

We were also using recursion to do reach all the children, a no-no when
stack is limited.

Instead, (re)queue any children on the dirty list, avoiding processing
anything twice and avoiding any recursion.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-02-04 20:45:58 -08:00
Linus Torvalds b12ece7d85 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: avoid picking MDS that is not active
  ceph: avoid immediate cap check after import
  ceph: fix flushing of caps vs cap import
  ceph: fix erroneous cap flush to non-auth mds
  ceph: fix cap_wanted_delay_{min,max} mount option initialization
  ceph: fix xattr rbtree search
  ceph: fix getattr on directory when using norbytes
2011-01-28 12:12:58 +10:00
Sage Weil d66bbd441c ceph: avoid picking MDS that is not active
Ignore replication or auth frag data if it indicates an MDS that is not
active.  This can happen if the MDS shuts down and the client has stale
data about the namespace distribution across the MDS cluster.  If that's
the case, fall back to directing the request based on the auth cap (which
should always be accurate).

Signed-off-by: Sage Weil <sage@newdream.net>
2011-01-25 08:16:37 -08:00
Sage Weil 7e57b81c76 ceph: avoid immediate cap check after import
The NODELAY flag avoids the heuristics that delay cap (issued/wanted)
release.  There's no reason for that after we import a cap, and it kills
whatever benefit we get from those delays.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-01-19 09:23:26 -08:00
Sage Weil 088b3f5e9e ceph: fix flushing of caps vs cap import
If we are mid-flush and a cap is migrated to another node, we need to
resend the cap flush message to the new MDS, and do so with the original
flush_seq to avoid leaking across a sync boundary.  Previously we didn't
redo the flush (we only flushed newly dirty data), which would cause a
later sync to hang forever.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-01-19 09:23:25 -08:00
Sage Weil 24be0c4810 ceph: fix erroneous cap flush to non-auth mds
The int flushing is global and not clear on each iteration of the loop,
which can cause a second flush of caps to any MDSs with ids greater than
the auth.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-01-19 09:23:24 -08:00
Sage Weil 50aac4fec5 ceph: fix cap_wanted_delay_{min,max} mount option initialization
These were initialized to 0 instead of the default, fallout from the RBD
refactor in 3d14c5d2b6.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-01-19 09:23:22 -08:00