Alexandre Belloni says:
====================
net: lpc_eth: parse phy nodes from device tree
Allow describing connected phys using device tree. This solves issues finding
the phy on the mdio bus and allows decribing the interrupt line the phy is
possibly connected to.
Changes in v3:
- rebased on net-next
- collected Reviewed-by
Changes in v2:
- move the phy decription in the mdio subnode.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When connected to a micrel phy, phy_find_first doesn't work properly
because the first phy found is on address 0, the broadcast address but, the
first thing the phy driver is doing is disabling this broadcast address.
The phy is then available only on address 1 but the mdio driver doesn't
know about it.
Instead, register the mdio bus using of_mdiobus_register and try to find
the phy description in device tree before falling back to phy_find_first.
This ultimately also allows to describe the interrupt the phy is connected
to.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Ethernet controller is also an mdio controller, to be able to parse
children (phys for example), and mdio node must be present.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel says:
====================
selftests: mlxsw: Add scale tests for Spectrum-2
This series from Danielle adds two scale tests for the Spectrum-2 ASIC.
The first scale test (patches #1-#4) validates the number of mirroring
sessions (using tc-mirred) that can be supported by the device. As a
preparatory step, patch #1 exposes the maximum number and current usage
of mirroring agents via devlink-resource. This allows us to avoid
hard-coding the limits later in the test.
The second scale test (patch #5) validates the number of tc-flower
filters that can be supported by the device.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Return the maximum number of tc flower filters that can be offloaded.
Currently, this value corresponds to the number of counters supported by
the driver.
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add resource_scale test suitable for Spectrum-2.
Invoke the mirror_gre test and check that the advertised scale numbers
are indeed supported.
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Like in Spectrum, use the number of analyzers taken from the devlink
command.
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the number of analyzers taken from the devlink command, instead of
hard-coded value, in order to make the test more generic.
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The switch supports an enhanced switched port analyzer that enables
selecting network traffic for analysis by a network analyzer.
SPAN agents are configured and consumed whenever a tc filter is added
with a mirror action to a new destination. The destination can either be
a physical port (e.g., swp1), a VLAN device or a gretap.
Expose the maximum number of SPAN agents and their current usage to the
user.
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently there's a bug in the module subsystem [0] preventing load of
the PHY driver module on certain systems (as one symptom).
This results in a NPE on such systems for the following reason:
Instead of the correct PHY driver the genphy driver is loaded that
doesn't implement the read_page/write_page callbacks. Every call to
phy_read_paged() et al will result in a NPE therefore.
In parallel to fixing the root cause we should make sure that this one
and maybe similar issues in other subsystems don't result in a NPE
in phylib. So let's check for the callbacks before using them and warn
once if they are not available.
[0] https://marc.info/?t=157072642100001&r=1&w=2
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adjusting the hardware clock (PTPCLKVAL, PTPCLKADD, PTPCLKRATE) is a
requirement for the auxiliary PTP functionality of the switch
(TTEthernet, PPS input, PPS output).
Therefore we need to switch to using these registers to keep a
synchronized time in hardware, instead of the timecounter/cyclecounter
implementation, which is reliant on the free-running PTPTSCLK.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
bpf_xdp_adjust_head() can change the frame boundaries. Account for the
potential shift properly by calculating the new offset before
syncing the buffer to the device for XDP_TX
Fixes: ba2b232108 ("net: netsec: add XDP support")
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With threaded interrupts enabled, the interrupt thread runs as SCHED_RR
with priority 50. If a user application with a higher priority preempts
the interrupt thread and tries to shutdown the network interface then it
will loop forever. The kernel will spin in the loop waiting for the
device to become idle and the scheduler will never consider the
interrupt thread because its priority is lower.
Avoid the problem by sleeping for a jiffy giving other tasks,
including the interrupt thread, a chance to run and make progress.
In the original thread it has been suggested to use wait_event() and
properly waiting for the state to occur. DaveM explained that this would
require to add expensive checks in the fast paths of packet processing.
Link: https://lkml.kernel.org/r/1393976987-23555-1-git-send-email-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
[bigeasy: Rewrite commit message, add comment, use
schedule_timeout_uninterruptible()]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Null check before dma_pool_destroy is redundant, so remove it.
This is detected by coccinelle.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Increment netdev rx counters even for XDP_DROP verdict. Report even
tx bytes for xdp buffers (TYPE_NETSEC_XDP_TX or TYPE_NETSEC_XDP_NDO).
Moreover account pending buffer length in netsec_xdp_queue_one as it is
done for skb counterpart
Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
variable ret is not used after jumping to "unlock" label, so
the assignment is redundant.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rather than parsing the sfp firmware node in phylink, parse it in the
sfp-bus code, so we can re-use this code for PHYs without having to
duplicate the parsing.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch supports loading additional firmware file through
request_firmware().
A firmware file may include a header followed by several blocks
which have different types of firmware. Currently, the supported
types are RTL_FW_END, RTL_FW_PLA, and RTL_FW_USB.
The firmware is used to fix some compatible or hardware issues. For
example, the device couldn't be found after rebooting several times.
The supported chips are
RTL_VER_04 (rtl8153a-2.fw)
RTL_VER_05 (rtl8153a-3.fw)
RTL_VER_06 (rtl8153a-4.fw)
RTL_VER_09 (rtl8153b-2.fw)
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make sure that we completely quiesce the network device, including its
DMA to avoid having it continue to receive packets while there is no
software alive to service those.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use more linkmode_* helpers rather than open-coding the bitmap
operations.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Added TDC test cases for Ethernet LAYERED_OP operations:
- set single source Ethernet MAC
- set single destination Ethernet MAC
- set single invalid destination Ethernet MAC
- set Ethernet type
- invert source/destination/type fields
- add operation on Ethernet type field
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of having a hard failure and stopping the driver's probe
routine, generate a random Ethernet MAC address to keep going.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit eeb84aa0d0 ("net_sched: sch_fq: do not assume EDT
packets are ordered"), all skbs get a non zero time_to_send
in flow_queue_add()
This means @time_next_packet variable in fq_dequeue()
can no longer be zero.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 323ebb61e3 ("net: use listified RX for handling GRO_NORMAL
skbs") made use of listified skb processing for the users of
napi_gro_frags().
The same technique can be used in a way more common napi_gro_receive()
to speed up non-merged (GRO_NORMAL) skbs for a wide range of drivers
including gro_cells and mac80211 users.
This slightly changes the return value in cases where skb is being
dropped by the core stack, but it seems to have no impact on related
drivers' functionality.
gro_normal_batch is left untouched as it's very individual for every
single system configuration and might be tuned in manual order to
achieve an optimal performance.
Signed-off-by: Alexander Lobakin <alobakin@dlink.ru>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current code assumes PAGE_SIZE (the guest page size) is equal
to the page size used to communicate with Hyper-V (which is
always 4K). While this assumption is true on x86, it may not
be true for Hyper-V on other architectures. For example,
Linux on ARM64 may have PAGE_SIZE of 16K or 64K. A new symbol,
HV_HYP_PAGE_SIZE, has been previously introduced to use when
the Hyper-V page size is intended instead of the guest page size.
Make this code work on non-x86 architectures by using the new
HV_HYP_PAGE_SIZE symbol instead of PAGE_SIZE, where appropriate.
Also replace the now redundant PAGE_SIZE_4K with HV_HYP_PAGE_SIZE.
The change has no effect on x86, but lays the groundwork to run
on ARM64 and others.
Signed-off-by: Himadri Pandya <himadrispandya@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko says:
====================
mlxsw: Add support for 400Gbps (50Gbps per lane) link modes
Add 400Gbps bits to ethtool and introduce support in mlxsw. These modes
are supported by the Spectrum-2 switch ASIC.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend speed support with 400Gbps
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for 400Gbps speed, link modes of 50Gbps per lane
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use my kernel.org address for all entries in MAINTAINERS.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean says:
====================
Scatter/gather SPI for SJA1105 DSA
This is a small series that reduces the stack memory usage for the
sja1105 driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This reworks the SPI transfer implementation to make use of more of the
SPI core features. The main benefit is to avoid the memcpy in
sja1105_xfer_buf().
The memcpy was only needed because the function was transferring a
single buffer at a time. So it needed to copy the caller-provided buffer
at buf + 4, to store the SPI message header in the "headroom" area.
But the SPI core supports scatter-gather messages, comprised of multiple
transfers. We can actually use those to break apart every SPI message
into 2 transfers: one for the header and one for the actual payload.
To keep the behavior the same regarding the chip select signal, it is
necessary to tell the SPI core to de-assert the chip select after each
chunk. This was not needed before, because each spi_message contained
only 1 single transfer.
The meaning of the per-transfer cs_change=1 is:
- If the transfer is the last one of the message, keep CS asserted
- Otherwise, deassert CS
We need to deassert CS in the "otherwise" case, which was implicit
before.
Avoiding the memcpy creates yet another opportunity. The device can't
process more than 256 bytes of SPI payload at a time, so the
sja1105_xfer_long_buf() function used to exist, to split the larger
caller buffer into chunks.
But these chunks couldn't be used as scatter/gather buffers for
spi_message until now, because of that memcpy (we would have needed more
memory for each chunk). So we can now remove the sja1105_xfer_long_buf()
function and have a single implementation for long and short buffers.
Another benefit is lower usage of stack memory. Previously we had to
store 2 SPI buffers for each chunk. Due to the elimination of the
memcpy, we can now send pointers to the actual chunks from the
caller-supplied buffer to the SPI core.
Since the patch merges two functions into a rewritten implementation,
the function prototype was also changed, mainly for cosmetic consistency
with the structures used within it.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a cosmetic patch that reduces some boilerplate in the SPI
interaction of the driver.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The variable reg is being assigned a value that is never read
and is being re-assigned in the following for-loop. The
assignment is redundant and hence can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean says:
====================
PTP driver refactoring for SJA1105 DSA
This series creates a better separation between the driver core and the
PTP portion. Therefore, users who are not interested in PTP can get a
simpler and smaller driver by compiling it out.
This is in preparation for further patches: SPI transfer timestamping,
synchronizing the hardware clock (as opposed to keeping it
free-running), PPS input/output, etc.
====================
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The PTP command register contains enable bits for:
- Putting the 64-bit PTPCLKVAL register in add/subtract or write mode
- Taking timestamps off of the corrected vs free-running clock
- Starting/stopping the TTEthernet scheduling
- Starting/stopping PPS output
- Resetting the switch
When a command needs to be issued (e.g. "change the PTPCLKVAL from write
mode to add/subtract mode"), one cannot simply write to the command
register setting the PTPCLKADD bit to 1, because that would zeroize the
other settings. One also cannot do a read-modify-write (that would be
too easy for this hardware) because not all bits of the command register
are readable over SPI.
So this leaves us with the only option of keeping the value of the PTP
command register in the driver, and operating on that.
Actually there are 2 types of PTP operations now:
- Operations that modify the cached PTP command. These operate on
ptp_data->cmd as a pointer.
- Operations that apply all previously cached PTP settings, but don't
otherwise cache what they did themselves. The sja1105_ptp_reset
function is such an example. It copies the ptp_data->cmd on stack
before modifying and writing it to SPI.
This practically means that struct sja1105_ptp_cmd is no longer an
implementation detail, since it needs to be stored in full into struct
sja1105_ptp_data, and hence in struct sja1105_private. So the (*ptp_cmd)
function prototype can change and take struct sja1105_ptp_cmd as second
argument now.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a non-functional change with 2 goals (both for the case when
CONFIG_NET_DSA_SJA1105_PTP is not enabled):
- Reduce the size of the sja1105_private structure.
- Make the PTP code more self-contained.
Leaving priv->ptp_data.lock to be initialized in sja1105_main.c is not a
leftover: it will be used in a future patch "net: dsa: sja1105: Restore
PTP time after switch reset".
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The new rule (as already started for sja1105_tas.h) is for functions of
optional driver components (ones which may be disabled via Kconfig - PTP
and TAS) to take struct dsa_switch *ds instead of struct sja1105_private
*priv as first argument.
This is so that forward-declarations of struct sja1105_private can be
avoided.
So make sja1105_ptp.h the second user of this rule.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We need priv->ptp_caps to hold a structure and not just a pointer,
because we use container_of in the various PTP callbacks.
Therefore, the sja1105_ptp_caps structure declared in the global memory
of the driver serves no further purpose after copying it into
priv->ptp_caps.
So just populate priv->ptp_caps with the needed operations and remove
sja1105_ptp_caps.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2019-10-14
The following pull-request contains BPF updates for your *net-next* tree.
12 days of development and
85 files changed, 1889 insertions(+), 1020 deletions(-)
The main changes are:
1) auto-generation of bpf_helper_defs.h, from Andrii.
2) split of bpf_helpers.h into bpf_{helpers, helper_defs, endian, tracing}.h
and move into libbpf, from Andrii.
3) Track contents of read-only maps as scalars in the verifier, from Andrii.
4) small x86 JIT optimization, from Daniel.
5) cross compilation support, from Ivan.
6) bpf flow_dissector enhancements, from Jakub and Stanislav.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
* minstrel improvements from Felix
* a TX aggregation simplification
* some additional capabilities for hwsim
* minor cleanups & docs updates
-----BEGIN PGP SIGNATURE-----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=IJ7D
-----END PGP SIGNATURE-----
Merge tag 'mac80211-next-for-net-next-2019-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
A few more small things, nothing really stands out:
* minstrel improvements from Felix
* a TX aggregation simplification
* some additional capabilities for hwsim
* minor cleanups & docs updates
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit c10e6cf85e ("net: genetlink: push attrbuf allocation and parsing
to a separate function") moved attribute buffer allocation and attribute
parsing from genl_family_rcv_msg_doit() into a separate function
genl_family_rcv_msg_attrs_parse() which, unlike the previous code, calls
__nlmsg_parse() even if family->maxattr is 0 (i.e. the family does its own
parsing). The parser error is ignored and does not propagate out of
genl_family_rcv_msg_attrs_parse() but an error message ("Unknown attribute
type") is set in extack and if further processing generates no error or
warning, it stays there and is interpreted as a warning by userspace.
Dumpit requests are not affected as genl_family_rcv_msg_dumpit() bypasses
the call of genl_family_rcv_msg_attrs_parse() if family->maxattr is zero.
Move this logic inside genl_family_rcv_msg_attrs_parse() so that we don't
have to handle it in each caller.
v3: put the check inside genl_family_rcv_msg_attrs_parse()
v2: adjust also argument of genl_family_rcv_msg_attrs_free()
Fixes: c10e6cf85e ("net: genetlink: push attrbuf allocation and parsing to a separate function")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tcp_zerocopy_receive() rounds down the zc->length a multiple of
PAGE_SIZE. This results in two issues:
- tcp_zerocopy_receive sets recv_skip_hint to the length of the
receive queue if the zc->length input is smaller than the
PAGE_SIZE, even though the data in receive queue could be
zerocopied.
- tcp_zerocopy_receive would set recv_skip_hint of 0, in cases
where we have a little bit of data after the perfectly-sized
packets.
To fix these issues, do not store the rounded down value in
zc->length. Round down the length passed to zap_page_range(),
and return min(inq, zc->length) when the zap_range is 0.
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrii Nakryiko says:
====================
Patch #1 enforces libbpf build to have bpf_helper_defs.h ready before test BPF
programs are built.
Patch #2 drops obsolete BTF/pahole detection logic from Makefile.
v1->v2:
- drop CPU and PROBE (Martin).
====================
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Given lots of selftests won't work without recent enough Clang/LLVM that
fully supports BTF, there is no point in maintaining outdated BTF
support detection and fall-back to pahole logic. Just assume we have
everything we need.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191011220146.3798961-3-andriin@fb.com
Given BPF programs rely on libbpf's bpf_helper_defs.h, which is
auto-generated during libbpf build, libbpf build has to happen before
we attempt progs/*.c build. Enforce it as order-only dependency.
Fixes: 24f25763d6 ("libbpf: auto-generate list of BPF helper definitions")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191011220146.3798961-2-andriin@fb.com
Ivan Khoronzhuk says:
====================
This series contains mainly fixes/improvements for cross-compilation
but not only, tested for arm, arm64, and intended for any arch.
Also verified on native build (not cross compilation) for x86_64
and arm, arm64.
Initial RFC link:
https://lkml.org/lkml/2019/8/29/1665
Prev. version:
https://lkml.org/lkml/2019/10/9/1045
Besides the patches given here, the RFC also contains couple patches
related to llvm clang
arm: include: asm: swab: mask rev16 instruction for clang
arm: include: asm: unified: mask .syntax unified for clang
They are necessarily to verify arm 32 build.
Also, couple more fixes were added but are not merged in bpf-next yet,
they can be needed for verification/configuration steps, if not in
your tree the fixes can be taken here:
https://www.spinics.net/lists/netdev/msg601716.htmlhttps://www.spinics.net/lists/netdev/msg601714.htmlhttps://www.spinics.net/lists/linux-kbuild/msg23468.html
Now, to build samples, SAMPLE_BPF should be enabled in config.
The change touches not only cross-compilation and can have impact on
other archs and build environments, so might be good idea to verify
it in order to add appropriate changes, some warn options could be
tuned also.
All is tested on x86-64 with clang installed (has to be built containing
targets for arm, arm64..., see llc --version, usually it's present already)
Instructions to test native on x86_64
=================================================
Native build on x86_64 is done in usual way and shouldn't have difference
except HOSTCC is now printed as CC wile building the samples.
Instructions to test cross compilation on arm64
=================================================
gcc version 8.3.0
(GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36))
I've used sdk for TI am65x got here:
http://downloads.ti.com/processor-sdk-linux/esd/AM65X/latest/exports/\
ti-processor-sdk-linux-am65xx-evm-06.00.00.07-Linux-x86-Install.bin
make ARCH=arm64 -C tools/ clean
make ARCH=arm64 -C samples/bpf clean
make ARCH=arm64 clean
make ARCH=arm64 defconfig
make ARCH=arm64 headers_install
make ARCH=arm64 INSTALL_HDR_PATH=/../sdk/\
ti-processor-sdk-linux-am65xx-evm-06.00.00.07/linux-devkit/sysroots/\
aarch64-linux/usr headers_install
make samples/bpf/ ARCH=arm64 CROSS_COMPILE="aarch64-linux-gnu-"\
SYSROOT="/../sdk/ti-processor-sdk-linux-am65xx-evm-06.00.00.07/\
linux-devkit/sysroots/aarch64-linux"
Instructions to test cross compilation on arm
=================================================
arm-linux-gnueabihf-gcc (Linaro GCC 7.2-2017.11) 7.2.1 20171011
or
arm-linux-gnueabihf-gcc
(GNU Toolchain for the A-profile Architecture 8.3-2019.03 \
(arm-rel-8.36)) 8.3.0
http://downloads.ti.com/processor-sdk-linux/esd/AM57X/05_03_00_07/exports/\
ti-processor-sdk-linux-am57xx-evm-05.03.00.07-Linux-x86-Install.bin
make ARCH=arm -C tools/ clean
make ARCH=arm -C samples/bpf clean
make ARCH=arm clean
make ARCH=arm omap2plus_defconfig
make ARCH=arm headers_install
make ARCH=arm INSTALL_HDR_PATH=/../sdk/\
ti-processor-sdk-linux-am57xx-evm-05.03.00.07/linux-devkit/sysroots/\
armv7ahf-neon-linux-gnueabi/usr headers_install
make samples/bpf/ ARCH=arm CROSS_COMPILE="arm-linux-gnueabihf-"\
SYSROOT="/../sdk/ti-processor-sdk-linux-am57xx-evm-05.03\
.00.07/linux-devkit/sysroots/armv7ahf-neon-linux-gnueabi"
Based on bpf-next/master
v5..v4:
- any changes, only missed SOBs are added
v4..v3:
- renamed CLANG_EXTRA_CFLAGS on BPF_EXTRA_CFLAGS
- used filter for ARCH_ARM_SELECTOR
- omit "-fomit-frame-pointer" and use same flags for native and "cross"
- used sample/bpf prefixes
- use C instead of C++ compiler for test_libbpf target
v3..v2:
- renamed makefile.progs to makeifle.target, as more appropriate
- left only __LINUX_ARM_ARCH__ for D options for arm
- for host build - left options from KBUILD_HOST for compatibility reasons
- split patch adding c/cxx/ld flags to libbpf by modules
- moved readme change to separate patch
- added patch setting options for cross-compile
- fixed issue with option error for syscall_nrs.S,
avoiding overlap for ccflags-y.
v2..v1:
- restructured patches order
- split "samples: bpf: Makefile: base progs build on Makefile.progs"
to make change more readable. It added couple nice extra patches.
- removed redundant patch:
"samples: bpf: Makefile: remove target for native build"
- added fix:
"samples: bpf: makefile: fix cookie_uid_helper_example obj build"
- limited -D option filter only for arm
- improved comments
- added couple instructions to verify cross compilation for arm and
arm64 arches based on TI am57xx and am65xx sdks.
- corrected include a little order
====================
Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add couple preparation steps: clean and configuration. Also add newly
added sysroot support info to cross-compile section.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191011002808.28206-16-ivan.khoronzhuk@linaro.org
Basically it only enables that was added by previous couple fixes.
Sysroot contains correct libs installed and its headers. Useful when
working with NFC or virtual machine.
Usage example:
clean (on demand)
make ARCH=arm -C samples/bpf clean
make ARCH=arm -C tools clean
make ARCH=arm clean
configure and install headers:
make ARCH=arm defconfig
make ARCH=arm headers_install
build samples/bpf:
make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- samples/bpf/ \
SYSROOT="path/to/sysroot"
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191011002808.28206-15-ivan.khoronzhuk@linaro.org
In case of C/LDFLAGS there is no way to pass them correctly to build
command, for instance when --sysroot is used or external libraries
are used, like -lelf, wich can be absent in toolchain. This can be
used for samples/bpf cross-compiling allowing to get elf lib from
sysroot.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191011002808.28206-13-ivan.khoronzhuk@linaro.org
David S. Miller