The ftrace hash was used by the ftrace_daemon code. The record ip function
would place the calling address (ip) into the hash. The daemon would later
read the hash and modify that code.
The hash complicates the code. This patch removes it.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The arch dependent function ftrace_mcount_set was only used by the daemon
start up code. This patch removes it.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When an anomaly is detected, we need a way to completely disable
ftrace. Right now we have two functions: ftrace_kill and ftrace_kill_atomic.
The ftrace_kill tries to do it in a "nice" way by converting everything
back to a nop.
The "nice" way is dangerous itself, so this patch removes it and only
has the "atomic" version, which is all that is needed.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Have the ftrace_modify_code return error values:
-EFAULT on error of reading the address
-EINVAL if what is read does not match what it expected
-EPERM if the write fails to update after a successful match.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Due to confusion between the ftrace infrastructure and the gcc profiling
tracer "ftrace", this patch renames the config options from FTRACE to
FUNCTION_TRACER. The other two names that are offspring from FTRACE
DYNAMIC_FTRACE and FTRACE_MCOUNT_RECORD will stay the same.
This patch was generated mostly by script, and partially by hand.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Change the time resolution for initcall_debug to microseconds, from
milliseconds. This is handy to determine which initcalls you want to work
on for faster booting.
One one of my test machines, over 90% of the initcalls are less than a
millisecond and (without this patch) these are all reported as 0 msecs.
Working on the 900 us ones is more important than the 4 us ones.
With 'quiet' on the kernel command line, this adds no significant overhead
to kernel boot time.
Signed-off-by: Tim Bird <tim.bird@am.sony.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
At this time, only built-in initcalls interest us.
We can't really produce a relevant graph if we include
the modules initcall too.
I had good results after this patch (see svg in attachment).
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Including <linux/ktime.h> eliminates the following error:
include/linux/ftrace.h:220: error: expected specifier-qualifier-list
before 'ktime_t'
Signed-off-by: Steven Noonan <steven@uplinklabs.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
fix:
In file included from kernel/sysctl.c:52:
include/linux/ftrace.h:217: error: 'KSYM_NAME_LEN' undeclared here (not in a function)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
After some initcall traces, some initcall names may be inconsistent.
That's because these functions will disappear from the .init section
and also their name from the symbols table.
So we have to copy the name of the function in a buffer large enough
during the trace appending. It is not costly for the ring_buffer because
the number of initcall entries is commonly not really large.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Change the boot tracer printing to make it parsable for
the scripts/bootgraph.pl script.
We have now to output two lines for each initcall, according to the
printk in do_one_initcall() in init/main.c
We need now the call's time and the return's time.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add the boot/initcall tracer.
It's primary purpose is to be able to trace the initcalls.
It is intended to be used with scripts/bootgraph.pl after some small
improvements.
Note that it is not active after its init. To avoid tracing (and so
crashing) before the whole tracing engine init, you have to explicitly
call start_boot_trace() after do_pre_smp_initcalls() to enable it.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
ftrace_release is necessary for all uses of dynamic ftrace and not just
the archs that have CONFIG_FTRACE_MCOUNT_RECORD defined.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
fix:
kernel/built-in.o: In function `ftrace_dump':
(.text+0x2e2ea): undefined reference to `ftrace_kill_atomic'
Signed-off-by: Ingo Molnar <mingo@elte.hu>
At OLS I had a lot of interest to be able to have the ftrace buffers
dumped on panic. Usually one would expect to uses kexec and examine
the buffers after a new kernel is loaded. But sometimes the resources
do not permit kdump and kexec, so having an option to still see the
sequence of events up to the crash is very advantageous.
This patch adds the option to have the ftrace buffers dumped to the
console in the latency_trace format on a panic. When the option is set,
the default entries per CPU buffer are lowered to 16384, since the writing
to the serial (if that is the console) may take an awful long time
otherwise.
[
Changes since -v1:
Got alpine to send correctly (as well as spell check working).
Removed config option.
Moved the static variables into ftrace_dump itself.
Gave printk a log level.
]
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Based on Randy Dunlap's suggestion, the ftrace_printk kernel-doc belongs
with the ftrace_printk macro that should be used. Not with the
__ftrace_printk internal function.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds a feature that can help kernel developers debug their
code using ftrace.
int ftrace_printk(const char *fmt, ...);
This records into the ftrace buffer using printf formatting. The entry
size in the buffers are still a fixed length. A new type has been added
that allows for more entries to be used for a single recording.
The start of the print is still the same as the other entries.
It returns the number of characters written to the ftrace buffer.
For example:
Having a module with the following code:
static int __init ftrace_print_test(void)
{
ftrace_printk("jiffies are %ld\n", jiffies);
return 0;
}
Gives me:
insmod-5441 3...1 7569us : ftrace_print_test: jiffies are 4296626666
for the latency_trace file and:
insmod-5441 [03] 1959.370498: ftrace_print_test jiffies are 4296626666
for the trace file.
Note: Only the infrastructure should go into the kernel. It is to help
facilitate debugging for other kernel developers. Calls to ftrace_printk
is not intended to be left in the kernel, and should be frowned upon just
like scattering printks around in the code.
But having this easily at your fingertips helps the debugging go faster
and bugs be solved quicker.
Maybe later on, we can hook this with markers and have their printf format
be sucked into ftrace output.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When a mcount pointer is recorded into a table, it is used to add or
remove calls to mcount (replacing them with nops). If the code is removed
via removing a module, the pointers still exist. At modifying the code
a check is always made to make sure the code being replaced is the code
expected. In-other-words, the code being replaced is compared to what
it is expected to be before being replaced.
There is a very small chance that the code being replaced just happens
to look like code that calls mcount (very small since the call to mcount
is relative). To remove this chance, this patch adds ftrace_release to
allow module unloading to remove the pointers to mcount within the module.
Another change for init calls is made to not trace calls marked with
__init. The tracing can not be started until after init is done anyway.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch enables the loading of the __mcount_section of modules and
changing all the callers of mcount into nops.
The modification is done before the init_module function is called, so
again, we do not need to use kstop_machine to make these changes.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This is the infrastructure to the converting the mcount call sites
recorded by the __mcount_loc section into nops on boot. It also allows
for using these sites to enable tracing as normal. When the __mcount_loc
section is used, the "ftraced" kernel thread is disabled.
This uses the current infrastructure to record the mcount call sites
as well as convert them to nops. The mcount function is kept as a stub
on boot up and not converted to the ftrace_record_ip function. We use the
ftrace_record_ip to only record from the table.
This patch does not handle modules. That comes with a later patch.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add __ftrace_enabled_save/restore, used to disable ftrace for a while.
Now, this is used by kexec jump, which need a version without lock, for
general situation, a locked version should be used.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It has been suggested that I add a way to disable the function tracer
on an oops. This code adds a ftrace_kill_atomic. It is not meant to be
used in normal situations. It will disable the ftrace tracer, but will
not perform the nice shutdown that requires scheduling.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Let records identified as being kprobe'd be marked as "frozen". The trouble
with records which have a kprobe installed on their mcount call-site is
that they don't get updated. So if such a function which is currently being
traced gets its tracing disabled due to a new filter rule (or because it
was added to the notrace list) then it won't be updated and continue being
traced. This patch allows scanning of all frozen records during tracing to
check if they should be traced.
Signed-off-by: Abhishek Sagar <sagar.abhishek@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Record the address of the mcount call-site. Currently all archs except sparc64
record the address of the instruction following the mcount call-site. Some
general cleanups are entailed. Storing mcount addresses in rec->ip enables
looking them up in the kprobe hash table later on to check if they're kprobe'd.
Signed-off-by: Abhishek Sagar <sagar.abhishek@gmail.com>
Cc: davem@davemloft.net
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Prevent freeing of records which cause problems and correspond to function from
core kernel text. A new flag, FTRACE_FL_CONVERTED is used to mark a record
as "converted". All other records are patched lazily to NOPs. Failed records
now also remain on frace_hash table. Each invocation of ftrace_record_ip now
checks whether the traced function has ever been recorded (including past
failures) and doesn't re-record it again.
Signed-off-by: Abhishek Sagar <sagar.abhishek@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In dynamic ftrace, the mcount function starts off pointing to a stub
function that just returns.
On start up, the call to the stub is modified to point to a "record_ip"
function. The job of the record_ip function is to add the function to
a pre-allocated hash list. If the function is already there, it simply is
ignored, otherwise it is added to the list.
Later, a ftraced daemon wakes up and calls kstop_machine if any functions
have been recorded, and changes the calls to the recorded functions to
a simple nop. If no functions were recorded, the daemon goes back to sleep.
The daemon wakes up once a second to see if it needs to update any newly
recorded functions into nops. Usually it does not, but if a lot of code
has been executed for the first time in the kernel, the ftraced daemon
will call kstop_machine to update those into nops.
The problem currently is that there's no way to stop the daemon from doing
this, and it can cause unneeded latencies (800us which for some is bothersome).
This patch adds a new file /debugfs/tracing/ftraced_enabled. If the daemon
is active, reading this will return "enabled\n" and "disabled\n" when the
daemon is not running. To disable the daemon, the user can echo "0" or
"disable" into this file, and "1" or "enable" to re-enable the daemon.
Since the daemon is used to convert the functions into nops to increase
the performance of the system, I also added that anytime something is
written into the ftraced_enabled file, kstop_machine will run if there
are new functions that have been detected that need to be converted.
This way the user can disable the daemon but still be able to control the
conversion of the mcount calls to nops by simply,
"echo 0 > /debugfs/tracing/ftraced_enabled"
when they need to do more conversions.
To see the number of converted functions:
"cat /debugfs/tracing/dyn_ftrace_total_info"
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
While debugging latencies in the RT kernel, I found that it would be nice
to be able to filter away functions from the trace than just to filter
on functions.
I added a new interface to the debugfs tracing directory called
set_ftrace_notrace
When dynamic frace is enabled, this lets you filter away functions that will
not be recorded in the trace. It is similar to adding 'notrace' to those
functions but by doing it without recompiling the kernel.
Here's how set_ftrace_filter and set_ftrace_notrace interact. Remember, if
set_ftrace_filter is set, it removes all functions from the trace execpt for
those listed in the set_ftrace_filter. set_ftrace_notrace will prevent those
functions from being traced.
If you were to set one function in both set_ftrace_filter and
set_ftrace_notrace and that function was the same, then you would end up
with an empty trace.
the set of functions to trace is:
set_ftrace_filter == empty then
all functions not in set_ftrace_notrace
else
set of the set_ftrace_filter and not in set of set_ftrace_notrace.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Since ftrace touches practically every function. If we detect any
anomaly, we want to fully disable ftrace. This patch adds code
to try shutdown ftrace as much as possible without doing any more
harm is something is detected not quite correct.
This only kills ftrace, this patch does have checks for other parts of
the tracer (irqsoff, wakeup, etc.).
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The ftrace dynamic function update allocates a record to store the
instruction pointers that are being modified. If the modified
instruction pointer fails to update, then the record is marked as
failed and nothing more is done.
Worse, if the modification fails, but the record ip function is still
called, it will allocate a new record and try again. In just a matter
of time, will this cause a serious memory leak and crash the system.
This patch plugs this memory leak. When a record fails, it is
included back into the pool of records to be used. Now a record may
fail over and over again, but the number of allocated records will
not increase.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch adds a startup self test on dynamic code modification
and filters. The test filters on a specific function, makes sure that
no other function is traced, exectutes the function, then makes sure that
the function is traced.
This patch also fixes a slight bug with the ftrace selftest, where
tracer_enabled was not being set.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
disable the tracer while kexec pulls the rug from under the old
kernel.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch adds two files to the debugfs system:
/debugfs/tracing/available_filter_functions
and
/debugfs/tracing/set_ftrace_filter
The available_filter_functions lists all functions that has been
recorded by the ftraced that has called the ftrace_record_ip function.
This is to allow users to see what functions have been converted
to nops and can be enabled for tracing.
To enable functions, simply echo the names (whitespace delimited)
into set_ftrace_filter. Simple wildcards are also allowed.
echo 'scheduler' > /debugfs/tracing/set_ftrace_filter
Will have only the scheduler be activated when tracing is enabled.
echo 'sched_*' > /debugfs/tracing/set_ftrace_filter
Will have only the functions starting with 'sched_' be activated.
echo '*lock' > /debugfs/tracing/set_ftrace_filter
Will have only functions ending with 'lock' be activated.
echo '*lock*' > /debugfs/tracing/set_ftrace_filter
Will have only functions with 'lock' in its name be activated.
Note: 'sched*lock' will not work. The only wildcards that are
allowed is an asterisk and the beginning and or end of the string
passed in.
Multiple names can be passed in with whitespace delimited:
echo 'scheduler *lock *acpi*' > /debugfs/tracing/set_ftrace_filter
is also the same as:
echo 'scheduler' > /debugfs/tracing/set_ftrace_filter
echo '*lock' >> /debugfs/tracing/set_ftrace_filter
echo '*acpi*' >> /debugfs/tracing/set_ftrace_filter
Appending does just that. It appends to the list.
To disable all filters simply echo an empty line in:
echo > /debugfs/tracing/set_ftrace_filter
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch replaces the indirect call to the mcount function
pointer with a direct call that will be patched by the
dynamic ftrace routines.
On boot up, the mcount function calls the ftace_stub function.
When the dynamic ftrace code is initialized, the ftrace_stub
is replaced with a call to the ftrace_record_ip, which records
the instruction pointers of the locations that call it.
Later, the ftraced daemon will call kstop_machine and patch all
the locations to nops.
When a ftrace is enabled, the original calls to mcount will now
be set top call ftrace_caller, which will do a direct call
to the registered ftrace function. This direct call is also patched
when the function that should be called is updated.
All patching is performed by a kstop_machine routine to prevent any
type of race conditions that is associated with modifying code
on the fly.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch moves the memory management of the ftrace
records out of the arch code and into the generic code
making the arch code simpler.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch adds back the sysctl ftrace_enabled. This time it is
defaulted to on, if DYNAMIC_FTRACE is configured. When ftrace_enabled
is disabled, the ftrace function is set to the stub return.
If DYNAMIC_FTRACE is also configured, on ftrace_enabled = 0,
the registered ftrace functions will all be set to jmps, but no more
new calls to ftrace recording (used to find the ftrace calling sites)
will be called.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch adds a feature to dynamically replace the ftrace code
with the jmps to allow a kernel with ftrace configured to run
as fast as it can without it configured.
The way this works, is on bootup (if ftrace is enabled), a ftrace
function is registered to record the instruction pointer of all
places that call the function.
Later, if there's still any code to patch, a kthread is awoken
(rate limited to at most once a second) that performs a stop_machine,
and replaces all the code that was called with a jmp over the call
to ftrace. It only replaces what was found the previous time. Typically
the system reaches equilibrium quickly after bootup and there's no code
patching needed at all.
e.g.
call ftrace /* 5 bytes */
is replaced with
jmp 3f /* jmp is 2 bytes and we jump 3 forward */
3:
When we want to enable ftrace for function tracing, the IP recording
is removed, and stop_machine is called again to replace all the locations
of that were recorded back to the call of ftrace. When it is disabled,
we replace the code back to the jmp.
Allocation is done by the kthread. If the ftrace recording function is
called, and we don't have any record slots available, then we simply
skip that call. Once a second a new page (if needed) is allocated for
recording new ftrace function calls. A large batch is allocated at
boot up to get most of the calls there.
Because we do this via stop_machine, we don't have to worry about another
CPU executing a ftrace call as we modify it. But we do need to worry
about NMI's so all functions that might be called via nmi must be
annotated with notrace_nmi. When this code is configured in, the NMI code
will not call notrace.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Add preempt off timings. A lot of kernel core code is taken from the RT patch
latency trace that was written by Ingo Molnar.
This adds "preemptoff" and "preemptirqsoff" to /debugfs/tracing/available_tracers
Now instead of just tracing irqs off, preemption off can be selected
to be recorded.
When this is selected, it shares the same files as irqs off timings.
One can either trace preemption off, irqs off, or one or the other off.
By echoing "preemptoff" into /debugfs/tracing/current_tracer, recording
of preempt off only is performed. "irqsoff" will only record the time
irqs are disabled, but "preemptirqsoff" will take the total time irqs
or preemption are disabled. Runtime switching of these options is now
supported by simpling echoing in the appropriate trace name into
/debugfs/tracing/current_tracer.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
If CONFIG_FTRACE is selected and /proc/sys/kernel/ftrace_enabled is
set to a non-zero value the ftrace routine will be called everytime
we enter a kernel function that is not marked with the "notrace"
attribute.
The ftrace routine will then call a registered function if a function
happens to be registered.
[ This code has been highly hacked by Steven Rostedt and Ingo Molnar,
so don't blame Arnaldo for all of this ;-) ]
Update:
It is now possible to register more than one ftrace function.
If only one ftrace function is registered, that will be the
function that ftrace calls directly. If more than one function
is registered, then ftrace will call a function that will loop
through the functions to call.
Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Steven Rostedt