Commit Graph

786 Commits

Author SHA1 Message Date
Jean Delvare 4ed1077953 hwmon: (it87) Fix thermal sensor type values
The it87 driver doesn't follow the standard sensor type values as
documented in Documentation/hwmon/sysfs-interface. It uses value 2 for
thermistors instead of value 4. This causes "sensors" to tell the user
that the chip is setup for a transistor while it is actually setup for
a thermistor.

Using value 4 for thermistors solves the problem. For compatibility
reasons, we still accept value 2 but emit a warning message so that
users update their configuration files.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
2008-10-17 17:51:16 +02:00
Jean Delvare 0c6e973171 hwmon: (lm78) Convert to a new-style i2c driver
The new-style lm78 driver implements the optional detect() callback
to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-17 17:51:16 +02:00
Jean Delvare 6e1b5029dc hwmon: (lm78) Stop abusing struct i2c_client for ISA devices
Upcoming changes to the I2C part of the lm78 driver will cause ISA
devices to no longer have a struct i2c_client at hand. So, we must
stop (ab)using it now.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-17 17:51:15 +02:00
Jean Delvare ad3273be8e hwmon: (lm78) Prevent misdetection of Winbond chips
The LM78 detection is relatively weak, and sometimes recent Winbond
chips can be misdetected as an LM78. We have had repeated reports of
this happening. We have an explicit check against this for the ISA
access, do the same for I2C access now.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-17 17:51:15 +02:00
Jean Delvare 18c73f9042 hwmon: (lm78) Detect alias chips
The LM78 and LM79 can be accessed either on the I2C bus or the ISA
bus. We must not access the same chip through both interfaces. So far
we were relying on the user passing the correct ignore parameter to
skip the registration of the I2C interface as suggested by
sensors-detect, but this is fragile: the user may load the lm78
driver without running sensors-detect, and the i2c bus numbers are
not stable across reboots and hardware changes.

So, better detect alias chips in the driver directly, and skip any
I2C chip which is obviously an alias of the ISA chip. This is done
by comparing the value of 26 selected registers.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-17 17:51:15 +02:00
Jean Delvare 47c15532dd hwmon: (lm78) Fix I/O resource conflict with PNP
Only request I/O ports 0x295-0x296 instead of the full I/O address
range. This solves a conflict with PNP resources on a few motherboards.

Also request the I/O ports in two parts (4 low ports, 4 high ports)
during device detection, otherwise the PNP resource make the request
(and thus the detection) fail.

This is the exact same fix that was applied to driver w83781d in
March 2008 to address the same problem:
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=2961cb22ef02850d90e7a12c28a14d74e327df8d

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-17 17:51:15 +02:00
Jean Delvare f908037a01 hwmon: (lm85) Better label names
Label names ERROR1 and ERROR3 aren't exactly explicit. Change them for
better names that indicate what we are up to.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Herbert Poetzl <herbert@13thfloor.at>
2008-10-17 17:51:14 +02:00
Jean Delvare 1b92adaddd hwmon: (lm85) Simplify RANGE_TO_REG
Function RANGE_TO_REG can easily be simplified. Credits go to Herbert
Poetzl for indirectly suggesting this to me. I tested that the new
implementation returns the same result as the original implementation
for all input values.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Herbert Poetzl <herbert@13thfloor.at>
2008-10-17 17:51:14 +02:00
Jean Delvare 67712d0192 hwmon: (lm85) Convert to a new-style i2c driver
The new-style lm85 driver implements the optional detect() callback
to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Herbert Poetzl <herbert@13thfloor.at>
2008-10-17 17:51:14 +02:00
Jean Delvare 8a0795d9b8 hwmon: (lm85) Support different PWM frequency tables
The Analog Devices and SMSC devices supported by the lm85 driver do
not have the same PWM frequency table as the National Semiconductor
devices. Add support for per-device frequency tables.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Herbert Poetzl <herbert@13thfloor.at>
2008-10-17 17:51:14 +02:00
Jean Delvare 86010c982d hwmon: (lm85) Select the closest PWM frequency
The LM85 and compatible chips only support 8 arbitrary PWM frequencies.
The algorithm to pick one of them based on the user input is not
optimum. Improve it to always pick the closest supported frequency.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Herbert Poetzl <herbert@13thfloor.at>
2008-10-17 17:51:13 +02:00
Jean Delvare 34e7dc6ca4 hwmon: (lm85) Implement the standard PWM frequency interface
Implement the standard PWM frequency interface: pwm[1-*]_freq in
units of 1 Hz, instead of the non-standard pwm[1-*]_auto_pwm_freq
in units of 0.1 Hz. The old naming was not only non-standard, it was
also confusing, because it suggested that the frequency value only
applied in automatic fan speed mode, which isn't true.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Herbert Poetzl <herbert@13thfloor.at>
2008-10-17 17:51:13 +02:00
Jean Delvare 69fc1feba2 hwmon: (lm85) Rework the device detection
Rework the device detection to make it clearer and faster in the
general case (when a known device is found.)

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Herbert Poetzl <herbert@13thfloor.at>
2008-10-17 17:51:13 +02:00
Dmitry Torokhov dbee356262 hwmon: (ams) Simplify IRQ handling routine
Simplify the IRQ handling routine of ams driver.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-17 17:51:13 +02:00
Dmitry Torokhov ee4cd32ee8 hwmon: (ams) Fix locking issues
Use a separate mutex to serialize input device creation/removal,
otheriwse we deadlock if we try to remove input device while it is
being polled. Also do not take ams_info.lock when it is not needed.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-17 17:51:12 +02:00
Dmitry Torokhov 0a02002268 hwmon: (ams) Fix permissions on 'joystick' module parameter
We should not allow writes to the 'joystick' module parameters since
writing there will not trigger creation of the input device. Disable
writes since we provide alternative way of enabling input device via
AMS device's sysfs attribute.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-17 17:51:12 +02:00
Jean Delvare 810ad7b62c hwmon: (ams) Convert to a new-style i2c driver
The legacy i2c binding model is phasing out, so the ams driver needs
to be converted to a new-style i2c driver. Here is a naive approach of
this conversion. Basically it is moving the i2c device creation from
the ams driver to the i2c-powermac driver. This should work, but I
suspect we could come up with something cleaner by declaring the i2c
device as part of the platform setup. This could be done later by
someone more familiar with openfirmware-based platforms than I am
myself.

One nice thing brought by this conversion is that the ams driver
should be loaded automatically on systems where is is needed (at
least when the I2C interface to the chip is used) providing
coldplug-aware user-space environment.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Cc: Stelian Pop <stelian@popies.net>
Cc: Michael Hanselmann <linux-kernel@hansmi.ch>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-10-17 17:51:12 +02:00
Ben Hutchings 47064d645b hwmon: (lm87) Add support for configuration through platform_data
The lm87 driver normally assumes that firmware configured the chip
correctly.  Since this is not always the case, alllow platform code to
set the channel register value via platform_data.  All other
configuration registers can be changed after driver initialisation.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-17 17:51:12 +02:00
Ben Hutchings d2cac802fe hwmon: (lm87) Restore original configuration register on removal
This means that if we have to start the monitor when probed, we also
stop it on removal.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-17 17:51:11 +02:00
Ben Hutchings 49ae6cc800 hwmon: (lm87) Fix masking of config register in lm87_init_client()
lm87_init_client() conditionally sets the Start bit and clears the
INT#_Clear bit in the Config 1 register.  The condition should be that
either of these bits needs changing, but currently it checks the
(self-clearing) Initialization bit instead of INT#_Clear.

Fix the condition and also ensure we never set the Initialization bit.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-17 17:51:11 +02:00
Jean Delvare 4b4e7a72fd hwmon: (lm90) Don't spam the kernel log
Degrade the "Unsupported chip" message from info to debug level.
There's nothing wrong with this, so no need to bother the user.
Also make the message slightly more descriptive.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Martyn Welch <martyn.welch@gefanuc.com>
2008-10-17 17:51:11 +02:00
Ben Hutchings 271dabf5bb hwmon: (lm90) Support MAX6646, MAX6647 and MAX6649
These Maxim chips are similar to MAX6657 but use unsigned temperature
values to allow for readings up to 145 degrees.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-17 17:51:11 +02:00
Ben Hutchings 9d4d383422 hwmon: (lm90) Rename temperature conversion functions to match usage
The encoding of temperatures varies between chips and modes.  So do not
use "temp1" or "temp2" in the names of the conversion functions, but
specify the encoding.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Martyn Welch <martyn.welch@gefanuc.com>
2008-10-17 17:51:10 +02:00
Nate Case 23b2d4778a hwmon: (lm90) Support ADT7461 in extended mode
Support ADT7461 in extended temperature range mode, which will change
the range of readings from 0..127 to -64..191 degC.  Adjust the
register conversion functions accordingly.

Signed-off-by: Nate Case <ncase@xes-inc.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Martyn Welch <martyn.welch@gefanuc.com>
2008-10-17 17:51:10 +02:00
Nate Case cea50fe2fd hwmon: (lm90) Convert some macros to static functions
Use static functions instead of the TEMPx_FROM_REG* and TEMPx_TO_REG*
macros.  This will ensure type safety and eliminate any side effects
from arguments passed in since the macros referenced 'val' multiple
times.  This change should not affect functionality.

Signed-off-by: Nate Case <ncase@xes-inc.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Martyn Welch <martyn.welch@gefanuc.com>
2008-10-17 17:51:10 +02:00
Jean Delvare a874a10cf0 hwmon: (lm90) Update datasheet links
Update the links to the datasheet of some of the devices supported by
the lm90 driver. Also remove the links from the driver itself, so that
we don't have to update them twice each time they change.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Martyn Welch <martyn.welch@gefanuc.com>
2008-10-17 17:51:10 +02:00
Jean Delvare 5f502a834a hwmon: (lm90) Don't access nonexistent registers on Maxim chips
The Maxim chips supported by the lm90 driver have 8-bit high and low
remote limit values, not 11-bit as the other chips have. So stop reading
from and writing to registers that do not exist on these chips. Also
round the limit values set by the user properly.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Martyn Welch <martyn.welch@gefanuc.com>
2008-10-17 17:51:09 +02:00
Jean Delvare f65e17086f hwmon: (lm90) Support the extra resolution bits of MAX6657
The Maxim MAX6657, MAX6658 and MAX6659 have extra resolution bits for
the local temperature measurement. Let the lm90 driver read them and
export them to user-space.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Martyn Welch <martyn.welch@gefanuc.com>
2008-10-17 17:51:09 +02:00
Jean Delvare 6388a388ff hwmon: (lm90) Move 16-bit value read to a separate function
Move the code which aggregates two 8-bit register values into a 16-bit
value to a separate function. We'll need to do it a second time soon and
I don't want to duplicate the code.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Martyn Welch <martyn.welch@gefanuc.com>
2008-10-17 17:51:09 +02:00
Greg Kroah-Hartman a9b12619f7 device create: misc: convert device_create_drvdata to device_create
Now that device_create() has been audited, rename things back to the
original call to be sane.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-16 09:24:43 -07:00
Linus Torvalds 5f2434a66d Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (158 commits)
  powerpc: Fix CHRP PCI config access for indirect_pci
  powerpc/chrp: Fix detection of Python PCI host bridge on IBM CHRPs
  powerpc: Fix 32-bit SMP boot on CHRP
  powerpc: Fix link errors on 32-bit machines using legacy DMA
  powerpc/pci: Improve detection of unassigned bridge resources
  hvc_console: Fix free_irq in spinlocked section
  powerpc: Get USE_STRICT_MM_TYPECHECKS working again
  powerpc: Reflect the used arguments in machine_init() prototype
  powerpc: Fix DMA offset for non-coherent DMA
  powerpc: fix fsl_upm nand driver modular build
  powerpc/83xx: add NAND support for the MPC8360E-RDK boards
  powerpc: FPGA support for GE Fanuc SBC610
  i2c: MPC8349E-mITX Power Management and GPIO expander driver
  powerpc: reserve two DMA channels for audio in MPC8610 HPCD device tree
  powerpc: document the "fsl,ssi-dma-channel" compatible property
  powerpc: disable CHRP and PMAC support in various defconfigs
  OF: add fsl,mcu-mpc8349emitx to the exception list
  powerpc/83xx: add DS1374 RTC support for the MPC837xE-MDS boards
  powerpc: remove support for bootmem-allocated memory for the DIU driver
  powerpc: remove non-dependent load fsl_booke PTE_64BIT
  ...
2008-10-15 08:07:35 -07:00
Benjamin Herrenschmidt 6dc6472581 Merge commit 'origin'
Manual fixup of conflicts on:

	arch/powerpc/include/asm/dcr-regs.h
	drivers/net/ibm_newemac/core.h
2008-10-15 11:31:54 +11:00
Jean Delvare 67a37308ae hwmon: (dme1737) Convert to a new-style i2c driver
The new-style dme1737 driver implements the optional detect() callback
to cover the use cases of the legacy driver. I don't actually expect
any new-style device for that driver, but as the old i2c API is going
away soon, we have to switch to the new one.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Juerg Haefliger <juergh@gmail.com>
2008-10-14 17:30:04 +02:00
Jean Delvare dbc2bc251e hwmon: (dme1737) Be less i2c-centric
The dme1737 driver support both LPC (ISA) and SMBus devices. At the
moment it's rather i2c-centric, and LPC variants use a fake i2c_client
for some operations.

In a near future, i2c_client will be allocated by i2c-core rather than
by the device drivers, so non-i2c drivers will not have one. As a
preparation step, change the driver code to no longer assume that
an i2c_client structure is always available. No functional change.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Juerg Haefliger <juergh@gmail.com>
2008-10-14 17:30:04 +02:00
David S. Miller 56c5d900db Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:

	sound/core/memalloc.c
2008-10-11 12:39:35 -07:00
Linus Torvalds 7cc4e87f91 Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (236 commits)
  [ARM] 5300/1: fixup spitz reset during boot
  [ARM] 5295/1: make ZONE_DMA optional
  [ARM] 5239/1: Palm Zire 72 power management support
  [ARM] 5298/1: Drop desc_handle_irq()
  [ARM] 5297/1: [KS8695] Fix two compile-time warnings
  [ARM] 5296/1: [KS8695] Replace macro's with trailing underscores.
  [ARM] pxa: allow multi-machine PCMCIA builds
  [ARM] pxa: add preliminary CPUFREQ support for PXA3xx
  [ARM] pxa: add missing ACCR bit definitions to pxa3xx-regs.h
  [ARM] pxa: rename cpu-pxa.c to cpufreq-pxa2xx.c
  [ARM] pxa/zylonite: add support for USB OHCI
  [ARM] ohci-pxa27x: use ioremap() and offset for register access
  [ARM] ohci-pxa27x: introduce pxa27x_clear_otgph()
  [ARM] ohci-pxa27x: use platform_get_{irq,resource} for the resource
  [ARM] ohci-pxa27x: move OHCI controller specific registers into the driver
  [ARM] ohci-pxa27x: introduce flags to avoid direct access to OHCI registers
  [ARM] pxa: move I2S register and bit definitions into pxa2xx-i2s.c
  [ARM] pxa: simplify DMA register definitions
  [ARM] pxa: make additional DCSR bits valid for PXA3xx
  [ARM] pxa: move i2c register and bit definitions into i2c-pxa.c
  ...

Fixed up conflicts in
	arch/arm/mach-versatile/core.c
	sound/soc/pxa/pxa2xx-ac97.c
	sound/soc/pxa/pxa2xx-i2s.c
manually.
2008-10-11 10:09:45 -07:00
Alistair John Strachan 5e5cddbc3f hwmon: (abituguru3) Enable DMI probing feature on Abit AT8 32X
Enable driver checking of the DMI product name (when enabled) on
an Abit AT8 32X, instead of falling back to a manual probe. This
eliminates false negatives and eventually will help avoid
unnecessary bus probes on unsupported mainboards.

Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk>
Tested-by: Daniel Exner <dex@dragonslave.de>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-09 15:33:59 +02:00
Alistair John Strachan 8748a71e8c hwmon: (abituguru3) Enable reading from AUX3 fan on Abit AT8 32X
The table for the Abit AT8 32X was incorrectly missing an entry
for the sixth ("AUX3") fan. Add this entry, exporting the fan
reading to userspace.

Closes lm-sensors.org ticket #2339.

Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk>
Tested-by: Daniel Exner <dex@dragonslave.de>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-09 15:33:59 +02:00
Jean Delvare 98dd22c3e0 hwmon: (it87) Prevent power-off on Shuttle SN68PT
On the Shuttle SN68PT, FAN_CTL2 is apparently not connected to a fan,
but to something else. One user has reported instant system power-off
when changing the PWM2 duty cycle, so we disable it.

I use the board name string as the trigger in case the same board is
ever used in other systems.

This closes lm-sensors ticket #2349:
pwmconfig causes a hard poweroff
http://www.lm-sensors.org/ticket/2349

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-09 15:33:58 +02:00
Eric Miao f16177c20c hwmon: add max1111_read_channel() for use by sharpsl_pm
This is not generic, and is added here for backward compatibility.
It is made an individual commit here to make it easier for revert
once the sharpsl_pm gets generic enough.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-23 22:04:32 +01:00
Eric Miao 55b951e7e6 hwmon: add max1111 Low-power Multichannel Serial 8-bit ADCs
Driver based on corgi_ssp.c and sharpsl_pm.c, previously done by Richard
Purdie and many others.

Now changed to generic HWMON device and expose all the ADC input value
through sysfs.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-23 22:04:32 +01:00
Adrian Bunk d130d97154 hwmon: (ad7414) Make ad7414_update_device() static
This patch makes the needlessly global ad7414_update_device() static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Sean MacLennan <smaclennan@pikatech.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-09-20 10:25:20 +02:00
Andrew Paprocki 859b9ef30c hwmon: (it87) Fix fan tachometer reading in IT8712F rev 0x7 (I)
The IT8712F v0.9.1 datasheet applies to revisions >= 0x8 (J).
The driver was incorrectly attempting to enable 16-bit fan
readings on rev 0x7 (I) which led to incorrect RPM values.

Signed-off-by: Andrew Paprocki <andrew@ishiboo.com>
Tested-by: John Gumb <john.gumb@tandberg.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-09-20 10:25:19 +02:00
Jean Delvare 13b3c3fa27 hwmon: (atxp1) Fix device detection logic
The atxp1 device detection code has a major logic flaw, fix it. Not
sure how we managed to miss this when the driver was merged...

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Sebastian Witt <se.witt@gmx.net>
2008-09-20 10:25:19 +02:00
David S. Miller fd098316ef sparc: Annotate of_device_id arrays with const or __initdata.
As suggested by Stephen Rothwell.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-31 01:23:17 -07:00
David S. Miller e04180882f hwmon: Add Ultra45 workstation hwmon driver.
This is a PIC16F747 based controller that monitors and consolidates
the hardware access to various fan and temperature values reported by
adr7462 and similar devices behind an I2C bus.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-24 20:59:49 -07:00
Stephen Rothwell f6f11018dc powerpc/drivers: Use linux/of_device.h instead of asm/of_device.h
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-08-20 16:34:59 +10:00
Jean Delvare cebd7709d3 hwmon-vid: Fix AMD K8 VID decoding
Not all AMD K8 have 6 VID pins, contrary to what was assumed in
commit 116d0486bd. This commit broke
support of older CPU models which have only 5 VID pins:
http://bugzilla.kernel.org/show_bug.cgi?id=11329

We need two entries in the hwmon-vid table, one for 5-bit VID models
(K8 revision <= E) and one for 6-bit VID models (K8 revision >= F).
This fixes bug #11329.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Frank Myhr <fmyhr@fhmtech.com>
Tested-by: Jean-Luc Coulon <jean.luc.coulon@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-15 11:50:15 -07:00
Darrick J. Wong 34c86c1e62 coretemp: recognize Nehalem CPUs
Add in the CPUID for Nehalem chips.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Cc: Kent Liu <kent.liu@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-15 08:35:44 -07:00
Darrick J. Wong bb15e7f286 ibmaem: don't query the entire sensor repository when reading energy meter
Currently, all sensors are read when the energy meter is queried via
sysfs.  This introduces a considerable amount of delay and variation in
the sysfs reading, which is not desirable when trying to profile energy
use.  Therefore, read only the energy meters when a sysfs query comes in
for them, and don't cache the results so that we always get the latest
reading.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-15 08:35:44 -07:00
Darrick J. Wong 9c5413eac5 ibmaem: prevent infinite probing loop on x3650 M2 systems
On older machines, probing for a nonexistent AEM interface returned an
IPMI error; when we saw this, we'd stop probing.  On the x3650 M2 and
(presumably) later, we are returned a value indicating success and a
buffer full of garbage or zeroes.  This causes the probe function to run
in an infinite loop.  To fix this, we add one last check--if the
interface number we're looking for is higher than the number of
interfaces that AEM claims to have, stop probing.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-15 08:35:44 -07:00
Darrick J. Wong eb93b7df7e ibmaem: update the documentation to reflect the current name
Minor documentation update to reflect the current full name of the power
management hardware interface and reflows the text a bit.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-15 08:35:44 -07:00
Alistair John Strachan 4ef664b5bc abituguru3: prefer DMI probing to manual probing
Previously the driver was only using DMI to prevent smbus probing on
non-Abit motherboards.  However, since the manual probing method is
brittle and prone to failure on some Abit motherboards (esp.  the Abit
IP35 Pro) it is better to use DMI to also read the board name and then
decide whether or not to probe the bus.

At the moment, we do not have a list of valid DMI name strings to use
for existing and supported motherboards.  This patch only implements DMI
probing for the IP35 Pro.  For motherboards that can not yet use DMI
probing, a warning will be printed to the kernel log asking those users
to email me their dmidecode output.

The existing manual probing mechanism will be used if CONFIG_DMI is not
enabled, if DMI probing fails (for DMI-unsupported motherboards), or if
DMI probing fails and the "force" option is set (for DMI-supported
motherboards).  Ideally in the longer term this manual probing method
would be removed.

This patch should be safe to apply as it does not change the probing
behaviour for most of the supported motherboards, just the IP35 Pro,
which already has regressions filed against it in 2.6.26.

Addresses http://bugzilla.kernel.org/show_bug.cgi?id=11212

Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk>
Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-15 08:35:44 -07:00
Darrick J. Wong 963d96b53e i5k_amb: provide labels for temperature sensors
Export the sensor -> channel/dimm mapping in tempX_label.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-15 08:35:43 -07:00
Marc Pignat d42139a3fb hwmon: ADC124S501 generic driver
SPI driver for analog to digital converters national semiconductor
ADC081S101, ADC124S501, ...

Code for 8 channels by Tobias Himmer.

This driver adds support for National Semiconductor ADC<bb><c>S<sss> chip
family, where:

 * bb  is the resolution in number of bits (8, 10, 12)
 * c   is the number of channels (1, 2, 4, 8)
 * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
   kSPS and 101 for 1 MSPS)

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Marc Pignat <marc.pignat@hevs.ch>
Cc: Tobias Himmer <tobias@himmer-online.de>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-15 08:35:43 -07:00
Michael Borisov 16a515fd0c drivers/hwmon/w83791d.c: fix unused var warning
drivers/hwmon/w83791d.c: In function `w83791d_probe':
drivers/hwmon/w83791d.c:1049: warning: unused variable `val1'

Signed-off-by: Michael Borisov <niro@tut.by>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-15 08:35:43 -07:00
Guilherme M. Schroeder f91a79fe86 applesmc: add support for Macbook
Add support for Macbook v3 (sensors and accelerometer).

Signed-off-by: Nicolas Boichat <nicolas@boichat.ch>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-15 08:35:43 -07:00
Roberto De Ioris 9f86f28df1 applesmc: support for Intel iMac
This adds support for fans and temperature sensors on intel iMac.

Tested on iMac 24" 2.8ghz (iMac8,1), it supports the following sensors:

cpu A
ambient
gpu
gpu diode
gpu heatsink
hd bay 1
memory controller
optical drive
power

Signed-off-by: Roberto De Ioris <roberto@unbit.it>
Cc: Nicolas Boichat <nicolas@boichat.ch>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Mark M. Hoffman <mhoffman@lightlink.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-15 08:35:43 -07:00
Jean Delvare 8ff69eebf5 hwmon: (lm75) Drop legacy i2c driver
Drop the legacy lm75 driver, and add a detect callback to the
new-style driver to achieve the same functionality.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: David Brownell <david-b@pacbell.net>
2008-08-10 22:56:16 +02:00
Andrew Paprocki 816d8c6a25 hwmon: (it87) Support for 16-bit fan reading in it8705 >= rev 0x03
The it8705 chip supports 16-bit fan tachometers in revisions at least
>= 0x03 (Version G). This patch enables 16-bit fan readings on all
revisions >= 0x03 just like the it8712, it8716, and it8718 chips.

Signed-off-by: Andrew Paprocki <andrew@ishiboo.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-08-06 22:41:06 +02:00
Andrew Paprocki 0475169c13 hwmon: (it87) Support for 16-bit fan reading in it8712 >= rev 0x07
The it8712 chip supports 16-bit fan tachometers in revisions >= 0x07.
Revisions >= 0x08 dropped support for 8-bit fan divisor registers. The
patch enables 16-bit fan readings on all revisions >= 0x07 just like
the it8716 and it8718 chips.

Signed-off-by: Andrew Paprocki <andrew@ishiboo.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-08-06 22:41:06 +02:00
Frank Myhr 116d0486bd hwmon: (hwmon-vid) Add 6-bit vid codes for AMD NPT 0Fh cpus
AMD NPT 0Fh cpus use 6 bit VID codes. Successive codes with msb 0
describe 25mV decrements, while those with msb 1 describe 12.5mV
decrements. Existing hwmon-vid.c is correct only for codes with msb 0;
add support for the codes with msb 1.

Ref:
p 309, Table 71
AMD Publication 32559, BIOS and Kernel Developer's Guide for AMD NPT Family 0Fh Processors
http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/32559.pdf

Signed-off-by: Frank Myhr <fmyhr@fhmtech.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-08-06 22:41:06 +02:00
Frank Myhr 15872212e8 hwmon: (hwmon-vid) Trivial format multi-line comments per CodingStyle
Signed-off-by: Frank Myhr <fmyhr@fhmtech.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-08-06 22:41:06 +02:00
Sean MacLennan 6c633c3025 hwmon: ad7414 driver
Driver for the Analog Devices AD7414 temperature monitoring chip.

Signed-off-by: Sean MacLennan <smaclennan@pikatech.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-08-06 22:41:05 +02:00
Krzysztof Helt 84f768c163 hwmon: (thmc50) Add support for critical temperature limits
Add critical temperature limits to the driver. These limits are read
only.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-08-06 22:41:05 +02:00
Grant Coady 68f823de3f hwmon: (adm9240) Remove EXPERIMENTAL dependency
The adm9240 driver is in the kernel for three years now, time to
remove the EXPERIMENTAL dependency.

Signed-off-by: Grant Coady <gcoady.lk@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-08-06 22:41:05 +02:00
Jean Delvare 2f8ea97a45 hwmon: (w83627hf) Drop reset module parameter
Drop the reset parameter of the w83627hf driver. It seems it wasn't
that useful. It was dropped from the Linux 2.4 version of this driver
back in July 2004.

The only users who have reported that they were still using this
parameter, needed it to switch the chip from automatic fan speed
control back to manual mode. Now that the driver creates pwmN_enable
sysfs files, users will be able to use these files instead, which is
way less agressive.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Dominik Geyer <dominik.geyer@gmx.de>
2008-08-06 22:41:04 +02:00
Dominik Geyer a95a5ed856 hwmon: (w83627hf) Add pwm_enable sysfs interface
Adds support for pwm_enable sysfs interface for the w83627hf driver.

Signed-off-by: Dominik Geyer <dominik.geyer@gmx.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-08-06 22:41:04 +02:00
Marc Hulsman ad02ad85cf hwmon: (w83791d) Use fan divisor bits from vbat register
Update w83791d with fan bits in vbat mon register (7.48 of the
datasheet). This change allows all fans to have a divisor of 128, 
and fixes a problem with incorrectly reported fan speeds. 

Signed-off-by: Marc Hulsman <m.hulsman@tudelft.nl>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-08-06 22:41:04 +02:00
Jean Delvare 05a5e47768 hwmon: (f71882fg) Delete needless forward declarations
These functions aren't used before being defined, so there's no point
in forward-declaring them.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl>
2008-08-06 22:41:04 +02:00
Juerg Haefliger 549edb8332 hwmon: (dme1737) Add support for the SMSC SCH5027
Add support for the SCH5027. The differences to the DME1737 are:
- No support for programmable temp offsets
- In auto mode, PWM outputs stay on min value if temp goes below low threshold
  and can't be programmed to fully turn off
- Different voltage scaling
- No VID input

Signed-off-by: Juerg Haefliger <juergh@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-08-06 22:41:03 +02:00
Juerg Haefliger 55d68d75ab hwmon: (dme1737) Skip detection if forced
Skip the checking of the device ID register in the hwmon register
block if the force_id option is used.

Signed-off-by: Juerg Haefliger <juergh@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-08-06 22:41:03 +02:00
Juerg Haefliger 73ce48f6c6 hwmon: (dme1737) Cleanups
Fix names of attribute structs to make them more consistent with the 
rest of the code. Minor comment changes.

Signed-off-by: Juerg Haefliger <juergh at gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-08-06 22:41:03 +02:00
Linus Torvalds 6760561324 Merge branch 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6
* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6:
  hwmon: needs new maintainer
  hwmon: (lm85) Simplify device initialization function
  hwmon: (lm85) Misc cleanups
  hwmon: (lm85) Don't write back cached values
  hwmon: (lm85) Drop dead code
  hwmon: (lm85) Coding-style cleanups
  hwmon: (lm75) add new-style driver binding
  hwmon: (lm75) cleanup/reorg
  hwmon: (adt7473) clarify an awkward bit of code
  hwmon: (adt7473) Remove unused defines
  hwmon: (dme1737) fix voltage scaling
  hwmon: (dme1737) probe all addresses
  hwmon: (dme1737) demacrofy for readability
2008-08-01 11:33:19 -07:00
Jean Delvare 5f44759470 hwmon: (lm85) Simplify device initialization function
Clean up and simplify the device initialization function:
* Degrade error messages to warnings - what they really are.
* Stop warning about VxI mode, we don't really care.
* Drop comment about lack of limit initialization - that's the standard
  way, all hardware monitoring drivers do that.
* Only read the configuration register once.
* Only write back to the configuration register if needed.
* Don't attempt to clear the lock bit, it locks itself to 1.
* Move the function to before it's called, so that we no longer need to
  forware declare it.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-07-31 23:44:03 -04:00
Jean Delvare e89e22b23b hwmon: (lm85) Misc cleanups
Misc cleanups to the lm85 hardware monitoring driver:
* Mark constant arrays as const.
* Remove useless masks.
* Have lm85_write_value return void - nobody is checking the returned
  value anyway and in some cases it was plain wrong.
* Remove useless initializations.
* Rename new_client to client in lm85_detect.
* Replace cascaded if/else with a switch/case in lm85_detect.
* Group similar loops in lm85_update_device.
* Remove legacy comments.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Juerg Haefliger <juergh at gmail.com>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-07-31 23:44:03 -04:00
Jean Delvare 7133e56f29 hwmon: (lm85) Don't write back cached values
In set_pwm_auto_pwm_minctl, we write cached register bits back to the
chip. This is a bad idea as we have no guarantee that the cache is
up-to-date. Better read a fresh register value from the chip, it's
safer and in fact it is also more simple.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Juerg Haefliger <juergh at gmail.com>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-07-31 23:44:03 -04:00
Jean Delvare dd1ac5384a hwmon: (lm85) Drop dead code
Drop a lot of useless register defines, conversion macros, data structure
members and update code. All these register values were read from the
device but nothing is done out of them, so this is all dead code in
practice.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Juerg Haefliger <juergh at gmail.com>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-07-31 23:44:03 -04:00
Jean Delvare 1f44809ac3 hwmon: (lm85) Coding-style cleanups
Fix most style issues reported by checkpatch, including:
* Trailing, missing and extra whitespace
* Extra parentheses, curly braces and semi-colons
* Broken indentation
* Lines too long

I verified that the generated code is the same before and after
these changes.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Juerg Haefliger <juergh at gmail.com>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-07-31 23:44:03 -04:00
David Brownell 9ebd3d822e hwmon: (lm75) add new-style driver binding
More LM75 updates:

 - Teach the LM75 driver to use new-style driver binding:

     * Create a second driver struct, using new-style driver binding
       methods cribbed from the legacy code.

     * Add a MODULE_DEVICE_TABLE (for "newER-style binding")

     * The legacy probe logic delegates its work to this new code.

     * The legacy driver now uses the name "lm75_legacy".

 - More careful initialization.  Chips are put into 9-bit mode so
   the current interconversion routines will never fail.

 - Save the original chip configuration, and restore it on exit.
   (Among other things, this normally turns off the mode where
   the chip is constantly sampling ... and thus saves power.)

So the new-style code should catch all chips that boards declare,
while the legacy code catches others.  This particular coexistence
strategy may need some work yet ... legacy modes might best be set
up explicitly by some tool not unlike "sensors-detect".  (Or else
completely eradicated...)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-07-31 23:44:02 -04:00
David Brownell 01a52397e9 hwmon: (lm75) cleanup/reorg
Minor cleanup and reorg of the lm75 code.

 - Kconfig provides a larger list of lm75-compatible chips

 - A top comment now says what the driver does (!) ... as in, just
   what sort of sensor is this??

 - Section comments now delineate the various sections of the driver:
   hwmon attributes, driver binding, register access, module glue.
   One driver binding function moved out of the attribute section,
   as did the driver struct itself.

 - Minor tweaks to legacy probe logic:  correct a comment, and
   remove a pointless variable.

 - Whitespace, linelength, and comment fixes.

This patch should include no functional changes.  It's preparation
for adding new-style (driver model) I2C driver binding.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Laurent Pinchart <laurentp@cse-semaphore.com>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-07-31 23:44:02 -04:00
Mark M. Hoffman 321c413857 hwmon: (adt7473) clarify an awkward bit of code
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
2008-07-31 23:44:02 -04:00
Jean Delvare 9d3e19afd3 hwmon: (adt7473) Remove unused defines
All the *_MAX_ADDR defines are never used, so remove them. The number
of registers of each type is already expressed by the *_COUNT defines.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-07-31 23:44:02 -04:00
Juerg Haefliger f994fb23d3 hwmon: (dme1737) fix voltage scaling
This patch fixes a voltage scaling issue for the sch311x device.

Signed-Off-By: Juerg Haefliger <juergh at gmail.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-07-31 23:44:02 -04:00
Juerg Haefliger 92430b6feb hwmon: (dme1737) probe all addresses
This patch adds a module load parameter to enable probing of
non-standard LPC addresses 0x162e and 0x164e when scanning for supported
ISA chips.

Signed-Off-By: Juerg Haefliger <juergh at gmail.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-07-31 23:44:02 -04:00
Juerg Haefliger 9b257714a3 hwmon: (dme1737) demacrofy for readability
This patch gets rid of a couple of macros previously used for sysfs attribute
generation and manipulation. This makes the source a little bigger but a lot
more readable and maintainable. It also fixes an issue with pwm5 & pwm6
attributes not being created read-only initially.

Signed-Off-By: Juerg Haefliger <juergh at gmail.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-07-31 23:44:01 -04:00
Greg Kroah-Hartman 2871f55237 device create: hwmon: convert device_create to device_create_drvdata
device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.

Cc: Mark M. Hoffman <mhoffman@lightlink.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 21:54:42 -07:00
Dmitry Torokhov 908cf4b925 Merge master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 into next 2008-07-21 00:55:14 -04:00
Jean Delvare 33468e7637 hwmon: (w83l786ng) Convert to a new-style i2c driver
The new-style w83l786ng driver implements the optional detect()
callback to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Kevin Lo <kevlo@kevlo.org>
2008-07-16 19:30:18 +02:00
Jean Delvare dc18a4184d hwmon: (w83l785ts) Convert to a new-style i2c driver
The new-style w83l785ts driver implements the optional detect()
callback to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-07-16 19:30:18 +02:00
Jean Delvare a7f13a6ec4 hwmon: (w83793) Convert to a new-style i2c driver
The new-style w83793 driver implements the optional detect()
callback to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-07-16 19:30:17 +02:00
Jean Delvare 31d5d275a1 hwmon: (w83792d) Convert to a new-style i2c driver
The new-style w83792d driver implements the optional detect()
callback to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-07-16 19:30:17 +02:00
Jean Delvare cb0c1af379 hwmon: (w83791d) Convert to a new-style i2c driver
The new-style w83791d driver implements the optional detect()
callback to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Marc Hulsman <m.hulsman@tudelft.nl>
2008-07-16 19:30:17 +02:00
Jean Delvare ccf3748832 hwmon: (thmc50) Convert to a new-style i2c driver
The new-style thmc50 driver implements the optional detect()
callback to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Krzysztof Helt <krzysztof.h1@wp.pl>
2008-07-16 19:30:16 +02:00
Jean Delvare 8fb597bb6e hwmon: (smsc47m192) Convert to a new-style i2c driver
The new-style smsc47m192 driver implements the optional detect()
callback to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Hartmut Rick <linux@rick.claranet.de>
2008-07-16 19:30:16 +02:00
Jean Delvare 0d57abd5b8 hwmon: (max6650) Convert to a new-style i2c driver
The new-style max6650 driver implements the optional detect() callback
to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Hans J. Koch <hjk@linutronix.de>
2008-07-16 19:30:16 +02:00
Jean Delvare c6d3f6fa1b hwmon: (max1619) Convert to a new-style i2c driver
The new-style max1619 driver implements the optional detect() callback
to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Alexey Fisher <fishor@mail.ru>
2008-07-16 19:30:15 +02:00
Jean Delvare 70b724063f hwmon: (lm93) Convert to a new-style i2c driver
The new-style lm93 driver implements the optional detect() callback
to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Mark M. Hoffman <mhoffman@lightlink.com>
Cc: Eric J. Bowersox <ericb@aspsys.com>
Cc: Carsten Emde <cbe@osadl.org>
Cc: Hans J. Koch <hjk@linutronix.de>
2008-07-16 19:30:15 +02:00
Jean Delvare 910e8dcf16 hwmon: (lm92) Convert to a new-style i2c driver
The new-style lm92 driver implements the optional detect() callback
to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-07-16 19:30:15 +02:00
Jean Delvare 9b0e852692 hwmon: (lm90) Convert to a new-style i2c driver
The new-style lm90 driver implements the optional detect() callback
to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-07-16 19:30:15 +02:00
Jean Delvare a888420af0 hwmon: (lm87) Convert to a new-style i2c driver
The new-style lm87 driver implements the optional detect() callback
to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Ben Hutchings <bhutchings@solarflare.com>
2008-07-16 19:30:14 +02:00
Jean Delvare b6aacdcefa hwmon: (lm83) Convert to a new-style i2c driver
The new-style lm83 driver implements the optional detect() callback
to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-07-16 19:30:14 +02:00
Jean Delvare 8c8bacc883 hwmon: (lm80) Convert to a new-style i2c driver
The new-style lm80 driver implements the optional detect() callback
to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-07-16 19:30:14 +02:00
Jean Delvare a189dd62d3 hwmon: (lm77) Convert to a new-style i2c driver
The new-style lm77 driver implements the optional detect() callback
to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Andras Bali <drewie@freemail.hu>
2008-07-16 19:30:13 +02:00
Jean Delvare d5957be2f1 hwmon: (lm63) Convert to a new-style i2c driver
The new-style lm63 driver implements the optional detect() callback
to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-07-16 19:30:13 +02:00
Jean Delvare a23a9fe1d4 hwmon: (gl520sm) Convert to a new-style i2c driver
The new-style gl520sm driver implements the optional detect() callback
to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Maarten Deprez <maartendeprez@users.sourceforge.net>
2008-07-16 19:30:13 +02:00
Jean Delvare 95d80e7c83 hwmon: (gl518sm) Convert to a new-style i2c driver
The new-style gl518sm driver implements the optional detect() callback
to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-07-16 19:30:13 +02:00
Jean Delvare b9e39b1b1b hwmon: (fscpos) Convert to a new-style i2c driver
The new-style fscpos driver implements the optional detect() callback
to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-07-16 19:30:12 +02:00
Jean Delvare 40ac1994bf hwmon: (fschmd) Convert to a new-style i2c driver
The new-style fschmd driver implements the optional detect() callback
to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Hans de Goede <j.w.r.degoede@hhs.nl>
2008-07-16 19:30:12 +02:00
Jean Delvare c2df1591df hwmon: (fscher) Convert to a new-style i2c driver
The new-style fscher driver implements the optional detect() callback
to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Reinhard Nissl <rnissl@gmx.de>
2008-07-16 19:30:12 +02:00
Jean Delvare 935ada8c44 hwmon: (f75375s) Drop legacy i2c driver
Drop the legacy f75375s i2c driver, and add a detect callback to the
new-style i2c driver to achieve the same functionality.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Riku Voipio <riku.voipio@movial.fi>
2008-07-16 19:30:11 +02:00
Jean Delvare 70313eabfc hwmon: (ds1621) Convert to a new-style i2c driver
The new-style ds1621 driver implements the optional detect() callback
to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-07-16 19:30:11 +02:00
Jean Delvare 71163c7c36 hwmon: (atxp1) Convert to a new-style i2c driver
The new-style atxp1 driver implements the optional detect() callback
to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-07-16 19:30:11 +02:00
Jean Delvare 063675b156 hwmon: (asb100) Convert to a new-style i2c driver
The new-style asb100 driver implements the optional detect() callback
to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-07-16 19:30:11 +02:00
Jean Delvare eea54766c6 hwmon: (adt7473) Convert to a new-style i2c driver
The new-style adt7473 driver implements the optional detect() callback
to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Darrick J. Wong <djwong@us.ibm.com>
2008-07-16 19:30:10 +02:00
Jean Delvare 008f1ca51e hwmon: (adt7470) Convert to a new-style i2c driver
The new-style adt7470 driver implements the optional detect() callback
to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Darrick J. Wong <djwong@us.ibm.com>
2008-07-16 19:30:10 +02:00
Jean Delvare 7347cb388e hwmon: (ads7828) Convert to a new-style i2c driver
The new-style ads7828 driver implements the optional detect() callback
to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-07-16 19:30:10 +02:00
Jean Delvare 7fae828310 hwmon: (adm9240) Convert to a new-style i2c driver
The new-style adm9240 driver implements the optional detect() callback
to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Grant Coady <gcoady.lk@gmail.com>
2008-07-16 19:30:09 +02:00
Jean Delvare af200f881d hwmon: (adm1031) Convert to a new-style i2c driver
The new-style adm1031 driver implements the optional detect() callback
to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Alexandre d'Alton <alex@alexdalton.org>
2008-07-16 19:30:09 +02:00
Jean Delvare 9c97fb4d25 hwmon: (adm1029) Convert to a new-style i2c driver
The new-style adm1029 driver implements the optional detect() callback
to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Corentin Labbe <corentin.labbe@geomatys.fr>
2008-07-16 19:30:09 +02:00
Jean Delvare 57f7eb0bcb hwmon: (adm1026) Convert to a new-style i2c driver
The new-style adm1026 driver implements the optional detect() callback
to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-07-16 19:30:08 +02:00
Jean Delvare 7dbafe021b hwmon: (adm1025) Convert to a new-style i2c driver
The new-style adm1025 driver implements the optional detect() callback
to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-07-16 19:30:08 +02:00
Jean Delvare 65817ed8d1 hwmon: (adm1021) Convert to a new-style i2c driver
The new-style adm1021 driver implements the optional detect() callback
to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-07-16 19:30:08 +02:00
Jean Delvare 369932f6f8 hwmon: (ad7418) Convert to a new-style i2c driver
The ad7418 driver is only used on embedded platforms where i2c
devices can easily be declared in platform code. Thus a new-style
i2c driver makes perfect sense. This lets us get rid of quirky
detection code (these chips have no identification registers) and
shrinks the binary driver size by 38%.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
2008-07-16 19:30:08 +02:00
Benjamin Herrenschmidt 11c2d8174e Merge commit 'origin/HEAD' into test-merge
Manual fixup of include/asm-powerpc/pgtable-ppc64.h
2008-07-14 14:29:49 +10:00
maximilian attems 292d73551d hdaps: add support for various newer Lenovo thinkpads
Adds R61, T61p, X61s, X61, Z61m, Z61p models to whitelist.

Fixes this:

cullen@lenny:~$ sudo modprobe hdaps
FATAL: Error inserting hdaps (/lib/modules/2.6.22-10-generic/kernel/drivers/hwmon/hdaps.ko): No such device

[25192.888000] hdaps: supported laptop not found!
[25192.888000] hdaps: driver init failed (ret=-19)!

Originally based on an Ubuntu patch that got it wrong, the dmidecode
output of the corresponding laptops shows LENOVO as the manufacturer.
https://bugs.launchpad.net/ubuntu/+source/linux-source-2.6.22/+bug/133636

tested on X61s:
[  184.893588] hdaps: inverting axis readings.
[  184.893588] hdaps: LENOVO ThinkPad X61s detected.
[  184.893588] input: hdaps as /class/input/input12
[  184.924326] hdaps: driver successfully loaded.

Cc: Klaus S. Madsen <ubuntu@hjernemadsen.org>
Cc: Chuck Short <zulcss@ubuntu.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: maximilian attems <max@stro.at>
Cc: Mark M. Hoffman <mhoffman@lightlink.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-04 10:40:06 -07:00
Stephen Rothwell 7587cb2f12 hwmon: Use linux/of_platform.h instead of asm
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-30 22:30:31 +10:00
David Brownell bcccc3a28e hwmon: (lm75) sensor reading bugfix
LM75 sensor reading bugfix: never save error status as valid
sensor output.  This could be improved, but at least this
prevents certain rude failure modes.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-06-19 06:50:32 -04:00
Hans de Goede b3aeab0cdb hwmon: (abituguru3) update driver detection
It has been reported that the abituguru3 driver fails to load after a BIOS
update. This patch fixes this by loosening the detection routine so that it
will work after the BIOS update too. To compensate for the now very loose
detection an additional check is added on the DMI Base Board vendor string to
make sure we only load on Abit motherboards, this is the same as the check in
the abituguru (1 / 2) driver.

Signed-of-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-06-19 06:50:32 -04:00
Hans de Goede 1604e78b7d hwmon: (abituguru3) Identify Abit AW8D board as such
This patch identifies the Abit AW8D board as such, and adds support for its
aux5 fan connector

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-06-19 06:50:31 -04:00
Jean Delvare ed4ec814e4 hwmon: (adt7473) Initialize max_duty_at_overheat before use
data->max_duty_at_overheat is not updated in adt7473_update_device,
so it might be used before it is initialized (if the user reads from
sysfs file max_duty_at_crit before writing to it.)

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-06-19 06:50:31 -04:00
Jean Delvare d38b149794 hwmon: (lm85) Fix function RANGE_TO_REG()
Function RANGE_TO_REG() is broken. For a requested range of 2000 (2
degrees C), it will return an index value of 15, i.e. 80.0 degrees C,
instead of the expected index value of 0. All other values are handled
properly, just 2000 isn't.

The bug was introduced back in November 2004 by this patch:
http://git.kernel.org/?p=linux/kernel/git/tglx/history.git;a=commit;h=1c28d80f1992240373099d863e4996cdd5d646d0

While this can be fixed easily with the current code, I'd rather
rewrite the whole function in a way which is more obviously correct.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Justin Thiessen <jthiessen@penguincomputing.com>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-06-19 06:50:31 -04:00
Tim Gardner a4fa7ef037 hdaps: fix module loading on Thinkpad T61P
Adds DMI system identifier for ThinkPad T61.

Originally written by Klaus S. Madsen.

Taken from http://launchpadlibrarian.net/10864950/hdaps-t61.patch

Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: maximilian attems <max@stro.at>
Cc: Klaus S. Madsen <ubuntu@hjernemadsen.org>
Cc: Mark M. Hoffman <mhoffman@lightlink.com>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-06 11:29:13 -07:00
Al Viro a064d5bdd0 ibmaem endianness annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-04 08:06:01 -07:00
Darrick J. Wong 8808a793f0 ibmaem: new driver for power/energy/temp meters in IBM System X hardware
This driver reads IBM Active Energy Manager energy/temperature/power
sensors on IBM System X hardware.

[akpm@linux-foundation.org: fix printk warnings]
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Cc: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-24 09:56:08 -07:00
Darrick J. Wong b8fdaf5a05 i5k_amb: support Intel 5400 chipset
Minor rework to support the Intel 5400 chipset.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-24 09:56:08 -07:00
Gabor Czigola ca68d0ac16 hdaps: invert the axes for HDAPS on Lenovo R61i ThinkPads
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Jiri Kosina <jikos@jikos.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-24 09:56:08 -07:00
Dmitry Torokhov d2fc60d692 HWMON: hdaps - set up phys and bus type of input device
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-05-16 14:49:56 -04:00
Linus Torvalds c92758ceda Merge branch 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6
* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6:
  hwmon: (adt7473) minor cleanup / refactoring
  hwmon: (asb100) Remove some dead code
  hwmon: (lm75) Fix an incorrect comment
  hwmon: (w83793) VID and VRM handling cleanups
  hwmon: (w83l785ts) Don't ask the user to report failures
  hwmon: (smsc47b397) add a new chip id (0x8c)
2008-05-01 08:28:26 -07:00
Mark M. Hoffman 4f02f82205 Merge branch 'smsc47b397-new-id' into release 2008-05-01 07:33:17 -04:00
Harvey Harrison 145980a0b0 drivers: replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 08:29:53 -07:00
Jean Delvare 3760f73671 i2c: Convert most new-style drivers to use module aliasing
Based on earlier work by Jon Smirl and Jochen Friedrich.

Update most new-style i2c drivers to use standard module aliasing
instead of the old driver_name/type driver matching scheme. I've
left the video drivers apart (except for SoC camera drivers) as
they're a bit more diffcult to deal with, they'll have their own
patch later.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Jon Smirl <jonsmirl@gmail.com>
Cc: Jochen Friedrich <jochen@scram.de>
2008-04-29 23:11:40 +02:00
Jean Delvare d2653e9273 i2c: Add support for device alias names
Based on earlier work by Jon Smirl and Jochen Friedrich.

This patch allows new-style i2c chip drivers to have alias names using
the official kernel aliasing system and MODULE_DEVICE_TABLE(). At this
point, the old i2c driver binding scheme (driver_name/type) is still
supported.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Jochen Friedrich <jochen@scram.de>
Cc: Jon Smirl <jonsmirl@gmail.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
2008-04-29 23:11:39 +02:00
Mark M. Hoffman 1852448652 hwmon: (adt7473) minor cleanup / refactoring
Acked-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-04-27 09:23:12 -04:00
Mark M. Hoffman 5d822e9bd9 hwmon: (asb100) Remove some dead code
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-04-27 09:23:12 -04:00
Jean Delvare ccd6befceb hwmon: (lm75) Fix an incorrect comment
High-byte first is not opposite to the usual practice - that's what
almost all hardware monitoring drivers do. It is opposite to the SMBus
standard though.

Also delete a duplicate comment.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-04-27 09:23:12 -04:00
Jean Delvare 93c75a4ac2 hwmon: (w83793) VID and VRM handling cleanups
* Rework the device initialization function so as to read the
"Multi-Function Pin Control" register (0x58) once instead of twice.
I2C transactions aren't cheap so this speeds up the driver loading.

* Only create the "vrm" attribute if at least one VID value is
available.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Gong Jun <jgong@winbond.com>
Acked-by: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-04-27 09:23:12 -04:00
Jean Delvare 4040c415f5 hwmon: (w83l785ts) Don't ask the user to report failures
There's nothing we can do about read errors on the W83L785TS-S, so
don't ask the user to report them.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-04-27 09:23:11 -04:00
Jean Delvare 2961cb22ef hwmon: (w83781d) Fix I/O resource conflict with PNP
Only request I/O ports 0x295-0x296 instead of the full I/O address
range. This solves a conflict with PNP resources on a few motherboards.

Also request the I/O ports in two parts (4 low ports, 4 high ports)
during device detection, otherwise the PNP resource makes the request
(and thus the detection) fail.

This fixes lm-sensors ticket #2306:
http://www.lm-sensors.org/ticket/2306

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-03-27 08:40:41 -04:00
Darrick J. Wong ffda6857c8 ibmpex: report temperatures in mC, not C
ibmpex's temperature sensors report incorrect units.  Apply a conversion
factor so that tempertures report correctly.  Until now, no systems seemed to
report temperatures this way, but evidently QS2x blades do.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-19 18:53:36 -07:00
Darrick J. Wong 3d960a99ab ibmpex: update Kconfig to list more supported models
Enhanced the list of supported machines.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Cc: Mark M. Hoffman <mhoffman@lightlink.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-19 18:53:35 -07:00
Darrick J. Wong df9cb0339f ibmpex: correct power use multipliers for QS2x blade
The QS2x blades ships with v2.54 of the firmware, which use the same
multiplier for all power meters.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Cc: Mark M. Hoffman <mhoffman@lightlink.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-19 18:53:35 -07:00
Craig Kelley 809307768c hwmon: (smsc47b397) add a new chip id (0x8c)
Added a new ID (0x8c) for the smsc47b397 hardware monitor driver.
This ID is used by HP in, at least, their dc7700 line.

Signed-off-by: Craig Kelley <namonai@gmail.com>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-03-02 14:21:35 -05:00
Mark M. Hoffman 25e9c86d5a hwmon: normal_i2c arrays should be const
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-18 21:58:15 -05:00
Darrick J. Wong 57df46d6d9 hwmon: New driver for Analog Devices ADT7473 sensor chip
This driver reports voltage, temperature and fan sensor readings
on an ADT7473 chip.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-18 21:51:29 -05:00
Rudolf Marek ae770152c8 hwmon: (coretemp) Add Penryn CPU to coretemp
This patch adds support for family 0x17, which has Penryn Core. It should also
cover the 8 cores Xeons.

Can someone test please? I think it should work.

Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-17 22:08:37 -05:00
Rudolf Marek 118a887188 hwmon: (coretemp) Add TjMax detection for mobile CPUs
Following patch will finally solve the detection of Intel Mobile CPUs which
share same CPUID with Desktop/Server CPUs. We need this information to test
some bit so we know if TjMax is 100C or 85C. Intel claims this works for mobiles
only, respect that and set for desktops the TjMax to 100C. Intel provided some
table on their wiki based on my chat with them at:
http://softwarecommunity.intel.com/isn/Community/en-US/forums/30247249/ShowThread.aspx#30247249

Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-17 21:57:28 -05:00
Riki Oktarianto cd19ba1391 hwmon: (applesmc) sensors set for MacBook2
On my mid-2007 MacBook2, reading Ts0P sensor always failed with this message:
applesmc: wait status failed: 5 != 50.

So I assume that there's no such Ts0p sensor in this model (please confirm,
anyone). If there's the case, then we need a new set of sensors defined for
MacBook2.

Signed-off-by: Riki Oktarianto <rkoktarianto@gmail.com>
Cc: Nicolas Boichat <nicolas@boichat.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-17 15:04:14 -05:00
Tobias Klauser 5910a9b2b1 hwmon: (thmc50) Storage class should be before const qualifier
The C99 specification states in section 6.11.5:

The placement of a storage-class specifier other than at the
beginning of the declaration specifiers in a declaration is an
obsolescent feature.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-17 12:11:50 -05:00
Sam Ravnborg ba7c1927aa hwmon: (coretemp) fix section mismatch warning
Fix following warning:
WARNING: vmlinux.o(.text+0xebfd04): Section mismatch in reference from the function coretemp_cpu_callback() to the function .cpuinit.text:coretemp_device_add()

coretemp_cpu_callback() are only used inside a
HOTPLUG_CPU block so annotate it __cpuinit.
The notifier referencing the function are annotated
__refdata to silence warning from the exit function.
The unregister function do not use the embedded pointer
but clears the variable so the annotation is OK.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-17 11:26:55 -05:00
Rudolf Marek 6369a2887a hwmon: (coretemp) Add maximum cooling temperature readout
Following patch will add reporting of maximum temperature, at which all fans
should spin full speed. It may be non-physical temperature on Desktop/Server CPUs.

Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-17 10:21:39 -05:00
Jean Delvare 1d5f2c16c6 hwmon: (adm1026) Properly terminate sysfs groups
The missing NULL at the end of two sysfs file groups causes a kernel
crash when calling sysfs_create_group().

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-17 09:27:19 -05:00
Roger Lucas af865765a9 hwmon: (vt8231) Update maintainer email address
Signed-off-by: Roger Lucas <vt8231@hiddenengine.co.uk>

(modified MAINTAINERS entry also - MMH)

Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-17 09:27:19 -05:00
Jean Delvare 2d1374cad5 hwmon: (vt8231) Add individual alarm files
The new libsensors needs these individual alarm files.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
CC: Roger Lucas <vt8231@hiddenengine.co.uk>
Acked-by: Juerg Haefliger <juergh at gmail.com>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-17 09:27:18 -05:00
Jean Delvare 13ff05e9f8 hwmon: (via686a) Add individual alarm files
The new libsensors needs these individual alarm files.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Juerg Haefliger <juergh at gmail.com>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-17 09:27:18 -05:00
Jean Delvare 1f08af7ea9 hwmon: (smsc47m1) Add individual alarm files
The new libsensors needs these individual alarm files.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Juerg Haefliger <juergh at gmail.com>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-17 09:27:18 -05:00
Jean Delvare 71062ffcd5 hwmon: (max1619) Add individual alarm and fault files
The new libsensors needs these individual alarm and fault files.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Juerg Haefliger <juergh at gmail.com>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-17 09:27:18 -05:00
Jean Delvare 6cb59e915d hwmon: (lm92) Add individual alarm files
The new libsensors needs these individual alarm files.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Juerg Haefliger <juergh at gmail.com>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-17 09:27:18 -05:00
Jean Delvare e84542f5db hwmon: (lm80) Add individual alarm files
The new libsensors needs these individual alarm files.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-07 20:39:45 -05:00
Jean Delvare f8181762a0 hwmon: (lm80) De-macro the sysfs callbacks
Use standard dynamic sysfs callbacks instead of macro-generated
functions. This makes the code more readable, and the binary smaller
(by about 34%).

As a side note, another benefit of this type of cleanup is that they
shrink the build time. For example, this cleanup saves about 29% of
the lm80 driver build time.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-07 20:39:45 -05:00
Jean Delvare 6cc37ee536 hwmon: (lm80) Various cleanups
* Drop trailing whitespace
* Fold a long line
* Rename new_client to client
* Drop redundant initializations to 0
* Drop bogus comment

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-07 20:39:45 -05:00
Jean Delvare 1c1381076f hwmon: (w83627hf) Refactor beep enable handling
We can handle the beep enable bit as any other beep mask bit for
slightly smaller code.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-07 20:39:45 -05:00
Jean Delvare e3604c626c hwmon: (w83627hf) Add individual alarm and beep files
The new libsensors needs these individual alarm and beep files. The
code was copied from the w83781d driver. I've tested the alarm files
on a W83627THF. I couldn't test the beep files as the system in
question doesn't have a speaker.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-07 20:39:45 -05:00
Jean Delvare ef878b11ba hwmon: (w83627hf) Enable VBAT monitoring
If VBAT monitoring is disabled, enable it. Bug reported on the
lm-sensors trac system:
http://lm-sensors.org/ticket/2282
This is the exact same patch that was applied to the w83627ehf driver
6 months ago.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-07 20:39:45 -05:00
Jean Delvare cbe311f2a4 hwmon: (w83627ehf) The W83627DHG has 8 VID pins
While the W83627EHF/EHG has only 6 VID pins, the W83627DHG has 8 VID
pins, to support VRD 11.0. Add support for this.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-07 20:39:45 -05:00
Jean Delvare 636866b9f0 hwmon: (asb100) Add individual alarm files
The new libsensors needs these individual alarm files.

I did not create alarm files for in5 and in6 as these alarms are documented
as not working.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-07 20:39:44 -05:00
Jean Delvare fad33c5fda hwmon: (asb100) De-macro the sysfs callbacks
Use standard dynamic sysfs callbacks instead of macro-generated
wrappers. This makes the code more readable, and the binary smaller
(by about 12%).

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-07 20:39:44 -05:00
Jean Delvare af22193151 hwmon: (asb100) Various cleanups
* Drop history, it's incomplete and doesn't belong there
* Drop unused version number
* Drop trailing spaces
* Coding style fixes
* Fold long lines
* Rename new_client to client
* Drop redundant initializations to 0

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-07 20:39:44 -05:00
Jean Delvare 8f74efe81d hwmon: VRM is not written to registers
What was true of reading the VRM value is also true of writing it: not
being a register value, it doesn't need hardware access, so we don't
need a reference to the i2c client. This allows for a minor code
cleanup. As gcc appears to be smart enough to simplify the generated
code by itself, this cleanup only affects the source code, the
generated binaries are unchanged.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-07 20:39:44 -05:00
Juerg Haefliger 345a222454 hwmon: (dme1737) fix Super-IO device ID override
The dme1737 has a second place where the Super-IO device ID is
checked. This has been missed by Jean's initial patch that adds
support for user-controlled Super-IO device ID override. This patch
fixes this issue.

Signed-off-by: Juerg Haefliger <juergh at gmail.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-07 20:39:44 -05:00
Juerg Haefliger ff8421f733 hwmon: (dme1737) fix divide-by-0
This patch fixes a possible divide-by-0 and a minor bug in the
FAN_FROM_REG macro (in TPC mode).

Signed-off-by: Juerg Haefliger <juergh at gmail.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-07 20:39:44 -05:00
Sergey Vlasov cb96b8ca11 hwmon: (abituguru3) Add AUX4 fan input for Abit IP35 Pro
Abit IP35 Pro has 6 fan connectors (CPU, SYS and AUX1-4), but the
entry for AUX4 was missing from the table.

Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-07 20:39:44 -05:00
Steve Hardy 5812f9283e hwmon: Add support for Texas Instruments/Burr-Brown ADS7828
Signed-off-by: Steve Hardy <steve@linuxrealtime.co.uk>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-07 20:39:44 -05:00
Jean Delvare 360f9452de hwmon: (adm9240) Add individual alarm files
The new libsensors needs these individual alarm files.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Grant Coady <gcoady.lk@gmail.com>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-07 20:39:44 -05:00
Jean Delvare 1f52af0f69 hwmon: (lm77) Add individual alarm files
The new libsensors needs this. As the old library never had support for
the lm77 driver, I even dropped the legacy "alarms" file.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-07 20:39:44 -05:00
Jean Delvare 7b501b1f53 hwmon: Discard useless I2C driver IDs
Many I2C hwmon drivers define a driver ID but no other code references
these, meaning that they are useless. Discard them, along with a few
IDs which are defined but never used at all.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-07 20:39:44 -05:00
Jean Delvare 455f791ea3 hwmon: (lm85) Make the pwmN_enable files writable
Make the pwmN_enable files writable. This makes it possible to use
standard fan speed control tools (pwmconfig, fancontrol) with the lm85
driver.

I left the non-standard pwmN_auto_channels files in place, as they
give additional control for the automatic mode, and some users might
be used to them by now.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-07 20:39:43 -05:00
Jean Delvare 4b4df95dcc hwmon: (lm85) Return standard values in pwmN_enable
The values returned by the lm85 driver in pwmN_enable sysfs files do
not match the standard. Fix that.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-07 20:39:43 -05:00
Jean Delvare 050ab87898 hwmon: (adm1031) Add individual alarm and fault files
The new libsensors needs these.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-07 20:39:43 -05:00
Jean Delvare c801082d7d hwmon: (adm1031) Get rid of macro-generated wrappers
Use the standard dynamic sysfs callbacks instead of macro-generated
wrappers. It makes the code more simple and the binary smaller (-8% on
my system.)

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-07 20:39:43 -05:00
Jean Delvare 6d6006b8db hwmon: (adm1031) Various cleanups
* Rename new_client to client
* Drop redundant initializations to 0
* Drop trailing space
* Other whitespace cleanups
* Split/fold a few long lines
* Constify static data
* Optimizations in set_fan_div()

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-07 20:39:43 -05:00
Jean Delvare 38a1f0e9ae hwmon: (adm1031) Fix register overwrite in set_fan_div()
Don't rely on the register cache when setting a new fan clock divider.
For one thing, the cache might not have been initialized at all if the
driver has just been loaded. For another, the cached values may be old
and you never know what can happen in the driver's back.

Also invalidate the cache instead of trying to adjust the measured fan
speed: the whole point of changing the clock divider is to get a better
reading.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-07 20:39:43 -05:00
Jean Delvare d5b0b5d628 hwmon: (it87) Delete pwmN_freq files on driver removal
In commit f8d0c19a93 I forgot to delete
the pwmN_freq files on driver removal, here's the fix.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Riku Voipio <riku.voipio@movial.fi>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-07 20:39:43 -05:00
Jean Delvare 293c099716 hwmon: (w83781d) Misc cleanups
* Drop unused defines
* Drop unused driver ID
* Remove trailing whitespace

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-07 20:39:43 -05:00
Jean Delvare 05663368d2 hwmon: (w83781d) Drop W83627HF support
The W83627HF hardware monitoring features are supported by the
w83627hf driver for several years now. Support by the w83781d has
been advertised as deprecated 6 months ago, it's about time to see
it go.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-07 20:39:43 -05:00
Jean Delvare 5b34dbcd88 hwmon: (adm1026) Don't create files for missing inputs
On the ADM1026, pins 27 and 28 can be used for two different functions:
either temp3, or in8+in9. We should only create the sysfs files for the
function that is configured, otherwise it is confusing for the user.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-07 20:39:43 -05:00
Jean Delvare f67fdabfb9 hwmon: (adm1026) More cleanups (updated)
Various cleanups:
* Drop an unused define.
* Drop unused struct member "type".
* Drop one useless instruction.
* Drop redundant initializations to 0.
* Rename new_client to client.
* Drop a useless cast.
* Minor code cleanup.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-07 20:39:42 -05:00
Jean Delvare cb01a2312f hwmon: (adm1026) Whitespace cleanups
Whitespace cleanups only:
* Trim trailing whitespace.
* Use tabs for indentation and alignment.
* Add missing space after commas.
* Remove extra spaces.

No functional change, binary is identical before and after this patch.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-07 20:39:42 -05:00
Jean Delvare a9273cb8ee hwmon: (adm1026) Add individual alarm files
The new libsensors needs these.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-07 20:39:42 -05:00
Jean Delvare 0124dd78e2 hwmon: (it87) Add individual alarm files
The new libsensors needs this.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-07 20:39:42 -05:00