Commit Graph

33 Commits

Author SHA1 Message Date
Will Schmidt c3412dcb75 [POWERPC] Emulate power5 popcntb instruction
In an attempt to make it easier for a power5 optimized app to run on a
power4 or a 970 or random earlier machine, this provides emulation of
the popcntb instruction.

Signed-off-by: Will Schmidt <will_schmidt@vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-13 18:39:52 +10:00
Greg Kroah-Hartman ccc712fe6b Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc 2006-08-23 21:08:12 -07:00
Paul Mackerras 87589f08be [POWERPC] Correct masks used in emulating some instructions
When we get an illegal instruction exception, we check to see whether
the instruction is one that we emulate for the user program.  Some of
the masks we use in checking whether the offending instruction is one
we care about didn't have the top bit set, which is the MSB of the
major opcode.  Thus some undefined opcodes could get emulated as other
(defined but unimplemented) instructions.  This corrects the masks.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-23 16:58:39 +10:00
Greg Kroah-Hartman ed0da6fc9d Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc 2006-08-18 09:20:04 -07:00
Michael Ellerman b6f35b4966 [POWERPC] Make crash.c work on 32-bit and 64-bit
To compile kexec on 32-bit we need a few more bits and pieces. Rather
than add empty definitions, we can make crash.c work on 32-bit, with
only a couple of kludges.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-17 16:41:10 +10:00
David Wilder eac8392f95 [POWERPC] Make secondary CPUs call into kdump on reset exception
In the case of a system hang, the user will invoke soft-reset to
initiate the kdump boot.  If xmon is enabled, the CPU(s) enter into the
xmon debugger.   Unfortunately, the secondary CPU(s) will return to the
hung state when they exit from the debugger (returned from die() ->
system_reset_exception()).  This causes a problem in kdump since the
hung CPU(s) will not respond to the IPI sent from kdump.  This patch
fixes the issue by calling crash_kexec_secondary() directly from
system_reset_exception() without returning to the previous state.  These
secondary CPUs wait 5ms until the kdump boot is started by the primary
CPU.   In the case we exited from the debugger to "recover" (command 'x'
in xmon) the primary and the secondary CPUs will all return from die()
-> system_reset_exception() ->crash_kexec_secondary() wait 5ms, then
return to the previous state.  A kdump boot is not started in this case.

Signed-off-by: Haren Myneni <haren@us.ibm.com>
Signed-off-by: David Wilder <dwilder@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-17 16:41:10 +10:00
Horms 012c437d03 [PATCH] Change panic_on_oops message to "Fatal exception"
Previously the message was "Fatal exception: panic_on_oops", as introduced
in a recent patch whith removed a somewhat dangerous call to ssleep() in
the panic_on_oops path.  However, Paul Mackerras suggested that this was
somewhat confusing, leadind people to believe that it was panic_on_oops
that was the root cause of the fatal exception.  On his suggestion, this
patch changes the message to simply "Fatal exception".  A suitable oops
message should already have been displayed.

Signed-off-by: Simon Horman <horms@verge.net.au>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-14 12:54:29 -07:00
Horms cea6a4ba8a [PATCH] panic_on_oops: remove ssleep()
This patch is part of an effort to unify the panic_on_oops behaviour across
all architectures that implement it.

It was pointed out to me by Andi Kleen that if an oops has occured in
interrupt context, then calling sleep() in the oops path will only cause a
panic, and that it would be really better for it not to be in the path at
all.

This patch removes the ssleep() call and reworks the console message
accordinly.  I have a slght concern that the resulting console message is
too long, feedback welcome.

For powerpc it also unifies the 32bit and 64bit behaviour.

Fror x86_64, this patch only updates the console message, as ssleep() is
already not present.

Signed-off-by: Horms <horms@verge.net.au>
Acked-by: Paul Mackerras <paulus@samba.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Andi Kleen <ak@muc.de>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-31 13:28:39 -07:00
Jörn Engel 6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
David Wilder c0ce7d0886 [POWERPC] Add the use of the firmware soft-reset-nmi to kdump.
With this patch, kdump uses the firmware soft-reset NMI for two purposes:
1) Initiate the kdump (take a crash dump) by issuing a soft-reset.
2) Break a CPU out of a deadlock condition that is detected during kdump
processing.

When a soft-reset is initiated each CPU will enter
system_reset_exception() and set its corresponding bit in the global
bit-array cpus_in_sr then call die(). When die() finds the CPU's bit set
in cpu_in_sr crash_kexec() is called to initiate a crash dump. The first
CPU to enter crash_kexec() is called the "crashing CPU". All other CPUs
are "secondary CPUs". The secondary CPU's pass through to
crash_kexec_secondary() and sleep. The crashing CPU waits for all CPUs
to enter via soft-reset then boots the kdump kernel (see
crash_soft_reset_check())

When the system crashes due to a panic or exception, crash_kexec() is
called by panic() or die(). The crashing CPU sends an IPI to all other
CPUs to notify them of the pending shutdown. If a CPU is in a deadlock
or hung state with interrupts disabled, the IPI will not be delivered.
The result being, that the kdump kernel is not booted. This problem is
solved with the use of a firmware generated soft-reset. After the
crashing_cpu has issued the IPI, it waits for 10 sec for all CPUs to
enter crash_ipi_callback(). A CPU signifies its entry to
crash_ipi_callback() by setting its corresponding bit in the
cpus_in_crash bit array. After 10 sec, if one or more CPUs have not set
their bit in cpus_in_crash we assume that the CPU(s) is deadlocked. The
operator is then prompted to generate a soft-reset to break the
deadlock. Each CPU enters the soft reset handler as described above.

Two conditions must be handled at this point:
1) The system crashed because the operator generated a soft-reset. See
2) The system had crashed before the soft-reset was generated ( in the
case of a Panic or oops).

The first CPU to enter crash_kexec() uses the state of the kexec_lock to
determine this state. If kexec_lock is already held then condition 2 is
true and crash_kexec_secondary() is called, else; this CPU is flagged as
the crashing CPU, the kexec_lock is acquired and crash_kexec() proceeds
as described above.

Each additional CPUs responding to the soft-reset will pass through
crash_kexec() to kexec_secondary(). All secondary CPUs call
crash_ipi_callback() readying them self's for the shutdown. When ready
they clear their bit in cpus_in_sr. The crashing CPU waits in
kexec_secondary() until all other CPUs have cleared their bits in
cpus_in_sr. The kexec kernel boot is then started.

Signed-off-by: Haren Myneni <haren@us.ibm.com>
Signed-off-by: David Wilder <dwilder@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-28 15:18:52 +10:00
Michael Hanselmann 5474c120aa [PATCH] Rewritten backlight infrastructure for portable Apple computers
This patch contains a total rewrite of the backlight infrastructure for
portable Apple computers.  Backward compatibility is retained.  A sysfs
interface allows userland to control the brightness with more steps than
before.  Userland is allowed to upload a brightness curve for different
monitors, similar to Mac OS X.

[akpm@osdl.org: add needed exports]
Signed-off-by: Michael Hanselmann <linux-kernel@hansmi.ch>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25 10:00:59 -07:00
Paul Mackerras e9370ae15d [PATCH] powerpc: Implement PR_[GS]ET_UNALIGN prctls for powerpc
This gives the ability to control whether alignment exceptions get
fixed up or reported to the process as a SIGBUS, using the existing
PR_SET_UNALIGN and PR_GET_UNALIGN prctls.  We do not implement the
option of logging a message on alignment exceptions.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-09 21:24:16 +10:00
Paul Mackerras fab5db97e4 [PATCH] powerpc: Implement support for setting little-endian mode via prctl
This adds the PowerPC part of the code to allow processes to change
their endian mode via prctl.

This also extends the alignment exception handler to be able to fix up
alignment exceptions that occur in little-endian mode, both for
"PowerPC" little-endian and true little-endian.

We always enter signal handlers in big-endian mode -- the support for
little-endian mode does not amount to the creation of a little-endian
user/kernel ABI.  If the signal handler returns, the endian mode is
restored to what it was when the signal was delivered.

We have two new kernel CPU feature bits, one for PPC little-endian and
one for true little-endian.  Most of the classic 32-bit processors
support PPC little-endian, and this is reflected in the CPU feature
table.  There are two corresponding feature bits reported to userland
in the AT_HWCAP aux vector entry.

This is based on an earlier patch by Anton Blanchard.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-09 21:24:15 +10:00
Kumar Gala 1a6a4ffef6 powerpc: merge machine_check_exception between ppc32 & ppc64
Make machine_check_exception handling code path the same on ppc32 & ppc64.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2006-03-30 21:11:15 -06:00
Paul Mackerras bac30d1a78 Merge ../linux-2.6 2006-03-29 13:24:50 +11:00
Benjamin Herrenschmidt e8222502ee [PATCH] powerpc: Kill _machine and hard-coded platform numbers
This removes statically assigned platform numbers and reworks the
powerpc platform probe code to use a better mechanism.  With this,
board support files can simply declare a new machine type with a
macro, and implement a probe() function that uses the flattened
device-tree to detect if they apply for a given machine.

We now have a machine_is() macro that replaces the comparisons of
_machine with the various PLATFORM_* constants.  This commit also
changes various drivers to use the new macro instead of looking at
_machine.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-28 23:15:54 +11:00
Alan Stern e041c68341 [PATCH] Notifier chain update: API changes
The kernel's implementation of notifier chains is unsafe.  There is no
protection against entries being added to or removed from a chain while the
chain is in use.  The issues were discussed in this thread:

    http://marc.theaimsgroup.com/?l=linux-kernel&m=113018709002036&w=2

We noticed that notifier chains in the kernel fall into two basic usage
classes:

	"Blocking" chains are always called from a process context
	and the callout routines are allowed to sleep;

	"Atomic" chains can be called from an atomic context and
	the callout routines are not allowed to sleep.

We decided to codify this distinction and make it part of the API.  Therefore
this set of patches introduces three new, parallel APIs: one for blocking
notifiers, one for atomic notifiers, and one for "raw" notifiers (which is
really just the old API under a new name).  New kinds of data structures are
used for the heads of the chains, and new routines are defined for
registration, unregistration, and calling a chain.  The three APIs are
explained in include/linux/notifier.h and their implementation is in
kernel/sys.c.

With atomic and blocking chains, the implementation guarantees that the chain
links will not be corrupted and that chain callers will not get messed up by
entries being added or removed.  For raw chains the implementation provides no
guarantees at all; users of this API must provide their own protections.  (The
idea was that situations may come up where the assumptions of the atomic and
blocking APIs are not appropriate, so it should be possible for users to
handle these things in their own way.)

There are some limitations, which should not be too hard to live with.  For
atomic/blocking chains, registration and unregistration must always be done in
a process context since the chain is protected by a mutex/rwsem.  Also, a
callout routine for a non-raw chain must not try to register or unregister
entries on its own chain.  (This did happen in a couple of places and the code
had to be changed to avoid it.)

Since atomic chains may be called from within an NMI handler, they cannot use
spinlocks for synchronization.  Instead we use RCU.  The overhead falls almost
entirely in the unregister routine, which is okay since unregistration is much
less frequent that calling a chain.

Here is the list of chains that we adjusted and their classifications.  None
of them use the raw API, so for the moment it is only a placeholder.

  ATOMIC CHAINS
  -------------
arch/i386/kernel/traps.c:		i386die_chain
arch/ia64/kernel/traps.c:		ia64die_chain
arch/powerpc/kernel/traps.c:		powerpc_die_chain
arch/sparc64/kernel/traps.c:		sparc64die_chain
arch/x86_64/kernel/traps.c:		die_chain
drivers/char/ipmi/ipmi_si_intf.c:	xaction_notifier_list
kernel/panic.c:				panic_notifier_list
kernel/profile.c:			task_free_notifier
net/bluetooth/hci_core.c:		hci_notifier
net/ipv4/netfilter/ip_conntrack_core.c:	ip_conntrack_chain
net/ipv4/netfilter/ip_conntrack_core.c:	ip_conntrack_expect_chain
net/ipv6/addrconf.c:			inet6addr_chain
net/netfilter/nf_conntrack_core.c:	nf_conntrack_chain
net/netfilter/nf_conntrack_core.c:	nf_conntrack_expect_chain
net/netlink/af_netlink.c:		netlink_chain

  BLOCKING CHAINS
  ---------------
arch/powerpc/platforms/pseries/reconfig.c:	pSeries_reconfig_chain
arch/s390/kernel/process.c:		idle_chain
arch/x86_64/kernel/process.c		idle_notifier
drivers/base/memory.c:			memory_chain
drivers/cpufreq/cpufreq.c		cpufreq_policy_notifier_list
drivers/cpufreq/cpufreq.c		cpufreq_transition_notifier_list
drivers/macintosh/adb.c:		adb_client_list
drivers/macintosh/via-pmu.c		sleep_notifier_list
drivers/macintosh/via-pmu68k.c		sleep_notifier_list
drivers/macintosh/windfarm_core.c	wf_client_list
drivers/usb/core/notify.c		usb_notifier_list
drivers/video/fbmem.c			fb_notifier_list
kernel/cpu.c				cpu_chain
kernel/module.c				module_notify_list
kernel/profile.c			munmap_notifier
kernel/profile.c			task_exit_notifier
kernel/sys.c				reboot_notifier_list
net/core/dev.c				netdev_chain
net/decnet/dn_dev.c:			dnaddr_chain
net/ipv4/devinet.c:			inetaddr_chain

It's possible that some of these classifications are wrong.  If they are,
please let us know or submit a patch to fix them.  Note that any chain that
gets called very frequently should be atomic, because the rwsem read-locking
used for blocking chains is very likely to incur cache misses on SMP systems.
(However, if the chain's callout routines may sleep then the chain cannot be
atomic.)

The patch set was written by Alan Stern and Chandra Seetharaman, incorporating
material written by Keith Owens and suggestions from Paul McKenney and Andrew
Morton.

[jes@sgi.com: restructure the notifier chain initialization macros]
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27 08:44:50 -08:00
Paul Mackerras cd8a5673e9 powerpc: Fix might-sleep warning in program check exception handler
On 32-bit, the exception prolog for the program check exception doesn't
enable interrupts early on.  If it is an illegal instruction exception,
we read the instruction in order to emulate certain instructions, and
the get_user of the instruction triggers a WARN_ON since interrupts
are still disabled.  This adds a local_irq_enable() to enable
interrupts before reading the instruction.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-03 17:11:40 +11:00
Arnd Bergmann c902be71dc [PATCH] cell: enable pause(0) in cpu_idle
This patch enables support for pause(0) power management state
for the Cell Broadband Processor, which is import for power efficient
operation. The pervasive infrastructure will in the future enable
us to introduce more functionality specific to the Cell's
pervasive unit.

From: Maximino Aguilar <maguilar@us.ibm.com>
Signed-off-by: Arnd Bergmann <arndb@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 15:44:32 +11:00
Andy Fleming 555d97ac87 [PATCH] powerpc: G4+ oprofile support
This patch adds oprofile support for the 7450 and all its multitudinous
derivatives.

* Added 7450 (and derivatives) support for oprofile
* Changed e500 cputable to have oprofile model and cpu_type fields
* Added support for classic 32-bit performance monitor interrupt
* Cleaned up common powerpc oprofile code to be as common as possible
* Cleaned up oprofile_impl.h to reflect 32 bit classic code
* Added 32-bit MMCRx bitfield definitions and SPR numbers

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 15:06:03 +11:00
Michael Ellerman cc53291521 [PATCH] powerpc: Add arch dependent basic infrastructure for Kdump.
Implementing the machine_crash_shutdown which will be called by
crash_kexec (called in case of a panic, sysrq etc.). Disable the
interrupts, shootdown cpus using debugger IPI and collect regs
for all CPUs.

elfcorehdr= specifies the location of elf core header stored by
the crashed kernel. This command line option will be passed by
the kexec-tools to capture kernel.

savemaxmem= specifies the actual memory size that the first kernel
has and this value will be used for dumping in the capture kernel.
This command line option will be passed by the kexec-tools to
capture kernel.

Signed-off-by: Haren Myneni <haren@us.ibm.com>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 14:52:28 +11:00
Benjamin Herrenschmidt a7f290dad3 [PATCH] powerpc: Merge vdso's and add vdso support to 32 bits kernel
This patch moves the vdso's to arch/powerpc, adds support for the 32
bits vdso to the 32 bits kernel, rename systemcfg (finally !), and adds
some new (still untested) routines to both vdso's: clock_gettime() with
support for CLOCK_REALTIME and CLOCK_MONOTONIC, clock_getres() (same
clocks) and get_tbfreq() for glibc to retreive the timebase frequency.

Tom,Steve: The implementation of get_tbfreq() I've done for 32 bits
returns a long long (r3, r4) not a long. This is such that if we ever
add support for >4Ghz timebases on ppc32, the userland interface won't
have to change.

I have tested gettimeofday() using some glibc patches in both ppc32 and
ppc64 kernels using 32 bits userland (I haven't had a chance to test a
64 bits userland yet, but the implementation didn't change and was
tested earlier). I haven't tested yet the new functions.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-11 22:25:39 +11:00
Paul Mackerras 799d6046d3 [PATCH] powerpc: merge code values for identifying platforms
This patch merges platform codes.  systemcfg->platform is no longer used,
systemcfg use in general is deprecated as much as possible (and renamed
_systemcfg before it gets completely moved elsewhere in a future patch),
_machine is now used on ppc64 along as ppc32.  Platform codes aren't gone
yet but we are getting a step closer. A bunch of asm code in head[_64].S
is also turned into C code.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10 13:37:51 +11:00
Matt Porter a31751e04e [PATCH] ppc32: fix perf_irq extern on e500
Fixes e500 build and cleans up traps.c by moving perf_irq extern to
pmc.h.

Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 07:55:52 -08:00
Anton Blanchard 570142ca37 [PATCH] ppc64: remove some direct xmon calls
Even though we can enable and disable xmon at runtime now, there are a
few places in the merge tree that call xmon and xmon_printf directly.

In the case below we call die() which will call xmon if it is enabled.

Also remove an unnecessary include of xmon.h in smp.c.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08 11:19:57 +11:00
Paul Mackerras 104dd65fef powerpc: clean up bug.h further
This simplifies the macros which are different between 32-bit and
64-bit.  It also fixes a couple of printks on the bug->line element,
which is now a long.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-02 15:19:47 +11:00
Arnd Bergmann f3f66f599d [PATCH] powerpc: Rename BPA to Cell
The official name for BPA is now CBEA (Cell Broadband
Engine Architecture). This patch renames all occurences
of the term BPA to 'Cell' for easier recognition.

Signed-off-by: Arnd Bergmann <arndb@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-01 21:02:44 +11:00
David Gibson 25c8a78b1e [PATCH] powerpc: Fix handling of fpscr on 64-bit
The recent merge of fpu.S broken the handling of fpscr for
ARCH=powerpc and CONFIG_PPC64=y.  FP registers could be corrupted,
leading to strange random application crashes.

The confusion arises, because the thread_struct has (and requires) a
64-bit area to save the fpscr, because we use load/store double
instructions to get it in to/out of the FPU.  However, only the low
32-bits are actually used, so we want to treat it as a 32-bit quantity
when manipulating its bits to avoid extra load/stores on 32-bit.  This
patch replaces the current definition with a structure of two 32-bit
quantities (pad and val), to clarify things as much as is possible.
The 'val' field is used when manipulating bits, the structure itself
is used when obtaining the address for loading/unloading the value
from the FPU.

While we're at it, consolidate the 4 (!) almost identical versions of
cvt_fd() and cvt_df() (arch/ppc/kernel/misc.S,
arch/ppc64/kernel/misc.S, arch/powerpc/kernel/misc_32.S,
arch/powerpc/kernel/misc_64.S) into a single version in fpu.S.  The
new version takes a pointer to thread_struct and applies the correct
offset itself, rather than a pointer to the fpscr field itself, again
to avoid confusion as to which is the correct field to use.

Finally, this patch makes ARCH=ppc64 also use the consolidated fpu.S
code, which it previously did not.

Built for G5 (ARCH=ppc64 and ARCH=powerpc), 32-bit powermac (ARCH=ppc
and ARCH=powerpc) and Walnut (ARCH=ppc, CONFIG_MATH_EMULATION=y).
Booted on G5 (ARCH=powerpc) and things which previously fell over no
longer do.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27 20:48:50 +10:00
David Gibson f7f6f4fea6 [PATCH] powerpc: Merge ppc64 pmc.[ch] with ppc32 perfmon.[ch]
This patches the ppc32 and ppc64 versions of the headers and .c files
with helper functions for manipulating the performance counting
hardware.  As a side effect, it removes use of the term "perfmon" from
ppc32, thus avoiding confusion with the unrelated performance counter
interface from HP Labs also called "perfmon".

Built, but not booted, for g5, pSeries, iSeries, and 32-bit Powermac
with both ARCH=powerpc and ARCH=ppc{,64} as appropriate.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20 16:22:24 +10:00
Paul Mackerras 8641778049 powerpc: Reduce the 32/64-bit differences in traps.c
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:37:57 +10:00
Paul Mackerras 8dad3f9257 powerpc: Merge traps.c a bit more
This reduces the differences between ppc32 and ppc64 in
arch/powerpc/kernel/traps.c a bit further.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-06 13:27:05 +10:00
Stephen Rothwell dc1c1ca3dc powerpc: merge idle_power4.S and trapc.s
Use idle_power4.S from ppc64 as we are not going to support
32 bit power4 in the merged tree.

Merge ppc64 traps.c into powerpc traps.c:
	use ppc64 versions of exception routine names
		(as they don't have StudlyCaps)
	make all the versions if die() have the same
		prototype

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-01 18:43:42 +10:00
Paul Mackerras 14cf11af6c powerpc: Merge enough to start building in arch/powerpc.
This creates the directory structure under arch/powerpc and a bunch
of Kconfig files.  It does a first-cut merge of arch/powerpc/mm,
arch/powerpc/lib and arch/powerpc/platforms/powermac.  This is enough
to build a 32-bit powermac kernel with ARCH=powerpc.

For now we are getting some unmerged files from arch/ppc/kernel and
arch/ppc/syslib, or arch/ppc64/kernel.  This makes some minor changes
to files in those directories and files outside arch/powerpc.

The boot directory is still not merged.  That's going to be interesting.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 16:04:21 +10:00