Commit Graph

10 Commits

Author SHA1 Message Date
Clemens Ladisch e96f38f732 ALSA: virtuoso: fix front panel routing for D1/DX/ST(X)
The "Front Panel" switch on the Xonar D1/DX actually switches only the
output direction, so mark it appropriately.

The front panel microphone is controlled by the FMIC2MIC bit of the
CM9780.  It was unconditionally enabled on the D1/DX and never set on
the ST(X); add a control for it.  Selecting the front panel microphone
as source does not actually disable the microphone jack, but this is
bug-compatible with the Windows driver, and users rely on it.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-12-06 14:48:08 +01:00
Clemens Ladisch f7e4bad74e ALSA: virtuoso: initialize unknown GPIO bits
Initialize the configuration of some unknown GPIO output bits (that
might not be used at all) to be the same as in the Windows driver, just
to be sure.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-12-06 14:47:50 +01:00
Clemens Ladisch b6ca8ab399 ALSA: oxygen: handle CD input configuration with a flag
There are more models without a CD input than with one, so handle this
explicitly with a device_config flag to avoid having to define a control
filter callback to filter it out.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-05 18:11:17 +02:00
Clemens Ladisch 6a45f78225 ALSA: virtuoso: fix Xonar D1/DX front panel microphone
Commit 65c3ac885c in 2.6.33 accidentally
left out the initialization of the AC97 codec FMIC2MIC bit, which broke
recording from the front panel microphone.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: <stable@kernel.org>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-05-12 10:28:36 +02:00
Clemens Ladisch 4852ad0247 sound: oxygen: add digital filter control
Add a control to select between sharp and slow roll-of filter responses
of the DACs.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-28 11:55:00 +02:00
Clemens Ladisch 76ffe1e3fb sound: oxygen: allow custom MCLK rates
Add a callback that allows model drivers to modify the default I2S MCLK
rate.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-28 11:54:45 +02:00
Clemens Ladisch 6f0de3ce06 sound: oxygen: cache codec registers
Keep a cache of codec registers to avoid unnecessary writes.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-28 11:54:29 +02:00
Clemens Ladisch dc0adf48da sound: oxygen: more hardware documentation
Add some comments describing the hardware pin routing.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-28 11:54:20 +02:00
Clemens Ladisch 3d8bb454c4 sound: oxygen: add stereo upmixing to center/LFE channels
Add the possibility to route a mix of the two channels of stereo data to
the center and LFE outputs.  This is implemented only for models where
the DACs support this, i.e., for the Xonar D1 and DX.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-28 11:54:11 +02:00
Clemens Ladisch 65c3ac885c sound: virtuoso: split virtuoso.c
The virtuoso.c file has become rather big.  This patch splits it up so
that only code for very similar card models is in one file.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-28 11:53:38 +02:00