Suppose you have a map array value that is something like this
struct foo {
unsigned iter;
int array[SOME_CONSTANT];
};
You can easily insert this into an array, but you cannot modify the contents of
foo->array[] after the fact. This is because we have no way to verify we won't
go off the end of the array at verification time. This patch provides a start
for this work. We accomplish this by keeping track of a minimum and maximum
value a register could be while we're checking the code. Then at the time we
try to do an access into a MAP_VALUE we verify that the maximum offset into that
region is a valid access into that memory region. So in practice, code such as
this
unsigned index = 0;
if (foo->iter >= SOME_CONSTANT)
foo->iter = index;
else
index = foo->iter++;
foo->array[index] = bar;
would be allowed, as we can verify that index will always be between 0 and
SOME_CONSTANT-1. If you wish to use signed values you'll have to have an extra
check to make sure the index isn't less than 0, or do something like index %=
SOME_CONSTANT.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
seccomp_phase1() does not exist anymore. Instead, update sample to use
__seccomp_filter(). While at it, set max locked memory to unlimited.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
These samples fail to compile as 'struct flow_keys' conflicts with
definition in net/flow_dissector.h. Fix the same by renaming the
structure used in the sample.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add couple of test cases for direct write and the negative size issue, and
also adjust the direct packet access test4 since it asserts that writes are
not possible, but since we've just added support for writes, we need to
invert the verdict to ACCEPT, of course. Summary: 133 PASSED, 0 FAILED.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
the test creates 3 namespaces with veth connected via bridge.
First two namespaces simulate two different hosts with the same
IPv4 and IPv6 addresses configured on the tunnel interface and they
communicate with outside world via standard tunnels.
Third namespace creates collect_md tunnel that is driven by BPF
program which selects different remote host (either first or
second namespace) based on tcp dest port number while tcp dst
ip is the same.
This scenario is rough approximation of load balancer use case.
The tests check both traditional tunnel configuration and collect_md mode.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
extend existing tests for vxlan, geneve, gre to include IPIP tunnel.
It tests both traditional tunnel configuration and
dynamic via bpf helpers.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
LLVM can generate code that tests for direct packet access via
skb->data/data_end in a way that currently gets rejected by the
verifier, example:
[...]
7: (61) r3 = *(u32 *)(r6 +80)
8: (61) r9 = *(u32 *)(r6 +76)
9: (bf) r2 = r9
10: (07) r2 += 54
11: (3d) if r3 >= r2 goto pc+12
R1=inv R2=pkt(id=0,off=54,r=0) R3=pkt_end R4=inv R6=ctx
R9=pkt(id=0,off=0,r=0) R10=fp
12: (18) r4 = 0xffffff7a
14: (05) goto pc+430
[...]
from 11 to 24: R1=inv R2=pkt(id=0,off=54,r=0) R3=pkt_end R4=inv
R6=ctx R9=pkt(id=0,off=0,r=0) R10=fp
24: (7b) *(u64 *)(r10 -40) = r1
25: (b7) r1 = 0
26: (63) *(u32 *)(r6 +56) = r1
27: (b7) r2 = 40
28: (71) r8 = *(u8 *)(r9 +20)
invalid access to packet, off=20 size=1, R9(id=0,off=0,r=0)
The reason why this gets rejected despite a proper test is that we
currently call find_good_pkt_pointers() only in case where we detect
tests like rX > pkt_end, where rX is of type pkt(id=Y,off=Z,r=0) and
derived, for example, from a register of type pkt(id=Y,off=0,r=0)
pointing to skb->data. find_good_pkt_pointers() then fills the range
in the current branch to pkt(id=Y,off=0,r=Z) on success.
For above case, we need to extend that to recognize pkt_end >= rX
pattern and mark the other branch that is taken on success with the
appropriate pkt(id=Y,off=0,r=Z) type via find_good_pkt_pointers().
Since eBPF operates on BPF_JGT (>) and BPF_JGE (>=), these are the
only two practical options to test for from what LLVM could have
generated, since there's no such thing as BPF_JLT (<) or BPF_JLE (<=)
that we would need to take into account as well.
After the fix:
[...]
7: (61) r3 = *(u32 *)(r6 +80)
8: (61) r9 = *(u32 *)(r6 +76)
9: (bf) r2 = r9
10: (07) r2 += 54
11: (3d) if r3 >= r2 goto pc+12
R1=inv R2=pkt(id=0,off=54,r=0) R3=pkt_end R4=inv R6=ctx
R9=pkt(id=0,off=0,r=0) R10=fp
12: (18) r4 = 0xffffff7a
14: (05) goto pc+430
[...]
from 11 to 24: R1=inv R2=pkt(id=0,off=54,r=54) R3=pkt_end R4=inv
R6=ctx R9=pkt(id=0,off=0,r=54) R10=fp
24: (7b) *(u64 *)(r10 -40) = r1
25: (b7) r1 = 0
26: (63) *(u32 *)(r6 +56) = r1
27: (b7) r2 = 40
28: (71) r8 = *(u8 *)(r9 +20)
29: (bf) r1 = r8
30: (25) if r8 > 0x3c goto pc+47
R1=inv56 R2=imm40 R3=pkt_end R4=inv R6=ctx R8=inv56
R9=pkt(id=0,off=0,r=54) R10=fp
31: (b7) r1 = 1
[...]
Verifier test cases are also added in this work, one that demonstrates
the mentioned example here and one that tries a bad packet access for
the current/fall-through branch (the one with types pkt(id=X,off=Y,r=0),
pkt(id=X,off=0,r=0)), then a case with good and bad accesses, and two
with both test variants (>, >=).
Fixes: 969bf05eb3 ("bpf: direct packet access")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
sample instruction pointer and frequency count in a BPF map
Signed-off-by: Brendan Gregg <bgregg@netflix.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The bpf program is called 50 times a second and does hashmap[kern&user_stackid]++
It's primary purpose to check that key bpf helpers like map lookup, update,
get_stackid, trace_printk and ctx access are all working.
It checks:
- PERF_COUNT_HW_CPU_CYCLES on all cpus
- PERF_COUNT_HW_CPU_CYCLES for current process and inherited perf_events to children
- PERF_COUNT_SW_CPU_CLOCK on all cpus
- PERF_COUNT_SW_CPU_CLOCK for current process
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The patch creates sample code exercising bpf_skb_{set,get}_tunnel_key,
and bpf_skb_{set,get}_tunnel_opt for GRE, VXLAN, and GENEVE. A native
tunnel device is created in a namespace to interact with a lwtunnel
device out of the namespace, with metadata enabled. The bpf_skb_set_*
program is attached to tc egress and bpf_skb_get_* is attached to egress
qdisc. A ping between two tunnels is used to verify correctness and
the result of bpf_skb_get_* printed by bpf_trace_printk.
Signed-off-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Minor overlapping changes for both merge conflicts.
Resolution work done by Stephen Rothwell was used
as a reference.
Signed-off-by: David S. Miller <davem@davemloft.net>
test various corner cases of the helper function access to the packet
via crafted XDP programs.
Signed-off-by: Aaron Yue <haoxuany@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
While hashing out BPF's current_task_under_cgroup helper bits, it came
to discussion that the skb_in_cgroup helper name was suboptimally chosen.
Tejun says:
So, I think in_cgroup should mean that the object is in that
particular cgroup while under_cgroup in the subhierarchy of that
cgroup. Let's rename the other subhierarchy test to under too. I
think that'd be a lot less confusing going forward.
[...]
It's more intuitive and gives us the room to implement the real
"in" test if ever necessary in the future.
Since this touches uapi bits, we need to change this as long as v4.8
is not yet officially released. Thus, change the helper enum and rename
related bits.
Fixes: 4a482f34af ("cgroup: bpf: Add bpf_skb_in_cgroup_proto")
Reference: http://patchwork.ozlabs.org/patch/658500/
Suggested-by: Sargun Dhillon <sargun@sargun.me>
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
This test has a BPF program which writes the last known pid to call the
sync syscall within a given cgroup to a map.
The user mode program creates its own mount namespace, and mounts the
cgroupsv2 hierarchy in there, as on all current test systems
(Ubuntu 16.04, Debian), the cgroupsv2 vfs is unmounted by default.
Once it does this, it proceeds to test.
The test checks for positive and negative condition. It ensures that
when it's part of a given cgroup, its pid is captured in the map,
and that when it leaves the cgroup, this doesn't happen.
It populate a cgroups arraymap prior to execution in userspace. This means
that the program must be run in the same cgroups namespace as the programs
that are being traced.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Tejun Heo <tj@kernel.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The commit 555c8a8623 ("bpf: avoid stack copy and use skb ctx for event output")
started using 20 of initially reserved upper 32-bits of 'flags' argument
in bpf_perf_event_output(). Adjust corresponding prototype in samples/bpf/bpf_helpers.h
Signed-off-by: Adam Barth <arb@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
increase test coverage to check previously missing 'update when full'
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This example shows using a kprobe to act as a dnat mechanism to divert
traffic for arbitrary endpoints. It rewrite the arguments to a syscall
while they're still in userspace, and before the syscall has a chance
to copy the argument into kernel space.
Although this is an example, it also acts as a test because the mapped
address is 255.255.255.255:555 -> real address, and that's not a legal
address to connect to. If the helper is broken, the example will fail
on the intermediate steps, as well as the final step to verify the
rewrite of userspace memory succeeded.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This allows user memory to be written to during the course of a kprobe.
It shouldn't be used to implement any kind of security mechanism
because of TOC-TOU attacks, but rather to debug, divert, and
manipulate execution of semi-cooperative processes.
Although it uses probe_kernel_write, we limit the address space
the probe can write into by checking the space with access_ok.
We do this as opposed to calling copy_to_user directly, in order
to avoid sleeping. In addition we ensure the threads's current fs
/ segment is USER_DS and the thread isn't exiting nor a kernel thread.
Given this feature is meant for experiments, and it has a risk of
crashing the system, and running programs, we print a warning on
when a proglet that attempts to use this helper is installed,
along with the pid and process name.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The naming choice of index is not terribly descriptive, and dropcnt is
in fact incorrect for xdp2. Pick better names for these: ipproto and
rxcnt.
Signed-off-by: Brenden Blanco <bblanco@plumgrid.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a sample that rewrites and forwards packets out on the same
interface. Observed single core forwarding performance of ~10Mpps.
Since the mlx4 driver under test recycles every single packet page, the
perf output shows almost exclusively just the ring management and bpf
program work. Slowdowns are likely occurring due to cache misses.
Signed-off-by: Brenden Blanco <bblanco@plumgrid.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
test_cgrp2_array_pin.c:
A userland program that creates a bpf_map (BPF_MAP_TYPE_GROUP_ARRAY),
pouplates/updates it with a cgroup2's backed fd and pins it to a
bpf-fs's file. The pinned file can be loaded by tc and then used
by the bpf prog later. This program can also update an existing pinned
array and it could be useful for debugging/testing purpose.
test_cgrp2_tc_kern.c:
A bpf prog which should be loaded by tc. It is to demonstrate
the usage of bpf_skb_in_cgroup.
test_cgrp2_tc.sh:
A script that glues the test_cgrp2_array_pin.c and
test_cgrp2_tc_kern.c together. The idea is like:
1. Load the test_cgrp2_tc_kern.o by tc
2. Use test_cgrp2_array_pin.c to populate a BPF_MAP_TYPE_CGROUP_ARRAY
with a cgroup fd
3. Do a 'ping -6 ff02::1%ve' to ensure the packet has been
dropped because of a match on the cgroup
Most of the lines in test_cgrp2_tc.sh is the boilerplate
to setup the cgroup/bpf-fs/net-devices/netns...etc. It is
not bulletproof on errors but should work well enough and
give enough debug info if things did not go well.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Tejun Heo <tj@kernel.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
add few tests for "pointer to packet" logic of the verifier
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
parse_simple.c - packet parser exapmle with single length check that
filters out udp packets for port 9
parse_varlen.c - variable length parser that understand multiple vlan headers,
ipip, ipip6 and ip options to filter out udp or tcp packets on port 9.
The packet is parsed layer by layer with multitple length checks.
parse_ldabs.c - classic style of packet parsing using LD_ABS instruction.
Same functionality as parse_simple.
simple = 24.1Mpps per core
varlen = 22.7Mpps
ldabs = 21.4Mpps
Parser with LD_ABS instructions is slower than full direct access parser
which does more packet accesses and checks.
These examples demonstrate the choice bpf program authors can make between
flexibility of the parser vs speed.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Conflicts:
net/ipv4/ip_gre.c
Minor conflicts between tunnel bug fixes in net and
ipv6 tunnel cleanups in net-next.
Signed-off-by: David S. Miller <davem@davemloft.net>
Users are likely to manually compile both LLVM 'llc' and 'clang'
tools. Thus, also allow redefining CLANG and verify command exist.
Makefile implementation wise, the target that verify the command have
been generalized.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is not intuitive that 'make' must be run from the top level
directory with argument "samples/bpf/" to compile these eBPF samples.
Introduce a kbuild make file trick that allow make to be run from the
"samples/bpf/" directory itself. It basically change to the top level
directory and call "make samples/bpf/" with the "/" slash after the
directory name.
Also add a clean target that only cleans this directory, by taking
advantage of the kbuild external module setting M=$PWD.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Getting started with using examples in samples/bpf/ is not
straightforward. There are several dependencies, and specific
versions of these dependencies.
Just compiling the example tool is also slightly obscure, e.g. one
need to call make like:
make samples/bpf/
Do notice the "/" slash after the directory name.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make compiling samples/bpf more user friendly, by detecting if LLVM
compiler tool 'llc' is available, and also detect if the 'bpf' target
is available in this version of LLVM.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is practical to be-able-to redefine the location of the LLVM
command 'llc', because not all distros have a LLVM version with bpf
target support. Thus, it is sometimes required to compile LLVM from
source, and sometimes it is not desired to overwrite the distros
default LLVM version.
This feature was removed with 128d1514be ("samples/bpf: Use llc in
PATH, rather than a hardcoded value").
Add this features back. Note that it is possible to redefine the LLC
on the make command like:
make samples/bpf/ LLC=~/git/llvm/build/bin/llc
Fixes: 128d1514be ("samples/bpf: Use llc in PATH, rather than a hardcoded value")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
llvm cannot always recognize memset as builtin function and optimize
it away, so just delete it. It was a leftover from testing
of bpf_perf_event_output() with large data structures.
Fixes: 39111695b1 ("samples: bpf: add bpf_perf_event_output example")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds test cases mostly around ARG_PTR_TO_RAW_STACK to check the
verifier behaviour.
[...]
#84 raw_stack: no skb_load_bytes OK
#85 raw_stack: skb_load_bytes, no init OK
#86 raw_stack: skb_load_bytes, init OK
#87 raw_stack: skb_load_bytes, spilled regs around bounds OK
#88 raw_stack: skb_load_bytes, spilled regs corruption OK
#89 raw_stack: skb_load_bytes, spilled regs corruption 2 OK
#90 raw_stack: skb_load_bytes, spilled regs + data OK
#91 raw_stack: skb_load_bytes, invalid access 1 OK
#92 raw_stack: skb_load_bytes, invalid access 2 OK
#93 raw_stack: skb_load_bytes, invalid access 3 OK
#94 raw_stack: skb_load_bytes, invalid access 4 OK
#95 raw_stack: skb_load_bytes, invalid access 5 OK
#96 raw_stack: skb_load_bytes, invalid access 6 OK
#97 raw_stack: skb_load_bytes, large access OK
Summary: 98 PASSED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove the zero initialization in the sample programs where appropriate.
Note that this is an optimization which is now possible, old programs
still doing the zero initialization are just fine as well. Also, make
sure we don't have padding issues when we don't memset() the entire
struct anymore.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
the first microbenchmark does
fd=open("/proc/self/comm");
for() {
write(fd, "test");
}
and on 4 cpus in parallel:
writes per sec
base (no tracepoints, no kprobes) 930k
with kprobe at __set_task_comm() 420k
with tracepoint at task:task_rename 730k
For kprobe + full bpf program manully fetches oldcomm, newcomm via bpf_probe_read.
For tracepint bpf program does nothing, since arguments are copied by tracepoint.
2nd microbenchmark does:
fd=open("/dev/urandom");
for() {
read(fd, buf);
}
and on 4 cpus in parallel:
reads per sec
base (no tracepoints, no kprobes) 300k
with kprobe at urandom_read() 279k
with tracepoint at random:urandom_read 290k
bpf progs attached to kprobe and tracepoint are noop.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
modify offwaketime to work with sched/sched_switch tracepoint
instead of kprobe into finish_task_switch
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Recognize "tracepoint/" section name prefix and attach the program
to that tracepoint.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the necessary definitions for building bpf samples on ppc.
Since ppc doesn't store function return address on the stack, modify how
PT_REGS_RET() and PT_REGS_FP() work.
Also, introduce PT_REGS_IP() to access the instruction pointer.
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
While at it, remove the generation of .s files and fix some typos in the
related comment.
Cc: Alexei Starovoitov <ast@fb.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Building BPF samples is failing with the below error:
samples/bpf/map_perf_test_user.c: In function ‘main’:
samples/bpf/map_perf_test_user.c:134:9: error: variable ‘r’ has
initializer but incomplete type
struct rlimit r = {RLIM_INFINITY, RLIM_INFINITY};
^
samples/bpf/map_perf_test_user.c:134:21: error: ‘RLIM_INFINITY’
undeclared (first use in this function)
struct rlimit r = {RLIM_INFINITY, RLIM_INFINITY};
^
samples/bpf/map_perf_test_user.c:134:21: note: each undeclared
identifier is reported only once for each function it appears in
samples/bpf/map_perf_test_user.c:134:9: warning: excess elements in
struct initializer [enabled by default]
struct rlimit r = {RLIM_INFINITY, RLIM_INFINITY};
^
samples/bpf/map_perf_test_user.c:134:9: warning: (near initialization
for ‘r’) [enabled by default]
samples/bpf/map_perf_test_user.c:134:9: warning: excess elements in
struct initializer [enabled by default]
samples/bpf/map_perf_test_user.c:134:9: warning: (near initialization
for ‘r’) [enabled by default]
samples/bpf/map_perf_test_user.c:134:16: error: storage size of ‘r’
isn’t known
struct rlimit r = {RLIM_INFINITY, RLIM_INFINITY};
^
samples/bpf/map_perf_test_user.c:139:2: warning: implicit declaration of
function ‘setrlimit’ [-Wimplicit-function-declaration]
setrlimit(RLIMIT_MEMLOCK, &r);
^
samples/bpf/map_perf_test_user.c:139:12: error: ‘RLIMIT_MEMLOCK’
undeclared (first use in this function)
setrlimit(RLIMIT_MEMLOCK, &r);
^
samples/bpf/map_perf_test_user.c:134:16: warning: unused variable ‘r’
[-Wunused-variable]
struct rlimit r = {RLIM_INFINITY, RLIM_INFINITY};
^
make[2]: *** [samples/bpf/map_perf_test_user.o] Error 1
Fix this by including the necessary header file.
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
performance tests for hash map and per-cpu hash map
with and without pre-allocation
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
increase stress by also calling bpf_get_stackid() from
various *spin* functions
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
this test calls bpf programs from different contexts:
from inside of slub, from rcu, from pretty much everywhere,
since it kprobes all spin_lock functions.
It stresses the bpf hash and percpu map pre-allocation,
deallocation logic and call_rcu mechanisms.
User space part adding more stress by walking and deleting map elements.
Note that due to nature bpf_load.c the earlier kprobe+bpf programs are
already active while loader loads new programs, creates new kprobes and
attaches them.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
extend test coveraged to include pre-allocated and run-time alloc maps
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
note old loader is compatible with new kernel.
map_flags are optional
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
move ksym search from offwaketime into library to be reused
in other tests
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
map creation is typically the first one to fail when rlimits are
too low, not enough memory, etc
Make this failure scenario more verbose
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is simplified version of Brendan Gregg's offwaketime:
This program shows kernel stack traces and task names that were blocked and
"off-CPU", along with the stack traces and task names for the threads that woke
them, and the total elapsed time from when they blocked to when they were woken
up. The combined stacks, task names, and total time is summarized in kernel
context for efficiency.
Example:
$ sudo ./offwaketime | flamegraph.pl > demo.svg
Open demo.svg in the browser as FlameGraph visualization.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Josef Bacik