Commit Graph

2879 Commits

Author SHA1 Message Date
Darrick J. Wong 28b2be203e block: require write_same and discard requests align to logical block size
Make sure that the offset and length arguments that we're using to
construct WRITE SAME and DISCARD requests are actually aligned to the
logical block size.  Failure to do this causes other errors in other parts
of the block layer or the SCSI layer because disks don't support partial
logical block writes.

Link: http://lkml.kernel.org/r/147518379026.22791.4437508871355153928.stgit@birch.djwong.org
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Mike Snitzer <snitzer@redhat.com> # tweaked header
Cc: Brian Foster <bfoster@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-11 15:06:30 -07:00
Darrick J. Wong 22dd6d3566 block: invalidate the page cache when issuing BLKZEROOUT
Patch series "fallocate for block devices", v11.

This is a patchset to fix page cache coherency with BLKZEROOUT and
implement fallocate for block devices.

The first patch is a fix to the existing BLKZEROOUT ioctl to invalidate
the page cache if the zeroing command to the underlying device succeeds.
Without this patch we still have the pagecache coherence bug that's been
in the kernel forever.

The second patch changes the internal block device functions to reject
attempts to discard or zeroout that are not aligned to the logical block
size.  Previously, we only checked that the start/len parameters were
512-byte aligned, which caused kernel BUG_ONs for unaligned IOs to 4k-LBA
devices.

The third patch creates an fallocate handler for block devices, wires up
the FALLOC_FL_PUNCH_HOLE flag to zeroing-discard, and connects
FALLOC_FL_ZERO_RANGE to write-same so that we can have a consistent
fallocate interface between files and block devices.  It also allows the
combination of PUNCH_HOLE and NO_HIDE_STALE to invoke non-zeroing discard.

Test cases for the new block device fallocate are now in xfstests as
generic/349-351.

This patch (of 3):

Invalidate the page cache (as a regular O_DIRECT write would do) to avoid
returning stale cache contents at a later time.

Link: http://lkml.kernel.org/r/147518378313.22791.16649519283678515021.stgit@birch.djwong.org
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Brian Foster <bfoster@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-11 15:06:30 -07:00
Linus Torvalds 24532f7681 Merge branch 'for-4.9/block-smp' of git://git.kernel.dk/linux-block
Pull blk-mq CPU hotplug update from Jens Axboe:
 "This is the conversion of blk-mq to the new hotplug state machine"

* 'for-4.9/block-smp' of git://git.kernel.dk/linux-block:
  blk-mq: fixup "Convert to new hotplug state machine"
  blk-mq: Convert to new hotplug state machine
  blk-mq/cpu-notif: Convert to new hotplug state machine
2016-10-09 17:32:20 -07:00
Linus Torvalds 12e3d3cdd9 Merge branch 'for-4.9/block-irq' of git://git.kernel.dk/linux-block
Pull blk-mq irq/cpu mapping updates from Jens Axboe:
 "This is the block-irq topic branch for 4.9-rc. It's mostly from
  Christoph, and it allows drivers to specify their own mappings, and
  more importantly, to share the blk-mq mappings with the IRQ affinity
  mappings. It's a good step towards making this work better out of the
  box"

* 'for-4.9/block-irq' of git://git.kernel.dk/linux-block:
  blk_mq: linux/blk-mq.h does not include all the headers it depends on
  blk-mq: kill unused blk_mq_create_mq_map()
  blk-mq: get rid of the cpumask in struct blk_mq_tags
  nvme: remove the post_scan callout
  nvme: switch to use pci_alloc_irq_vectors
  blk-mq: provide a default queue mapping for PCI device
  blk-mq: allow the driver to pass in a queue mapping
  blk-mq: remove ->map_queue
  blk-mq: only allocate a single mq_map per tag_set
  blk-mq: don't redistribute hardware queues on a CPU hotplug event
2016-10-09 17:29:33 -07:00
Linus Torvalds 513a4befae Merge branch 'for-4.9/block' of git://git.kernel.dk/linux-block
Pull block layer updates from Jens Axboe:
 "This is the main pull request for block layer changes in 4.9.

  As mentioned at the last merge window, I've changed things up and now
  do just one branch for core block layer changes, and driver changes.
  This avoids dependencies between the two branches. Outside of this
  main pull request, there are two topical branches coming as well.

  This pull request contains:

   - A set of fixes, and a conversion to blk-mq, of nbd. From Josef.

   - Set of fixes and updates for lightnvm from Matias, Simon, and Arnd.
     Followup dependency fix from Geert.

   - General fixes from Bart, Baoyou, Guoqing, and Linus W.

   - CFQ async write starvation fix from Glauber.

   - Add supprot for delayed kick of the requeue list, from Mike.

   - Pull out the scalable bitmap code from blk-mq-tag.c and make it
     generally available under the name of sbitmap. Only blk-mq-tag uses
     it for now, but the blk-mq scheduling bits will use it as well.
     From Omar.

   - bdev thaw error progagation from Pierre.

   - Improve the blk polling statistics, and allow the user to clear
     them. From Stephen.

   - Set of minor cleanups from Christoph in block/blk-mq.

   - Set of cleanups and optimizations from me for block/blk-mq.

   - Various nvme/nvmet/nvmeof fixes from the various folks"

* 'for-4.9/block' of git://git.kernel.dk/linux-block: (54 commits)
  fs/block_dev.c: return the right error in thaw_bdev()
  nvme: Pass pointers, not dma addresses, to nvme_get/set_features()
  nvme/scsi: Remove power management support
  nvmet: Make dsm number of ranges zero based
  nvmet: Use direct IO for writes
  admin-cmd: Added smart-log command support.
  nvme-fabrics: Add host_traddr options field to host infrastructure
  nvme-fabrics: revise host transport option descriptions
  nvme-fabrics: rework nvmf_get_address() for variable options
  nbd: use BLK_MQ_F_BLOCKING
  blkcg: Annotate blkg_hint correctly
  cfq: fix starvation of asynchronous writes
  blk-mq: add flag for drivers wanting blocking ->queue_rq()
  blk-mq: remove non-blocking pass in blk_mq_map_request
  blk-mq: get rid of manual run of queue with __blk_mq_run_hw_queue()
  block: export bio_free_pages to other modules
  lightnvm: propagate device_add() error code
  lightnvm: expose device geometry through sysfs
  lightnvm: control life of nvm_dev in driver
  blk-mq: register device instead of disk
  ...
2016-10-07 14:42:05 -07:00
Linus Torvalds 597f03f9d1 Merge branch 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull CPU hotplug updates from Thomas Gleixner:
 "Yet another batch of cpu hotplug core updates and conversions:

   - Provide core infrastructure for multi instance drivers so the
     drivers do not have to keep custom lists.

   - Convert custom lists to the new infrastructure. The block-mq custom
     list conversion comes through the block tree and makes the diffstat
     tip over to more lines removed than added.

   - Handle unbalanced hotplug enable/disable calls more gracefully.

   - Remove the obsolete CPU_STARTING/DYING notifier support.

   - Convert another batch of notifier users.

   The relayfs changes which conflicted with the conversion have been
   shipped to me by Andrew.

   The remaining lot is targeted for 4.10 so that we finally can remove
   the rest of the notifiers"

* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
  cpufreq: Fix up conversion to hotplug state machine
  blk/mq: Reserve hotplug states for block multiqueue
  x86/apic/uv: Convert to hotplug state machine
  s390/mm/pfault: Convert to hotplug state machine
  mips/loongson/smp: Convert to hotplug state machine
  mips/octeon/smp: Convert to hotplug state machine
  fault-injection/cpu: Convert to hotplug state machine
  padata: Convert to hotplug state machine
  cpufreq: Convert to hotplug state machine
  ACPI/processor: Convert to hotplug state machine
  virtio scsi: Convert to hotplug state machine
  oprofile/timer: Convert to hotplug state machine
  block/softirq: Convert to hotplug state machine
  lib/irq_poll: Convert to hotplug state machine
  x86/microcode: Convert to hotplug state machine
  sh/SH-X3 SMP: Convert to hotplug state machine
  ia64/mca: Convert to hotplug state machine
  ARM/OMAP/wakeupgen: Convert to hotplug state machine
  ARM/shmobile: Convert to hotplug state machine
  arm64/FP/SIMD: Convert to hotplug state machine
  ...
2016-10-03 19:43:08 -07:00
Christoph Hellwig c8712c6a67 blk-mq: skip unmapped queues in blk_mq_alloc_request_hctx
This provides the caller a feedback that a given hctx is not mapped and thus
no command can be sent on it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-23 10:25:48 -06:00
Glauber Costa 3932a86b4b cfq: fix starvation of asynchronous writes
While debugging timeouts happening in my application workload (ScyllaDB), I have
observed calls to open() taking a long time, ranging everywhere from 2 seconds -
the first ones that are enough to time out my application - to more than 30
seconds.

The problem seems to happen because XFS may block on pending metadata updates
under certain circumnstances, and that's confirmed with the following backtrace
taken by the offcputime tool (iovisor/bcc):

    ffffffffb90c57b1 finish_task_switch
    ffffffffb97dffb5 schedule
    ffffffffb97e310c schedule_timeout
    ffffffffb97e1f12 __down
    ffffffffb90ea821 down
    ffffffffc046a9dc xfs_buf_lock
    ffffffffc046abfb _xfs_buf_find
    ffffffffc046ae4a xfs_buf_get_map
    ffffffffc046babd xfs_buf_read_map
    ffffffffc0499931 xfs_trans_read_buf_map
    ffffffffc044a561 xfs_da_read_buf
    ffffffffc0451390 xfs_dir3_leaf_read.constprop.16
    ffffffffc0452b90 xfs_dir2_leaf_lookup_int
    ffffffffc0452e0f xfs_dir2_leaf_lookup
    ffffffffc044d9d3 xfs_dir_lookup
    ffffffffc047d1d9 xfs_lookup
    ffffffffc0479e53 xfs_vn_lookup
    ffffffffb925347a path_openat
    ffffffffb9254a71 do_filp_open
    ffffffffb9242a94 do_sys_open
    ffffffffb9242b9e sys_open
    ffffffffb97e42b2 entry_SYSCALL_64_fastpath
    00007fb0698162ed [unknown]

Inspecting my run with blktrace, I can see that the xfsaild kthread exhibit very
high "Dispatch wait" times, on the dozens of seconds range and consistent with
the open() times I have saw in that run.

Still from the blktrace output, we can after searching a bit, identify the
request that wasn't dispatched:

  8,0   11      152    81.092472813   804  A  WM 141698288 + 8 <- (8,1) 141696240
  8,0   11      153    81.092472889   804  Q  WM 141698288 + 8 [xfsaild/sda1]
  8,0   11      154    81.092473207   804  G  WM 141698288 + 8 [xfsaild/sda1]
  8,0   11      206    81.092496118   804  I  WM 141698288 + 8 (   22911) [xfsaild/sda1]
  <==== 'I' means Inserted (into the IO scheduler) ===================================>
  8,0    0   289372    96.718761435     0  D  WM 141698288 + 8 (15626265317) [swapper/0]
  <==== Only 15s later the CFQ scheduler dispatches the request ======================>

As we can see above, in this particular example CFQ took 15 seconds to dispatch
this request. Going back to the full trace, we can see that the xfsaild queue
had plenty of opportunity to run, and it was selected as the active queue many
times. It would just always be preempted by something else (example):

  8,0    1        0    81.117912979     0  m   N cfq1618SN / insert_request
  8,0    1        0    81.117913419     0  m   N cfq1618SN / add_to_rr
  8,0    1        0    81.117914044     0  m   N cfq1618SN / preempt
  8,0    1        0    81.117914398     0  m   N cfq767A  / slice expired t=1
  8,0    1        0    81.117914755     0  m   N cfq767A  / resid=40
  8,0    1        0    81.117915340     0  m   N / served: vt=1948520448 min_vt=1948520448
  8,0    1        0    81.117915858     0  m   N cfq767A  / sl_used=1 disp=0 charge=0 iops=1 sect=0

where cfq767 is the xfsaild queue and cfq1618 corresponds to one of the ScyllaDB
IO dispatchers.

The requests preempting the xfsaild queue are synchronous requests. That's a
characteristic of ScyllaDB workloads, as we only ever issue O_DIRECT requests.
While it can be argued that preempting ASYNC requests in favor of SYNC is part
of the CFQ logic, I don't believe that doing so for 15+ seconds is anyone's
goal.

Moreover, unless I am misunderstanding something, that breaks the expectation
set by the "fifo_expire_async" tunable, which in my system is set to the
default.

Looking at the code, it seems to me that the issue is that after we make
an async queue active, there is no guarantee that it will execute any request.

When the queue itself tests if it cfq_may_dispatch() it can bail if it sees SYNC
requests in flight. An incoming request from another queue can also preempt it
in such situation before we have the chance to execute anything (as seen in the
trace above).

This patch sets the must_dispatch flag if we notice that we have requests
that are already fifo_expired. This flag is always cleared after
cfq_dispatch_request() returns from cfq_dispatch_requests(), so it won't pin
the queue for subsequent requests (unless they are themselves expired)

Care is taken during preempt to still allow rt requests to preempt us
regardless.

Testing my workload with this patch applied produces much better results.
From the application side I see no timeouts, and the open() latency histogram
generated by systemtap looks much better, with the worst outlier at 131ms:

Latency histogram of xfs_buf_lock acquisition (microseconds):
 value |-------------------------------------------------- count
     0 |                                                     11
     1 |@@@@                                                161
     2 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@  1966
     4 |@                                                    54
     8 |                                                     36
    16 |                                                      7
    32 |                                                      0
    64 |                                                      0
       ~
  1024 |                                                      0
  2048 |                                                      0
  4096 |                                                      1
  8192 |                                                      1
 16384 |                                                      2
 32768 |                                                      0
 65536 |                                                      0
131072 |                                                      1
262144 |                                                      0
524288 |                                                      0

Signed-off-by: Glauber Costa <glauber@scylladb.com>
CC: Jens Axboe <axboe@kernel.dk>
CC: linux-block@vger.kernel.org
CC: linux-kernel@vger.kernel.org

Signed-off-by: Glauber Costa <glauber@scylladb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-23 10:01:24 -06:00
Sebastian Andrzej Siewior 97a32864e6 blk-mq: fixup "Convert to new hotplug state machine"
The "blk_mq_queue_reinit_dead()" just cleared the cpumask instead doing
a copy. Since we might never had an online callback we could end up with
a ZERO mask which in turn leads to crash as test robot demonstarted.

Fixes: 65d5291eee ("blk-mq: Convert to new hotplug state machine")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-23 09:49:32 -06:00
Jens Axboe 1b792f2f92 blk-mq: add flag for drivers wanting blocking ->queue_rq()
If a driver sets BLK_MQ_F_BLOCKING, it is allowed to block in its
->queue_rq() handler. For that case, blk-mq ensures that we always
calls it from a safe context.

Signed-off-by: Jens Axboe <axboe@fb.com>
Tested-by: Josef Bacik <jbacik@fb.com>
2016-09-22 14:28:38 -06:00
Christoph Hellwig 63581af3f3 blk-mq: remove non-blocking pass in blk_mq_map_request
bt_get already does a non-blocking pass as well as running the queue
when scheduling internally, no need to duplicate it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-22 14:27:39 -06:00
Jens Axboe 841bac2c87 blk-mq: get rid of manual run of queue with __blk_mq_run_hw_queue()
Two cases:

1) blk_mq_alloc_request() needlessly re-runs the queue, after
   calling into the tag allocation without NOWAIT set. We don't
   need to do that.

2) blk_mq_map_request() should just use blk_mq_run_hw_queue() with
   the async flag set to false.

Signed-off-by: Jens Axboe <axboe@fb.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-09-22 09:39:53 -06:00
Sebastian Andrzej Siewior 65d5291eee blk-mq: Convert to new hotplug state machine
Install the callbacks via the state machine so we can phase out the cpu
hotplug notifiers mess.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-block@vger.kernel.org
Cc: rt@linutronix.de
Cc: Christoph Hellwing <hch@lst.de>
Link: http://lkml.kernel.org/r/20160919212601.180033814@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-22 08:05:19 -06:00
Thomas Gleixner 9467f85960 blk-mq/cpu-notif: Convert to new hotplug state machine
Replace the block-mq notifier list management with the multi instance
facility in the cpu hotplug state machine.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-block@vger.kernel.org
Cc: rt@linutronix.de
Cc: Christoph Hellwing <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-22 08:05:17 -06:00
Guoqing Jiang 491221f88d block: export bio_free_pages to other modules
bio_free_pages is introduced in commit 1dfa0f68c0
("block: add a helper to free bio bounce buffer pages"),
we can reuse the func in other modules after it was
imported.

Cc: Christoph Hellwig <hch@infradead.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Shaohua Li <shli@fb.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Acked-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-22 07:48:03 -06:00
Matias Bjørling b21d5b3017 blk-mq: register device instead of disk
Enable devices without a gendisk instance to register itself with blk-mq
and expose the associated multi-queue sysfs entries.

Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-21 07:56:16 -06:00
Vivek Goyal 164c80ed84 blk-throttle: Extend slice if throttle group is not empty
Right now, if slice is expired, we start a new slice. If a bio is
queued, we keep on extending slice by throtle_slice interval (100ms).

This worked well as long as pending timer function got executed with-in
few milli seconds of scheduled time. But looks like with recent changes
in timer subsystem, slack can be much longer depending on the expiry time
of the scheduled timer.

commit 500462a9de ("timers: Switch to a non-cascading wheel")

This means, by the time timer function gets executed, it is possible the
delay from scheduled time is more than 100ms. That means current code
will conclude that existing slice has expired and a new one needs to
be started. New slice will be 100ms by default and that will not be
sufficient to meet rate requirement of group given the bio size and
bio will not be dispatched and we will start a new timer function to
wait. And when that timer expires, same process will repeat and we
will wait again and this can easily be an infinite loop.

Solve this issue by starting a new slice only if throttle gropup is
empty. If it is not empty, that means there should be an active slice
going on. Ideally it should not be expired but given the slack, it is
possible that it has expired.

Reported-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-19 15:12:41 -06:00
Sebastian Andrzej Siewior 9a659f43df block/softirq: Convert to hotplug state machine
Install the callbacks via the state machine.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160906170457.32393-9-bigeasy@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-19 21:44:28 +02:00
Stephen Rothwell 8ec2ef2b66 blk_mq: linux/blk-mq.h does not include all the headers it depends on
and building block/blk-mq-pci.o should depend on CONFIG_BLOCK

Fixes: 973c4e372c ("blk-mq: provide a default queue mapping for PCI device")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-19 08:21:51 -06:00
Omar Sandoval 98d95416db sbitmap: randomize initial alloc_hint values
In order to get good cache behavior from a sbitmap, we want each CPU to
stick to its own cacheline(s) as much as possible. This might happen
naturally as the bitmap gets filled up and the alloc_hint values spread
out, but we really want this behavior from the start. blk-mq apparently
intended to do this, but the code to do this was never wired up. Get rid
of the dead code and make it part of the sbitmap library.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-17 08:39:14 -06:00
Omar Sandoval f4a644db86 sbitmap: push alloc policy into sbitmap_queue
Again, there's no point in passing this in every time. Make it part of
struct sbitmap_queue and clean up the API.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-17 08:39:12 -06:00
Omar Sandoval 40aabb6746 sbitmap: push per-cpu last_tag into sbitmap_queue
Allocating your own per-cpu allocation hint separately makes for an
awkward API. Instead, allocate the per-cpu hint as part of the struct
sbitmap_queue. There's no point for a struct sbitmap_queue without the
cache, but you can still use a bare struct sbitmap.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-17 08:39:10 -06:00
Omar Sandoval 88459642cb blk-mq: abstract tag allocation out into sbitmap library
This is a generally useful data structure, so make it available to
anyone else who might want to use it. It's also a nice cleanup
separating the allocation logic from the rest of the tag handling logic.

The code is behind a new Kconfig option, CONFIG_SBITMAP, which is only
selected by CONFIG_BLOCK for now.

This should be a complete noop functionality-wise.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-17 08:38:44 -06:00
Jens Axboe 703fd1c0f1 blk-mq: account higher order dispatch
We currently account a '0' dispatch, and anything above that still falls
below the range set by BLK_MQ_MAX_DISPATCH_ORDER. If we dispatch more,
we don't account it.

Change the last bucket to be inclusive of anything above the range we
track, and have the sysfs file reflect that by including a '+' in the
output:

$ cat /sys/block/nvme0n1/mq/0/dispatched
        0	1006
        1	20229
        2	1
        4	0
        8	0
       16	0
       32+	0

Signed-off-by: Jens Axboe <axboe@fb.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
2016-09-16 14:03:04 -06:00
Jens Axboe 9151bcb4fb blk-mq: kill unused blk_mq_create_mq_map()
Fixes 1b157939f9 ("blk-mq: get rid of the cpumask in struct blk_mq_tags")
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-15 08:45:45 -06:00
Christoph Hellwig 1b157939f9 blk-mq: get rid of the cpumask in struct blk_mq_tags
Unused now that NVMe sets up irq affinity before calling into blk-mq.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-15 08:42:03 -06:00
Christoph Hellwig 973c4e372c blk-mq: provide a default queue mapping for PCI device
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-15 08:42:03 -06:00
Christoph Hellwig da695ba236 blk-mq: allow the driver to pass in a queue mapping
This allows drivers specify their own queue mapping by overriding the
setup-time function that builds the mq_map.  This can be used for
example to build the map based on the MSI-X vector mapping provided
by the core interrupt layer for PCI devices.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-15 08:42:03 -06:00
Christoph Hellwig 7d7e0f90b7 blk-mq: remove ->map_queue
All drivers use the default, so provide an inline version of it.  If we
ever need other queue mapping we can add an optional method back,
although supporting will also require major changes to the queue setup
code.

This provides better code generation, and better debugability as well.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-15 08:42:03 -06:00
Christoph Hellwig bdd17e75cd blk-mq: only allocate a single mq_map per tag_set
The mapping is identical for all queues in a tag_set, so stop wasting
memory for building multiple.  Note that for now I've kept the mq_map
pointer in the request_queue, but we'll need to investigate if we can
remove it without suffering too much from the additional pointer chasing.
The same would apply to the mq_ops pointer as well.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-15 08:42:03 -06:00
Christoph Hellwig 4e68a01142 blk-mq: don't redistribute hardware queues on a CPU hotplug event
Currently blk-mq will totally remap hardware context when a CPU hotplug
even happened, which causes major havoc for drivers, as they are never
told about this remapping.  E.g. any carefully sorted out CPU affinity
will just be completely messed up.

The rebuild also doesn't really help for the common case of cpu
hotplug, which is soft onlining / offlining of cpus - in this case we
should just leave the queue and irq mapping as is.  If it actually
worked it would have helped in the case of physical cpu hotplug,
although for that we'd need a way to actually notify the driver.
Note that drivers may already be able to accommodate such a topology
change on their own, e.g. using the reset_controller sysfs file in NVMe
will cause the driver to get things right for this case.

With the rebuild removed we will simplify retain the queue mapping for
a soft offlined CPU that will work when it comes back online, and will
map any newly onlined CPU to queue 0 until the driver initiates
a rebuild of the queue map.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-15 08:42:03 -06:00
Mike Snitzer 2849450ad3 blk-mq: introduce blk_mq_delay_kick_requeue_list()
blk_mq_delay_kick_requeue_list() provides the ability to kick the
q->requeue_list after a specified time.  To do this the request_queue's
'requeue_work' member was changed to a delayed_work.

blk_mq_delay_kick_requeue_list() allows DM to defer processing requeued
requests while it doesn't make sense to immediately requeue them
(e.g. when all paths in a DM multipath have failed).

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-14 11:48:34 -06:00
Linus Walleij a441b0d093 block: remove remnant refs to hardsect
commit e1defc4ff0
"block: Do away with the notion of hardsect_size"
removed the notion of "hardware sector size" from
the kernel in favor of logical block size, but
references remain in comments and documentation.

Update the remaining sites mentioning hardsect.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-14 08:44:57 -06:00
Stephen Bates d21ea4bc0f block: enable zeroing of io_poll statistics
Allow the io_poll statistics to be zeroed to make for easier logging
of polling event.

Signed-off-by: Stephen Bates <sbates@raithlin.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-14 08:41:23 -06:00
Stephen Bates 6e219353af block: add poll_considered statistic
In order to help determine the effectiveness of polling in a running
system it is usful to determine the ratio of how often the poll
function is called vs how often the completion is checked. For this
reason we add a poll_considered variable and add it to the sysfs entry
for io_poll.

Signed-off-by: Stephen Bates <sbates@raithlin.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-14 08:41:21 -06:00
Jens Axboe 88c7b2b751 blk-mq: prefetch request in blk_mq_tag_to_rq()
When drivers or the core calls this function, they usually
dereference the request shortly there after. Prefetch the first
cache line.

Profiling IO workloads shows that this is the most common cache
miss on the block side of things.

Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-29 08:13:21 -06:00
Jens Axboe 27489a3c82 blk-mq: turn hctx->run_work into a regular work struct
We don't need the larger delayed work struct, since we always run it
immediately.

Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-29 08:13:21 -06:00
Jens Axboe ee63cfa7fc block: add kblockd_schedule_work_on()
Add a helper to schedule a regular struct work on a particular CPU.

Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-29 08:13:21 -06:00
Jens Axboe 0e87e58bf6 blk-mq: improve warning for running a queue on the wrong CPU
__blk_mq_run_hw_queue() currently warns if we are running the queue on a
CPU that isn't set in its mask. However, this can happen if a CPU is
being offlined, and the workqueue handling will place the work on CPU0
instead. Improve the warning so that it only triggers if the batch cpu
in the hardware queue is currently online.  If it triggers for that
case, then it's indicative of a flow problem in blk-mq, so we want to
retain it for that case.

Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-24 15:38:01 -06:00
Jens Axboe e57690fe00 blk-mq: don't overwrite rq->mq_ctx
We do this in a few places, if the CPU is offline. This isn't allowed,
though, since on multi queue hardware, we can't just move a request
from one software queue to another, if they map to different hardware
queues. The request and tag isn't valid on another hardware queue.

This can happen if plugging races with CPU offlining. But it does
no harm, since it can only happen in the window where we are
currently busy freezing the queue and flushing IO, in preparation
for redoing the software <-> hardware queue mappings.

Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-24 15:34:35 -06:00
Ming Lei 4d70dca4ea block: make sure a big bio is split into at most 256 bvecs
After arbitrary bio size was introduced, the incoming bio may
be very big. We have to split the bio into small bios so that
each holds at most BIO_MAX_PAGES bvecs for safety reason, such
as bio_clone().

This patch fixes the following kernel crash:

> [  172.660142] BUG: unable to handle kernel NULL pointer dereference at 0000000000000028
> [  172.660229] IP: [<ffffffff811e53b4>] bio_trim+0xf/0x2a
> [  172.660289] PGD 7faf3e067 PUD 7f9279067 PMD 0
> [  172.660399] Oops: 0000 [#1] SMP
> [...]
> [  172.664780] Call Trace:
> [  172.664813]  [<ffffffffa007f3be>] ? raid1_make_request+0x2e8/0xad7 [raid1]
> [  172.664846]  [<ffffffff811f07da>] ? blk_queue_split+0x377/0x3d4
> [  172.664880]  [<ffffffffa005fb5f>] ? md_make_request+0xf6/0x1e9 [md_mod]
> [  172.664912]  [<ffffffff811eb860>] ? generic_make_request+0xb5/0x155
> [  172.664947]  [<ffffffffa0445c89>] ? prio_io+0x85/0x95 [bcache]
> [  172.664981]  [<ffffffffa0448252>] ? register_cache_set+0x355/0x8d0 [bcache]
> [  172.665016]  [<ffffffffa04497d3>] ? register_bcache+0x1006/0x1174 [bcache]

The issue can be reproduced by the following steps:
	- create one raid1 over two virtio-blk
	- build bcache device over the above raid1 and another cache device
	and bucket size is set as 2Mbytes
	- set cache mode as writeback
	- run random write over ext4 on the bcache device

Fixes: 54efd50(block: make generic_make_request handle arbitrarily sized bios)
Reported-by: Sebastian Roesner <sroesner-kernelorg@roesner-online.de>
Reported-by: Eric Wheeler <bcache@lists.ewheeler.net>
Cc: stable@vger.kernel.org (4.3+)
Cc: Shaohua Li <shli@fb.com>
Acked-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-24 08:17:24 -06:00
Bart Van Assche 1b85608681 block: Fix race triggered by blk_set_queue_dying()
blk_set_queue_dying() can be called while another thread is
submitting I/O or changing queue flags, e.g. through dm_stop_queue().
Hence protect the QUEUE_FLAG_DYING flag change with locking.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-16 19:36:14 -06:00
Adrian Hunter 7afafc8a44 block: Fix secure erase
Commit 288dab8a35 ("block: add a separate operation type for secure
erase") split REQ_OP_SECURE_ERASE from REQ_OP_DISCARD without considering
all the places REQ_OP_DISCARD was being used to mean either. Fix those.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: 288dab8a35 ("block: add a separate operation type for secure erase")
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-16 09:16:51 -06:00
Jens Axboe 1eff9d322a block: rename bio bi_rw to bi_opf
Since commit 63a4cc2486, bio->bi_rw contains flags in the lower
portion and the op code in the higher portions. This means that
old code that relies on manually setting bi_rw is most likely
going to be broken. Instead of letting that brokeness linger,
rename the member, to force old and out-of-tree code to break
at compile time instead of at runtime.

No intended functional changes in this commit.

Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-07 14:41:02 -06:00
Jens Axboe c0f3fd2b38 blk-mq: fix deadlock in blk_mq_register_disk() error path
If we fail registering any of the hardware queues, we call
into blk_mq_unregister_disk() with the hotplug mutex already
held. Since blk_mq_unregister_disk() attempts to acquire the
same mutex, we end up in a less than happy place.

Reported-by: Jinpu Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-04 14:19:16 -06:00
Dan Williams df08c32ce3 block: fix bdi vs gendisk lifetime mismatch
The name for a bdi of a gendisk is derived from the gendisk's devt.
However, since the gendisk is destroyed before the bdi it leaves a
window where a new gendisk could dynamically reuse the same devt while a
bdi with the same name is still live.  Arrange for the bdi to hold a
reference against its "owner" disk device while it is registered.
Otherwise we can hit sysfs duplicate name collisions like the following:

 WARNING: CPU: 10 PID: 2078 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x64/0x80
 sysfs: cannot create duplicate filename '/devices/virtual/bdi/259:1'

 Hardware name: HP ProLiant DL580 Gen8, BIOS P79 05/06/2015
  0000000000000286 0000000002c04ad5 ffff88006f24f970 ffffffff8134caec
  ffff88006f24f9c0 0000000000000000 ffff88006f24f9b0 ffffffff8108c351
  0000001f0000000c ffff88105d236000 ffff88105d1031e0 ffff8800357427f8
 Call Trace:
  [<ffffffff8134caec>] dump_stack+0x63/0x87
  [<ffffffff8108c351>] __warn+0xd1/0xf0
  [<ffffffff8108c3cf>] warn_slowpath_fmt+0x5f/0x80
  [<ffffffff812a0d34>] sysfs_warn_dup+0x64/0x80
  [<ffffffff812a0e1e>] sysfs_create_dir_ns+0x7e/0x90
  [<ffffffff8134faaa>] kobject_add_internal+0xaa/0x320
  [<ffffffff81358d4e>] ? vsnprintf+0x34e/0x4d0
  [<ffffffff8134ff55>] kobject_add+0x75/0xd0
  [<ffffffff816e66b2>] ? mutex_lock+0x12/0x2f
  [<ffffffff8148b0a5>] device_add+0x125/0x610
  [<ffffffff8148b788>] device_create_groups_vargs+0xd8/0x100
  [<ffffffff8148b7cc>] device_create_vargs+0x1c/0x20
  [<ffffffff811b775c>] bdi_register+0x8c/0x180
  [<ffffffff811b7877>] bdi_register_dev+0x27/0x30
  [<ffffffff813317f5>] add_disk+0x175/0x4a0

Cc: <stable@vger.kernel.org>
Reported-by: Yi Zhang <yizhan@redhat.com>
Tested-by: Yi Zhang <yizhan@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

Fixed up missing 0 return in bdi_register_owner().

Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-04 14:19:16 -06:00
Gabriel Krisman Bertazi 71f79fb317 blk-mq: Allow timeouts to run while queue is freezing
In case a submitted request gets stuck for some reason, the block layer
can prevent the request starvation by starting the scheduled timeout work.
If this stuck request occurs at the same time another thread has started
a queue freeze, the blk_mq_timeout_work will not be able to acquire the
queue reference and will return silently, thus not issuing the timeout.
But since the request is already holding a q_usage_counter reference and
is unable to complete, it will never release its reference, preventing
the queue from completing the freeze started by first thread.  This puts
the request_queue in a hung state, forever waiting for the freeze
completion.

This was observed while running IO to a NVMe device at the same time we
toggled the CPU hotplug code. Eventually, once a request got stuck
requiring a timeout during a queue freeze, we saw the CPU Hotplug
notification code get stuck inside blk_mq_freeze_queue_wait, as shown in
the trace below.

[c000000deaf13690] [c000000deaf13738] 0xc000000deaf13738 (unreliable)
[c000000deaf13860] [c000000000015ce8] __switch_to+0x1f8/0x350
[c000000deaf138b0] [c000000000ade0e4] __schedule+0x314/0x990
[c000000deaf13940] [c000000000ade7a8] schedule+0x48/0xc0
[c000000deaf13970] [c0000000005492a4] blk_mq_freeze_queue_wait+0x74/0x110
[c000000deaf139e0] [c00000000054b6a8] blk_mq_queue_reinit_notify+0x1a8/0x2e0
[c000000deaf13a40] [c0000000000e7878] notifier_call_chain+0x98/0x100
[c000000deaf13a90] [c0000000000b8e08] cpu_notify_nofail+0x48/0xa0
[c000000deaf13ac0] [c0000000000b92f0] _cpu_down+0x2a0/0x400
[c000000deaf13b90] [c0000000000b94a8] cpu_down+0x58/0xa0
[c000000deaf13bc0] [c0000000006d5dcc] cpu_subsys_offline+0x2c/0x50
[c000000deaf13bf0] [c0000000006cd244] device_offline+0x104/0x140
[c000000deaf13c30] [c0000000006cd40c] online_store+0x6c/0xc0
[c000000deaf13c80] [c0000000006c8c78] dev_attr_store+0x68/0xa0
[c000000deaf13cc0] [c0000000003974d0] sysfs_kf_write+0x80/0xb0
[c000000deaf13d00] [c0000000003963e8] kernfs_fop_write+0x188/0x200
[c000000deaf13d50] [c0000000002e0f6c] __vfs_write+0x6c/0xe0
[c000000deaf13d90] [c0000000002e1ca0] vfs_write+0xc0/0x230
[c000000deaf13de0] [c0000000002e2cdc] SyS_write+0x6c/0x110
[c000000deaf13e30] [c000000000009204] system_call+0x38/0xb4

The fix is to allow the timeout work to execute in the window between
dropping the initial refcount reference and the release of the last
reference, which actually marks the freeze completion.  This can be
achieved with percpu_refcount_tryget, which does not require the counter
to be alive.  This way the timeout work can do it's job and terminate a
stuck request even during a freeze, returning its reference and avoiding
the deadlock.

Allowing the timeout to run is just a part of the fix, since for some
devices, we might get stuck again inside the device driver's timeout
handler, should it attempt to allocate a new request in that path -
which is a quite common action for Abort commands, which need to be sent
after a timeout.  In NVMe, for instance, we call blk_mq_alloc_request
from inside the timeout handler, which will fail during a freeze, since
it also tries to acquire a queue reference.

I considered a similar change to blk_mq_alloc_request as a generic
solution for further device driver hangs, but we can't do that, since it
would allow new requests to disturb the freeze process.  I thought about
creating a new function in the block layer to support unfreezable
requests for these occasions, but after working on it for a while, I
feel like this should be handled in a per-driver basis.  I'm now
experimenting with changes to the NVMe timeout path, but I'm open to
suggestions of ways to make this generic.

Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
Cc: Brian King <brking@linux.vnet.ibm.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: linux-nvme@lists.infradead.org
Cc: linux-block@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-04 14:19:16 -06:00
Vegard Nossum 77da160530 block: fix use-after-free in seq file
I got a KASAN report of use-after-free:

    ==================================================================
    BUG: KASAN: use-after-free in klist_iter_exit+0x61/0x70 at addr ffff8800b6581508
    Read of size 8 by task trinity-c1/315
    =============================================================================
    BUG kmalloc-32 (Not tainted): kasan: bad access detected
    -----------------------------------------------------------------------------

    Disabling lock debugging due to kernel taint
    INFO: Allocated in disk_seqf_start+0x66/0x110 age=144 cpu=1 pid=315
            ___slab_alloc+0x4f1/0x520
            __slab_alloc.isra.58+0x56/0x80
            kmem_cache_alloc_trace+0x260/0x2a0
            disk_seqf_start+0x66/0x110
            traverse+0x176/0x860
            seq_read+0x7e3/0x11a0
            proc_reg_read+0xbc/0x180
            do_loop_readv_writev+0x134/0x210
            do_readv_writev+0x565/0x660
            vfs_readv+0x67/0xa0
            do_preadv+0x126/0x170
            SyS_preadv+0xc/0x10
            do_syscall_64+0x1a1/0x460
            return_from_SYSCALL_64+0x0/0x6a
    INFO: Freed in disk_seqf_stop+0x42/0x50 age=160 cpu=1 pid=315
            __slab_free+0x17a/0x2c0
            kfree+0x20a/0x220
            disk_seqf_stop+0x42/0x50
            traverse+0x3b5/0x860
            seq_read+0x7e3/0x11a0
            proc_reg_read+0xbc/0x180
            do_loop_readv_writev+0x134/0x210
            do_readv_writev+0x565/0x660
            vfs_readv+0x67/0xa0
            do_preadv+0x126/0x170
            SyS_preadv+0xc/0x10
            do_syscall_64+0x1a1/0x460
            return_from_SYSCALL_64+0x0/0x6a

    CPU: 1 PID: 315 Comm: trinity-c1 Tainted: G    B           4.7.0+ #62
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
     ffffea0002d96000 ffff880119b9f918 ffffffff81d6ce81 ffff88011a804480
     ffff8800b6581500 ffff880119b9f948 ffffffff8146c7bd ffff88011a804480
     ffffea0002d96000 ffff8800b6581500 fffffffffffffff4 ffff880119b9f970
    Call Trace:
     [<ffffffff81d6ce81>] dump_stack+0x65/0x84
     [<ffffffff8146c7bd>] print_trailer+0x10d/0x1a0
     [<ffffffff814704ff>] object_err+0x2f/0x40
     [<ffffffff814754d1>] kasan_report_error+0x221/0x520
     [<ffffffff8147590e>] __asan_report_load8_noabort+0x3e/0x40
     [<ffffffff83888161>] klist_iter_exit+0x61/0x70
     [<ffffffff82404389>] class_dev_iter_exit+0x9/0x10
     [<ffffffff81d2e8ea>] disk_seqf_stop+0x3a/0x50
     [<ffffffff8151f812>] seq_read+0x4b2/0x11a0
     [<ffffffff815f8fdc>] proc_reg_read+0xbc/0x180
     [<ffffffff814b24e4>] do_loop_readv_writev+0x134/0x210
     [<ffffffff814b4c45>] do_readv_writev+0x565/0x660
     [<ffffffff814b8a17>] vfs_readv+0x67/0xa0
     [<ffffffff814b8de6>] do_preadv+0x126/0x170
     [<ffffffff814b92ec>] SyS_preadv+0xc/0x10

This problem can occur in the following situation:

open()
 - pread()
    - .seq_start()
       - iter = kmalloc() // succeeds
       - seqf->private = iter
    - .seq_stop()
       - kfree(seqf->private)
 - pread()
    - .seq_start()
       - iter = kmalloc() // fails
    - .seq_stop()
       - class_dev_iter_exit(seqf->private) // boom! old pointer

As the comment in disk_seqf_stop() says, stop is called even if start
failed, so we need to reinitialise the private pointer to NULL when seq
iteration stops.

An alternative would be to set the private pointer to NULL when the
kmalloc() in disk_seqf_start() fails.

Cc: stable@vger.kernel.org
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-04 14:19:16 -06:00
Paolo Valente 20bd723ec6 block: add missing group association in bio-cloning functions
When a bio is cloned, the newly created bio must be associated with
the same blkcg as the original bio (if BLK_CGROUP is enabled). If
this operation is not performed, then the new bio is not associated
with any group, and the group of the current task is returned when
the group of the bio is requested.

Depending on the cloning frequency, this may cause a large
percentage of the bios belonging to a given group to be treated
as if belonging to other groups (in most cases as if belonging to
the root group). The expected group isolation may thereby be broken.

This commit adds the missing association in bio-cloning functions.

Fixes: da2f0f74cf ("Btrfs: add support for blkio controllers")
Cc: stable@vger.kernel.org # v4.3+

Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Reviewed-by: Nikolay Borisov <kernel@kyup.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-04 14:19:16 -06:00
Hou Tao bfd279a868 blkcg: kill unused field nr_undestroyed_grps
'nr_undestroyed_grps' in struct throtl_data was used to count
the number of throtl_grp related with throtl_data, but now
throtl_grp is tracked by blkcg_gq, so it is useless anymore.

Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-04 14:19:16 -06:00