ocfs2_reflink_inodes_lock() can swap the inode1/inode2 variables so that
we always grab cluster locks in order of increasing inode number.
Unfortunately, we forget to swap the inode record buffer head pointers
when we've done this, which leads to incorrect bookkeepping when we're
trying to make the two inodes have the same refcount tree.
This has the effect of causing filesystem shutdowns if you're trying to
reflink data from inode 100 into inode 97, where inode 100 already has a
refcount tree attached and inode 97 doesn't. The reflink code decides
to copy the refcount tree pointer from 100 to 97, but uses inode 97's
inode record to open the tree root (which it doesn't have) and blows up.
This issue causes filesystem shutdowns and metadata corruption!
Link: http://lkml.kernel.org/r/20190312214910.GK20533@magnolia
Fixes: 29ac8e856c ("ocfs2: implement the VFS clone_range, copy_range, and dedupe_range features")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Joseph Qi <jiangqi903@gmail.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit f1dd2cd13c ("mm, memory_hotplug: do not associate hotadded
memory to zones until online") introduced move_pfn_range_to_zone() which
calls memmap_init_zone() during onlining a memory block.
memmap_init_zone() will reset pagetype flags and makes migrate type to
be MOVABLE.
However, in __offline_pages(), it also call undo_isolate_page_range()
after offline_isolated_pages() to do the same thing. Due to commit
2ce13640b3 ("mm: __first_valid_page skip over offline pages") changed
__first_valid_page() to skip offline pages, undo_isolate_page_range()
here just waste CPU cycles looping around the offlining PFN range while
doing nothing, because __first_valid_page() will return NULL as
offline_isolated_pages() has already marked all memory sections within
the pfn range as offline via offline_mem_sections().
Also, after calling the "useless" undo_isolate_page_range() here, it
reaches the point of no returning by notifying MEM_OFFLINE. Those pages
will be marked as MIGRATE_MOVABLE again once onlining. The only thing
left to do is to decrease the number of isolated pageblocks zone counter
which would make some paths of the page allocation slower that the above
commit introduced.
Even if alloc_contig_range() can be used to isolate 16GB-hugetlb pages
on ppc64, an "int" should still be enough to represent the number of
pageblocks there. Fix an incorrect comment along the way.
[cai@lca.pw: v4]
Link: http://lkml.kernel.org/r/20190314150641.59358-1-cai@lca.pw
Link: http://lkml.kernel.org/r/20190313143133.46200-1-cai@lca.pw
Fixes: 2ce13640b3 ("mm: __first_valid_page skip over offline pages")
Signed-off-by: Qian Cai <cai@lca.pw>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org> [4.13+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
syzbot is hitting lockdep warning [1] due to trying to open a fifo
during an execve() operation. But we don't need to open non regular
files during an execve() operation, for all files which we will need are
the executable file itself and the interpreter programs like /bin/sh and
ld-linux.so.2 .
Since the manpage for execve(2) says that execve() returns EACCES when
the file or a script interpreter is not a regular file, and the manpage
for uselib(2) says that uselib() can return EACCES, and we use
FMODE_EXEC when opening for execve()/uselib(), we can bail out if a non
regular file is requested with FMODE_EXEC set.
Since this deadlock followed by khungtaskd warnings is trivially
reproducible by a local unprivileged user, and syzbot's frequent crash
due to this deadlock defers finding other bugs, let's workaround this
deadlock until we get a chance to find a better solution.
[1] https://syzkaller.appspot.com/bug?id=b5095bfec44ec84213bac54742a82483aad578ce
Link: http://lkml.kernel.org/r/1552044017-7890-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp
Reported-by: syzbot <syzbot+e93a80c1bb7c5c56e522461c149f8bf55eab1b2b@syzkaller.appspotmail.com>
Fixes: 8924feff66 ("splice: lift pipe_lock out of splice_to_pipe()")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org> [4.9+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add my email in the mailmap file to have a consistent shortlog output.
Link: http://lkml.kernel.org/r/20190308142103.4929-1-changbin.du@gmail.com
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
atomic64_read() on ppc64le returns "long int", so fix the same way as
commit d549f545e6 ("drm/virtio: use %llu format string form
atomic64_t") by adding a cast to u64, which makes it work on all arches.
In file included from ./include/linux/printk.h:7,
from ./include/linux/kernel.h:15,
from mm/debug.c:9:
mm/debug.c: In function 'dump_mm':
./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 19 has type 'long int' [-Wformat=]
#define KERN_SOH "A" /* ASCII Start Of Header */
^~~~~~
./include/linux/kern_levels.h:8:20: note: in expansion of macro
'KERN_SOH'
#define KERN_EMERG KERN_SOH "0" /* system is unusable */
^~~~~~~~
./include/linux/printk.h:297:9: note: in expansion of macro 'KERN_EMERG'
printk(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
^~~~~~~~~~
mm/debug.c:133:2: note: in expansion of macro 'pr_emerg'
pr_emerg("mm %px mmap %px seqnum %llu task_size %lu"
^~~~~~~~
mm/debug.c:140:17: note: format string is defined here
"pinned_vm %llx data_vm %lx exec_vm %lx stack_vm %lx"
~~~^
%lx
Link: http://lkml.kernel.org/r/20190310183051.87303-1-cai@lca.pw
Fixes: 70f8a3ca68 ("mm: make mm->pinned_vm an atomic64 counter")
Signed-off-by: Qian Cai <cai@lca.pw>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Aneesh has reported that PPC triggers the following warning when
excercising DAX code:
IP set_pte_at+0x3c/0x190
LR insert_pfn+0x208/0x280
Call Trace:
insert_pfn+0x68/0x280
dax_iomap_pte_fault.isra.7+0x734/0xa40
__xfs_filemap_fault+0x280/0x2d0
do_wp_page+0x48c/0xa40
__handle_mm_fault+0x8d0/0x1fd0
handle_mm_fault+0x140/0x250
__do_page_fault+0x300/0xd60
handle_page_fault+0x18
Now that is WARN_ON in set_pte_at which is
VM_WARN_ON(pte_hw_valid(*ptep) && !pte_protnone(*ptep));
The problem is that on some architectures set_pte_at() cannot cope with
a situation where there is already some (different) valid entry present.
Use ptep_set_access_flags() instead to modify the pfn which is built to
deal with modifying existing PTE.
Link: http://lkml.kernel.org/r/20190311084537.16029-1-jack@suse.cz
Fixes: b2770da642 "mm: add vm_insert_mixed_mkwrite()"
Signed-off-by: Jan Kara <jack@suse.cz>
Reported-by: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: Chandan Rajendra <chandan@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
set_tag() compiles away when CONFIG_KASAN_SW_TAGS=n, so make
arch_kasan_set_tag() a static inline function to fix warnings below.
mm/kasan/common.c: In function '__kasan_kmalloc':
mm/kasan/common.c:475:5: warning: variable 'tag' set but not used [-Wunused-but-set-variable]
u8 tag;
^~~
Link: http://lkml.kernel.org/r/20190307185244.54648-1-cai@lca.pw
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The marshalling of AFS.StoreData, AFS.StoreData64 and YFS.StoreData64 calls
generated by ->setattr() ops for the purpose of expanding a file is
incorrect due to older documentation incorrectly describing the way the RPC
'FileLength' parameter is meant to work.
The older documentation says that this is the length the file is meant to
end up at the end of the operation; however, it was never implemented this
way in any of the servers, but rather the file is truncated down to this
before the write operation is effected, and never expanded to it (and,
indeed, it was renamed to 'TruncPos' in 2014).
Fix this by setting the position parameter to the new file length and doing
a zero-lengh write there.
The bug causes Xwayland to SIGBUS due to unexpected non-expansion of a file
it then mmaps. This can be tested by giving the following test program a
filename in an AFS directory:
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <fcntl.h>
#include <sys/mman.h>
int main(int argc, char *argv[])
{
char *p;
int fd;
if (argc != 2) {
fprintf(stderr,
"Format: test-trunc-mmap <file>\n");
exit(2);
}
fd = open(argv[1], O_RDWR | O_CREAT | O_TRUNC);
if (fd < 0) {
perror(argv[1]);
exit(1);
}
if (ftruncate(fd, 0x140008) == -1) {
perror("ftruncate");
exit(1);
}
p = mmap(NULL, 4096, PROT_READ | PROT_WRITE,
MAP_SHARED, fd, 0);
if (p == MAP_FAILED) {
perror("mmap");
exit(1);
}
p[0] = 'a';
if (munmap(p, 4096) < 0) {
perror("munmap");
exit(1);
}
if (close(fd) < 0) {
perror("close");
exit(1);
}
exit(0);
}
Fixes: 31143d5d51 ("AFS: implement basic file write support")
Reported-by: Jonathan Billings <jsbillin@umich.edu>
Tested-by: Jonathan Billings <jsbillin@umich.edu>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Update the mount API docs to reflect recent changes to the code.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Fix early free of the channel program in vfio
- On AP device removal make sure that all messages are flushed
with the driver still attached that queued the message
- Limit brk randomization to 32MB to reduce the chance that the
heap of ld.so is placed after the main stack
- Add a rolling average for the steal time of a CPU, this will be
needed for KVM to decide when to do busy waiting
- Fix a warning in the CPU-MF code
- Add a notification handler for AP configuration change to react
faster to new AP devices
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJcnIq7AAoJEDjwexyKj9rgddUH/3VQP6BMvq2fwAsLqx8JeYgT
082xzP2nHli3tO6m8fFHmtqrSg5KTEDfuQVafqp92LeEMKUNWQI6kRu7rXeAVBct
M6hx21mqkm9VNjAlAjSq8IAUXP2K6/K0BMD5mYInYYYVRvJm3on4sHnkEj0kvXbm
OGxwnNBd9UnH5g6ti2vW4cyDvs0aqj1eDbSudy5KedumQz5J2XdFPn4f4Ej6p2+t
nuvlZFDnZ2Z4rliE3RFCuKExZR+YFZgS1urm6pcklncfvbJRsqFJ+nvhurskDUI3
4gOp1Yv1tvGNv/cNVEtnz8g/Kg8/sI7evjQBtxhtEsV/W0sbZPnjCt+28Cf1DN4=
=4nL7
-----END PGP SIGNATURE-----
Merge tag 's390-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
"Improvements and bug fixes for 5.1-rc2:
- Fix early free of the channel program in vfio
- On AP device removal make sure that all messages are flushed with
the driver still attached that queued the message
- Limit brk randomization to 32MB to reduce the chance that the heap
of ld.so is placed after the main stack
- Add a rolling average for the steal time of a CPU, this will be
needed for KVM to decide when to do busy waiting
- Fix a warning in the CPU-MF code
- Add a notification handler for AP configuration change to react
faster to new AP devices"
* tag 's390-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cpumf: Fix warning from check_processor_id
zcrypt: handle AP Info notification from CHSC SEI command
vfio: ccw: only free cp on final interrupt
s390/vtime: steal time exponential moving average
s390/zcrypt: revisit ap device remove procedure
s390: limit brk randomization to 32MB
A couple of minor fixes only for now
- Incorrect DMA channels on Renesas R-Car
- Broadcom bcm2835 error handling fixes
- Kconfig dependency fixes for bcm2835 and davinci
- CPU idle wakeup fix for i.MX6
- MMC regression on Tegra186
- Incorrect phy settings on one imx board
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=nCso
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"A couple of minor fixes only for now
- fix for incorrect DMA channels on Renesas R-Car
- Broadcom bcm2835 error handling fixes
- Kconfig dependency fixes for bcm2835 and davinci
- CPU idle wakeup fix for i.MX6
- MMC regression on Tegra186
- fix incorrect phy settings on one imx board"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: tegra: Disable CQE Support for SDMMC4 on Tegra186
ARM: dts: nomadik: Fix polarity of SPI CS
ARM: davinci: fix build failure with allnoconfig
ARM: imx_v4_v5_defconfig: enable PWM driver
ARM: imx_v6_v7_defconfig: continue compiling the pwm driver
ARM: dts: imx6dl-yapp4: Use correct pseudo PHY address for the switch
ARM: dts: imx6qdl: Fix typo in imx6qdl-icore-rqs.dtsi
ARM: dts: imx6ull: Use the correct style for SPDX License Identifier
ARM: dts: pfla02: increase phy reset duration
ARM: imx6q: cpuidle: fix bug that CPU might not wake up at expected time
ARM: imx51: fix a leaked reference by adding missing of_node_put
ARM: dts: imx6dl-yapp4: Use rgmii-id phy mode on the cpu port
arm64: bcm2835: Add missing dependency on MFD_CORE.
ARM: dts: bcm283x: Fix hdmi hpd gpio pull
soc: bcm: bcm2835-pm: Fix error paths of initialization.
soc: bcm: bcm2835-pm: Fix PM_IMAGE_PERI power domain support.
arm64: dts: renesas: r8a774c0: Fix SCIF5 DMA channels
arm64: dts: renesas: r8a77990: Fix SCIF5 DMA channels
Function __hw_perf_event_init() used a CPU variable without
ensuring CPU preemption has been disabled. This caused the
following warning in the kernel log:
[ 7.277085] BUG: using smp_processor_id() in preemptible
[00000000] code: cf-csdiag/1892
[ 7.277111] caller is cf_diag_event_init+0x13a/0x338
[ 7.277122] CPU: 10 PID: 1892 Comm: cf-csdiag Not tainted
5.0.0-20190318.rc0.git0.9e1a11e0f602.300.fc29.s390x+debug #1
[ 7.277131] Hardware name: IBM 2964 NC9 712 (LPAR)
[ 7.277139] Call Trace:
[ 7.277150] ([<000000000011385a>] show_stack+0x82/0xd0)
[ 7.277161] [<0000000000b7a71a>] dump_stack+0x92/0xd0
[ 7.277174] [<00000000007b7e9c>] check_preemption_disabled+0xe4/0x100
[ 7.277183] [<00000000001228aa>] cf_diag_event_init+0x13a/0x338
[ 7.277195] [<00000000002cf3aa>] perf_try_init_event+0x72/0xf0
[ 7.277204] [<00000000002d0bba>] perf_event_alloc+0x6fa/0xce0
[ 7.277214] [<00000000002dc4a8>] __s390x_sys_perf_event_open+0x398/0xd50
[ 7.277224] [<0000000000b9e8f0>] system_call+0xdc/0x2d8
[ 7.277233] 2 locks held by cf-csdiag/1892:
[ 7.277241] #0: 00000000976f5510 (&sig->cred_guard_mutex){+.+.},
at: __s390x_sys_perf_event_open+0xd2e/0xd50
[ 7.277257] #1: 00000000363b11bd (&pmus_srcu){....},
at: perf_event_alloc+0x52e/0xce0
The variable is now accessed in proper context. Use
get_cpu_var()/put_cpu_var() pair to disable
preemption during access.
As the hardware authorization settings apply to all CPUs, it
does not matter which CPU is used to check the authorization setting.
Remove the event->count assignment. It is not needed as function
perf_event_alloc() allocates memory for the event with kzalloc() and
thus count is already set to zero.
Fixes: fe5908bccc ("s390/cpum_cf_diag: Add support for s390 counter facility diagnostic trace")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Pull networking fixes from David Miller:
"Fixes here and there, a couple new device IDs, as usual:
1) Fix BQL race in dpaa2-eth driver, from Ioana Ciornei.
2) Fix 64-bit division in iwlwifi, from Arnd Bergmann.
3) Fix documentation for some eBPF helpers, from Quentin Monnet.
4) Some UAPI bpf header sync with tools, also from Quentin Monnet.
5) Set descriptor ownership bit at the right time for jumbo frames in
stmmac driver, from Aaro Koskinen.
6) Set IFF_UP properly in tun driver, from Eric Dumazet.
7) Fix load/store doubleword instruction generation in powerpc eBPF
JIT, from Naveen N. Rao.
8) nla_nest_start() return value checks all over, from Kangjie Lu.
9) Fix asoc_id handling in SCTP after the SCTP_*_ASSOC changes this
merge window. From Marcelo Ricardo Leitner and Xin Long.
10) Fix memory corruption with large MTUs in stmmac, from Aaro
Koskinen.
11) Do not use ipv4 header for ipv6 flows in TCP and DCCP, from Eric
Dumazet.
12) Fix topology subscription cancellation in tipc, from Erik Hugne.
13) Memory leak in genetlink error path, from Yue Haibing.
14) Valid control actions properly in packet scheduler, from Davide
Caratti.
15) Even if we get EEXIST, we still need to rehash if a shrink was
delayed. From Herbert Xu.
16) Fix interrupt mask handling in interrupt handler of r8169, from
Heiner Kallweit.
17) Fix leak in ehea driver, from Wen Yang"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (168 commits)
dpaa2-eth: fix race condition with bql frame accounting
chelsio: use BUG() instead of BUG_ON(1)
net: devlink: skip info_get op call if it is not defined in dumpit
net: phy: bcm54xx: Encode link speed and activity into LEDs
tipc: change to check tipc_own_id to return in tipc_net_stop
net: usb: aqc111: Extend HWID table by QNAP device
net: sched: Kconfig: update reference link for PIE
net: dsa: qca8k: extend slave-bus implementations
net: dsa: qca8k: remove leftover phy accessors
dt-bindings: net: dsa: qca8k: support internal mdio-bus
dt-bindings: net: dsa: qca8k: fix example
net: phy: don't clear BMCR in genphy_soft_reset
bpf, libbpf: clarify bump in libbpf version info
bpf, libbpf: fix version info and add it to shared object
rxrpc: avoid clang -Wuninitialized warning
tipc: tipc clang warning
net: sched: fix cleanup NULL pointer exception in act_mirr
r8169: fix cable re-plugging issue
net: ethernet: ti: fix possible object reference leak
net: ibm: fix possible object reference leak
...
Highlights include:
Stable fixes:
- Fix nfs4_lock_state refcounting in nfs4_alloc_{lock,unlock}data()
- fix mount/umount race in nlmclnt.
- NFSv4.1 don't free interrupted slot on open
Bugfixes:
- Don't let RPC_SOFTCONN tasks time out if the transport is connected
- Fix a typo in nfs_init_timeout_values()
- Fix layoutstats handling during read failovers
- fix uninitialized variable warning
-----BEGIN PGP SIGNATURE-----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=d5ft
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-5.1-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:
Stable fixes:
- Fix nfs4_lock_state refcounting in nfs4_alloc_{lock,unlock}data()
- fix mount/umount race in nlmclnt.
- NFSv4.1 don't free interrupted slot on open
Bugfixes:
- Don't let RPC_SOFTCONN tasks time out if the transport is connected
- Fix a typo in nfs_init_timeout_values()
- Fix layoutstats handling during read failovers
- fix uninitialized variable warning"
* tag 'nfs-for-5.1-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
SUNRPC: fix uninitialized variable warning
pNFS/flexfiles: Fix layoutstats handling during read failovers
NFS: Fix a typo in nfs_init_timeout_values()
SUNRPC: Don't let RPC_SOFTCONN tasks time out if the transport is connected
NFSv4.1 don't free interrupted slot on open
NFS: fix mount/umount race in nlmclnt.
NFS: Fix nfs4_lock_state refcounting in nfs4_alloc_{lock,unlock}data()
Avoid following compiler warning on uninitialized variable
net/sunrpc/xprtsock.c: In function ‘xs_read_stream_request.constprop’:
net/sunrpc/xprtsock.c:525:10: warning: ‘read’ may be used uninitialized in this function [-Wmaybe-uninitialized]
return read;
^~~~
net/sunrpc/xprtsock.c:529:23: warning: ‘ret’ may be used uninitialized in this function [-Wmaybe-uninitialized]
return ret < 0 ? ret : read;
~~~~~~~~~~~~~~^~~~~~
Signed-off-by: Alakesh Haloi <alakesh.haloi@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
It might happen that Tx conf acknowledges a frame before it was
subscribed in bql, as subscribing was previously done after the enqueue
operation.
This patch moves the netdev_tx_sent_queue call before the actual frame
enqueue, so that this can never happen.
Fixes: 569dac6a5a ("dpaa2-eth: bql support")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
clang warns about possible bugs in a dead code branch after
BUG_ON(1) when CONFIG_PROFILE_ALL_BRANCHES is enabled:
drivers/net/ethernet/chelsio/cxgb4/sge.c:479:3: error: variable 'buf_size' is used uninitialized whenever 'if'
condition is false [-Werror,-Wsometimes-uninitialized]
BUG_ON(1);
^~~~~~~~~
include/asm-generic/bug.h:61:36: note: expanded from macro 'BUG_ON'
#define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0)
^~~~~~~~~~~~~~~~~~~
include/linux/compiler.h:48:23: note: expanded from macro 'unlikely'
# define unlikely(x) (__branch_check__(x, 0, __builtin_constant_p(x)))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/chelsio/cxgb4/sge.c:482:9: note: uninitialized use occurs here
return buf_size;
^~~~~~~~
drivers/net/ethernet/chelsio/cxgb4/sge.c:479:3: note: remove the 'if' if its condition is always true
BUG_ON(1);
^
include/asm-generic/bug.h:61:32: note: expanded from macro 'BUG_ON'
#define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0)
^
drivers/net/ethernet/chelsio/cxgb4/sge.c:459:14: note: initialize the variable 'buf_size' to silence this warning
int buf_size;
^
= 0
Use BUG() here to create simpler code that clang understands
correctly.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In dumpit, unlike doit, the check for info_get op being defined
is missing. Add it and avoid null pointer dereference in case driver
does not define this op.
Fixes: f9cf22882c ("devlink: add device information API")
Reported-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously the green and amber LEDs on this quad PHY were solid, to
indicate an encoding of the link speed (10/100/1000).
This keeps the LEDs always on just as before, but now they flash on
Rx/Tx activity.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When running a syz script, a panic occurred:
[ 156.088228] BUG: KASAN: use-after-free in tipc_disc_timeout+0x9c9/0xb20 [tipc]
[ 156.094315] Call Trace:
[ 156.094844] <IRQ>
[ 156.095306] dump_stack+0x7c/0xc0
[ 156.097346] print_address_description+0x65/0x22e
[ 156.100445] kasan_report.cold.3+0x37/0x7a
[ 156.102402] tipc_disc_timeout+0x9c9/0xb20 [tipc]
[ 156.106517] call_timer_fn+0x19a/0x610
[ 156.112749] run_timer_softirq+0xb51/0x1090
It was caused by the netns freed without deleting the discoverer timer,
while later on the netns would be accessed in the timer handler.
The timer should have been deleted by tipc_net_stop() when cleaning up a
netns. However, tipc has been able to enable a bearer and start d->timer
without the local node_addr set since Commit 52dfae5c85 ("tipc: obtain
node identity from interface by default"), which caused the timer not to
be deleted in tipc_net_stop() then.
So fix it in tipc_net_stop() by changing to check local node_id instead
of local node_addr, as Jon suggested.
While at it, remove the calling of tipc_nametbl_withdraw() there, since
tipc_nametbl_stop() will take of the nametbl's freeing after.
Fixes: 52dfae5c85 ("tipc: obtain node identity from interface by default")
Reported-by: syzbot+a25307ad099309f1c2b9@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
New device of QNAP based on aqc111u
Add this ID to blacklist of cdc_ether driver as well
Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch implements accessors for the QCA8337 MDIO access
through the MDIO_MASTER register, which makes it possible to
access the PHYs on slave-bus through the switch. In cases
where the switch ports are already mapped via external
"phy-phandles", the internal mdio-bus is disabled in order to
prevent a duplicated discovery and enumeration of the same
PHYs. Don't use mixed external and internal mdio-bus
configurations, as this is not supported by the hardware.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This belated patch implements Andrew Lunn's request of
"remove the phy_read() and phy_write() functions."
<https://lore.kernel.org/patchwork/comment/902734/>
While seemingly harmless, this causes the switch's user
port PHYs to get registered twice. This is because the
DSA subsystem will create a slave mdio-bus not knowing
that the qca8k_phy_(read|write) accessors operate on
the external mdio-bus. So the same "bus" gets effectively
duplicated.
Cc: stable@vger.kernel.org
Fixes: 6b93fb4648 ("net-next: dsa: add new driver for qca8xxx family")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch updates the qca8k's binding to document to the
approach for using the internal mdio-bus of the supported
qca8k switches.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the example, the phy at phy@0 is clashing with
the switch0@0 at the same address. Usually, the switches
are accessible through pseudo PHYs which in case of the
qca8k are located at 0x10 - 0x18.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- A fix to a double free in the histogram code
- Uninitialized variable fix
- Use NULL instead of zero fix and spelling fixes
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXJodrhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6ql6tAQDo5lGABVUkW79Mb7KzkUMN5O5di7XE
ynn13mhJz19ZDgD/RZIXjY8rxUg0Tw0QsgvToAExlaURvLIV0cbF9C01EgA=
=zSic
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Three small fixes:
- A fix to a double free in the histogram code
- Uninitialized variable fix
- Use NULL instead of zero fix and spelling fixes"
* tag 'trace-v5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Fix warning using plain integer as NULL & spelling corrections
tracing: initialize variable in create_dyn_event()
tracing: Remove unnecessary var_ref destroy in track_data_destroy()
-----BEGIN PGP SIGNATURE-----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=aQ8F
-----END PGP SIGNATURE-----
Merge tag 'locks-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux
Pull file locking bugfix from Jeff Layton:
"Just a single fix for a bug that crept into POSIX lock deadlock
detection in v5.0"
* tag 'locks-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
locks: wake any locks blocked on request before deadlock check
Fix compile warning in create_dyn_event(): 'ret' may be used uninitialized
in this function [-Wuninitialized].
Link: http://lkml.kernel.org/r/1553237900-8555-1-git-send-email-frowand.list@gmail.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Fixes: 5448d44c38 ("tracing: Add unified dynamic event framework")
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
So far we effectively clear the BMCR register. Some PHY's can deal
with this (e.g. because they reset BMCR to a default as part of a
soft-reset) whilst on others this causes issues because e.g. the
autoneg bit is cleared. Marvell is an example, see also thread [0].
So let's be a little bit more gentle and leave all bits we're not
interested in as-is. This change is needed for PHY drivers to
properly deal with the original patch.
[0] https://marc.info/?t=155264050700001&r=1&w=2
Fixes: 6e2d85ec05 ("net: phy: Stop with excessive soft reset")
Tested-by: Phil Reid <preid@electromag.com.au>
Tested-by: liweihang <liweihang@hisilicon.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 1aec421120.
Steven Rostedt reports that it causes a hang at bootup and bisected it
to this commit.
The troigger is apparently a module alias for "parport_lowlevel" that
points to "parport_pc", which causes a hang with
modprobe -q -- parport_lowlevel
blocking forever with a backtrace like this:
wait_for_completion_killable+0x1c/0x28
call_usermodehelper_exec+0xa7/0x108
__request_module+0x351/0x3d8
get_lowlevel_driver+0x28/0x41 [parport]
__parport_register_driver+0x39/0x1f4 [parport]
daisy_drv_init+0x31/0x4f [parport]
parport_bus_init+0x5d/0x7b [parport]
parport_default_proc_register+0x26/0x1000 [parport]
do_one_initcall+0xc2/0x1e0
do_init_module+0x50/0x1d4
load_module+0x1c2e/0x21b3
sys_init_module+0xef/0x117
Supid says:
"Due to the new device model daisy driver will now try to find the
parallel ports while trying to register its driver so that it can bind
with them. Now, since daisy driver is loaded while parport bus is
initialising the list of parport is still empty and it tries to load
the lowlevel driver, which has an alias set to parport_pc, now causes
a deadlock"
But I don't think the daisy driver should be loaded by the parport
initialization in the first place, so let's revert the whole change.
If the daisy driver can just initialize separately on its own (like a
driver should), instead of hooking into the parport init sequence
directly, this issue probably would go away.
Reported-and-bisected-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Enabling CQE support on Tegra186 Jetson TX2 has introduced a regression
that is causing accesses to the file-system on the eMMC to fail. Errors
such as the following have been observed ...
mmc2: running CQE recovery
mmc2: mmc_select_hs400 failed, error -110
print_req_error: I/O error, dev mmcblk2, sector 8 flags 80700
mmc2: cqhci: CQE failed to exit halt state
For now disable CQE support for Tegra186 until this issue is resolved.
Fixes: dfd3cb6feb arm64: tegra: Add CQE Support for SDMMC4
Signed-off-by: Jonathan Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Correct phy mode setting of imx6dl-yapp4 board to fix a problem
caused by commit 5ecdd77c61 ("net: dsa: qca8k: disable delay
for RGMII mode").
- Add a missing of_node_put call to fix leaked reference detected by
coccinelle in imx51 machine code.
- Fix imx6q cpuidle driver bug which causes that CPU might not wake up
at expected time.
- Increase reset duration of Ethernet phy Micrel KSZ9031RNX to fix
transmission timeouts error seen on imx6qdl-phytec-pfla02 board.
- Correct SPDX License Identifier style for imx6ull-pinfunc-snvs.h.
- Fix 'bus-witdh' typos in imx6qdl-icore-rqs.dtsi.
- Correct pseudo PHY address of switch device for imx6dl-yapp4 board.
- Update PWM driver options in imx defconfig files due to the change
on driver part.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJclKQNAAoJEFBXWFqHsHzOSugIAJGMo/4tEOijA6oysBhzwE3A
xy7nHp92RxAZEImjE14NRNgyS6zTZd51PWn3CQjjtw+x+6OBsk4kI+ftQvxp1irg
7ag6uvjZ5lPaW04tF6bUbI9vZd9+Fsy1z7D/hTzsPPj7w7iH+2rMgWsNwma/ZZ9r
UFmSfkgxE1kj8sHsnm3EoryKLeu69gD1p+chsWwe4/zxeo+yDeOQuXc1fc05HN5Y
JOPvHk8PWPDNHwhu8XX20aPGGZpjxi75uhwGDbIQnVCp/k4fDZyDxKfNKcZSrFbK
JsDxGRIRYd+TXM/E/UJ1TdXsmP6pUoyMXVJi3+0nk0QqLnQqjkdTP2O9MRt+Qng=
=jCPr
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.1:
- Correct phy mode setting of imx6dl-yapp4 board to fix a problem
caused by commit 5ecdd77c61 ("net: dsa: qca8k: disable delay
for RGMII mode").
- Add a missing of_node_put call to fix leaked reference detected by
coccinelle in imx51 machine code.
- Fix imx6q cpuidle driver bug which causes that CPU might not wake up
at expected time.
- Increase reset duration of Ethernet phy Micrel KSZ9031RNX to fix
transmission timeouts error seen on imx6qdl-phytec-pfla02 board.
- Correct SPDX License Identifier style for imx6ull-pinfunc-snvs.h.
- Fix 'bus-witdh' typos in imx6qdl-icore-rqs.dtsi.
- Correct pseudo PHY address of switch device for imx6dl-yapp4 board.
- Update PWM driver options in imx defconfig files due to the change
on driver part.
* tag 'imx-fixes-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v4_v5_defconfig: enable PWM driver
ARM: imx_v6_v7_defconfig: continue compiling the pwm driver
ARM: dts: imx6dl-yapp4: Use correct pseudo PHY address for the switch
ARM: dts: imx6qdl: Fix typo in imx6qdl-icore-rqs.dtsi
ARM: dts: imx6ull: Use the correct style for SPDX License Identifier
ARM: dts: pfla02: increase phy reset duration
ARM: imx6q: cpuidle: fix bug that CPU might not wake up at expected time
ARM: imx51: fix a leaked reference by adding missing of_node_put
ARM: dts: imx6dl-yapp4: Use rgmii-id phy mode on the cpu port
please pull the following:
- Eric provides fixes for the bcm2835-pm driver: added missing depends
on MFD_CORE for the ARM64 definition of ARCH_BCM2835, fixing error
paths on initialization and fixing the PM_IMAGE_PERI power domain
-----BEGIN PGP SIGNATURE-----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=0kxj
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.1/soc-fixes' of https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM/ARM64-based SoCs fixes for 5.1,
please pull the following:
- Eric provides fixes for the bcm2835-pm driver: added missing depends
on MFD_CORE for the ARM64 definition of ARCH_BCM2835, fixing error
paths on initialization and fixing the PM_IMAGE_PERI power domain
* tag 'arm-soc/for-5.1/soc-fixes' of https://github.com/Broadcom/stblinux:
arm64: bcm2835: Add missing dependency on MFD_CORE.
soc: bcm: bcm2835-pm: Fix error paths of initialization.
soc: bcm: bcm2835-pm: Fix PM_IMAGE_PERI power domain support.
5.1, please pull the following:
- Helen fixes the HDMI hot-pug detect GPIO polarity for the Rasperry Pi
model B revision 2
-----BEGIN PGP SIGNATURE-----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=XW7G
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.1/devicetree-fixes' of https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
5.1, please pull the following:
- Helen fixes the HDMI hot-pug detect GPIO polarity for the Rasperry Pi
model B revision 2
* tag 'arm-soc/for-5.1/devicetree-fixes' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm283x: Fix hdmi hpd gpio pull
The SPI DT bindings are for historical reasons a pitfall,
the ability to flag a GPIO line as active high/low with
the second cell flags was introduced later so the SPI
subsystem will only accept the bool flag spi-cs-high
to indicate that the line is active high.
It worked by mistake, but the mistake was corrected
in another commit.
The comment in the DTS file was also misleading: this
CS is indeed active high.
Fixes: cffbb02daf ("ARM: dts: nomadik: Augment NHK15 panel setting")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
allnoconfig build with just ARCH_DAVINCI enabled
fails because drivers/clk/davinci/* depends on
REGMAP being enabled.
Fix it by selecting REGMAP_MMIO when building in
DaVinci support.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Reviewed-by: David Lechner <david@lechnology.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Andreas reported that he was seeing the tdbtorture test fail in some
cases with -EDEADLCK when it wasn't before. Some debugging showed that
deadlock detection was sometimes discovering the caller's lock request
itself in a dependency chain.
While we remove the request from the blocked_lock_hash prior to
reattempting to acquire it, any locks that are blocked on that request
will still be present in the hash and will still have their fl_blocker
pointer set to the current request.
This causes posix_locks_deadlock to find a deadlock dependency chain
when it shouldn't, as a lock request cannot block itself.
We are going to end up waking all of those blocked locks anyway when we
go to reinsert the request back into the blocked_lock_hash, so just do
it prior to checking for deadlocks. This ensures that any lock blocked
on the current request will no longer be part of any blocked request
chain.
URL: https://bugzilla.kernel.org/show_bug.cgi?id=202975
Fixes: 5946c4319e ("fs/locks: allow a lock request to block other requests.")
Cc: stable@vger.kernel.org
Reported-by: Andreas Schneider <asn@redhat.com>
Signed-off-by: Neil Brown <neilb@suse.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Alexei Starovoitov says:
====================
pull-request: bpf 2019-03-24
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) libbpf verision fix up from Daniel.
2) fix liveness propagation from Jakub.
3) fix verbose print of refcounted regs from Martin.
4) fix for large map allocations from Martynas.
5) fix use after free in sanitize_ptr_alu from Xu.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
First one is fixing version in Makefile and shared object and
second one clarifies bump in version. Thanks!
v1 -> v2:
- Fix up soname, thanks Stanislav!
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The current documentation suggests that we would need to bump the
libbpf version on every change. Lets clarify this a bit more and
reflect what we do today in practice, that is, bumping it once per
development cycle.
Fixes: 76d1b894c5 ("libbpf: Document API and ABI conventions")
Reported-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Even though libbpf's versioning script for the linker (libbpf.map)
is pointing to 0.0.2, the BPF_EXTRAVERSION in the Makefile has
not been updated along with it and is therefore still on 0.0.1.
While fixing up, I also noticed that the generated shared object
versioning information is missing, typical convention is to have
a linker name (libbpf.so), soname (libbpf.so.0) and real name
(libbpf.so.0.0.2) for library management. This is based upon the
LIBBPF_VERSION as well.
The build will then produce the following bpf libraries:
# ll libbpf*
libbpf.a
libbpf.so -> libbpf.so.0.0.2
libbpf.so.0 -> libbpf.so.0.0.2
libbpf.so.0.0.2
# readelf -d libbpf.so.0.0.2 | grep SONAME
0x000000000000000e (SONAME) Library soname: [libbpf.so.0]
And install them accordingly:
# rm -rf /tmp/bld; mkdir /tmp/bld; make -j$(nproc) O=/tmp/bld install
Auto-detecting system features:
... libelf: [ on ]
... bpf: [ on ]
CC /tmp/bld/libbpf.o
CC /tmp/bld/bpf.o
CC /tmp/bld/nlattr.o
CC /tmp/bld/btf.o
CC /tmp/bld/libbpf_errno.o
CC /tmp/bld/str_error.o
CC /tmp/bld/netlink.o
CC /tmp/bld/bpf_prog_linfo.o
CC /tmp/bld/libbpf_probes.o
CC /tmp/bld/xsk.o
LD /tmp/bld/libbpf-in.o
LINK /tmp/bld/libbpf.a
LINK /tmp/bld/libbpf.so.0.0.2
LINK /tmp/bld/test_libbpf
INSTALL /tmp/bld/libbpf.a
INSTALL /tmp/bld/libbpf.so.0.0.2
# ll /usr/local/lib64/libbpf.*
/usr/local/lib64/libbpf.a
/usr/local/lib64/libbpf.so -> libbpf.so.0.0.2
/usr/local/lib64/libbpf.so.0 -> libbpf.so.0.0.2
/usr/local/lib64/libbpf.so.0.0.2
Fixes: 1bf4b05810 ("tools: bpftool: add probes for eBPF program types")
Fixes: 1b76c13e4b ("bpf tools: Introduce 'bpf' library and add bpf feature check")
Reported-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull scheduler updates from Thomas Gleixner:
"Third more careful attempt for this set of fixes:
- Prevent a 32bit math overflow in the cpufreq code
- Fix a buffer overflow when scanning the cgroup2 cpu.max property
- A set of fixes for the NOHZ scheduler logic to prevent waking up
CPUs even if the capacity of the busy CPUs is sufficient along with
other tweaks optimizing the behaviour for asymmetric systems
(big/little)"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Skip LLC NOHZ logic for asymmetric systems
sched/fair: Tune down misfit NOHZ kicks
sched/fair: Comment some nohz_balancer_kick() kick conditions
sched/core: Fix buffer overflow in cgroup2 property cpu.max
sched/cpufreq: Fix 32-bit math overflow
Pull perf updates from Thomas Gleixner:
"A larger set of perf updates.
Not all of them are strictly fixes, but that's solely the tip
maintainers fault as they let the timely -rc1 pull request fall
through the cracks for various reasons including travel. So I'm
sending this nevertheless because rebasing and distangling fixes and
updates would be a mess and risky as well. As of tomorrow, a strict
fixes separation is happening again. Sorry for the slip-up.
Kernel:
- Handle RECORD_MMAP vs. RECORD_MMAP2 correctly so different
consumers of the mmap event get what they requested.
Tools:
- A larger set of updates to perf record/report/scripts vs. time
stamp handling
- More Python3 fixups
- A pile of memory leak plumbing
- perf BPF improvements and fixes
- Finalize the perf.data directory storage"
[ Note: the kernel part is strictly a fix, the updates are purely to
tooling - Linus ]
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits)
perf bpf: Show more BPF program info in print_bpf_prog_info()
perf bpf: Extract logic to create program names from perf_event__synthesize_one_bpf_prog()
perf tools: Save bpf_prog_info and BTF of new BPF programs
perf evlist: Introduce side band thread
perf annotate: Enable annotation of BPF programs
perf build: Check what binutils's 'disassembler()' signature to use
perf bpf: Process PERF_BPF_EVENT_PROG_LOAD for annotation
perf symbols: Introduce DSO_BINARY_TYPE__BPF_PROG_INFO
perf feature detection: Add -lopcodes to feature-libbfd
perf top: Add option --no-bpf-event
perf bpf: Save BTF information as headers to perf.data
perf bpf: Save BTF in a rbtree in perf_env
perf bpf: Save bpf_prog_info information as headers to perf.data
perf bpf: Save bpf_prog_info in a rbtree in perf_env
perf bpf: Make synthesize_bpf_events() receive perf_session pointer instead of perf_tool
perf bpf: Synthesize bpf events with bpf_program__get_prog_info_linear()
bpftool: use bpf_program__get_prog_info_linear() in prog.c:do_dump()
tools lib bpf: Introduce bpf_program__get_prog_info_linear()
perf record: Replace option --bpf-event with --no-bpf-event
perf tests: Fix a memory leak in test__perf_evsel__tp_sched_test()
...
Darrick J. Wong