This patch replaces all memcpy() calls with LZ4_memcpy() which calls
__builtin_memcpy() so the compiler can inline it.
LZ4 relies heavily on memcpy() with a constant size being inlined. In x86
and i386 pre-boot environments memcpy() cannot be inlined because memcpy()
doesn't get defined as __builtin_memcpy().
An equivalent patch has been applied upstream so that the next import
won't lose this change [1].
I've measured the kernel decompression speed using QEMU before and after
this patch for the x86_64 and i386 architectures. The speed-up is about
10x as shown below.
Code Arch Kernel Size Time Speed
v5.8 x86_64 11504832 B 148 ms 79 MB/s
patch x86_64 11503872 B 13 ms 885 MB/s
v5.8 i386 9621216 B 91 ms 106 MB/s
patch i386 9620224 B 10 ms 962 MB/s
I also measured the time to decompress the initramfs on x86_64, i386, and
arm. All three show the same decompression speed before and after, as
expected.
[1] https://github.com/lz4/lz4/pull/890
Signed-off-by: Nick Terrell <terrelln@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Yann Collet <yann.collet.73@gmail.com>
Cc: Gao Xiang <gaoxiang25@huawei.com>
Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Link: http://lkml.kernel.org/r/20200803194022.2966806-1-nickrterrell@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Preparatory work to allow S390 to switch over to the generic VDSO
implementation.
S390 requires that the VDSO data pointer is handed in to the counter
read function when time namespace support is enabled. Adding the pointer
is a NOOP for all other architectures because the compiler is supposed
to optimize that out when it is unused in the architecture specific
inline. The change also solved a similar problem for MIPS which
fortunately has time namespaces not yet enabled.
S390 needs to update clock related VDSO data independent of the
timekeeping updates. This was solved so far with yet another sequence
counter in the S390 implementation. A better solution is to utilize the
already existing VDSO sequence count for this. The core code now exposes
helper functions which allow to serialize against the timekeeper code
and against concurrent readers.
S390 needs extra data for their clock readout function. The initial
common VDSO data structure did not provide a way to add that. It now has
an embedded architecture specific struct embedded which defaults to an
empty struct.
Doing this now avoids tree dependencies and conflicts post rc1 and
allows all other architectures which work on generic VDSO support to
work from a common upstream base.
- A trivial comment fix.
-----BEGIN PGP SIGNATURE-----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=y8Z5
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timekeeping updates from Thomas Gleixner:
"A set of timekeeping/VDSO updates:
- Preparatory work to allow S390 to switch over to the generic VDSO
implementation.
S390 requires that the VDSO data pointer is handed in to the
counter read function when time namespace support is enabled.
Adding the pointer is a NOOP for all other architectures because
the compiler is supposed to optimize that out when it is unused in
the architecture specific inline. The change also solved a similar
problem for MIPS which fortunately has time namespaces not yet
enabled.
S390 needs to update clock related VDSO data independent of the
timekeeping updates. This was solved so far with yet another
sequence counter in the S390 implementation. A better solution is
to utilize the already existing VDSO sequence count for this. The
core code now exposes helper functions which allow to serialize
against the timekeeper code and against concurrent readers.
S390 needs extra data for their clock readout function. The initial
common VDSO data structure did not provide a way to add that. It
now has an embedded architecture specific struct embedded which
defaults to an empty struct.
Doing this now avoids tree dependencies and conflicts post rc1 and
allows all other architectures which work on generic VDSO support
to work from a common upstream base.
- A trivial comment fix"
* tag 'timers-urgent-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Delete repeated words in comments
lib/vdso: Allow to add architecture-specific vdso data
timekeeping/vsyscall: Provide vdso_update_begin/end()
vdso/treewide: Add vdso_data pointer argument to __arch_get_hw_counter()
Pull networking fixes from David Miller:
"Some merge window fallout, some longer term fixes:
1) Handle headroom properly in lapbether and x25_asy drivers, from
Xie He.
2) Fetch MAC address from correct r8152 device node, from Thierry
Reding.
3) In the sw kTLS path we should allow MSG_CMSG_COMPAT in sendmsg,
from Rouven Czerwinski.
4) Correct fdputs in socket layer, from Miaohe Lin.
5) Revert troublesome sockptr_t optimization, from Christoph Hellwig.
6) Fix TCP TFO key reading on big endian, from Jason Baron.
7) Missing CAP_NET_RAW check in nfc, from Qingyu Li.
8) Fix inet fastreuse optimization with tproxy sockets, from Tim
Froidcoeur.
9) Fix 64-bit divide in new SFC driver, from Edward Cree.
10) Add a tracepoint for prandom_u32 so that we can more easily
perform usage analysis. From Eric Dumazet.
11) Fix rwlock imbalance in AF_PACKET, from John Ogness"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (49 commits)
net: openvswitch: introduce common code for flushing flows
af_packet: TPACKET_V3: fix fill status rwlock imbalance
random32: add a tracepoint for prandom_u32()
Revert "ipv4: tunnel: fix compilation on ARCH=um"
net: accept an empty mask in /sys/class/net/*/queues/rx-*/rps_cpus
net: ethernet: stmmac: Disable hardware multicast filter
net: stmmac: dwmac1000: provide multicast filter fallback
ipv4: tunnel: fix compilation on ARCH=um
vsock: fix potential null pointer dereference in vsock_poll()
sfc: fix ef100 design-param checking
net: initialize fastreuse on inet_inherit_port
net: refactor bind_bucket fastreuse into helper
net: phy: marvell10g: fix null pointer dereference
net: Fix potential memory leak in proto_register()
net: qcom/emac: add missed clk_disable_unprepare in error path of emac_clks_phase1_init
ionic_lif: Use devm_kcalloc() in ionic_qcq_alloc()
net/nfc/rawsock.c: add CAP_NET_RAW check.
hinic: fix strncpy output truncated compile warnings
drivers/net/wan/x25_asy: Added needed_headroom and a skb->len check
net/tls: Fix kmap usage
...
There has been some heat around prandom_u32() lately, and some people
were wondering if there was a simple way to determine how often
it was used, before considering making it maybe 10 times more expensive.
This tracepoint exports the generated pseudo random value.
Tested:
perf list | grep prandom_u32
random:prandom_u32 [Tracepoint event]
perf record -a [-g] [-C1] -e random:prandom_u32 sleep 1
[ perf record: Woken up 0 times to write data ]
[ perf record: Captured and wrote 259.748 MB perf.data (924087 samples) ]
perf report --nochildren
...
97.67% ksoftirqd/1 [kernel.vmlinux] [k] prandom_u32
|
---prandom_u32
prandom_u32
|
|--48.86%--tcp_v4_syn_recv_sock
| tcp_check_req
| tcp_v4_rcv
| ...
--48.81%--tcp_conn_request
tcp_v4_conn_request
tcp_rcv_state_process
...
perf script
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There exists duplicated "the" in the help text of CONFIG_PANIC_TIMEOUT,
Remove it.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Xuefeng Li <lixuefeng@loongson.cn>
Link: http://lkml.kernel.org/r/1591103358-32087-2-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reset the member "test_fs" of the test configuration after a call of the
function "kfree_const" to a null pointer so that a double memory release
will not be performed.
Fixes: d9c6a72d6f ("kmod: add test driver to stress test the module loader")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: James Morris <jmorris@namei.org>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: J. Bruce Fields <bfields@fieldses.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Lars Ellenberg <lars.ellenberg@linbit.com>
Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Roopa Prabhu <roopa@cumulusnetworks.com>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Sergei Trofimovich <slyfox@gentoo.org>
Cc: Sergey Kvachonok <ravenexp@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tony Vroon <chainsaw@gentoo.org>
Cc: Christoph Hellwig <hch@infradead.org>
Link: http://lkml.kernel.org/r/20200610154923.27510-4-mcgrof@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The documentation of the kstrto*() functions describes kstrto*() as
"replacements" of the "obsolete" simple_strto*() functions. Both of these
terms are inaccurate: they're not replacements because they have different
behaviour, and the simple_strto*() are not obsolete because there are
cases where they have benefits over kstrto*().
Remove usage of the terms "replacement" and "obsolete" in reference to
simple_strto*(), and instead use the term "preferred over".
Fixes: 4c925d6031 ("kstrto*: add documentation")
Fixes: 885e68e8b7 ("kernel.h: update comment about simple_strto<foo>() functions")
Signed-off-by: Kars Mulder <kerneldev@karsmulder.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Eldad Zack <eldad@fogrefinery.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Mans Rullgard <mans@mansr.com>
Cc: Petr Mladek <pmladek@suse.com>
Link: http://lkml.kernel.org/r/29b9-5f234c80-13-4e3aa200@244003027
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The documentation of the kstrto*() functions reference the simple_strtoull
function by "used as a replacement for [the obsolete] simple_strtoull".
All these functions describes themselves as replacements for the function
simple_strtoull, even though a function like kstrtol() would be more aptly
described as a replacement of simple_strtol().
Fix these references by making the documentation of kstrto*() reference
the closest simple_strto*() equivalent available. The functions
kstrto[u]int() do not have direct simple_strto[u]int() equivalences, so
these are made to refer to simple_strto[u]l() instead.
Furthermore, add parentheses after function names, as is standard in
kernel documentation.
Fixes: 4c925d6031 ("kstrto*: add documentation")
Signed-off-by: Kars Mulder <kerneldev@karsmulder.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Eldad Zack <eldad@fogrefinery.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Mans Rullgard <mans@mansr.com>
Cc: Petr Mladek <pmladek@suse.com>
Link: http://lkml.kernel.org/r/1ee1-5f234c00-f3-165a6440@234394593
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Coly Li <colyli@suse.de> [crc64.c]
Link: http://lkml.kernel.org/r/20200726112154.16510-1-grandmaster@al2klimov.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since filp_open() returns an error pointer, we should use IS_ERR() to
check the return value and then return PTR_ERR() if failed to get the
actual return value instead of always -EINVAL.
E.g. without this patch:
[root@localhost loongson]# ls no_such_file
ls: cannot access no_such_file: No such file or directory
[root@localhost loongson]# modprobe test_lockup file_path=no_such_file lock_sb_umount time_secs=60 state=S
modprobe: ERROR: could not insert 'test_lockup': Invalid argument
[root@localhost loongson]# dmesg | tail -1
[ 126.100596] test_lockup: cannot find file_path
With this patch:
[root@localhost loongson]# ls no_such_file
ls: cannot access no_such_file: No such file or directory
[root@localhost loongson]# modprobe test_lockup file_path=no_such_file lock_sb_umount time_secs=60 state=S
modprobe: ERROR: could not insert 'test_lockup': Unknown symbol in module, or unknown parameter (see dmesg)
[root@localhost loongson]# dmesg | tail -1
[ 95.134362] test_lockup: failed to open no_such_file: -2
Fixes: aecd42df6d ("lib/test_lockup.c: add parameters for locking generic vfs locks")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Kees Cook <keescook@chromium.org>
Link: http://lkml.kernel.org/r/1595555407-29875-2-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since test_lockup is a test module to generate lockups, it is better to
limit TEST_LOCKUP to module (=m) or disabled (=n) because we can not use
the module parameters when CONFIG_TEST_LOCKUP=y.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Kees Cook <keescook@chromium.org>
Link: http://lkml.kernel.org/r/1595555407-29875-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix sparse build warning:
lib/test_lockup.c:403:1: warning:
symbol '__pcpu_scope_test_works' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200707112252.9047-1-weiyongjun1@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, the bitops test consists of two parts: one part is executed
during module load, the second part during module unload. This is
cumbersome for the user, as he has to perform two steps to execute all
tests, and is different from most (all?) other tests.
Merge the two parts, so both are executed during module load.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Link: http://lkml.kernel.org/r/20200706112900.7097-1-geert@linux-m68k.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Inspired by an original patch from Yury Norov: introduce a test for
bitmap_cut() that also makes sure functionality is as described for
partially overlapping src and dst.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Yury Norov <yury.norov@gmail.com>
Link: http://lkml.kernel.org/r/5fc45e6bbd4fa837cd9577f8a0c1d639df90a4ce.1592155364.git.sbrivio@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "lib: Fix bitmap_cut() for overlaps, add test"
This patch (of 2):
Yury Norov reports that bitmap_cut() will not produce the right outcome if
src and dst partially overlap, with src pointing at some location after
dst, because the memmove() affects src before we store the bits that we
need to keep, that is, the bits preceding the cut -- as long as we the
beginning of the cut is not aligned to a long.
Fix this by storing those bits before the memmove().
Note that this is just a theoretical concern so far, as the only user of
this function, pipapo_drop() from the nftables set back-end implemented in
net/netfilter/nft_set_pipapo.c, always supplies entirely overlapping src
and dst.
Fixes: 2092767168 ("bitmap: Introduce bitmap_cut(): cut bits and shift remaining")
Reported-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Link: http://lkml.kernel.org/r/cover.1592155364.git.sbrivio@redhat.com
Link: http://lkml.kernel.org/r/003e38d4428cd6091ef00b5b03354f1bd7d9091e.1592155364.git.sbrivio@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Recently 0day reported many strange performance changes (regression or
improvement), in which there was no obvious relation between the culprit
commit and the benchmark at the first look, and it causes people to doubt
the test itself is wrong.
Upon further check, many of these cases are caused by the change to the
alignment of kernel text or data, as whole text/data of kernel are linked
together, change in one domain may affect alignments of other domains.
gcc has an option '-falign-functions=n' to force text aligned, and with
that option enabled, some of those performance changes will be gone, like
[1][2][3].
Add this option so that developers and 0day can easily find performance
bump caused by text alignment change, as tracking these strange bump is
quite time consuming. Though it can't help in other cases like data
alignment changes like [4].
Following is some size data for v5.7 kernel built with a RHEL config used
in 0day:
text data bss dec filename
19738771 13292906 5554236 38585913 vmlinux.noalign
19758591 13297002 5529660 38585253 vmlinux.align32
Raw vmlinux size in bytes:
v5.7 v5.7+align32
253950832 254018000 +0.02%
Some benchmark data, most of them have no big change:
* hackbench: [ -1.8%, +0.5%]
* fsmark: [ -3.2%, +3.4%] # ext4/xfs/btrfs
* kbuild: [ -2.0%, +0.9%]
* will-it-scale: [ -0.5%, +1.8%] # mmap1/pagefault3
* netperf:
- TCP_CRR [+16.6%, +97.4%]
- TCP_RR [-18.5%, -1.8%]
- TCP_STREAM [ -1.1%, +1.9%]
[1] https://lore.kernel.org/lkml/20200114085637.GA29297@shao2-debian/
[2] https://lore.kernel.org/lkml/20200330011254.GA14393@feng-iot/
[3] https://lore.kernel.org/lkml/1d98d1f0-fe84-6df7-f5bd-f4cb2cdb7f45@intel.com/
[4] https://lore.kernel.org/lkml/20200205123216.GO12867@shao2-debian/
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Andi Kleen <andi.kleen@intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: http://lkml.kernel.org/r/1595475001-90945-1-git-send-email-feng.tang@intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- run the checker (e.g. sparse) after the compiler
- remove unneeded cc-option tests for old compiler flags
- fix tar-pkg to install dtbs
- introduce ccflags-remove-y and asflags-remove-y syntax
- allow to trace functions in sub-directories of lib/
- introduce hostprogs-always-y and userprogs-always-y syntax
- various Makefile cleanups
-----BEGIN PGP SIGNATURE-----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=bkNQ
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- run the checker (e.g. sparse) after the compiler
- remove unneeded cc-option tests for old compiler flags
- fix tar-pkg to install dtbs
- introduce ccflags-remove-y and asflags-remove-y syntax
- allow to trace functions in sub-directories of lib/
- introduce hostprogs-always-y and userprogs-always-y syntax
- various Makefile cleanups
* tag 'kbuild-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: stop filtering out $(GCC_PLUGINS_CFLAGS) from cc-option base
kbuild: include scripts/Makefile.* only when relevant CONFIG is enabled
kbuild: introduce hostprogs-always-y and userprogs-always-y
kbuild: sort hostprogs before passing it to ifneq
kbuild: move host .so build rules to scripts/gcc-plugins/Makefile
kbuild: Replace HTTP links with HTTPS ones
kbuild: trace functions in subdirectories of lib/
kbuild: introduce ccflags-remove-y and asflags-remove-y
kbuild: do not export LDFLAGS_vmlinux
kbuild: always create directories of targets
powerpc/boot: add DTB to 'targets'
kbuild: buildtar: add dtbs support
kbuild: remove cc-option test of -ffreestanding
kbuild: remove cc-option test of -fno-stack-protector
Revert "kbuild: Create directory for target DTB"
kbuild: run the checker after the compiler
ccflags-remove-$(CONFIG_FUNCTION_TRACER) += $(CC_FLAGS_FTRACE)
exists here in sub-directories of lib/ to keep the behavior of
commit 2464a609de ("ftrace: do not trace library functions").
Since that commit, not only the objects in lib/ but also the ones in
the sub-directories are excluded from ftrace (although the commit
description did not explicitly mention this).
However, most of library functions in sub-directories are not so hot.
Re-add them to ftrace.
Going forward, only the objects right under lib/ will be excluded.
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
CFLAGS_REMOVE_<file>.o filters out flags when compiling a particular
object, but there is no convenient way to do that for every object in
a directory.
Add ccflags-remove-y and asflags-remove-y to make it easily.
Use ccflags-remove-y to clean up some Makefiles.
The add/remove order works as follows:
[1] KBUILD_CFLAGS specifies compiler flags used globally
[2] ccflags-y adds compiler flags for all objects in the
current Makefile
[3] ccflags-remove-y removes compiler flags for all objects in the
current Makefile (New feature)
[4] CFLAGS_<file> adds compiler flags per file.
[5] CFLAGS_REMOVE_<file> removes compiler flags per file.
Having [3] before [4] allows us to remove flags from most (but not all)
objects in the current Makefile.
For example, kernel/trace/Makefile removes $(CC_FLAGS_FTRACE)
from all objects in the directory, then adds it back to
trace_selftest_dynamic.o and CFLAGS_trace_kprobe_selftest.o
The same applies to lib/livepatch/Makefile.
Please note ccflags-remove-y has no effect to the sub-directories.
In contrast, the previous notation got rid of compiler flags also from
all the sub-directories.
The following are not affected because they have no sub-directories:
arch/arm/boot/compressed/
arch/powerpc/xmon/
arch/sh/
kernel/trace/
However, lib/ has several sub-directories.
To keep the behavior, I added ccflags-remove-y to all Makefiles
in subdirectories of lib/, except the following:
lib/vdso/Makefile - Kbuild does not descend into this Makefile
lib/raid/test/Makefile - This is not used for the kernel build
I think commit 2464a609de ("ftrace: do not trace library functions")
excluded too much. In the next commit, I will remove ccflags-remove-y
from the sub-directories of lib/.
Suggested-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Brendan Higgins <brendanhiggins@google.com> (KUnit)
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Pull misc vfs updates from Al Viro:
"No common topic whatsoever in those, sorry"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: define inode flags using bit numbers
iov_iter: Move unnecessary inclusion of crypto/hash.h
dlmfs: clean up dlmfs_file_{read,write}() a bit
- The biggest news in that the tracing ring buffer can now time events that
interrupted other ring buffer events. Before this change, if an interrupt
came in while recording another event, and that interrupt also had an
event, those events would all have the same time stamp as the event it
interrupted. Now, with the new design, those events will have a unique time
stamp and rightfully display the time for those events that were recorded
while interrupting another event.
- Bootconfig how has an "override" operator that lets the users have a
default config, but then add options to override the default.
- A fix was made to properly filter function graph tracing to the ftrace
PIDs. This came in at the end of the -rc cycle, and needs to be backported.
- Several clean ups, performance updates, and minor fixes as well.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXy3GOBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qphsAP9ci1jtrC2+cMBMCNKb/AFpA/nDaKsD
hpsDzvD0YPOmCAEA9QbZset8wUNG49R4FexP7egQ8Ad2S6Oa5f60jWleDQY=
=lH+q
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- The biggest news in that the tracing ring buffer can now time events
that interrupted other ring buffer events.
Before this change, if an interrupt came in while recording another
event, and that interrupt also had an event, those events would all
have the same time stamp as the event it interrupted.
Now, with the new design, those events will have a unique time stamp
and rightfully display the time for those events that were recorded
while interrupting another event.
- Bootconfig how has an "override" operator that lets the users have a
default config, but then add options to override the default.
- A fix was made to properly filter function graph tracing to the
ftrace PIDs. This came in at the end of the -rc cycle, and needs to
be backported.
- Several clean ups, performance updates, and minor fixes as well.
* tag 'trace-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (39 commits)
tracing: Add trace_array_init_printk() to initialize instance trace_printk() buffers
kprobes: Fix compiler warning for !CONFIG_KPROBES_ON_FTRACE
tracing: Use trace_sched_process_free() instead of exit() for pid tracing
bootconfig: Fix to find the initargs correctly
Documentation: bootconfig: Add bootconfig override operator
tools/bootconfig: Add testcases for value override operator
lib/bootconfig: Add override operator support
kprobes: Remove show_registers() function prototype
tracing/uprobe: Remove dead code in trace_uprobe_register()
kprobes: Fix NULL pointer dereference at kprobe_ftrace_handler
ftrace: Fix ftrace_trace_task return value
tracepoint: Use __used attribute definitions from compiler_attributes.h
tracepoint: Mark __tracepoint_string's __used
trace : Have tracing buffer info use kvzalloc instead of kzalloc
tracing: Remove outdated comment in stack handling
ftrace: Do not let direct or IPMODIFY ftrace_ops be added to module and set trampolines
ftrace: Setup correct FTRACE_FL_REGS flags for module
tracing/hwlat: Honor the tracing_cpumask
tracing/hwlat: Drop the duplicate assignment in start_kthread()
tracing: Save one trace_event->type by using __TRACE_LAST_TYPE
...
Use OOB_TAG_OFF as access offset to land the access into the next granule.
Suggested-by: Walter Wu <walter-zh.wu@mediatek.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Elena Petrova <lenaptr@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Link: http://lkml.kernel.org/r/403b259f1de49a7a3694531c851ac28326a586a8.1596199677.git.andreyknvl@google.com
Link: http://lkml.kernel.org/r/3063ab1411e92bce36061a96e25b651212e70ba6.1596544734.git.andreyknvl@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We use tag-based KASAN, then KASAN unit tests don't detect out-of-bounds
memory access. They need to be fixed.
With tag-based KASAN, the state of each 16 aligned bytes of memory is
encoded in one shadow byte and the shadow value is tag of pointer, so
we need to read next shadow byte, the shadow value is not equal to tag
value of pointer, so that tag-based KASAN will detect out-of-bounds
memory access.
[walter-zh.wu@mediatek.com: use KASAN_SHADOW_SCALE_SIZE instead of 13]
Link: http://lkml.kernel.org/r/20200708132524.11688-1-walter-zh.wu@mediatek.com
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Walter Wu <walter-zh.wu@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Link: http://lkml.kernel.org/r/20200706115039.16750-1-walter-zh.wu@mediatek.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Turn 'KASAN' into a menuconfig, to avoid cluttering its parent menu with
the suboptions if enabled. Use 'if KASAN ... endif' instead of having to
'depend on KASAN' for each entry.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Walter Wu <walter-zh.wu@mediatek.com>
Link: http://lkml.kernel.org/r/20200629104157.3242503-1-elver@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
percpu_counter's accuracy is related to its batch size. For a
percpu_counter with a big batch, its deviation could be big, so when the
counter's batch is runtime changed to a smaller value for better accuracy,
there could also be requirment to reduce the big deviation.
So add a percpu-counter sync function to be run on each CPU.
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Andi Kleen <andi.kleen@intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Tim Chen <tim.c.chen@intel.com>
Link: http://lkml.kernel.org/r/1594389708-60781-4-git-send-email-feng.tang@intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The functionality in lib/ioremap.c deals with pagetables, vmalloc and
caches, so it naturally belongs to mm/ Moving it there will also allow
declaring p?d_alloc_track functions in an header file inside mm/ rather
than having those declarations in include/linux/mm.h
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Matthew Wilcox <willy@infradead.org>
Link: http://lkml.kernel.org/r/20200627143453.31835-8-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As said by Linus:
A symmetric naming is only helpful if it implies symmetries in use.
Otherwise it's actively misleading.
In "kzalloc()", the z is meaningful and an important part of what the
caller wants.
In "kzfree()", the z is actively detrimental, because maybe in the
future we really _might_ want to use that "memfill(0xdeadbeef)" or
something. The "zero" part of the interface isn't even _relevant_.
The main reason that kzfree() exists is to clear sensitive information
that should not be leaked to other future users of the same memory
objects.
Rename kzfree() to kfree_sensitive() to follow the example of the recently
added kvfree_sensitive() and make the intention of the API more explicit.
In addition, memzero_explicit() is used to clear the memory to make sure
that it won't get optimized away by the compiler.
The renaming is done by using the command sequence:
git grep -w --name-only kzfree |\
xargs sed -i 's/kzfree/kfree_sensitive/'
followed by some editing of the kfree_sensitive() kerneldoc and adding
a kzfree backward compatibility macro in slab.h.
[akpm@linux-foundation.org: fs/crypto/inline_crypt.c needs linux/slab.h]
[akpm@linux-foundation.org: fix fs/crypto/inline_crypt.c some more]
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Joe Perches <joe@perches.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: "Jason A . Donenfeld" <Jason@zx2c4.com>
Link: http://lkml.kernel.org/r/20200616154311.12314-3-longman@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=oQEB
-----END PGP SIGNATURE-----
Merge tag 'livepatching-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching updates from Petr Mladek:
"Improvements and cleanups of livepatching selftests"
* tag 'livepatching-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
selftests/livepatch: adopt to newer sysctl error format
selftests/livepatch: Use "comm" instead of "diff" for dmesg
selftests/livepatch: add test delimiter to dmesg
selftests/livepatch: refine dmesg 'taints' in dmesg comparison
selftests/livepatch: Don't clear dmesg when running tests
selftests/livepatch: fix mem leaks in test-klp-shadow-vars
selftests/livepatch: more verification in test-klp-shadow-vars
selftests/livepatch: rework test-klp-shadow-vars
selftests/livepatch: simplify test-klp-callbacks busy target tests
MIPS already uses and S390 will need the vdso data pointer in
__arch_get_hw_counter().
This works nicely as long as the architecture does not support time
namespaces in the VDSO. With time namespaces enabled the regular
accessor to the vdso data pointer __arch_get_vdso_data() will return the
namespace specific VDSO data page for tasks which are part of a
non-root time namespace. This would cause the architectures which need
the vdso data pointer in __arch_get_hw_counter() to access the wrong
vdso data page.
Add a vdso_data pointer argument to __arch_get_hw_counter() and hand it in
from the call sites in the core code. For architectures which do not need
the data pointer in their counter accessor function the compiler will just
optimize it out.
Fix up all existing architecture implementations and make MIPS utilize the
pointer instead of invoking the accessor function.
No functional change and no change in the resulting object code (except
MIPS).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/draft-87wo2ekuzn.fsf@nanos.tec.linutronix.de
Pull networking updates from David Miller:
1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan.
2) Support UDP segmentation in code TSO code, from Eric Dumazet.
3) Allow flashing different flash images in cxgb4 driver, from Vishal
Kulkarni.
4) Add drop frames counter and flow status to tc flower offloading,
from Po Liu.
5) Support n-tuple filters in cxgb4, from Vishal Kulkarni.
6) Various new indirect call avoidance, from Eric Dumazet and Brian
Vazquez.
7) Fix BPF verifier failures on 32-bit pointer arithmetic, from
Yonghong Song.
8) Support querying and setting hardware address of a port function via
devlink, use this in mlx5, from Parav Pandit.
9) Support hw ipsec offload on bonding slaves, from Jarod Wilson.
10) Switch qca8k driver over to phylink, from Jonathan McDowell.
11) In bpftool, show list of processes holding BPF FD references to
maps, programs, links, and btf objects. From Andrii Nakryiko.
12) Several conversions over to generic power management, from Vaibhav
Gupta.
13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry
Yakunin.
14) Various https url conversions, from Alexander A. Klimov.
15) Timestamping and PHC support for mscc PHY driver, from Antoine
Tenart.
16) Support bpf iterating over tcp and udp sockets, from Yonghong Song.
17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov.
18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan.
19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several
drivers. From Luc Van Oostenryck.
20) XDP support for xen-netfront, from Denis Kirjanov.
21) Support receive buffer autotuning in MPTCP, from Florian Westphal.
22) Support EF100 chip in sfc driver, from Edward Cree.
23) Add XDP support to mvpp2 driver, from Matteo Croce.
24) Support MPTCP in sock_diag, from Paolo Abeni.
25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic
infrastructure, from Jakub Kicinski.
26) Several pci_ --> dma_ API conversions, from Christophe JAILLET.
27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel.
28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki.
29) Refactor a lot of networking socket option handling code in order to
avoid set_fs() calls, from Christoph Hellwig.
30) Add rfc4884 support to icmp code, from Willem de Bruijn.
31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei.
32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin.
33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin.
34) Support TCP syncookies in MPTCP, from Flowian Westphal.
35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano
Brivio.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits)
net: thunderx: initialize VF's mailbox mutex before first usage
usb: hso: remove bogus check for EINPROGRESS
usb: hso: no complaint about kmalloc failure
hso: fix bailout in error case of probe
ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM
selftests/net: relax cpu affinity requirement in msg_zerocopy test
mptcp: be careful on subflow creation
selftests: rtnetlink: make kci_test_encap() return sub-test result
selftests: rtnetlink: correct the final return value for the test
net: dsa: sja1105: use detected device id instead of DT one on mismatch
tipc: set ub->ifindex for local ipv6 address
ipv6: add ipv6_dev_find()
net: openvswitch: silence suspicious RCU usage warning
Revert "vxlan: fix tos value before xmit"
ptp: only allow phase values lower than 1 period
farsync: switch from 'pci_' to 'dma_' API
wan: wanxl: switch from 'pci_' to 'dma_' API
hv_netvsc: do not use VF device if link is down
dpaa2-eth: Fix passing zero to 'PTR_ERR' warning
net: macb: Properly handle phylink on at91sam9x
...
This series adds reporting of the page table order from hmm_range_fault()
and some optimization of migrate_vma():
- Report the size of the page table mapping out of hmm_range_fault(). This
makes it easier to establish a large/huge/etc mapping in the device's
page table.
- Allow devices to ignore the invalidations during migration in cases
where the migration is not going to change pages. For instance migrating
pages to a device does not require the device to invalidate pages
already in the device.
- Update nouveau and hmm_tests to use the above
-----BEGIN PGP SIGNATURE-----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=omAU
-----END PGP SIGNATURE-----
Merge tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull hmm updates from Jason Gunthorpe:
"Ralph has been working on nouveau's use of hmm_range_fault() and
migrate_vma() which resulted in this small series. It adds reporting
of the page table order from hmm_range_fault() and some optimization
of migrate_vma():
- Report the size of the page table mapping out of hmm_range_fault().
This makes it easier to establish a large/huge/etc mapping in the
device's page table.
- Allow devices to ignore the invalidations during migration in cases
where the migration is not going to change pages.
For instance migrating pages to a device does not require the
device to invalidate pages already in the device.
- Update nouveau and hmm_tests to use the above"
* tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
mm/hmm/test: use the new migration invalidation
nouveau/svm: use the new migration invalidation
mm/notifier: add migration invalidation type
mm/migrate: add a flags parameter to migrate_vma
nouveau: fix storing invalid ptes
nouveau/hmm: support mapping large sysmem pages
nouveau: fix mapping 2MB sysmem pages
nouveau/hmm: fault one page at a time
mm/hmm: add tests for hmm_pfn_to_map_order()
mm/hmm: provide the page mapping order in hmm_range_fault()
Here is the "big" set of changes to the driver core, and some drivers
using the changes, for 5.9-rc1.
"Biggest" thing in here is the device link exposure in sysfs, to help
to tame the madness that is SoC device tree representations and driver
interactions with it.
Other stuff in here that is interesting is:
- device probe log helper so that drivers can report problems in
a unified way easier.
- devres functions added
- DEVICE_ATTR_ADMIN_* macro added to make it harder to write
incorrect sysfs file permissions
- documentation cleanups
- ability for debugfs to be present in the kernel, yet not
exposed to userspace. Needed for systems that want it
enabled, but do not trust users, so they can still use some
kernel functions that were otherwise disabled.
- other minor fixes and cleanups
The patches outside of drivers/base/ all have acks from the respective
subsystem maintainers to go through this tree instead of theirs.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXylhOQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylGdACeKqxm8IIDZycj0QjLUlPiEwVIROgAnjpf5jAB
mb4jMvgEGsB6/FwxypPG
=RUss
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the "big" set of changes to the driver core, and some drivers
using the changes, for 5.9-rc1.
"Biggest" thing in here is the device link exposure in sysfs, to help
to tame the madness that is SoC device tree representations and driver
interactions with it.
Other stuff in here that is interesting is:
- device probe log helper so that drivers can report problems in a
unified way easier.
- devres functions added
- DEVICE_ATTR_ADMIN_* macro added to make it harder to write
incorrect sysfs file permissions
- documentation cleanups
- ability for debugfs to be present in the kernel, yet not exposed to
userspace. Needed for systems that want it enabled, but do not
trust users, so they can still use some kernel functions that were
otherwise disabled.
- other minor fixes and cleanups
The patches outside of drivers/base/ all have acks from the respective
subsystem maintainers to go through this tree instead of theirs.
All of these have been in linux-next with no reported issues"
* tag 'driver-core-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (39 commits)
drm/bridge: lvds-codec: simplify error handling
drm/bridge/sii8620: fix resource acquisition error handling
driver core: add deferring probe reason to devices_deferred property
driver core: add device probe log helper
driver core: Avoid binding drivers to dead devices
Revert "test_firmware: Test platform fw loading on non-EFI systems"
firmware_loader: EFI firmware loader must handle pre-allocated buffer
selftest/firmware: Add selftest timeout in settings
test_firmware: Test platform fw loading on non-EFI systems
driver core: Change delimiter in devlink device's name to "--"
debugfs: Add access restriction option
tracefs: Remove unnecessary debug_fs checks.
driver core: Fix probe_count imbalance in really_probe()
kobject: remove unused KOBJ_MAX action
driver core: Fix sleeping in invalid context during device link deletion
driver core: Add waiting_for_supplier sysfs file for devices
driver core: Add state_synced sysfs file for devices that support it
driver core: Expose device link details in sysfs
driver core: Drop mention of obsolete bus rwsem from kernel-doc
debugfs: file: Remove unnecessary cast in kfree()
...
Here is the large set of char and misc and other driver subsystem
patches for 5.9-rc1. Lots of new driver submissions in here, and
cleanups and features for existing drivers.
Highlights are:
- habanalabs driver updates
- coresight driver updates
- nvmem driver updates
- huge number of "W=1" build warning cleanups from Lee Jones
- dyndbg updates
- virtbox driver fixes and updates
- soundwire driver updates
- mei driver updates
- phy driver updates
- fpga driver updates
- lots of smaller individual misc/char driver cleanups and fixes
Full details are in the shortlog.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXylccQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymofgCfZ1CxNWd0ZVM0YIn8cY9gO6ON7MsAnRq48hvn
Vjf4rKM73GC11bVF4Gyy
=Xq1R
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the large set of char and misc and other driver subsystem
patches for 5.9-rc1. Lots of new driver submissions in here, and
cleanups and features for existing drivers.
Highlights are:
- habanalabs driver updates
- coresight driver updates
- nvmem driver updates
- huge number of "W=1" build warning cleanups from Lee Jones
- dyndbg updates
- virtbox driver fixes and updates
- soundwire driver updates
- mei driver updates
- phy driver updates
- fpga driver updates
- lots of smaller individual misc/char driver cleanups and fixes
Full details are in the shortlog.
All of these have been in linux-next with no reported issues"
* tag 'char-misc-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (322 commits)
habanalabs: remove unused but set variable 'ctx_asid'
nvmem: qcom-spmi-sdam: Enable multiple devices
dt-bindings: nvmem: SID: add binding for A100's SID controller
nvmem: update Kconfig description
nvmem: qfprom: Add fuse blowing support
dt-bindings: nvmem: Add properties needed for blowing fuses
dt-bindings: nvmem: qfprom: Convert to yaml
nvmem: qfprom: use NVMEM_DEVID_AUTO for multiple instances
nvmem: core: add support to auto devid
nvmem: core: Add nvmem_cell_read_u8()
nvmem: core: Grammar fixes for help text
nvmem: sc27xx: add sc2730 efuse support
nvmem: Enforce nvmem stride in the sysfs interface
MAINTAINERS: Add git tree for NVMEM FRAMEWORK
nvmem: sprd: Fix return value of sprd_efuse_probe()
drivers: android: Fix the SPDX comment style
drivers: android: Fix a variable declaration coding style issue
drivers: android: Remove braces for a single statement if-else block
drivers: android: Remove the use of else after return
drivers: android: Fix a variable declaration coding style issue
...
This Kunit update for Linux 5.9-rc1 consists of:
- Adds a generic kunit_resource API extending it to support
resources that are passed in to kunit in addition kunit
allocated resources. In addition, KUnit resources are now
refcounted to avoid passed in resources being released while
in use by kunit.
- Add support for named resources.
- Important bug fixes from Brendan Higgins and Will Chen
-----BEGIN PGP SIGNATURE-----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=kIIk
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit updates from Shuah Khan:
- Add a generic kunit_resource API extending it to support resources
that are passed in to kunit in addition kunit allocated resources. In
addition, KUnit resources are now refcounted to avoid passed in
resources being released while in use by kunit.
- Add support for named resources.
- Important bug fixes from Brendan Higgins and Will Chen
* tag 'linux-kselftest-kunit-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: tool: fix improper treatment of file location
kunit: tool: fix broken default args in unit tests
kunit: capture stderr on all make subprocess calls
Documentation: kunit: Remove references to --defconfig
kunit: add support for named resources
kunit: generalize kunit_resource API beyond allocated resources
while to come. Changes include:
- Some new Chinese translations
- Progress on the battle against double words words and non-HTTPS URLs
- Some block-mq documentation
- More RST conversions from Mauro. At this point, that task is
essentially complete, so we shouldn't see this kind of churn again for a
while. Unless we decide to switch to asciidoc or something...:)
- Lots of typo fixes, warning fixes, and more.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl8oVkwPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YoW8H/jJ/xnXFn7tkgVPQAlL3k5HCnK7A5nDP9RVR
cg1pTx1cEFdjzxPlJyExU6/v+AImOvtweHXC+JDK7YcJ6XFUNYXJI3LxL5KwUXbY
BL/xRFszDSXH2C7SJF5GECcFYp01e/FWSLN3yWAh+g+XwsKiTJ8q9+CoIDkHfPGO
7oQsHKFu6s36Af0LfSgxk4sVB7EJbo8e4psuPsP5SUrl+oXRO43Put0rXkR4yJoH
9oOaB51Do5fZp8I4JVAqGXvpXoExyLMO4yw0mASm6YSZ3KyjR8Fae+HD9Cq4ZuwY
0uzb9K+9NEhqbfwtyBsi99S64/6Zo/MonwKwevZuhtsDTK4l4iU=
=JQLZ
-----END PGP SIGNATURE-----
Merge tag 'docs-5.9' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"It's been a busy cycle for documentation - hopefully the busiest for a
while to come. Changes include:
- Some new Chinese translations
- Progress on the battle against double words words and non-HTTPS
URLs
- Some block-mq documentation
- More RST conversions from Mauro. At this point, that task is
essentially complete, so we shouldn't see this kind of churn again
for a while. Unless we decide to switch to asciidoc or
something...:)
- Lots of typo fixes, warning fixes, and more"
* tag 'docs-5.9' of git://git.lwn.net/linux: (195 commits)
scripts/kernel-doc: optionally treat warnings as errors
docs: ia64: correct typo
mailmap: add entry for <alobakin@marvell.com>
doc/zh_CN: add cpu-load Chinese version
Documentation/admin-guide: tainted-kernels: fix spelling mistake
MAINTAINERS: adjust kprobes.rst entry to new location
devices.txt: document rfkill allocation
PCI: correct flag name
docs: filesystems: vfs: correct flag name
docs: filesystems: vfs: correct sync_mode flag names
docs: path-lookup: markup fixes for emphasis
docs: path-lookup: more markup fixes
docs: path-lookup: fix HTML entity mojibake
CREDITS: Replace HTTP links with HTTPS ones
docs: process: Add an example for creating a fixes tag
doc/zh_CN: add Chinese translation prefer section
doc/zh_CN: add clearing-warn-once Chinese version
doc/zh_CN: add admin-guide index
doc:it_IT: process: coding-style.rst: Correct __maybe_unused compiler label
futex: MAINTAINERS: Re-add selftests directory
...
-----BEGIN PGP SIGNATURE-----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=ZcMq
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Herbert Xu made printk header file self-contained.
- Andy Shevchenko and Sergey Senozhatsky cleaned up console->setup()
error handling.
- Andy Shevchenko did some cleanups (e.g. sparse warning) in vsprintf
code.
- Minor documentation updates.
* tag 'printk-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
lib/vsprintf: Force type of flags value for gfp_t
lib/vsprintf: Replace custom spec to print decimals with generic one
lib/vsprintf: Replace hidden BUILD_BUG_ON() with static_assert()
printk: Make linux/printk.h self-contained
doc:kmsg: explicitly state the return value in case of SEEK_CUR
Replace HTTP links with HTTPS ones: vsprintf
hvc: unify console setup naming
console: Fix trivia typo 'change' -> 'chance'
console: Propagate error code from console ->setup()
tty: hvc: Return proper error code from console ->setup() hook
serial: sunzilog: Return proper error code from console ->setup() hook
serial: sunsab: Return proper error code from console ->setup() hook
mips: Return proper error code from console ->setup() hook
* ASUS WMI driver honors BAT1 name of the battery
(quite a few new laptops are using it)
* Dell WMI driver supports new key codes and backlight events
* ThinkPad ACPI driver now may use standard charge threshold interface,
it also has been updated to provide Laptop or Desktop mode to the user
* Intel Speed Select Technology gained support on Sapphire Rapids platform
* Regular update of Speed Select Technology tools
* Mellanox has been updated to support complex attributes
* PMC core driver has been fixed to show correct names for LPM0 register
* HTTP links were replaced by HTTPS ones where it applies
* Miscellaneous fixes and cleanups here and there
The following is an automated git shortlog grouped by driver:
acerhdf:
- Replace HTTP links with HTTPS ones
Add new intel_atomisp2_led driver:
- Add new intel_atomisp2_led driver
apple-gmux:
- Replace HTTP links with HTTPS ones
asus-nb-wmi:
- Drop duplicate DMI quirk structures
- add support for ASUS ROG Zephyrus G14 and G15
asus-wmi:
- allow BAT1 battery name
dell-wmi:
- add new dmi mapping for keycode 0xffff
- add new keymap type 0x0012
- add new backlight events
intel_cht_int33fe:
- Drop double check for ACPI companion device
intel-hid:
- Fix return value check in check_acpi_dev()
intel_pmc_core:
- fix bound check in pmc_core_mphy_pg_show()
- update TGL's LPM0 reg bit map name
intel-vbtn:
- Fix return value check in check_acpi_dev()
ISST:
- drop a duplicated word in isst_if.h
- Add new PCI device ids
pcengines-apuv2:
- revert wiring up simswitch GPIO as LED
platform/mellanox:
- Introduce string_upper() and string_lower() helpers
- Add string_upper() and string_lower() tests
- Extend FAN platform data description
- Add more definitions for system attributes
- Add new attribute for mlxreg-io sysfs interfaces
- Add presence register field for FAN devices
- Add support for complex attributes
- mlxreg-io: Add support for complex attributes
- mlxreg-hotplug: Add environmental data to uevent
- mlxreg-hotplug: Use capability register for attribute creation
- mlxreg-hotplug: Modify module license
system76-acpi:
- Fix brightness_set schedule while atomic
thinkpad_acpi:
- Make some symbols static
- add documentation for battery charge control
- use standard charge control attribute names
- remove unused defines
- Replace HTTP links with HTTPS ones
- not loading brightness_init when _BCL invalid
- lap or desk mode interface
- Revert "Use strndup_user() in dispatch_proc_write()"
tools/power/x86/intel-speed-select:
- Update version for v5.9
- Add retries for mail box commands
- Add option to delay mbox commands
- Ignore -o option processing on error
- Change path for caching topology info
-----BEGIN PGP SIGNATURE-----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=yvnW
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.9-1' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver updates from Andy Shevchenko:
- ASUS WMI driver honors BAT1 name of the battery (quite a few new
laptops are using it)
- Dell WMI driver supports new key codes and backlight events
- ThinkPad ACPI driver now may use standard charge threshold interface,
it also has been updated to provide Laptop or Desktop mode to the
user
- Intel Speed Select Technology gained support on Sapphire Rapids
platform
- Regular update of Speed Select Technology tools
- Mellanox has been updated to support complex attributes
- PMC core driver has been fixed to show correct names for LPM0
register
- HTTP links were replaced by HTTPS ones where it applies
- Miscellaneous fixes and cleanups here and there
* tag 'platform-drivers-x86-v5.9-1' of git://git.infradead.org/linux-platform-drivers-x86: (42 commits)
platform/x86: asus-nb-wmi: Drop duplicate DMI quirk structures
platform/x86: thinkpad_acpi: Make some symbols static
platform/x86: thinkpad_acpi: add documentation for battery charge control
platform/x86: thinkpad_acpi: use standard charge control attribute names
platform/x86: thinkpad_acpi: remove unused defines
platform/x86: ISST: drop a duplicated word in isst_if.h
tools/power/x86/intel-speed-select: Update version for v5.9
tools/power/x86/intel-speed-select: Add retries for mail box commands
tools/power/x86/intel-speed-select: Add option to delay mbox commands
tools/power/x86/intel-speed-select: Ignore -o option processing on error
tools/power/x86/intel-speed-select: Change path for caching topology info
platform/x86: acerhdf: Replace HTTP links with HTTPS ones
platform/x86: apple-gmux: Replace HTTP links with HTTPS ones
platform/x86: pcengines-apuv2: revert wiring up simswitch GPIO as LED
platform/x86: mlx-platform: Extend FAN platform data description
platform_data/mlxreg: Add presence register field for FAN devices
Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
platform/mellanox: mlxreg-io: Add support for complex attributes
platform/x86: mlx-platform: Add more definitions for system attributes
platform_data/mlxreg: Add support for complex attributes
...
kernel and initrd images.
ZSTD has a very fast decompressor, yet it compresses better than gzip.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=bARW
-----END PGP SIGNATURE-----
Merge tag 'x86-boot-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot updates from Ingo Molnar:
"The main change in this cycle was to add support for ZSTD-compressed
kernel and initrd images.
ZSTD has a very fast decompressor, yet it compresses better than gzip"
* tag 'x86-boot-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation: dontdiff: Add zstd compressed files
.gitignore: Add ZSTD-compressed files
x86: Add support for ZSTD compressed kernel
x86: Bump ZO_z_extra_bytes margin for zstd
usr: Add support for zstd compressed initramfs
init: Add support for zstd compressed kernel
lib: Add zstd support to decompress
lib: Prepare zstd for preboot environment, improve performance
- Improve uclamp performance by using a static key for the fast path
- Add the "sched_util_clamp_min_rt_default" sysctl, to optimize for
better power efficiency of RT tasks on battery powered devices.
(The default is to maximize performance & reduce RT latencies.)
- Improve utime and stime tracking accuracy, which had a fixed boundary
of error, which created larger and larger relative errors as the values
become larger. This is now replaced with more precise arithmetics,
using the new mul_u64_u64_div_u64() helper in math64.h.
- Improve the deadline scheduler, such as making it capacity aware
- Improve frequency-invariant scheduling
- Misc cleanups in energy/power aware scheduling
- Add sched_update_nr_running tracepoint to track changes to nr_running
- Documentation additions and updates
- Misc cleanups and smaller fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=PbO7
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Improve uclamp performance by using a static key for the fast path
- Add the "sched_util_clamp_min_rt_default" sysctl, to optimize for
better power efficiency of RT tasks on battery powered devices.
(The default is to maximize performance & reduce RT latencies.)
- Improve utime and stime tracking accuracy, which had a fixed boundary
of error, which created larger and larger relative errors as the
values become larger. This is now replaced with more precise
arithmetics, using the new mul_u64_u64_div_u64() helper in math64.h.
- Improve the deadline scheduler, such as making it capacity aware
- Improve frequency-invariant scheduling
- Misc cleanups in energy/power aware scheduling
- Add sched_update_nr_running tracepoint to track changes to nr_running
- Documentation additions and updates
- Misc cleanups and smaller fixes
* tag 'sched-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
sched/doc: Factorize bits between sched-energy.rst & sched-capacity.rst
sched/doc: Document capacity aware scheduling
sched: Document arch_scale_*_capacity()
arm, arm64: Fix selection of CONFIG_SCHED_THERMAL_PRESSURE
Documentation/sysctl: Document uclamp sysctl knobs
sched/uclamp: Add a new sysctl to control RT default boost value
sched/uclamp: Fix a deadlock when enabling uclamp static key
sched: Remove duplicated tick_nohz_full_enabled() check
sched: Fix a typo in a comment
sched/uclamp: Remove unnecessary mutex_init()
arm, arm64: Select CONFIG_SCHED_THERMAL_PRESSURE
sched: Cleanup SCHED_THERMAL_PRESSURE kconfig entry
arch_topology, sched/core: Cleanup thermal pressure definition
trace/events/sched.h: fix duplicated word
linux/sched/mm.h: drop duplicated words in comments
smp: Fix a potential usage of stale nr_cpus
sched/fair: update_pick_idlest() Select group with lowest group_util when idle_cpus are equal
sched: nohz: stop passing around unused "ticks" parameter.
sched: Better document ttwu()
sched: Add a tracepoint to track rq->nr_running
...
- LKMM updates: mostly documentation changes, but also some new litmus tests for atomic ops.
- KCSAN updates: the most important change is that GCC 11 now has all fixes in place
to support KCSAN, so GCC support can be enabled again. Also more annotations.
- futex updates: minor cleanups and simplifications
- seqlock updates: merge preparatory changes/cleanups for the 'associated locks' facilities.
- lockdep updates:
- simplify IRQ trace event handling
- add various new debug checks
- simplify header dependencies, split out <linux/lockdep_types.h>, decouple
lockdep from other low level headers some more
- fix NMI handling
- misc cleanups and smaller fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=3MTT
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- LKMM updates: mostly documentation changes, but also some new litmus
tests for atomic ops.
- KCSAN updates: the most important change is that GCC 11 now has all
fixes in place to support KCSAN, so GCC support can be enabled again.
Also more annotations.
- futex updates: minor cleanups and simplifications
- seqlock updates: merge preparatory changes/cleanups for the
'associated locks' facilities.
- lockdep updates:
- simplify IRQ trace event handling
- add various new debug checks
- simplify header dependencies, split out <linux/lockdep_types.h>,
decouple lockdep from other low level headers some more
- fix NMI handling
- misc cleanups and smaller fixes
* tag 'locking-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
kcsan: Improve IRQ state trace reporting
lockdep: Refactor IRQ trace events fields into struct
seqlock: lockdep assert non-preemptibility on seqcount_t write
lockdep: Add preemption enabled/disabled assertion APIs
seqlock: Implement raw_seqcount_begin() in terms of raw_read_seqcount()
seqlock: Add kernel-doc for seqcount_t and seqlock_t APIs
seqlock: Reorder seqcount_t and seqlock_t API definitions
seqlock: seqcount_t latch: End read sections with read_seqcount_retry()
seqlock: Properly format kernel-doc code samples
Documentation: locking: Describe seqlock design and usage
locking/qspinlock: Do not include atomic.h from qspinlock_types.h
locking/atomic: Move ATOMIC_INIT into linux/types.h
lockdep: Move list.h inclusion into lockdep.h
locking/lockdep: Fix TRACE_IRQFLAGS vs. NMIs
futex: Remove unused or redundant includes
futex: Consistently use fshared as boolean
futex: Remove needless goto's
futex: Remove put_futex_key()
rwsem: fix commas in initialisation
docs: locking: Replace HTTP links with HTTPS ones
...
Add the value override operator (":=") support to the bootconfig.
This value override operator will be useful for the bootloaders
which will only update the existing bootconfig according to the
bootloader boot options.
Without this override operator, the bootloader needs to parse
the existing bootconfig and update it. However, with this
assignment, it can just append the updated (partial) bootconfig
text at the tail of existing one without parsing it.
(Of course, it must update the size, checksum and magic,
but that will be done easily)
Link: https://lkml.kernel.org/r/159482882954.126704.16209517125614438640.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-----BEGIN PGP SIGNATURE-----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=abJG
-----END PGP SIGNATURE-----
Merge tag 'for-5.9/block-20200802' of git://git.kernel.dk/linux-block
Pull core block updates from Jens Axboe:
"Good amount of cleanups and tech debt removals in here, and as a
result, the diffstat shows a nice net reduction in code.
- Softirq completion cleanups (Christoph)
- Stop using ->queuedata (Christoph)
- Cleanup bd claiming (Christoph)
- Use check_events, moving away from the legacy media change
(Christoph)
- Use inode i_blkbits consistently (Christoph)
- Remove old unused writeback congestion bits (Christoph)
- Cleanup/unify submission path (Christoph)
- Use bio_uninit consistently, instead of bio_disassociate_blkg
(Christoph)
- sbitmap cleared bits handling (John)
- Request merging blktrace event addition (Jan)
- sysfs add/remove race fixes (Luis)
- blk-mq tag fixes/optimizations (Ming)
- Duplicate words in comments (Randy)
- Flush deferral cleanup (Yufen)
- IO context locking/retry fixes (John)
- struct_size() usage (Gustavo)
- blk-iocost fixes (Chengming)
- blk-cgroup IO stats fixes (Boris)
- Various little fixes"
* tag 'for-5.9/block-20200802' of git://git.kernel.dk/linux-block: (135 commits)
block: blk-timeout: delete duplicated word
block: blk-mq-sched: delete duplicated word
block: blk-mq: delete duplicated word
block: genhd: delete duplicated words
block: elevator: delete duplicated word and fix typos
block: bio: delete duplicated words
block: bfq-iosched: fix duplicated word
iocost_monitor: start from the oldest usage index
iocost: Fix check condition of iocg abs_vdebt
block: Remove callback typedefs for blk_mq_ops
block: Use non _rcu version of list functions for tag_set_list
blk-cgroup: show global disk stats in root cgroup io.stat
blk-cgroup: make iostat functions visible to stat printing
block: improve discard bio alignment in __blkdev_issue_discard()
block: change REQ_OP_ZONE_RESET and REQ_OP_ZONE_RESET_ALL to be odd numbers
block: defer flush request no matter whether we have elevator
block: make blk_timeout_init() static
block: remove retry loop in ioc_release_fn()
block: remove unnecessary ioc nested locking
block: integrate bd_start_claiming into __blkdev_get
...
Pull crypto updates from Herbert Xu:
"API:
- Add support for allocating transforms on a specific NUMA Node
- Introduce the flag CRYPTO_ALG_ALLOCATES_MEMORY for storage users
Algorithms:
- Drop PMULL based ghash on arm64
- Fixes for building with clang on x86
- Add sha256 helper that does the digest in one go
- Add SP800-56A rev 3 validation checks to dh
Drivers:
- Permit users to specify NUMA node in hisilicon/zip
- Add support for i.MX6 in imx-rngc
- Add sa2ul crypto driver
- Add BA431 hwrng driver
- Add Ingenic JZ4780 and X1000 hwrng driver
- Spread IRQ affinity in inside-secure and marvell/cesa"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (157 commits)
crypto: sa2ul - Fix inconsistent IS_ERR and PTR_ERR
hwrng: core - remove redundant initialization of variable ret
crypto: x86/curve25519 - Remove unused carry variables
crypto: ingenic - Add hardware RNG for Ingenic JZ4780 and X1000
dt-bindings: RNG: Add Ingenic RNG bindings.
crypto: caam/qi2 - add module alias
crypto: caam - add more RNG hw error codes
crypto: caam/jr - remove incorrect reference to caam_jr_register()
crypto: caam - silence .setkey in case of bad key length
crypto: caam/qi2 - create ahash shared descriptors only once
crypto: caam/qi2 - fix error reporting for caam_hash_alloc
crypto: caam - remove deadcode on 32-bit platforms
crypto: ccp - use generic power management
crypto: xts - Replace memcpy() invocation with simple assignment
crypto: marvell/cesa - irq balance
crypto: inside-secure - irq balance
crypto: ecc - SP800-56A rev 3 local public key validation
crypto: dh - SP800-56A rev 3 local public key validation
crypto: dh - check validity of Z before export
lib/mpi: Add mpi_sub_ui()
...
Nick Terrell