Commit Graph

33 Commits

Author SHA1 Message Date
Theodore Kilgore 9d3103d061 V4L/DVB: gspca_mr97310a: add support for the Sakar 1638x CyberPix
This camera has a sensor type we did not support sofar, this patch adds
support for the new sensor type found in the Sakar 1638x CyberPix.

Signed-off-by: Theodore Kilgore <kilgota@banach.math.auburn.edu>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26 15:11:09 -03:00
Theodore Kilgore c260fe936d V4L/DVB: gspca_mr97310a: Simplify sensor detection
Simplify sensor detection a bit (share more of the code between cif and vga
cameras). Also remove an unnecessary write from zero_the_pointer().

Signed-off-by: Theodore Kilgore <kilgota@banach.math.auburn.edu>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26 15:11:07 -03:00
Theodore Kilgore 70136081fc V4L/DVB (13991): gspca_mr973010a: Fix cif type 1 cameras not streaming on UHCI controllers
If you read the mail to Oliver Neukum on the linux-usb list, then you know
that I found a cure for the mysterious problem that the MR97310a CIF "type
1" cameras have been freezing up and refusing to stream if hooked up to a
machine with a UHCI controller.

Namely, the cure is that if the camera is an mr97310a CIF type 1 camera, you
have to send it 0xa0, 0x00. Somehow, this is a timing reset command, or
such. It un-blocks whatever was previously stopping the CIF type 1 cameras
from working on the UHCI-based machines.

Signed-off-by: Theodore Kilgore <kilgota@auburn.edu>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26 15:10:38 -03:00
Marton Nemeth 7e64dc4c4d V4L/DVB (13899): gspca - all subdrivers: Make control descriptors constant.
The ctrls field of struct sd_desc is declared as const
in gspca.h. It is worth to initialize the content also with
constant values.

Signed-off-by: Marton Nemeth <nm127@freemail.hu>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26 15:10:29 -03:00
Jean-Francois Moine 8395555666 V4L/DVB (13626): gspca - many subdrivers: Fix some warnings.
- gl860.c:332:15: warning: cast to restricted __le16
- gl860.c:333:15: warning: cast to restricted __le16
- gl860-mi1320.c:348:5: warning: symbol 'mi1320_camera_settings' was not declared. Should it be static?
- gl860-mi2020.c:772:5: warning: symbol 'mi2020_camera_settings' was not declared. Should it be static?
- m5602_ov9650.c:444:7: warning: symbol 'data' shadows an earlier one
- m5602_core.c:84:5: warning: symbol 'm5602_wait_for_i2c' was not declared. Should it be static?
- m5602_core.c:391:6: warning: symbol 'm5602_disconnect' was not declared. Should it be static?
- m5602_s5k4aa.c:530:23: warning: dubious: x | !y
- m5602_s5k4aa.c:575:23: warning: dubious: x | !y
- gspca.c:1196:13: warning: potentially expensive pointer subtraction
- mr97310a.c:70:5: warning: symbol 'force_sensor_type' was not declared. Should it be static?
- ov519.c:2025:4: warning: do-while statement is not a compound statement
- ov519.c:2063:4: warning: do-while statement is not a compound statement
- ov519.c:2089:4: warning: do-while statement is not a compound statement
- ov519.c:1985:34: warning: incorrect type in assignment (different base types)
- sn9c20x.c:1164:5: warning: symbol 'i2c_r1' was not declared. Should it be static?
- sn9c20x.c:1189:5: warning: symbol 'i2c_r2' was not declared. Should it be static?
- sn9c20x.c:2237:27: warning: right shift by bigger than source value
- sn9c20x.c:2237:27: warning: right shift by bigger than source value

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16 00:18:49 -02:00
Jean-Francois Moine 76dd272b56 V4L/DVB (13453): gspca - all subdrivers: Remove the unused frame ptr from pkt_scan().
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:59 -02:00
Marton Nemeth a6b69e409a V4L/DVB (13298): gspca - pac207/pac7311/mr97310a: Simplify pac_find_sof.
Remove struct sd dependency from pac_find_sof() function implementation.
This step prepares separation of pac7302 and pac7311 specific parts of
struct sd.

Signed-off-by: Marton Nemeth <nm127@freemail.hu>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:15 -02:00
Theodore Kilgore 542821d8d0 V4L/DVB (13267): gspca_mr97310a: Change brightness for VGA type 1 cameras downward
gspca_mr97310a: Change brightness for VGA type 1 cameras downward

Signed-off-by: Theodore Kilgore <kilgota@banach.math.auburn.edu>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:10 -02:00
Theodore Kilgore b4b84deede V4L/DVB (13266): gspca_mr97310a: Fix / update some comments
gspca_mr97310a: Fix / update some comments

Signed-off-by: Theodore Kilgore <kilgota@banach.math.auburn.edu>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:10 -02:00
Theodore Kilgore b31210d737 V4L/DVB (13265): gspca_mr97310a: Partly back off red gain change for Sakar Digital VGA camera
gspca_mr97310a: Partly back off red gain change for Sakar Digital VGA camera

Signed-off-by: Theodore Kilgore <kilgota@banach.math.auburn.edu>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:09 -02:00
Theodore Kilgore 64f4d9a367 V4L/DVB (13245): gspca_mr97310a: Change blue gain setting for Sakar Digital VGA camera
gspca_mr97310a: Change blue gain setting for Sakar Digital VGA camera

Signed-off-by: Theodore Kilgore <kilgota@banach.math.auburn.edu>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:06 -02:00
Theodore Kilgore 1160a3818e V4L/DVB (13244): gspca_mr97310a: Fix / update some comments
gspca_mr97310a: Fix / update some comments

Signed-off-by: Theodore Kilgore <kilgota@banach.math.auburn.edu>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:05 -02:00
Aurelien Jacobs 8ac246cb8f V4L/DVB (13243): gscpa_mr97310a: Add Trust Spyc@m 100 USB ID
gscpa_mr97310a: Add Trust Spyc@m 100 USB ID

Signed-off-by: Aurelien Jacobs <aurel@gnuage.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:05 -02:00
Hans de Goede 065b6f7a34 V4L/DVB (13242): gspca_mr97310a: Add minimum clock divider control
When "shooting" certain (quite rare) scenes, the mr97310's compression is not
effective and it cannot keep up with the data stream. This patch adds a
minimum clock divider control, which influences the maximum framerate,
libv4l will automatically increase this minimum clockdiv control when it
detect the cam cannot keep up.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:04 -02:00
Hans de Goede d76f975c57 V4L/DVB (13142): gspca_mr97310a: small tweak to CIF sensor type 1 exposure setting
The CIF sensor type 1 exposure setting got clamped at 300, as settings below
300 do not work well (and do work for the other sensors). This patch
scales the 0-4095 range to 300-4095 instead of ignoring changes between
300, avoiding have a part of the control range where nothing happens.

This is esp. important for software autogain as done by libv4l.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:40:32 -02:00
Theodore Kilgore b3e440eef8 V4L/DVB (13139): gspca_mr97310a: Improve VGA sensor type detection
Improve (and also simplify :) gspca_mr97310a: VGA sensor type detection.
As it was still failing on some machines (not with some cams, but on
some machines interesting enough).

Signed-off-by: Theodore Kilgore <kilgota@banach.math.auburn.edu>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:40:30 -02:00
Theodore Kilgore 930bf78c20 V4L/DVB (13137): gspca_mr97310a: Add controls for vga cams with sensor type 0
This patch adds controls for vga cams with sensor type 0, in order to
correctly report the present controls, the probing of the sensor type
has been moved from sd_start to sd_config, since this made the sensor
type probing unreliable the detection method was changed.

Note this requires the camera to enter streaming mode, so sd_config now
briefly makes the camera stream.

Signed-off-by: Theodore Kilgore <kilgota@banach.math.auburn.edu>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:40:30 -02:00
Theodore Kilgore 32345b0596 V4L/DVB (13264): gspca_mr97310a: Change vstart for CIF sensor type 1 cams
gspca_mr97310a: Change vstart for CIF sensor type 1 cams

This fixes the distortion at the end of the frame, and avoids the bad frame
dropping done because of this distortion, trippling the framerate!

Signed-off-by: Theodore Kilgore <kilgota@banach.math.auburn.edu>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-11-07 12:55:12 -02:00
Hans de Goede f9089b0f9e V4L/DVB (12627): gspca_mr97310a: Add one more vivitar mini cam to the list of CIF cams
gspca_mr97310a: Add one more vivitar mini cam to the list of CIF cams

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12 12:20:02 -03:00
Hans de Goede 780287061b V4L/DVB (12626): gspca_mr97310a: Allow overriding of detected sensor type
gspca_mr97310a: Allow overriding of detected sensor type

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12 12:20:00 -03:00
Hans de Goede 823902defe V4L/DVB (12624): gspca_mr97310a: Use correct register for CIF type 1 sensor gain settings
gspca_mr97310a: Use correct register for CIF type 1 sensor gain settings

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12 12:19:59 -03:00
Hans de Goede a2e081b64e V4L/DVB (12623): gspca_mr97310a: Add controls for CIF type 0 sensor cams
gspca_mr97310a: Add controls for CIF type 0 sensor cams

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12 12:19:58 -03:00
Hans de Goede 5494378911 V4L/DVB (12622): gspca_mr97310a: make the probing a bit less chatty
gspca_mr97310a: make the probing a bit less chatty

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12 12:19:58 -03:00
Hans de Goede 5f5e26b1e6 V4L/DVB (12621): gspca_mr97310a: Move detection of CIF sensor type to probe() function
gspca_mr97310a: Move detection of CIF sensor type to probe() function,
so that the right controls are set to disabled from the start, rather then
having them disappear all of a sudden when the stream is started.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12 12:19:57 -03:00
Hans de Goede 9ac6978a10 V4L/DVB (12620): gspca_mr97310a: cleanup/fixup control handling
gspca_mr97310a: cleanup/fixup control handling

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12 12:19:55 -03:00
Hans de Goede 58d0b2f66e V4L/DVB (12619): gspca: mr97310a fix detection of sensortype for vivicam with id byte of 0x53
gspca: mr97310a fix detection of sensortype for vivicam with id byte of 0x53

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12 12:19:54 -03:00
Theodore Kilgore 89f0863c42 V4L/DVB (12618): gspca: mr97310a add support for CIF and more VGA camera's
This patch adds supports for mr97310a camera's with CIF sensors (2 different
types) and for VGA mr97310a camera with a different sensor then supported
until now.

This patch also add support for controls for one of the 2 CIF sensors, this
was written by Thomas Kaiser <thomas@kaiser-linux.li>

Signed-off-by: Theodore Kilgore <kilgota@auburn.edu>
Signed-off-by: Thomas Kaiser <thomas@kaiser-linux.li>
Signed-off-by: Hans de Goede <hdgoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12 12:19:54 -03:00
Theodore Kilgore ebf58f70e8 V4L/DVB (11483): gspca - mr97310a: Webcam 093a:010f added.
Signed-off-by: Theodore Kilgore <kilgota@auburn.edu>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:30 -03:00
Alexey Klimov 5d3fa30ddc V4L/DVB (11447): gspca - mr97310a: Return good error code in mod_init.
Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:23 -03:00
Theodore Kilgore 9832d765f8 V4L/DVB (10986): mr97310a: don't discard frame headers on stream output
Fix a bug where all frame headers were being discarded, instead of being part of the
stream output, on MR97310A cameras.

The frame headers contain information which may be useful in processing
the video output and therefore should be kept and not discarded.

A corresponding patch to the decompression algorithm in
libv4lconvert/mr97310a.c corrects the change in frame offset.

Signed-off-by: Theodore Kilgore <kilgota@auburn.edu>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:20 -03:00
Jean-Francois Moine 92e8c91bd2 V4L/DVB (10618): gspca - some drivers: Fix compilation warnings.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:48 -03:00
Kyle Guinn ceb35beaed V4L/DVB (10369): gspca - mr97310a: Fix camera initialization copy/paste bugs.
Signed-off-by: Kyle Guinn <elyk03@gmail.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:32 -03:00
Kyle Guinn d661e62205 V4L/DVB (10366): gspca - mr97310a: New subdriver.
This patch adds support for USB webcams based on the MR97310A chip. It was
tested with an Aiptek PenCam VGA+ webcam.

Signed-off-by: Kyle Guinn <elyk03@gmail.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:32 -03:00