Commit Graph

2461 Commits

Author SHA1 Message Date
Linus Torvalds 58d4ea65b9 Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6:
  mmc_spi: Fix unterminated of_match_table
  of/sparc: fix build regression from of_device changes
  of/device: Replace struct of_device with struct platform_device
2010-08-12 09:11:31 -07:00
Steve Wise 93fb72e443 RDMA/cxgb4: Obtain RDMA QID ranges from LLD/FW
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-07 23:08:47 -07:00
Linus Torvalds 3cc08fc35d Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (42 commits)
  IB/qib: Add missing <linux/slab.h> include
  IB/ehca: Drop unnecessary NULL test
  RDMA/nes: Fix confusing if statement indentation
  IB/ehca: Init irq tasklet before irq can happen
  RDMA/nes: Fix misindented code
  RDMA/nes: Fix showing wqm_quanta
  RDMA/nes: Get rid of "set but not used" variables
  RDMA/nes: Read firmware version from correct place
  IB/srp: Export req_lim via sysfs
  IB/srp: Make receive buffer handling more robust
  IB/srp: Use print_hex_dump()
  IB: Rename RAW_ETY to RAW_ETHERTYPE
  RDMA/nes: Fix two sparse warnings
  RDMA/cxgb3: Make needlessly global iwch_l2t_send() static
  IB/iser: Make needlessly global iser_alloc_rx_descriptors() static
  RDMA/cxgb4: Add timeouts when waiting for FW responses
  IB/qib: Fix race between qib_error_qp() and receive packet processing
  IB/qib: Limit the number of packets processed per interrupt
  IB/qib: Allow writes to the diag_counters to be able to clear them
  IB/qib: Set cfgctxts to number of CPUs by default
  ...
2010-08-07 17:08:02 -07:00
Grant Likely 2dc1158137 of/device: Replace struct of_device with struct platform_device
of_device is just an alias for platform_device, so remove it entirely.  Also
replace to_of_device() with to_platform_device() and update comment blocks.

This patch was initially generated from the following semantic patch, and then
edited by hand to pick up the bits that coccinelle didn't catch.

@@
@@
-struct of_device
+struct platform_device

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Reviewed-by: David S. Miller <davem@davemloft.net>
2010-08-06 09:25:50 -06:00
Roland Dreier 03b37ecdb3 Merge branches 'cxgb3', 'cxgb4', 'ehca', 'ipath', 'misc', 'nes', 'qib' and 'srp' into for-next 2010-08-05 14:27:14 -07:00
David Miller ba818afdc6 IB/qib: Add missing <linux/slab.h> include
Fix build failure on sparc64 which is missing the include of
<linux/slab.h> via <asm/pci.h> that x86, powerpc, ia64, etc. have.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-05 14:26:58 -07:00
Julia Lawall 2db0032181 IB/ehca: Drop unnecessary NULL test
list_for_each_entry binds its first argument to a non-null value, and thus
any null test on the value of that argument is superfluous.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
iterator I;
expression x;
statement S,S1,S2;
@@

I(x,...) { <...
- if (x == NULL && ...) S
  ...> }
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Alexander Schmidt <alexs@linux.vnet.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-05 14:24:55 -07:00
Roland Dreier 817979ac45 RDMA/nes: Fix confusing if statement indentation
Fix confusing indentation that makes a statement look as if it's part of
an if statement when in fact it isn't.

Reported-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-05 14:21:31 -07:00
Alexander Schmidt bd5d0ccbef IB/ehca: Init irq tasklet before irq can happen
Initialize tasklet before interrupts are requested to prevent
scheduling of an uninitialized tasklet.

Signed-off-by: Alexander Schmidt <alexs@linux.vnet.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-04 16:14:33 -07:00
Linus Torvalds 3cfc2c42c1 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (48 commits)
  Documentation: update broken web addresses.
  fix comment typo "choosed" -> "chosen"
  hostap:hostap_hw.c Fix typo in comment
  Fix spelling contorller -> controller in comments
  Kconfig.debug: FAIL_IO_TIMEOUT: typo Faul -> Fault
  fs/Kconfig: Fix typo Userpace -> Userspace
  Removing dead MACH_U300_BS26
  drivers/infiniband: Remove unnecessary casts of private_data
  fs/ocfs2: Remove unnecessary casts of private_data
  libfc: use ARRAY_SIZE
  scsi: bfa: use ARRAY_SIZE
  drm: i915: use ARRAY_SIZE
  drm: drm_edid: use ARRAY_SIZE
  synclink: use ARRAY_SIZE
  block: cciss: use ARRAY_SIZE
  comment typo fixes: charater => character
  fix comment typos concerning "challenge"
  arm: plat-spear: fix typo in kerneldoc
  reiserfs: typo comment fix
  update email address
  ...
2010-08-04 15:31:02 -07:00
Roland Dreier b2a899eaf3 RDMA/nes: Fix misindented code
In nes_probe(), a bit of code is indented one tab stop too far.  Fix this.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-04 14:29:31 -07:00
Roland Dreier df924f833c RDMA/nes: Fix showing wqm_quanta
In nes_show_wqm_quanta(), the wrong value is printed.  Fix this.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-04 14:27:01 -07:00
Roland Dreier 69d5102383 RDMA/nes: Get rid of "set but not used" variables
Delete dead code in various places that is shown by gcc 4.6's new
-Wunused-but-set-variable warnings.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-04 14:25:40 -07:00
Miroslaw Walukiewicz ff0380ce39 RDMA/nes: Read firmware version from correct place
Signed-off-by: Mirek Walukiewicz <miroslaw.walukiewicz@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-04 13:22:28 -07:00
Bart Van Assche 89de74866b IB/srp: Export req_lim via sysfs
Export req_lim via sysfs for debugging.

Signed-off-by: Bart Van Assche <bart.vanassche@gmail.com>
Acked-by: David Dillow <dave@thedillows.org>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-04 13:02:26 -07:00
Linus Torvalds 6ba74014c1 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1443 commits)
  phy/marvell: add 88ec048 support
  igb: Program MDICNFG register prior to PHY init
  e1000e: correct MAC-PHY interconnect register offset for 82579
  hso: Add new product ID
  can: Add driver for esd CAN-USB/2 device
  l2tp: fix export of header file for userspace
  can-raw: Fix skb_orphan_try handling
  Revert "net: remove zap_completion_queue"
  net: cleanup inclusion
  phy/marvell: add 88e1121 interface mode support
  u32: negative offset fix
  net: Fix a typo from "dev" to "ndev"
  igb: Use irq_synchronize per vector when using MSI-X
  ixgbevf: fix null pointer dereference due to filter being set for VLAN 0
  e1000e: Fix irq_synchronize in MSI-X case
  e1000e: register pm_qos request on hardware activation
  ip_fragment: fix subtracting PPPOE_SES_HLEN from mtu twice
  net: Add getsockopt support for TCP thin-streams
  cxgb4: update driver version
  cxgb4: add new PCI IDs
  ...

Manually fix up conflicts in:
 - drivers/net/e1000e/netdev.c: due to pm_qos registration
   infrastructure changes
 - drivers/net/phy/marvell.c: conflict between adding 88ec048 support
   and cleaning up the IDs
 - drivers/net/wireless/ipw2x00/ipw2100.c: trivial ipw2100_pm_qos_req
   conflict (registration change vs marking it static)
2010-08-04 11:47:58 -07:00
Bart Van Assche c996bb47bb IB/srp: Make receive buffer handling more robust
The current strategy in ib_srp for posting receive buffers is:

 * Post one buffer after channel establishment.
 * Post one buffer before sending an SRP_CMD or SRP_TSK_MGMT to the target.

As a result, only the first non-SRP_RSP information unit from the
target will be processed.  If that first information unit is an
SRP_T_LOGOUT, it will be processed.  On the other hand, if the
initiator receives an SRP_CRED_REQ or SRP_AER_REQ before it receives a
SRP_T_LOGOUT, the SRP_T_LOGOUT won't be processed.

We can fix this inconsistency by changing the strategy for posting
receive buffers to:

 * Post all receive buffers after channel establishment.
 * After a receive buffer has been consumed and processed, post it again.

A side effect is that the ib_post_recv() call is moved out of the SCSI
command processing path.  Since __srp_post_recv() is not called
directly any more, get rid of it and move the code directly into
srp_post_recv().  Also, move srp_post_recv() up in the file to avoid a
forward declaration.

Signed-off-by: Bart Van Assche <bart.vanassche@gmail.com>
Acked-by: David Dillow <dave@thedillows.org>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-04 11:47:39 -07:00
Bart Van Assche 7a7008110b IB/srp: Use print_hex_dump()
Replace an open-coded dump of the receive buffer with a call to
print_hex_dump().

Signed-off-by: Bart Van Assche <bart.vanassche@gmail.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-04 11:24:12 -07:00
Aleksey Senin a2ebf07ae5 IB: Rename RAW_ETY to RAW_ETHERTYPE
Change abbreviated IB_QPT_RAW_ETY to IB_QPT_RAW_ETHERTYPE to make
the special QP type easier to understand.

cf http://www.mail-archive.com/linux-rdma@vger.kernel.org/msg04530.html

Signed-off-by: Aleksey Senin <alekseys@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-04 10:44:19 -07:00
Or Gerlitz 812d867221 RDMA/nes: Fix two sparse warnings
Simple changes to fix warnings:

      CHECK   drivers/infiniband/hw/nes/nes_verbs.c
    nes_verbs.c:1944:45: warning: Using plain integer as NULL pointer
    nes_verbs.c:1944:48: warning: Using plain integer as NULL pointer
      CHECK   drivers/infiniband/hw/nes/nes_cm.c
    nes_cm.c:2645:43: warning: mixing different enum types
    nes_cm.c:2645:43:     int enum iw_cm_event_type  versus
    nes_cm.c:2645:43:     int enum iw_cm_event_status

Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
Acked-by: Chien Tung <chien.tin.tung@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-04 10:00:34 -07:00
Or Gerlitz 18199f573e RDMA/cxgb3: Make needlessly global iwch_l2t_send() static
Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-04 09:57:01 -07:00
Or Gerlitz 48d8fcebb7 IB/iser: Make needlessly global iser_alloc_rx_descriptors() static
Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-04 09:54:55 -07:00
Steve Wise a5f4a07820 RDMA/cxgb4: Add timeouts when waiting for FW responses
Don't hang a host thread if the FW stops responding.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-04 09:54:42 -07:00
Jiri Kosina d790d4d583 Merge branch 'master' into for-next 2010-08-04 15:14:38 +02:00
Ralph Campbell a5210c12b7 IB/qib: Fix race between qib_error_qp() and receive packet processing
When transitioning a QP to the error state, in progress RWQEs need to
be marked complete.  This also involves releasing the reference count
to the memory regions referenced in the SGEs.  The locking in the
receive packet processing wasn't sufficient to prevent qib_error_qp()
from modifying the r_sge state at the same time, thus leading to
kernel panics.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-03 13:59:47 -07:00
Ralph Campbell 3e3aed0b88 IB/qib: Limit the number of packets processed per interrupt
Don't processes too many packets without allowing other IRQ functions
a chance to run. Otherwise, there is a chance of getting a "soft
lockup" messages and poor application response times.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-03 13:59:25 -07:00
Ira Weiny 4c6931f5d4 IB/qib: Allow writes to the diag_counters to be able to clear them
Signed-off-by: Ira Weiny <weiny2@llnl.gov>
Acked-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-03 13:59:19 -07:00
Ralph Campbell 0502f94c62 IB/qib: Set cfgctxts to number of CPUs by default
Up to now, we have set the number of available user contexts based on
the number of hardware contexts which is set according to the number
of available CPUs.  This was fine since most CPUs had a power of two
number of cores and the chip supported 4, 8, or 16 user contexts.  Now
that some systems have 12 cores, the default isn't optimal and should
be set to 12 even though 16 hardware contexts need to be enabled.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-03 13:59:05 -07:00
Steve Wise ca5a22028d RDMA/cxgb4: Set/reset the EP timer inside EP lock
Endpoint timer manipulation needs to be done inside the lock.  Otherwise
we can get into a situation where a timer is stopped before it is started,
which hits the WARN_ON() in stop_ep_timer().

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-02 21:06:17 -07:00
Steve Wise d4f1a5c6ef RDMA/cxgb4: Use correct control txq
There is only one control txq per tx channel.  So use the port number
as the queue index when sending.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-02 21:06:12 -07:00
Steve Wise 73d6fcad2a RDMA/cxgb4: Fix race in fini path
There exists a race condition where the app disconnects, which
initiates an orderly close (via rdma_fini()), concurrently with an
ingress abort condition, which initiates an abortive close operation.
Since rdma_fini() must be called without IRQs disabled, the fini can
be called after the QP has been transitioned to ERROR.  This is ok,
but we need to protect against qp->ep getting NULLed.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-02 21:06:06 -07:00
Sean Hefty 50a025c69e IB/cm: Check LAP state before sending an MRA
NULL pointer dereferences in ib_cm_init_qp_attr() were seen by some
users.  From a crash dump, I determined that we died in
cm_init_qp_rts_attr() (it's inlined, so it doesn't show up in the
traceback) on the line labeled below:

static int cm_init_qp_rts_attr(struct cm_id_private *cm_id_priv,
                               struct ib_qp_attr *qp_attr,
                               int *qp_attr_mask)
{
        ........
        if (cm_id_priv->id.lap_state == IB_CM_LAP_UNINIT) {
                .....
        } else {
               *qp_attr_mask = IB_QP_ALT_PATH | IB_QP_PATH_MIG_STATE;
               qp_attr->alt_port_num = cm_id_priv->alt_av.port->port_num; <-die


The problem is that the rdma_cm can call ib_send_cm_mra() after a
connection has been established.  The ib_cm incorrectly assumes that
the MRA is in response to a LAP (load alternate path) message, even
though no LAP message has been received.  The ib_cm needs to check the
lap_state before sending an MRA if the cm_id state is established.

Reported-by: Arthur Kepner <akepner@sgi.com>
Reported-by: Josh England <jjengla@gmail.com>
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-28 15:18:24 -07:00
Faisal Latif cd6860eb03 RDMA/nes: Fix hangs on ifdown
When ib_unregister_device() is called from netdev stop during ifdown,
it sometimes hangs. Changes made to indicate port_err to ib_dispatch_event()
during netdev stop and port_active during netdev open. The
ib_unregister_device() is only called during remove of the module.

Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-28 15:14:27 -07:00
Chien Tung 0eec495ee6 RDMA/nes: Store and print eeprom version
Read and print eeprom version and save it off for later use.
Also delete a tab.

Signed-off-by: Chien Tung <chien.tin.tung@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-28 15:12:38 -07:00
Peter Huewe 33085bb8da RDMA/nes: Convert pci_table entries to PCI_VDEVICE
This patch converts pci_table entries, where .subvendor=PCI_ANY_ID and
.subdevice=PCI_ANY_ID, .class=0 and .class_mask=0, to use the
PCI_VDEVICE macro, and thus improves readability.

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-28 10:39:33 -07:00
Alexander Schmidt e675b6db12 IB/ehca: Catch failing ioremap()
When ioremap() fails with a NULL pointer, catch the error and pass it
to the caller of create_qp() or create_cq() instead of trying to
dereference the NULL pointer later on.

Signed-off-by: Alexander Schmidt <alexs@linux.vnet.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-21 12:46:29 -07:00
Dave Olson bdf8edcb57 IB/qib: Allow PSM to select from multiple port assignment algorithms
We used to allow only full specification, or using all contexts within
an HCA before moving to the next HCA.  We now allow an additional
method -- round-robining through HCAs -- and make that the default.

Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-21 11:39:36 -07:00
Ralph Campbell 2d978a953b IB/qib: Turn off IB latency mode
Turn off IB latency mode. This improves link quality for slower
process chips.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-21 11:39:31 -07:00
Arnd Bergmann dd378c2102 IB/qib: Use generic_file_llseek
When the default llseek action gets changed to no_llseek, all file
systems relying on the current behaviour need to set explicit .llseek
operations.

In case of qib_fs, we want the files to be seekable, so
generic_file_llseek fits best.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-21 11:39:27 -07:00
Steve Wise d37ac31ddc RDMA/cxgb4: Support variable sized work requests
T4 EQ entries are in multiples of 64 bytes.  Currently the RDMA SQ and
RQ use fixed sized entries composed of 4 EQ entries for the SQ and 2
EQ entries for the RQ.  For optimial latency with small IO, we need to
change this so the HW only needs to DMA the EQ entries actually used
by a given work request.

Implementation:

- add wq_pidx counter to track where we are in the EQ.  cidx/pidx are
  used for the sw sq/rq tracking and flow control.

- the variable part of work requests is the SGL.  Add new functions to
  build the SGL and/or immediate data directly in the EQ memory
  wrapping when needed.

- adjust the min burst size for the EQ contexts to 64B.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-21 11:16:20 -07:00
Dan Carpenter 3d4f9a28e0 RDMA/cxgb3: Clean up signed check of unsigned variable
Q_FREECNT() returns the number of spaces free.  This should never be a
negative amount.  Also the num_wrs is an unsigned int so it can never
be less than zero.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-21 10:57:25 -07:00
David Rientjes d3c814e8b2 RDMA/cxgb4: Remove dependency on __GFP_NOFAIL
The alloc_skb() in various allocations are failable, so remove
__GFP_NOFAIL from their masks.

Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-21 10:55:05 -07:00
Steve Wise ba6d39256b RDMA/cxgb4: Add module option to tweak delayed ack
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-21 10:53:52 -07:00
Ben Hutchings dccb816de3 IB/ipath: Fix probe failure path
The failure path in ipath_init_one() does not match the cleanup code
in ipath_remove_one() and appears to leave interrupts enabled in some
cases.  Change it to match.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-21 10:48:39 -07:00
Joe Perches 78e2c6415a drivers/infiniband: Remove unnecessary casts of private_data
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-07-20 17:23:32 +02:00
Alexander Schmidt 91fb0dd9cb IB/ehca: Fix bitmask handling for lock_hcalls
Fix reading hcall locking capability bit from device capabilities.

Signed-off-by: Alexander Schmidt <alexs@linux.vnet.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-19 13:23:32 -07:00
Ralph Campbell cc323b2aaa IB/qib: Avoid variable-length array
Rather than use a variable size array allocation on the stack,
define a constant for the maximum array size possible.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-19 13:21:24 -07:00
Roland Dreier 85963e4cbc RDMA/cxgb4: Remove unneeded NULL check
The rest of the code seems to assume that ep->com.cm_id can't be NULL,
so remove an unneeded test.

Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-19 13:13:09 -07:00
Dan Carpenter c1d7356c85 RDMA/cxgb4: Remove unneeded assignment
We don't need to assign rpl here, we do that later on.

Signed-off-by: Dan Carpenter <error27@gmail.com>

[ Indeed this assignment makes no sense, since skb is set to NULL a
  couple of lines before.  - Roland ]

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-19 13:09:40 -07:00
Roland Dreier ea9f3bc6d1 RDMA/nes: Rewrite expression to avoid undefined semantics
Change code like

	x = expr(++x)

that assigns to x twice without a sequence point in between to the
intended (and well-defined)

	x = expr(x + 1)

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-14 13:29:21 -07:00