Commit Graph

44611 Commits

Author SHA1 Message Date
Linus Torvalds a6b52a9db8 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI: Fixes device power states array overflow
  ACPI, APEI, HEST, Detect duplicated hardware error source ID
  ACPI: Fix lockdep false positives in acpi_power_off()
2011-07-17 12:47:47 -07:00
David Lamparter 69ecca86da net: vlan, qlcnic: make vlan_find_dev private
there is only one user of vlan_find_dev outside of the actual vlan code:
qlcnic uses it to iterate over some VLANs it knows.

let's just make vlan_find_dev private to the VLAN code and have the
iteration in qlcnic be a bit more direct. (a few rcu dereferences less
too)

Signed-off-by: David Lamparter <equinox@diac24.net>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Amit Kumar Salecha <amit.salecha@qlogic.com>
Cc: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Cc: linux-driver@qlogic.com
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-17 12:33:22 -07:00
David Lamparter 178edcbc6b net: add 802.1ad / 802.1ah / QinQ ethertypes
define ETH_P_8021AD to 88a8 (assigned by IEEE) and add ETH_P_QINQ{1,2,3}
for the pre-standard 9{1,2,3}00 types. all of them use 802.1q frame
format, with 1 bit used differently in some cases.

also define ETH_P_8021AH to 88e7 (assigned by IEEE). this is Mac-in-Mac
and uses a different, 16-byte header.

Signed-off-by: David Lamparter <equinox@diac24.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-17 12:33:22 -07:00
Oleg Nesterov d184d6eb1d ptrace: dont send SIGSTOP on auto-attach if PT_SEIZED
The fake SIGSTOP during attach has numerous problems. PTRACE_SEIZE
is already fine, but we have basically the same problems is SIGSTOP
is sent on auto-attach, the tracer can't know if this signal signal
should be cancelled or not.

Change ptrace_event() to set JOBCTL_TRAP_STOP if the new child is
PT_SEIZED, this triggers the PTRACE_EVENT_STOP report.

Thereafter a PT_SEIZED task can never report the bogus SIGSTOP.

Test-case:

	#define PTRACE_SEIZE		0x4206
	#define PTRACE_SEIZE_DEVEL	0x80000000
	#define PTRACE_EVENT_STOP	7
	#define WEVENT(s)		((s & 0xFF0000) >> 16)

	int main(void)
	{
		int child, grand_child, status;
		long message;

		child = fork();
		if (!child) {
			kill(getpid(), SIGSTOP);
			fork();
			assert(0);
			return 0x23;
		}

		assert(ptrace(PTRACE_SEIZE, child, 0,PTRACE_SEIZE_DEVEL) == 0);
		assert(wait(&status) == child);
		assert(WIFSTOPPED(status) && WSTOPSIG(status) == SIGSTOP);

		assert(ptrace(PTRACE_SETOPTIONS, child, 0, PTRACE_O_TRACEFORK) == 0);

		assert(ptrace(PTRACE_CONT, child, 0,0) == 0);
		assert(waitpid(child, &status, 0) == child);
		assert(WIFSTOPPED(status) && WSTOPSIG(status) == SIGTRAP);
		assert(WEVENT(status) == PTRACE_EVENT_FORK);

		assert(ptrace(PTRACE_GETEVENTMSG, child, 0, &message) == 0);
		grand_child = message;

		assert(waitpid(grand_child, &status, 0) == grand_child);
		assert(WIFSTOPPED(status) && WSTOPSIG(status) == SIGTRAP);
		assert(WEVENT(status) == PTRACE_EVENT_STOP);

		kill(child, SIGKILL);
		kill(grand_child, SIGKILL);
		return 0;
	}

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
2011-07-17 20:23:52 +02:00
Oleg Nesterov dcace06cc2 ptrace: mv send-SIGSTOP from do_fork() to ptrace_init_task()
If the new child is traced, do_fork() adds the pending SIGSTOP.
It assumes that either it is traced because of auto-attach or the
tracer attached later, in both cases sigaddset/set_thread_flag is
correct even if SIGSTOP is already pending.

Now that we have PTRACE_SEIZE this is no longer right in the latter
case. If the tracer does PTRACE_SEIZE after copy_process() makes the
child visible the queued SIGSTOP is wrong.

We could check PT_SEIZED bit and change ptrace_attach() to set both
PT_PTRACED and PT_SEIZED bits simultaneously but see the next patch,
we need to know whether this child was auto-attached or not anyway.

So this patch simply moves this code to ptrace_init_task(), this
way we can never race with ptrace_attach().

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
2011-07-17 20:23:51 +02:00
Oleg Nesterov 6634ae1033 ptrace_init_task: initialize child->jobctl explicitly
new_child->jobctl is not initialized during the fork, it is copied
from parent->jobctl. Currently this is harmless, the forking task
is running and copy_process() can't succeed if signal_pending() is
true, so only JOBCTL_STOP_DEQUEUED can be copied. Still this is a
bit fragile, it would be more clean to set ->jobctl = 0 explicitly.

Also, check ->ptrace != 0 instead of PT_PTRACED, move the
CONFIG_HAVE_HW_BREAKPOINT code up.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
2011-07-17 20:23:51 +02:00
David S. Miller 542d4d685f neigh: Kill ndisc_ops->queue_xmit
It is always dev_queue_xmit().

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-16 18:30:59 -07:00
David S. Miller b23b5455b6 neigh: Kill hh_cache->hh_output
It's just taking on one of two possible values, either
neigh_ops->output or dev_queue_xmit().  And this is purely depending
upon whether nud_state has NUD_CONNECTED set or not.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-16 17:45:02 -07:00
David S. Miller 47ec132a40 neigh: Kill neigh_ops->hh_output
It's always dev_queue_xmit().

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-16 17:39:57 -07:00
David S. Miller 05e3aa0949 net: Create and use new helper, neigh_output().
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-16 17:26:00 -07:00
Stefan Richter f6a7cd0212 firewire: cdev: ABI documentation enhancements
Add overview documentation in Documentation/ABI/stable/firewire-cdev.

Improve the inline reference documentation in firewire-cdev.h:

  - Add /* available since kernel... */ comments to event numbers
    consistent with the comments on ioctl numbers.

  - Shorten some documentation on an event and an ioctl that are
    less interesting to current programming because there are newer
    preferable variants.

  - Spell Configuration ROM (name of an IEEE 1212 register) in
    upper case.

  - Move the dummy FW_CDEV_VERSION out of the reader's field of
    vision.  We should remove it from the header next year or so.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-07-16 07:24:32 +02:00
Stefan Richter 93b37905f7 firewire: cdev: prevent race between first get_info ioctl and bus reset event queuing
Between open(2) of a /dev/fw* and the first FW_CDEV_IOC_GET_INFO
ioctl(2) on it, the kernel already queues FW_CDEV_EVENT_BUS_RESET events
to be read(2) by the client.  The get_info ioctl is practically always
issued right away after open, hence this condition only occurs if the
client opens during a bus reset, especially during a rapid series of bus
resets.

The problem with this condition is twofold:

  - These bus reset events carry the (as yet undocumented) @closure
    value of 0.  But it is not the kernel's place to choose closures;
    they are privat to the client.  E.g., this 0 value forced from the
    kernel makes it unsafe for clients to dereference it as a pointer to
    a closure object without NULL pointer check.

  - It is impossible for clients to determine the relative order of bus
    reset events from get_info ioctl(2) versus those from read(2),
    except in one way:  By comparison of closure values.  Again, such a
    procedure imposes complexity on clients and reduces freedom in use
    of the bus reset closure.

So, change the ABI to suppress queuing of bus reset events before the
first FW_CDEV_IOC_GET_INFO ioctl was issued by the client.

Note, this ABI change cannot be version-controlled.  The kernel cannot
distinguish old from new clients before the first FW_CDEV_IOC_GET_INFO
ioctl.

We will try to back-merge this change into currently maintained stable/
longterm series, and we only document the new behaviour.  The old
behavior is now considered a kernel bug, which it basically is.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: <stable@kernel.org>
2011-07-16 07:24:32 +02:00
Grant Likely 8c11642a50 Merge commit 'v3.0-rc7' into devicetree/next 2011-07-15 20:11:34 -06:00
Rafael J. Wysocki 7ae033cc0d Merge branch 'pm-runtime' into for-linus
* pm-runtime:
  OMAP: PM: disable idle on suspend for GPIO and UART
  OMAP: PM: omap_device: add API to disable idle on suspend
  OMAP: PM: omap_device: add system PM methods for PM domain handling
  OMAP: PM: omap_device: conditionally use PM domain runtime helpers
  PM / Runtime: Add new helper function: pm_runtime_status_suspended()
  PM / Runtime: Consistent utilization of deferred_resume
  PM / Runtime: Prevent runtime_resume from racing with probe
  PM / Runtime: Replace "run-time" with "runtime" in documentation
  PM / Runtime: Improve documentation of enable, disable and barrier
  PM: Limit race conditions between runtime PM and system sleep (v2)
  PCI / PM: Detect early wakeup in pci_pm_prepare()
  PM / Runtime: Return special error code if runtime PM is disabled
  PM / Runtime: Update documentation of interactions with system sleep
2011-07-15 23:59:25 +02:00
Rafael J. Wysocki ba1389d74f Merge branch 'pm-domains' into for-linus
* pm-domains: (33 commits)
  ARM / shmobile: Return -EBUSY from A4LC power off if A3RV is active
  PM / Domains: Take .power_off() error code into account
  ARM / shmobile: Use genpd_queue_power_off_work()
  ARM / shmobile: Use pm_genpd_poweroff_unused()
  PM / Domains: Introduce function to power off all unused PM domains
  PM / Domains: Queue up power off work only if it is not pending
  PM / Domains: Improve handling of wakeup devices during system suspend
  PM / Domains: Do not restore all devices on power off error
  PM / Domains: Allow callbacks to execute all runtime PM helpers
  PM / Domains: Do not execute device callbacks under locks
  PM / Domains: Make failing pm_genpd_prepare() clean up properly
  PM / Domains: Set device state to "active" during system resume
  ARM: mach-shmobile: sh7372 A3RV requires A4LC
  PM / Domains: Export pm_genpd_poweron() in header
  ARM: mach-shmobile: sh7372 late pm domain off
  ARM: mach-shmobile: Runtime PM late init callback
  ARM: mach-shmobile: sh7372 D4 support
  ARM: mach-shmobile: sh7372 A4MP support
  ARM: mach-shmobile: sh7372: make sure that fsi is peripheral of spu2
  ARM: mach-shmobile: sh7372 A3SG support
  ...
2011-07-15 23:59:09 +02:00
MyungJoo Ham 3b5fe85252 PM / Suspend: Add .suspend_again() callback to suspend_ops
A system or a device may need to control suspend/wakeup events. It may
want to wakeup the system after a predefined amount of time or at a
predefined event decided while entering suspend for polling or delayed
work. Then, it may want to enter suspend again if its predefined wakeup
condition is the only wakeup reason and there is no outstanding events;
thus, it does not wakeup the userspace unnecessary or unnecessary
devices and keeps suspended as long as possible (saving the power).

Enabling a system to wakeup after a specified time can be easily
achieved by using RTC. However, to enter suspend again immediately
without invoking userland and unrelated devices, we need additional
features in the suspend framework.

Such need comes from:

 1. Monitoring a critical device status without interrupts that can
wakeup the system. (in-suspend polling)
 An example is ambient temperature monitoring that needs to shut down
the system or a specific device function if it is too hot or cold. The
temperature of a specific device may be needed to be monitored as well;
e.g., a charger monitors battery temperature in order to stop charging
if overheated.

 2. Execute critical "delayed work" at suspend.
 A driver or a system/board may have a delayed work (or any similar
things) that it wants to execute at the requested time.
 For example, some chargers want to check the battery voltage some
time (e.g., 30 seconds) after the battery is fully charged and the
charger has stopped. Then, the charger restarts charging if the voltage
has dropped more than a threshold, which is smaller than "restart-charger"
voltage, which is a threshold to restart charging regardless of the
time passed.

This patch allows to add "suspend_again" callback at struct
platform_suspend_ops and let the "suspend_again" callback return true if
the system is required to enter suspend again after the current instance
of wakeup. Device-wise suspend_again implemented at dev_pm_ops or
syscore is not done because: a) suspend_again feature is usually under
platform-wise decision and controls the behavior of the whole platform
and b) There are very limited devices related to the usage cases of
suspend_again; chargers and temperature sensors are mentioned so far.

With suspend_again callback registered at struct platform_suspend_ops
suspend_ops in kernel/power/suspend.c with suspend_set_ops by the
platform, the suspend framework tries to enter suspend again by
looping suspend_enter() if suspend_again has returned true and there has
been no errors in the suspending sequence or pending wakeups (by
pm_wakeup_pending).

Tested at Exynos4-NURI.

[rjw: Fixed up kerneldoc comment for suspend_enter().]

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-15 23:58:19 +02:00
Nishanth Menon 99f381d354 PM / OPP: Introduce function to free cpufreq table
cpufreq table allocated by opp_init_cpufreq_table is better
freed by OPP layer itself. This allows future modifications to
the table handling to be transparent to the users.

Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-15 23:58:18 +02:00
Peter Korsgaard 1bb6f9b042 mcp23s08: get rid of setup/teardown callbacks
There's no in-tree users, and bus notifiers are more generic anyway.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-15 13:54:17 -06:00
Alex Deucher e3c1620434 drm/radeon/kms: add new NI pci ids
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-07-15 16:10:55 +01:00
John W. Linville 95a943c162 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
Conflicts:
	net/bluetooth/l2cap_core.c
2011-07-15 10:05:24 -04:00
Andy Lutomirski 574c44fa8f ia64: Replace clocksource.fsys_mmio with generic arch data
Now that clocksource.archdata is available, use it for ia64-specific
code.

Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: linux-ia64@vger.kernel.org
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: John Stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andy Lutomirski <luto@mit.edu>
Link: http://lkml.kernel.org/r/d31de0ee0842a0e322fb6441571c2b0adb323fa2.1310563276.git.luto@mit.edu
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-14 17:57:09 -07:00
Michał Mirosław 62f2a3a48b net: remove NETIF_F_ALL_TX_OFFLOADS
There is no software fallback implemented for SCTP or FCoE checksumming,
and so it should not be passed on by software devices like bridge or bonding.

For VLAN devices, this is different. First, the driver for underlying device
should be prepared to get offloaded packets even when the feature is disabled
(especially if it advertises it in vlan_features). Second, devices under
VLANs do not get replaced without tearing down the VLAN first.

This fixes a mess I accidentally introduced while converting bonding to
ndo_fix_features.

NETIF_F_SOFT_FEATURES are removed from BOND_VLAN_FEATURES because they
are unused as of commit 712ae51afd.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14 15:18:49 -07:00
Michał Mirosław e20e694073 net: remove SK_ROUTE_CAPS from meta ematch
Remove it, as it indirectly exposes netdev features. It's not used in
iproute2 (2.6.38) - is anything else using its interface?

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14 14:45:59 -07:00
Michał Mirosław fec30c3381 net: unexport netdev_fix_features()
It is not used anywhere except net/core/dev.c now.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14 14:44:32 -07:00
Steven Rostedt 4a9bd3f134 tracing: Have dynamic size event stack traces
Currently the stack trace per event in ftace is only 8 frames.
This can be quite limiting and sometimes useless. Especially when
the "ignore frames" is wrong and we also use up stack frames for
the event processing itself.

Change this to be dynamic by adding a percpu buffer that we can
write a large stack frame into and then copy into the ring buffer.

For interrupts and NMIs that come in while another event is being
process, will only get to use the 8 frame stack. That should be enough
as the task that it interrupted will have the full stack frame anyway.

Requested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-14 16:36:53 -04:00
Rafael J. Wysocki 0bc5b2debb ARM / shmobile: Use genpd_queue_power_off_work()
Make pd_power_down_a3rv() use genpd_queue_power_off_work() to queue
up the powering off of the A4LC domain to avoid queuing it up when
it is pending.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Magnus Damm <damm@opensource.se>
2011-07-14 20:59:07 +02:00
David S. Miller 6a7ebdf2fd Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	net/bluetooth/l2cap_core.c
2011-07-14 07:56:40 -07:00
David S. Miller f6b72b6217 net: Embed hh_cache inside of struct neighbour.
Now that there is a one-to-one correspondance between neighbour
and hh_cache entries, we no longer need:

1) dynamic allocation
2) attachment to dst->hh
3) refcounting

Initialization of the hh_cache entry is indicated by hh_len
being non-zero, and such initialization is always done with
the neighbour's lock held as a writer.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14 07:53:20 -07:00
Len Brown 7fb574a97f Merge branches 'd3cold', 'bugzilla-37412' and 'bugzilla-38152' into release 2011-07-14 00:16:38 -04:00
Lin Ming b4a03b9aa9 ACPI: Fixes device power states array overflow
Commit 28c2103 added new state ACPI_STATE_D3_COLD, so the device power
states array must be expanded by one also.

v2: Use ACPI_D_STATE_COUNT instead of number 5 for the array size.

Reported-by: Dan Carpenter <error27@gmail.com>
Suggested-by: Oldřich Jedlička <oldium.pro@seznam.cz>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-07-13 23:53:22 -04:00
Linus Torvalds 51414d4108 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc:
  mmc: core: Bus width testing needs to handle suspend/resume
2011-07-13 16:47:31 -07:00
Linus Torvalds 5d7d5d9332 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (21 commits)
  slip: fix wrong SLIP6 ifdef-endif placing
  natsemi: fix another dma-debug report
  sctp: ABORT if receive, reassmbly, or reodering queue is not empty while closing socket
  net: Fix default in docs for tcp_orphan_retries.
  hso: fix a use after free condition
  net/natsemi: Fix module parameter permissions
  XFRM: Fix memory leak in xfrm_state_update
  sctp: Enforce retransmission limit during shutdown
  mac80211: fix TKIP replay vulnerability
  mac80211: fix ie memory allocation for scheduled scans
  ssb: fix init regression of hostmode PCI core
  rtlwifi: rtl8192cu: Add new USB ID for Netgear WNA1000M
  ath9k: Fix tx throughput drops for AR9003 chips with AES encryption
  carl9170: add NEC WL300NU-AG usbid
  cfg80211: fix deadlock with rfkill/sched_scan by adding new mutex
  ath5k: fix incorrect use of drvdata in PCI suspend/resume code
  ath5k: fix incorrect use of drvdata in sysfs code
  Bluetooth: Fix memory leak under page timeouts
  Bluetooth: Fix regression with incoming L2CAP connections
  Bluetooth: Fix hidp disconnect deadlocks and lost wakeup
  ...
2011-07-13 13:51:32 -07:00
Philip Rakity f39b2dd9d0 mmc: core: Bus width testing needs to handle suspend/resume
On reading the ext_csd for the first time (in 1 bit mode), save the
ext_csd information needed for bus width compare.

On every pass we make re-reading the ext_csd, compare the data
against the saved ext_csd data.

This fixes a regression introduced in 3.0-rc1 by 08ee80cc39
("mmc: core: eMMC bus width may not work on all platforms"), which
incorrectly assumed we would be re-reading the ext_csd at resume-
time.

Signed-off-by: Philip Rakity <prakity@marvell.com>
Tested-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-13 14:54:37 -04:00
Johannes Berg 95acac61ba mac80211: allow driver to disconnect after resume
In WoWLAN, devices may use crypto keys for TX/RX
and could also implement GTK rekeying. If the
driver isn't able to retrieve replay counters and
similar information from the device upon resume,
or if the device isn't responsive due to platform
issues, it isn't safe to keep the connection up
as GTK rekey messages from during the sleep time
could be replayed against it.

The only protection against that is disconnecting
from the AP. Modifying mac80211 to do that while
it is resuming would be very complex and invasive
in the case that the driver requires a reconfig,
so do it after it has resumed completely. In that
case, however, packets might be replayed since it
can then only happen after TX/RX are up again, so
mark keys for interfaces that need to disconnect
as "tainted" and drop all packets that are sent
or received with those keys.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-13 14:49:43 -04:00
Rafael J. Wysocki 07e49a7a31 ACPI: Fix lockdep false positives in acpi_power_off()
All ACPICA locks are allocated by the same function,
acpi_os_create_lock(), with the help of a local variable called
"lock".  Thus, when lockdep is enabled, it uses "lock" as the
name of all those locks and regards them as instances of the same
lock, which causes it to report possible locking problems with them
when there aren't any.

To work around this problem, define acpi_os_create_lock() as a macro
and make it pass its argument to spin_lock_init(), so that lockdep
uses it as the name of the new lock.  Define this macron in a
Linux-specific file, to minimize the resulting modifications of
the OS-independent ACPICA parts.

This change is based on an earlier patch from Andrea Righi and it
addresses a regression from 2.6.39 tracked as
https://bugzilla.kernel.org/show_bug.cgi?id=38152

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-and-tested-by: Borislav Petkov <bp@alien8.de>
Tested-by: Andrea Righi <andrea@betterlinux.com>
Reviewed-by: Florian Mickler <florian@mickler.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-07-13 14:49:09 -04:00
Andy Lutomirski 433bd805e5 clocksource: Replace vread with generic arch data
The vread field was bloating struct clocksource everywhere except
x86_64, and I want to change the way this works on x86_64, so let's
split it out into per-arch data.

Cc: x86@kernel.org
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: linux-ia64@vger.kernel.org
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: John Stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andy Lutomirski <luto@mit.edu>
Link: http://lkml.kernel.org/r/3ae5ec76a168eaaae63f08a2a1060b91aa0b7759.1310563276.git.luto@mit.edu
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-13 11:23:12 -07:00
Rafael J. Wysocki 5125bbf388 PM / Domains: Introduce function to power off all unused PM domains
Add a new function pm_genpd_poweroff_unused() queuing up the
execution of pm_genpd_poweroff() for every initialized generic PM
domain.  Calling it will cause every generic PM domain without
devices in use to be powered off.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Magnus Damm <damm@opensource.se>
2011-07-13 12:31:52 +02:00
David S. Miller 5c25f686db net: Kill support for multiple hh_cache entries per neighbour
This never, ever, happens.

Neighbour entries are always tied to one address family, and therefore
one set of dst_ops, and therefore one dst_ops->protocol "hh_type"
value.

This capability was blindly imported by Alexey Kuznetsov when he wrote
the neighbour layer.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-13 02:29:59 -07:00
David S. Miller e69dd336ee net: Push protocol type directly down to header_ops->cache()
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-13 02:29:59 -07:00
David Miller 3769cffb1c ipv4: Inline neigh binding.
Get rid of all of the useless and costly indirection
by doing the neigh hash table lookup directly inside
of the neighbour binding.

Rename from arp_bind_neighbour to rt_bind_neighbour.

Use new helpers {__,}ipv4_neigh_lookup()

In rt_bind_neighbour() get rid of useless tests which
are never true in the context this function is called,
namely dev is never NULL and the dst->neighbour is
always NULL.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-13 01:12:28 -07:00
Tejun Heo 1e01979c8f x86, numa: Implement pfn -> nid mapping granularity check
SPARSEMEM w/o VMEMMAP and DISCONTIGMEM, both used only on 32bit, use
sections array to map pfn to nid which is limited in granularity.  If
NUMA nodes are laid out such that the mapping cannot be accurate, boot
will fail triggering BUG_ON() in mminit_verify_page_links().

On 32bit, it's 512MiB w/ PAE and SPARSEMEM.  This seems to have been
granular enough until commit 2706a0bf7b (x86, NUMA: Enable
CONFIG_AMD_NUMA on 32bit too).  Apparently, there is a machine which
aligns NUMA nodes to 128MiB and has only AMD NUMA but not SRAT.  This
led to the following BUG_ON().

 On node 0 totalpages: 2096615
   DMA zone: 32 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 3927 pages, LIFO batch:0
   Normal zone: 1740 pages used for memmap
   Normal zone: 220978 pages, LIFO batch:31
   HighMem zone: 16405 pages used for memmap
   HighMem zone: 1853533 pages, LIFO batch:31
 BUG: Int 6: CR2   (null)
      EDI   (null)  ESI 00000002  EBP 00000002  ESP c1543ecc
      EBX f2400000  EDX 00000006  ECX   (null)  EAX 00000001
      err   (null)  EIP c16209aa   CS 00000060  flg 00010002
 Stack: f2400000 00220000 f7200800 c1620613 00220000 01000000 04400000 00238000
          (null) f7200000 00000002 f7200b58 f7200800 c1620929 000375fe   (null)
        f7200b80 c16395f0 00200a02 f7200a80   (null) 000375fe 00000002   (null)
 Pid: 0, comm: swapper Not tainted 2.6.39-rc5-00181-g2706a0b #17
 Call Trace:
  [<c136b1e5>] ? early_fault+0x2e/0x2e
  [<c16209aa>] ? mminit_verify_page_links+0x12/0x42
  [<c1620613>] ? memmap_init_zone+0xaf/0x10c
  [<c1620929>] ? free_area_init_node+0x2b9/0x2e3
  [<c1607e99>] ? free_area_init_nodes+0x3f2/0x451
  [<c1601d80>] ? paging_init+0x112/0x118
  [<c15f578d>] ? setup_arch+0x791/0x82f
  [<c15f43d9>] ? start_kernel+0x6a/0x257

This patch implements node_map_pfn_alignment() which determines
maximum internode alignment and update numa_register_memblks() to
reject NUMA configuration if alignment exceeds the pfn -> nid mapping
granularity of the memory model as determined by PAGES_PER_SECTION.

This makes the problematic machine boot w/ flatmem by rejecting the
NUMA config and provides protection against crazy NUMA configurations.

Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20110712074534.GB2872@htj.dyndns.org
LKML-Reference: <20110628174613.GP478@escobedo.osrc.amd.com>
Reported-and-Tested-by: Hans Rosenfeld <hans.rosenfeld@amd.com>
Cc: Conny Seidel <conny.seidel@amd.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-12 21:58:29 -07:00
Linus Torvalds 8d86e5f914 Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/mm: Fix memory_block_size_bytes() for non-pseries
  mm: Move definition of MIN_MEMORY_BLOCK_SIZE to a header
2011-07-12 14:21:19 -07:00
Linus Torvalds d93a881dd7 Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc:
  pcmcia: pxa2xx/vpac270: free gpios on exist rather than requesting
  ARM: pxa/raumfeld: fix device name for codec ak4104
  ARM: pxa/raumfeld: display initialisation fixes
  ARM: pxa/raumfeld: adapt to upcoming hardware change
  ARM: pxa: fix gpio_to_chip() clash with gpiolib namespace
  genirq: replace irq_gc_ack() with {set,clr}_bit variants (fwd)
  arm: mach-vt8500: add forgotten irq_data conversion
  ARM: pxa168: correct nand pmu setting
  ARM: pxa910: correct nand pmu setting
  ARM: pxa: fix PGSR register address calculation
2011-07-12 14:19:51 -07:00
David S. Miller e2270ea62a netdevice: Kill 'feature' test macros.
Almost all of these have long outstayed their welcome.

And for every one of these macros, there are 10 features for which we
didn't add macros.

Let's just delete them all, and get out of habit of doing things this
way.

Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-07-12 12:28:58 -07:00
Kevin Hilman f3393b62f1 PM / Runtime: Add new helper function: pm_runtime_status_suspended()
This boolean function simply returns whether or not the runtime status
of the device is 'suspended'.  Unlike pm_runtime_suspended(), this
function returns the runtime status whether or not runtime PM for the
device has been disabled or not.

Also add entry to Documentation/power/runtime.txt

Signed-off-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-12 11:17:09 +02:00
Eric Dumazet 4915a0de43 net: introduce __netdev_alloc_skb_ip_align
RX rings should use GFP_KERNEL allocations if possible, add
__netdev_alloc_skb_ip_align() helper to ease this.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-11 20:08:34 -07:00
Benjamin Herrenschmidt a63fdc5156 mm: Move definition of MIN_MEMORY_BLOCK_SIZE to a header
The macro MIN_MEMORY_BLOCK_SIZE is currently defined twice in two .c
files, and I need it in a third one to fix a powerpc bug, so let's
first move it into a header

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
2011-07-12 11:08:01 +10:00
Linus Torvalds c15000b40d Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6:
  [media] msp3400: fill in v4l2_tuner based on vt->type field
  [media] tuner-core.c: don't change type field in g_tuner or g_frequency
  [media] cx18/ivtv: fix g_tuner support
  [media] tuner-core: power up tuner when called with s_power(1)
  [media] v4l2-ioctl.c: check for valid tuner type in S_HW_FREQ_SEEK
  [media] tuner-core: simplify the standard fixup
  [media] tuner-core/v4l2-subdev: document that the type field has to be filled in
  [media] v4l2-subdev.h: remove unused s_mode tuner op
  [media] feature-removal-schedule: change in how radio device nodes are handled
  [media] bttv: fix s_tuner for radio
  [media] pvrusb2: fix g/s_tuner support
  [media] v4l2-ioctl.c: prefill tuner type for g_frequency and g/s_tuner
  [media] tuner-core: fix tuner_resume: use t->mode instead of t->type
  [media] tuner-core: fix s_std and s_tuner
2011-07-11 16:43:27 -07:00
Rafael J. Wysocki c6d22b3726 PM / Domains: Allow callbacks to execute all runtime PM helpers
A deadlock may occur if one of the PM domains' .start_device() or
.stop_device() callbacks or a device driver's .runtime_suspend() or
.runtime_resume() callback executed by the core generic PM domain
code uses a "wrong" runtime PM helper function.  This happens, for
example, if .runtime_resume() from one device's driver calls
pm_runtime_resume() for another device in the same PM domain.
A similar situation may take place if a device's parent is in the
same PM domain, in which case the runtime PM framework may execute
pm_genpd_runtime_resume() automatically for the parent (if it is
suspended at the moment).  This, of course, is undesirable, so
the generic PM domains code should be modified to prevent it from
happening.

The runtime PM framework guarantees that pm_genpd_runtime_suspend()
and pm_genpd_runtime_resume() won't be executed in parallel for
the same device, so the generic PM domains code need not worry
about those cases.  Still, it needs to prevent the other possible
race conditions between pm_genpd_runtime_suspend(),
pm_genpd_runtime_resume(), pm_genpd_poweron() and pm_genpd_poweroff()
from happening and it needs to avoid deadlocks at the same time.
To this end, modify the generic PM domains code to relax
synchronization rules so that:

* pm_genpd_poweron() doesn't wait for the PM domain status to
  change from GPD_STATE_BUSY.  If it finds that the status is
  not GPD_STATE_POWER_OFF, it returns without powering the domain on
  (it may modify the status depending on the circumstances).

* pm_genpd_poweroff() returns as soon as it finds that the PM
  domain's status changed from GPD_STATE_BUSY after it's released
  the PM domain's lock.

* pm_genpd_runtime_suspend() doesn't wait for the PM domain status
  to change from GPD_STATE_BUSY after executing the domain's
  .stop_device() callback and executes pm_genpd_poweroff() only
  if pm_genpd_runtime_resume() is not executed in parallel.

* pm_genpd_runtime_resume() doesn't wait for the PM domain status
  to change from GPD_STATE_BUSY after executing pm_genpd_poweron()
  and sets the domain's status to GPD_STATE_BUSY and increments its
  counter of resuming devices (introduced by this change) immediately
  after acquiring the lock.  The counter of resuming devices is then
  decremented after executing __pm_genpd_runtime_resume() for the
  device and the domain's status is reset to GPD_STATE_ACTIVE (unless
  there are more resuming devices in the domain, in which case the
  status remains GPD_STATE_BUSY).

This way, for example, if a device driver's .runtime_resume()
callback executes pm_runtime_resume() for another device in the same
PM domain, pm_genpd_poweron() called by pm_genpd_runtime_resume()
invoked by the runtime PM framework will not block and it will see
that there's nothing to do for it.  Next, the PM domain's lock will
be acquired without waiting for its status to change from
GPD_STATE_BUSY and the device driver's .runtime_resume() callback
will be executed.  In turn, if pm_runtime_suspend() is executed by
one device driver's .runtime_resume() callback for another device in
the same PM domain, pm_genpd_poweroff() executed by
pm_genpd_runtime_suspend() invoked by the runtime PM framework as a
result will notice that one of the devices in the domain is being
resumed, so it will return immediately.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-12 00:39:36 +02:00
Rafael J. Wysocki 17b75eca76 PM / Domains: Do not execute device callbacks under locks
Currently, the .start_device() and .stop_device() callbacks from
struct generic_pm_domain() as well as the device drivers' runtime PM
callbacks used by the generic PM domains code are executed under
the generic PM domain lock.  This, unfortunately, is prone to
deadlocks, for example if a device and its parent are boths members
of the same PM domain.  For this reason, it would be better if the
PM domains code didn't execute device callbacks under the lock.

Rework the locking in the generic PM domains code so that the lock
is dropped for the execution of device callbacks.  To this end,
introduce PM domains states reflecting the current status of a PM
domain and such that the PM domain lock cannot be acquired if the
status is GPD_STATE_BUSY.  Make threads attempting to acquire a PM
domain's lock wait until the status changes to either
GPD_STATE_ACTIVE or GPD_STATE_POWER_OFF.

This change by itself doesn't fix the deadlock problem mentioned
above, but the mechanism introduced by it will be used for for this
purpose by a subsequent patch.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-12 00:39:29 +02:00
Johannes Berg af71ff8504 cfg80211: fix docbook
Looks like I forgot to document the "gfp" parameter
to cfg80211_gtk_rekey_notify, add it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11 15:02:18 -04:00
Meenakshi Venkataraman 615f7b9bb1 mac80211: add driver RSSI threshold events
mac80211 maintains a running average of the RSSI when a STA
is associated to an AP. Report threshold events to any driver
that has registered callbacks for getting RSSI measurements.

Implement callbacks in mac80211 so that driver can set thresholds.
Add callbacks in mac80211 which is invoked when an RSSI threshold
event occurs.

mac80211: add tracing to rssi_reports api and remove extraneous fn argument
mac80211: scale up rssi thresholds from driver by 16 before storing

Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11 15:02:06 -04:00
John W. Linville 4b42c542af Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/padovan/bluetooth-next-2.6
Conflicts:
	net/bluetooth/l2cap_core.c
2011-07-11 14:58:22 -04:00
Konrad Rzeszutek Wilk 78316ada22 xen/pci: Remove 'xen_allocate_pirq_gsi'.
In the past (2.6.38) the 'xen_allocate_pirq_gsi' would allocate
an entry in a Linux IRQ -> {XEN_IRQ, type, event, ..} array. All
of that has been removed in 2.6.39 and the Xen IRQ subsystem uses
an linked list that is populated when the call to
'xen_allocate_irq_gsi' (universally done from any of the xen_bind_*
calls) is done. The 'xen_allocate_pirq_gsi' is a NOP and there is
no need for it anymore so lets remove it.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-07-11 13:19:33 -04:00
Steven Rostedt 04da85b861 ftrace: Fix warning when CONFIG_FUNCTION_TRACER is not defined
The struct ftrace_hash was declared within CONFIG_FUNCTION_TRACER
but was referenced outside of it.

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-11 10:12:59 -04:00
David S. Miller f610b74b14 ipv4: Use universal hash for ARP.
We need to make sure the multiplier is odd.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-11 01:37:28 -07:00
David S. Miller cd0893369c neigh: Store hash shift instead of mask.
And mask the hash function result by simply shifting
down the "->hash_shift" most significant bits.

Currently which bits we use is arbitrary since jhash
produces entropy evenly across the whole hash function
result.

But soon we'll be using universal hashing functions,
and in those cases more entropy exists in the higher
bits than the lower bits, because they use multiplies.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-11 01:28:12 -07:00
Ilia Kolomisnky e2fd318e3a Bluetooth: Fixes l2cap "command reject" reply according to spec
There can 3 reasons for the "command reject" reply produced
by the stack. Each such reply should be accompanied by the
relevand data ( as defined in spec. ). Currently there is one
instance of "command reject" reply with reason "invalid cid"
wich is fixed. Also, added clean-up definitions related to the
"command reject" replies.

Signed-off-by: Ilia Kolomisnky <iliak@ti.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-07-11 01:43:25 -03:00
Daniel Baluta d84e0bd797 skbuff: update struct sk_buff members comments
Rearrange struct sk_buff members comments to follow their
definition order. Also, add missing comments for ooo_okay
and dropcount members.

Signed-off-by: Daniel Baluta <dbaluta@ixiacom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-10 07:04:04 -07:00
Magnus Damm 18b4f3f5d0 PM / Domains: Export pm_genpd_poweron() in header
Allow SoC-specific code to call pm_genpd_poweron().

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-10 10:39:14 +02:00
Jean-François Dagenais f607e7fc5f w1: ds1wm: add a reset recovery parameter
This fixes a regression in 3.0 reported by Paul Parsons regarding the
removal of the msleep(1) in the ds1wm_reset() function:

: The linux-3.0-rc4 DS1WM 1-wire driver is logging "bus error, retrying"
: error messages on an HP iPAQ hx4700 PDA (XScale-PXA270):
:
: <snip>
: Driver for 1-wire Dallas network protocol.
: DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko
: 1-Wire driver for the DS2760 battery monitor  chip  - (c) 2004-2005, Szabolcs Gyurko
: ds1wm ds1wm: pass: 1 bus error, retrying
: ds1wm ds1wm: pass: 2 bus error, retrying
: ds1wm ds1wm: pass: 3 bus error, retrying
: ds1wm ds1wm: pass: 4 bus error, retrying
: ds1wm ds1wm: pass: 5 bus error, retrying
: ...
:
: The visible result is that the battery charging LED is erratic; sometimes
: it works, mostly it doesn't.
:
: The linux-2.6.39 DS1WM 1-wire driver worked OK.  I haven't tried 3.0-rc1,
: 3.0-rc2, or 3.0-rc3.

This sleep should not be required on normal circuitry provided the
pull-ups on the bus are correctly adapted to the slaves.  Unfortunately,
this is not always the case.  The sleep is restored but as a parameter to
the probe function in the pdata.

[akpm@linux-foundation.org: coding-style fixes]
Reported-by: Paul Parsons <lost.distance@yahoo.com>
Tested-by: Paul Parsons <lost.distance@yahoo.com>
Signed-off-by: Jean-François Dagenais <dagenaisj@sonatest.com>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-08 21:14:44 -07:00
Vinicius Costa Gomes 8f36011924 Bluetooth: Add support for returning the encryption key size
This will be useful when userspace wants to restrict some kinds of
operations based on the length of the key size used to encrypt the
link.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-07-08 18:39:31 -03:00
Vinicius Costa Gomes 726b4ffcaa Bluetooth: Add support for storing the key size
In some cases it will be useful having the key size used for
encrypting the link. For example, some profiles may restrict
some operations depending on the key length.

The key size is stored in the key that is passed to userspace
using the pin_length field in the key structure.

For now this field is only valid for LE controllers. 3.0+HS
controllers define the Read Encryption Key Size command, this
field is intended for storing the value returned by that
command.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-07-08 18:39:19 -03:00
Vinicius Costa Gomes 0eb08e3398 Bluetooth: Remove unused field in hci_conn
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-07-08 17:37:22 -03:00
Vinicius Costa Gomes 75d262c2ad Bluetooth: Add functions to manipulate the link key list for SMP
As the LTK (the new type of key being handled now) has more data
associated with it, we need to store this extra data and retrieve
the keys based on that data.

Methods for searching for a key and for adding a new LTK are
introduced here.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-07-08 17:36:31 -03:00
Vinicius Costa Gomes 34918cd71b Bluetooth: Add new structures for supporting SM key distribution
We need these changes because SMP keys may have more information
associated with them, for example, in the LTK case, it has an
encrypted diversifier (ediv) and a random number (rand).

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-07-08 17:36:25 -03:00
Vinicius Costa Gomes 7034b911af Bluetooth: Add support for SMP phase 3 (key distribution)
This adds support for generating and distributing all the keys
specified in the third phase of SMP.

This will make possible to re-establish secure connections, resolve
private addresses and sign commands.

For now, the values generated are random.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-07-08 17:07:43 -03:00
Konrad Rzeszutek Wilk 136d9ebff3 Merge branch 'xen-tmem-selfballoon-v8' of git://git.kernel.org/pub/scm/linux/kernel/git/djm/tmem into stable/drivers
* 'xen-tmem-selfballoon-v8' of git://git.kernel.org/pub/scm/linux/kernel/git/djm/tmem:
  xen: tmem: self-ballooning and frontswap-selfshrinking
2011-07-08 15:07:30 -04:00
Shawn Guo b98c023920 dt: add empty of_property_read_u32[_array] for non-dt
The patch adds empty functions of_property_read_u32 and
of_property_read_u32_array for non-dt build, so that drivers
migrating to dt can save some '#ifdef CONFIG_OF'.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
[grant.likely: Moved things around so only one new static inline is needed]
[grant.likely: Added _string variant]
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-08 12:52:33 -06:00
Dan Magenheimer a50777c791 xen: tmem: self-ballooning and frontswap-selfshrinking
This patch introduces two in-kernel drivers for Xen transcendent memory
("tmem") functionality that complement cleancache and frontswap.  Both
use control theory to dynamically adjust and optimize memory utilization.
Selfballooning controls the in-kernel Xen balloon driver, targeting a goal
value (vm_committed_as), thus pushing less frequently used clean
page cache pages (through the cleancache code) into Xen tmem where
Xen can balance needs across all VMs residing on the physical machine.
Frontswap-selfshrinking controls the number of pages in frontswap,
driving it towards zero (effectively doing a partial swapoff) when
in-kernel memory pressure subsides, freeing up RAM for other VMs.

More detail is provided in the header comment of xen-selfballooning.c.

Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>

[v8: konrad.wilk@oracle.com: set default enablement depending on frontswap]
[v7: konrad.wilk@oracle.com: fix capitalization and punctuation in comments]
[v6: fix frontswap-selfshrinking initialization]
[v6: konrad.wilk@oracle.com: fix init pr_infos; add comments about swap]
[v5: konrad.wilk@oracle.com: add NULL to attr list; move inits up to decls]
[v4: dkiper@net-space.pl: use strict_strtoul plus a few syntactic nits]
[v3: konrad.wilk@oracle.com: fix potential divides-by-zero]
[v3: konrad.wilk@oracle.com: add many more comments, fix nits]
[v2: rebased to linux-3.0-rc1]
[v2: Ian.Campbell@citrix.com: reorganize as new file (xen-selfballoon.c)]
[v2: dkiper@net-space.pl: proper access to vm_committed_as]
[v2: dkiper@net-space.pl: accounting fixes]
Cc: Jan Beulich <JBeulich@novell.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: <xen-devel@lists.xensource.com>
2011-07-08 12:26:21 -06:00
Thomas Graf cd4fcc704f sctp: ABORT if receive, reassmbly, or reodering queue is not empty while closing socket
Trigger user ABORT if application closes a socket which has data
queued on the socket receive queue or chunks waiting on the
reassembly or ordering queue as this would imply data being lost
which defeats the point of a graceful shutdown.

This behavior is already practiced in TCP.

We do not check the input queue because that would mean to parse
all chunks on it to look for unacknowledged data which seems too
much of an effort. Control chunks or duplicated chunks may also
be in the input queue and should not be stopping a graceful
shutdown.

Signed-off-by: Thomas Graf <tgraf@infradead.org>
Acked-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-08 09:53:08 -07:00
Luciano Coelho 1a84ff7564 cfg80211: return -ENOENT when stopping sched_scan while not running
If we try to stop a scheduled scan while it is not running, we should
return -ENOENT instead of simply ignoring the command and returning
success.  This is more consistent with other parts of the code.

Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08 11:47:54 -04:00
Johannes Berg 42d9879550 mac80211: allow driver to generate P1K for IV32
In order to support pre-populating the P1K cache in
iwlwifi hardware for WoWLAN, we need to calculate
the P1K for the current IV32. Allow drivers to get
the P1K for any given IV32 instead of for a given
packet, but keep the packet-based version around as
an inline.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08 11:42:23 -04:00
Johannes Berg 3ea542d3c2 mac80211: allow drivers to access key sequence counter
In order to implement GTK rekeying, the device needs
to be able to encrypt frames with the right PN/IV and
check the PN/IV in RX frames. To be able to tell it
about all those counters, we need to be able to get
them from mac80211, this adds the required API.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08 11:42:22 -04:00
Johannes Berg 523b02ea23 mac80211: fix TKIP races, make API easier to use
Our current TKIP code races against itself on TX
since we can process multiple packets at the same
time on different ACs, but they all share the TX
context for TKIP. This can lead to bad IVs etc.

Also, the crypto offload helper code just obtains
the P1K/P2K from the cache, and can update it as
well, but there's no guarantee that packets are
really processed in order.

To fix these issues, first introduce a spinlock
that will protect the IV16/IV32 values in the TX
context. This first step makes sure that we don't
assign the same IV multiple times or get confused
in other ways.

Secondly, change the way the P1K cache works. I
add a field "p1k_iv32" that stores the value of
the IV32 when the P1K was last recomputed, and
if different from the last time, then a new P1K
is recomputed. This can cause the P1K computation
to flip back and forth if packets are processed
out of order. All this also happens under the new
spinlock.

Finally, because there are argument differences,
split up the ieee80211_get_tkip_key() API into
ieee80211_get_tkip_p1k() and ieee80211_get_tkip_p2k()
and give them the correct arguments.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08 11:11:19 -04:00
John W. Linville 204d1641d2 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem 2011-07-08 11:03:36 -04:00
Dima Zavin 732375c6a5 plist: Remove the need to supply locks to plist heads
This was legacy code brought over from the RT tree and
is no longer necessary.

Signed-off-by: Dima Zavin <dima@android.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Daniel Walker <dwalker@codeaurora.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Link: http://lkml.kernel.org/r/1310084879-10351-2-git-send-email-dima@android.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-08 14:02:53 +02:00
Thomas Graf f8d9605243 sctp: Enforce retransmission limit during shutdown
When initiating a graceful shutdown while having data chunks
on the retransmission queue with a peer which is in zero
window mode the shutdown is never completed because the
retransmission error count is reset periodically by the
following two rules:

 - Do not timeout association while doing zero window probe.
 - Reset overall error count when a heartbeat request has
   been acknowledged.

The graceful shutdown will wait for all outstanding TSN to
be acknowledged before sending the SHUTDOWN request. This
never happens due to the peer's zero window not acknowledging
the continuously retransmitted data chunks. Although the
error counter is incremented for each failed retransmission,
the receiving of the SACK announcing the zero window clears
the error count again immediately. Also heartbeat requests
continue to be sent periodically. The peer acknowledges these
requests causing the error counter to be reset as well.

This patch changes behaviour to only reset the overall error
counter for the above rules while not in shutdown. After
reaching the maximum number of retransmission attempts, the
T5 shutdown guard timer is scheduled to give the receiver
some additional time to recover. The timer is stopped as soon
as the receiver acknowledges any data.

The issue can be easily reproduced by establishing a sctp
association over the loopback device, constantly queueing
data at the sender while not reading any at the receiver.
Wait for the window to reach zero, then initiate a shutdown
by killing both processes simultaneously. The association
will never be freed and the chunks on the retransmission
queue will be retransmitted indefinitely.

Signed-off-by: Thomas Graf <tgraf@infradead.org>
Acked-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-07 14:08:44 -07:00
Linus Torvalds 2a9d6df425 Merge branch 'for-linus' of git://git.kernel.dk/linux-block
* 'for-linus' of git://git.kernel.dk/linux-block:
  drbd: we should write meta data updates with FLUSH FUA
  drbd: fix limit define, we support 1 PiByte now
  drbd: when receive times out on meta socket, also check last receive time on data socket
  drbd: account bitmap IO during resync as resync-(related-)-io
  drbd: don't cond_resched_lock with IRQs disabled
  drbd: add missing spinlock to bitmap receive
  drbd: Use the correct max_bio_size when creating resync requests
  cfq-iosched: make code consistent
  cfq-iosched: fix a rcu warning
2011-07-07 13:22:26 -07:00
David Howells c902ce1bfb FS-Cache: Add a helper to bulk uncache pages on an inode
Add an FS-Cache helper to bulk uncache pages on an inode.  This will
only work for the circumstance where the pages in the cache correspond
1:1 with the pages attached to an inode's page cache.

This is required for CIFS and NFS: When disabling inode cookie, we were
returning the cookie and setting cifsi->fscache to NULL but failed to
invalidate any previously mapped pages.  This resulted in "Bad page
state" errors and manifested in other kind of errors when running
fsstress.  Fix it by uncaching mapped pages when we disable the inode
cookie.

This patch should fix the following oops and "Bad page state" errors
seen during fsstress testing.

  ------------[ cut here ]------------
  kernel BUG at fs/cachefiles/namei.c:201!
  invalid opcode: 0000 [#1] SMP
  Pid: 5, comm: kworker/u:0 Not tainted 2.6.38.7-30.fc15.x86_64 #1 Bochs Bochs
  RIP: 0010: cachefiles_walk_to_object+0x436/0x745 [cachefiles]
  RSP: 0018:ffff88002ce6dd00  EFLAGS: 00010282
  RAX: ffff88002ef165f0 RBX: ffff88001811f500 RCX: 0000000000000000
  RDX: 0000000000000000 RSI: 0000000000000100 RDI: 0000000000000282
  RBP: ffff88002ce6dda0 R08: 0000000000000100 R09: ffffffff81b3a300
  R10: 0000ffff00066c0a R11: 0000000000000003 R12: ffff88002ae54840
  R13: ffff88002ae54840 R14: ffff880029c29c00 R15: ffff88001811f4b0
  FS:  00007f394dd32720(0000) GS:ffff88002ef00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
  CR2: 00007fffcb62ddf8 CR3: 000000001825f000 CR4: 00000000000006e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
  Process kworker/u:0 (pid: 5, threadinfo ffff88002ce6c000, task ffff88002ce55cc0)
  Stack:
   0000000000000246 ffff88002ce55cc0 ffff88002ce6dd58 ffff88001815dc00
   ffff8800185246c0 ffff88001811f618 ffff880029c29d18 ffff88001811f380
   ffff88002ce6dd50 ffffffff814757e4 ffff88002ce6dda0 ffffffff8106ac56
  Call Trace:
   cachefiles_lookup_object+0x78/0xd4 [cachefiles]
   fscache_lookup_object+0x131/0x16d [fscache]
   fscache_object_work_func+0x1bc/0x669 [fscache]
   process_one_work+0x186/0x298
   worker_thread+0xda/0x15d
   kthread+0x84/0x8c
   kernel_thread_helper+0x4/0x10
  RIP  cachefiles_walk_to_object+0x436/0x745 [cachefiles]
  ---[ end trace 1d481c9af1804caa ]---

I tested the uncaching by the following means:

 (1) Create a big file on my NFS server (104857600 bytes).

 (2) Read the file into the cache with md5sum on the NFS client.  Look in
     /proc/fs/fscache/stats:

	Pages  : mrk=25601 unc=0

 (3) Open the file for read/write ("bash 5<>/warthog/bigfile").  Look in proc
     again:

	Pages  : mrk=25601 unc=25601

Reported-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-and-Tested-by: Suresh Jayaraman <sjayaraman@suse.de>
cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-07 13:21:56 -07:00
Linus Torvalds 27a3b735b7 Merge branches 'core-urgent-for-linus', 'perf-urgent-for-linus' and 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  debugobjects: Fix boot crash when kmemleak and debugobjects enabled

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  jump_label: Fix jump_label update for modules
  oprofile, x86: Fix race in nmi handler while starting counters

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Disable (revert) SCHED_LOAD_SCALE increase
  sched, cgroups: Fix MIN_SHARES on 64-bit boxen
2011-07-07 13:17:45 -07:00
Linus Torvalds 85746e429f Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (31 commits)
  sctp: fix missing send up SCTP_SENDER_DRY_EVENT when subscribe it
  net: refine {udp|tcp|sctp}_mem limits
  vmxnet3: round down # of queues to power of two
  net: sh_eth: fix the parameter for the ETHER of SH7757
  net: sh_eth: fix cannot work half-duplex mode
  net: vlan: enable soft features regardless of underlying device
  vmxnet3: fix starving rx ring whenoc_skb kb fails
  bridge: Always flood broadcast packets
  greth: greth_set_mac_add would corrupt the MAC address.
  net: bind() fix error return on wrong address family
  natsemi: silence dma-debug warnings
  net: 8139too: Initial necessary vlan_features to support vlan
  Fix call trace when interrupts are disabled while sleeping function kzalloc is called
  qlge:Version change to v1.00.00.29
  qlge: Fix printk priority so chip fatal errors are always reported.
  qlge:Fix crash caused by mailbox execution on wedged chip.
  xfrm4: Don't call icmp_send on local error
  ipv4: Don't use ufo handling on later transformed packets
  xfrm: Remove family arg from xfrm_bundle_ok
  ipv6: Don't put artificial limit on routing table size.
  ...
2011-07-07 13:16:21 -07:00
Ben Greear d18a90dd85 slub: Add method to verify memory is not freed
This is for tracking down suspect memory usage.

Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
2011-07-07 22:17:08 +03:00
Mat Martineau fadd192e81 Bluetooth: Remove L2CAP busy queue
The ERTM receive buffer is now handled in a way that does not require
the busy queue and the associated polling code.

Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-07-07 15:29:06 -03:00
Mat Martineau e328140fda Bluetooth: Use event-driven approach for handling ERTM receive buffer
This change moves most L2CAP ERTM receive buffer handling out of the
L2CAP core and in to the socket code.  It's up to the higher layer
(the socket code, in this case) to tell the core when its buffer is
full or has space available.  The recv op should always accept
incoming ERTM data or else the connection will go down.

Within the socket layer, an skb that does not fit in the socket
receive buffer will be temporarily stored.  When the socket is read
from, that skb will be placed in the receive buffer if possible.  Once
adequate buffer space becomes available, the L2CAP core is informed
and the ERTM local busy state is cleared.

Receive buffer management for non-ERTM modes is unchanged.

Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-07-07 15:28:56 -03:00
Hans Verkuil 338e9e1ad5 [media] tuner-core/v4l2-subdev: document that the type field has to be filled in
The tuner ops g_frequency, g_tuner and s_tuner require that the tuner type
field is filled in. Document this.

The tuner-core doc is based on a patch from Mauro Carvalho Chehab <mchehab@redhat.com>.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-07 15:04:23 -03:00
Christoph Lameter 90810645f7 slab allocators: Provide generic description of alignment defines
Provide description for alignment defines.

Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
2011-07-07 21:04:12 +03:00
Hans Verkuil e206fc5e3d [media] v4l2-subdev.h: remove unused s_mode tuner op
s_mode is no longer used, so remove it.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-07 15:03:59 -03:00
Simon Guinot 659fb32d1b genirq: replace irq_gc_ack() with {set,clr}_bit variants (fwd)
This fixes a regression introduced by e59347a "arm: orion:
Use generic irq chip".

Depending on the device, interrupts acknowledgement is done by setting
or by clearing a dedicated register. Replace irq_gc_ack() with some
{set,clr}_bit variants allows to handle both cases.

Note that this patch affects the following SoCs: Davinci, Samsung and
Orion. Except for this last, the change is minor: irq_gc_ack() is just
renamed into irq_gc_ack_set_bit().

For the Orion SoCs, the edge GPIO interrupts support is currently
broken. irq_gc_ack() try to acknowledge a such interrupt by setting
the corresponding cause register bit. The Orion GPIO device expect the
opposite. To fix this issue, the irq_gc_ack_clr_bit() variant is used.

Tested on Network Space v2.

Reported-by: Joey Oravec <joravec@drewtech.com>
Signed-off-by: Simon Guinot <sguinot@lacie.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-07-07 16:02:26 +00:00
Steven Rostedt 43dd61c9a0 ftrace: Fix regression of :mod:module function enabling
The new code that allows different utilities to pick and choose
what functions they trace broke the :mod: hook that allows users
to trace only functions of a particular module.

The reason is that the :mod: hook bypasses the hash that is setup
to allow individual users to trace their own functions and uses
the global hash directly. But if the global hash has not been
set up, it will cause a bug:

echo '*:mod:radeon' > /sys/kernel/debug/set_ftrace_filter

produces:

 [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
 [drm:radeon_crtc_page_flip] *ERROR* failed to reserve new rbo buffer before flip
 BUG: unable to handle kernel paging request at ffffffff8160ec90
 IP: [<ffffffff810d9136>] add_hash_entry+0x66/0xd0
 PGD 1a05067 PUD 1a09063 PMD 80000000016001e1
 Oops: 0003 [#1] SMP Jul  7 04:02:28 phyllis kernel: [55303.858604] CPU 1
 Modules linked in: cryptd aes_x86_64 aes_generic binfmt_misc rfcomm bnep ip6table_filter hid radeon r8169 ahci libahci mii ttm drm_kms_helper drm video i2c_algo_bit intel_agp intel_gtt

 Pid: 10344, comm: bash Tainted: G        WC  3.0.0-rc5 #1 Dell Inc. Inspiron N5010/0YXXJJ
 RIP: 0010:[<ffffffff810d9136>]  [<ffffffff810d9136>] add_hash_entry+0x66/0xd0
 RSP: 0018:ffff88003a96bda8  EFLAGS: 00010246
 RAX: ffff8801301735c0 RBX: ffffffff8160ec80 RCX: 0000000000306ee0
 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff880137c92940
 RBP: ffff88003a96bdb8 R08: ffff880137c95680 R09: 0000000000000000
 R10: 0000000000000001 R11: 0000000000000000 R12: ffffffff81c9df78
 R13: ffff8801153d1000 R14: 0000000000000000 R15: 0000000000000000
 FS: 00007f329c18a700(0000) GS:ffff880137c80000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: ffffffff8160ec90 CR3: 000000003002b000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
 Process bash (pid: 10344, threadinfo ffff88003a96a000, task ffff88012fcfc470)
 Stack:
  0000000000000fd0 00000000000000fc ffff88003a96be38 ffffffff810d92f5
  ffff88011c4c4e00 ffff880000000000 000000000b69f4d0 ffffffff8160ec80
  ffff8800300e6f06 0000000081130295 0000000000000282 ffff8800300e6f00
 Call Trace:
  [<ffffffff810d92f5>] match_records+0x155/0x1b0
  [<ffffffff810d940c>] ftrace_mod_callback+0xbc/0x100
  [<ffffffff810dafdf>] ftrace_regex_write+0x16f/0x210
  [<ffffffff810db09f>] ftrace_filter_write+0xf/0x20
  [<ffffffff81166e48>] vfs_write+0xc8/0x190
  [<ffffffff81167001>] sys_write+0x51/0x90
  [<ffffffff815c7e02>] system_call_fastpath+0x16/0x1b
 Code: 48 8b 33 31 d2 48 85 f6 75 33 49 89 d4 4c 03 63 08 49 8b 14 24 48 85 d2 48 89 10 74 04 48 89 42 08 49 89 04 24 4c 89 60 08 31 d2
 RIP [<ffffffff810d9136>] add_hash_entry+0x66/0xd0
  RSP <ffff88003a96bda8>
 CR2: ffffffff8160ec90
 ---[ end trace a5d031828efdd88e ]---

Reported-by: Brian Marete <marete@toshnix.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-07 11:30:08 -04:00
Shirley Ma a6686f2f38 skbuff: skb supports zero-copy buffers
This patch adds userspace buffers support in skb shared info. A new
struct skb_ubuf_info is needed to maintain the userspace buffers
argument and index, a callback is used to notify userspace to release
the buffers once lower device has done DMA (Last reference to that skb
has gone).

If there is any userspace apps to reference these userspace buffers,
then these userspaces buffers will be copied into kernel. This way we
can prevent userspace apps from holding these userspace buffers too long.

Use destructor_arg to point to the userspace buffer info; a new tx flags
SKBTX_DEV_ZEROCOPY is added for zero-copy buffer check.

Signed-off-by: Shirley Ma <xma@...ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-07 04:41:13 -07:00
Shirley Ma 1cdebb4232 sock.h: Add a new sock zero-copy flag
Signed-off-by: Shirley Ma <xma@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-07 04:40:21 -07:00
Ingo Molnar b395fb36d5 Merge branch 'iommu-3.1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu into core/iommu 2011-07-07 12:58:28 +02:00
Andre Guedes eead27da60 Bluetooth: Add lmp_host_le_capable() macro
Since we have the extended LMP features properly implemented, we
should check the LMP_HOST_LE bit to know if the host supports LE.

Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-07-06 19:10:41 -03:00
Andre Guedes e6100a2541 Bluetooth: Add enable_le module parameter
This patch adds a new module parameter to enable/disable host LE
support. By default host LE support is disabled.

Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-07-06 19:10:37 -03:00
Andre Guedes f9b49306dc Bluetooth: Write LE Host Supported command
This patch adds a handler to Write LE Host Supported command complete
events. Once this commands has completed successfully, we should
read the extended LMP features and update the extfeatures field in
hci_dev.

Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-07-06 19:10:32 -03:00
Andre Guedes 971e3a4bbc Bluetooth: Add extfeatures to struct hci_dev
This new field holds the extended LMP features value. Some LE
mechanism such as discovery procedure needs to read the extended
LMP features to work properly.

Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-07-06 19:10:27 -03:00
Rob Herring 0e373639ad dt: add helper function to read u32 arrays
Rework of_property_read_u32 to read an array of values. Then
of_property_read_u32 becomes an inline with array size of 1.

Also make struct device_node ptr const.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-06 14:58:09 -06:00
Linus Torvalds de3796e77a Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (46 commits)
  [media] rc: call input_sync after scancode reports
  [media] imon: allow either proto on unknown 0xffdc
  [media] imon: auto-config ffdc 7e device
  [media] saa7134: fix raw IR timeout value
  [media] rc: fix ghost keypresses with certain hw
  [media] [staging] lirc_serial: allocate irq at init time
  [media] lirc_zilog: fix spinning rx thread
  [media] keymaps: fix table for pinnacle pctv hd devices
  [media] ite-cir: 8709 needs to use pnp resource 2
  [media] V4L: mx1-camera: fix uninitialized variable
  [media] omap_vout: Added check in reqbuf & mmap for buf_size allocation
  [media] OMAP_VOUT: Change hardcoded device node number to -1
  [media] OMAP_VOUTLIB: Fix wrong resizer calculation
  [media] uvcvideo: Disable the queue when failing to start
  [media] uvcvideo: Remove buffers from the queues when freeing
  [media] uvcvideo: Ignore entities for terminals with no supported format
  [media] v4l: Don't access media entity after is has been destroyed
  [media] media: omap3isp: fix a potential NULL deref
  [media] media: vb2: fix allocation failure check
  [media] media: vb2: reset queued_count value during queue reinitialization
  ...

Fix up trivial conflict in MAINTAINERS as per Mauro
2011-07-06 12:16:49 -07:00
Johannes Berg c68f4b892c mac80211: support GTK rekey offload
This adds the necessary mac80211 APIs to support
GTK rekey offload, mirroring the functionality
from cfg80211.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-06 15:05:43 -04:00
Johannes Berg e5497d766a cfg80211/nl80211: support GTK rekey offload
In certain circumstances, like WoWLAN scenarios,
devices may implement (partial) GTK rekeying on
the device to avoid waking up the host for it.

In order to successfully go through GTK rekeying,
the KEK, KCK and the replay counter are required.

Add API to let the supplicant hand the parameters
to the driver which may store it for future GTK
rekey operations.

Note that, of course, if GTK rekeying is done by
the device, the EAP frame must not be passed up
to userspace, instead a rekey event needs to be
sent to let userspace update its replay counter.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-06 15:05:42 -04:00
Johannes Berg 830af02f24 mac80211: allow driver to iterate keys
When in suspend/wowlan, devices might implement crypto
offload differently (more features), and might require
reprogramming keys for the WoWLAN (as it is the case
for Intel devices that use another uCode image). Thus
allow the driver to iterate all keys in this context.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-06 15:05:41 -04:00
Eric Dumazet dc7f9f6e88 net: sched: constify tcf_proto and tc_action
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-06 02:52:16 -07:00
David S. Miller 95ec3eb417 packet: Add 'cpu' fanout policy.
Unfortunately we have to use a real modulus here as
the multiply trick won't work as effectively with cpu
numbers as it does with rxhash values.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-06 01:56:38 -07:00
Shmulik Ravid 5b7f762674 dcbnl: Add CEE notification
This patch add an unsolicited notification of the DCBX negotiated
parameters for the CEE flavor of the DCBX protocol. The notification
message is identical to the aggregated CEE get operation and holds all
the pertinent local and peer information. The notification routine is
exported so it can be invoked by drivers supporting an embedded DCBX
stack.

Signed-off-by: Shmulik Ravid <shmulikr@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05 23:42:17 -07:00
Shmulik Ravid 37cf4d1a9b dcbnl: Aggregated CEE GET operation
The following couple of patches add dcbnl an unsolicited notification of
the the DCB configuration for the CEE flavor of the DCBX protocol. This
is useful when the user-mode DCB client is not responsible for
conducting and resolving the DCBX negotiation (either because the DCBX
stack is embedded in the HW or the negotiation is handled by another
agent in the host), but still needs to get the negotiated parameters.
This functionality already exists for the IEEE flavor of the DCBX
protocol and these patches add it to the older CEE flavor.

The first patch extends the CEE attribute GET operation to include not
only the peer information, but also all the pertinent local
configuration (negotiated parameters). The second patch adds and export
a CEE specific notification routine.

Signed-off-by: Shmulik Ravid <shmulikr@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05 23:42:17 -07:00
David S. Miller e12fe68ce3 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 2011-07-05 23:23:37 -07:00
David S. Miller 7736d33f42 packet: Add pre-defragmentation support for ipv4 fanouts.
The skb->rxhash cannot be properly computed if the
packet is a fragment.  To alleviate this, allow the
AF_PACKET client to ask for defragmentation to be
done at demux time.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05 22:34:52 -07:00
David S. Miller 595fc71baa ipv4: Add ip_defrag() agent IP_DEFRAG_AF_PACKET.
Elide the ICMP on frag queue timeouts unconditionally for
this user.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05 22:34:52 -07:00
David S. Miller dc99f60069 packet: Add fanout support.
Fanouts allow packet capturing to be demuxed to a set of AF_PACKET
sockets.  Two fanout policies are implemented:

1) Hashing based upon skb->rxhash

2) Pure round-robin

An AF_PACKET socket must be fully bound before it tries to add itself
to a fanout.  All AF_PACKET sockets trying to join the same fanout
must all have the same bind settings.

Fanouts are identified (within a network namespace) by a 16-bit ID.
The first socket to try to add itself to a fanout with a particular
ID, creates that fanout.  When the last socket leaves the fanout
(which happens only when the socket is closed), that fanout is
destroyed.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05 22:34:52 -07:00
David S. Miller 994635a137 Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 2011-07-05 18:22:39 -07:00
Lauro Ramos Venancio 23b7869c0f NFC: add the NFC socket raw protocol
This socket protocol is used to perform data exchange with NFC
targets.

Signed-off-by: Lauro Ramos Venancio <lauro.venancio@openbossa.org>
Signed-off-by: Aloisio Almeida Jr <aloisio.almeida@openbossa.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-05 15:26:58 -04:00
Aloisio Almeida Jr c7fe3b52c1 NFC: add NFC socket family
Signed-off-by: Lauro Ramos Venancio <lauro.venancio@openbossa.org>
Signed-off-by: Aloisio Almeida Jr <aloisio.almeida@openbossa.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-05 15:26:58 -04:00
Lauro Ramos Venancio 4d12b8b129 NFC: add nfc generic netlink interface
The NFC generic netlink interface exports the NFC control operations
to the user space.

Signed-off-by: Lauro Ramos Venancio <lauro.venancio@openbossa.org>
Signed-off-by: Aloisio Almeida Jr <aloisio.almeida@openbossa.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-05 15:26:57 -04:00
Lauro Ramos Venancio 3e256b8f8d NFC: add nfc subsystem core
The NFC subsystem core is responsible for providing the device driver
interface. It is also responsible for providing an interface to the control
operations and data exchange.

Signed-off-by: Lauro Ramos Venancio <lauro.venancio@openbossa.org>
Signed-off-by: Aloisio Almeida Jr <aloisio.almeida@openbossa.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-05 15:26:57 -04:00
Johannes Berg 2b4562dfd6 mac80211: allow driver to impose WoWLAN restrictions
If the driver can't support WoWLAN in the current
state, this patch allows it to return 1 from the
suspend callback to do the normal deconfiguration
instead of using suspend/resume calls. Note that
if it does this, resume won't be called.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-05 15:26:56 -04:00
Sergei Shtylyov 304e21bbea ssb: PCI revision ID register is 8-bit wide
The SSB code reads PCI revision ID register as 16-bit entity while the register
is actually 8-bit only (the next 8 bits are the programming interface register).
Fix the read and make the 'rev' field of 'struct ssb_boardinfo' 8-bit as well,
to match the register size.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-05 15:26:55 -04:00
Ingo Molnar 931da6137e Merge branch 'tip/perf/core-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into perf/core 2011-07-05 11:55:43 +02:00
Peter Zijlstra e4c2fb0d57 sched: Disable (revert) SCHED_LOAD_SCALE increase
Alex reported that commit c8b281161d ("sched: Increase
SCHED_LOAD_SCALE resolution") caused a power usage regression
under light load as it increases the number of load-balance
operations and keeps idle cpus from staying idle.

Time has run out to find the root cause for this release so
disable the feature for v3.0 until we can figure out what
causes the problem.

Reported-by: "Alex, Shi" <alex.shi@intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Nikhil Rao <ncrao@google.com>
Cc: Ming Lei <tom.leiming@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-m4onxn0sxnyn5iz9o88eskc3@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-05 11:28:18 +02:00
Linus Torvalds aababb9766 Merge branch 'fbdev-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-3.x
* 'fbdev-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-3.x:
  vesafb: fix memory leak
  fbdev: amba: Link fb device to its parent
  fsl-diu-fb: remove check for pixel clock ranges
  udlfb: Correct sub-optimal resolution selection.
  hecubafb: add module_put on error path in hecubafb_probe()
  sm501fb: fix section mismatch warning
  gx1fb: Fix section mismatch warnings
  fbdev: sh_mobile_meram: Correct pointer check for YCbCr chroma plane
2011-07-04 15:53:53 -07:00
Shawn Guo f09bc831b7 dt: add 'const' for of_property_read_string parameter **out_string
The existing dt codes usually call of_get_property to get a string
property and save it as a 'const char *'.  The patch adds'const' for
of_property_read_string parameter **out_string to make the converting
of existing code a little easier.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-03 23:47:22 -06:00
Joe Perches 234b921dbc netpoll: Remove unused EXPORT_SYMBOLs of netpoll_poll and netpoll_poll_dev
Unused symbols waste space.

Commit 0e34e93177
"(netpoll: add generic support for bridge and bonding devices)"
added the symbol more than a year ago with the promise of "future use".

Because it is so far unused, remove it for now.
It can be easily readded if or when it actually needs to be used.

cc: WANG Cong <amwang@redhat.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-03 20:02:07 -07:00
Linus Torvalds 8aa7ad9018 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: sb16 - Fix build errors on MIPS and others with 13bit ioctl size
  ALSA: hdspm - Fix compile warnings with PPC
  ALSA: cs5535 - Fix invalid big-endian conversions
  ALSA: HDMI - fix ELD monitor name length
  ALSA: atmel - update author email for ABDAC, AC97C and AT73C213
  ALSA: HDA: Add model=auto quirk for Acer Aspire 3830TG
  ALSA: HDA: Add a new Conexant codec ID (506c)
2011-07-02 09:26:53 -07:00
Rafael J. Wysocki 3d5c30367c PM: Rename clock management functions
The common PM clock management functions may be used for system
suspend/resume as well as for runtime PM, so rename them
accordingly.  Modify kerneldoc comments describing these functions
and kernel messages printed by them, so that they refer to power
management in general rather that to runtime PM.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-02 14:29:57 +02:00
Rafael J. Wysocki b7b95920aa PM: Allow the clocks management code to be used during system suspend
The common clocks management code in drivers/base/power/clock_ops.c
is going to be used during system-wide power transitions as well as
for runtime PM, so it shouldn't depend on CONFIG_PM_RUNTIME.
However, the suspend/resume functions provided by it for
CONFIG_PM_RUNTIME unset, to be used during system-wide power
transitions, should not behave in the same way as their counterparts
defined for CONFIG_PM_RUNTIME set, because in that case the clocks
are managed differently at run time.

The names of the functions still contain the word "runtime" after
this change, but that is going to be modified by a separate patch
later.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-02 14:29:56 +02:00
Rafael J. Wysocki d4f2d87a8b PM / Domains: Wakeup devices support for system sleep transitions
There is the problem how to handle devices set up to wake up the
system from sleep states during system-wide power transitions.
In some cases, those devices can be turned off entirely, because the
wakeup signals will be generated on their behalf anyway.  In some
other cases, they will generate wakeup signals if their clocks are
stopped, but only if power is not removed from them.  Finally, in
some cases, they can only generate wakeup signals if power is not
removed from them and their clocks are enabled.

To allow platform-specific code to decide whether or not to put
wakeup devices (and their PM domains) into low-power state during
system-wide transitions, such as system suspend, introduce a new
generic PM domain callback, .active_wakeup(), that will be used
during the "noirq" phase of system suspend and hibernation (after
image creation) to decide what to do with wakeup devices.
Specifically, if this callback is present and returns "true", the
generic PM domain code will not execute .stop_device() for the
given wakeup device and its PM domain won't be powered off.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Kevin Hilman <khilman@ti.com>
2011-07-02 14:29:56 +02:00
Rafael J. Wysocki 596ba34bcd PM / Domains: System-wide transitions support for generic domains (v5)
Make generic PM domains support system-wide power transitions
(system suspend and hibernation).  Add suspend, resume, freeze, thaw,
poweroff and restore callbacks to be associated with struct
generic_pm_domain objects and make pm_genpd_init() use them as
appropriate.

The new callbacks do nothing for devices belonging to power domains
that were powered down at run time (before the transition).  For the
other devices the action carried out depends on the type of the
transition.  During system suspend the power domain .suspend()
callback executes pm_generic_suspend() for the device, while the
PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq()
for it, stops it and eventually removes power from the PM domain it
belongs to (after all devices in the domain have been stopped and its
subdomains have been powered off).

During system resume the PM domain .resume_noirq() callback
restores power to the PM domain (when executed for it first time),
starts the device and executes pm_generic_resume_noirq() for it,
while the .resume() callback executes pm_generic_resume() for the
device.  Finally, the .complete() callback executes pm_runtime_idle()
for the device which should put it back into the suspended state if
its runtime PM usage count is equal to zero at that time.

The actions carried out during hibernation and resume from it are
analogous to the ones described above.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-02 14:29:56 +02:00
Rafael J. Wysocki e529192883 PM: Introduce generic "noirq" callback routines for subsystems (v2)
Introduce generic "noirq" power management callback routines for
subsystems in addition to the "regular" generic PM callback routines.

The new routines will be used, among other things, for implementing
system-wide PM transitions support for generic PM domains.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-02 14:29:55 +02:00
Rafael J. Wysocki f721889ff6 PM / Domains: Support for generic I/O PM domains (v8)
Introduce common headers, helper functions and callbacks allowing
platforms to use simple generic power domains for runtime power
management.

Introduce struct generic_pm_domain to be used for representing
power domains that each contain a number of devices and may be
parent domains or subdomains with respect to other power domains.
Among other things, this structure includes callbacks to be
provided by platforms for performing specific tasks related to
power management (i.e. ->stop_device() may disable a device's
clocks, while ->start_device() may enable them, ->power_off() is
supposed to remove power from the entire power domain
and ->power_on() is supposed to restore it).

Introduce functions that can be used as power domain runtime PM
callbacks, pm_genpd_runtime_suspend() and pm_genpd_runtime_resume(),
as well as helper functions for the initialization of a power
domain represented by a struct generic_power_domain object,
adding a device to or removing a device from it and adding or
removing subdomains.

Introduce configuration option CONFIG_PM_GENERIC_DOMAINS to be
selected by the platforms that want to use the new code.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-02 14:29:55 +02:00
Rafael J. Wysocki dc6e4e56e6 PM: subsys_data in struct dev_pm_info need not depend on RM_RUNTIME
The subsys_data field of struct dev_pm_info, introduced by commit
1d2b71f61b (PM / Runtime: Add subsystem
data field to struct dev_pm_info), is going to be used even if
CONFIG_PM_RUNTIME is not set, so move it from under the #ifdef.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-02 14:29:54 +02:00
Rafael J. Wysocki 564b905ab1 PM / Domains: Rename struct dev_power_domain to struct dev_pm_domain
The naming convention used by commit 7538e3db6e015e890825fbd9f86599b
(PM: Add support for device power domains), which introduced the
struct dev_power_domain type for representing device power domains,
evidently confuses some developers who tend to think that objects
of this type must correspond to "power domains" as defined by
hardware, which is not the case.  Namely, at the kernel level, a
struct dev_power_domain object can represent arbitrary set of devices
that are mutually dependent power management-wise and need not belong
to one hardware power domain.  To avoid that confusion, rename struct
dev_power_domain to struct dev_pm_domain and rename the related
pointers in struct device and struct pm_clk_notifier_block from
pwr_domain to pm_domain.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Kevin Hilman <khilman@ti.com>
2011-07-02 14:29:54 +02:00
David S. Miller 957c665f37 ipv6: Don't put artificial limit on routing table size.
IPV6, unlike IPV4, doesn't have a routing cache.

Routing table entries, as well as clones made in response
to route lookup requests, all live in the same table.  And
all of these things are together collected in the destination
cache table for ipv6.

This means that routing table entries count against the garbage
collection limits, even though such entries cannot ever be reclaimed
and are added explicitly by the administrator (rather than being
created in response to lookups).

Therefore it makes no sense to count ipv6 routing table entries
against the GC limits.

Add a DST_NOCOUNT destination cache entry flag, and skip the counting
if it is set.  Use this flag bit in ipv6 when adding routing table
entries.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-01 17:30:43 -07:00
Thomas Graf 4e985adaa5 rtnl: provide link dump consistency info
This patch adds a change sequence counter to each net namespace
which is bumped whenever a netdevice is added or removed from
the list. If such a change occurred while a link dump took place,
the dump will have the NLM_F_DUMP_INTR flag set in the first
message which has been interrupted and in all subsequent messages
of the same dump.

Note that links may still be modified or renamed while a dump is
taking place but we can guarantee for userspace to receive a
complete list of links and not miss any.

Testing:
I have added 500 VLAN netdevices to make sure the dump is split
over multiple messages. Then while continuously dumping links in
one process I also continuously deleted and re-added a dummy
netdevice in another process. Multiple dumps per seconds have
had the NLM_F_DUMP_INTR flag set.

I guess we can wait for Johannes patch to hit net-next via the
wireless tree.  I just wanted to give this some testing right away.

Signed-off-by: Thomas Graf <tgraf@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-01 15:39:53 -07:00
Gustavo F. Padovan f8c1fbdb76 Bluetooth: Clean up unused struct hci_conn items
priv and lock are never used

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-07-01 16:10:06 -03:00
Ingo Molnar 1ecc818c51 Merge branch 'sched/core-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing into sched/core 2011-07-01 13:20:51 +02:00
Avi Kivity 26ca5c11fb perf: export perf_event_refresh() to modules
KVM needs one-shot samples, since a PMC programmed to -X will fire after X
events and then again after 2^40 events (i.e. variable period).

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1309362157-6596-4-git-send-email-avi@redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-01 11:06:40 +02:00
Avi Kivity 4dc0da8696 perf: Add context field to perf_event
The perf_event overflow handler does not receive any caller-derived
argument, so many callers need to resort to looking up the perf_event
in their local data structure.  This is ugly and doesn't scale if a
single callback services many perf_events.

Fix by adding a context parameter to perf_event_create_kernel_counter()
(and derived hardware breakpoints APIs) and storing it in the perf_event.
The field can be accessed from the callback as event->overflow_handler_context.
All callers are updated.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1309362157-6596-2-git-send-email-avi@redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-01 11:06:38 +02:00
Peter Zijlstra 89d6c0b5bd perf, arch: Add generic NODE cache events
Add a NODE level to the generic cache events which is used to measure
local vs remote memory accesses. Like all other cache events, an
ACCESS is HIT+MISS, if there is no way to distinguish between reads
and writes do reads only etc..

The below needs filling out for !x86 (which I filled out with
unsupported events).

I'm fairly sure ARM can leave it like that since it doesn't strike me as
an architecture that even has NUMA support. SH might have something since
it does appear to have some NUMA bits.

Sparc64, PowerPC and MIPS certainly want a good look there since they
clearly are NUMA capable.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: David Miller <davem@davemloft.net>
Cc: Anton Blanchard <anton@samba.org>
Cc: David Daney <ddaney@caviumnetworks.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1303508226.4865.8.camel@laptop
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-01 11:06:38 +02:00
Stephane Eranian efc9f05df2 perf_events: Update Intel extra regs shared constraints management
This patch improves the code managing the extra shared registers
used for offcore_response events on Intel Nehalem/Westmere. The
idea is to use static allocation instead of dynamic allocation.
This simplifies greatly the get and put constraint routines for
those events.

The patch also renames per_core to shared_regs because the same
data structure gets used whether or not HT is on. When HT is
off, those events still need to coordination because they use
a extra MSR that has to be shared within an event group.

Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110606145703.GA7258@quad
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-01 11:06:36 +02:00
Peter Zijlstra a7ac67ea02 perf: Remove the perf_output_begin(.sample) argument
Since only samples call perf_output_sample() its much saner (and more
correct) to put the sample logic in there than in the
perf_output_begin()/perf_output_end() pair.

Saves a useless argument, reduces conditionals and shrinks
struct perf_output_handle, win!

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-2crpvsx3cqu67q3zqjbnlpsc@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-01 11:06:35 +02:00
Peter Zijlstra a8b0ca17b8 perf: Remove the nmi parameter from the swevent and overflow interface
The nmi parameter indicated if we could do wakeups from the current
context, if not, we would set some state and self-IPI and let the
resulting interrupt do the wakeup.

For the various event classes:

  - hardware: nmi=0; PMI is in fact an NMI or we run irq_work_run from
    the PMI-tail (ARM etc.)
  - tracepoint: nmi=0; since tracepoint could be from NMI context.
  - software: nmi=[0,1]; some, like the schedule thing cannot
    perform wakeups, and hence need 0.

As one can see, there is very little nmi=1 usage, and the down-side of
not using it is that on some platforms some software events can have a
jiffy delay in wakeup (when arch_irq_work_raise isn't implemented).

The up-side however is that we can remove the nmi parameter and save a
bunch of conditionals in fast paths.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Michael Cree <mcree@orcon.net.nz>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Cc: Anton Blanchard <anton@samba.org>
Cc: Eric B Munson <emunson@mgebm.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Don Zickus <dzickus@redhat.com>
Link: http://lkml.kernel.org/n/tip-agjev8eu666tvknpb3iaj0fg@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-01 11:06:35 +02:00
Richard Kennedy 28009ce4a8 perf: Remove 64-bit alignment padding from perf_event_context
Reorder perf_event_context to remove 8 bytes of 64 bit alignment padding
shrinking its size to 192 bytes, allowing it to fit into a smaller slab
and use one fewer cache lines.

Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1307460819.1950.5.camel@castor.rsk
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-01 11:06:32 +02:00
David S. Miller 60c2ce2b4f Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 2011-07-01 01:52:02 -07:00
Thomas Gleixner 01898e3e29 i8253: Cleanup outb/inb magic
Remove the hysterical outb/inb_pit defines and use outb_p/inb_p in the
code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/20110609130622.348437125@linutronix.de
2011-07-01 10:37:15 +02:00
Thomas Gleixner e6220bdc94 i8253: Create common clockevent implementation
arm, mips and x86 implement i8253 based clockevents. All the same code
copied. Create a common implementation in drivers/clocksource/i8253.c.

About time to rename drivers/clocksource/ to something else.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/20110609130621.921710458@linutronix.de
2011-07-01 10:37:14 +02:00
Ingo Molnar 10e6962765 Merge commit 'v3.0-rc5' into perf/core
Merge reason: Pick up the latest fixes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-01 10:28:46 +02:00
Amit Kumar Salecha 0209bcd4d9 net: add external loopback test in ethtool self test
External loopback test can be performed by application without any driver
support on normal Ethernet cards.
But on CNA devices, where multiple functions share same physical port.
Here internal loopback test and external loopback test can be initiated by
multiple functions at same time. To co exist all functions, firmware need
to regulate what test can be run by which function. So before performing external
loopback test, command need to send to firmware, which will quiescent other functions.

User may not want to run external loopback test always. As special cable need to be
connected for this test.
So adding explicit flag in ethtool self test, which will specify interface
to perform external loopback test.
 ETH_TEST_FL_EXTERNAL_LB: Application set to request external loopback test
 ETH_TEST_FL_EXTERNAL_LB_DONE: Driver ack if test performed

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Reviewed-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-30 22:32:49 -07:00
Joe Perches e1447d8d8d Bluetooth: Add bt_printk
Add a local logging function to emit bluetooth specific
messages.  Using vsprintf extension %pV saves code/text
space.

Convert the current BT_INFO and BT_ERR macros to use bt_printk.
Remove __func__ from BT_ERR macro (and the uses).
Prefix "Bluetooth: " to BT_ERR
Remove __func__ from BT_DBG as function can be prefixed when
using dynamic_debug.

With allyesconfig:

   text    data     bss     dec     hex filename
 129956    8632   36096  174684   2aa5c drivers/bluetooth/built-in.o.new2
 134402    8632   36064  179098   2bb9a drivers/bluetooth/built-in.o.old
  14778    1012    3408   19198    4afe net/bluetooth/bnep/built-in.o.new2
  15067    1012    3408   19487    4c1f net/bluetooth/bnep/built-in.o.old
 346595   19163   86080  451838   6e4fe net/bluetooth/built-in.o.new2
 353751   19163   86064  458978   700e2 net/bluetooth/built-in.o.old
  18483    1172    4264   23919    5d6f net/bluetooth/cmtp/built-in.o.new2
  18927    1172    4264   24363    5f2b net/bluetooth/cmtp/built-in.o.old
  19237    1172    5152   25561    63d9 net/bluetooth/hidp/built-in.o.new2
  19581    1172    5152   25905    6531 net/bluetooth/hidp/built-in.o.old
  59461    3884   14464   77809   12ff1 net/bluetooth/rfcomm/built-in.o.new2
  61206    3884   14464   79554   136c2 net/bluetooth/rfcomm/built-in.o.old

with x86 defconfig (and just bluetooth):

$ size net/bluetooth/built-in.o.defconfig.*
   text    data     bss     dec     hex filename
  66358     933     100   67391   1073f net/bluetooth/built-in.o.defconfig.new
  66643     933     100   67676   1085c net/bluetooth/built-in.o.defconfig.old

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-30 19:17:12 -03:00
Joe Perches e175072f37 Bluetooth: Rename function bt_err to bt_to_errno
Make it easier to use more normal logging styles later.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-30 18:44:08 -03:00
Thomas Abraham a3b853633d dt: add helper functions to read u32 and string property values
Add helper functions to retrieve unsigned integer and string property
values from properties of a device node. These helper functions can be
used to lookup a property in a device node, perform error checking and
read the property value.

[grant.likely@secretlab.ca: Proposal and initial implementation]
Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
[grant.likely: some word smithing and be more defensive validating the string]
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-30 13:02:10 -06:00
John W. Linville df2cbe4075 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem 2011-06-30 13:34:06 -04:00
Joe Perches 08b8bfc1c6 xen: Add __attribute__((format(printf... where appropriate
Use the compiler to verify printf formats and arguments.

Fix fallout.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-06-30 12:14:40 -04:00
John W. Linville 690b0cacb6 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into for-davem 2011-06-30 11:26:04 -04:00
Takashi Iwai 4f3c7a18d9 ALSA: sb16 - Fix build errors on MIPS and others with 13bit ioctl size
One of ioctl definition in sound/sb16_csp.h contains the data size
over 8kB, and this causes build errors on architectures like MIPS,
which define _IOC_SIZEBITS=13.

For avoiding this build errors but keeping the compatibility, manually
expand with _IOC() instead of using _IOW() for the problematic ioctl.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-30 15:33:57 +02:00
Mr Dash Four 131ad62d8f netfilter: add SELinux context support to AUDIT target
In this revision the conversion of secid to SELinux context and adding it
to the audit log is moved from xt_AUDIT.c to audit.c with the aid of a
separate helper function - audit_log_secctx - which does both the conversion
and logging of SELinux context, thus also preventing internal secid number
being leaked to userspace. If conversion is not successful an error is raised.

With the introduction of this helper function the work done in xt_AUDIT.c is
much more simplified. It also opens the possibility of this helper function
being used by other modules (including auditd itself), if desired. With this
addition, typical (raw auditd) output after applying the patch would be:

type=NETFILTER_PKT msg=audit(1305852240.082:31012): action=0 hook=1 len=52 inif=? outif=eth0 saddr=10.1.1.7 daddr=10.1.2.1 ipid=16312 proto=6 sport=56150 dport=22 obj=system_u:object_r:ssh_client_packet_t:s0
type=NETFILTER_PKT msg=audit(1306772064.079:56): action=0 hook=3 len=48 inif=eth0 outif=? smac=00:05:5d:7c:27:0b dmac=00:02:b3:0a:7f:81 macproto=0x0800 saddr=10.1.2.1 daddr=10.1.1.7 ipid=462 proto=6 sport=22 dport=3561 obj=system_u:object_r:ssh_server_packet_t:s0

Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Mr Dash Four <mr.dash.four@googlemail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2011-06-30 13:31:57 +02:00
Jens Axboe 7b28afe01a Merge branch 'for-3.0-important' of git://git.drbd.org/linux-2.6-drbd into for-linus 2011-06-30 10:10:50 +02:00
Lars Ellenberg 15b493d11f drbd: fix limit define, we support 1 PiByte now
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-06-30 09:23:45 +02:00
Arik Nemtsov 39df600aa6 mac80211: propagate information about STA WME support down
Add a memeber to the ieee80211_sta structure to indicate whether the STA
supports WME.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29 15:11:00 -04:00
John Bonesio a6b0919140 of/gpio: Add new method for getting gpios under different property names
This patch adds a new routine, of_get_named_gpio_flags(), which takes the
property name as a parameter rather than assuming "gpios".

of_get_gpio_flags() is modified to call of_get_named_gpio_flags() with "gpios"
as the property parameter.

Signed-off-by: John Bonesio <bones@secretlab.ca>
[grant.likely: Tidied up whitespace and tweaked kerneldoc comments.]
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-28 15:39:50 -06:00
Linus Torvalds c89b857ce6 Merge branch 'driver-core-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6
* 'driver-core-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
  Connector: Correctly set the error code in case of success when dispatching receive callbacks
  Connector: Set the CN_NETLINK_USERS correctly
  pti: PTI semantics fix in pti_tty_cleanup.
  pti: ENXIO error case memory leak PTI fix.
  pti: double-free security PTI fix
  drivers:misc: ti-st: fix skipping of change remote baud
  drivers/base/platform.c: don't mark platform_device_register_resndata() as __init_or_module
  st_kim: Handle case of no device found for ID 0
  firmware: fix GOOGLE_SMI kconfig dependency warning
2011-06-28 11:15:36 -07:00
Linus Torvalds 04b905942b Merge branch 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6
* 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6:
  serial: bcm63xx_uart: fix irq storm after rx fifo overrun.
  amba pl011: platform data for reg lockup and glitch v2
  amba pl011: workaround for uart registers lockup
  tty: n_gsm: improper skb_pull() use was leaking framed data
  tty: n_gsm: Fixed logic to decode break signal from modem status
  TTY: ntty, add one more sanity check
  TTY: ldisc, do not close until there are readers
  8250: Fix capabilities when changing the port type
  8250_pci: Fix missing const from merges
  ARM: SAMSUNG: serial: Fix on handling of one clock source for UART
  serial: ioremap warning fix for jsm driver.
  8250_pci: add -ENODEV code for Intel EG20T PCH
2011-06-28 11:14:55 -07:00
John W. Linville 3be3fdb58a Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
Conflicts:
	drivers/net/wireless/iwlwifi/iwl-tx.c
2011-06-28 13:56:21 -04:00
Jan Kara 08142579b6 mm: fix assertion mapping->nrpages == 0 in end_writeback()
Under heavy memory and filesystem load, users observe the assertion
mapping->nrpages == 0 in end_writeback() trigger.  This can be caused by
page reclaim reclaiming the last page from a mapping in the following
race:

	CPU0				CPU1
  ...
  shrink_page_list()
    __remove_mapping()
      __delete_from_page_cache()
        radix_tree_delete()
					evict_inode()
					  truncate_inode_pages()
					    truncate_inode_pages_range()
					      pagevec_lookup() - finds nothing
					  end_writeback()
					    mapping->nrpages != 0 -> BUG
        page->mapping = NULL
        mapping->nrpages--

Fix the problem by doing a reliable check of mapping->nrpages under
mapping->tree_lock in end_writeback().

Analyzed by Jay <jinshan.xiong@whamcloud.com>, lost in LKML, and dug out
by Miklos Szeredi <mszeredi@suse.de>.

Cc: Jay <jinshan.xiong@whamcloud.com>
Cc: Miklos Szeredi <mszeredi@suse.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-27 18:00:13 -07:00
Chris Metcalf 507c5f1224 include/linux/compat.h: declare compat_sys_sendmmsg()
This is required for tilegx to be able to use the compat unistd.h header
where compat_sys_sendmmsg() is now mentioned.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-27 18:00:13 -07:00
Hugh Dickins d9d90e5eb7 tmpfs: add shmem_read_mapping_page_gfp
Although it is used (by i915) on nothing but tmpfs, read_cache_page_gfp()
is unsuited to tmpfs, because it inserts a page into pagecache before
calling the filesystem's ->readpage: tmpfs may have pages in swapcache
which only it knows how to locate and switch to filecache.

At present tmpfs provides a ->readpage method, and copes with this by
copying pages; but soon we can simplify it by removing its ->readpage.
Provide shmem_read_mapping_page_gfp() now, ready for that transition,

Export shmem_read_mapping_page_gfp() and add it to list in shmem_fs.h,
with shmem_read_mapping_page() inline for the common mapping_gfp case.

(shmem_read_mapping_page_gfp or shmem_read_cache_page_gfp? Generally the
read_mapping_page functions use the mapping's ->readpage, and the
read_cache_page functions use the supplied filler, so I think
read_cache_page_gfp was slightly misnamed.)

Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-27 18:00:12 -07:00
Hugh Dickins 94c1e62df4 tmpfs: take control of its truncate_range
2.6.35's new truncate convention gave tmpfs the opportunity to control
its file truncation, no longer enforced from outside by vmtruncate().
We shall want to build upon that, to handle pagecache and swap together.

Slightly redefine the ->truncate_range interface: let it now be called
between the unmap_mapping_range()s, with the filesystem responsible for
doing the truncate_inode_pages_range() from it - just as the filesystem
is nowadays responsible for doing that from its ->setattr.

Let's rename shmem_notify_change() to shmem_setattr().  Instead of
calling the generic truncate_setsize(), bring that code in so we can
call shmem_truncate_range() - which will later be updated to perform its
own variant of truncate_inode_pages_range().

Remove the punch_hole unmap_mapping_range() from shmem_truncate_range():
now that the COW's unmap_mapping_range() comes after ->truncate_range,
there is no need to call it a third time.

Export shmem_truncate_range() and add it to the list in shmem_fs.h, so
that i915_gem_object_truncate() can call it explicitly in future; get
this patch in first, then update drm/i915 once this is available (until
then, i915 will just be doing the truncate_inode_pages() twice).

Though introduced five years ago, no other filesystem is implementing
->truncate_range, and its only other user is madvise(,,MADV_REMOVE): we
expect to convert it to fallocate(,FALLOC_FL_PUNCH_HOLE,,) shortly,
whereupon ->truncate_range can be removed from inode_operations -
shmem_truncate_range() will help i915 across that transition too.

Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-27 18:00:12 -07:00
Hugh Dickins 072441e21d mm: move shmem prototypes to shmem_fs.h
Before adding any more global entry points into shmem.c, gather such
prototypes into shmem_fs.h.  Remove mm's own declarations from swap.h,
but for now leave the ones in mm.h: because shmem_file_setup() and
shmem_zero_setup() are called from various places, and we should not
force other subsystems to update immediately.

Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-27 18:00:12 -07:00
Vitaliy Ivanov 4d258b25d9 Fix some kernel-doc warnings
Fix 'make htmldocs' warnings:

  Warning(/include/linux/hrtimer.h:153): No description found for parameter 'clockid'
  Warning(/include/linux/device.h:604): Excess struct/union/enum/typedef member 'of_match' description in 'device'
  Warning(/include/net/sock.h:349): Excess struct/union/enum/typedef member 'sk_rmem_alloc' description in 'sock'

Signed-off-by: Vitaliy Ivanov <vitalivanov@gmail.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-27 16:06:19 -07:00
Suresh Siddha 192d885742 x86, mtrr: use stop_machine APIs for doing MTRR rendezvous
MTRR rendezvous sequence is not implemened using stop_machine() before, as this
gets called both from the process context aswell as the cpu online paths
(where the cpu has not come online and the interrupts are disabled etc).

Now that we have a new stop_machine_from_inactive_cpu() API, use it for
rendezvous during mtrr init of a logical processor that is coming online.

For the rest (runtime MTRR modification, system boot, resume paths), use
stop_machine() to implement the rendezvous sequence. This will consolidate and
cleanup the code.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Link: http://lkml.kernel.org/r/20110623182057.076997177@sbsiddha-MOBL3.sc.intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-06-27 15:17:13 -07:00
Tejun Heo f740e6cd0c stop_machine: implement stop_machine_from_inactive_cpu()
Currently, mtrr wants stop_machine functionality while a CPU is being
brought up.  As stop_machine() requires the calling CPU to be active,
mtrr implements its own stop_machine using stop_one_cpu() on each
online CPU.  This doesn't only unnecessarily duplicate complex logic
but also introduces a possibility of deadlock when it races against
the generic stop_machine().

This patch implements stop_machine_from_inactive_cpu() to serve such
use cases.  Its functionality is basically the same as stop_machine();
however, it should be called from a CPU which isn't active and doesn't
depend on working scheduling on the calling CPU.

This is achieved by using busy loops for synchronization and
open-coding stop_cpus queuing and waiting with direct invocation of
fn() for local CPU inbetween.

Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20110623182056.982526827@sbsiddha-MOBL3.sc.intel.com
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-06-27 15:17:08 -07:00
Linus Torvalds a64227b085 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc:
  mmc: queue: bring discard_granularity/alignment into line with SCSI
  mmc: queue: append partition subname to queue thread name
  mmc: core: make erase timeout calculation allow for gated clock
  mmc: block: switch card to User Data Area when removing the block driver
  mmc: sdio: reset card during power_restore
  mmc: cb710: fix #ifdef HAVE_EFFICIENT_UNALIGNED_ACCESS
  mmc: sdhi: DMA slave ID 0 is invalid
  mmc: tmio: fix regression in TMIO_MMC_WRPROTECT_DISABLE handling
  mmc: omap_hsmmc: use original sg_len for dma_unmap_sg
  mmc: omap_hsmmc: fix ocr mask usage
  mmc: sdio: fix runtime PM path during driver removal
  mmc: Add PCI fixup quirks for Ricoh 1180:e823 reader
  mmc: sdhi: fix module unloading
  mmc: of_mmc_spi: add NO_IRQ define to of_mmc_spi.c
  mmc: vub300: fix null dereferences in error handling
2011-06-27 14:55:43 -07:00
KAMEZAWA Hiroyuki c6830c2260 Fix node_start/end_pfn() definition for mm/page_cgroup.c
commit 21a3c96 uses node_start/end_pfn(nid) for detection start/end
of nodes. But, it's not defined in linux/mmzone.h but defined in
/arch/???/include/mmzone.h which is included only under
CONFIG_NEED_MULTIPLE_NODES=y.

Then, we see
  mm/page_cgroup.c: In function 'page_cgroup_init':
  mm/page_cgroup.c:308: error: implicit declaration of function 'node_start_pfn'
  mm/page_cgroup.c:309: error: implicit declaration of function 'node_end_pfn'

So, fixiing page_cgroup.c is an idea...

But node_start_pfn()/node_end_pfn() is a very generic macro and
should be implemented in the same manner for all archs.
(m32r has different implementation...)

This patch removes definitions of node_start/end_pfn() in each archs
and defines a unified one in linux/mmzone.h. It's not under
CONFIG_NEED_MULTIPLE_NODES, now.

A result of macro expansion is here (mm/page_cgroup.c)

for !NUMA
 start_pfn = ((&contig_page_data)->node_start_pfn);
  end_pfn = ({ pg_data_t *__pgdat = (&contig_page_data); __pgdat->node_start_pfn + __pgdat->node_spanned_pages;});

for NUMA (x86-64)
  start_pfn = ((node_data[nid])->node_start_pfn);
  end_pfn = ({ pg_data_t *__pgdat = (node_data[nid]); __pgdat->node_start_pfn + __pgdat->node_spanned_pages;});

Changelog:
 - fixed to avoid using "nid" twice in node_end_pfn() macro.

Reported-and-acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Reported-and-tested-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-27 14:13:09 -07:00
Suresh Siddha 6d3321e8e2 x86, mtrr: lock stop machine during MTRR rendezvous sequence
MTRR rendezvous sequence using stop_one_cpu_nowait() can potentially
happen in parallel with another system wide rendezvous using
stop_machine(). This can lead to deadlock (The order in which
works are queued can be different on different cpu's. Some cpu's
will be running the first rendezvous handler and others will be running
the second rendezvous handler. Each set waiting for the other set to join
for the system wide rendezvous, leading to a deadlock).

MTRR rendezvous sequence is not implemented using stop_machine() as this
gets called both from the process context aswell as the cpu online paths
(where the cpu has not come online and the interrupts are disabled etc).
stop_machine() works with only online cpus.

For now, take the stop_machine mutex in the MTRR rendezvous sequence that
gets called from an online cpu (here we are in the process context
and can potentially sleep while taking the mutex). And the MTRR rendezvous
that gets triggered during cpu online doesn't need to take this stop_machine
lock (as the stop_machine() already ensures that there is no cpu hotplug
going on in parallel by doing get_online_cpus())

    TBD: Pursue a cleaner solution of extending the stop_machine()
         infrastructure to handle the case where the calling cpu is
         still not online and use this for MTRR rendezvous sequence.

fixes: https://bugzilla.novell.com/show_bug.cgi?id=672008

Reported-by: Vadim Kotelnikov <vadimuzzz@inbox.ru>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Link: http://lkml.kernel.org/r/20110623182056.807230326@sbsiddha-MOBL3.sc.intel.com
Cc: stable@kernel.org # 2.6.35+, backport a week or two after this gets more testing in mainline
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-06-27 14:00:46 -07:00
Johannes Berg 04b7dcf979 wireless: unify QoS control field definitions
Move all that mac80211 has into the generic
ieee80211.h header file and use them. At the
same time move them from mask+shift to just
bits and rename them for consistent names.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27 15:09:39 -04:00
Arik Nemtsov a66b98db57 mac80211: fix rx->key NULL dereference during mic failure
Sometimes when reporting a MIC failure rx->key may be unset. This
code path is hit when receiving a packet meant for a multicast
address, and decryption is performed in HW.

Fortunately, the failing key_idx is not used for anything up to
(and including) usermode, so we allow ourselves to drop it on the
way up when a key cannot be retrieved.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Cc: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27 14:45:25 -04:00
Oleg Nesterov 0347e17739 ptrace: ptrace_reparented() should check same_thread_group()
ptrace_reparented() naively does parent != real_parent, this means
it returns true even if the tracer _is_ the real parent. This is per
process thing, not per-thread. The only reason ->real_parent can
point to the non-leader thread is that we have __WNOTHREAD.

Change it to check !same_thread_group(parent, real_parent).

It has two callers, and in both cases the current check does not
look right.

exit_notify: we should respect ->exit_signal if the exiting leader
is traced by any thread from the parent thread group. It is the
child of the whole group, and we are going to send the signal to
the whole group.

wait_task_zombie: without __WNOTHREAD do_wait() should do the same
for any thread, only sys_ptrace() is "bound" to the single thread.
However do_wait(WEXITED) succeeds but does not release a traced
natural child unless the caller is the tracer.

Test-case:

	void *tfunc(void *arg)
	{
		assert(ptrace(PTRACE_ATTACH, (long)arg, 0,0) == 0);
		pause();
		return NULL;
	}

	int main(void)
	{
		pthread_t thr;
		pid_t pid, stat, ret;

		pid = fork();
		if (!pid) {
			pause();
			assert(0);
		}

		assert(pthread_create(&thr, NULL, tfunc, (void*)(long)pid) == 0);

		assert(waitpid(-1, &stat, 0) == pid);
		assert(WIFSTOPPED(stat));

		kill(pid, SIGKILL);

		assert(waitpid(-1, &stat, 0) == pid);
		assert(WIFSIGNALED(stat) && WTERMSIG(stat) == SIGKILL);

		ret = waitpid(pid, &stat, 0);
		if (ret < 0)
			return 0;

		printf("WTF? %d is dead, but: wait=%d stat=%x\n",
				pid, ret, stat);

		return 1;
	}

Note that the main thread simply does

	pid = fork();
	kill(pid, SIGKILL);

and then without the patch wait4(WEXITED) succeeds twice and reports
WTERMSIG(stat) == SIGKILL.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
2011-06-27 20:30:10 +02:00
Oleg Nesterov 087806b128 redefine thread_group_leader() as exit_signal >= 0
Change de_thread() to set old_leader->exit_signal = -1. This is
good for the consistency, it is no longer the leader and all
sub-threads have exit_signal = -1 set by copy_process(CLONE_THREAD).

And this allows us to micro-optimize thread_group_leader(), it can
simply check exit_signal >= 0. This also makes sense because we
should move ->group_leader from task_struct to signal_struct.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
2011-06-27 20:30:10 +02:00
Oleg Nesterov e550f14dc6 kill task_detached()
Upadate the last user of task_detached(), wait_task_zombie(), to
use thread_group_leader() and kill task_detached().

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
2011-06-27 20:30:09 +02:00
Oleg Nesterov 8677347378 make do_notify_parent() __must_check, update the callers
Change other callers of do_notify_parent() to check the value it
returns, this makes the subsequent task_detached() unnecessary.
Mark do_notify_parent() as __must_check.

Use thread_group_leader() instead of !task_detached() to check
if we need to notify the real parent in wait_task_zombie().

Remove the stale comment in release_task(). "just for sanity" is
no longer true, we have to set EXIT_DEAD to avoid the races with
do_wait().

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
2011-06-27 20:30:09 +02:00
Oleg Nesterov 45cdf5cc07 kill tracehook_notify_death()
Kill tracehook_notify_death(), reimplement the logic in its caller,
exit_notify().

Also, change the exec_id's check to use thread_group_leader() instead
of task_detached(), this is more clear. This logic only applies to
the exiting leader, a sub-thread must never change its exit_signal.

Note: when the traced group leader exits the exit_signal-or-SIGCHLD
logic looks really strange:

	- we notify the tracer even if !thread_group_empty() but
	   do_wait(WEXITED) can't work until all threads exit

	- if the tracer is real_parent, it is not clear why can't
	  we use ->exit_signal event if !thread_group_empty()

-v2: do not try to fix the 2nd oddity to avoid the subtle behavior
     change mixed with reorganization, suggested by Tejun.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
2011-06-27 20:30:08 +02:00
Oleg Nesterov 53c8f9f199 make do_notify_parent() return bool
- change do_notify_parent() to return a boolean, true if the task should
  be reaped because its parent ignores SIGCHLD.

- update the only caller which checks the returned value, exit_notify().

This temporary uglifies exit_notify() even more, will be cleanuped by
the next change.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
2011-06-27 20:30:08 +02:00
Linus Torvalds 4d362ad280 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: Remove unneeded version.h includes from sound/
  ASoC: pxa-ssp: Correct check for stream presence
  ASoC: imx: add missing module informations
  ASoC: imx: Remove unused Kconfig SND_MXC_SOC_SSI entry
  ALSA: HDA: Pinfix quirk for HP Z200 Workstation
  ALSA: VIA HDA: Create a master amplifier control for VT1718S.
  ALSA: VIA HDA: Mute/unmute mixer conncted to Headphone for VT1718S.
  ALSA: VIA HDA: Modify initial verbs list for VT1718S.
  ALSA: hda - Remove ALC268 model override for CPR2000
  ALSA: HDA: Remove quirk for an HP device
  ASoC: Remove unused and about to be broken SND_SOC_CUSTOM I/O bus
2011-06-25 07:23:27 -07:00
Vitaliy Ivanov c6af9c406c net: wimax: Remove of unused 'rfkill_input' pointer
Seems like this was not cleaned during the 'rfkill: rewrite' checkin
19d337dff9.

Signed-off-by: Vitaliy Ivanov <vitalivanov@gmail.com>
Acked-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-24 17:50:44 -07:00
John W. Linville 36099365c7 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
Conflicts:
	drivers/net/wireless/rtlwifi/pci.c
	include/linux/netlink.h
2011-06-24 15:25:51 -04:00
Linus Torvalds 5220cc9382 Merge branch 'for-linus' of git://git.kernel.dk/linux-block
* 'for-linus' of git://git.kernel.dk/linux-block:
  block: add REQ_SECURE to REQ_COMMON_MASK
  block: use the passed in @bdev when claiming if partno is zero
  block: Add __attribute__((format(printf...) and fix fallout
  block: make disk_block_events() properly wait for work cancellation
  block: remove non-syncing __disk_block_events() and fold it into disk_block_events()
  block: don't use non-syncing event blocking in disk_check_events()
  cfq-iosched: fix locking around ioc->ioc_data assignment
2011-06-24 08:42:35 -07:00
Takashi Iwai e093811857 Merge branch 'fix/asoc' into for-linus 2011-06-24 12:36:25 +02:00
Timur Tabi 39785eb1d3 fsl-diu-fb: remove check for pixel clock ranges
The Freescale DIU framebuffer driver defines two constants, MIN_PIX_CLK and
MAX_PIX_CLK, that are supposed to represent the lower and upper limits of
the pixel clock.  These values, however, are true only for one platform
clock rate (533MHz) and only for the MPC8610.  So the actual range for
the pixel clock is chip-specific, which means the current values are almost
always wrong.  The chance of an out-of-range pixel clock being used are also
remote.

Rather than try to detect an out-of-range clock in the DIU driver, we depend
on the board-specific pixel clock function (e.g. p1022ds_set_pixel_clock)
to clamp the pixel clock to a supported value.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-24 17:08:49 +09:00
David S. Miller d18cd551d1 net: Fix build failures due to ip_is_fragment()
It needs to be available even when CONFIG_INET is not set.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-23 21:28:52 -07:00
David Wagner 01dc9cc314 UBI: clarify the volume notification types' doc
I realized the new descriptions of ADDED and REMOVED could also be
misleading: they can also be triggered after using a userland util
(ubi{mk,rm}vol).

Artem: amend the commentaries

Signed-off-by David Wagner <david.wagner@free-electrons.com>
Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
2011-06-23 17:40:07 +03:00
Linus Torvalds 68d0080f1e Merge branch 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6
* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  PCI / PM: Block races between runtime PM and system sleep
  PM / Domains: Update documentation
  PM / Runtime: Handle clocks correctly if CONFIG_PM_RUNTIME is unset
  PM: Fix async resume following suspend failure
  PM: Free memory bitmaps if opening /dev/snapshot fails
  PM: Rename dev_pm_info.in_suspend to is_prepared
  PM: Update documentation regarding sysdevs
  PM / Runtime: Update doc: usage count no longer incremented across system PM
2011-06-22 21:08:52 -07:00
Frederic Weisbecker d902db1eb6 sched: Generalize sleep inside spinlock detection
The sleeping inside spinlock detection is actually used
for more general sleeping inside atomic sections
debugging: preemption disabled, rcu read side critical
sections, interrupts, interrupt disabled, etc...

Change the name of the config and its help section to
reflect its more general role.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
2011-06-23 00:44:38 +02:00
Gabor Juhos 7d95847c9b ath9k: add external_reset callback to ath9k_platfom_data for AR9330
The patch adds a callback to ath9k_platform_data. If the
callback is provided by the platform code, then it can be
used to hard reset the WMAC device.

The callback is required for doing a hard reset of the AR9330
chips to get them working again after a hang.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22 16:09:57 -04:00
Gabor Juhos 3762561aa8 ath9k: add MAC revision detection for AR9330
The AR9330 1.0 and 1.1 are using the same revision,
thus it is not possible to distinguish the two chips.
The platform setup code can distinguish the chips based
on the SoC revision.

Add a callback function to ath9k_platform_data in order
to allow getting the revision number from the platform code.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22 16:09:49 -04:00
Johannes Berg 670dc2833d netlink: advertise incomplete dumps
Consider the following situation:
 * a dump that would show 8 entries, four in the first
   round, and four in the second
 * between the first and second rounds, 6 entries are
   removed
 * now the second round will not show any entry, and
   even if there is a sequence/generation counter the
   application will not know

To solve this problem, add a new flag NLM_F_DUMP_INTR
to the netlink header that indicates the dump wasn't
consistent, this flag can also be set on the MSG_DONE
message that terminates the dump, and as such above
situation can be detected.

To achieve this, add a sequence counter to the netlink
callback struct. Of course, netlink code still needs
to use this new functionality. The correct way to do
that is to always set cb->seq when a dumpit callback
is invoked and call nl_dump_check_consistent() for
each new message. The core code will also call this
function for the final MSG_DONE message.

To make it usable with generic netlink, a new function
genlmsg_nlhdr() is needed to obtain the netlink header
from the genetlink user header.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22 16:09:45 -04:00
John W. Linville 1c1236e3af Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/padovan/bluetooth-next-2.6 2011-06-22 16:06:58 -04:00
Tejun Heo 06d984737b ptrace: s/tracehook_tracer_task()/ptrace_parent()/
tracehook.h is on the way out.  Rename tracehook_tracer_task() to
ptrace_parent() and move it from tracehook.h to ptrace.h.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: John Johansen <john.johansen@canonical.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-22 19:26:29 +02:00
Tejun Heo 4b9d33e6d8 ptrace: kill clone/exec tracehooks
At this point, tracehooks aren't useful to mainline kernel and mostly
just add an extra layer of obfuscation.  Although they have comments,
without actual in-kernel users, it is difficult to tell what are their
assumptions and they're actually trying to achieve.  To mainline
kernel, they just aren't worth keeping around.

This patch kills the following clone and exec related tracehooks.

	tracehook_prepare_clone()
	tracehook_finish_clone()
	tracehook_report_clone()
	tracehook_report_clone_complete()
	tracehook_unsafe_exec()

The changes are mostly trivial - logic is moved to the caller and
comments are merged and adjusted appropriately.

The only exception is in check_unsafe_exec() where LSM_UNSAFE_PTRACE*
are OR'd to bprm->unsafe instead of setting it, which produces the
same result as the field is always zero on entry.  It also tests
p->ptrace instead of (p->ptrace & PT_PTRACED) for consistency, which
also gives the same result.

This doesn't introduce any behavior change.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-22 19:26:29 +02:00
Tejun Heo a288eecce5 ptrace: kill trivial tracehooks
At this point, tracehooks aren't useful to mainline kernel and mostly
just add an extra layer of obfuscation.  Although they have comments,
without actual in-kernel users, it is difficult to tell what are their
assumptions and they're actually trying to achieve.  To mainline
kernel, they just aren't worth keeping around.

This patch kills the following trivial tracehooks.

* Ones testing whether task is ptraced.  Replace with ->ptrace test.

	tracehook_expect_breakpoints()
	tracehook_consider_ignored_signal()
	tracehook_consider_fatal_signal()

* ptrace_event() wrappers.  Call directly.

	tracehook_report_exec()
	tracehook_report_exit()
	tracehook_report_vfork_done()

* ptrace_release_task() wrapper.  Call directly.

	tracehook_finish_release_task()

* noop

	tracehook_prepare_release_task()
	tracehook_report_death()

This doesn't introduce any behavior change.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-22 19:26:28 +02:00
Tejun Heo f3c04b934d ptrace: move SIGTRAP on exec(2) logic to ptrace_event()
Move SIGTRAP on exec(2) logic from tracehook_report_exec() to
ptrace_event().  This is part of changes to make ptrace_event()
smarter and handle ptrace event related details in one place.

This doesn't introduce any behavior change.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-22 19:26:28 +02:00
Tejun Heo 643ad8388e ptrace: introduce ptrace_event_enabled() and simplify ptrace_event() and tracehook_prepare_clone()
This patch implements ptrace_event_enabled() which tests whether a
given PTRACE_EVENT_* is enabled and use it to simplify ptrace_event()
and tracehook_prepare_clone().

PT_EVENT_FLAG() macro is added which calculates PT_TRACE_* flag from
PTRACE_EVENT_*.  This is used to define PT_TRACE_* flags and by
ptrace_event_enabled() to find the matching flag.

This is used to make ptrace_event() and tracehook_prepare_clone()
simpler.

* ptrace_event() callers were responsible for providing mask to test
  whether the event was enabled.  This patch implements
  ptrace_event_enabled() and make ptrace_event() drop @mask and
  determine whether the event is enabled from @event.  Note that
  @event is constant and this conversion doesn't add runtime overhead.

  All conversions except tracehook_report_clone_complete() are
  trivial.  tracehook_report_clone_complete() used to use 0 for @mask
  (always enabled) but now tests whether the specified event is
  enabled.  This doesn't cause any behavior difference as it's
  guaranteed that the event specified by @trace is enabled.

* tracehook_prepare_clone() now only determines which event is
  applicable and use ptrace_event_enabled() for enable test.

This doesn't introduce any behavior change.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-22 19:26:28 +02:00