On Thu, Aug 05, 2010 at 07:01:21PM -0700, Linus Torvalds wrote:
> On Thu, Aug 5, 2010 at 6:40 PM, Herbert Xu <herbert@gondor.hengli.com.au> wrote:
> >
> > -config CRYPTO_MANAGER_TESTS
> > - bool "Run algolithms' self-tests"
> > - default y
> > - depends on CRYPTO_MANAGER2
> > +config CRYPTO_MANAGER_DISABLE_TESTS
> > + bool "Disable run-time self tests"
> > + depends on CRYPTO_MANAGER2 && EMBEDDED
>
> Why do you still want to force-enable those tests? I was going to
> complain about the "default y" anyway, now I'm _really_ complaining,
> because you've now made it impossible to disable those tests. Why?
As requested, this patch sets the default to y and removes the
EMBEDDED dependency.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch fixes a serious bug in the test disabling patch where
it can cause an spurious load of the cryptomgr module even when
it's compiled in.
It also negates the test disabling option so that its absence
causes tests to be enabled.
The Kconfig option is also now behind EMBEDDED.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
By default, CONFIG_CRYPTO_MANAGER_TESTS will be enabled and thus
self-tests will still run, but it is now possible to disable them
to gain some time during bootup.
Signed-off-by: Alexander Shishkin <virtuoso@slind.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The PCOMP Kconfig entry current allows the following combination
which is illegal:
ZLIB=y
PCOMP=y
ALGAPI=m
ALGAPI2=y
MANAGER=m
MANAGER2=m
This patch fixes this by adding PCOMP2 so that PCOMP can select
ALGAPI to propagate the setting to MANAGER2.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds a parallel crypto template that takes a crypto
algorithm and converts it to process the crypto transforms in
parallel. For the moment only aead algorithms are supported.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
CLMUL-NI accelerated GHASH should be turned off on non-x86_64 machine.
Reported-by: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
PCLMULQDQ is used to accelerate the most time-consuming part of GHASH,
carry-less multiplication. More information about PCLMULQDQ can be
found at:
http://software.intel.com/en-us/articles/carry-less-multiplication-and-its-usage-for-computing-the-gcm-mode/
Because PCLMULQDQ changes XMM state, its usage must be enclosed with
kernel_fpu_begin/end, which can be used only in process context, the
acceleration is implemented as crypto_ahash. That is, request in soft
IRQ context will be defered to the cryptd kernel thread.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds VMAC (a fast MAC) support into crypto framework.
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Joseph Cihula <joseph.cihula@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
What about something like this? It defaults the CPRNG to m and makes FIPS
dependent on the CPRNG. That way you get a module build by default, but you can
change it to y manually during config and still satisfy the dependency, and if
you select N it disables FIPS as well. I rather like that better than making
FIPS a tristate. I just tested it out here and it seems to work well. Let me
know what you think
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This reverts commit 215ccd6f55.
It causes CPRNG and everything selected by it to be built-in
whenever FIPS is enabled. The problem is that it is selecting
a tristate from a bool, which is usually not what is intended.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove the dedicated GHASH implementation in GCM, and uses the GHASH
digest algorithm instead. This will make GCM uses hardware accelerated
GHASH implementation automatically if available.
ahash instead of shash interface is used, because some hardware
accelerated GHASH implementation needs asynchronous interface.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
GHASH is implemented as a shash algorithm. The actual implementation
is copied from gcm.c. This makes it possible to add
architecture/hardware accelerated GHASH implementation.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The ANSI CPRNG has no dependence on FIPS support. FIPS support however,
requires the use of the CPRNG. Adjust that depedency relationship in Kconfig.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Because kernel_fpu_begin() and kernel_fpu_end() operations are too
slow, the performance gain of general mode implementation + aes-aesni
is almost all compensated.
The AES-NI support for more modes are implemented as follow:
- Add a new AES algorithm implementation named __aes-aesni without
kernel_fpu_begin/end()
- Use fpu(<mode>(AES)) to provide kenrel_fpu_begin/end() invoking
- Add <mode>(AES) ablkcipher, which uses cryptd(fpu(<mode>(AES))) to
defer cryption to cryptd context in soft_irq context.
Now the ctr, lrw, pcbc and xts support are added.
Performance testing based on dm-crypt shows that cryption time can be
reduced to 50% of general mode implementation + aes-aesni implementation.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Blkcipher touching FPU need to be enclosed by kernel_fpu_begin() and
kernel_fpu_end(). If they are invoked in cipher algorithm
implementation, they will be invoked for each block, so that
performance will be hurt, because they are "slow" operations. This
patch implements "fpu" template, which makes these operations to be
invoked for each request.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The current "comp" crypto interface supports one-shot (de)compression only,
i.e. the whole data buffer to be (de)compressed must be passed at once, and
the whole (de)compressed data buffer will be received at once.
In several use-cases (e.g. compressed file systems that store files in big
compressed blocks), this workflow is not suitable.
Furthermore, the "comp" type doesn't provide for the configuration of
(de)compression parameters, and always allocates workspace memory for both
compression and decompression, which may waste memory.
To solve this, add a "pcomp" partial (de)compression interface that provides
the following operations:
- crypto_compress_{init,update,final}() for compression,
- crypto_decompress_{init,update,final}() for decompression,
- crypto_{,de}compress_setup(), to configure (de)compression parameters
(incl. allocating workspace memory).
The (de)compression methods take a struct comp_request, which was mimicked
after the z_stream object in zlib, and contains buffer pointer and length
pairs for input and output.
The setup methods take an opaque parameter pointer and length pair. Parameters
are supposed to be encoded using netlink attributes, whose meanings depend on
the actual (name of the) (de)compression algorithm.
Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
keventd_wq has potential starvation problem, so use dedicated
kcrypto_wq instead.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use dedicated workqueue for crypto subsystem
A dedicated workqueue named kcrypto_wq is created to be used by crypto
subsystem. The system shared keventd_wq is not suitable for
encryption/decryption, because of potential starvation problem.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Intel AES-NI is a new set of Single Instruction Multiple Data (SIMD)
instructions that are going to be introduced in the next generation of
Intel processor, as of 2009. These instructions enable fast and secure
data encryption and decryption, using the Advanced Encryption Standard
(AES), defined by FIPS Publication number 197. The architecture
introduces six instructions that offer full hardware support for
AES. Four of them support high performance data encryption and
decryption, and the other two instructions support the AES key
expansion procedure.
The white paper can be downloaded from:
http://softwarecommunity.intel.com/isn/downloads/intelavx/AES-Instructions-Set_WP.pdf
AES may be used in soft_irq context, but MMX/SSE context can not be
touched safely in soft_irq context. So in_interrupt() is checked, if
in IRQ or soft_irq context, the general x86_64 implementation are used
instead.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch changes sha512 and sha384 to the new shash interface.
Signed-off-by: Adrian-Ken Rueegsegger <ken@codelabs.ch>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch changes michael_mic to the new shash interface.
Signed-off-by: Adrian-Ken Rueegsegger <ken@codelabs.ch>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch changes wp512, wp384 and wp256 to the new shash interface.
Signed-off-by: Adrian-Ken Rueegsegger <ken@codelabs.ch>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch changes tgr192, tgr160 and tgr128 to the new shash interface.
Signed-off-by: Adrian-Ken Rueegsegger <ken@codelabs.ch>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch changes sha256 and sha224 to the new shash interface.
Signed-off-by: Adrian-Ken Rueegsegger <ken@codelabs.ch>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch changes md5 to the new shash interface.
Signed-off-by: Adrian-Ken Rueegsegger <ken@codelabs.ch>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch changes md4 to the new shash interface.
Signed-off-by: Adrian-Ken Rueegsegger <ken@codelabs.ch>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch changes sha1 to the new shash interface.
Signed-off-by: Adrian-Ken Rueegsegger <ken@codelabs.ch>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch swaps the role of libcrc32c and crc32c. Previously
the implementation was in libcrc32c and crc32c was a wrapper.
Now the code is in crc32c and libcrc32c just calls the crypto
layer.
The reason for the change is to tap into the algorithm selection
capability of the crypto API so that optimised implementations
such as the one utilising Intel's CRC32C instruction can be
used where available.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If we have at least one algorithm built-in then it no longer makes
sense to have the testing framework, and hence cryptomgr to be a
module. It should be either on or off, i.e., built-in or disabled.
This just happens to stop a potential runaway modprobe loop that
seems to trigger on at least one distro.
With fixes from Evgeniy Polyakov.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch makes the IV generators use the new RNG interface so
that the user can pick an RNG other than the default get_random_bytes.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds a random number generator interface as well as a
cryptographic pseudo-random number generator based on AES. It is
meant to be used in cases where a deterministic CPRNG is required.
One of the first applications will be as an input in the IPsec IV
generation process.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the ability to turn FIPS-compliant mode on or off at boot
In order to be FIPS compliant, several check may need to be preformed that may
be construed as unusefull in a non-compliant mode. This patch allows us to set
a kernel flag incating that we are running in a fips-compliant mode from boot
up. It also exports that mode information to user space via a sysctl
(/proc/sys/crypto/fips_enabled).
Tested successfully by me.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch moves the newly created alg_test infrastructure into
cryptomgr. This shall allow us to use it for testing at algorithm
registrations.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
From NHM processor onward, Intel processors can support hardware accelerated
CRC32c algorithm with the new CRC32 instruction in SSE 4.2 instruction set.
The patch detects the availability of the feature, and chooses the most proper
way to calculate CRC32c checksum.
Byte code instructions are used for compiler compatibility.
No MMX / XMM registers is involved in the implementation.
Signed-off-by: Austin Zhang <austin.zhang@intel.com>
Signed-off-by: Kent Liu <kent.liu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch reimplements crc32c using the ahash interface. This
allows one tfm to be used by an unlimited number of users provided
that they all use the same key (which all current crc32c users do).
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds a cryptographic pseudo-random number generator
based on CTR(AES-128). It is meant to be used in cases where a
deterministic CPRNG is required.
One of the first applications will be as an input in the IPsec IV
generation process.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds asynchronous hash support to crypto daemon.
Signed-off-by: Loc Ho <lho@amcc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds Kconfig entries for RIPEMD-256 and RIPEMD-320.
Signed-off-by: Adrian-Ken Rueegsegger <rueegsegger@swiss-it.ch>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds Kconfig entries for RIPEMD-128 and RIPEMD-160.
Signed-off-by: Adrian-Ken Rueegsegger <rueegsegger@swiss-it.ch>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ciphers, block modes, name it, are grouped together and sorted.
Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Implement CTS wrapper for CBC mode required for support of AES
encryption support for Kerberos (rfc3962).
Signed-off-by: Kevin Coffman <kwc@citi.umich.edu>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch fixes the following build error caused by commit
3631c650c495d61b1dabf32eb26b46873636e918:
<-- snip -->
...
LD .tmp_vmlinux1
crypto/built-in.o: In function `skcipher_null_crypt':
crypto_null.c:(.text+0x3d14): undefined reference to `blkcipher_walk_virt'
crypto_null.c:(.text+0x3d14): relocation truncated to fit: R_MIPS_26 against `blkcipher_walk_virt'
crypto/built-in.o: In function `$L32':
crypto_null.c:(.text+0x3d54): undefined reference to `blkcipher_walk_done'
crypto_null.c:(.text+0x3d54): relocation truncated to fit: R_MIPS_26 against `blkcipher_walk_done'
crypto/built-in.o:(.data+0x2e8): undefined reference to `crypto_blkcipher_type'
make[1]: *** [.tmp_vmlinux1] Error 1
<-- snip -->
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Building latest git fails with the following error:
ERROR: "crypto_alloc_ablkcipher" [crypto/tcrypt.ko] undefined!
This appears to happen because CONFIG_CRYPTO_TEST is set while
CONFIG_CRYPTO_BLKCIPHER is not.
The following patch fixes the problem for me.
Signed-off-by: Frederik Deweerdt <frederik.deweerdt@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This is the x86-64 version of the Salsa20 stream cipher algorithm. The
original assembly code came from
<http://cr.yp.to/snuffle/salsa20/amd64-3/salsa20.s>. It has been
reformatted for clarity.
Signed-off-by: Tan Swee Heng <thesweeheng@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch contains the salsa20-i586 implementation. The original
assembly code came from
<http://cr.yp.to/snuffle/salsa20/x86-pm/salsa20.s>. I have reformatted
it (added indents) so that it matches the other algorithms in
arch/x86/crypto.
Signed-off-by: Tan Swee Heng <thesweeheng@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that seqiv supports AEAD algorithms it needs to select the AEAD option.
Thanks to Erez Zadok for pointing out the problem.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds Counter with CBC-MAC (CCM) support.
RFC 3610 and NIST Special Publication 800-38C were referenced.
Signed-off-by: Joy Latten <latten@austin.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This generator generates an IV based on a sequence number by xoring it
with a salt. This algorithm is mainly useful for CTR and similar modes.
This patch also sets it as the default IV generator for ctr.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
With the impending addition of the givcipher type, both blkcipher and
ablkcipher algorithms will use it to create givcipher objects. As such
it no longer makes sense to split the system between ablkcipher and
blkcipher. In particular, both ablkcipher.c and blkcipher.c would need
to use the givcipher type which has to reside in ablkcipher.c since it
shares much code with it.
This patch merges the two Kconfig options as well as the modules into one.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
i get here:
----
LD vmlinux
SYSMAP System.map
SYSMAP .tmp_System.map
Building modules, stage 2.
MODPOST 226 modules
ERROR: "crypto_hash_type" [crypto/authenc.ko] undefined!
make[1]: *** [__modpost] Error 1
make: *** [modules] Error 2
---
which fails because crypto_hash_type is declared in crypto/hash.c. You might wanna
fix it like so:
Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add GCM/GMAC support to cryptoapi.
GCM (Galois/Counter Mode) is an AEAD mode of operations for any block cipher
with a block size of 16. The typical example is AES-GCM.
Signed-off-by: Mikko Herranen <mh1@iki.fi>
Reviewed-by: Mika Kukkonen <mika.kukkonen@nsn.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Resubmitting this patch which extends sha256_generic.c to support SHA-224 as
described in FIPS 180-2 and RFC 3874. HMAC-SHA-224 as described in RFC4231
is then supported through the hmac interface.
Patch includes test vectors for SHA-224 and HMAC-SHA-224.
SHA-224 chould be chosen as a hash algorithm when 112 bits of security
strength is required.
Patch generated against the 2.6.24-rc1 kernel and tested against
2.6.24-rc1-git14 which includes fix for scatter gather implementation for HMAC.
Signed-off-by: Jonathan Lynch <jonathan.lynch@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The setkey() function can be shared with the generic algorithm.
Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
NO other block mode is M by default.
Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The setkey() function can be shared with the generic algorithm.
Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch implements CTR mode for IPsec.
It is based off of RFC 3686.
Please note:
1. CTR turns a block cipher into a stream cipher.
Encryption is done in blocks, however the last block
may be a partial block.
A "counter block" is encrypted, creating a keystream
that is xor'ed with the plaintext. The counter portion
of the counter block is incremented after each block
of plaintext is encrypted.
Decryption is performed in same manner.
2. The CTR counterblock is composed of,
nonce + IV + counter
The size of the counterblock is equivalent to the
blocksize of the cipher.
sizeof(nonce) + sizeof(IV) + sizeof(counter) = blocksize
The CTR template requires the name of the cipher
algorithm, the sizeof the nonce, and the sizeof the iv.
ctr(cipher,sizeof_nonce,sizeof_iv)
So for example,
ctr(aes,4,8)
specifies the counterblock will be composed of 4 bytes
from a nonce, 8 bytes from the iv, and 4 bytes for counter
since aes has a blocksize of 16 bytes.
3. The counter portion of the counter block is stored
in big endian for conformance to rfc 3686.
Signed-off-by: Joy Latten <latten@austin.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
XTS currently considered to be the successor of the LRW mode by the IEEE1619
workgroup. LRW was discarded, because it was not secure if the encyption key
itself is encrypted with LRW.
XTS does not have this problem. The implementation is pretty straightforward,
a new function was added to gf128mul to handle GF(128) elements in ble format.
Four testvectors from the specification
http://grouper.ieee.org/groups/1619/email/pdf00086.pdf
were added, and they verify on my system.
Signed-off-by: Rik Snel <rsnel@cube.dyndns.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds the authenc algorithm which constructs an AEAD algorithm
from an asynchronous block cipher and a hash. The construction is done
by concatenating the encrypted result from the cipher with the output
from the hash, as is used by the IPsec ESP protocol.
The authenc algorithm exists as a template with four parameters:
authenc(auth, authsize, enc, enckeylen).
The authentication algorithm, the authentication size (i.e., truncating
the output of the authentication algorithm), the encryption algorithm,
and the encryption key length. Both the size field and the key length
field are in bytes. For example, AES-128 with SHA1-HMAC would be
represented by
authenc(hmac(sha1), 12, cbc(aes), 16)
The key for the authenc algorithm is the concatenation of the keys for
the authentication algorithm with the encryption algorithm. For the
above example, if a key of length 36 bytes is given, then hmac(sha1)
would receive the first 20 bytes while the last 16 would be given to
cbc(aes).
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds crypto_aead which is the interface for AEAD
(Authenticated Encryption with Associated Data) algorithms.
AEAD algorithms perform authentication and encryption in one
step. Traditionally users (such as IPsec) would use two
different crypto algorithms to perform these. With AEAD
this comes down to one algorithm and one operation.
Of course if traditional algorithms were used we'd still
be doing two operations underneath. However, real AEAD
algorithms may allow the underlying operations to be
optimised as well.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for the SEED cipher (RFC4269).
This patch have been used in few VPN appliance vendors in Korea for
several years. And it was verified by KISA, who developed the
algorithm itself.
As its importance in Korean banking industry, it would be great
if linux incorporates the support.
Signed-off-by: Hye-Shik Chang <perky@FreeBSD.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Other options requiring specific block cipher algorithms already have
the appropriate select's.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The async_tx api provides methods for describing a chain of asynchronous
bulk memory transfers/transforms with support for inter-transactional
dependencies. It is implemented as a dmaengine client that smooths over
the details of different hardware offload engine implementations. Code
that is written to the api can optimize for asynchronous operation and the
api will fit the chain of operations to the available offload resources.
I imagine that any piece of ADMA hardware would register with the
'async_*' subsystem, and a call to async_X would be routed as
appropriate, or be run in-line. - Neil Brown
async_tx exploits the capabilities of struct dma_async_tx_descriptor to
provide an api of the following general format:
struct dma_async_tx_descriptor *
async_<operation>(..., struct dma_async_tx_descriptor *depend_tx,
dma_async_tx_callback cb_fn, void *cb_param)
{
struct dma_chan *chan = async_tx_find_channel(depend_tx, <operation>);
struct dma_device *device = chan ? chan->device : NULL;
int int_en = cb_fn ? 1 : 0;
struct dma_async_tx_descriptor *tx = device ?
device->device_prep_dma_<operation>(chan, len, int_en) : NULL;
if (tx) { /* run <operation> asynchronously */
...
tx->tx_set_dest(addr, tx, index);
...
tx->tx_set_src(addr, tx, index);
...
async_tx_submit(chan, tx, flags, depend_tx, cb_fn, cb_param);
} else { /* run <operation> synchronously */
...
<operation>
...
async_tx_sync_epilog(flags, depend_tx, cb_fn, cb_param);
}
return tx;
}
async_tx_find_channel() returns a capable channel from its pool. The
channel pool is organized as a per-cpu array of channel pointers. The
async_tx_rebalance() routine is tasked with managing these arrays. In the
uniprocessor case async_tx_rebalance() tries to spread responsibility
evenly over channels of similar capabilities. For example if there are two
copy+xor channels, one will handle copy operations and the other will
handle xor. In the SMP case async_tx_rebalance() attempts to spread the
operations evenly over the cpus, e.g. cpu0 gets copy channel0 and xor
channel0 while cpu1 gets copy channel 1 and xor channel 1. When a
dependency is specified async_tx_find_channel defaults to keeping the
operation on the same channel. A xor->copy->xor chain will stay on one
channel if it supports both operation types, otherwise the transaction will
transition between a copy and a xor resource.
Currently the raid5 implementation in the MD raid456 driver has been
converted to the async_tx api. A driver for the offload engines on the
Intel Xscale series of I/O processors, iop-adma, is provided in a later
commit. With the iop-adma driver and async_tx, raid456 is able to offload
copy, xor, and xor-zero-sum operations to hardware engines.
On iop342 tiobench showed higher throughput for sequential writes (20 - 30%
improvement) and sequential reads to a degraded array (40 - 55%
improvement). For the other cases performance was roughly equal, +/- a few
percentage points. On a x86-smp platform the performance of the async_tx
implementation (in synchronous mode) was also +/- a few percentage points
of the original implementation. According to 'top' on iop342 CPU
utilization drops from ~50% to ~15% during a 'resync' while the speed
according to /proc/mdstat doubles from ~25 MB/s to ~50 MB/s.
The tiobench command line used for testing was: tiobench --size 2048
--block 4096 --block 131072 --dir /mnt/raid --numruns 5
* iop342 had 1GB of memory available
Details:
* if CONFIG_DMA_ENGINE=n the asynchronous path is compiled away by making
async_tx_find_channel a static inline routine that always returns NULL
* when a callback is specified for a given transaction an interrupt will
fire at operation completion time and the callback will occur in a
tasklet. if the the channel does not support interrupts then a live
polling wait will be performed
* the api is written as a dmaengine client that requests all available
channels
* In support of dependencies the api implicitly schedules channel-switch
interrupts. The interrupt triggers the cleanup tasklet which causes
pending operations to be scheduled on the next channel
* Xor engines treat an xor destination address differently than a software
xor routine. To the software routine the destination address is an implied
source, whereas engines treat it as a write-only destination. This patch
modifies the xor_blocks routine to take a an explicit destination address
to mirror the hardware.
Changelog:
* fixed a leftover debug print
* don't allow callbacks in async_interrupt_cond
* fixed xor_block changes
* fixed usage of ASYNC_TX_XOR_DROP_DEST
* drop dma mapping methods, suggested by Chris Leech
* printk warning fixups from Andrew Morton
* don't use inline in C files, Adrian Bunk
* select the API when MD is enabled
* BUG_ON xor source counts <= 1
* implicitly handle hardware concerns like channel switching and
interrupts, Neil Brown
* remove the per operation type list, and distribute operation capabilities
evenly amongst the available channels
* simplify async_tx_find_channel to optimize the fast path
* introduce the channel_table_initialized flag to prevent early calls to
the api
* reorganize the code to mimic crypto
* include mm.h as not all archs include it in dma-mapping.h
* make the Kconfig options non-user visible, Adrian Bunk
* move async_tx under crypto since it is meant as 'core' functionality, and
the two may share algorithms in the future
* move large inline functions into c files
* checkpatch.pl fixes
* gpl v2 only correction
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-By: NeilBrown <neilb@suse.de>
The async_tx api tries to use a dma engine for an operation, but will fall
back to an optimized software routine otherwise. Xor support is
implemented using the raid5 xor routines. For organizational purposes this
routine is moved to a common area.
The following fixes are also made:
* rename xor_block => xor_blocks, suggested by Adrian Bunk
* ensure that xor.o initializes before md.o in the built-in case
* checkpatch.pl fixes
* mark calibrate_xor_blocks __init, Adrian Bunk
Cc: Adrian Bunk <bunk@stusta.de>
Cc: NeilBrown <neilb@suse.de>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Use menuconfigs instead of menus, so the whole menu can be disabled at once
instead of going through all options.
Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds the cryptd module which is a template that takes a
synchronous software crypto algorithm and converts it to an asynchronous
one by executing it in a kernel thread.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds the mid-level interface for asynchronous block ciphers.
It also includes a generic queueing mechanism that can be used by other
asynchronous crypto operations in future.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds the Kconfig entry for Camellia.
Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a crypto module to provide FCrypt encryption as used by RxRPC.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add PCBC crypto template support as used by RxRPC.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch moves the config options for the s390 crypto instructions
to the standard "Hardware crypto devices" menu. In addition some
cleanup has been done: use a flag for supported keylengths, add a
warning about machien limitation, return ENOTSUPP in case the
hardware has no support, remove superfluous printks and update
email addresses.
Signed-off-by: Jan Glauber <jan.glauber@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Main module, this implements the Liskov Rivest Wagner block cipher mode
in the new blockcipher API. The implementation is based on ecb.c.
The LRW-32-AES specification I used can be found at:
http://grouper.ieee.org/groups/1619/email/pdf00017.pdf
It implements the optimization specified as optional in the
specification, and in addition it uses optimized multiplication
routines from gf128mul.c.
Since gf128mul.[ch] is not tested on bigendian, this cipher mode
may currently fail badly on bigendian machines.
Signed-off-by: Rik Snel <rsnel@cube.dyndns.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A lot of cypher modes need multiplications in GF(2^128). LRW, ABL, GCM...
I use functions from this library in my LRW implementation and I will
also use them in my ABL (Arbitrary Block Length, an unencumbered (correct
me if I am wrong, wide block cipher mode).
Elements of GF(2^128) must be presented as u128 *, it encourages automatic
and proper alignment.
The library contains support for two different representations of GF(2^128),
see the comment in gf128mul.h. There different levels of optimization
(memory/speed tradeoff).
The code is based on work by Dr Brian Gladman. Notable changes:
- deletion of two optimization modes
- change from u32 to u64 for faster handling on 64bit machines
- support for 'bbe' representation in addition to the, already implemented,
'lle' representation.
- move 'inline void' functions from header to 'static void' in the
source file
- update to use the linux coding style conventions
The original can be found at:
http://fp.gladman.plus.com/AES/modes.vc8.19-06-06.zip
The copyright (and GPL statement) of the original author is preserved.
Signed-off-by: Rik Snel <rsnel@cube.dyndns.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This is core code of XCBC.
XCBC is an algorithm that forms a MAC algorithm out of a cipher algorithm.
For example, AES-XCBC-MAC is a MAC algorithm based on the AES cipher
algorithm.
Signed-off-by: Kazunori MIYAZAWA <miyazawa@linux-ipv6.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since cryptomgr is the only way to construct algorithm instances
for now it makes sense to let the templates depend on it as
otherwise it may be left off inadvertently.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch removes the old HMAC implementation now that nobody uses it
anymore.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch rewrites HMAC as a crypto template. This means that HMAC is no
longer a hard-coded part of the API. It's now a template that generates
standard digest algorithms like any other.
The old HMAC is preserved until all current users are converted.
The same structure can be used by other MACs such as AES-XCBC-MAC.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
The existing digest user interface is inadequate for support asynchronous
operations. For one it doesn't return a value to indicate success or
failure, nor does it take a per-operation descriptor which is essential
for the issuing of requests while other requests are still outstanding.
This patch is the first in a series of steps to remodel the interface
for asynchronous operations.
For the ease of transition the new interface will be known as "hash"
while the old one will remain as "digest".
This patch also changes sg_next to allow chaining.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds block cipher algorithms for S390. Once all users of the
old cipher type have been converted the existing CBC/ECB non-block cipher
operations will be removed.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds two block cipher algorithms, CBC and ECB. These
are implemented as templates on top of existing single-block cipher
algorithms. They invoke the single-block cipher through the new
encrypt_one/decrypt_one interface.
This also optimises the in-place encryption and decryption to remove
the cost of an IV copy each round.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds the new type of block ciphers. Unlike current cipher
algorithms which operate on a single block at a time, block ciphers
operate on an arbitrarily long linear area of data. As it is block-based,
it will skip any data remaining at the end which cannot form a block.
The block cipher has one major difference when compared to the existing
block cipher implementation. The sg walking is now performed by the
algorithm rather than the cipher mid-layer. This is needed for drivers
that directly support sg lists. It also improves performance for all
algorithms as it reduces the total number of indirect calls by one.
In future the existing cipher algorithm will be converted to only have
a single-block interface. This will be done after all existing users
have switched over to the new block cipher type.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The cryptomgr module is a simple manager of crypto algorithm instances.
It ensures that parameterised algorithms of the type tmpl(alg) (e.g.,
cbc(aes)) are always created.
This is meant to satisfy the needs for most users. For more complex
cases such as deeper combinations or multiple parameters, a netlink
module will be created which allows arbitrary expressions to be parsed
in user-space.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
The crypto API is made up of the part facing users such as IPsec and the
low-level part which is used by cryptographic entities such as algorithms.
This patch splits out the latter so that the two APIs are more clearly
delineated. As a bonus the low-level API can now be modularised if all
algorithms are built as modules.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch splits up the twofish crypto routine into a common part ( key
setup ) which will be uses by all twofish crypto modules ( generic-c , i586
assembler and x86_64 assembler ) and generic-c part. It also creates a new
header file which will be used by all 3 modules.
This eliminates all code duplication.
Correctness was verified with the tcrypt module and automated test scripts.
Signed-off-by: Joachim Fritschi <jfritschi@freenet.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
It makes no sense to build tcrypt into the kernel. In fact, now that
the driver init function's return status is being checked, it is in
fact harmful to do so.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As the Crypto API now allows multiple implementations to be registered
for the same algorithm, we no longer have to play tricks with Kconfig
to select the right AES implementation.
This patch sets the driver name and priority for all the AES
implementations and removes the Kconfig conditions on the C implementation
for AES.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Sanitize some s390 Kconfig options. We have ARCH_S390, ARCH_S390X,
ARCH_S390_31, 64BIT, S390_SUPPORT and COMPAT. Replace these 6 options by
S390, 64BIT and COMPAT.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add support for the hardware accelerated AES crypto algorithm.
Signed-off-by: Jan Glauber <jan.glauber@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add support for the hardware accelerated sha256 crypto algorithm.
Signed-off-by: Jan Glauber <jan.glauber@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Replace all references to z990 by s390 in the in-kernel crypto files in
arch/s390/crypto. The code is not specific to a particular machine (z990) but
to the s390 platform. Big diff, does nothing..
Signed-off-by: Jan Glauber <jan.glauber@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The XTEA implementation was incorrect due to a misinterpretation of
operator precedence. Because of the wide-spread nature of this
error, the erroneous implementation will be kept, albeit under the
new name of XETA.
Signed-off-by: Aaron Grothe <ajgrothe@yahoo.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implementation:
===============
The encrypt/decrypt code is based on an x86 implementation I did a while
ago which I never published. This unpublished implementation does
include an assembler based key schedule and precomputed tables. For
simplicity and best acceptance, however, I took Gladman's in-kernel code
for table generation and key schedule for the kernel port of my
assembler code and modified this code to produce the key schedule as
required by my assembler implementation. File locations and Kconfig are
kept similar to the i586 AES assembler implementation.
It may seem a little bit strange to use 32 bit I/O and registers in the
assembler implementation but this gives the best code size. My
implementation takes one instruction more per round compared to
Gladman's x86 assembler but it doesn't require any stack for local
variables or saved registers and it is less serialized than Gladman's
code.
Note that all comparisons to Gladman's code were done after my code was
implemented. I did only use FIPS PUB 197 for the implementation so my
implementation is independent work.
If anybody has a better assembler solution for x86_64 I'll be pleased to
have my code replaced with the better solution.
Testing:
========
The implementation passes the in-kernel crypto testing module and I'm
running it without any problems on my laptop where it is mainly used for
dm-crypt.
Microbenchmark:
===============
The microbenchmark was done in userspace with similar compile flags as
used during kernel compile.
Encrypt/decrypt is about 35% faster than the generic C implementation.
As the generic C as well as my assembler implementation are both table
I don't really expect that there is much room for further
improvements though I'll be glad to be corrected here.
The key schedule is about 5% slower than the generic C implementation.
This is due to the fact that some more work has to be done in the key
schedule routine to fit the schedule to the assembler implementation.
Code Size:
==========
Encrypt and decrypt are together about 2.1 Kbytes smaller than the
generic C implementation which is important with regard to L1 cache
usage. The key schedule routine is about 100 bytes larger than the
generic C implementation.
Data Size:
==========
There's no difference in data size requirements between the assembler
implementation and the generic C implementation.
License:
========
Gladmans's code is dual BSD/GPL whereas my assembler code is GPLv2 only
(I'm not going to change the license for my code). So I had to change
the module license for the x86_64 aes module from 'Dual BSD/GPL' to
'GPL' to reflect the most restrictive license within the module.
Signed-off-by: Andreas Steinmetz <ast@domdv.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
We want to make possible, for the user, to enable the i586 AES implementation.
This requires a restructure.
- Add a CONFIG_UML_X86 to notify that we are building a UML for i386.
- Rename CONFIG_64_BIT to CONFIG_64BIT as is used for all other archs
- Tell crypto/Kconfig that UML_X86 is as good as X86
- Tell it that it must exclude not X86_64 but 64BIT, which will give the
same results.
- Tell kbuild to descend down into arch/i386/crypto/ to build what's needed.
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Chuck Ebbert