Lai found that:
WARNING: CPU: 1 PID: 13 at arch/x86/kernel/smp.c:124 native_smp_send_reschedule+0x2d/0x4b()
...
migration_cpu_stop+0x1d/0x22
was caused by set_cpus_allowed_ptr() assuming that cpu_active_mask is
always a sub-set of cpu_online_mask.
This isn't true since 5fbd036b55 ("sched: Cleanup cpu_active madness").
So set active and online at the same time to avoid this particular
problem.
Fixes: 5fbd036b55 ("sched: Cleanup cpu_active madness")
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael wang <wangyun@linux.vnet.ibm.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Toshi Kani <toshi.kani@hp.com>
Link: http://lkml.kernel.org/r/53758B12.8060609@cn.fujitsu.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tejun reported that his resume was failing due to order-3 allocations
from sched_domain building.
Replace the NR_CPUS arrays in there with a dynamically allocated
array.
Reported-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-7cysnkw1gik45r864t1nkudh@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tejun reported that his resume was failing due to order-3 allocations
from sched_domain building.
Replace the NR_CPUS arrays in there with a dynamically allocated
array.
Reported-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-kat4gl1m5a6dwy6nzuqox45e@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Michael Kerrisk noticed that creating SCHED_DEADLINE reservations
with certain parameters (e.g, a runtime of something near 2^64 ns)
can cause a system freeze for some amount of time.
The problem is that in the interface we have
u64 sched_runtime;
while internally we need to have a signed runtime (to cope with
budget overruns)
s64 runtime;
At the time we setup a new dl_entity we copy the first value in
the second. The cast turns out with negative values when
sched_runtime is too big, and this causes the scheduler to go crazy
right from the start.
Moreover, considering how we deal with deadlines wraparound
(s64)(a - b) < 0
we also have to restrict acceptable values for sched_{deadline,period}.
This patch fixes the thing checking that user parameters are always
below 2^63 ns (still large enough for everyone).
It also rewrites other conditions that we check, since in
__checkparam_dl we don't have to deal with deadline wraparounds
and what we have now erroneously fails when the difference between
values is too big.
Reported-by: Michael Kerrisk <mtk.manpages@gmail.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Cc: Dario Faggioli<raistlin@linux.it>
Cc: Dave Jones <davej@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20140513141131.20d944f81633ee937f256385@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The way we read POSIX one should only call sched_getparam() when
sched_getscheduler() returns either SCHED_FIFO or SCHED_RR.
Given that we currently return sched_param::sched_priority=0 for all
others, extend the same behaviour to SCHED_DEADLINE.
Requested-by: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Dario Faggioli <raistlin@linux.it>
Cc: linux-man <linux-man@vger.kernel.org>
Cc: "Michael Kerrisk (man-pages)" <mtk.manpages@gmail.com>
Cc: Juri Lelli <juri.lelli@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20140512205034.GH13467@laptop.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The scheduler uses policy=-1 to preserve the current policy state to
implement sys_sched_setparam(), this got exposed to userspace by
accident through sys_sched_setattr(), cure this.
Reported-by: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: <stable@vger.kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20140509085311.GJ30445@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The documented[1] behavior of sched_attr() in the proposed man page text is:
sched_attr::size must be set to the size of the structure, as in
sizeof(struct sched_attr), if the provided structure is smaller
than the kernel structure, any additional fields are assumed
'0'. If the provided structure is larger than the kernel structure,
the kernel verifies all additional fields are '0' if not the
syscall will fail with -E2BIG.
As currently implemented, sched_copy_attr() returns -EFBIG for
for this case, but the logic in sys_sched_setattr() converts that
error to -EFAULT. This patch fixes the behavior.
[1] http://thread.gmane.org/gmane.linux.kernel/1615615/focus=1697760
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/536CEC17.9070903@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Merge x86/espfix into x86/vdso, due to changes in the vdso setup code
that otherwise cause conflicts.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Kernel API for classic BPF socket filters is:
sk_unattached_filter_create() - validate classic BPF, convert, JIT
SK_RUN_FILTER() - run it
sk_unattached_filter_destroy() - destroy socket filter
Cleanup internal BPF kernel API as following:
sk_filter_select_runtime() - final step of internal BPF creation.
Try to JIT internal BPF program, if JIT is not available select interpreter
SK_RUN_FILTER() - run it
sk_filter_free() - free internal BPF program
Disallow direct calls to BPF interpreter. Execution of the BPF program should
be done with SK_RUN_FILTER() macro.
Example of internal BPF create, run, destroy:
struct sk_filter *fp;
fp = kzalloc(sk_filter_size(prog_len), GFP_KERNEL);
memcpy(fp->insni, prog, prog_len * sizeof(fp->insni[0]));
fp->len = prog_len;
sk_filter_select_runtime(fp);
SK_RUN_FILTER(fp, ctx);
sk_filter_free(fp);
Sockets, seccomp, testsuite, tracing are using different ways to populate
sk_filter, so first steps of program creation are not common.
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Acked-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull more cgroup fixes from Tejun Heo:
"Three more patches to fix cgroup_freezer breakage due to the recent
cgroup internal locking changes - an operation cgroup_freezer was
using now requires sleepable context and cgroup_freezer was invoking
that while holding a spin lock. cgroup_freezer was using an overly
elaborate hierarchical locking scheme.
While it's possible to convert the hierarchical spinlocks directly to
mutexes, this patch simplifies the overall locking so that it uses a
global mutex. This has the added benefit of avoiding iterating
potentially huge number of tasks under a spinlock. While the patch is
on the larger side in the devel cycle, the changes made are mostly
straight-forward and the locking logic is a lot simpler afterwards"
* 'for-3.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: fix rcu_read_lock() leak in update_if_frozen()
cgroup_freezer: replace freezer->lock with freezer_mutex
cgroup: introduce task_css_is_root()
In the function-graph tracer, add a funcgraph_tail option
to print the function name on all } lines, not just
functions whose first line is no longer in the trace
buffer.
If a function calls other traced functions, its total
time appears on its } line. This change allows grep
to be used to determine the function for which the
line corresponds.
Update Documentation/trace/ftrace.txt to describe
this new option.
Link: http://lkml.kernel.org/p/20140520221041.8359.6782.stgit@beardog.cce.hp.com
Signed-off-by: Robert Elliott <elliott@hp.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Eliminate duplicate TRACE_GRAPH_PRINT_xx defines
in trace_functions_graph.c that are already in
trace.h.
Add TRACE_GRAPH_PRINT_IRQS to trace.h, which is
the only one that is missing.
Link: http://lkml.kernel.org/p/20140520221031.8359.24733.stgit@beardog.cce.hp.com
Signed-off-by: Robert Elliott <elliott@hp.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There are several problems with the code that rescuers use to bind
themselve to the target pool's cpumask.
1) It is very different from how the normal workers bind to cpumask,
increasing code complexity and maintenance overhead.
2) The code of cpu-binding for rescuers is complicated.
3) If one or more cpu hotplugs happen while a rescuer is processing
its scheduled work items, the rescuer may not stay bound to the
cpumask of the pool. This is an allowed behavior, but is still
hairy. It will be better if the cpumask of the rescuer is always
kept synchronized with the pool across cpu hotplugs.
Using generic attach/detach routine will solve the above problems and
results in much simpler code.
tj: Minor description updates.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently, the code to attach a new worker to its pool is embedded in
create_worker(). Separating this code out will make the codes clearer
and will allow rescuers to share the code path later.
tj: Description and comment updates.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
manager_mutex is only used to protect the attaching for the pool
and the pool->workers list. It protects the pool->workers and operations
based on this list, such as:
cpu-binding for the workers in the pool->workers
the operations to set/clear WORKER_UNBOUND
So let's rename manager_mutex to attach_mutex to better reflect its
role. This patch is a pure rename.
tj: Minor command and description updates.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
In create_worker(), as pool->worker_ida now uses
ida_simple_get()/ida_simple_put() and doesn't require external
synchronization, it doesn't need manager_mutex.
struct worker allocation and kthread allocation are not visible by any
one before attached, so they don't need manager_mutex either.
The above operations are before the attaching operation which attaches
the worker to the pool. Between attaching and starting the worker, the
worker is already attached to the pool, so the cpu hotplug will handle
cpu-binding for the worker correctly and we don't need the
manager_mutex after attaching.
The conclusion is that only the attaching operation needs manager_mutex,
so we narrow the protection section of manager_mutex in create_worker().
Some comments about manager_mutex are removed, because we will rename
it to attach_mutex and add worker_attach_to_pool() later which will be
self-explanatory.
tj: Minor description updates.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
We no longer iterate workers via worker_idr and worker_idr is used
only for allocating/freeing ID, so we can convert it to worker_ida.
By using ida_simple_get/remove(), worker_ida doesn't require external
synchronization, so we don't need manager_mutex to protect it and the
ID-removal code is allowed to be moved out from
worker_detach_from_pool().
In a later patch, worker_detach_from_pool() will be used in rescuers
which don't have IDs, so we move the ID-removal code out from
worker_detach_from_pool() into worker_thread().
tj: Minor description updates.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
worker_idr has the iteration (iterating for attached workers) and
worker ID duties. These two duties don't have to be tied together. We
can separate them and use a list for tracking attached workers and
iteration.
Before this separation, it wasn't possible to add rescuer workers to
worker_idr due to rescuer workers couldn't allocate ID dynamically
because ID-allocation depends on memory-allocation, which rescuer
can't depend on.
After separation, we can easily add the rescuer workers to the list for
iteration without any memory-allocation. It is required when we attach
the rescuer worker to the pool in later patch.
tj: Minor description updates.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Since destroy_worker() doesn't need to sleep nor require manager_mutex,
destroy_worker() can be directly called in the idle timeout
handler, it helps us remove POOL_MANAGE_WORKERS and
maybe_destroy_worker() and simplify the manage_workers()
After POOL_MANAGE_WORKERS is removed, worker_thread() doesn't
need to test whether it needs to manage after processed works.
So we can remove the test branch.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
worker destruction includes these parts of code:
adjust pool's stats
remove the worker from idle list
detach the worker from the pool
kthread_stop() to wait for the worker's task exit
free the worker struct
We can find out that there is no essential work to do after
kthread_stop(), which means destroy_worker() doesn't need to wait for
the worker's task exit, so we can remove kthread_stop() and free the
worker struct in the worker exiting path.
However, put_unbound_pool() still needs to sync the all the workers'
destruction before destroying the pool; otherwise, the workers may
access to the invalid pool when they are exiting.
So we also move the code of "detach the worker" to the exiting
path and let put_unbound_pool() to sync with this code via
detach_completion.
The code of "detach the worker" is wrapped in a new function
"worker_detach_from_pool()" although worker_detach_from_pool() is only
called once (in worker_thread()) after this patch, but we need to wrap
it for these reasons:
1) The code of "detach the worker" is not short enough to unfold them
in worker_thread().
2) the name of "worker_detach_from_pool()" is self-comment, and we add
some comments above the function.
3) it will be shared by rescuer in later patch which allows rescuer
and normal thread use the same attach/detach frameworks.
The worker id is freed when detaching which happens before the worker
is fully dead, but this id of the dying worker may be re-used for a
new worker, so the dying worker's task name is changed to
"worker/dying" to avoid two or several workers having the same name.
Since "detach the worker" is moved out from destroy_worker(),
destroy_worker() doesn't require manager_mutex, so the
"lockdep_assert_held(&pool->manager_mutex)" in destroy_worker() is
removed, and destroy_worker() is not protected by manager_mutex in
put_unbound_pool().
tj: Minor description updates.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
We used to have the CPU online failure path where a worker is created
and then destroyed without being started. A worker was created for
the CPU coming online and if the online operation failed the created worker
was shut down without being started. But this behavior was changed.
The first worker is created and started at the same time for the CPU coming
online.
It means that we had already ensured in the code that destroy_worker()
destroys only idle workers and we don't want to allow it to destroy
any non-idle worker in the future. Otherwise, it may be buggy and it
may be extremely hard to check. We should force destroy_worker() to
destroy only idle workers explicitly.
Since destroy_worker() destroys only idle workers, this patch does not
change any functionality. We just need to update the comments and the
sanity check code.
In the sanity check code, we will refuse to destroy the worker
if !(worker->flags & WORKER_IDLE).
If the worker entered idle which means it is already started,
so we remove the check of "worker->flags & WORKER_STARTED",
after this removal, WORKER_STARTED is totally unneeded,
so we remove WORKER_STARTED too.
In the comments for create_worker(), "Create a new worker which is bound..."
is changed to "... which is attached..." due to we change the name of this
behavior to attaching.
tj: Minor description / comment updates.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
worker_idr is highly bound to managers and is always/only accessed in manager
lock context. So we don't need pool->lock for it.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull timer fix from Thomas Gleixner:
"A single bug fix for a long standing issue:
- Updating the expiry value of a relative timer _after_ letting the
idle logic select a target cpu for the timer based on its stale
expiry value is outright stupid. Thanks to Viresh for spotting the
brainfart"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
hrtimer: Set expiry time before switch_hrtimer_base()
The OPP code is an in kernel library selected by its users, there is no
no architecture code required to implement it and enabling it without a
user just increases the kernel size. Since the users select rather than
depend on it just remove the ability to directly set the option from
Kconfig.
Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Nishanth Menon <nm@ti.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The debug controller, as its name suggests, exposes cgroup core
internals to userland to aid debugging. Unfortunately, except for the
name, there's no provision to prevent its usage in production
configurations and the controller is widely enabled and mounted
leaking internal details to userland. Like most other debug
information, the information exposed by debug isn't interesting even
for debugging itself once the related parts are working reliably.
This controller has no reason for existing. This patch implements
cgrp_dfl_root_inhibit_ss_mask which can suppress specific subsystems
on the default hierarchy and adds the debug subsystem to it so that it
can be gradually deprecated as usages move towards the unified
hierarchy.
Signed-off-by: Tejun Heo <tj@kernel.org>
Some sysrq handlers can run for a long time, because they dump a lot
of data onto a serial console. Having RCU stall warnings pop up in
the middle of them only makes the problem worse.
This commit provides rcu_sysrq_start() and rcu_sysrq_end() APIs to
temporarily suppress RCU CPU stall warnings while a sysrq request is
handled.
Signed-off-by: Rik van Riel <riel@redhat.com>
[ paulmck: Fix TINY_RCU build error. ]
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Alexander noticed that we use RCU iteration on rb->event_list but do
not use list_{add,del}_rcu() to add,remove entries to that list, nor
do we observe proper grace periods when re-using the entries.
Merge ring_buffer_detach() into ring_buffer_attach() such that
attaching to the NULL buffer is detaching.
Furthermore, ensure that between any 'detach' and 'attach' of the same
event we observe the required grace period, but only when strictly
required. In effect this means that only ioctl(.request =
PERF_EVENT_IOC_SET_OUTPUT) will wait for a grace period, while the
normal initial attach and final detach will not be delayed.
This patch should, I think, do the right thing under all
circumstances, the 'normal' cases all should never see the extra grace
period, but the two cases:
1) PERF_EVENT_IOC_SET_OUTPUT on an event which already has a
ring_buffer set, will now observe the required grace period between
removing itself from the old and attaching itself to the new buffer.
This case is 'simple' in that both buffers are present in
perf_event_set_output() one could think an unconditional
synchronize_rcu() would be sufficient; however...
2) an event that has a buffer attached, the buffer is destroyed
(munmap) and then the event is attached to a new/different buffer
using PERF_EVENT_IOC_SET_OUTPUT.
This case is more complex because the buffer destruction does:
ring_buffer_attach(.rb = NULL)
followed by the ioctl() doing:
ring_buffer_attach(.rb = foo);
and we still need to observe the grace period between these two
calls due to us reusing the event->rb_entry list_head.
In order to make 2 happen we use Paul's latest cond_synchronize_rcu()
call.
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Reported-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140507123526.GD13658@twins.programming.kicks-ass.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The perf cpu offline callback takes down all cpu context
events and releases swhash->swevent_hlist.
This could race with task context software event being just
scheduled on this cpu via perf_swevent_add while cpu hotplug
code already cleaned up event's data.
The race happens in the gap between the cpu notifier code
and the cpu being actually taken down. Note that only cpu
ctx events are terminated in the perf cpu hotplug code.
It's easily reproduced with:
$ perf record -e faults perf bench sched pipe
while putting one of the cpus offline:
# echo 0 > /sys/devices/system/cpu/cpu1/online
Console emits following warning:
WARNING: CPU: 1 PID: 2845 at kernel/events/core.c:5672 perf_swevent_add+0x18d/0x1a0()
Modules linked in:
CPU: 1 PID: 2845 Comm: sched-pipe Tainted: G W 3.14.0+ #256
Hardware name: Intel Corporation Montevina platform/To be filled by O.E.M., BIOS AMVACRB1.86C.0066.B00.0805070703 05/07/2008
0000000000000009 ffff880077233ab8 ffffffff81665a23 0000000000200005
0000000000000000 ffff880077233af8 ffffffff8104732c 0000000000000046
ffff88007467c800 0000000000000002 ffff88007a9cf2a0 0000000000000001
Call Trace:
[<ffffffff81665a23>] dump_stack+0x4f/0x7c
[<ffffffff8104732c>] warn_slowpath_common+0x8c/0xc0
[<ffffffff8104737a>] warn_slowpath_null+0x1a/0x20
[<ffffffff8110fb3d>] perf_swevent_add+0x18d/0x1a0
[<ffffffff811162ae>] event_sched_in.isra.75+0x9e/0x1f0
[<ffffffff8111646a>] group_sched_in+0x6a/0x1f0
[<ffffffff81083dd5>] ? sched_clock_local+0x25/0xa0
[<ffffffff811167e6>] ctx_sched_in+0x1f6/0x450
[<ffffffff8111757b>] perf_event_sched_in+0x6b/0xa0
[<ffffffff81117a4b>] perf_event_context_sched_in+0x7b/0xc0
[<ffffffff81117ece>] __perf_event_task_sched_in+0x43e/0x460
[<ffffffff81096f1e>] ? put_lock_stats.isra.18+0xe/0x30
[<ffffffff8107b3c8>] finish_task_switch+0xb8/0x100
[<ffffffff8166a7de>] __schedule+0x30e/0xad0
[<ffffffff81172dd2>] ? pipe_read+0x3e2/0x560
[<ffffffff8166b45e>] ? preempt_schedule_irq+0x3e/0x70
[<ffffffff8166b45e>] ? preempt_schedule_irq+0x3e/0x70
[<ffffffff8166b464>] preempt_schedule_irq+0x44/0x70
[<ffffffff816707f0>] retint_kernel+0x20/0x30
[<ffffffff8109e60a>] ? lockdep_sys_exit+0x1a/0x90
[<ffffffff812a4234>] lockdep_sys_exit_thunk+0x35/0x67
[<ffffffff81679321>] ? sysret_check+0x5/0x56
Fixing this by tracking the cpu hotplug state and displaying
the WARN only if current cpu is initialized properly.
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: stable@vger.kernel.org
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1396861448-10097-1-git-send-email-jolsa@redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Vince reported that using a large sample_period (one with bit 63 set)
results in wreckage since while the sample_period is fundamentally
unsigned (negative periods don't make sense) the way we implement
things very much rely on signed logic.
So limit sample_period to 63 bits to avoid tripping over this.
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/n/tip-p25fhunibl4y3qi0zuqmyf4b@git.kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We happily allow userspace to declare a random kernel thread to be the
owner of a user space PI futex.
Found while analysing the fallout of Dave Jones syscall fuzzer.
We also should validate the thread group for private futexes and find
some fast way to validate whether the "alleged" owner has RW access on
the file which backs the SHM, but that's a separate issue.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Jones <davej@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Darren Hart <darren@dvhart.com>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Clark Williams <williams@redhat.com>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: Carlos ODonell <carlos@redhat.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: http://lkml.kernel.org/r/20140512201701.194824402@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Dave Jones trinity syscall fuzzer exposed an issue in the deadlock
detection code of rtmutex:
http://lkml.kernel.org/r/20140429151655.GA14277@redhat.com
That underlying issue has been fixed with a patch to the rtmutex code,
but the futex code must not call into rtmutex in that case because
- it can detect that issue early
- it avoids a different and more complex fixup for backing out
If the user space variable got manipulated to 0x80000000 which means
no lock holder, but the waiters bit set and an active pi_state in the
kernel is found we can figure out the recursive locking issue by
looking at the pi_state owner. If that is the current task, then we
can safely return -EDEADLK.
The check should have been added in commit 59fa62451 (futex: Handle
futex_pi OWNER_DIED take over correctly) already, but I did not see
the above issue caused by user space manipulation back then.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Jones <davej@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Darren Hart <darren@dvhart.com>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Clark Williams <williams@redhat.com>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: Carlos ODonell <carlos@redhat.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: http://lkml.kernel.org/r/20140512201701.097349971@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
In the original code "resume_delay" is an int so on 64 bits, the call to
kstrtoul() will cause memory corruption. We may as well fix a style
issue here as well and make "resume_delay" unsigned int, since that's
what we pass to ssleep().
Fixes: 317cf7e5e8 (PM / hibernate: convert simple_strtoul to kstrtoul)
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Now that cgroup liveliness and css onliness are the same state,
convert cgroup_has_live_children() into css_has_online_children() so
that it can be used for actual csses too. The function now uses
css_for_each_child() for iteration and is published.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Use CSS_ONLINE on the self css to indicate whether a cgroup has been
killed instead of CGRP_DEAD. This will allow re-using css online test
for cgroup liveliness test. This doesn't introduce any functional
change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Currently, css_next_child() is implemented as finding the next child
cgroup which has the css enabled, which used to be the only way to do
it as only cgroups participated in sibling lists and thus could be
iteratd. This works as long as what's required during iteration is
not missing online csses; however, it turns out that there are use
cases where offlined but not yet released csses need to be iterated.
This is difficult to implement through cgroup iteration the unified
hierarchy as there may be multiple dying csses for the same subsystem
associated with single cgroup.
After the recent changes, the cgroup self and regular csses behave
identically in how they're linked and unlinked from the sibling lists
including assertion of CSS_RELEASED and css_next_child() can simply
switch to iterating csses directly. This both simplifies the logic
and ensures that all visible non-released csses are included in the
iteration whether there are multiple dying csses for a subsystem or
not.
As all other iterators depend on css_next_child() for sibling
iteration, this changes behaviors of all css iterators. Add and
update explanations on the css states which are included in traversal
to all iterators.
As css iteration could always contain offlined csses, this shouldn't
break any of the current users and new usages which need iteration of
all on and offline csses can make use of the new semantics.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
css iterations allow the caller to drop RCU read lock. As long as the
caller keeps the current position accessible, it can simply re-grab
RCU read lock later and continue iteration. This is achieved by using
CGRP_DEAD to detect whether the current positions next pointer is safe
to dereference and if not re-iterate from the beginning to the next
position using ->serial_nr.
CGRP_DEAD is used as the marker to invalidate the next pointer and the
only requirement is that the marker is set before the next sibling
starts its RCU grace period. Because CGRP_DEAD is set at the end of
cgroup_destroy_locked() but the cgroup is unlinked when the reference
count reaches zero, we currently have a rather large window where this
fallback re-iteration logic can be triggered.
This patch introduces CSS_RELEASED which is set when a css is unlinked
from its sibling list. This still keeps the re-iteration logic
working while drastically reducing the window of its activation.
While at it, rewrite the comment in css_next_child() to reflect the
new flag and better explain the synchronization.
This will also enable iterating csses directly instead of through
cgroups.
v2: CSS_RELEASED now assigned to 1 << 2 as 1 << 0 is used by
CSS_NO_REF.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
We're moving towards using cgroup_subsys_states as the fundamental
structural blocks. All csses including the cgroup->self and actual
ones now form trees through css->children and ->sibling which follow
the same rules as what cgroup->children and ->sibling followed. This
patch moves cgroup->serial_nr which is used to implement css iteration
into css.
Note that all csses, regardless of their types, allocate their serial
numbers from the same monotonically increasing counter. This doesn't
affect the ordering needed by css iteration or cause any other
material behavior changes. This will be used to update css iteration.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Currently, while all csses have ->children and ->sibling, only the
self csses of cgroups make use of them. This patch makes all other
csses to link themselves on the sibling lists too. This will be used
to update css iteration.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
We're moving towards using cgroup_subsys_states as the fundamental
structural blocks. Let's move cgroup->sibling and ->children into
cgroup_subsys_state. This is pure move without functional change and
only cgroup->self's fields are actually used. Other csses will make
use of the fields later.
While at it, update init_and_link_css() so that it zeroes the whole
css before initializing it and remove explicit zeroing of ->flags.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
cgroup->parent is redundant as cgroup->self.parent can also be used to
determine the parent cgroup and we're moving towards using
cgroup_subsys_states as the fundamental structural blocks. This patch
introduces cgroup_parent() which follows cgroup->self.parent and
removes cgroup->parent.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
cgroup in general is moving towards using cgroup_subsys_state as the
fundamental structural component and css_parent() was introduced to
convert from using cgroup->parent to css->parent. It was quite some
time ago and we're moving forward with making css more prominent.
This patch drops the trivial wrapper css_parent() and let the users
dereference css->parent. While at it, explicitly mark fields of css
which are public and immutable.
v2: New usage from device_cgroup.c converted.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: "David S. Miller" <davem@davemloft.net>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Johannes Weiner <hannes@cmpxchg.org>
9395a45004 ("cgroup: enable refcnting for root csses") enabled
reference counting for root csses (cgroup_subsys_states) so that
cgroup's self csses can be used to manage the lifetime of the
containing cgroups.
Unfortunately, this change was incorrect. During early init,
cgrp_dfl_root self css refcnt is used. percpu_ref can't initialized
during early init and its initialization is deferred till
cgroup_init() time. This means that cpu was using percpu_ref which
wasn't properly initialized. Due to the way percpu variables are laid
out on x86, this didn't blow up immediately on x86 but ended up
incrementing and decrementing the percpu variable at offset zero,
whatever it may be; however, on other archs, this caused fault and
early boot failure.
As cgroup self csses for root cgroups of non-dfl hierarchies need
working refcounting, we can't revert 9395a45004. This patch adds
CSS_NO_REF which explicitly inhibits reference counting on the css and
sets it on all normal (non-self) csses and cgroup_dfl_root self css.
v2: cgrp_dfl_root.self is the offending one. Set the flag on it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
Fixes: 9395a45004 ("cgroup: enable refcnting for root csses")
No more users. Get rid of the cruft.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Grant Likely <grant.likely@linaro.org>
Tested-by: Tony Luck <tony.luck@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140507154341.012847637@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Create a new interface and confine it with a config switch which makes
clear that this is just legacy support and not to be used for new code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Grant Likely <grant.likely@linaro.org>
Tested-by: Tony Luck <tony.luck@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140507154340.574437049@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
No more users. And it's not going to come back. If you need
hotplugable irq chips, use irq domains.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-and-acked-by: Grant Likely <grant.likely@linaro.org>
Tested-by: Tony Luck <tony.luck@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140507154340.302183048@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We want to get rid of the public interface.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Grant Likely <grant.likely@linaro.org>
Tested-by: Tony Luck <tony.luck@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140507154340.061990194@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Not really the solution to the problem, but at least it confines the
mess in the core code and allows to get rid of the create/destroy_irq
variants from hell, i.e. 3 implementations with different semantics
plus the x86 specific variants __create_irqs and create_irq_nr
which have been invented in another circle of hell.
x86 : x86 should be converted to irq domains and I'm deliberately
making it impossible to do the multi-vector MSI support by
adding more crap to the current mess. It's not that hard to do
and I'm really tired of the trainwrecks which have been invented
by baindaid engineering so far. Any attempt to do multi-vector
MSI or ioapic hotplug without converting to irq domains is NAKed
hereby.
tile: Might use irq domains as well, but it has a very limited
interrupt space, so handling it via this functionality might be
the right thing to do even in the long run.
ia64: That's an hopeless case, as I doubt that anyone has the stomach
to rewrite the homebrewn dynamic allocation facilities. I stared
at it for a couple of hours and gave up. The create/destroy_irq
mess could be made private to itanic right away if there
wouldn't be the iommu/dmar driver being shared with x86. So to
do that I'm going to add a separate ia64 specific implementation
later in order not to deep-six itanic right away.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Grant Likely <grant.likely@linaro.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/20140507154334.208629358@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The "freeze" sleep state suffers from the same issue that was
addressed by commit ad07277e82 (ACPI / PM: Hold acpi_scan_lock over
system PM transitions) for ACPI sleep states, that is, things break
if ->remove() is called for devices whose system resume callbacks
haven't been executed yet.
It also can be addressed in the same way, by holding the ACPI scan
lock over the "freeze" sleep state and PM transitions to and from
that state, but ->begin() and ->end() platform operations for the
"freeze" sleep state are needed for this purpose.
This change has been tested on Acer Aspire S5 with Thunderbolt.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Take advantage of internal BPF JIT
05-sim-long_jumps.c of libseccomp was used as micro-benchmark:
seccomp_rule_add_exact(ctx,...
seccomp_rule_add_exact(ctx,...
rc = seccomp_load(ctx);
for (i = 0; i < 10000000; i++)
syscall(...);
$ sudo sysctl net.core.bpf_jit_enable=1
$ time ./bench
real 0m2.769s
user 0m1.136s
sys 0m1.624s
$ sudo sysctl net.core.bpf_jit_enable=0
$ time ./bench
real 0m5.825s
user 0m1.268s
sys 0m4.548s
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Being able to show a cpumask of events can be useful as some events
may affect only some CPUs. There is no standard way to record the
cpumask and converting it to a string is rather expensive during
the trace as traces happen in hotpaths. It would be better to record
the raw event mask and be able to parse it at print time.
The following macros were added for use with the TRACE_EVENT() macro:
__bitmask()
__assign_bitmask()
__get_bitmask()
To test this, I added this to the sched_migrate_task event, which
looked like this:
TRACE_EVENT(sched_migrate_task,
TP_PROTO(struct task_struct *p, int dest_cpu, const struct cpumask *cpus),
TP_ARGS(p, dest_cpu, cpus),
TP_STRUCT__entry(
__array( char, comm, TASK_COMM_LEN )
__field( pid_t, pid )
__field( int, prio )
__field( int, orig_cpu )
__field( int, dest_cpu )
__bitmask( cpumask, num_possible_cpus() )
),
TP_fast_assign(
memcpy(__entry->comm, p->comm, TASK_COMM_LEN);
__entry->pid = p->pid;
__entry->prio = p->prio;
__entry->orig_cpu = task_cpu(p);
__entry->dest_cpu = dest_cpu;
__assign_bitmask(cpumask, cpumask_bits(cpus), num_possible_cpus());
),
TP_printk("comm=%s pid=%d prio=%d orig_cpu=%d dest_cpu=%d cpumask=%s",
__entry->comm, __entry->pid, __entry->prio,
__entry->orig_cpu, __entry->dest_cpu,
__get_bitmask(cpumask))
);
With the output of:
ksmtuned-3613 [003] d..2 485.220508: sched_migrate_task: comm=ksmtuned pid=3615 prio=120 orig_cpu=3 dest_cpu=2 cpumask=00000000,0000000f
migration/1-13 [001] d..5 485.221202: sched_migrate_task: comm=ksmtuned pid=3614 prio=120 orig_cpu=1 dest_cpu=0 cpumask=00000000,0000000f
awk-3615 [002] d.H5 485.221747: sched_migrate_task: comm=rcu_preempt pid=7 prio=120 orig_cpu=0 dest_cpu=1 cpumask=00000000,000000ff
migration/2-18 [002] d..5 485.222062: sched_migrate_task: comm=ksmtuned pid=3615 prio=120 orig_cpu=2 dest_cpu=3 cpumask=00000000,0000000f
Link: http://lkml.kernel.org/r/1399377998-14870-6-git-send-email-javi.merino@arm.com
Link: http://lkml.kernel.org/r/20140506132238.22e136d1@gandalf.local.home
Suggested-by: Javi Merino <javi.merino@arm.com>
Tested-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
ip_local_port_range is already per netns, so should ip_local_reserved_ports
be. And since it is none by default we don't actually need it when we don't
enable CONFIG_SYSCTL.
By the way, rename inet_is_reserved_local_port() to inet_is_local_reserved_port()
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The variable and struct both having the name "rcu_state" confuses
sparse in some situations, so this commit changes the variable to
"rcu_state_p" in order to avoid this confusion. This also makes
things easier for human readers.
Signed-off-by: Uma Sharma <uma.sharma523@gmail.com>
[ paulmck: Changed the declaration and several additional uses. ]
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The torture tests are designed to run in isolation, but do not enforce
this isolation. This commit therefore checks for concurrent torture
tests, and refuses to start new tests while old tests are running.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The locktorture module references CONFIG_LOCK_TORTURE_TEST_RUNNABLE,
which does not exist. Which is a good thing, because otherwise
randconfig testing could enable both rcutorture and locktorture
concurrently, which the torture tests are not set up for. This
commit therefore removes the reference, so that test is runnable
immediately only when inserted as a module.
Reported-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
There are usually lots of readers and only one writer, so if there has
to be a choice, we would want rcu_torture_writer to win. This commit
therefore removes the set_user_nice() from rcu_torture_writer().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The rcu_torture_reader() function uses an on-stack timer_list structure
which it initializes with setup_timer_on_stack(). However, it fails to
use destroy_timer_on_stack() before exiting, which results in leaking a
tracking object if DEBUG_OBJECTS is enabled. This commit therefore
invokes destroy_timer_on_stack() to avoid this leakage.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The original rcu_torture_writer() avoided testing the synchronous
grace-period primitives because they were simply wrappers around
call_rcu() invocations. The testing of these synchronous primitives
was delegated to the fake writers. However, there really is no excuse
not to test them, especially in the case of SRCU, where the wrappering
is somewhat more elaborate. This commit therefore makes the default
rcutorture parameters cause rcu_torture_writer() to include synchronous
grace-period primitives in its testing.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit adds rcutorture testing for get_state_synchronize_rcu()
and cond_synchronize_rcu().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The return value from torture_create_kthread() is currently ignored
when creating the rcu_torture_fqs kthread. This commit therefore
captures the return value so that it can be tested for errors.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
In torture_shuffle_tasks function, the check if an all-zero mask can
be passed to set_cpus_allowed_ptr() is redundant after clearing the
shuffle_idle_cpu bit. If the mask had more than one bit set, after
clearing a bit it has at least one bit set. If the mask had only
one bit set, a check is made at the beginning, where the function
returns, as there is no need to shuffle only one cpu.
Also, this code is executed inside a critical section, delimited by
get_online_cpus(), and put_online_cpus(), preventing CPUs from leaving between
the check of num_online_cpus and the calls to set_cpus_allowed_ptr() function.
Signed-off-by: Iulia Manda <iulia.manda21@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The rcu_torture_reader() function currently uses schedule(). This commit
therefore speeds things up a bit by substituting cond_resched().
This change makes rcu_torture_reader() more CPU-bound, so this commit
also adjusts the number of readers (the "nreaders" module parameter,
which feeds into the "nrealreaders" variable) to allow one CPU to be
free of readers on SMP systems. The point of this is to increase the
probability that readers will be watching while an updater makes a change.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Given a CPU running a loop containing cond_resched(), with no
other tasks runnable on that CPU, RCU will eventually report RCU
CPU stall warnings due to lack of quiescent states. Fortunately,
every call to cond_resched() is a perfectly good quiescent state.
Unfortunately, invoking rcu_note_context_switch() is a bit heavyweight
for cond_resched(), especially given the need to disable preemption,
and, for RCU-preempt, interrupts as well.
This commit therefore maintains a per-CPU counter that causes
cond_resched(), cond_resched_lock(), and cond_resched_softirq() to call
rcu_note_context_switch(), but only about once per 256 invocations.
This ratio was chosen in keeping with the relative time constants of
RCU grace periods.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit allows rcutorture to print additional state for the
RCU grace-period kthreads in cases where RCU seems reluctant to
start a new grace period.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit adds a call to rcutorture_trace_dump() to dump the ftrace
buffer when the RCU grace period stalls in order to help debug the
stall. Note that this is different than the RCU CPU stall warning,
as it is rcutorture detecting the stall rather than the underlying RCU
implementation.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Currently, all stuttered kthreads block a jiffy at a time, which can
result in them starting at different times. (Note: This is not an
energy-efficiency problem unless you run torture tests in production,
in which case you have other problems!) This commit increases the
intensity of the restart event by causing kthreads to spin through the
last jiffy, restarting when they see the variable change.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Currently, torture_kthread_stopping() prints only the name of the
kthread that is stopping, which can be unedifying. This commit therefore
adds "Stopping" to make things more evident.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The srcu_torture_stats() function prints SRCU's per-CPU c[] array with
an unsigned format, which means that the number one less than zero is
a very large number. This commit therefore prints this array with a
signed format in order to improve readability of the rcutorture output.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Mark functions as static in kernel/rcu/torture.c because they are not
used outside this file.
This eliminates the following warning in kernel/rcu/torture.c:
kernel/rcu/torture.c:902:6: warning: no previous prototype for ‘rcutorture_trace_dump’ [-Wmissing-prototypes]
kernel/rcu/torture.c:1572:6: warning: no previous prototype for ‘rcu_torture_barrier_cbf’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
As the decision to what needs to be done (converting a call to the
ftrace_caller to ftrace_caller_regs or to convert from ftrace_caller_regs
to ftrace_caller) can easily be determined from the rec->flags of
FTRACE_FL_REGS and FTRACE_FL_REGS_EN, there's no need to have the
ftrace_check_record() return either a UPDATE_MODIFY_CALL_REGS or a
UPDATE_MODIFY_CALL. Just he latter is enough. This added flag causes
more complexity than is required. Remove it.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
With the moving of the functions that determine what the mcount call site
should be replaced with into the generic code, there is a few places
in the generic code that can use them instead of hard coding it as it
does.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Move and rename get_ftrace_addr() and get_ftrace_addr_old() to
ftrace_get_addr_new() and ftrace_get_addr_curr() respectively.
This moves these two helper functions in the generic code out from
the arch specific code, and renames them to have a better generic
name. This will allow other archs to use them as well as makes it
a bit easier to work on getting separate trampolines for different
functions.
ftrace_get_addr_new() returns the trampoline address that the mcount
call address will be converted to.
ftrace_get_addr_curr() returns the trampoline address of what the
mcount call address currently jumps to.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The ftrace_hash_empty() function is a simple test:
return !hash || !hash->count;
But gcc seems to want to make it a call. As this is in an extreme
hot path of the function tracer, there's no reason it needs to be
a call. I only wrote it to be a helper function anyway, otherwise
it would have been inlined manually.
Force gcc to inline it, as it could have also been a macro.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Back in 2011 Commit ed926f9b35 "ftrace: Use counters to enable
functions to trace" changed the way ftrace accounts for enabled
and disabled traced functions. There was a comment started as:
/*
*
*/
But never finished. Well, that's rather useless. I probably forgot
to save the file before committing it. And it passed review from all
this time.
Anyway, better late than never. I updated the comment to express what
is happening in that somewhat complex code.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Commit 4104d326b6 "ftrace: Remove global function list and call
function directly" cleaned up the global_ops filtering and made
the code simpler, but it left a variable "hash_enable" that was used
to know if the hash functions should be updated or not. It was
updated if the global_ops did not override them. As the global_ops
are now no different than any other ftrace_ops, the hash always
gets updated and there's no reason to use the hash_enable boolean.
The same goes for hash_disable used in ftrace_shutdown().
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently cgroup implements refcnting separately using atomic_t
cgroup->refcnt. The destruction paths of cgroup and css are rather
complex and bear a lot of similiarities including the use of RCU and
bouncing to a work item.
This patch makes cgroup use the refcnt of self css for refcnting
instead of using its own. This makes cgroup refcnting use css's
percpu refcnt and share the destruction mechanism.
* css_release_work_fn() and css_free_work_fn() are updated to handle
both csses and cgroups. This is a bit messy but should do until we
can make cgroup->self a full css, which currently can't be done
thanks to multiple hierarchies.
* cgroup_destroy_locked() now performs
percpu_ref_kill(&cgrp->self.refcnt) instead of cgroup_put(cgrp).
* Negative refcnt sanity check in cgroup_get() is no longer necessary
as percpu_ref already handles it.
* Similarly, as a cgroup which hasn't been killed will never be
released regardless of its refcnt value and percpu_ref has sanity
check on kill, cgroup_is_dead() sanity check in cgroup_put() is no
longer necessary.
* As whether a refcnt reached zero or not can only be decided after
the reference count is killed, cgroup_root->cgrp's refcnting can no
longer be used to decide whether to kill the root or not. Let's
make cgroup_kill_sb() explicitly initiate destruction if the root
doesn't have any children. This makes sense anyway as unmounted
cgroup hierarchy without any children should be destroyed.
While this is a bit messy, this will allow pushing more bookkeeping
towards cgroup->self and thus handling cgroups and csses in more
uniform way. In the very long term, it should be possible to
introduce a base subsystem and convert the self css to a proper one
making things whole lot simpler and unified.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Currently, css_get(), css_tryget() and css_tryget_online() are noops
for root csses as an optimization; however, we're planning to use css
refcnts to track of cgroup lifetime too and root cgroups also need to
be reference counted. Since css has been converted to percpu_refcnt,
the overhead of refcnting is miniscule and this optimization isn't too
meaningful anymore. Furthermore, controllers which optimize the root
cgroup often never even invoke these functions in their hot paths.
This patch enables refcnting for root csses too. This makes CSS_ROOT
flag unused and removes it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
css release is planned to do more and would require process context.
Bounce it through css->destroy_work.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
cgroup_destroy_css_killed() is cgroup destruction stage which happens
after all csses are offlined. After the recent updates, it no longer
does anything other than putting the base reference. This patch
removes the function and makes cgroup_destroy_locked() put the base
ref at the end isntead.
This also makes cgroup->nr_css unnecessary. Removed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Move cgroup->sibling unlinking from cgroup_destroy_css_killed() to
cgroup_put(). This is later but still before the RCU grace period, so
it doesn't break css_next_child() although there now is a larger
window in which a dead cgroup is visible during css iteration. As css
iteration always could have included offline csses, this doesn't
affect correctness; however, it does make css_next_child() fall back
to reiterting mode more often. This also makes cgroup_put() directly
take cgroup_mutex, which limits where it can be called from. These
are not immediately problematic and will be dealt with later.
This change enables simplification of cgroup destruction path.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Currently, check_for_release() on the parent of a destroyed cgroup is
invoked from cgroup_destroy_css_killed(). This is because this is
where the destroyed cgroup can be removed from the parent's children
list. check_for_release() tests the emptiness of the list directly,
so invoking it before removing the cgroup from the list makes it think
that the parent still has children even when it no longer does.
This patch updates check_for_release() to use
cgroup_has_live_children() instead of directly testing ->children
emptiness and moves check_for_release(parent) earlier to the end of
cgroup_destroy_locked(). As cgroup_has_live_children() ignores
cgroups marked DEAD, check_for_release() functions correctly as long
as it's called after asserting DEAD.
This makes release notification slightly more timely and more
importantly enables further simplification of cgroup destruction path.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
cgroup->dummy_css is used as the placeholder css when performing css
oriended operations on the cgroup. We're gonna shift more cgroup
management to this css. Let's rename it to ->self and move it to the
top.
This is pure rename and field relocation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
cgroup_mount() uses dumb delay-and-retry logic to wait for cgroup_root
which is being destroyed. The retry currently loops inside
cgroup_mount() proper. This patch makes it return with
restart_syscall() instead so that retry travels out to userland
boundary.
This slightly simplifies the logic and more importantly makes the
retry logic behave better when the wait for some reason becomes
lengthy or infinite by allowing the operation to be suspended or
terminated from userland.
v2: The original patch forgot to free memory allocated for @opts.
Fixed. Caught by Li Zefan.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
If the probed insn triggers a trap, ->si_addr = regs->ip is technically
correct, but this is not what the signal handler wants; we need to pass
the address of the probed insn, not the address of xol slot.
Add the new arch-agnostic helper, uprobe_get_trap_addr(), and change
fill_trap_info() and math_error() to use it. !CONFIG_UPROBES case in
uprobes.h uses a macro to avoid include hell and ensure that it can be
compiled even if an architecture doesn't define instruction_pointer().
Test-case:
#include <signal.h>
#include <stdio.h>
#include <unistd.h>
extern void probe_div(void);
void sigh(int sig, siginfo_t *info, void *c)
{
int passed = (info->si_addr == probe_div);
printf(passed ? "PASS\n" : "FAIL\n");
_exit(!passed);
}
int main(void)
{
struct sigaction sa = {
.sa_sigaction = sigh,
.sa_flags = SA_SIGINFO,
};
sigaction(SIGFPE, &sa, NULL);
asm (
"xor %ecx,%ecx\n"
".globl probe_div; probe_div:\n"
"idiv %ecx\n"
);
return 0;
}
it fails if probe_div() is probed.
Note: show_unhandled_signals users should probably use this helper too,
but we need to cleanup them first.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Hugh says:
The one I noticed was that it forgets all about memcg (because
it was copied from KSM, and there the replacement page has already
been charged to a memcg). See how mm/memory.c do_anonymous_page()
does a mem_cgroup_charge_anon().
Hopefully not a big problem, uprobes is a system-wide thing and only
root can insert the probes. But I agree, should be fixed anyway.
Add mem_cgroup_{un,}charge_anon() into uprobe_write_opcode(). To simplify
the error handling (and avoid the new "uncharge" label) the patch also
moves anon_vma_prepare() up before we alloc/charge the new page.
While at it fix the comment about ->mmap_sem, it is held for write.
Suggested-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
We currently set RO & NX on modules very late: after we move them from
MODULE_STATE_UNFORMED to MODULE_STATE_COMING, and after we call
parse_args() (which can exec code in the module).
Much better is to do it in complete_formation() and then call
the notifier.
This means that the notifiers will be called on a module which
is already RO & NX, so that may cause problems (ftrace already
changed so they're unaffected).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The current lock_torture_writer() spends too much time sleeping and not
enough time hammering locks, as in an eight-CPU test will often only be
utilizing a CPU or two. This commit therefore makes lock_torture_writer()
sleep less and hammer more.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcutorture output currently does not distinguish between stalls in
the RCU implementation and stalls in the rcu_torture_writer() kthreads.
This commit therefore adds some diagnostics to help distinguish between
these two conditions, at least for the non-SRCU implementations. (SRCU
does not provide evidence of update-side forward progress by design.)
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
cgroup_tree_mutex was introduced to work around the circular
dependency between cgroup_mutex and kernfs active protection - some
kernfs file and directory operations needed cgroup_mutex putting
cgroup_mutex under active protection but cgroup also needs to be able
to access cgroup hierarchies and cftypes to determine which
kernfs_nodes need to be removed. cgroup_tree_mutex nested above both
cgroup_mutex and kernfs active protection and used to protect the
hierarchy and cftypes. While this worked, it added a lot of double
lockings and was generally cumbersome.
kernfs provides a mechanism to opt out of active protection and cgroup
was already using it for removal and subtree_control. There's no
reason to mix both methods of avoiding circular locking dependency and
the preceding cgroup_kn_lock_live() changes applied it to all relevant
cgroup kernfs operations making it unnecessary to nest cgroup_mutex
under kernfs active protection. The previous patch reversed the
original lock ordering and put cgroup_mutex above kernfs active
protection.
After these changes, all cgroup_tree_mutex usages are now accompanied
by cgroup_mutex making the former completely redundant. This patch
removes cgroup_tree_mutex and all its usages.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
After the recent cgroup_kn_lock_live() changes, cgroup_mutex is no
longer nested below kernfs active protection. The two don't have any
relationship now.
This patch nests kernfs active protection under cgroup_mutex. All
cftype operations now require both cgroup_tree_mutex and cgroup_mutex,
temporary cgroup_mutex releases over kernfs operations are removed,
and cgroup_add/rm_cftypes() grab both mutexes.
This makes cgroup_tree_mutex redundant, which will be removed by the
next patch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Make __cgroup_procs_write() and cgroup_release_agent_write() use
cgroup_kn_lock_live() and cgroup_kn_unlock() instead of
cgroup_lock_live_group(). This puts the operations under both
cgroup_tree_mutex and cgroup_mutex protection without circular
dependency from kernfs active protection. Also, this means that
cgroup_mutex is no longer nested below kernfs active protection.
There is no longer any place where the two locks interact.
This leaves cgroup_lock_live_group() without any user. Removed.
This will help simplifying cgroup locking.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
cgroup_mkdir(), cgroup_rmdir() and cgroup_subtree_control_write()
share the logic to break active protection so that they can grab
cgroup_tree_mutex which nests above active protection and/or remove
self. Factor out this logic into cgroup_kn_lock_live() and
cgroup_kn_unlock().
This patch doesn't introduce any functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
The ->priv field of a cgroup directory kernfs_node points back to the
cgroup. This field is RCU cleared in cgroup_destroy_locked() for
non-kernfs accesses from css_tryget_from_dir() and
cgroupstats_build().
As these are only applicable to cgroups which finished creation
successfully and fully initialized cgroups are always removed by
cgroup_rmdir(), this can be safely moved to the end of cgroup_rmdir().
This will help simplifying cgroup locking and shouldn't introduce any
behavior difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Move cgroup_lock_live_group() invocation upwards to right below
cgroup_tree_mutex in cgroup_subtree_control_write(). This is to help
the planned locking simplification.
This doesn't make any userland-visible behavioral changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
cgroup_mkdir() is the sole user of cgroup_create(). Let's collapse
the latter into the former. This will help simplifying locking.
While at it, remove now stale comment about inode locking.
This patch doesn't introduce any functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Reorganize cgroup_create() so that all paths share unlock out path.
* All err_* labels are renamed to out_* as they're now shared by both
success and failure paths.
* @err renamed to @ret for the similar reason as above and so that
it's more consistent with other functions.
* cgroup memory allocation moved after locking so that freeing failed
cgroup happens before unlocking. While this moves more code inside
critical section, memory allocations inside cgroup locking are
already pretty common and this is unlikely to make any noticeable
difference.
* While at it, replace a stray @parent->root dereference with @root.
This reorganization will help simplifying locking.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Now that cgroup_subtree_control_write() has access to the associated
kernfs_open_file and thus the kernfs_node, there's no need to cache it
in cgroup->control_kn on creation. Remove cgroup->control_kn and use
@of->kn directly.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
cgroup_tasks_write() and cgroup_procs_write() are currently using
cftype->write_u64(). This patch converts them to use cftype->write()
instead. This allows access to the associated kernfs_open_file which
will be necessary to implement the planned kernfs active protection
manipulation for these files.
This shifts buffer parsing to attach_task_by_pid() and makes it return
@nbytes on success. Let's rename it to __cgroup_procs_write() to
clearly indicate that this is a write handler implementation.
This patch doesn't introduce any visible behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
cftype->trigger() is pointless. It's trivial to ignore the input
buffer from a regular ->write() operation. Convert all ->trigger()
users to ->write() and remove ->trigger().
This patch doesn't introduce any visible behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Convert all cftype->write_string() users to the new cftype->write()
which maps directly to kernfs write operation and has full access to
kernfs and cgroup contexts. The conversions are mostly mechanical.
* @css and @cft are accessed using of_css() and of_cft() accessors
respectively instead of being specified as arguments.
* Should return @nbytes on success instead of 0.
* @buf is not trimmed automatically. Trim if necessary. Note that
blkcg and netprio don't need this as the parsers already handle
whitespaces.
cftype->write_string() has no user left after the conversions and
removed.
While at it, remove unnecessary local variable @p in
cgroup_subtree_control_write() and stale comment about
CGROUP_LOCAL_BUFFER_SIZE in cgroup_freezer.c.
This patch doesn't introduce any visible behavior changes.
v2: netprio was missing from conversion. Converted.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Aristeu Rozanski <arozansk@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: "David S. Miller" <davem@davemloft.net>
During the recent conversion to kernfs, cftype's seq_file operations
are updated so that they are directly mapped to kernfs operations and
thus can fully access the associated kernfs and cgroup contexts;
however, write path hasn't seen similar updates and none of the
existing write operations has access to, for example, the associated
kernfs_open_file.
Let's introduce a new operation cftype->write() which maps directly to
the kernfs write operation and has access to all the arguments and
contexts. This will replace ->write_string() and ->trigger() and ease
manipulation of kernfs active protection from cgroup file operations.
Two accessors - of_cft() and of_css() - are introduced to enable
accessing the associated cgroup context from cftype->write() which
only takes kernfs_open_file for the context information. The
accessors for seq_file operations - seq_cft() and seq_css() - are
rewritten to wrap the of_ accessors.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Unlike the more usual refcnting, what css_tryget() provides is the
distinction between online and offline csses instead of protection
against upping a refcnt which already reached zero. cgroup is
planning to provide actual tryget which fails if the refcnt already
reached zero. Let's rename the existing trygets so that they clearly
indicate that they're onliness.
I thought about keeping the existing names as-are and introducing new
names for the planned actual tryget; however, given that each
controller participates in the synchronization of the online state, it
seems worthwhile to make it explicit that these functions are about
on/offline state.
Rename css_tryget() to css_tryget_online() and css_tryget_from_dir()
to css_tryget_online_from_dir(). This is pure rename.
v2: cgroup_freezer grew new usages of css_tryget(). Update
accordingly.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
release_path is now protected by release_agent_path_lock to allow
accessing it without grabbing cgroup_mutex; however,
cgroup_release_agent_show() was still grabbing cgroup_mutex. Let's
convert it to release_agent_path_lock so that we don't have to worry
about this one for the planned locking updates.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
After waiting for a child to finish offline,
cgroup_subtree_control_write() jumps up to retry from after the input
parsing and active protection breaking. This retry makes the
scheduled locking update - removal of cgroup_tree_mutex - more
difficult. Let's simplify it by returning with restart_syscall() for
retries.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
I was confused that strsep() was equivalent to strtok_r() in skipping
over consecutive delimiters. strsep() just splits at the first
occurrence of one of the delimiters which makes the parsing very
inflexible, which makes allowing multiple whitespace chars as
delimters kinda moot. Let's just be consistently strict and require
list of tokens separated by spaces. This is what
Documentation/cgroups/unified-hierarchy.txt describes too.
Also, parsing may access beyond the end of the string if the string
ends with spaces or is zero-length. Make sure it skips zero-length
tokens. Note that this also ensures that the parser doesn't puke on
multiple consecutive spaces.
v2: Add zero-length token skipping.
v3: Added missing space after "==". Spotted by Li.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
c1a71504e9 ("cgroup: don't recycle cgroup id until all csses' have
been destroyed") made cgroup ID persist until a cgroup is released and
add cgroup->subsys[] clearing to css_release() so that css_from_id()
doesn't return a css which has already been released which happens
before cgroup release; however, the right change here was updating
offline_css() to clear cgroup->subsys[] which was done by e329780310
("cgroup: cgroup->subsys[] should be cleared after the css is
offlined") instead of clearing it from css_release().
We're now clearing cgroup->subsys[] twice. This is okay for
traditional hierarchies as a css's lifetime is the same as its
cgroup's; however, this confuses unified hierarchy and turning on and
off a controller repeatedly using "cgroup.subtree_control" can lead to
an oops like the following which happens because cgroup->subsys[] is
incorrectly cleared asynchronously by css_release().
BUG: unable to handle kernel NULL pointer dereference at 00000000000000 08
IP: [<ffffffff81130c11>] kill_css+0x21/0x1c0
PGD 1170d067 PUD f0ab067 PMD 0
Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
Modules linked in:
CPU: 2 PID: 459 Comm: bash Not tainted 3.15.0-rc2-work+ #5
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
task: ffff880009296710 ti: ffff88000e198000 task.ti: ffff88000e198000
RIP: 0010:[<ffffffff81130c11>] [<ffffffff81130c11>] kill_css+0x21/0x1c0
RSP: 0018:ffff88000e199dc8 EFLAGS: 00010202
RAX: 0000000000000001 RBX: 0000000000000000 RCX: 0000000000000001
RDX: 0000000000000001 RSI: ffffffff8238a968 RDI: ffff880009296f98
RBP: ffff88000e199de0 R08: 0000000000000001 R09: 02b0000000000000
R10: 0000000000000000 R11: ffff880009296fc0 R12: 0000000000000001
R13: ffff88000db6fc58 R14: 0000000000000001 R15: ffff8800139dcc00
FS: 00007ff9160c5740(0000) GS:ffff88001fb00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000008 CR3: 0000000013947000 CR4: 00000000000006e0
Stack:
ffff88000e199de0 ffffffff82389160 0000000000000001 ffff88000e199e80
ffffffff8113537f 0000000000000007 ffff88000e74af00 ffff88000e199e48
ffff880009296710 ffff88000db6fc00 ffffffff8239c100 0000000000000002
Call Trace:
[<ffffffff8113537f>] cgroup_subtree_control_write+0x85f/0xa00
[<ffffffff8112fd18>] cgroup_file_write+0x38/0x1d0
[<ffffffff8126fc97>] kernfs_fop_write+0xe7/0x170
[<ffffffff811f2ae6>] vfs_write+0xb6/0x1c0
[<ffffffff811f35ad>] SyS_write+0x4d/0xc0
[<ffffffff81d0acd2>] system_call_fastpath+0x16/0x1b
Code: 5c 41 5d 41 5e 41 5f 5d c3 90 0f 1f 44 00 00 55 48 89 e5 41 54 53 48 89 fb 48 83 ec 08 8b 05 37 ad 29 01 85 c0 0f 85 df 00 00 00 <48> 8b 43 08 48 8b 3b be 01 00 00 00 8b 48 5c d3 e6 e8 49 ff ff
RIP [<ffffffff81130c11>] kill_css+0x21/0x1c0
RSP <ffff88000e199dc8>
CR2: 0000000000000008
---[ end trace e7aae1f877c4e1b4 ]---
Remove the unnecessary cgroup->subsys[] clearing from css_release().
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
cgroup_idr_remove() can be invoked from bh leading to lockdep
detecting possible AA deadlock (IN_BH/ON_BH). Make the lock bh-safe.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
cgroup_subtree_control_write() waits for offline to complete
child-by-child before enabling a controller; however, it has a couple
bugs.
* It doesn't initialize the wait_queue_t. This can lead to infinite
hang on the following schedule() among other things.
* It forgets to pin the child before releasing cgroup_tree_mutex and
performing schedule(). The child may already be gone by the time it
wakes up and invokes finish_wait(). Pin the child being waited on.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Pull to receive e37a06f109 ("cgroup: fix the retry path of
cgroup_mount()") to avoid unnecessary conflicts with planned
cgroup_tree_mutex removal and also to be able to remove the temp fix
added by 36c38fb714 ("blkcg: use trylock on blkcg_pol_mutex in
blkcg_reset_stats()") afterwards.
Signed-off-by: Tejun Heo <tj@kernel.org>
While updating cgroup_freezer locking, 68fafb77d827 ("cgroup_freezer:
replace freezer->lock with freezer_mutex") introduced a bug in
update_if_frozen() where it returns with rcu_read_lock() held. Fix it
by adding rcu_read_unlock() before returning.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
After 96d365e0b8 ("cgroup: make css_set_lock a rwsem and rename it
to css_set_rwsem"), css task iterators requires sleepable context as
it may block on css_set_rwsem. I missed that cgroup_freezer was
iterating tasks under IRQ-safe spinlock freezer->lock. This leads to
errors like the following on freezer state reads and transitions.
BUG: sleeping function called from invalid context at /work
/os/work/kernel/locking/rwsem.c:20
in_atomic(): 0, irqs_disabled(): 0, pid: 462, name: bash
5 locks held by bash/462:
#0: (sb_writers#7){.+.+.+}, at: [<ffffffff811f0843>] vfs_write+0x1a3/0x1c0
#1: (&of->mutex){+.+.+.}, at: [<ffffffff8126d78b>] kernfs_fop_write+0xbb/0x170
#2: (s_active#70){.+.+.+}, at: [<ffffffff8126d793>] kernfs_fop_write+0xc3/0x170
#3: (freezer_mutex){+.+...}, at: [<ffffffff81135981>] freezer_write+0x61/0x1e0
#4: (rcu_read_lock){......}, at: [<ffffffff81135973>] freezer_write+0x53/0x1e0
Preemption disabled at:[<ffffffff81104404>] console_unlock+0x1e4/0x460
CPU: 3 PID: 462 Comm: bash Not tainted 3.15.0-rc1-work+ #10
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
ffff88000916a6d0 ffff88000e0a3da0 ffffffff81cf8c96 0000000000000000
ffff88000e0a3dc8 ffffffff810cf4f2 ffffffff82388040 ffff880013aaf740
0000000000000002 ffff88000e0a3de8 ffffffff81d05974 0000000000000246
Call Trace:
[<ffffffff81cf8c96>] dump_stack+0x4e/0x7a
[<ffffffff810cf4f2>] __might_sleep+0x162/0x260
[<ffffffff81d05974>] down_read+0x24/0x60
[<ffffffff81133e87>] css_task_iter_start+0x27/0x70
[<ffffffff8113584d>] freezer_apply_state+0x5d/0x130
[<ffffffff81135a16>] freezer_write+0xf6/0x1e0
[<ffffffff8112eb88>] cgroup_file_write+0xd8/0x230
[<ffffffff8126d7b7>] kernfs_fop_write+0xe7/0x170
[<ffffffff811f0756>] vfs_write+0xb6/0x1c0
[<ffffffff811f121d>] SyS_write+0x4d/0xc0
[<ffffffff81d08292>] system_call_fastpath+0x16/0x1b
freezer->lock used to be used in hot paths but that time is long gone
and there's no reason for the lock to be IRQ-safe spinlock or even
per-cgroup. In fact, given the fact that a cgroup may contain large
number of tasks, it's not a good idea to iterate over them while
holding IRQ-safe spinlock.
Let's simplify locking by replacing per-cgroup freezer->lock with
global freezer_mutex. This also makes the comments explaining the
intricacies of policy inheritance and the locking around it as the
states are protected by a common mutex.
The conversion is mostly straight-forward. The followings are worth
mentioning.
* freezer_css_online() no longer needs double locking.
* freezer_attach() now performs propagation simply while holding
freezer_mutex. update_if_frozen() race no longer exists and the
comment is removed.
* freezer_fork() now tests whether the task is in root cgroup using
the new task_css_is_root() without doing rcu_read_lock/unlock(). If
not, it grabs freezer_mutex and performs the operation.
* freezer_read() and freezer_change_state() grab freezer_mutex across
the whole operation and pin the css while iterating so that each
descendant processing happens in sleepable context.
Fixes: 96d365e0b8 ("cgroup: make css_set_lock a rwsem and rename it to css_set_rwsem")
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Determining the css of a task usually requires RCU read lock as that's
the only thing which keeps the returned css accessible till its
reference is acquired; however, testing whether a task belongs to the
root can be performed without dereferencing the returned css by
comparing the returned pointer against the root one in init_css_set[]
which never changes.
Implement task_css_is_root() which can be invoked in any context.
This will be used by the scheduled cgroup_freezer change.
v2: cgroup no longer supports modular controllers. No need to export
init_css_set. Pointed out by Li.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Pull workqueue fixes from Tejun Heo:
"Fixes for two bugs in workqueue.
One is exiting with internal mutex held in a failure path of
wq_update_unbound_numa(). The other is a subtle and unlikely
use-after-possible-last-put in the rescuer logic. Both have been
around for quite some time now and are unlikely to have triggered
noticeably often. All patches are marked for -stable backport"
* 'for-3.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: fix a possible race condition between rescuer and pwq-release
workqueue: make rescuer_thread() empty wq->maydays list before exiting
workqueue: fix bugs in wq_update_unbound_numa() failure path
Pull cgroup fixes from Tejun Heo:
"During recent restructuring, device_cgroup unified config input check
and enforcement logic; unfortunately, it turned out to share too much.
Aristeu's patches fix the breakage and marked for -stable backport.
The other two patches are fallouts from kernfs conversion. The blkcg
change is temporary and will go away once kernfs internal locking gets
simplified (patches pending)"
* 'for-3.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
blkcg: use trylock on blkcg_pol_mutex in blkcg_reset_stats()
device_cgroup: check if exception removal is allowed
device_cgroup: fix the comment format for recently added functions
device_cgroup: rework device access check and exception checking
cgroup: fix the retry path of cgroup_mount()
is_error_status() is an inline function always called with the
global time_status as an argument, so there's zero functional
difference with this change, but the non-CONFIG_NTP_PPS version
uses the passed-in argument, while the CONFIG_NTP_PPS one ignores
its argument and uses the global.
Looks like is_error_status was refactored out, but someone forgot
to change the logic to check the local argument value.
Thus this patch makes it use the argument always; shorter variable
names are good.
Signed-off-by: George Spelvin <linux@horizon.com>
[jstultz: Tweaked commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
tj: Refreshed on top of wq/for-3.16.
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Tejun Heo <tj@kernel.org>
Conflicts:
drivers/net/ethernet/altera/altera_sgdma.c
net/netlink/af_netlink.c
net/sched/cls_api.c
net/sched/sch_api.c
The netlink conflict dealt with moving to netlink_capable() and
netlink_ns_capable() in the 'net' tree vs. supporting 'tc' operations
in non-init namespaces. These were simple transformations from
netlink_capable to netlink_ns_capable.
The Altera driver conflict was simply code removal overlapping some
void pointer cast cleanups in net-next.
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace obsolete function simple_strtol w/ kstrtol
Inspired-By: Andrew Morton <akpm@linux-foundation.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Fabian Frederick <fabf@skynet.be>
[jstultz: Tweak commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Replace obsolete function.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull x86 fixes from Peter Anvin:
"A somewhat unpleasantly large collection of small fixes. The big ones
are the __visible tree sweep and a fix for 'earlyprintk=efi,keep'. It
was using __init functions with predictably suboptimal results.
Another key fix is a build fix which would produce output that simply
would not decompress correctly in some configuration, due to the
existing Makefiles picking up an unfortunate local label and mistaking
it for the global symbol _end.
Additional fixes include the handling of 64-bit numbers when setting
the vdso data page (a latent bug which became manifest when i386
started exporting a vdso with time functions), a fix to the new MSR
manipulation accessors which would cause features to not get properly
unblocked, a build fix for 32-bit userland, and a few new platform
quirks"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, vdso, time: Cast tv_nsec to u64 for proper shifting in update_vsyscall()
x86: Fix typo in MSR_IA32_MISC_ENABLE_LIMIT_CPUID macro
x86: Fix typo preventing msr_set/clear_bit from having an effect
x86/intel: Add quirk to disable HPET for the Baytrail platform
x86/hpet: Make boot_hpet_disable extern
x86-64, build: Fix stack protector Makefile breakage with 32-bit userland
x86/reboot: Add reboot quirk for Certec BPC600
asmlinkage: Add explicit __visible to drivers/*, lib/*, kernel/*
asmlinkage, x86: Add explicit __visible to arch/x86/*
asmlinkage: Revert "lto: Make asmlinkage __visible"
x86, build: Don't get confused by local symbols
x86/efi: earlyprintk=efi,keep fix
The first is a long standing bug that causes bogus data to show up
in the refcnt field of the module_refcnt tracepoint. It was
introduced by a merge conflict resolution back in 2.6.35-rc days.
The result should be refcnt = incs - decs, but instead it did
refcnt = incs + decs.
The second fix is to a bug that was introduced in this merge window
that allowed for a tracepoint funcs pointer to be used after it
was freed. Moving the location of where the probes are released
solved the problem.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTa/GQAAoJEKQekfcNnQGuGGUIAJCkrDZdnliE6f6Ur8aXJoX7
gjkXRMmCjLM/X8yQc1H8YwDbSgaTQNmeyQvBbBZ1hUQBaMf5ft4KuFYMGvQRk3jp
ZheQVumSzsQfO+yp5dRmzJ6H2G0BCInxq9VZyufZkCPUGsMyiIc+7+SGHEfjMgmW
9XFWyfSr09thVlGanr+OTLXfwFm7GMD9nohLKXh9dhi/tO/gHq6lI83HK42Y1bWG
4fZWJjO5GgCVbW4RanB6yr9RIe8NESKl37JYsAZX61iAvT8/mqIYGWx0i/DEGN5Q
ap3WW5QPALLUlvUVgI9Um0KOrotbmKtnRwPeHYDmSQODwuKj5veiLXxL9XdHPLU=
=lt0T
-----END PGP SIGNATURE-----
Merge tag 'trace-fixes-v3.15-rc4-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"This contains two fixes.
The first is a long standing bug that causes bogus data to show up in
the refcnt field of the module_refcnt tracepoint. It was introduced
by a merge conflict resolution back in 2.6.35-rc days.
The result should be 'refcnt = incs - decs', but instead it did
'refcnt = incs + decs'.
The second fix is to a bug that was introduced in this merge window
that allowed for a tracepoint funcs pointer to be used after it was
freed. Moving the location of where the probes are released solved
the problem"
* tag 'trace-fixes-v3.15-rc4-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracepoint: Fix use of tracepoint funcs after rcu free
trace: module: Maintain a valid user count
Commit de7b297390 "tracepoint: Use struct pointer instead of name hash
for reg/unreg tracepoints" introduces a use after free by calling
release_probes on the old struct tracepoint array before the newly
allocated array is published with rcu_assign_pointer. There is a race
window where tracepoints (RCU readers) can perform a
"use-after-grace-period-after-free", which shows up as a GPF in
stress-tests.
Link: http://lkml.kernel.org/r/53698021.5020108@oracle.com
Link: http://lkml.kernel.org/p/1399549669-25465-1-git-send-email-mathieu.desnoyers@efficios.com
Reported-by: Sasha Levin <sasha.levin@oracle.com>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Dave Jones <davej@redhat.com>
Fixes: de7b297390 "tracepoint: Use struct pointer instead of name hash for reg/unreg tracepoints"
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The only value ever returned by cpuidle_idle_call() is 0 and its
only caller ignores that value anyway, so make it void.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/4717784.WmVEpDoliM@vostro.rjw.lan
Signed-off-by: Ingo Molnar <mingo@kernel.org>
With the generic idle functions assuming !polling we should only clear
the polling bit at the very last opportunity in order to avoid
spurious IPIs.
Ideally we'd flip the default to polling, but that means auditing all
arch idle functions.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-vq7719foqzf6z5h4j7eh7f9e@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Because mwait_idle_with_hints() gets called from !idle context it must
call current_clr_polling(). This however means that resched_task() is
very likely to send an IPI even when we were polling:
CPU0 CPU1
if (current_set_polling_and_test())
goto out;
__monitor(&ti->flags);
if (!need_resched())
__mwait(eax, ecx);
set_tsk_need_resched(p);
smp_mb();
out:
current_clr_polling();
if (!tsk_is_polling(p))
smp_send_reschedule(cpu);
So while it is correct (extra IPIs aren't a problem, whereas a missed
IPI would be) it is a performance problem (for some).
Avoid this issue by using fetch_or() to atomically set NEED_RESCHED
and test if POLLING_NRFLAG is set.
Since a CPU stuck in mwait is unlikely to modify the flags word,
contention on the cmpxchg is unlikely and thus we should mostly
succeed in a single go.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-kf5suce6njh5xf5d3od13rr0@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Instead of jumping through hoops to make sure to find (and exit) each
event, do it the simple straight fwd way.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-tij931199thfkys8vbnokdpf@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Primarily make perf_event_release_kernel() into put_event(), this will
allow kernel space to create per-task inherited events, and is safer
in general.
Also, document the free_event() assumptions.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-rk9pvr6e1d0559lxstltbztc@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit 38b435b16c ("perf: Fix tear-down of inherited group events")
states that we need to destroy groups for inherited events, but it
doesn't make any sense to not also destroy groups for normal events.
And while it usually makes no difference (the normal events won't
leak, and its very likely all the group events will die in quick
succession) it does make the code more consistent and closes a
potential hole for trouble.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-426egt8zmsm12d2q8k2xz4tt@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Make sure all events in a group have the same inherit state. It was
possible for group leaders to have inherit set while sibling events
would not have inherit set.
In this case we'd still inherit the siblings, leading to some
non-fatal weirdness.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-r32tt8yldvic3jlcghd3g35u@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It was found that when running some workloads (such as AIM7) on large
systems with many cores, CPUs do not remain idle for long. Thus, tasks
can wake/get enqueued while doing idle balancing.
In this patch, while traversing the domains in idle balance, in
addition to checking for pulled_task, we add an extra check for
this_rq->nr_running for determining if we should stop searching for
tasks to pull. If there are runnable tasks on this rq, then we will
stop traversing the domains. This reduces the chance that idle balance
delays a task from running.
This patch resulted in approximately a 6% performance improvement when
running a Java Server workload on an 8 socket machine.
Signed-off-by: Jason Low <jason.low2@hp.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: daniel.lezcano@linaro.org
Cc: alex.shi@linaro.org
Cc: preeti@linux.vnet.ibm.com
Cc: efault@gmx.de
Cc: vincent.guittot@linaro.org
Cc: morten.rasmussen@arm.com
Cc: aswin@hp.com
Cc: chegu_vinod@hp.com
Link: http://lkml.kernel.org/r/1398303035-18255-4-git-send-email-jason.low2@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
A new flag SD_SHARE_POWERDOMAIN is created to reflect whether groups of CPUs
in a sched_domain level can or not reach different power state. As an example,
the flag should be cleared at CPU level if groups of cores can be power gated
independently. This information can be used in the load balance decision or to
add load balancing level between group of CPUs that can power gate
independantly.
This flag is part of the topology flags that can be set by arch.
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: schwidefsky@de.ibm.com
Cc: cmetcalf@tilera.com
Cc: benh@kernel.crashing.org
Cc: preeti@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/1397209481-28542-5-git-send-email-vincent.guittot@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We replace the old way to configure the scheduler topology with a new method
which enables a platform to declare additionnal level (if needed).
We still have a default topology table definition that can be used by platform
that don't want more level than the SMT, MC, CPU and NUMA ones. This table can
be overwritten by an arch which either wants to add new level where a load
balance make sense like BOOK or powergating level or wants to change the flags
configuration of some levels.
For each level, we need a function pointer that returns cpumask for each cpu,
a function pointer that returns the flags for the level and a name. Only flags
that describe topology, can be set by an architecture. The current topology
flags are:
SD_SHARE_CPUPOWER
SD_SHARE_PKG_RESOURCES
SD_NUMA
SD_ASYM_PACKING
Then, each level must be a subset on the next one. The build sequence of the
sched_domain will take care of removing useless levels like those with 1 CPU
and those with the same CPU span and no more relevant information for
load balancing than its children.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jason Low <jason.low2@hp.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux390@de.ibm.com
Cc: linux-ia64@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Link: http://lkml.kernel.org/r/1397209481-28542-2-git-send-email-vincent.guittot@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Setting the numa_preferred_node for a task in task_numa_migrate
does nothing on a 2-node system. Either we migrate to the node
that already was our preferred node, or we stay where we were.
On a 4-node system, it can slightly decrease overhead, by not
calling the NUMA code as much. Since every node tends to be
directly connected to every other node, running on the wrong
node for a while does not do much damage.
However, on an 8 node system, there are far more bad nodes
than there are good ones, and pretending that a second choice
is actually the preferred node can greatly delay, or even
prevent, a workload from converging.
The only time we can safely pretend that a second choice
node is the preferred node is when the task is part of a
workload that spans multiple NUMA nodes.
Signed-off-by: Rik van Riel <riel@redhat.com>
Tested-by: Vinod Chegu <chegu_vinod@hp.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1397235629-16328-4-git-send-email-riel@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When tasks have not converged on their preferred nodes yet, we want
to retry fairly often, to make sure we do not migrate a task's memory
to an undesirable location, only to have to move it again later.
This patch reduces the interval at which migration is retried,
when the task's numa_scan_period is small.
Signed-off-by: Rik van Riel <riel@redhat.com>
Tested-by: Vinod Chegu <chegu_vinod@hp.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1397235629-16328-3-git-send-email-riel@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The NUMA code is smart enough to distribute the memory of workloads
that span multiple NUMA nodes across those NUMA nodes.
However, it still has a pretty high scan rate for such workloads,
because any memory that is left on a node other than the node of
the CPU that faulted on the memory is counted as non-local, which
causes the scan rate to go up.
Counting the memory on any node where the task's numa group is
actively running as local, allows the scan rate to slow down
once the application is settled in.
This should reduce the overhead of the automatic NUMA placement
code, when a workload spans multiple NUMA nodes.
Signed-off-by: Rik van Riel <riel@redhat.com>
Tested-by: Vinod Chegu <chegu_vinod@hp.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1397235629-16328-2-git-send-email-riel@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The following commit:
e5fc66119e ("sched: Fix race in idle_balance()")
can potentially cause rq->max_idle_balance_cost to not be updated,
even when load_balance(NEWLY_IDLE) is attempted and the per-sd
max cost value is updated.
Preeti noticed a similar issue with updating rq->next_balance.
In this patch, we fix this by making sure we still check/update those values
even if a task gets enqueued while browsing the domains.
Signed-off-by: Jason Low <jason.low2@hp.com>
Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: morten.rasmussen@arm.com
Cc: aswin@hp.com
Cc: daniel.lezcano@linaro.org
Cc: alex.shi@linaro.org
Cc: efault@gmx.de
Cc: vincent.guittot@linaro.org
Link: http://lkml.kernel.org/r/1398725155-7591-2-git-send-email-jason.low2@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tim wrote:
"The current code will call pick_next_task_fair a second time in the
slow path if we did not pull any task in our first try. This is
really unnecessary as we already know no task can be pulled and it
doubles the delay for the cpu to enter idle.
We instrumented some network workloads and that saw that
pick_next_task_fair is frequently called twice before a cpu enters
idle. The call to pick_next_task_fair can add non trivial latency as
it calls load_balance which runs find_busiest_group on an hierarchy of
sched domains spanning the cpus for a large system. For some 4 socket
systems, we saw almost 0.25 msec spent per call of pick_next_task_fair
before a cpu can be idled."
Optimize the second call away for the common case and document the
dependency.
Reported-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Len Brown <len.brown@intel.com>
Link: http://lkml.kernel.org/r/20140424100047.GP11096@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The check at the beginning of cpupri_find() makes sure that the task_pri
variable does not exceed the cp->pri_to_cpu array length. But that length
is CPUPRI_NR_PRIORITIES not MAX_RT_PRIO, where it will miss the last two
priorities in that array.
As task_pri is computed from convert_prio() which should never be bigger
than CPUPRI_NR_PRIORITIES, if the check should cause a panic if it is
hit.
Reported-by: Mike Galbraith <umgwanakikbuti@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1397015410.5212.13.camel@marge.simpson.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
yield_task_dl() is broken:
o it forces current to be throttled setting its runtime to zero;
o it sets current's dl_se->dl_new to one, expecting that dl_task_timer()
will queue it back with proper parameters at replenish time.
Unfortunately, dl_task_timer() has this check at the very beginning:
if (!dl_task(p) || dl_se->dl_new)
goto unlock;
So, it just bails out and the task is never replenished. It actually
yielded forever.
To fix this, introduce a new flag indicating that the task properly yielded
the CPU before its current runtime expired. While this is a little overdoing
at the moment, the flag would be useful in the future to discriminate between
"good" jobs (of which remaining runtime could be reclaimed, i.e. recycled)
and "bad" jobs (for which dl_throttled task has been set) that needed to be
stopped.
Reported-by: yjay.kim <yjay.kim@lge.com>
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140429103953.e68eba1b2ac3309214e3dc5a@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Russell reported, that irqtime_account_idle_ticks() takes ages due to:
for (i = 0; i < ticks; i++)
irqtime_account_process_tick(current, 0, rq);
It's sad, that this code was written way _AFTER_ the NOHZ idle
functionality was available. I charge myself guitly for not paying
attention when that crap got merged with commit abb74cefa ("sched:
Export ns irqtimes through /proc/stat")
So instead of looping nr_ticks times just apply the whole thing at
once.
As a side note: The whole cputime_t vs. u64 business in that context
wants to be cleaned up as well. There is no point in having all these
back and forth conversions. Lets standardise on u64 nsec for all
kernel internal accounting and be done with it. Everything else does
not make sense at all for fine grained accounting. Frederic, can you
please take care of that?
Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Venkatesh Pallipadi <venki@google.com>
Cc: Shaun Ruffell <sruffell@digium.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1405022307000.6261@ionos.tec.linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When removing a (sibling) event we do:
raw_spin_lock_irq(&ctx->lock);
perf_group_detach(event);
raw_spin_unlock_irq(&ctx->lock);
<hole>
perf_remove_from_context(event);
raw_spin_lock_irq(&ctx->lock);
...
raw_spin_unlock_irq(&ctx->lock);
Now, assuming the event is a sibling, it will be 'unreachable' for
things like ctx_sched_out() because that iterates the
groups->siblings, and we just unhooked the sibling.
So, if during <hole> we get ctx_sched_out(), it will miss the event
and not call event_sched_out() on it, leaving it programmed on the
PMU.
The subsequent perf_remove_from_context() call will find the ctx is
inactive and only call list_del_event() to remove the event from all
other lists.
Hereafter we can proceed to free the event; while still programmed!
Close this hole by moving perf_group_detach() inside the same
ctx->lock region(s) perf_remove_from_context() has.
The condition on inherited events only in __perf_event_exit_task() is
likely complete crap because non-inherited events are part of groups
too and we're tearing down just the same. But leave that for another
patch.
Most-likely-Fixes: e03a9a55b4 ("perf: Change close() semantics for group events")
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Tested-by: Vince Weaver <vincent.weaver@maine.edu>
Much-staring-at-traces-by: Vince Weaver <vincent.weaver@maine.edu>
Much-staring-at-traces-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140505093124.GN17778@laptop.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
If freeze_enter() is called, we want to bypass the current cpuidle
governor and always use the deepest available (that is, not disabled)
C-state, because we want to save as much energy as reasonably possible
then and runtime latency constraints don't matter at that point, since
the system is in a sleep state anyway.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Aubrey Li <aubrey.li@linux.intel.com>
This patch also converts seq_printf to seq_puts
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Acked-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Replace uses of &__get_cpu_var for address calculation with this_cpu_ptr.
Link: http://lkml.kernel.org/p/alpine.DEB.2.10.1404291415560.18364@gentwo.org
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As requested by Linus add explicit __visible to the asmlinkage users.
This marks functions visible to assembler.
Tree sweep for rest of tree.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1398984278-29319-4-git-send-email-andi@firstfloor.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Pull networking fixes from David Miller:
1) e1000e computes header length incorrectly wrt vlans, fix from Vlad
Yasevich.
2) ns_capable() check in sock_diag netlink code, from Andrew
Lutomirski.
3) Fix invalid queue pairs handling in virtio_net, from Amos Kong.
4) Checksum offloading busted in sxgbe driver due to incorrect
descriptor layout, fix from Byungho An.
5) Fix build failure with SMC_DEBUG set to 2 or larger, from Zi Shen
Lim.
6) Fix uninitialized A and X registers in BPF interpreter, from Alexei
Starovoitov.
7) Fix arch dependencies of candence driver.
8) Fix netlink capabilities checking tree-wide, from Eric W Biederman.
9) Don't dump IFLA_VF_PORTS if netlink request didn't ask for it in
IFLA_EXT_MASK, from David Gibson.
10) IPV6 FIB dump restart doesn't handle table changes that happen
meanwhile, causing the code to loop forever or emit dups, fix from
Kumar Sandararajan.
11) Memory leak on VF removal in bnx2x, from Yuval Mintz.
12) Bug fixes for new Altera TSE driver from Vince Bridgers.
13) Fix route lookup key in SCTP, from Xugeng Zhang.
14) Use BH blocking spinlocks in SLIP, as per a similar fix to CAN/SLCAN
driver. From Oliver Hartkopp.
15) TCP doesn't bump retransmit counters in some code paths, fix from
Eric Dumazet.
16) Clamp delayed_ack in tcp_cubic to prevent theoretical divides by
zero. Fix from Liu Yu.
17) Fix locking imbalance in error paths of HHF packet scheduler, from
John Fastabend.
18) Properly reference the transport module when vsock_core_init() runs,
from Andy King.
19) Fix buffer overflow in cdc_ncm driver, from Bjørn Mork.
20) IP_ECN_decapsulate() doesn't see a correct SKB network header in
ip_tunnel_rcv(), fix from Ying Cai.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (132 commits)
net: macb: Fix race between HW and driver
net: macb: Remove 'unlikely' optimization
net: macb: Re-enable RX interrupt only when RX is done
net: macb: Clear interrupt flags
net: macb: Pass same size to DMA_UNMAP as used for DMA_MAP
ip_tunnel: Set network header properly for IP_ECN_decapsulate()
e1000e: Restrict MDIO Slow Mode workaround to relevant parts
e1000e: Fix issue with link flap on 82579
e1000e: Expand workaround for 10Mb HD throughput bug
e1000e: Workaround for dropped packets in Gig/100 speeds on 82579
net/mlx4_core: Don't issue PCIe speed/width checks for VFs
net/mlx4_core: Load the Eth driver first
net/mlx4_core: Fix slave id computation for single port VF
net/mlx4_core: Adjust port number in qp_attach wrapper when detaching
net: cdc_ncm: fix buffer overflow
Altera TSE: ALTERA_TSE should depend on HAS_DMA
vsock: Make transport the proto owner
net: sched: lock imbalance in hhf qdisc
net: mvmdio: Check for a valid interrupt instead of an error
net phy: Check for aneg completion before setting state to PHY_RUNNING
...
Until now, cgroup->id has been used to identify all the associated
csses and css_from_id() takes cgroup ID and returns the matching css
by looking up the cgroup and then dereferencing the css associated
with it; however, now that the lifetimes of cgroup and css are
separate, this is incorrect and breaks on the unified hierarchy when a
controller is disabled and enabled back again before the previous
instance is released.
This patch adds css->id which is a subsystem-unique ID and converts
css_from_id() to look up by the new css->id instead. memcg is the
only user of css_from_id() and also converted to use css->id instead.
For traditional hierarchies, this shouldn't make any functional
difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jianyu Zhan <nasa4836@gmail.com>
Acked-by: Li Zefan <lizefan@huawei.com>
init_css() takes the cgroup the new css belongs to as an argument and
initializes the new css's ->cgroup and ->parent pointers but doesn't
acquire the matching reference counts. After the previous patch,
create_css() puts init_css() and reference acquisition right next to
each other. Let's move reference acquistion into init_css() and
rename the function to init_and_link_css(). This makes sense and is
easier to follow. This makes the root csses to hold a reference on
cgrp_dfl_root.cgrp, which is harmless.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Currently, when create_css() fails in the middle, the half-initialized
css is freed by invoking cgroup_subsys->css_free() directly. This
patch updates the function so that it invokes RCU free path instead.
As the RCU free path puts the parent css and owning cgroup, their
references are now acquired right after a new css is successfully
allocated.
This doesn't make any visible difference now but is to enable
implementing css->id and RCU protected lookup by such IDs.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Currently, cgroup_root->cgroup_idr is protected by cgroup_mutex, which
ends up requiring cgroup_put() to be invoked under sleepable context.
This is okay for now but is an unusual requirement and we'll soon add
css->id which will have the same problem but won't be able to simply
grab cgroup_mutex as removal will have to happen from css_release()
which can't sleep.
Introduce cgroup_idr_lock and idr_alloc/replace/remove() wrappers
which protects the idr operations with the lock and use them for
cgroup_root->cgroup_idr. cgroup_put() no longer needs to grab
cgroup_mutex and css_from_id() is updated to always require RCU read
lock instead of either RCU read lock or cgroup_mutex, which doesn't
affect the existing users.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Currently, cgroup->id is allocated from 0, which is always assigned to
the root cgroup; unfortunately, memcg wants to use ID 0 to indicate
invalid IDs and ends up incrementing all IDs by one.
It's reasonable to reserve 0 for special purposes. This patch updates
cgroup core so that ID 0 is not used and the root cgroups get ID 1.
The ID incrementing is removed form memcg.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Li Zefan <lizefan@huawei.com>
There's no reason to use atomic bitops for cgroup_subsys_state->flags,
cgroup_root->flags and various subsys_masks. This patch updates those
to use bitwise and/or operations instead and converts them form
unsigned long to unsigned int.
This makes the fields occupy (marginally) smaller space and makes it
clear that they don't require atomicity.
This patch doesn't cause any behavior difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
It took me quite a while to understand how rwsem's count field
mainifested itself in different scenarios.
Add comments to provide a quick reference to the the rwsem's count
field for each scenario where readers and writers are contending
for the lock.
Hopefully it will be useful for future maintenance of the code and
for people to get up to speed on how the logic in the code works.
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: Alex Shi <alex.shi@linaro.org>
Cc: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Paul E.McKenney <paulmck@linux.vnet.ibm.com>
Cc: Jason Low <jason.low2@hp.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1399060437.2970.146.camel@schen9-DESK
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Till reported that the spurious interrupt detection of threaded
interrupts is broken in two ways:
- note_interrupt() is called for each action thread of a shared
interrupt line. That's wrong as we are only interested whether none
of the device drivers felt responsible for the interrupt, but by
calling multiple times for a single interrupt line we account
IRQ_NONE even if one of the drivers felt responsible.
- note_interrupt() when called from the thread handler is not
serialized. That leaves the members of irq_desc which are used for
the spurious detection unprotected.
To solve this we need to defer the spurious detection of a threaded
interrupt to the next hardware interrupt context where we have
implicit serialization.
If note_interrupt is called with action_ret == IRQ_WAKE_THREAD, we
check whether the previous interrupt requested a deferred check. If
not, we request a deferred check for the next hardware interrupt and
return.
If set, we check whether one of the interrupt threads signaled
success. Depending on this information we feed the result into the
spurious detector.
If one primary handler of a shared interrupt returns IRQ_HANDLED we
disable the deferred check of irq threads on the same line, as we have
found at least one device driver who cared.
Reported-by: Till Straumann <strauman@slac.stanford.edu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Austin Schuh <austin@peloton-tech.com>
Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: linux-can@vger.kernel.org
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1303071450130.22263@ionos
Pull irq fixes from Thomas Gleixner:
"This udpate delivers:
- A fix for dynamic interrupt allocation on x86 which is required to
exclude the GSI interrupts from the dynamic allocatable range.
This was detected with the newfangled tablet SoCs which have GPIOs
and therefor allocate a range of interrupts. The MSI allocations
already excluded the GSI range, so we never noticed before.
- The last missing set_irq_affinity() repair, which was delayed due
to testing issues
- A few bug fixes for the armada SoC interrupt controller
- A memory allocation fix for the TI crossbar interrupt controller
- A trivial kernel-doc warning fix"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: irq-crossbar: Not allocating enough memory
irqchip: armanda: Sanitize set_irq_affinity()
genirq: x86: Ensure that dynamic irq allocation does not conflict
linux/interrupt.h: fix new kernel-doc warnings
irqchip: armada-370-xp: Fix releasing of MSIs
irqchip: armada-370-xp: implement the ->check_device() msi_chip operation
irqchip: armada-370-xp: fix invalid cast of signed value into unsigned variable
Pull timer fixes from Thomas Gleixner:
"This update brings along:
- Two fixes for long standing bugs in the hrtimer code, one which
prevents remote enqueuing and the other preventing arbitrary delays
after a interrupt hang was detected
- A fix in the timer wheel which prevents math overflow
- A fix for a long standing issue with the architected ARM timer
related to the C3STOP mechanism.
- A trivial compile fix for nspire SoC clocksource"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timer: Prevent overflow in apply_slack
hrtimer: Prevent remote enqueue of leftmost timers
hrtimer: Prevent all reprogramming if hang detected
clocksource: nspire: Fix compiler warning
clocksource: arch_arm_timer: Fix age-old arch timer C3STOP detection issue
rcu_dereference(). It required rcu_dereference_sched() instead of
the normal rcu_dereference(). It produces a nasty RCU lockdep splat
due to the incorrect rcu notation.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTZF+rAAoJEKQekfcNnQGufrIH/1Wa1hzNoq8n1JmejythN6Yn
lQ9RvD0NFrKcO3wd8XyYUoRQXNZ0RJ6JJzERyNygVWp8zLF9TifywaFCZpyNEH91
58qidUdAEBaOMHB6WAVVg056kSC7QG5+kRzgFKktQNDac29Ykw2hJBrFoAAlkoi2
7slBOpnRnpgGn6cRU7hjCbaZs/RvVOJ9J00JeOWFFcM8vFcKMNZBypnwSpRCwc51
ZU8O4UhewqwXuTL35Lrnoaf6LZltkaudbRsc4/xgidT+S6djXU+6vnboerdBajh9
aWCNcI8WVV6UXkJ7X/Ft7i7gV181iCvU+vUVk9REXatEgH1RBTJlMhwgqH4fiLM=
=vEMu
-----END PGP SIGNATURE-----
Merge tag 'trace-fixes-v3.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"This is a small fix where the trigger code used the wrong
rcu_dereference(). It required rcu_dereference_sched() instead of the
normal rcu_dereference(). It produces a nasty RCU lockdep splat due
to the incorrect rcu notation"
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
* tag 'trace-fixes-v3.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Use rcu_dereference_sched() for trace event triggers
As trace event triggers are now part of the mainline kernel, I added
my trace event trigger tests to my test suite I run on all my kernels.
Now these tests get run under different config options, and one of
those options is CONFIG_PROVE_RCU, which checks under lockdep that
the rcu locking primitives are being used correctly. This triggered
the following splat:
===============================
[ INFO: suspicious RCU usage. ]
3.15.0-rc2-test+ #11 Not tainted
-------------------------------
kernel/trace/trace_events_trigger.c:80 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 1, debug_locks = 0
4 locks held by swapper/1/0:
#0: ((&(&j_cdbs->work)->timer)){..-...}, at: [<ffffffff8104d2cc>] call_timer_fn+0x5/0x1be
#1: (&(&pool->lock)->rlock){-.-...}, at: [<ffffffff81059856>] __queue_work+0x140/0x283
#2: (&p->pi_lock){-.-.-.}, at: [<ffffffff8106e961>] try_to_wake_up+0x2e/0x1e8
#3: (&rq->lock){-.-.-.}, at: [<ffffffff8106ead3>] try_to_wake_up+0x1a0/0x1e8
stack backtrace:
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.15.0-rc2-test+ #11
Hardware name: /DG965MQ, BIOS MQ96510J.86A.0372.2006.0605.1717 06/05/2006
0000000000000001 ffff88007e083b98 ffffffff819f53a5 0000000000000006
ffff88007b0942c0 ffff88007e083bc8 ffffffff81081307 ffff88007ad96d20
0000000000000000 ffff88007af2d840 ffff88007b2e701c ffff88007e083c18
Call Trace:
<IRQ> [<ffffffff819f53a5>] dump_stack+0x4f/0x7c
[<ffffffff81081307>] lockdep_rcu_suspicious+0x107/0x110
[<ffffffff810ee51c>] event_triggers_call+0x99/0x108
[<ffffffff810e8174>] ftrace_event_buffer_commit+0x42/0xa4
[<ffffffff8106aadc>] ftrace_raw_event_sched_wakeup_template+0x71/0x7c
[<ffffffff8106bcbf>] ttwu_do_wakeup+0x7f/0xff
[<ffffffff8106bd9b>] ttwu_do_activate.constprop.126+0x5c/0x61
[<ffffffff8106eadf>] try_to_wake_up+0x1ac/0x1e8
[<ffffffff8106eb77>] wake_up_process+0x36/0x3b
[<ffffffff810575cc>] wake_up_worker+0x24/0x26
[<ffffffff810578bc>] insert_work+0x5c/0x65
[<ffffffff81059982>] __queue_work+0x26c/0x283
[<ffffffff81059999>] ? __queue_work+0x283/0x283
[<ffffffff810599b7>] delayed_work_timer_fn+0x1e/0x20
[<ffffffff8104d3a6>] call_timer_fn+0xdf/0x1be^M
[<ffffffff8104d2cc>] ? call_timer_fn+0x5/0x1be
[<ffffffff81059999>] ? __queue_work+0x283/0x283
[<ffffffff8104d823>] run_timer_softirq+0x1a4/0x22f^M
[<ffffffff8104696d>] __do_softirq+0x17b/0x31b^M
[<ffffffff81046d03>] irq_exit+0x42/0x97
[<ffffffff81a08db6>] smp_apic_timer_interrupt+0x37/0x44
[<ffffffff81a07a2f>] apic_timer_interrupt+0x6f/0x80
<EOI> [<ffffffff8100a5d8>] ? default_idle+0x21/0x32
[<ffffffff8100a5d6>] ? default_idle+0x1f/0x32
[<ffffffff8100ac10>] arch_cpu_idle+0xf/0x11
[<ffffffff8107b3a4>] cpu_startup_entry+0x1a3/0x213
[<ffffffff8102a23c>] start_secondary+0x212/0x219
The cause is that the triggers are protected by rcu_read_lock_sched() but
the data is dereferenced with rcu_dereference() which expects it to
be protected with rcu_read_lock(). The proper reference should be
rcu_dereference_sched().
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: stable@vger.kernel.org # 3.14+
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Commit 4104d326b6 "ftrace: Remove global function list and call
function directly" cleaned up the global_ops filtering and made
the code simpler. But it left out function graph filtering which
also depended on that code. The function graph filtering still
needs to use global_ops as the filter otherwise it wont filter
at all.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
giving only false positives (now we finally figured out why).
Cheers,
Rusty.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=725P
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull module fixes from Rusty Russell:
"Fixed one missing place for the new taint flag, and remove a warning
giving only false positives (now we finally figured out why)"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
module: remove warning about waiting module removal.
Fix: tracing: use 'E' instead of 'X' for unsigned module taint flag
Reboot logic in kernel/reboot will avoid calling kernel_power_off
when pm_power_off is null, and instead uses kernel_halt. Change
hibernate's power_down to follow the behavior in the reboot call.
Calling the notifier twice (once for SYS_POWER_OFF and again for
SYS_HALT) causes a panic during hibernation on Kirkwood
Openblocks A6 board.
Signed-off-by: Sebastian Capella <sebastian.capella@linaro.org>
Reported-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since both cpuidle_enabled() and cpuidle_select() are only called by
cpuidle_idle_call(), it is not really useful to keep them separate
and combining them will help to avoid complicating cpuidle_idle_call()
even further if governors are changed to return error codes sometimes.
This code modification shouldn't lead to any functional changes.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
valid_vma() rejects the VM_SHARED vmas, but this still allows to insert
a probe into the MAP_SHARED but not VM_MAYWRITE vma.
Currently this is fine, such a mapping doesn't really differ from the
private read-only mmap except mprotect(PROT_WRITE) won't work. However,
get_user_pages(FOLL_WRITE | FOLL_FORCE) doesn't allow to COW in this
case, and it would be safer to follow the same conventions as mm even
if currently this happens to work.
After the recent cda540ace6 "mm: get_user_pages(write,force) refuse
to COW in shared areas" only uprobes can insert an anon page into the
shared file-backed area, lets stop this and change valid_vma() to check
VM_MAYSHARE instead.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
uprobe_perf_open()->uprobe_apply() can fail, but this error is wrongly
ignored. Change uprobe_perf_open() to do uprobe_perf_close() and return
the error code in this case.
Change uprobe_perf_close() to propogate the error from uprobe_apply()
as well, although it should not fail.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Preparation. Move uprobe_perf_close() up before uprobe_perf_open() to
avoid the forward declaration in the next patch and make it readable.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Now that the ring buffer has a built in way to wake up readers
when there's data, using irq_work such that it is safe to do it
in any context. But it was still using the old "poor man's"
wait polling that checks every 1/10 of a second to see if it
should wake up a waiter. This makes the latency for a wake up
excruciatingly long. No need to do that anymore.
Completely remove the different wait_poll types from the tracers
and have them all use the default one now.
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
On architectures with sizeof(int) < sizeof (long), the
computation of mask inside apply_slack() can be undefined if the
computed bit is > 32.
E.g. with: expires = 0xffffe6f5 and slack = 25, we get:
expires_limit = 0x20000000e
bit = 33
mask = (1 << 33) - 1 /* undefined */
On x86, mask becomes 1 and and the slack is not applied properly.
On s390, mask is -1, expires is set to 0 and the timer fires immediately.
Use 1UL << bit to solve that issue.
Suggested-by: Deborah Townsend <dstownse@us.ibm.com>
Signed-off-by: Jiri Bohac <jbohac@suse.cz>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20140418152310.GA13654@midget.suse.cz
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
If a cpu is idle and starts an hrtimer which is not pinned on that
same cpu, the nohz code might target the timer to a different cpu.
In the case that we switch the cpu base of the timer we already have a
sanity check in place, which determines whether the timer is earlier
than the current leftmost timer on the target cpu. In that case we
enqueue the timer on the current cpu because we cannot reprogram the
clock event device on the target.
If the timers base is already the target CPU we do not have this
sanity check in place so we enqueue the timer as the leftmost timer in
the target cpus rb tree, but we cannot reprogram the clock event
device on the target cpu. So the timer expires late and subsequently
prevents the reprogramming of the target cpu clock event device until
the previously programmed event fires or a timer with an earlier
expiry time gets enqueued on the target cpu itself.
Add the same target check as we have for the switch base case and
start the timer on the current cpu if it would become the leftmost
timer on the target.
[ tglx: Rewrote subject and changelog ]
Signed-off-by: Leon Ma <xindong.ma@intel.com>
Link: http://lkml.kernel.org/r/1398847391-5994-1-git-send-email-xindong.ma@intel.com
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
If the last hrtimer interrupt detected a hang it sets hang_detected=1
and programs the clock event device with a delay to let the system
make progress.
If hang_detected == 1, we prevent reprogramming of the clock event
device in hrtimer_reprogram() but not in hrtimer_force_reprogram().
This can lead to the following situation:
hrtimer_interrupt()
hang_detected = 1;
program ce device to Xms from now (hang delay)
We have two timers pending:
T1 expires 50ms from now
T2 expires 5s from now
Now T1 gets canceled, which causes hrtimer_force_reprogram() to be
invoked, which in turn programs the clock event device to T2 (5
seconds from now).
Any hrtimer_start after that will not reprogram the hardware due to
hang_detected still being set. So we effectivly block all timers until
the T2 event fires and cleans up the hang situation.
Add a check for hang_detected to hrtimer_force_reprogram() which
prevents the reprogramming of the hang delay in the hardware
timer. The subsequent hrtimer_interrupt will resolve all outstanding
issues.
[ tglx: Rewrote subject and changelog and fixed up the comment in
hrtimer_force_reprogram() ]
Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Link: http://lkml.kernel.org/r/53602DC6.2060101@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
When reading from trace_pipe, if tracing is off but nothing was read
it should block. If something is read and tracing is off, then EOF
is returned. If tracing is on and there's nothing to read, it will block.
But because the check of whether tracing is off and something was read
is done after the block on the pipe, it is hit or miss if the EOF is
returned or not leading to inconsistent behavior.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Calling rcu_bh_qs() after every softirq action is not really needed.
What RCU needs is at least one rcu_bh_qs() per softirq round to note a
quiescent state was passed for rcu_bh.
Note for Paul and myself : this could be inlined as a single instruction
and avoid smp_processor_id()
(sone this_cpu_write(rcu_bh_data.passed_quiesce, 1))
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
__this_cpu_ptr is being phased out.
One special case is increment_cpu_stall_ticks().
A per cpu variable is incremented so use raw_cpu_inc().
Cc: Dipankar Sarma <dipankar@in.ibm.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Currently, small systems move back into RCU_SYSIDLE_NOT from
RCU_SYSIDLE_SHORT and large systems do not. This works because moving
aggressively to RCU_SYSIDLE_NOT affects only performance, not correctness,
and on small systems, the performance impact should be negligible. That
said, this difference does make RCU a bit more complex, and RCU does not
seem to be suffering from any lack of complexity. This commit therefore
adjusts small-system operation to match that of large systems, so that
the state never moves back to RCU_SYSIDLE_NOT from RCU_SYSIDLE_SHORT.
Reported-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Currently, RCU binds the grace-period kthreads to the timekeeping
CPU only if CONFIG_NO_HZ_FULL_SYSIDLE=y. This means that these
kthreads must be bound manually when CONFIG_NO_HZ_FULL_SYSIDLE=n and
CONFIG_NO_HZ_FULL=y: Otherwise, these kthreads will induce OS jitter on
random CPUs. Given that we are trying to reduce the amount of manual
tweaking required to make CONFIG_NO_HZ_FULL=y work nicely, this commit
makes this binding happen when CONFIG_NO_HZ_FULL=y, even in cases where
CONFIG_NO_HZ_FULL_SYSIDLE=n.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This patch merges the function rcu_force_quiescent_state() with
rcu_sched_force_quiescent_state(), using the rcu_state pointer. Firstly,
the rcu_sched_force_quiescent_state() function is deleted from the file
kernel/rcu/tree.c. Also, the rcu_force_quiescent_state() function that was
calling force_quiescent_state with the argument rcu_preempt_state pointer
was deleted as well. The new function that combines the old ones uses
the rcu_state pointer and is located after rcu_batches_completed_bh()
in kernel/rcu/tree.c.
Signed-off-by: Andreea-Cristina Bernat <bernat.ada@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
kfree_call_rcu is defined two times. When defined under CONFIG_TREE_PREEMPT_RCU,
it uses rcu_preempt_state. Otherwise, it uses rcu_sched_state.
This patch uses the rcu_state_pointer to combine the two definitions into one.
The resulting function is placed after the closing of the preprocessor
conditional CONFIG_TREE_PREEMPT_RCU.
Signed-off-by: Andreea-Cristina Bernat <bernat.ada@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This patch replaces NR_CPUS with nr_cpu_ids as NR_CPUS should
consider cpumask_var_t.
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This patch adds event tracing to dyntick_save_progress_counter() in the case
where it returns 1. I used the tracepoint string "dti" because this function
returns 1 in case the CPU is in dynticks idle mode.
Signed-off-by: Andreea-Cristina Bernat <bernat.ada@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Some of the accesses to the rcu_state structure's ->jiffies_stall
field are unprotected. This patch protects them with ACCESS_ONCE().
The following coccinelle script was used to acheive this:
/* coccinelle script to protect uses of ->jiffies_stall with ACCESS_ONCE() */
@@
identifier a;
@@
(
ACCESS_ONCE(a->jiffies_stall)
|
- a->jiffies_stall
+ ACCESS_ONCE(a->jiffies_stall)
)
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The rcu_start_gp_advanced() function currently uses irq_work_queue()
to defer wakeups of the RCU grace-period kthread. This deferring
is necessary to avoid RCU-scheduler deadlocks involving the rcu_node
structure's lock, meaning that RCU cannot call any of the scheduler's
wake-up functions while holding one of these locks.
Unfortunately, the second and subsequent calls to irq_work_queue() are
ignored, and the first call will be ignored (aside from queuing the work
item) if the scheduler-clock tick is turned off. This is OK for many
uses, especially those where irq_work_queue() is called from an interrupt
or softirq handler, because in those cases the scheduler-clock-tick state
will be re-evaluated, which will turn the scheduler-clock tick back on.
On the next tick, any deferred work will then be processed.
However, this strategy does not always work for RCU, which can be invoked
at process level from idle CPUs. In this case, the tick might never
be turned back on, indefinitely defering a grace-period start request.
Note that the RCU CPU stall detector cannot see this condition, because
there is no RCU grace period in progress. Therefore, we can (and do!)
see long tens-of-seconds stalls in grace-period handling. In theory,
we could see a full grace-period hang, but rcutorture testing to date
has seen only the tens-of-seconds stalls. Event tracing demonstrates
that irq_work_queue() is being called repeatedly to no effect during
these stalls: The "newreq" event appears repeatedly from a task that is
not one of the grace-period kthreads.
In theory, irq_work_queue() might be fixed to avoid this sort of issue,
but RCU's requirements are unusual and it is quite straightforward to pass
wake-up responsibility up through RCU's call chain, so that the wakeup
happens when the offending locks are released.
This commit therefore makes this change. The rcu_start_gp_advanced(),
rcu_start_future_gp(), rcu_accelerate_cbs(), rcu_advance_cbs(),
__note_gp_changes(), and rcu_start_gp() functions now return a boolean
which indicates when a wake-up is needed. A new rcu_gp_kthread_wake()
does the wakeup when it is necessary and safe to do so: No self-wakes,
no wake-ups if the ->gp_flags field indicates there is no need (as in
someone else did the wake-up before we got around to it), and no wake-ups
before the grace-period kthread has been created.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Some of the uses of the rcu_state structure's ->jiffies_stall field
do not use ACCESS_ONCE(), despite there being unprotected accesses.
This commit therefore uses the ACCESS_ONCE() macro to protect this field.
Signed-off-by: Iulia Manda <iulia.manda21@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The ->preemptible field in rcu_data is only initialized in the function
rcu_init_percpu_data(), and never used. This commit therefore removes
this field.
Signed-off-by: Iulia Manda <iulia.manda21@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
In the old days, the only source of requests for future grace periods
was NOCB CPUs. This has changed: CPUs routinely post requests for
future grace periods in order to promote power efficiency and reduce
OS jitter with minimal impact on grace-period latency. This commit
therefore updates cpu_needs_another_gp() to invoke rcu_future_needs_gp()
instead of rcu_nocb_needs_gp(). The latter is no longer used, so is
now removed. This commit also adds tracing for the irq_work_queue()
wakeup case.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The print_other_cpu_stall() and print_cpu_stall() functions print
grace-period numbers using an unsigned format, which means that the number
one less than zero is a very large number. This commit therefore causes
these numbers to be printed with a signed format in order to improve
readability of the RCU CPU stall-warning output.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Liu Ping Fan <kernelfans@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
A number of ->gp_flags accesses don't have ACCESS_ONCE(), but all of
the can race against other loads or stores. This commit therefore
applies ACCESS_ONCE() to the unprotected ->gp_flags accesses.
Reported-by: Alexey Roytman <alexey.roytman@oracle.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
loading a module and enabling function tracing at the same time.
He uncovered a race where the module when loaded will convert the
calls to mcount into nops, and expects the module's text to be RW.
But when function tracing is enabled, it will convert all kernel
text (core and module) from RO to RW to convert the nops to calls
to ftrace to record the function. After the convertion, it will
convert all the text back from RW to RO.
The issue is, it will also convert the module's text that is loading.
If it converts it to RO before ftrace does its conversion, it will
cause ftrace to fail and require a reboot to fix it again.
This patch moves the ftrace module update that converts calls to mcount
into nops to be done when the module state is still MODULE_STATE_UNFORMED.
This will ignore the module when the text is being converted from
RW back to RO.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTXuHsAAoJEKQekfcNnQGuT7cIAJQhwX2fpdFr5eHwx0CyFo5c
75V0xcRhJsGeXqfgekkRhCHYEfL7v4sl6D+Bj8qzLG/0QresF9jVSMUTTZqYFpFc
t7f3oDDtdCmfofD/uyS7YOQ3JhU5ijo+Drzq8qRYtWNJJ0WCqbddpevcUiW1Zbvr
LAT3lcb+2I5Y1Jnyfd920+0plAnoeOw1/BPuRVJINwh8zeyvWnmp3iq9fOPdhMQQ
VhCCg+C2ILBPrCPFdwC5pVrL4a/CjyNd+LqtFXjLS9sO8s5KyUGkqKkbHMlhZeot
uRWlZUSNZsh/jpP4X2b+dtYGQ4Rrnp253a594Kmrzm/MPdsAV62oDqOfN0tzm7w=
=K59a
-----END PGP SIGNATURE-----
Merge tag 'trace-fixes-v3.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull ftrace bugfix from Steven Rostedt:
"Takao Indoh reported that he was able to cause a ftrace bug while
loading a module and enabling function tracing at the same time.
He uncovered a race where the module when loaded will convert the
calls to mcount into nops, and expects the module's text to be RW.
But when function tracing is enabled, it will convert all kernel text
(core and module) from RO to RW to convert the nops to calls to ftrace
to record the function. After the convertion, it will convert all the
text back from RW to RO.
The issue is, it will also convert the module's text that is loading.
If it converts it to RO before ftrace does its conversion, it will
cause ftrace to fail and require a reboot to fix it again.
This patch moves the ftrace module update that converts calls to
mcount into nops to be done when the module state is still
MODULE_STATE_UNFORMED. This will ignore the module when the text is
being converted from RW back to RO"
* tag 'trace-fixes-v3.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace/module: Hardcode ftrace_module_init() call into load_module()
A race exists between module loading and enabling of function tracer.
CPU 1 CPU 2
----- -----
load_module()
module->state = MODULE_STATE_COMING
register_ftrace_function()
mutex_lock(&ftrace_lock);
ftrace_startup()
update_ftrace_function();
ftrace_arch_code_modify_prepare()
set_all_module_text_rw();
<enables-ftrace>
ftrace_arch_code_modify_post_process()
set_all_module_text_ro();
[ here all module text is set to RO,
including the module that is
loading!! ]
blocking_notifier_call_chain(MODULE_STATE_COMING);
ftrace_init_module()
[ tries to modify code, but it's RO, and fails!
ftrace_bug() is called]
When this race happens, ftrace_bug() will produces a nasty warning and
all of the function tracing features will be disabled until reboot.
The simple solution is to treate module load the same way the core
kernel is treated at boot. To hardcode the ftrace function modification
of converting calls to mcount into nops. This is done in init/main.c
there's no reason it could not be done in load_module(). This gives
a better control of the changes and doesn't tie the state of the
module to its notifiers as much. Ftrace is special, it needs to be
treated as such.
The reason this would work, is that the ftrace_module_init() would be
called while the module is in MODULE_STATE_UNFORMED, which is ignored
by the set_all_module_text_ro() call.
Link: http://lkml.kernel.org/r/1395637826-3312-1-git-send-email-indou.takao@jp.fujitsu.com
Reported-by: Takao Indoh <indou.takao@jp.fujitsu.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: stable@vger.kernel.org # 2.6.38+
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
do_div() needs 'u64' type, or it reports warning. And negative number
is meaningless for "speed", so change all signed to unsigned within
swsusp_show_speed().
The related warning (with allmodconfig for unicore32):
CC kernel/power/hibernate.o
kernel/power/hibernate.c: In function ‘swsusp_show_speed’:
kernel/power/hibernate.c:237: warning: comparison of distinct pointer types lacks a cast
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
[rjw: Subject]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On x86 the allocation of irq descriptors may allocate interrupts which
are in the range of the GSI interrupts. That's wrong as those
interrupts are hardwired and we don't have the irq domain translation
like PPC. So one of these interrupts can be hooked up later to one of
the devices which are hard wired to it and the io_apic init code for
that particular interrupt line happily reuses that descriptor with a
completely different configuration so hell breaks lose.
Inside x86 we allocate dynamic interrupts from above nr_gsi_irqs,
except for a few usage sites which have not yet blown up in our face
for whatever reason. But for drivers which need an irq range, like the
GPIO drivers, we have no limit in place and we don't want to expose
such a detail to a driver.
To cure this introduce a function which an architecture can implement
to impose a lower bound on the dynamic interrupt allocations.
Implement it for x86 and set the lower bound to nr_gsi_irqs, which is
the end of the hardwired interrupt space, so all dynamic allocations
happen above.
That not only allows the GPIO driver to work sanely, it also protects
the bogus callsites of create_irq_nr() in hpet, uv, irq_remapping and
htirq code. They need to be cleaned up as well, but that's a separate
issue.
Reported-by: Jin Yao <yao.jin@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Krogerus Heikki <heikki.krogerus@intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1404241617360.28206@ionos.tec.linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The kernel passes any args it doesn't need through to init, except it
assumes anything containing '.' belongs to the kernel (for a module).
This change means all users can clearly distinguish which arguments
are for init.
For example, the kernel uses debug ("dee-bug") to mean log everything to
the console, where systemd uses the debug from the Scandinavian "day-boog"
meaning "fail to boot". If a future versions uses argv[] instead of
reading /proc/cmdline, this confusion will be avoided.
eg: test 'FOO="this is --foo"' -- 'systemd.debug="true true true"'
Gives:
argv[0] = '/debug-init'
argv[1] = 'test'
argv[2] = 'systemd.debug=true true true'
envp[0] = 'HOME=/'
envp[1] = 'TERM=linux'
envp[2] = 'FOO=this is --foo'
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We remove the waiting module removal in commit 3f2b9c9cdf (September
2013), but it turns out that modprobe in kmod (< version 16) was
asking for waiting module removal. No one noticed since modprobe would
check for 0 usage immediately before trying to remove the module, and
the race is unlikely.
However, it means that anyone running old (but not ancient) kmod
versions is hitting the printk designed to see if anyone was running
"rmmod -w". All reports so far have been false positives, so remove
the warning.
Fixes: 3f2b9c9cdf
Reported-by: Valerio Vanni <valerio.vanni@inwind.it>
Cc: Elliott, Robert (Server Storage) <Elliott@hp.com>
Cc: stable@kernel.org
Acked-by: Lucas De Marchi <lucas.de.marchi@gmail.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Pull irq fixes from Thomas Gleixner:
"A slighlty large fix for a subtle issue in the CPU hotplug code of
certain ARM SoCs, where the not yet online cpu needs to setup the cpu
local timer and needs to set the interrupt affinity to itself.
Setting interrupt affinity to a not online cpu is prohibited and
therefor the timer interrupt ends up on the wrong cpu, which leads to
nasty complications.
The SoC folks tried to hack around that in the SoC code in some more
than nasty ways. The proper solution is to have a way to enforce the
affinity setting to a not online cpu. The core patch to the genirq
code provides that facility and the follow up patches make use of it
in the GIC interrupt controller and the exynos timer driver.
The change to the core code has no implications to existing users,
except for the rename of the locked function and therefor the
necessary fixup in mips/cavium. Aside of that, no runtime impact is
possible, as none of the existing interrupt chips implements anything
which depends on the force argument of the irq_set_affinity()
callback"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource: Exynos_mct: Register clock event after request_irq()
clocksource: Exynos_mct: Use irq_force_affinity() in cpu bringup
irqchip: Gic: Support forced affinity setting
genirq: Allow forcing cpu affinity of interrupts
Use pr_fmt and remove embedded prefixes.
Realign modified multi-line statements to open parenthesis.
Convert embedded function name to "%s: ", __func__
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
As suggested by scripts/checkpatch.pl, substitude all pr_warning()
with pr_warn().
No functional change.
Signed-off-by: Jianyu Zhan <nasa4836@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
6612f05b88 ("cgroup: unify pidlist and other file handling")
has removed the only user of cgroup_pidlist_seq_operations :
cgroup_pidlist_open().
This patch removes it.
Signed-off-by: Jianyu Zhan <nasa4836@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
1d5be6b287 ("cgroup: move module ref handling into
rebind_subsystems()") makes parse_cgroupfs_options() no longer takes
refcounts on subsystems.
And unified hierachy makes parse_cgroupfs_options not need to call
with cgroup_mutex held to protect the cgroup_subsys[].
So this patch removes BUG_ON() and the comment. As the comment
doesn't contain useful information afterwards, the whole comment is
removed.
Signed-off-by: Jianyu Zhan <nasa4836@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
cgroup users often need a way to determine when a cgroup's
subhierarchy becomes empty so that it can be cleaned up. cgroup
currently provides release_agent for it; unfortunately, this mechanism
is riddled with issues.
* It delivers events by forking and execing a userland binary
specified as the release_agent. This is a long deprecated method of
notification delivery. It's extremely heavy, slow and cumbersome to
integrate with larger infrastructure.
* There is single monitoring point at the root. There's no way to
delegate management of a subtree.
* The event isn't recursive. It triggers when a cgroup doesn't have
any tasks or child cgroups. Events for internal nodes trigger only
after all children are removed. This again makes it impossible to
delegate management of a subtree.
* Events are filtered from the kernel side. "notify_on_release" file
is used to subscribe to or suppress release event. This is
unnecessarily complicated and probably done this way because event
delivery itself was expensive.
This patch implements interface file "cgroup.populated" which can be
used to monitor whether the cgroup's subhierarchy has tasks in it or
not. Its value is 0 if there is no task in the cgroup and its
descendants; otherwise, 1, and kernfs_notify() notificaiton is
triggers when the value changes, which can be monitored through poll
and [di]notify.
This is a lot ligther and simpler and trivially allows delegating
management of subhierarchy - subhierarchy monitoring can block further
propgation simply by putting itself or another process in the root of
the subhierarchy and monitor events that it's interested in from there
without interfering with monitoring higher in the tree.
v2: Patch description updated as per Serge.
v3: "cgroup.subtree_populated" renamed to "cgroup.populated". The
subtree_ prefix was a bit confusing because
"cgroup.subtree_control" uses it to denote the tree rooted at the
cgroup sans the cgroup itself while the populated state includes
the cgroup itself.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Lennart Poettering <lennart@poettering.net>
Pull in driver-core-next to receive kernfs_notify() updates which will
be used by the planned "cgroup.populated" implementation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Support for uevent_helper, aka hotplug, is not required on many systems
these days but it can still be enabled via sysfs or sysctl.
Reported-by: Darren Shepherd <darren.s.shepherd@gmail.com>
Signed-off-by: Michael Marineau <mike@marineau.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is possible by passing a netlink socket to a more privileged
executable and then to fool that executable into writing to the socket
data that happens to be valid netlink message to do something that
privileged executable did not intend to do.
To keep this from happening replace bare capable and ns_capable calls
with netlink_capable, netlink_net_calls and netlink_ns_capable calls.
Which act the same as the previous calls except they verify that the
opener of the socket had the desired permissions as well.
Reported-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The functions ftrace_set_global_filter() and ftrace_set_global_notrace()
still have their old names in the kernel doc (ftrace_set_filter and
ftrace_set_notrace respectively). Replace these with the real names.
Link: http://lkml.kernel.org/p/1398006644-5935-3-git-send-email-wangjiaxing@insigma.com.cn
Signed-off-by: Jiaxing Wang <wangjiaxing@insigma.com.cn>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When using ftrace_ops_list_func, we should skip 4 instead of 3,
to avoid ftrace_call+0x5/0xb appearing in the stack trace:
Depth Size Location (110 entries)
----- ---- --------
0) 2956 0 update_curr+0xe/0x1e0
1) 2956 68 ftrace_call+0x5/0xb
2) 2888 92 enqueue_entity+0x53/0xe80
3) 2796 80 enqueue_task_fair+0x47/0x7e0
4) 2716 28 enqueue_task+0x45/0x70
5) 2688 12 activate_task+0x22/0x30
Add a function using_ftrace_ops_list_func() to test for this while keeping
ftrace_ops_list_func to remain static.
Link: http://lkml.kernel.org/p/1398006644-5935-2-git-send-email-wangjiaxing@insigma.com.cn
Signed-off-by: Jiaxing Wang <wangjiaxing@insigma.com.cn>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Show blacklist entries (function names with the address
range) via /sys/kernel/debug/kprobes/blacklist.
Note that at this point the blacklist supports only
in vmlinux, not module. So the list is fixed and
not updated.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Link: http://lkml.kernel.org/r/20140417081849.26341.11609.stgit@ltc230.yrl.intra.hitachi.co.jp
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use NOKPROBE_SYMBOL macro to protect functions from
kprobes instead of __kprobes annotation in sched/core.c.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/20140417081842.26341.83959.stgit@ltc230.yrl.intra.hitachi.co.jp
Use NOKPROBE_SYMBOL macro to protect functions from
kprobes instead of __kprobes annotation in notifier.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20140417081835.26341.56128.stgit@ltc230.yrl.intra.hitachi.co.jp
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use NOKPROBE_SYMBOL macro to protect functions from
kprobes instead of __kprobes annotation in ftrace.
This applies nokprobe_inline annotation for some cases,
because NOKPROBE_SYMBOL() will inhibit inlining by
referring the symbol address.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20140417081828.26341.55152.stgit@ltc230.yrl.intra.hitachi.co.jp
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use NOKPROBE_SYMBOL macro to protect functions from
kprobes instead of __kprobes annotation.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Link: http://lkml.kernel.org/r/20140417081821.26341.40362.stgit@ltc230.yrl.intra.hitachi.co.jp
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There is no need to prohibit probing on the functions
used for preparation and uprobe only fetch functions.
Those are safely probed because those are not invoked
from kprobe's breakpoint/fault/debug handlers. So there
is no chance to cause recursive exceptions.
Following functions are now removed from the kprobes blacklist:
update_bitfield_fetch_param
free_bitfield_fetch_param
kprobe_register
FETCH_FUNC_NAME(stack, type) in trace_uprobe.c
FETCH_FUNC_NAME(memory, type) in trace_uprobe.c
FETCH_FUNC_NAME(memory, string) in trace_uprobe.c
FETCH_FUNC_NAME(memory, string_size) in trace_uprobe.c
FETCH_FUNC_NAME(file_offset, type) in trace_uprobe.c
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20140417081800.26341.56504.stgit@ltc230.yrl.intra.hitachi.co.jp
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There is no need to prohibit probing on the functions
used for preparation, registeration, optimization,
controll etc. Those are safely probed because those are
not invoked from breakpoint/fault/debug handlers,
there is no chance to cause recursive exceptions.
Following functions are now removed from the kprobes blacklist:
add_new_kprobe
aggr_kprobe_disabled
alloc_aggr_kprobe
alloc_aggr_kprobe
arm_all_kprobes
__arm_kprobe
arm_kprobe
arm_kprobe_ftrace
check_kprobe_address_safe
collect_garbage_slots
collect_garbage_slots
collect_one_slot
debugfs_kprobe_init
__disable_kprobe
disable_kprobe
disarm_all_kprobes
__disarm_kprobe
disarm_kprobe
disarm_kprobe_ftrace
do_free_cleaned_kprobes
do_optimize_kprobes
do_unoptimize_kprobes
enable_kprobe
force_unoptimize_kprobe
free_aggr_kprobe
free_aggr_kprobe
__free_insn_slot
__get_insn_slot
get_optimized_kprobe
__get_valid_kprobe
init_aggr_kprobe
init_aggr_kprobe
in_nokprobe_functions
kick_kprobe_optimizer
kill_kprobe
kill_optimized_kprobe
kprobe_addr
kprobe_optimizer
kprobe_queued
kprobe_seq_next
kprobe_seq_start
kprobe_seq_stop
kprobes_module_callback
kprobes_open
optimize_all_kprobes
optimize_kprobe
prepare_kprobe
prepare_optimized_kprobe
register_aggr_kprobe
register_jprobe
register_jprobes
register_kprobe
register_kprobes
register_kretprobe
register_kretprobe
register_kretprobes
register_kretprobes
report_probe
show_kprobe_addr
try_to_optimize_kprobe
unoptimize_all_kprobes
unoptimize_kprobe
unregister_jprobe
unregister_jprobes
unregister_kprobe
__unregister_kprobe_bottom
unregister_kprobes
__unregister_kprobe_top
unregister_kretprobe
unregister_kretprobe
unregister_kretprobes
unregister_kretprobes
wait_for_kprobe_optimizer
I tested those functions by putting kprobes on all
instructions in the functions with the bash script
I sent to LKML. See:
https://lkml.org/lkml/2014/3/27/33
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: fche@redhat.com
Cc: systemtap@sourceware.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Introduce NOKPROBE_SYMBOL() macro which builds a kprobes
blacklist at kernel build time.
The usage of this macro is similar to EXPORT_SYMBOL(),
placed after the function definition:
NOKPROBE_SYMBOL(function);
Since this macro will inhibit inlining of static/inline
functions, this patch also introduces a nokprobe_inline macro
for static/inline functions. In this case, we must use
NOKPROBE_SYMBOL() for the inline function caller.
When CONFIG_KPROBES=y, the macro stores the given function
address in the "_kprobe_blacklist" section.
Since the data structures are not fully initialized by the
macro (because there is no "size" information), those
are re-initialized at boot time by using kallsyms.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Link: http://lkml.kernel.org/r/20140417081705.26341.96719.stgit@ltc230.yrl.intra.hitachi.co.jp
Cc: Alok Kataria <akataria@vmware.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christopher Li <sparse@chrisli.org>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jan-Simon Möller <dl9pf@gmx.de>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: linux-arch@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-sparse@vger.kernel.org
Cc: virtualization@lists.linux-foundation.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
.entry.text is a code area which is used for interrupt/syscall
entries, which includes many sensitive code.
Thus, it is better to prohibit probing on all of such code
instead of a part of that.
Since some symbols are already registered on kprobe blacklist,
this also removes them from the blacklist.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Jonathan Lebon <jlebon@redhat.com>
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Link: http://lkml.kernel.org/r/20140417081658.26341.57354.stgit@ltc230.yrl.intra.hitachi.co.jp
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When 'flags' argument to sched_{set,get}attr() syscalls were
added in:
6d35ab4809 ("sched: Add 'flags' argument to sched_{set,get}attr() syscalls")
no description for 'flags' was added. It causes the following warnings on "make htmldocs":
Warning(/kernel/sched/core.c:3645): No description found for parameter 'flags'
Warning(/kernel/sched/core.c:3789): No description found for parameter 'flags'
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Cc: peterz@infradead.org
Link: http://lkml.kernel.org/r/1397753955-2914-1-git-send-email-standby24x7@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
cgroup is switching away from multiple hierarchies and will use one
unified default hierarchy where controllers can be dynamically enabled
and disabled per subtree. The default hierarchy will serve as the
unified hierarchy to which all controllers are attached and a css on
the default hierarchy would need to also serve the tasks of descendant
cgroups which don't have the controller enabled - ie. the tree may be
collapsed from leaf towards root when viewed from specific
controllers. This has been implemented through effective css in the
previous patches.
This patch finally implements dynamic subtree controller
enable/disable on the default hierarchy via a new knob -
"cgroup.subtree_control" which controls which controllers are enabled
on the child cgroups. Let's assume a hierarchy like the following.
root - A - B - C
\ D
root's "cgroup.subtree_control" determines which controllers are
enabled on A. A's on B. B's on C and D. This coincides with the
fact that controllers on the immediate sub-level are used to
distribute the resources of the parent. In fact, it's natural to
assume that resource control knobs of a child belong to its parent.
Enabling a controller in "cgroup.subtree_control" declares that
distribution of the respective resources of the cgroup will be
controlled. Note that this means that controller enable states are
shared among siblings.
The default hierarchy has an extra restriction - only cgroups which
don't contain any task may have controllers enabled in
"cgroup.subtree_control". Combined with the other properties of the
default hierarchy, this guarantees that, from the view point of
controllers, tasks are only on the leaf cgroups. In other words, only
leaf csses may contain tasks. This rules out situations where child
cgroups compete against internal tasks of the parent, which is a
competition between two different types of entities without any clear
way to determine resource distribution between the two. Different
controllers handle it differently and all the implemented behaviors
are ambiguous, ad-hoc, cumbersome and/or just wrong. Having this
structural constraints imposed from cgroup core removes the burden
from controller implementations and enables showing one consistent
behavior across all controllers.
When a controller is enabled or disabled, css associations for the
controller in the subtrees of each child should be updated. After
enabling, the whole subtree of a child should point to the new css of
the child. After disabling, the whole subtree of a child should point
to the cgroup's css. This is implemented by first updating cgroup
states such that cgroup_e_css() result points to the appropriate css
and then invoking cgroup_update_dfl_csses() which migrates all tasks
in the affected subtrees to the self cgroup on the default hierarchy.
* When read, "cgroup.subtree_control" lists all the currently enabled
controllers on the children of the cgroup.
* White-space separated list of controller names prefixed with either
'+' or '-' can be written to "cgroup.subtree_control". The ones
prefixed with '+' are enabled on the controller and '-' disabled.
* A controller can be enabled iff the parent's
"cgroup.subtree_control" enables it and disabled iff no child's
"cgroup.subtree_control" has it enabled.
* If a cgroup has tasks, no controller can be enabled via
"cgroup.subtree_control". Likewise, if "cgroup.subtree_control" has
some controllers enabled, tasks can't be migrated into the cgroup.
* All controllers which aren't bound on other hierarchies are
automatically associated with the root cgroup of the default
hierarchy. All the controllers which are bound to the default
hierarchy are listed in the read-only file "cgroup.controllers" in
the root directory.
* "cgroup.controllers" in all non-root cgroups is read-only file whose
content is equal to that of "cgroup.subtree_control" of the parent.
This indicates which controllers can be used in the cgroup's
"cgroup.subtree_control".
This is still experimental and there are some holes, one of which is
that ->can_attach() failure during cgroup_update_dfl_csses() may leave
the cgroups in an undefined state. The issues will be addressed by
future patches.
v2: Non-root cgroups now also have "cgroup.controllers".
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Unified hierarchy implementation would require re-migrating tasks onto
the same cgroup on the default hierarchy to reflect updated effective
csses. Update cgroup_migrate_prepare_dst() so that it accepts NULL as
the destination cgrp. When NULL is specified, the destination is
considered to be the cgroup on the default hierarchy associated with
each css_set.
After this change, the identity check in cgroup_migrate_add_src()
isn't sufficient for noop detection as the associated csses may change
without any cgroup association changing. The only way to tell whether
a migration is noop or not is testing whether the source and
destination csets are identical. The noop check in
cgroup_migrate_add_src() is removed and cset identity test is added to
cgroup_migreate_prepare_dst(). If it's detected that source and
destination csets are identical, the cset is removed removed from
@preloaded_csets and all the migration nodes are cleared which makes
cgroup_migrate() ignore the cset.
Also, make the function append the destination css_sets to
@preloaded_list so that destination css_sets always come after source
css_sets.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Because the default root couldn't have any non-root csses attached to
it, rebinding away from it was always allowed; however, the default
hierarchy will soon host the unified hierarchy and have non-root csses
so the rebind restrictions need to be updated accordingly.
Instead of special casing rebinding from the default hierarchy and
then checking whether the source hierarchy has children cgroups, which
implies non-root csses for !dfl hierarchies, simply check whether the
source hierarchy has non-root csses for the subsystem using
css_next_child().
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
To implement the unified hierarchy behavior, we'll need to be able to
determine the associated cgroup on the default hierarchy from css_set.
Let's add css_set->dfl_cgrp so that it can be accessed conveniently
and efficiently.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Now that effective css handling has been added and iterators updated
accordingly, it's safe to allow cgroup creation in the default
hierarchy. Unblock cgroup creation in the default hierarchy.
As the default hierarchy will implement explicit enabling and
disabling of controllers on each cgroup, suppress automatic css
enabling on cgroup creation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
After a css finishes offlining, offline_css() mistakenly performs
RCU_INIT_POINTER(css->cgroup->subsys[ss->id], css) which just sets the
cgroup->subsys[] pointer to the current value. The intention was to
clear it after offline is complete, not reassign the same value.
Update it to assign NULL instead of the current value. This makes
cgroup_css() to return NULL once offline is complete. All the
existing users of the function either can handle NULL return already
or guarantee that the css doesn't get offlined.
While this is a bugfix, as css lifetime is currently tied to the
cgroup it belongs to, this bug doesn't cause any actual problems.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Currently, css_task_iter iterates tasks associated with a css by
visiting each css_set associated with the owning cgroup and walking
tasks of each of them. This works fine for !unified hierarchies as
each cgroup has its own css for each associated subsystem on the
hierarchy; however, on the planned unified hierarchy, a cgroup may not
have csses associated and its tasks would be considered associated
with the matching css of the nearest ancestor which has the subsystem
enabled.
This means that on the default unified hierarchy, just walking all
tasks associated with a cgroup isn't enough to walk all tasks which
are associated with the specified css. If any of its children doesn't
have the matching css enabled, task iteration should also include all
tasks from the subtree. We already added cgroup->e_csets[] to list
all css_sets effectively associated with a given css and walk css_sets
on that list instead to achieve such iteration.
This patch updates css_task_iter iteration such that it walks css_sets
on cgroup->e_csets[] instead of cgroup->cset_links if iteration is
requested on an non-dummy css. Thanks to the previous iteration
update, this change can be achieved with the addition of
css_task_iter->ss and minimal updates to css_advance_task_iter() and
css_task_iter_start().
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
This patch reorganizes css_task_iter so that adding effective css
support is easier.
* s/->cset_link/->cset_pos/ and s/->task/->task_pos/ for consistency
* ->origin_css is used to determine whether the iteration reached the
last css_set. Replace it with explicit ->cset_head so that
css_advance_task_iter() doesn't have to know the termination
condition directly.
* css_task_iter_next() currently assumes that it's walking list of
cgrp_cset_link and reaches into the current cset through the current
link to determine the termination conditions for task walking. As
this won't always be true for effective css walking, add
->tasks_head and ->mg_tasks_head and use them to control task
walking so that css_task_iter_next() doesn't have to know how
css_sets are being walked.
This patch doesn't make any behavior changes. The iteration logic
stays unchanged after the patch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
css_next_child() walks the children of the specified css. It does
this by finding the next cgroup and then returning the requested css.
On the default unified hierarchy, a cgroup may not have a css
associated with it even if the hierarchy has the subsystem enabled.
This patch updates css_next_child() so that it skips children without
the requested css associated.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
On the default unified hierarchy, a cgroup may be associated with
csses of its ancestors, which means that a css of a given cgroup may
be associated with css_sets of descendant cgroups. This means that we
can't walk all tasks associated with a css by iterating the css_sets
associated with the cgroup as there are css_sets which are pointing to
the css but linked on the descendants.
This patch adds per-subsystem list heads cgroup->e_csets[]. Any
css_set which is pointing to a css is linked to
css->cgroup->e_csets[$SUBSYS_ID] through
css_set->e_cset_node[$SUBSYS_ID]. The lists are protected by
css_set_rwsem and will allow us to walk all css_sets associated with a
given css so that we can find out all associated tasks.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
In the planned default unified hierarchy, controllers may get
dynamically attached to and detached from a cgroup and a cgroup may
not have csses for all the controllers associated with the hierarchy.
When a cgroup doesn't have its own css for a given controller, the css
of the nearest ancestor with the controller enabled will be used,
which is called the effective css. This patch introduces
cgroup_e_css() and for_each_e_css() to access the effective csses and
convert compare_css_sets(), find_existing_css_set() and
cgroup_migrate() to use the effective csses so that they can handle
cgroups with partial csses correctly.
This means that for two css_sets to be considered identical, they
should have both matching csses and cgroups. compare_css_sets()
already compares both, not for correctness but for optimization. As
this now becomes a matter of correctness, update the comments
accordingly.
For all !default hierarchies, cgroup_e_css() always equals
cgroup_css(), so this patch doesn't change behavior.
While at it, fix incorrect locking comment for for_each_css().
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
944196278d ("cgroup: move ->subsys_mask from cgroupfs_root to
cgroup") moved ->subsys_mask from cgroup_root to cgroup to prepare for
the unified hierarhcy; however, it turns out that carrying the
subsys_mask of the children in the parent, instead of itself, is a lot
more natural. This patch restores cgroup_root->subsys_mask and morphs
cgroup->subsys_mask into cgroup->child_subsys_mask.
* Uses of root->cgrp.subsys_mask are restored to root->subsys_mask.
* Remove automatic setting and clearing of cgrp->subsys_mask and
instead just inherit ->child_subsys_mask from the parent during
cgroup creation. Note that this doesn't affect any current
behaviors.
* Undo __kill_css() separation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Ingo Molnar