Commit Graph

22 Commits

Author SHA1 Message Date
Robert P. J. Day 59fb1b9f5d ipmi: remove superfluous kernel/userspace explanation
Given the obvious distinction between kernel and userspace supported
by uapi/, it seems unnecessary to comment on that.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 19:10:21 -08:00
David Howells 607ca46e97 UAPI: (Scripted) Disintegrate include/linux
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>
2012-10-13 10:46:48 +01:00
Paul Gortmaker 313162d0b8 device.h: audit and cleanup users in main include dir
The <linux/device.h> header includes a lot of stuff, and
it in turn gets a lot of use just for the basic "struct device"
which appears so often.

Clean up the users as follows:

1) For those headers only needing "struct device" as a pointer
in fcn args, replace the include with exactly that.

2) For headers not really using anything from device.h, simply
delete the include altogether.

3) For headers relying on getting device.h implicitly before
being included themselves, now explicitly include device.h

4) For files in which doing #1 or #2 uncovers an implicit
dependency on some other header, fix by explicitly adding
the required header(s).

Any C files that were implicitly relying on device.h to be
present have already been dealt with in advance.

Total removals from #1 and #2: 51.  Total additions coming
from #3: 9.  Total other implicit dependencies from #4: 7.

As of 3.3-rc1, there were 110, so a net removal of 42 gives
about a 38% reduction in device.h presence in include/*

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-03-16 10:38:24 -04:00
Paul Gortmaker de47725421 include: replace linux/module.h with "struct module" wherever possible
The <linux/module.h> pretty much brings in the kitchen sink along
with it, so it should be avoided wherever reasonably possible in
terms of being included from other commonly used <linux/something.h>
files, as it results in a measureable increase on compile times.

The worst culprit was probably device.h since it is used everywhere.
This file also had an implicit dependency/usage of mutex.h which was
masked by module.h, and is also fixed here at the same time.

There are over a dozen other headers that simply declare the
struct instead of pulling in the whole file, so follow their lead
and simply make it a few more.

Most of the implicit dependencies on module.h being present by
these headers pulling it in have been now weeded out, so we can
finally make this change with hopefully minimal breakage.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:32:32 -04:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Zhao Yakui 16f4232ce4 IPMI: Add one interface to get more info of low-level IPMI device
The IPMI smi_watcher will be used to catch the IPMI interface as they
come or go.  In order to communicate with the correct IPMI device, it
should be confirmed whether it is what we wanted especially on the
system with multiple IPMI devices. But the new_smi callback function
of smi_watcher provides very limited info(only the interface number
and dev pointer) and there is no detailed info about the low level
interface. For example: which mechansim registers the IPMI
interface(ACPI, PCI, DMI and so on).

This is to add one interface that can get more info of low-level IPMI
device. For example: the ACPI device handle will be returned for the
pnp_acpi IPMI device.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-12-14 00:21:51 -05:00
dann frazier 4dec302ff7 ipmi: add oem message handling
Enable userspace to receive messages that a BMC transmits using an OEM
medium.  This is used by the HP iLO2.

Based on code originally written by Patrick Schoeller.

Signed-off-by: dann frazier <dannf@hp.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-21 13:41:48 -07:00
Robert P. J. Day 66ec2d7786 ipmi: make comment match actual preprocessor check
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:15 -07:00
Corey Minyard c70d749986 ipmi: style fixes in the base code
Lots of style fixes for the base IPMI driver.  No functional changes.
Basically fixes everything reported by checkpatch and fixes the comment
style.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:15 -07:00
Corey Minyard bda4c30aa6 ipmi: run to completion fixes
The "run_to_completion" mode was somewhat broken.  Locks need to be avoided in
run_to_completion mode, and it shouldn't be used by normal users, just
internally for panic situations.

This patch removes locks in run_to_completion mode and removes the user call
for setting the mode.  The only user was the poweroff code, but it was easily
converted to use the polling interface.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:14 -07:00
Corey Minyard fcfa472411 IPMI: add polled interface
Currently the IPMI watchdog timer sets the watchdog timeout on a panic, but it
doesn't actually poll the interface to make sure the message goes out.

Add an interface for polling the IPMI driver, and add code to the IPMI
watchdog timer to poll the interface when the timer is set from a panic.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 14:37:32 -07:00
Corey Minyard b9675136e2 [PATCH] IPMI: Add maintenance mode
Some commands and operations on a BMC can cause the BMC to "go away" for a
while.  This can cause the automatic flag processing and other things of that
nature to timeout and generate annoying logs, or possibly cause other bad
things to happen when in firmware update mode.

Add detection of those commands (cold reset, warm reset, and any firmware
command) and turns off automatic processing for 30 seconds.  It also add a
manual override either way.

Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:47 -08:00
Corey Minyard c69c31270c [PATCH] IPMI: per-channel command registration
This patch adds the ability to register for a command per-channel in the
IPMI driver.

If your BMC supports multiple channels, incoming messages can be useful to
have the ability to register to receive commands on a specific channel
instead the current behaviour of all channels.

Signed-off-by: David Barksdale <amatus@ocgnet.org>
Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01 00:39:23 -07:00
Adrian Bunk 456229a91d [PATCH] drivers/char/ipmi/ipmi_msghandler.c: make proc_ipmi_root static
Make struct proc_ipmi_root static.

Besides this, tremove removes an unused #ifdef CONFIG_PROC_FS from
include/linux/ipmi.h.

Acked-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27 17:32:48 -07:00
David Woodhouse 2e0e1f9f1c Don't include <linux/device.h> from user-visible part of linux/ipmi.h
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-04-25 14:15:44 +01:00
Corey Minyard 50c812b2b9 [PATCH] ipmi: add full sysfs support
Add full driver model support for the IPMI driver.  It links in the proper
bus and device support.

It adds an "ipmi" driver interface that has each BMC discovered by the
driver (as a device).  These BMCs appear in the devices/platform directory.
 If there are multiple interfaces to the same BMC, the driver should
discover this and will only have one BMC entry.  The BMC entry will have
pointers to each interface device that connects to it.

The device information (statistics and config information) has not yet been
ported over to the driver model from proc, that will come later.

This work was based on work by Yani Ioannou.  I basically rewrote it using
that code as a guide, but he still deserves credit :).

[bunk@stusta.de: make ipmi_find_bmc_guid() static]
Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Yani Ioannou <yani.ioannou@gmail.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26 08:56:56 -08:00
Corey Minyard 393d2cc354 [PATCH] ipmi: use refcount in message handler
This patch is rather large, but it really can't be done in smaller chunks
easily and I believe it is an important change.  This has been out and tested
for a while in the latest IPMI driver release.  There are no functional
changes, just changes as necessary to convert the locking over (and a few
minor style updates).

The IPMI driver uses read/write locks to ensure that things exist while they
are in use.  This is bad from a number of points of view.  This patch removes
the rwlocks and uses refcounts and RCU lists to manage what the locks did.

Signed-off-by: Corey Minyard <minyard@acm.org>
Cc: Matt Domsch <Matt_Domsch@dell.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:43 -08:00
Corey Minyard 56a55ec648 [PATCH] ipmi: fix panic ipmb response
The "null message handler" in the IPMI driver is used in startup and panic
situations to handle messages.  It was only designed to work with messages
from the local management controller, but in some cases it was used to get
messages from remote managmenet controllers, and the system would then
panic.  This patch makes the "null message handler" in the IPMI driver more
general so it works with any kind of message.

Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:48 -07:00
Corey Minyard 07766f241b [PATCH] ipmi: allow userland to include ipmi.h
The IPMI driver include file needs to include compiler.h so it has definitions
for __user and such.

Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:48 -07:00
Corey Minyard c14979b993 [PATCH] ipmi: add per-channel IPMB addresses
IPMI allows multiple IPMB channels on a single interface, and each channel
might have a different IPMB address.  However, the driver has only one IPMB
address that it uses for everything.  This patch adds new IOCTLS and a new
internal interface for setting per-channel IPMB addresses and LUNs.  New
systems are coming out with support for multiple IPMB channels, and they are
broken without this patch.

Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:47 -07:00
Corey Minyard 3b6259432d [PATCH] ipmi: add power cycle capability
This patch to adds "power cycle" functionality to the IPMI power off module
ipmi_poweroff.  It also contains changes to support procfs control of the
feature.

The power cycle action is considered an optional chassis control in the IPMI
specification.  However, it is definitely useful when the hardware supports
it.  A power cycle is usually required in order to reset a firmware in a bad
state.  This action is critical to allow remote management of servers.

The implementation adds power cycle as optional to the ipmi_poweroff module.
It can be modified dynamically through the proc entry mentioned above.  During
a power down and enabled, the power cycle command is sent to the BMC firmware.
 If it fails either due to non-support or some error, it will retry to send
the command as power off.

Signed-off-by: Christopher A. Poblete <Chris_Poblete@dell.com>
Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 00:05:23 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00