Commit Graph

24 Commits

Author SHA1 Message Date
David Vrabel e43ace8912 uwb: use print_hex_dump()
Use print_hex_dump() instead of the home-grown dump_bytes().

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-12-22 18:27:17 +00:00
David Vrabel bce83697c5 uwb: use dev_dbg() for debug messages
Instead of the home-grown d_fnstart(), d_fnend() and d_printf() macros,
use dev_dbg() or remove the message entirely.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-12-22 18:22:50 +00:00
David Vrabel fe6e87a4b5 wusb: fix oops when terminating a non-existant reservation
If a reservation was not established, do not try terminating it.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-12-12 13:25:21 +00:00
Stefano Panella 5b37717a23 uwb: improved MAS allocator and reservation conflict handling
Greatly enhance the MAS allocator:
  - Handle row and column reservations.
  - Permit all the available MAS to be allocated.
  - Follows the WiMedia rules on MAS selection.

Take appropriate action when reservation conflicts are detected.
  - Correctly identify which reservation wins the conflict.
  - Protect alien BP reservations.
  - If an owned reservation loses, resize/move it.
  - Follow the backoff procedure before requesting additional MAS.

When reservations are terminated, move the remaining reservations (if
necessary) so they keep following the MAS allocation rules.

Signed-off-by: Stefano Panella <stefano.panella@csr.com>
Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-12-12 13:00:06 +00:00
David Vrabel 56968d0c1a wusb: whci-hcd shouldn't do ASL/PZL updates while channel is inactive
ASL/PZL updates while the WUSB channel is inactive (i.e., the PZL and
ASL are stopped) may not complete.  This causes hangs when removing the
whci-hcd module if a device is still connected (removing the device
does an endpoint_disable which results in an ASL update to remove the
qset).

If the WUSB channel is inactive the update can simply be skipped as the
WHC doesn't care about the state of the ASL/PZL.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-11-25 14:23:40 +00:00
David Vrabel 6fae35f9ce uwb: add basic radio manager
The UWB radio manager coordinates the use of the radio between the
PALs that may be using it.  PALs request use of the radio with
uwb_radio_start() and the radio manager will start beaconing if its
not already doing so.  When the last PAL has called uwb_radio_stop()
beaconing will be stopped.

In the future, the radio manager will have a more sophisticated channel
selection algorithm, probably following the Channel Selection Policy
from the WiMedia Alliance when it is finalized.  For now, channel 9
(BG1, TFC1) is selected.

The user may override the channel selected by the radio manager and may
force the radio to stop beaconing.

The WUSB Host Controller PAL makes use of this and there are two new
debug PAL commands that can be used for testing.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-11-19 14:46:33 +00:00
Huang Weiyi f88518d122 wusb: remove unused #include <version.h>
The file(s) below do not use LINUX_VERSION_CODE nor KERNEL_VERSION.
  drivers/usb/host/hwa-hc.c
  drivers/usb/host/whci/hcd.c
  drivers/usb/host/whci/int.c
  drivers/usb/host/whci/wusb.c
  drivers/usb/wusbcore/cbaf.c

This patch removes the said #include <version.h>.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-10-31 15:10:27 +00:00
David Vrabel 4656d5de95 wusb: reset WUSB devices with SetAddress(0)
Using a Reset Device IE to reset a WUSB device is too heavyweight as it
causes the devcie to disconnect (which the USB stack does not expect and
cannot handle).  Instead, do a SetAddress(0); SetAddress(AuthAddr) for
authenticated devices.

Unauthenticated devices will not be reset and the stack will have to rely
on the device timing out after TrustTimeout and disconnecting.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-10-28 12:10:25 +00:00
David Vrabel 4d2bea4ca0 wusb: do a proper channel stop
When stopping the WUSB channel the host should send Channel Stop IEs giving
the WUSB Channel Time of the last MMC.  Both WHCI and HWA hosts provide a
channel stop command for this.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-10-28 12:08:46 +00:00
David Vrabel d409f3bf47 wusb: disable verification of the key generation algorithms
Verifing the key generation algorithms could take too long on a freshly
booted system (due to lack of entropy) so disable the test unless a module
parameter (debug_crypto_verify) is specified.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-10-28 12:08:21 +00:00
David Vrabel cae1c11414 uwb: reference count reservations
Reference counting the struct uwb_rsv's is safer and easier to get right than
the transferring ownership of the structures from the PAL to reservation
manager.

This fixes an oops in the debug PAL after a reservation timed out.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-10-28 12:07:23 +00:00
David Vrabel 8092d7c978 uwb: don't use printk_ratelimit() so often
Avoid using printk_ratelimit() in many places because:
  - many were error messages reporting broken hardware (it's useful to
    get all of these).
  - the message itself wasn't useful so the message has been removed.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-10-16 13:56:53 +01:00
David Vrabel 92c4d9bd16 uwb: use kcalloc where appropriate
Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-10-15 14:50:10 +01:00
David Vrabel 6a7c3e464e uwb: depend on EXPERIMENTAL
The UWB stack has some sysfs APIs that will change thus it's best
marked as EXPERIMENTAL until these APIs are finalized.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:36 +01:00
Felipe Zimmerle f1fa035f2b wusb: wusb-cbaf (CBA driver) sysfs ABI simplification
Simplify the sysfs ABI of the wusb-cbaf (Cable Based Association)
driver: use one value per file and cause the write of the CHID to
fetch the CDID (instead of requiring a separate read).

Update the example wusb-cbaf script to work with this revised ABI.

Signed-off-by: Felipe Zimmerle <felipe.zimmerle@indt.org.br>
Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:35 +01:00
David Vrabel b60066c141 uwb: add symlinks in sysfs between radio controllers and PALs
Add a facility for PALs to have symlinks to their radio controller
(and vice-versa) and make WUSB host controllers use this.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:35 +01:00
Anderson Lizardo b0a81328c2 wusb: fix bmRequestType for Abort RPipe request
WUSB 1.0 (Table 8-4) mentions that Abort RPipe requests must have bmRequestType
equal to 0x25, although current implementation sets bmRequestType to 0xa5. This
patch fixes this typo.

Signed-off-by: Anderson Lizardo <anderson.lizardo@indt.org.br>
Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:32 +01:00
Anderson Lizardo f51c23baed wusb: fix error path for wusb_set_dev_addr()
Error path for wusb_set_dev_addr() was handled incorrectly. Fix it by
considering error only when return value is negative.

Signed-off-by: Anderson Lizardo <anderson.lizardo@indt.org.br>
Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:32 +01:00
Inaky Perez-Gonzalez df3654236e wusb: add the Wire Adapter (WA) core
Common code for supporting Host Wire Adapters and Device Wire Adapters.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:31 +01:00
Inaky Perez-Gonzalez 870d539504 wusb: add the USB wusb-cbaf driver
Add a driver for cable based associated of (Wireless) USB devices.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:30 +01:00
Greg Kroah-Hartman 470cc41503 wusb: add the Wireless USB core (build-system)
Add the WUSB build system (Kconfig and Kbuild) files.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:30 +01:00
Inaky Perez-Gonzalez d59db761b8 wusb: add the Wireless USB core (security)
Add the WUSB security (authentication) code.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:30 +01:00
Inaky Perez-Gonzalez b69fada68b wusb: add the Wireless USB core (protocol)
Add the WUSB protocol (MMC management and device connection) code.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:29 +01:00
Inaky Perez-Gonzalez 90ff96f224 wusb: add the Wireless USB core
Add support for Ceritified Wireless USB 1.0 to the USB stack.

This has been split into several patches for easier review.

core (this patch):
  - host controller infrastructure
  - cluster reservation
  - UWB PAL registration
  - fake root hub

protocol:
  - MMC management (start/stop, managing IEs)
  - device connection

security:
  - device authentication and authorization

build-system:
  - Kconfig and Kbuild files

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:29 +01:00