When accessing an encrypted directory without the key, userspace must
operate on filenames derived from the ciphertext names, which contain
arbitrary bytes. Since we must support filenames as long as NAME_MAX,
we can't always just base64-encode the ciphertext, since that may make
it too long. Currently, this is solved by presenting long names in an
abbreviated form containing any needed filesystem-specific hashes (e.g.
to identify a directory block), then the last 16 bytes of ciphertext.
This needs to be sufficient to identify the actual name on lookup.
However, there is a bug. It seems to have been assumed that due to the
use of a CBC (ciphertext block chaining)-based encryption mode, the last
16 bytes (i.e. the AES block size) of ciphertext would depend on the
full plaintext, preventing collisions. However, we actually use CBC
with ciphertext stealing (CTS), which handles the last two blocks
specially, causing them to appear "flipped". Thus, it's actually the
second-to-last block which depends on the full plaintext.
This caused long filenames that differ only near the end of their
plaintexts to, when observed without the key, point to the wrong inode
and be undeletable. For example, with ext4:
# echo pass | e4crypt add_key -p 16 edir/
# seq -f "edir/abcdefghijklmnopqrstuvwxyz012345%.0f" 100000 | xargs touch
# find edir/ -type f | xargs stat -c %i | sort | uniq | wc -l
100000
# sync
# echo 3 > /proc/sys/vm/drop_caches
# keyctl new_session
# find edir/ -type f | xargs stat -c %i | sort | uniq | wc -l
2004
# rm -rf edir/
rm: cannot remove 'edir/_A7nNFi3rhkEQlJ6P,hdzluhODKOeWx5V': Structure needs cleaning
...
To fix this, when presenting long encrypted filenames, encode the
second-to-last block of ciphertext rather than the last 16 bytes.
Although it would be nice to solve this without depending on a specific
encryption mode, that would mean doing a cryptographic hash like SHA-256
which would be much less efficient. This way is sufficient for now, and
it's still compatible with encryption modes like HEH which are strong
pseudorandom permutations. Also, changing the presented names is still
allowed at any time because they are only provided to allow applications
to do things like delete encrypted directories. They're not designed to
be used to persistently identify files --- which would be hard to do
anyway, given that they're encrypted after all.
For ease of backports, this patch only makes the minimal fix to both
ext4 and f2fs. It leaves ubifs as-is, since ubifs doesn't compare the
ciphertext block yet. Follow-on patches will clean things up properly
and make the filesystems use a shared helper function.
Fixes: 5de0b4d0cd ("ext4 crypto: simplify and speed up filename encryption")
Reported-by: Gwendal Grignou <gwendal@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If user has no key under an encrypted dir, fscrypt gives digested dentries.
Previously, when looking up a dentry, f2fs only checks its hash value with
first 4 bytes of the digested dentry, which didn't handle hash collisions fully.
This patch enhances to check entire dentry bytes likewise ext4.
Eric reported how to reproduce this issue by:
# seq -f "edir/abcdefghijklmnopqrstuvwxyz012345%.0f" 100000 | xargs touch
# find edir -type f | xargs stat -c %i | sort | uniq | wc -l
100000
# sync
# echo 3 > /proc/sys/vm/drop_caches
# keyctl new_session
# find edir -type f | xargs stat -c %i | sort | uniq | wc -l
99999
Cc: <stable@vger.kernel.org>
Reported-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
(fixed f2fs_dentry_hash() to work even when the hash is 0)
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
As ext4 and f2fs do, ubifs should check for consistent encryption
contexts during ->lookup() in an encrypted directory. This protects
certain users of filesystem encryption against certain types of offline
attacks.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
As for ext4, now that fscrypt_has_permitted_context() correctly handles
the case where we have the key for the parent directory but not the
child, f2fs_lookup() no longer has to work around it. Also add the same
warning message that ext4 uses.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now that fscrypt_has_permitted_context() correctly handles the case
where we have the key for the parent directory but not the child, we
don't need to try to work around this in ext4_lookup().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
To mitigate some types of offline attacks, filesystem encryption is
designed to enforce that all files in an encrypted directory tree use
the same encryption policy (i.e. the same encryption context excluding
the nonce). However, the fscrypt_has_permitted_context() function which
enforces this relies on comparing struct fscrypt_info's, which are only
available when we have the encryption keys. This can cause two
incorrect behaviors:
1. If we have the parent directory's key but not the child's key, or
vice versa, then fscrypt_has_permitted_context() returned false,
causing applications to see EPERM or ENOKEY. This is incorrect if
the encryption contexts are in fact consistent. Although we'd
normally have either both keys or neither key in that case since the
master_key_descriptors would be the same, this is not guaranteed
because keys can be added or removed from keyrings at any time.
2. If we have neither the parent's key nor the child's key, then
fscrypt_has_permitted_context() returned true, causing applications
to see no error (or else an error for some other reason). This is
incorrect if the encryption contexts are in fact inconsistent, since
in that case we should deny access.
To fix this, retrieve and compare the fscrypt_contexts if we are unable
to set up both fscrypt_infos.
While this slightly hurts performance when accessing an encrypted
directory tree without the key, this isn't a case we really need to be
optimizing for; access *with* the key is much more important.
Furthermore, the performance hit is barely noticeable given that we are
already retrieving the fscrypt_context and doing two keyring searches in
fscrypt_get_encryption_info(). If we ever actually wanted to optimize
this case we might start by caching the fscrypt_contexts.
Cc: stable@vger.kernel.org # 4.0+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
IFLA_PHYS_PORT_NAME is a string attribute, so terminate it with \0.
Otherwise libnl3 fails to validate netlink messages with this attribute.
"ip -detail a" assumes too that the attribute is NUL-terminated when
printing it. It often was, due to padding.
I noticed this as libvirtd failing to start on a system with sfc driver
after upgrading it to Linux 4.11, i.e. when sfc added support for
phys_port_name.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This fixes a race where vmbus callback for new packet arriving
could occur before NAPI is initialized.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
V2: using "aquantia" subsystem tag.
The command "ethtool -i ethX" should display driver name (driver: atlantic)
instead vendor name (driver: aquantia).
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently jbd2_write_superblock() silently adds REQ_SYNC to flags with
which journal superblock is written. Make this explicit by making flags
passed down to jbd2_write_superblock() contain REQ_SYNC.
CC: linux-ext4@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
head is previously null checked and so the 2nd null check on head
is redundant and therefore can be removed.
Detected by CoverityScan, CID#1399505 ("Logically dead code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit b685d3d65a "block: treat REQ_FUA and REQ_PREFLUSH as
synchronous" removed REQ_SYNC flag from WRITE_FUA implementation.
generic_make_request_checks() however strips REQ_FUA flag from a bio
when the storage doesn't report volatile write cache and thus write
effectively becomes asynchronous which can lead to performance
regressions. This affects superblock writes for ext4. Fix the problem
by marking superblock writes always as synchronous.
Fixes: b685d3d65a
CC: linux-ext4@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since netif_carrier_on() will do nothing if device's
carrier is already on, so it's unnecessary to do
carrier status check.
It's the same for netif_carrier_off().
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Depending on the passed @idle arg, there may be no need to calculate
'nr_free' or 'nr_clean' respectively in free_target_met() and
clean_target_met().
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
dm-cache's smq policy tries hard to do it's work during the idle periods
when there is no IO. But if there are no idle periods (eg, a long fio
run) we still need to allow some demotions and promotions to occur.
To achieve this, pass @idle=true to queue_promotion()'s
free_target_met() call so that free_target_met() doesn't short-circuit
the possibility of demotion simply because it isn't an idle period.
Fixes: b29d4986d0 ("dm cache: significant rework to leverage dm-bio-prison-v2")
Reported-by: John Harrigan <jharriga@redhat.com>
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Expose the fifo lists, cached next requests, batching state, and
dispatch list. It'd also be possible to add the sorted lists, but there
aren't already seq_file helpers for rbtrees.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This provides the infrastructure for schedulers to expose their internal
state through debugfs. We add a list of queue attributes and a list of
hctx attributes to struct elevator_type and wire them up when switching
schedulers.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Add missing seq_file.h header in blk-mq-debugfs.h
Signed-off-by: Jens Axboe <axboe@fb.com>
Originally, I tied debugfs registration/unregistration together with
sysfs. There's no reason to do this, and it's getting in the way of
letting schedulers define their own debugfs attributes. Instead, tie the
debugfs registration to the lifetime of the structures themselves.
The saner lifetimes mean we can also get rid of the extra mq directory
and move everything one level up. I.e., nvme0n1/mq/hctx0/tags is now
just nvme0n1/hctx0/tags.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
In commit e869b5462f ("blk-mq: Unregister debugfs attributes
earlier"), we shuffled the debugfs cleanup around so that the "state"
attribute was removed before we freed the blk-mq data structures.
However, later changes are going to undo that, so we need to explicitly
disallow running a dead queue.
[Omar: rebased and updated commit message]
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
A large part of blk-mq-debugfs.c is file_operations and seq_file
boilerplate. This sucks as is but will suck even more when schedulers
can define their own debugfs entries. Factor it all out into a single
blk_mq_debugfs_fops which multiplexes as needed. We store the
request_queue, blk_mq_hw_ctx, or blk_mq_ctx in the parent directory
dentry, which is kind of hacky, but it works.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
It's not clear what these numbered directories represent unless you
consult the code. We're about to get rid of the intermediate "mq"
directory, so these would be even more confusing without that context.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Slightly more readable, plus we also strip leading spaces.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
blk_queue_flags_store() currently truncates and returns a short write if
the operation being written is too long. This can give us weird results,
like here:
$ echo "run bar"
echo: write error: invalid argument
$ dmesg
[ 1103.075435] blk_queue_flags_store: unsupported operation bar. Use either 'run' or 'start'
Instead, return an error if the user does this. While we're here, make
the argument names consistent with everywhere else in this file.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Make sure the spelled out flag names match the definition. This also
adds a missing hctx state, BLK_MQ_S_START_ON_RUN, and a missing
cmd_flag, __REQ_NOUNMAP.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This reads more naturally than spaces.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
In commit 0d3b12584972 "nfs: Convert to separately allocated bdi" I have
wrongly cloned bdi reference in nfs_clone_super(). Further inspection
has shown that originally the code was actually allocating a new bdi (in
->clone_server callback) which was later registered in
nfs_fs_mount_common() and used for sb->s_bdi in nfs_initialise_sb().
This could later result in bdi for the original superblock not getting
unregistered when that superblock got shutdown (as the cloned sb still
held bdi reference) and later when a new superblock was created under
the same anonymous device number, a clash in sysfs has happened on bdi
registration:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 10284 at /linux-next/fs/sysfs/dir.c:31 sysfs_warn_dup+0x64/0x74
sysfs: cannot create duplicate filename '/devices/virtual/bdi/0:32'
Modules linked in: axp20x_usb_power gpio_axp209 nvmem_sunxi_sid sun4i_dma sun4i_ss virt_dma
CPU: 1 PID: 10284 Comm: mount.nfs Not tainted 4.11.0-rc4+ #14
Hardware name: Allwinner sun7i (A20) Family
[<c010f19c>] (unwind_backtrace) from [<c010bc74>] (show_stack+0x10/0x14)
[<c010bc74>] (show_stack) from [<c03c6e24>] (dump_stack+0x78/0x8c)
[<c03c6e24>] (dump_stack) from [<c0122200>] (__warn+0xe8/0x100)
[<c0122200>] (__warn) from [<c0122250>] (warn_slowpath_fmt+0x38/0x48)
[<c0122250>] (warn_slowpath_fmt) from [<c02ac178>] (sysfs_warn_dup+0x64/0x74)
[<c02ac178>] (sysfs_warn_dup) from [<c02ac254>] (sysfs_create_dir_ns+0x84/0x94)
[<c02ac254>] (sysfs_create_dir_ns) from [<c03c8b8c>] (kobject_add_internal+0x9c/0x2ec)
[<c03c8b8c>] (kobject_add_internal) from [<c03c8e24>] (kobject_add+0x48/0x98)
[<c03c8e24>] (kobject_add) from [<c048d75c>] (device_add+0xe4/0x5a0)
[<c048d75c>] (device_add) from [<c048ddb4>] (device_create_groups_vargs+0xac/0xbc)
[<c048ddb4>] (device_create_groups_vargs) from [<c048dde4>] (device_create_vargs+0x20/0x28)
[<c048dde4>] (device_create_vargs) from [<c02075c8>] (bdi_register_va+0x44/0xfc)
[<c02075c8>] (bdi_register_va) from [<c023d378>] (super_setup_bdi_name+0x48/0xa4)
[<c023d378>] (super_setup_bdi_name) from [<c0312ef4>] (nfs_fill_super+0x1a4/0x204)
[<c0312ef4>] (nfs_fill_super) from [<c03133f0>] (nfs_fs_mount_common+0x140/0x1e8)
[<c03133f0>] (nfs_fs_mount_common) from [<c03335cc>] (nfs4_remote_mount+0x50/0x58)
[<c03335cc>] (nfs4_remote_mount) from [<c023ef98>] (mount_fs+0x14/0xa4)
[<c023ef98>] (mount_fs) from [<c025cba0>] (vfs_kern_mount+0x54/0x128)
[<c025cba0>] (vfs_kern_mount) from [<c033352c>] (nfs_do_root_mount+0x80/0xa0)
[<c033352c>] (nfs_do_root_mount) from [<c0333818>] (nfs4_try_mount+0x28/0x3c)
[<c0333818>] (nfs4_try_mount) from [<c0313874>] (nfs_fs_mount+0x2cc/0x8c4)
[<c0313874>] (nfs_fs_mount) from [<c023ef98>] (mount_fs+0x14/0xa4)
[<c023ef98>] (mount_fs) from [<c025cba0>] (vfs_kern_mount+0x54/0x128)
[<c025cba0>] (vfs_kern_mount) from [<c02600f0>] (do_mount+0x158/0xc7c)
[<c02600f0>] (do_mount) from [<c0260f98>] (SyS_mount+0x8c/0xb4)
[<c0260f98>] (SyS_mount) from [<c0107840>] (ret_fast_syscall+0x0/0x3c)
Fix the problem by always creating new bdi for a superblock as we used
to do.
Reported-and-tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Fixes: 0d3b12584972ce5781179ad3f15cca3cdb5cae05
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Free memory correctly when an allocation fails on a loop and we free
backwards previously successful allocations.
Signed-off-by: Javier González <javier@cnexlabs.com>
Reviewed-by: Matias Bjørling <matias@cnexlabs.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Create nvme command before allocating a request using
nvme_alloc_request, which uses the command direction. Up until now, the
command has been zeroized, so all commands have been allocated as a
read operation.
Signed-off-by: Javier González <javier@cnexlabs.com>
Reviewed-by: Matias Bjørling <matias@cnexlabs.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
The #ifndef was removed in 75aaafb79f,
but it was also protecting smp_send_reschedule() in kvm_vcpu_kick().
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This makes the driver shift bits with BIT() which is used on other
places in the driver.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Two elements of the physical channel description was missing.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
There is no in-kernel code using these indexed register
defines, and their offsets are clearly defined right below.
Cut them.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Macs send the maximum buffer size in response on ioctl to validate
negotiate security information, which causes us to fail the mount
as the response buffer is larger than the expected response.
Changed ioctl response processing to allow for padding of validate
negotiate ioctl response and limit the maximum response size to
maximum buffer size.
Signed-off-by: Steve French <steve.french@primarydata.com>
CC: Stable <stable@vger.kernel.org>
Dan Carpenter sent a patch to remove a check in ftrace_match_record()
because the logic of the code made the check redundant. I looked deeper into
the code, and made the following logic table, with the three variables and
the result of the original code.
modname mod_matches exclude_mod result
------- ----------- ----------- ------
0 0 0 return 0
0 0 1 func_match
0 1 * < cannot exist >
1 0 0 return 0
1 0 1 func_match
1 1 0 func_match
1 1 1 return 0
Notice that when mod_matches == exclude mod, the result is always to
return 0, and when mod_matches != exclude_mod, then the result is to test
the function. This means we only need test if mod_matches is equal to
exclude_mod.
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
We know that "mod_matches" is true here so there is no need to check
again.
Link: http://lkml.kernel.org/r/20170331152130.GA4947@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Strcpy is inherently not safe, and strlcpy() should be used instead.
__trace_find_cmdline() uses strcpy() because the comms saved must have a
terminating nul character, but it doesn't hurt to add the extra protection
of using strlcpy() instead of strcpy().
Link: http://lkml.kernel.org/r/1493806274-13936-1-git-send-email-amit.pundir@linaro.org
Signed-off-by: Amey Telawane <ameyt@codeaurora.org>
[AmitP: Cherry-picked this commit from CodeAurora kernel/msm-3.10
https://source.codeaurora.org/quic/la/kernel/msm-3.10/commit/?id=2161ae9a70b12cf18ac8e5952a20161ffbccb477]
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
[ Updated change log and removed the "- 1" from len parameter ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Summary of modules changes for the 4.12 merge window:
- Minor code cleanups
- Fix section alignment for .init_array
Signed-off-by: Jessica Yu <jeyu@redhat.com>
-----BEGIN PGP SIGNATURE-----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=Z/Mw
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull modules updates from Jessica Yu:
- Minor code cleanups
- Fix section alignment for .init_array
* tag 'modules-for-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
kallsyms: Use bounded strnchr() when parsing string
module: Unify the return value type of try_module_get
module: set .init_array alignment to 8
Eric Biggers