Use the standard WARN_ON instead.
If a small kernel is desired, WARN_ON can be disabled globally.
Also remove SSB_DEBUG. Besides WARN_ON it only adds a tiny debug check.
Include this check unconditionally.
Signed-off-by: Michael Buesch <m@bues.ch>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Replace the ssb printk wrappers by standard print helpers.
Also remove SSB_SILENT. Nobody should use it anyway.
Originally submitted by Joe Perches <joe@perches.com>.
Modified to add dev_... based printks.
Signed-off-by: Michael Buesch <m@bues.ch>
Tested-by: Michael Buesch <m@bues.ch>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
SSB_PCICORE_HOSTMODE protects MIPS specific code that calls not exported
symbols pcibios_enable_device and register_pci_controller. This code is
supposed to be compiled only with ssb builtin.
This fixes:
ERROR: "pcibios_enable_device" [drivers/ssb/ssb.ko] undefined!
ERROR: "register_pci_controller" [drivers/ssb/ssb.ko] undefined!
make[1]: *** [scripts/Makefile.modpost:92: __modpost] Error 1
Reported-by: Matt Redfearn <matt.redfearn@mips.com>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
This reverts commit 882164a4a9.
Above commit added "SSB = y" dependency to the wrong symbol
SSB_DRIVER_PCICORE_POSSIBLE and prevented SSB_DRIVER_PCICORE from being
selected when needed. PCI core driver for core running in clienthost
mode is important for bus initialization. It's perfectly valid scenario
to have ssb built as module and use it with buses on PCI cards.
This fixes regression that affected all *module* users with PCI cards.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1572349
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Attempting to build ssb.ko with CONFIG_SSB_DRIVER_PCICORE=y results in
a build error due to use of symbols not exported from vmlinux:
ERROR: "pcibios_enable_device" [drivers/ssb/ssb.ko] undefined!
ERROR: "register_pci_controller" [drivers/ssb/ssb.ko] undefined!
make[1]: *** [scripts/Makefile.modpost:92: __modpost] Error 1
To prevent this, don't allow the host mode feature to be built if
CONFIG_SSB=m
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
After upgrading an old laptop to 4.15-rc9, I found that the eth0 and
wlan0 interfaces had disappeared. It turns out that the b43 and b44
drivers require SSB_PCIHOST_POSSIBLE which depends on
PCI_DRIVERS_LEGACY, a config option that only exists on Mips.
Fixes: 58eae1416b ("ssb: Disable PCI host for PCI_DRIVERS_GENERIC")
Cc: stable@vger.org
Signed-off-by: Sven Joachim <svenjoac@gmx.de>
Reviewed-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
The BPF verifier conflict was some minor contextual issue.
The TUN conflict was less trivial. Cong Wang fixed a memory leak of
tfile->tx_array in 'net'. This is an skb_array. But meanwhile in
net-next tun changed tfile->tx_arry into tfile->tx_ring which is a
ptr_ring.
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit d41e6858ba ("MIPS: Kconfig: Set default MIPS system type
as generic") changed the default MIPS platform to the "generic"
platform, which uses PCI_DRIVERS_GENERIC instead of PCI_DRIVERS_LEGACY,
various files in drivers/ssb/ have failed to build.
This is particularly due to the existence of struct pci_controller being
dependent on PCI_DRIVERS_LEGACY since commit c5611df968 ("MIPS: PCI:
Introduce CONFIG_PCI_DRIVERS_LEGACY"), so add that dependency to Kconfig
to prevent these files being built for the "generic" platform including
all{yes,mod}config builds.
Fixes: c5611df968 ("MIPS: PCI: Introduce CONFIG_PCI_DRIVERS_LEGACY")
Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: Michael Buesch <m@bues.ch>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-wireless@vger.kernel.org
Cc: linux-mips@linux-mips.org
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
No need to get into the submenu to disable all SSB-related
config entries.
This makes it easier to disable all SSB config options
without entering the submenu. It will also enable one
to see that en/dis-abled state from the outside menu.
This is only intended to change menuconfig UI, not change
the config dependencies.
Signed-off-by: Vincent Legoll <vincent.legoll@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Drivers that use the SSB sprom functionality typically 'select SSB_SPROM'
from Kconfig, but CONFIG_SSB_HOST_SOC misses this, which results in
a build failure unless at least one of the other drivers that selects
it is enabled:
drivers/built-in.o: In function `ssb_host_soc_get_invariants':
(.text+0x459494): undefined reference to `ssb_fill_sprom_with_fallback'
This adds the same select statement that is used elsewhere.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 541c9a84cd ("ssb: pick SoC invariants code from MIPS BCM47xx arch")
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
There is code in ssb fetching "invariants" that is basically a set of
board specific data. Every host requires its own implementation of
reading function. In ssb we have support for PCI, PCMCIA & SDIO.
For some (historical?) reason code reading "invariants" for SoC was
placed in arch code and provided by a callback. This is not needed
nowadays, so lets move that into ssb. This way we keep all "invariants"
functions in a single module making code cleaner.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
This allows saving a little of space when not using ssb on Broadcom SoC.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
The commit 21400f252a ("MIPS: BCM47XX: Make ssb init NVRAM instead of
bcm47xx polling it") introduces a dependency to SSB_SFLASH but did not
add it to the Kconfig.
drivers/ssb/driver_mipscore.c:216:36: error: 'struct ssb_mipscore' has no
member named 'sflash'
struct ssb_sflash *sflash = &mcore->sflash;
^
drivers/ssb/driver_mipscore.c:249:12: error: dereferencing pointer to
incomplete type
if (sflash->present) {
^
Signed-off-by: Adrien Schildknecht <adrien+dev@schischi.me>
Cc: m@bues.ch
Cc: zajec5@gmail.com
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/9598/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
With recent patches ssb can fetch info about serial flash and register
it as a platform device. No more reasons to mark it BROKEN.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
SSB_EMBEDDED needs functions from driver_pcicore which are only
available if SSD_DRIVER_HOSTMODE is selected so make it
depend on that symbol.
Fixes the following linking problem:
drivers/ssb/embedded.c:202:
undefined reference to `ssb_pcicore_plat_dev_init'
drivers/built-in.o: In function `ssb_pcibios_map_irq':
drivers/ssb/embedded.c:247:
undefined reference to `ssb_pcicore_pcibios_map_irq'
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: sibyte-users@bitmover.com
Cc: netdev@vger.kernel.org
Cc: Michael Buesch <m@bues.ch>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5484/
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Commit ec43b08b57 ("ssb: add GPIO driver")
added SSB_DRIVER_GPIO, which unconditionally selects GPIOLIB, causing
a Kconfig warning:
warning: (ARCH_REQUIRE_GPIOLIB && SSB_DRIVER_GPIO && BCMA_DRIVER_GPIO && MFD_TC6393XB && FB_VIA) selects GPIOLIB which has unmet direct dependencies (ARCH_WANT_OPTIONAL_GPIOLIB || ARCH_REQUIRE_GPIOLIB)
and build failure for m68k/allmodconfig:
In file included from drivers/ssb/ssb_private.h:5,
from drivers/ssb/main.c:12:
include/linux/ssb/ssb.h:440: error: field ‘gpio’ has incomplete type
make[4]: *** [drivers/ssb/main.o] Error 1
make[3]: *** [drivers/ssb/] Error 2
Turn the select into a dependency to fix this.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Register a GPIO driver to access the GPIOs provided by the chip.
The GPIOs of the SoC should always start at 0 and the other GPIOs could
start at a random position. There is just one SoC in a system and when
they start at 0 the number is predictable.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Patchwork: http://patchwork.linux-mips.org/patch/4591
Acked-by: Florian Fainelli <florian@openwrt.org>
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option
is used to configure any non-standard kernel with a much larger scope than
only small devices.
This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes
references to the option throughout the kernel. A new CONFIG_EMBEDDED
option is added that automatically selects CONFIG_EXPERT when enabled and
can be used in the future to isolate options that should only be
considered for embedded systems (RISC architectures, SLOB, etc).
Calling the option "EXPERT" more accurately represents its intention: only
expert users who understand the impact of the configuration changes they
are making should enable it.
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Acked-by: David Woodhouse <david.woodhouse@intel.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Greg KH <gregkh@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Robin Holt <holt@sgi.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add support for communicating with a Sonics Silicon Backplane through a
SDIO interface, as found in the Nintendo Wii WLAN daughter card.
The Nintendo Wii WLAN card includes a custom Broadcom 4318 chip with
a SDIO host interface.
Signed-off-by: Albert Herranz <albert_herranz@yahoo.es>
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
If the target system cannot support SSB, then don't show the menu option as
it'll simply be an empty submenu.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a rewrite of the DMA API for SSB devices.
This is needed, because the old (non-existing) "API" made too many bad
assumptions on the API of the host-bus (PCI).
This introduces an almost complete SSB-DMA-API that maps to the lowlevel
bus-API based on the bustype.
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This adds support for block based I/O to SSB.
This is needed in order to efficiently support PIO data
transfers to the card.
The block-I/O support is only compiled, if it's selected by the
weird driver that needs it. So there's no overhead for sane devices.
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This adds support for reading/writing the SPROM invariants
for PCMCIA based devices.
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This adds the Gigabit Ethernet driver for the SSB
Gigabit Ethernet core. This driver actually is a frontend to
the Tigon3 driver. So the real work is done by tg3.
This device is used in the Linksys WRT350N.
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
The bridge code was unnecessary enabled by the b44
driver, but it prevents the bcm43xx driver from
being loaded, as the bridge claims the same pci ids.
Now we enable the birdge only if the b43{legacy}
drivers are selected.
Signed-off-by: Alexey Zaytsev <alexey.zaytsev@gmail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This fixes the SSB watchdog access for devices without a chipcommon.
These devices have the watchdog on the extif.
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
fix build failure if PCMCIA=m but SSB=y:
drivers/built-in.o: In function `ssb_pcmcia_switch_coreidx':
: undefined reference to `pcmcia_access_configuration_register'
(fix symmetric bug for PCI too.)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
SSB is an SoC bus used in a number of embedded devices. The most
well-known of these devices is probably the Linksys WRT54G, but there
are others as well. The bus is also used internally on the BCM43xx
and BCM44xx devices from Broadcom.
This patch also includes support for SSB ID tables in modules, so
that SSB drivers can be loaded automatically.
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Büsch