Now, when we mount ext4 filesystem with '-o discard' option, we have to
issue all the discard commands for the blocks to be deallocated and
wait for the completion of the commands on the commit complete phase.
Because this procedure might involve a lot of sequential combinations of
issuing discard commands and waiting for that, the delay of this
procedure might be too much long, even to 17.0s in our test,
and it results in long commit delay and fsync() performance degradation.
To reduce this kind of delay, instead of adding callback for each
extent and handling all of them in a sequential manner on commit phase,
we instead add a separate list of extents to free to the superblock and
then process this list at once after transaction commits so that
we can issue all the discard commands in a parallel manner like XFS
filesystem.
Finally, we could enhance the discard command handling performance.
The result was such that 17.0s delay of a single commit in the worst
case has been enhanced to 4.8s.
Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Tested-by: Hobin Woo <hobin.woo@samsung.com>
Tested-by: Kitae Lee <kitae87.lee@samsung.com>
Reviewed-by: Jan Kara <jack@suse.cz>
The main purpose of mb cache is to achieve deduplication in
extended attributes. In use cases where opportunity for deduplication
is unlikely, it only adds overhead.
Add a mount option to explicitly turn off mb cache.
Suggested-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Ext4 now supports xattr values that are up to 64k in size (vfs limit).
Large xattr values are stored in external inodes each one holding a
single value. Once written the data blocks of these inodes are immutable.
The real world use cases are expected to have a lot of value duplication
such as inherited acls etc. To reduce data duplication on disk, this patch
implements a deduplicator that allows sharing of xattr inodes.
The deduplication is based on an in-memory hash lookup that is a best
effort sharing scheme. When a xattr inode is read from disk (i.e.
getxattr() call), its crc32c hash is added to a hash table. Before
creating a new xattr inode for a value being set, the hash table is
checked to see if an existing inode holds an identical value. If such an
inode is found, the ref count on that inode is incremented. On value
removal the ref count is decremented and if it reaches zero the inode is
deleted.
The quota charging for such inodes is manually managed. Every reference
holder is charged the full size as if there was no sharing happening.
This is consistent with how xattr blocks are also charged.
[ Fixed up journal credits calculation to handle inline data and the
rare case where an shared xattr block can get freed when two thread
race on breaking the xattr block sharing. --tytso ]
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
IS_NOQUOTA() indicates whether quota is disabled for an inode. Ext4
also uses it to check whether an inode is for a quota file. The
distinction currently doesn't matter because quota is disabled only
for the quota files. When we start disabling quota for other inodes
in the future, we will want to make the distinction clear.
Replace IS_NOQUOTA() call with ext4_is_quota_file() at places where
we are checking for quota files.
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There will be a second mb_cache instance that tracks ea_inodes. Make
existing names more explicit so that it is clear that they refer to
xattr block cache.
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since this is a xattr specific data structure it is cleaner to keep it in
xattr header file.
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Tracking struct inode * rather than the inode number eliminates the
repeated ext4_xattr_inode_iget() call later. The second call cannot
fail in practice but still requires explanation when it wants to ignore
the return value. Avoid the trouble and make things simple.
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
EXT4_XATTR_MAX_LARGE_EA_SIZE definition in ext4 is currently unused.
Besides, vfs enforces its own 64k limit which makes the 1MB limit in
ext4 redundant. Remove it.
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We don't need acls on xattr inodes because they are not directly
accessible from user mode.
Besides lockdep complains about recursive locking of xattr_sem as seen
below.
=============================================
[ INFO: possible recursive locking detected ]
4.11.0-rc8+ #402 Not tainted
---------------------------------------------
python/1894 is trying to acquire lock:
(&ei->xattr_sem){++++..}, at: [<ffffffff804878a6>] ext4_xattr_get+0x66/0x270
but task is already holding lock:
(&ei->xattr_sem){++++..}, at: [<ffffffff80489500>] ext4_xattr_set_handle+0xa0/0x5d0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&ei->xattr_sem);
lock(&ei->xattr_sem);
*** DEADLOCK ***
May be due to missing lock nesting notation
3 locks held by python/1894:
#0: (sb_writers#10){.+.+.+}, at: [<ffffffff803d829f>] mnt_want_write+0x1f/0x50
#1: (&sb->s_type->i_mutex_key#15){+.+...}, at: [<ffffffff803dda27>] vfs_setxattr+0x57/0xb0
#2: (&ei->xattr_sem){++++..}, at: [<ffffffff80489500>] ext4_xattr_set_handle+0xa0/0x5d0
stack backtrace:
CPU: 0 PID: 1894 Comm: python Not tainted 4.11.0-rc8+ #402
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
dump_stack+0x67/0x99
__lock_acquire+0x5f3/0x1830
lock_acquire+0xb5/0x1d0
down_read+0x2f/0x60
ext4_xattr_get+0x66/0x270
ext4_get_acl+0x43/0x1e0
get_acl+0x72/0xf0
posix_acl_create+0x5e/0x170
ext4_init_acl+0x21/0xc0
__ext4_new_inode+0xffd/0x16b0
ext4_xattr_set_entry+0x5ea/0xb70
ext4_xattr_block_set+0x1b5/0x970
ext4_xattr_set_handle+0x351/0x5d0
ext4_xattr_set+0x124/0x180
ext4_xattr_user_set+0x34/0x40
__vfs_setxattr+0x66/0x80
__vfs_setxattr_noperm+0x69/0x1c0
vfs_setxattr+0xa2/0xb0
setxattr+0x129/0x160
path_setxattr+0x87/0xb0
SyS_setxattr+0xf/0x20
entry_SYSCALL_64_fastpath+0x18/0xad
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Large xattr support is implemented for EXT4_FEATURE_INCOMPAT_EA_INODE.
If the size of an xattr value is larger than will fit in a single
external block, then the xattr value will be saved into the body
of an external xattr inode.
The also helps support a larger number of xattr, since only the headers
will be stored in the in-inode space or the single external block.
The inode is referenced from the xattr header via "e_value_inum",
which was formerly "e_value_block", but that field was never used.
The e_value_size still contains the xattr size so that listing
xattrs does not need to look up the inode if the data is not accessed.
struct ext4_xattr_entry {
__u8 e_name_len; /* length of name */
__u8 e_name_index; /* attribute name index */
__le16 e_value_offs; /* offset in disk block of value */
__le32 e_value_inum; /* inode in which value is stored */
__le32 e_value_size; /* size of attribute value */
__le32 e_hash; /* hash value of name and value */
char e_name[0]; /* attribute name */
};
The xattr inode is marked with the EXT4_EA_INODE_FL flag and also
holds a back-reference to the owning inode in its i_mtime field,
allowing the ext4/e2fsck to verify the correct inode is accessed.
[ Applied fix by Dan Carpenter to avoid freeing an ERR_PTR. ]
Lustre-Jira: https://jira.hpdd.intel.com/browse/LU-80
Lustre-bugzilla: https://bugzilla.lustre.org/show_bug.cgi?id=4424
Signed-off-by: Kalpak Shah <kalpak.shah@sun.com>
Signed-off-by: James Simmons <uja.ornl@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
This INCOMPAT_LARGEDIR feature allows larger directories to be created
in ldiskfs, both with directory sizes over 2GB and and a maximum htree
depth of 3 instead of the current limit of 2. These features are needed
in order to exceed the current limit of approximately 10M entries in a
single directory.
This patch was originally written by Yang Sheng to support the Lustre server.
[ Bumped the credits needed to update an indexed directory -- tytso ]
Signed-off-by: Liang Zhen <liang.zhen@intel.com>
Signed-off-by: Yang Sheng <yang.sheng@intel.com>
Signed-off-by: Artem Blagodarenko <artem.blagodarenko@seagate.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Now that we are passing a struct ext4_filename, we do not need to pass
around the original struct qstr too.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
file systems and for random write workloads into a preallocated file;
bug fixes and cleanups.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAlkPYB8ACgkQ8vlZVpUN
gaP1HwgApoMQGegtRIbCZKUzKBJ2S6vwIoPAMz62JuwngOyWygJ1T1TliKTitG04
XvijKpUHtEggMO/ZsUOCoyr2LzJlpVvvrJZsavEubO12LKreYMpvNraZF1GACYTb
lIZpdWkpcEz5WnPV/PXW/dEMcSMhnKe8tbmHXMyAouSC6a55F5Wp456KF/plqkHU
zkWTCDbEOtHThzpL8cthUL71ji62I3Op5jn/qOfKCm6/JtUlw5pYjWkRUNqqjSQE
uQqMpqLxI/VjOdEiBPxEF6A+ZudZmoBQKY15ibWCcHUPFOPqk4RdYz6VivRI7zrg
KrrKcdFT29MtKnRfAAoJcc0nJ4e1Iw==
=il74
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
- add GETFSMAP support
- some performance improvements for very large file systems and for
random write workloads into a preallocated file
- bug fixes and cleanups.
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
jbd2: cleanup write flags handling from jbd2_write_superblock()
ext4: mark superblock writes synchronous for nobarrier mounts
ext4: inherit encryption xattr before other xattrs
ext4: replace BUG_ON with WARN_ONCE in ext4_end_bio()
ext4: avoid unnecessary transaction stalls during writeback
ext4: preload block group descriptors
ext4: make ext4_shutdown() static
ext4: support GETFSMAP ioctls
vfs: add common GETFSMAP ioctl definitions
ext4: evict inline data when writing to memory map
ext4: remove ext4_xattr_check_entry()
ext4: rename ext4_xattr_check_names() to ext4_xattr_check_entries()
ext4: merge ext4_xattr_list() into ext4_listxattr()
ext4: constify static data that is never modified
ext4: trim return value and 'dir' argument from ext4_insert_dentry()
jbd2: fix dbench4 performance regression for 'nobarrier' mounts
jbd2: Fix lockdep splat with generic/270 test
mm: retry writepages() on ENOMEM when doing an data integrity writeback
Pull quota, reiserfs, udf and ext2 updates from Jan Kara:
"The branch contains changes to quota code so that it does not modify
persistent flags in inode->i_flags (it was the only place in kernel
doing that) and handle it inside filesystem's quotaon/off handlers
instead.
The branch also contains two UDF cleanups, a couple of reiserfs fixes
and one fix for ext2 quota locking"
* 'generic' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
ext4: Improve comments in ext4_quota_{on|off}()
udf: use kmap_atomic for memcpy copying
udf: use octal for permissions
quota: Remove dquot_quotactl_ops
reiserfs: Remove i_attrs_to_sd_attrs()
reiserfs: Remove useless setting of i_flags
jfs: Remove jfs_get_inode_flags()
ext2: Remove ext2_get_inode_flags()
ext4: Remove ext4_get_inode_flags()
quota: Stop setting IMMUTABLE and NOATIME flags on quota files
jfs: Set flags on quota files directly
ext2: Set flags on quota files directly
reiserfs: Set flags on quota files directly
ext4: Set flags on quota files directly
reiserfs: Protect dquot_writeback_dquots() by s_umount semaphore
reiserfs: Make cancel_old_flush() reliable
ext2: Call dquot_writeback_dquots() with s_umount held
reiserfs: avoid a -Wmaybe-uninitialized warning
Constify static data in ext4 that is never (intentionally) modified so
that it is placed in .rodata and benefits from memory protection.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In the initial implementation of ext4 encryption, the filename was
encrypted in ext4_insert_dentry(), which could fail and also required
access to the 'dir' inode. Since then ext4 filename encryption has been
changed to encrypt the filename earlier, so we can revert the additions
to ext4_insert_dentry().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now that all places setting inode->i_flags that should be reflected in
on-disk flags are gone, we can remove ext4_get_inode_flags() call.
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Jan Kara <jack@suse.cz>
Return enhanced file attributes from the Ext4 filesystem. This includes
the following:
(1) The inode creation time (i_crtime) as stx_btime, setting STATX_BTIME.
(2) Certain FS_xxx_FL flags are mapped to stx_attribute flags.
This requires that all ext4 inodes have a getattr call, not just some of
them, so to this end, split the ext4_getattr() function and only call part
of it where appropriate.
Example output:
[root@andromeda ~]# touch foo
[root@andromeda ~]# chattr +ai foo
[root@andromeda ~]# /tmp/test-statx foo
statx(foo) = 0
results=fff
Size: 0 Blocks: 0 IO Block: 4096 regular file
Device: 08:12 Inode: 2101950 Links: 1
Access: (0644/-rw-r--r--) Uid: 0 Gid: 0
Access: 2016-02-11 17:08:29.031795451+0000
Modify: 2016-02-11 17:08:29.031795451+0000
Change: 2016-02-11 17:11:11.987790114+0000
Birth: 2016-02-11 17:08:29.031795451+0000
Attributes: 0000000000000030 (-------- -------- -------- -------- -------- -------- -------- --ai----)
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull vfs 'statx()' update from Al Viro.
This adds the new extended stat() interface that internally subsumes our
previous stat interfaces, and allows user mode to specify in more detail
what kind of information it wants.
It also allows for some explicit synchronization information to be
passed to the filesystem, which can be relevant for network filesystems:
is the cached value ok, or do you need open/close consistency, or what?
From David Howells.
Andreas Dilger points out that the first version of the extended statx
interface was posted June 29, 2010:
https://www.spinics.net/lists/linux-fsdevel/msg33831.html
* 'rebased-statx' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
statx: Add a system call to make enhanced file info available
Add a system call to make extended file information available, including
file creation and some attribute flags where available through the
underlying filesystem.
The getattr inode operation is altered to take two additional arguments: a
u32 request_mask and an unsigned int flags that indicate the
synchronisation mode. This change is propagated to the vfs_getattr*()
function.
Functions like vfs_stat() are now inline wrappers around new functions
vfs_statx() and vfs_statx_fd() to reduce stack usage.
========
OVERVIEW
========
The idea was initially proposed as a set of xattrs that could be retrieved
with getxattr(), but the general preference proved to be for a new syscall
with an extended stat structure.
A number of requests were gathered for features to be included. The
following have been included:
(1) Make the fields a consistent size on all arches and make them large.
(2) Spare space, request flags and information flags are provided for
future expansion.
(3) Better support for the y2038 problem [Arnd Bergmann] (tv_sec is an
__s64).
(4) Creation time: The SMB protocol carries the creation time, which could
be exported by Samba, which will in turn help CIFS make use of
FS-Cache as that can be used for coherency data (stx_btime).
This is also specified in NFSv4 as a recommended attribute and could
be exported by NFSD [Steve French].
(5) Lightweight stat: Ask for just those details of interest, and allow a
netfs (such as NFS) to approximate anything not of interest, possibly
without going to the server [Trond Myklebust, Ulrich Drepper, Andreas
Dilger] (AT_STATX_DONT_SYNC).
(6) Heavyweight stat: Force a netfs to go to the server, even if it thinks
its cached attributes are up to date [Trond Myklebust]
(AT_STATX_FORCE_SYNC).
And the following have been left out for future extension:
(7) Data version number: Could be used by userspace NFS servers [Aneesh
Kumar].
Can also be used to modify fill_post_wcc() in NFSD which retrieves
i_version directly, but has just called vfs_getattr(). It could get
it from the kstat struct if it used vfs_xgetattr() instead.
(There's disagreement on the exact semantics of a single field, since
not all filesystems do this the same way).
(8) BSD stat compatibility: Including more fields from the BSD stat such
as creation time (st_btime) and inode generation number (st_gen)
[Jeremy Allison, Bernd Schubert].
(9) Inode generation number: Useful for FUSE and userspace NFS servers
[Bernd Schubert].
(This was asked for but later deemed unnecessary with the
open-by-handle capability available and caused disagreement as to
whether it's a security hole or not).
(10) Extra coherency data may be useful in making backups [Andreas Dilger].
(No particular data were offered, but things like last backup
timestamp, the data version number and the DOS archive bit would come
into this category).
(11) Allow the filesystem to indicate what it can/cannot provide: A
filesystem can now say it doesn't support a standard stat feature if
that isn't available, so if, for instance, inode numbers or UIDs don't
exist or are fabricated locally...
(This requires a separate system call - I have an fsinfo() call idea
for this).
(12) Store a 16-byte volume ID in the superblock that can be returned in
struct xstat [Steve French].
(Deferred to fsinfo).
(13) Include granularity fields in the time data to indicate the
granularity of each of the times (NFSv4 time_delta) [Steve French].
(Deferred to fsinfo).
(14) FS_IOC_GETFLAGS value. These could be translated to BSD's st_flags.
Note that the Linux IOC flags are a mess and filesystems such as Ext4
define flags that aren't in linux/fs.h, so translation in the kernel
may be a necessity (or, possibly, we provide the filesystem type too).
(Some attributes are made available in stx_attributes, but the general
feeling was that the IOC flags were to ext[234]-specific and shouldn't
be exposed through statx this way).
(15) Mask of features available on file (eg: ACLs, seclabel) [Brad Boyer,
Michael Kerrisk].
(Deferred, probably to fsinfo. Finding out if there's an ACL or
seclabal might require extra filesystem operations).
(16) Femtosecond-resolution timestamps [Dave Chinner].
(A __reserved field has been left in the statx_timestamp struct for
this - if there proves to be a need).
(17) A set multiple attributes syscall to go with this.
===============
NEW SYSTEM CALL
===============
The new system call is:
int ret = statx(int dfd,
const char *filename,
unsigned int flags,
unsigned int mask,
struct statx *buffer);
The dfd, filename and flags parameters indicate the file to query, in a
similar way to fstatat(). There is no equivalent of lstat() as that can be
emulated with statx() by passing AT_SYMLINK_NOFOLLOW in flags. There is
also no equivalent of fstat() as that can be emulated by passing a NULL
filename to statx() with the fd of interest in dfd.
Whether or not statx() synchronises the attributes with the backing store
can be controlled by OR'ing a value into the flags argument (this typically
only affects network filesystems):
(1) AT_STATX_SYNC_AS_STAT tells statx() to behave as stat() does in this
respect.
(2) AT_STATX_FORCE_SYNC will require a network filesystem to synchronise
its attributes with the server - which might require data writeback to
occur to get the timestamps correct.
(3) AT_STATX_DONT_SYNC will suppress synchronisation with the server in a
network filesystem. The resulting values should be considered
approximate.
mask is a bitmask indicating the fields in struct statx that are of
interest to the caller. The user should set this to STATX_BASIC_STATS to
get the basic set returned by stat(). It should be noted that asking for
more information may entail extra I/O operations.
buffer points to the destination for the data. This must be 256 bytes in
size.
======================
MAIN ATTRIBUTES RECORD
======================
The following structures are defined in which to return the main attribute
set:
struct statx_timestamp {
__s64 tv_sec;
__s32 tv_nsec;
__s32 __reserved;
};
struct statx {
__u32 stx_mask;
__u32 stx_blksize;
__u64 stx_attributes;
__u32 stx_nlink;
__u32 stx_uid;
__u32 stx_gid;
__u16 stx_mode;
__u16 __spare0[1];
__u64 stx_ino;
__u64 stx_size;
__u64 stx_blocks;
__u64 __spare1[1];
struct statx_timestamp stx_atime;
struct statx_timestamp stx_btime;
struct statx_timestamp stx_ctime;
struct statx_timestamp stx_mtime;
__u32 stx_rdev_major;
__u32 stx_rdev_minor;
__u32 stx_dev_major;
__u32 stx_dev_minor;
__u64 __spare2[14];
};
The defined bits in request_mask and stx_mask are:
STATX_TYPE Want/got stx_mode & S_IFMT
STATX_MODE Want/got stx_mode & ~S_IFMT
STATX_NLINK Want/got stx_nlink
STATX_UID Want/got stx_uid
STATX_GID Want/got stx_gid
STATX_ATIME Want/got stx_atime{,_ns}
STATX_MTIME Want/got stx_mtime{,_ns}
STATX_CTIME Want/got stx_ctime{,_ns}
STATX_INO Want/got stx_ino
STATX_SIZE Want/got stx_size
STATX_BLOCKS Want/got stx_blocks
STATX_BASIC_STATS [The stuff in the normal stat struct]
STATX_BTIME Want/got stx_btime{,_ns}
STATX_ALL [All currently available stuff]
stx_btime is the file creation time, stx_mask is a bitmask indicating the
data provided and __spares*[] are where as-yet undefined fields can be
placed.
Time fields are structures with separate seconds and nanoseconds fields
plus a reserved field in case we want to add even finer resolution. Note
that times will be negative if before 1970; in such a case, the nanosecond
fields will also be negative if not zero.
The bits defined in the stx_attributes field convey information about a
file, how it is accessed, where it is and what it does. The following
attributes map to FS_*_FL flags and are the same numerical value:
STATX_ATTR_COMPRESSED File is compressed by the fs
STATX_ATTR_IMMUTABLE File is marked immutable
STATX_ATTR_APPEND File is append-only
STATX_ATTR_NODUMP File is not to be dumped
STATX_ATTR_ENCRYPTED File requires key to decrypt in fs
Within the kernel, the supported flags are listed by:
KSTAT_ATTR_FS_IOC_FLAGS
[Are any other IOC flags of sufficient general interest to be exposed
through this interface?]
New flags include:
STATX_ATTR_AUTOMOUNT Object is an automount trigger
These are for the use of GUI tools that might want to mark files specially,
depending on what they are.
Fields in struct statx come in a number of classes:
(0) stx_dev_*, stx_blksize.
These are local system information and are always available.
(1) stx_mode, stx_nlinks, stx_uid, stx_gid, stx_[amc]time, stx_ino,
stx_size, stx_blocks.
These will be returned whether the caller asks for them or not. The
corresponding bits in stx_mask will be set to indicate whether they
actually have valid values.
If the caller didn't ask for them, then they may be approximated. For
example, NFS won't waste any time updating them from the server,
unless as a byproduct of updating something requested.
If the values don't actually exist for the underlying object (such as
UID or GID on a DOS file), then the bit won't be set in the stx_mask,
even if the caller asked for the value. In such a case, the returned
value will be a fabrication.
Note that there are instances where the type might not be valid, for
instance Windows reparse points.
(2) stx_rdev_*.
This will be set only if stx_mode indicates we're looking at a
blockdev or a chardev, otherwise will be 0.
(3) stx_btime.
Similar to (1), except this will be set to 0 if it doesn't exist.
=======
TESTING
=======
The following test program can be used to test the statx system call:
samples/statx/test-statx.c
Just compile and run, passing it paths to the files you want to examine.
The file is built automatically if CONFIG_SAMPLES is enabled.
Here's some example output. Firstly, an NFS directory that crosses to
another FSID. Note that the AUTOMOUNT attribute is set because transiting
this directory will cause d_automount to be invoked by the VFS.
[root@andromeda ~]# /tmp/test-statx -A /warthog/data
statx(/warthog/data) = 0
results=7ff
Size: 4096 Blocks: 8 IO Block: 1048576 directory
Device: 00:26 Inode: 1703937 Links: 125
Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041
Access: 2016-11-24 09:02:12.219699527+0000
Modify: 2016-11-17 10:44:36.225653653+0000
Change: 2016-11-17 10:44:36.225653653+0000
Attributes: 0000000000001000 (-------- -------- -------- -------- -------- -------- ---m---- --------)
Secondly, the result of automounting on that directory.
[root@andromeda ~]# /tmp/test-statx /warthog/data
statx(/warthog/data) = 0
results=7ff
Size: 4096 Blocks: 8 IO Block: 1048576 directory
Device: 00:27 Inode: 2 Links: 125
Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041
Access: 2016-11-24 09:02:12.219699527+0000
Modify: 2016-11-17 10:44:36.225653653+0000
Change: 2016-11-17 10:44:36.225653653+0000
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Fix up affected files that include this signal functionality via sched.h.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
->fault(), ->page_mkwrite(), and ->pfn_mkwrite() calls do not need to
take a vma and vmf parameter when the vma already resides in vmf.
Remove the vma parameter to simplify things.
[arnd@arndb.de: fix ARM build]
Link: http://lkml.kernel.org/r/20170125223558.1451224-1-arnd@arndb.de
Link: http://lkml.kernel.org/r/148521301778.19116.10840599906674778980.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Various cleanups
- Livelock fixes for eofblocks scanning
- Improved input verification for on-disk metadata
- Fix races in the copy on write remap mechanism
- Fix buffer io error timeout controls
- Streamlining of directio copy on write
- Asynchronous discard support
- Fix asserts when splitting delalloc reservations
- Don't bloat bmbt when right shifting extents
- Inode alignment fixes for 32k block sizes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Ga1F
-----END PGP SIGNATURE-----
Merge tag 'xfs-4.11-merge-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs updates from Darrick Wong:
"Here are the XFS changes for 4.11. We aren't introducing any major
features in this release cycle except for this being the first merge
window I've managed on my own. :)
Changes since last update:
- Various cleanups
- Livelock fixes for eofblocks scanning
- Improved input verification for on-disk metadata
- Fix races in the copy on write remap mechanism
- Fix buffer io error timeout controls
- Streamlining of directio copy on write
- Asynchronous discard support
- Fix asserts when splitting delalloc reservations
- Don't bloat bmbt when right shifting extents
- Inode alignment fixes for 32k block sizes"
* tag 'xfs-4.11-merge-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (39 commits)
xfs: remove XFS_ALLOCTYPE_ANY_AG and XFS_ALLOCTYPE_START_AG
xfs: simplify xfs_rtallocate_extent
xfs: tune down agno asserts in the bmap code
xfs: Use xfs_icluster_size_fsb() to calculate inode chunk alignment
xfs: don't reserve blocks for right shift transactions
xfs: fix len comparison in xfs_extent_busy_trim
xfs: fix uninitialized variable in _reflink_convert_cow
xfs: split indlen reservations fairly when under reserved
xfs: handle indlen shortage on delalloc extent merge
xfs: resurrect debug mode drop buffered writes mechanism
xfs: clear delalloc and cache on buffered write failure
xfs: don't block the log commit handler for discards
xfs: improve busy extent sorting
xfs: improve handling of busy extents in the low-level allocator
xfs: don't fail xfs_extent_busy allocation
xfs: correct null checks and error processing in xfs_initialize_perag
xfs: update ctime and mtime on clone destinatation inodes
xfs: allocate direct I/O COW blocks in iomap_begin
xfs: go straight to real allocations for direct I/O COW writes
xfs: return the converted extent in __xfs_reflink_convert_cow
...
primarily used for testing, but which can be useful on production
systems when a scratch volume is being destroyed and the data on it
doesn't need to be saved. This found (and we fixed) a number of bugs
with ext4's recovery to corrupted file system --- the bugs increased
the amount of data that could be potentially lost, and in the case of
the inline data feature, could cause the kernel to BUG.
Also included are a number of other bug fixes, including in ext4's
fscrypt, DAX, inline data support.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAlirXesACgkQ8vlZVpUN
gaMOzQf8Ct6uPatV+m855oR4dAbZr2+lY4A4C+vHDzBtSMkPRyLX8cuo8XcwfTIm
vPVyDnL6EPyhXPxxfItu+92wAq1m5mVpKo57d0Ft5lw0rHxNtJTgVSRzsQ7VDRjj
5qMHW2K7Bk7EjzTeW3SF8/3+hqpzkAvRtNCntcomk5h08+cWMC8JSnn1kqw+naIn
EcbrC72GZb8JUELogVXC2vU58lp50SSBdr3l005jqKc5BvljMvdJ0Izn/3RVyU7u
q7vtynhe2ScFcHe/UzL1QgmQOy32tJpbS0NHalW47aw3Ynmn4cSX0YhhT9FDjRNQ
VOOfo1m1sAg166x0E+Nn7FeghTSSyA==
=cPIf
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"For this cycle we add support for the shutdown ioctl, which is
primarily used for testing, but which can be useful on production
systems when a scratch volume is being destroyed and the data on it
doesn't need to be saved.
This found (and we fixed) a number of bugs with ext4's recovery to
corrupted file system --- the bugs increased the amount of data that
could be potentially lost, and in the case of the inline data feature,
could cause the kernel to BUG.
Also included are a number of other bug fixes, including in ext4's
fscrypt, DAX, inline data support"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (26 commits)
ext4: rename EXT4_IOC_GOINGDOWN to EXT4_IOC_SHUTDOWN
ext4: fix fencepost in s_first_meta_bg validation
ext4: don't BUG when truncating encrypted inodes on the orphan list
ext4: do not use stripe_width if it is not set
ext4: fix stripe-unaligned allocations
dax: assert that i_rwsem is held exclusive for writes
ext4: fix DAX write locking
ext4: add EXT4_IOC_GOINGDOWN ioctl
ext4: add shutdown bit and check for it
ext4: rename s_resize_flags to s_ext4_flags
ext4: return EROFS if device is r/o and journal replay is needed
ext4: preserve the needs_recovery flag when the journal is aborted
jbd2: don't leak modified metadata buffers on an aborted journal
ext4: fix inline data error paths
ext4: move halfmd4 into hash.c directly
ext4: fix use-after-iput when fscrypt contexts are inconsistent
jbd2: fix use after free in kjournald2()
ext4: fix data corruption in data=journal mode
ext4: trim allocation requests to group size
ext4: replace BUG_ON with WARN_ON in mb_find_extent()
...
It's very likely the file system independent ioctl name will be
FS_IOC_SHUTDOWN, so let's use the same name for the ext4 ioctl name.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Previously, each filesystem configured without encryption support would
define all the public fscrypt functions to their notsupp_* stubs. This
list of #defines had to be updated in every filesystem whenever a change
was made to the public fscrypt functions. To make things more
maintainable now that we have three filesystems using fscrypt, split the
old header fscrypto.h into several new headers. fscrypt_supp.h contains
the real declarations and is included by filesystems when configured
with encryption support, whereas fscrypt_notsupp.h contains the inline
stubs and is included by filesystems when configured without encryption
support. fscrypt_common.h contains common declarations needed by both.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We are currently using one bit in s_resize_flags; rename it in order
to allow more of the bits in that unsigned long for other purposes.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There was an unnecessary amount of complexity around requesting the
filesystem-specific key prefix. It was unclear why; perhaps it was
envisioned that different instances of the same filesystem type could
use different key prefixes, or that key prefixes could be binary.
However, neither of those things were implemented or really make sense
at all. So simplify the code by making key_prefix a const char *.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Multiple bugs were recently fixed in the "set encryption policy" ioctl.
To make it clear that fscrypt_process_policy() and fscrypt_get_policy()
implement ioctls and therefore their implementations must take standard
security and correctness precautions, rename them to
fscrypt_ioctl_set_policy() and fscrypt_ioctl_get_policy(). Make the
latter take in a struct file * to make it consistent with the former.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_sb_has_crypto() just called through to ext4_has_feature_encrypt(),
and all callers except one were already using the latter. So remove it
and switch its one caller to ext4_has_feature_encrypt().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently we just silently ignore flags that we don't understand (or
that cannot be manipulated) through EXT4_IOC_SETFLAGS and
EXT4_IOC_FSSETXATTR ioctls. This makes it problematic for the unused
flags to be used in future (some app may be inadvertedly setting them
and we won't notice until the flag gets used). Also this is inconsistent
with other filesystems like XFS or BTRFS which return EOPNOTSUPP when
they see a flag they cannot set.
ext4 has the additional problem that there are flags which are returned
by EXT4_IOC_GETFLAGS ioctl but which cannot be modified via
EXT4_IOC_SETFLAGS. So we have to be careful to ignore value of these
flags and not fail the ioctl when they are set (as e.g. chattr(1) passes
flags returned from EXT4_IOC_GETFLAGS to EXT4_IOC_SETFLAGS without any
masking and thus we'd break this utility).
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add EXT4_JOURNAL_DATA_FL and EXT4_EXTENTS_FL to EXT4_FL_USER_MODIFIABLE
to recognize that they are modifiable by userspace. So far we got away
without having them there because ext4_ioctl_setflags() treats them in a
special way. But it was really confusing like that.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The last user of ext4_aligned_io() was the DAX path in
ext4_direct_IO_write(). This usage was removed by Jan Kara's patch
entitled "ext4: Rip out DAX handling from direct IO path".
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reads and writes for DAX inodes should no longer end up in direct IO
code. Rip out the support and add a warning.
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Implement basic iomap_begin function that handles reading and use it for
DAX reads.
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
CURRENT_TIME_SEC and CURRENT_TIME are not y2038 safe.
current_time() will be transitioned to be y2038 safe
along with vfs.
current_time() returns timestamps according to the
granularities set in the super_block.
The granularity check in ext4_current_time() to call
current_time() or CURRENT_TIME_SEC is not required.
Use current_time() directly to obtain timestamps
unconditionally, and remove ext4_current_time().
Quota files are assumed to be on the same filesystem.
Hence, use current_time() for these files as well.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Return errors to the caller instead of declaring the file system
corrupted.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
This allows us to properly propagate errors back up to
ext4_truncate()'s callers. This also means we no longer have to
silently ignore some errors (e.g., when trying to add the inode to the
orphan inode list).
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Create a macro to calculate length + offset -> maximum blocks
This adds more readability.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Use the ext4_{has,set,clear}_feature_* helpers to replace the old
feature helpers.
Signed-off-by: Kaho Ng <ngkaho1234@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
When quota information is stored in quota files, we enable only quota
accounting on mount and enforcement is enabled only in response to
Q_QUOTAON quotactl. To make ext4 behavior consistent with XFS, we add a
possibility to enable quota enforcement on mount by specifying
corresponding quota mount option (usrquota, grpquota, prjquota).
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch removes the most parts of internal crypto codes.
And then, it modifies and adds some ext4-specific crypt codes to use the generic
facility.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If there are no pending blocks to be released after a commit, forcing
a journal commit has no hope of helping. It's possible that a commit
had just completed, so if there are now free blocks available for
allocation, it's worth retrying the commit.
Reported-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently ext4 treats DAX IO the same way as direct IO. I.e., it
allocates unwritten extents before IO is done and converts unwritten
extents afterwards. However this way DAX IO can race with page fault to
the same area:
ext4_ext_direct_IO() dax_fault()
dax_io()
get_block() - allocates unwritten extent
copy_from_iter_pmem()
get_block() - converts
unwritten block to
written and zeroes it
out
ext4_convert_unwritten_extents()
So data written with DAX IO gets lost. Similarly dax_new_buf() called
from dax_io() can overwrite data that has been already written to the
block via mmap.
Fix the problem by using pre-zeroed blocks for DAX IO the same way as we
use them for DAX mmap. The downside of this solution is that every
allocating write writes each block twice (once zeros, once data). Fixing
the race with locking is possible as well however we would need to
lock-out faults for the whole range written to by DAX IO. And that is
not easy to do without locking-out faults for the whole file which seems
too aggressive.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Daeho Jeong