Commit Graph

48 Commits

Author SHA1 Message Date
Alex Deucher f13f7731a2 drm/radeon: use status regs to determine what to reset (6xx/7xx)
When we attempt the reset the GPU, look at the status registers
to determine what blocks need to be reset.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-01-31 16:24:52 -05:00
Alex Deucher d3cb781e83 drm/radeon: rework GPU reset on r6xx/r7xx
Update the code to better match the recommended
programming sequence for soft reset.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-01-31 16:24:49 -05:00
Ilija Hadzic 4e872ae2bb drm/radeon: consolidate redundant macros and constants
After refactoring the _cs logic, we ended up with many
macros and constants that #define the same thing.
Clean'em up.

Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Reviewed-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-01-31 16:24:46 -05:00
Alex Deucher b997a8ba26 drm/radeon: add register headers for CP DMA on r6xx-SI
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-12-12 17:16:48 -05:00
Alex Deucher 4d75658bff drm/radeon/kms: Add initial support for async DMA on r6xx/r7xx
Uses the new multi-ring infrastucture.  6xx/7xx has a single
async DMA ring.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-12-10 16:53:23 -05:00
Marek Olšák 523885dec1 drm/radeon: add proper checking of RESOLVE_BOX command for r600-r700
Checking of the second colorbuffer was skipped on r700, because
CB_TARGET_MASK was 0xf. With r600, CB_TARGET_MASK is changed to 0xff,
so we must set the number of samples of the second colorbuffer to 1 in order
to pass the CS checker.
The DRM version is bumped, because RESOLVE_BOX is always rejected without this
fix on r600.

Signed-off-by: Marek Olšák <maraeo@gmail.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-29 12:11:00 -04:00
Marek Olšák c116cc9496 drm/radeon: allow CMASK and FMASK in the CS checker on r600-r700
MSAA is impossible without them.

Signed-off-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
2012-08-20 11:09:49 -04:00
Marek Olšák 6759a0a7a0 drm/radeon/kms: implement timestamp userspace query (v2)
Returns a snapshot of the GPU clock counter.  Needed
for certain OpenGL extensions.

v2: agd5f
- address Jerome's comments
- add function documentation

Signed-off-by: Marek Olšák <maraeo@gmail.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13 10:50:56 -04:00
Jerome Glisse 440a7cd87e drm/radeon: improve GPU lockup debugging info on r6xx/r7xx/r8xx/r9xx
Print various CP register that have valuable informations regarding
GPU lockup.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-07-19 22:28:07 -04:00
Alex Deucher 7c77bf2a1a drm/radeon: add support for STRMOUT_BASE_UPDATE on 7xx
Required for streamout.  Bump drm minor.

Marek v2: fix pkt->count check

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-16 14:30:56 +01:00
Alex Deucher b866d1334b drm/radeon: add some additional 6xx/7xx/EG register init
- SMX_SAR_CTL0 needs to be programmed correctly to prevent
problems with memory exports in certain cases.
- VC_ENHANCE needs to be initialized on 6xx/7xx.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-16 14:30:47 +01:00
Alex Deucher 416a2bd274 drm/radeon: fixup tiling group size and backendmap on r6xx-r9xx (v4)
Tiling group size is always 256bits on r6xx/r7xx/r8xx/9xx. Also fix and
simplify render backend map. This now properly sets up the backend map
on r6xx-9xx which should improve 3D performance.

Vadim benchmarked also:
Some benchmarks on juniper (5750), fullscreen 1920x1080,
first result - kernel 3.4.0+ (fb21affa), second - with these patches:

Lightsmark:   91 fps => 123 fps    +35%
Doom3:        74 fps => 101 fps    +36%

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-01 17:00:14 +01:00
Alex Deucher 0783986ad7 drm/radeon/hdmi: store info about all AFMT blocks
Introduce special struct radeon_afmt for this purpose.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-17 12:15:40 +01:00
Rafał Miłecki c6543a6e64 drm/radeon/kms/hdmi: use relative offsets, official regs
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Tested-by: Christian König <deathsimple@vodafone.de>
Reviewed-by: Christian König <deathsimple@vodafone.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-01 10:58:14 +01:00
Alex Deucher 3a2a67aa28 drm/radeon/kms: add register definitions for audio
This adds register definitions for HDMI/DP audio on
DCE2/3/4/5 hardware.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-04-24 09:50:13 +01:00
Jerome Glisse 88f50c8074 drm/radeon/kms: add htile support to the cs checker v3
For 6xx+.  Required for mesa to use htile support for HiZ/HiS.
Userspace will check radeon version 2.14 with is bumped either
by tiling patch or stream out patch. This patch only add support
for htile relocation which should be enough for any userspace
to implement the hyperz (using htile buffer) feature.

v2: Jerome: Fix size checking for htile buffer.
v3: Jerome: Adapt on top of r600/evergreen cs checker changes,
            also check htile surface in case only stencil is
            present.

Signed-off-by: Pierre-Eric Pelloux-Prayer <pelloux@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-26 09:53:22 +01:00
Alex Deucher c420c7454f drm/radeon/kms: add support for ucode loading on trinity (v2)
v2: fix check for MC ucode from Tom.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-21 06:55:57 +00:00
Dave Airlie 8229c885fe drm: Merge tag 'v3.3-rc7' into drm-core-next
Merge the fixes so far into core-next, needed to test
intel driver.

Conflicts:
	drivers/gpu/drm/i915/intel_ringbuffer.c
2012-03-15 10:24:32 +00:00
Christian König 0be70439f2 drm/radeon: fix a semaphore deadlock on pre cayman asics
The out of order execution of semaphore commands on
pre cayman asics doesn't work correctly and can
cause deadlocks, so turn it off for now.

Signed-off-by: Christian König <deathsimple@vodafone.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-07 14:07:29 +00:00
Jerome Glisse 285484e2d5 drm/radeon: add support for evergreen/ni tiling informations v11
evergreen and northern island gpu needs more informations for 2D tiling
than previous r6xx/r7xx. Add field to tiling ioctl to allow userspace
to provide those.

The v8 cs checking change to track color view on r6xx/r7xx doesn't
affect old userspace as old userspace always emited 0 for this register.

v2 fix r6xx/r7xx 2D tiling computation
v3 fix r6xx/r7xx height align for untiled surface & add support for
   tile split on evergreen and newer
v4 improve tiling debugging output
v5 fix tile split code for evergreen and newer
v6 set proper tile split for crtc register
v7 fix tile split limit value
v8 add COLOR_VIEW checking to r6xx/r7xx checker, add evergreen cs
   checking, update safe reg for r600, evergreen and cayman.
   Evergreen checking need some work around for stencil alignment
   issues
v9 fix tile split value range, fix compressed texture handling and
   mipmap calculation, allow evergreen check to be silencious in
   front of current broken userspace (depth/stencil alignment issue)
v10 fix eg 3d texture and compressed texture, fix r600 depth array,
    fix r600 color view computation, add support for evergreen stencil
    split
v11 more verbose debugging in some case

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-13 12:28:13 +00:00
Marek Olšák dd220a00e8 drm/radeon/kms: add support for streamout v7
v2: agd5f: add strmout CS checking, copy_dw register checking

v3: agd5f: don't use cs_check_reg() for copy_dw checking as it
will incorrectly patch the command stream for certain regs.

v4: agd5f: add warning if safe reg check fails for copy_dw

v5: agd5f: add stricter checking for 6xx/7xx

v6: agd5f: add range checking for copy_dw on eg+,
add sx_surface_sync to safe reg list for 7xx.

v7: agd5f: add stricter checking for eg+

Signed-off-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-13 12:09:11 +00:00
Christian König 15d3332f31 drm/radeon/kms: add support for semaphores v3
They are used to sync between rings, while fences
sync between a ring and the cpu.

v2 Fix radeon_semaphore_driver_fini when no semaphore were
allocated.

v3 Initialize list early on to avoid issue in case or early
error

Signed-off-by: Christian König <deathsimple@vodafone.de>
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-20 19:49:36 +00:00
Ilija Hadzic 3a38612e32 drm/radeon/kms: demystify r600 blit code
some 3d register bits look like magic in r600 blit functions
use predefined constants to make it more intuitive what they are

Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-18 10:06:23 +01:00
Alex Deucher fcb857abc4 drm/radeon/kms: fix typo in IH_CNTL swap bitfield
Only affects BE systems.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-07-07 17:47:12 +10:00
Marek Olšák fe6f0bd03d drm/radeon/kms: add missing Evergreen texture formats to the CS parser
BC6 and BC7 are described in ARB_texture_compression_bptc.

No idea what FMT_32_AS_32_32_32_32 is good for.

Signed-off-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-02 10:49:20 +10:00
Dave Airlie 34db18abd3 Merge remote branch 'intel/drm-intel-next' of ../drm-next into drm-core-next
* 'intel/drm-intel-next' of ../drm-next: (755 commits)
  drm/i915: Only wait on a pending flip if we intend to write to the buffer
  drm/i915/dp: Sanity check eDP existence
  drm/i915: Rebind the buffer if its alignment constraints changes with tiling
  drm/i915: Disable GPU semaphores by default
  drm/i915: Do not overflow the MMADDR write FIFO
  Revert "drm/i915: fix corruptions on i8xx due to relaxed fencing"
  drm/i915: Don't save/restore hardware status page address register
  drm/i915: don't store the reg value for HWS_PGA
  drm/i915: fix memory corruption with GM965 and >4GB RAM
  Linux 2.6.38-rc7
  Revert "TPM: Long default timeout fix"
  drm/i915: Re-enable GPU semaphores for SandyBridge mobile
  drm/i915: Replace vblank PM QoS with "Interrupt-Based AGPBUSY#"
  Revert "drm/i915: Use PM QoS to prevent C-State starvation of gen3 GPU"
  drm/i915: Allow relocation deltas outside of target bo
  drm/i915: Silence an innocuous compiler warning for an unused variable
  fs/block_dev.c: fix new kernel-doc warning
  ACPI: Fix build for CONFIG_NET unset
  mm: <asm-generic/pgtable.h> must include <linux/mm_types.h>
  x86: Use u32 instead of long to set reset vector back to 0
  ...

Conflicts:
	drivers/gpu/drm/i915/i915_gem.c
2011-03-14 14:15:13 +10:00
Dave Airlie 60b212f8dd drm/radeon: overhaul texture checking. (v3)
the texture checking code didn't work for block formats like s3tc,
this overhauls it to work for all types.

v2: add texture array support.
v3: add subsampled formats

Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-23 11:10:22 +10:00
Cédric Cano 4eace7fdfa drm/radeon/kms: 6xx/7xx big endian fixes
agd5f: minor cleanups

Signed-off-by: Cédric Cano <ccano@interfaceconcept.com>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-14 09:23:38 +10:00
Alex Deucher 9e46a48df2 drm/radeon/kms: add support for gen2 pcie link speeds
Supported on rv6xx/r7xx/evergreen.  Cards come up in gen1 mode.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07 14:11:14 +10:00
Alex Deucher 6f34be50bd drm/radeon/kms: add pageflip ioctl support (v3)
This adds support for dri2 pageflipping.

v2: precision updates from Mario Kleiner.
v3: Multihead fixes from Mario Kleiner; missing crtc offset
    add note about update pending bit on pre-avivo chips

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-22 11:51:08 +10:00
Alex Deucher 16790569ed drm/radeon/kms: fix and unify tiled buffer alignment checking for r6xx/7xx
Tiled buffers have the same alignment requirements regardless of
whether the surface is for db, cb, or textures.  Previously, the
calculations where inconsistent for each buffer type.

- Unify the alignment calculations in a common function
- Standardize the alignment units (pixels for pitch/height/depth,
bytes for base)
- properly check the buffer base alignments

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-18 14:55:37 +10:00
Alex Deucher d0f8a854c3 drm/radeon/kms/r6xx+: use new style fencing (v3)
On r6xx+ a newer fence mechanism was implemented to replace
the old wait_until plus scratch regs setup.  A single EOP event
will flush the destination caches, write a fence value, and generate
an interrupt.  This is the recommended fence mechanism on r6xx+ asics.

This requires my previous writeback patch.

v2: fix typo that enabled event fence checking on all asics
rather than just r6xx+.

v3: properly enable EOP interrupts
Should fix:
https://bugs.freedesktop.org/show_bug.cgi?id=29972

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-06 11:38:08 +10:00
Alex Deucher 812d046915 drm/radeon/kms/r7xx: add workaround for hw issue with HDP flush
Use of HDP_*_COHERENCY_FLUSH_CNTL can cause a hang in certain
situations.  Add workaround.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-02 10:06:18 +10:00
Alex Deucher 7f81337720 drm/radeon/kms: add tiling support to the cs checker for r6xx/r7xx
Check for relocs for DB_DEPTH_INFO, CB_COLOR*_INFO, and texture
resources.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-02 10:00:03 +10:00
Alex Deucher 21a8122ad3 drm/radeon/kms: add support for internal thermal sensors (v3)
rv6xx/rv7xx/evergreen families supported; older asics did
not have an internal thermal sensor.

Note, not all oems use the internal thermal sensor, so it's
only exposed in cases where it is used.

Note also, that most laptops use an oem specific ACPI solution for
GPU thermal information rather than using the internal thermal
sensor directly.

v2: export millidegrees celsius, use hwmon device properly.
v3: fix Kconfig

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-02 10:00:00 +10:00
Alex Deucher 5f77df368c drm/radeon/r6xx/r7xx: CS parser fixes
- Drop some more safe regs taht userspace shouldn't hit
- Constant base regs need relocs.  This allows us to use
constant buffers rather than the constant register file.
Also we don't want userspace to be able to set arbitrary
mc base values for the const caches.
- Track SQ_CONFIG so we know whether userspace is using
the cfile or constant buffers.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-31 13:12:17 +10:00
Jerome Glisse 961fb597c1 drm/radeon/kms: r600/r700 command stream checker
This patch add cs checker to r600/r700 hw. Command stream checking
will rewrite some of the cs value in order to restrict GPU access
to BO size. This doesn't break old userspace but just enforce safe
value. It should break any things that was using the r600/r700 cs
ioctl to do forbidden things (malicious software), though we are
not aware of such things.

Here is the list of thing we check :
- enforcing resource size
- enforcing color buffer slice tile max, will restrict cb access
- enforcing db buffer slice tile max, will restrict db access

We don't check for shader bigger than the BO in which they are
supposed to be, such use would lead to GPU lockup and is harmless
from security POV, as far as we can tell (note that even checking
for this wouldn't prevent someone to write bogus shader that lead
to lockup).

This patch has received as much testing as humanly possible with
old userspace to check that it didn't break such configuration.
However not all the applications out there were tested, thus it
might broke some odd, rare applications.

[airlied: fix rules for cs checker for parallel builds]

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-11 19:03:45 +10:00
Jerome Glisse c8c15ff1e9 drm/radeon: r6xx/r7xx possible security issue, system ram access
This patch workaround a possible security issue which can allow
user to abuse drm on r6xx/r7xx hw to access any system ram memory.
This patch doesn't break userspace, it detect "valid" old use of
CB_COLOR[0-7]_FRAG & CB_COLOR[0-7]_TILE registers and overwritte
the address these registers are pointing to with the one of the
last color buffer. This workaround will work for old mesa &
xf86-video-ati and any old user which did use similar register
programming pattern as those (we expect that there is no others
user of those ioctl except possibly a malicious one). This patch
add a warning if it detects such usage, warning encourage people
to update their mesa & xf86-video-ati. New userspace will submit
proper relocation.

Fix for xf86-video-ati / mesa (this kernel patch is enough to
prevent abuse, fix for userspace are to set proper cs stream and
avoid kernel warning) :
http://cgit.freedesktop.org/xorg/driver/xf86-video-ati/commit/?id=95d63e408cc88b6934bec84a0b1ef94dfe8bee7b
http://cgit.freedesktop.org/mesa/mesa/commit/?id=46dc6fd3ed5ef96cda53641a97bc68c3bc104a9f

Abusing this register to perform system ram memory is not easy,
here is outline on how it could be achieve. First attacker must
have access to the drm device and be able to submit command stream
throught cs ioctl. Then attacker must build a proper command stream
for r6xx/r7xx hw which will abuse the FRAG or TILE buffer to
overwrite the GPU GART which is in VRAM. To achieve so attacker
as to setup CB_COLOR[0-7]_FRAG or CB_COLOR[0-7]_TILE to point
to the GPU GART, then it has to find a way to write predictable
value into those buffer (with little cleverness i believe this
can be done but this is an hard task). Once attacker have such
program it can overwritte GPU GART to program GPU gart to point
anywhere in system memory. It then can reusse same method as he
used to reprogram GART to overwritte the system ram through the
GART mapping. In the process the attacker has to be carefull to
not overwritte any sensitive area of the GART table, like ring
or IB gart entry as it will more then likely lead to GPU lockup.
Bottom line is that i think it's very hard to use this flaw
to get system ram access but in theory one can achieve so.

Side note: I am not aware of anyone ever using the GPU as an
attack vector, nevertheless we take great care in the opensource
driver to try to detect and forbid malicious use of GPU. I don't
think the closed source driver are as cautious as we are.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2010-01-21 08:49:32 +10:00
Alex Deucher b500f68045 drm/radeon/kms: add regs and irq tracking bits for hpd
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-08 10:46:34 +10:00
Alex Deucher d8f60cfc93 drm/radeon/kms: Add support for interrupts on r6xx/r7xx chips (v3)
This enables the use of interrupts on r6xx/r7xx hardware.
Interrupts are implemented via a ring buffer.  The GPU adds
interrupts vectors to the ring and the host reads them off
in the interrupt handler.  The interrupt controller requires
firmware like the CP.  This firmware must be installed and
accessble to the firmware loader for interrupts to function.

MSIs don't seem to work on my RS780.  They work fine on all
my discrete cards.  I'm not sure about other RS780s or
RS880s.  I've disabled MSIs on RS780 and RS880, but it would
probably be worth checking on some other systems.

v2 - fix some checkpatch.pl problems;
     re-read the disp int status reg if we restart the ih;

v3 - remove the irq handler if r600_irq_init() fails;
     remove spinlock in r600_ih_ring_fini();
     move ih rb overflow check to r600_get_ih_wptr();
     move irq ack to separate function;

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-02 14:00:06 +10:00
Dave Airlie 23956dfa82 drm/radeon/kms: add HDP flushing for all GPUs.
rendercheck under kms on r600s was failing due to HDP flushing not happening.

This adds HDP flushing to the object wait function for r100->r700 families.

rendercheck passes basic tests on r600 with this change.

Acked-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-02 11:37:11 +10:00
Linus Torvalds 6b46362c0e Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (52 commits)
  drm/kms: Init the CRTC info fields for modes forced from the command line.
  drm/radeon/r600: CS parser updates
  drm/radeon/kms: add debugfs for power management for AtomBIOS devices
  drm/radeon/kms: initial mode validation support
  drm/radeon/kms/atom/dce3: call transmitter init on mode set
  drm/radeon/kms: store detailed connector info
  drm/radeon/kms/atom/dce3: fix up usPixelClock calculation for Transmitter tables
  drm/radeon/kms/r600: fix rs880 support v2
  drm/radeon/kms/r700: fix some typos in chip init
  drm/radeon/kms: remove some misleading debugging output
  drm/radeon/kms: stop putting VRAM at 0 in MC space on r600s.
  drm/radeon/kms: disable D1VGA and D2VGA if enabled
  drm/radeon/kms: Don't RMW CP_RB_CNTL
  drm/radeon/kms: fix coherency issues on AGP cards.
  drm/radeon/kms: fix rc410 suspend/resume.
  drm/radeon/kms: add quirk for hp dc5750
  drm/radeon/kms/atom: fix potential oops in spread spectrum code
  drm/kms: typo fix
  drm/radeon/kms/atom: Make card_info per device
  drm/radeon/kms/atom: Fix DVO support
  ...
2009-11-11 11:32:04 -08:00
Alex Deucher a39533b4dd drm/radeon/r600: CS parser updates
Add some additional regs that require relocs.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-11-10 13:41:07 +10:00
Alex Deucher 5885b7a9f4 drm/radeon/kms: fix vram_width calculation on r6xx/r7xx
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-26 13:28:19 +10:00
Dave Airlie c1176d6f03 Merge branch 'drm-next' of ../drm-next into drm-linus
conflict in radeon since new init path merged with vga arb code.

Conflicts:
	drivers/gpu/drm/radeon/radeon.h
	drivers/gpu/drm/radeon/radeon_asic.h
	drivers/gpu/drm/radeon/radeon_device.c
2009-10-08 14:03:05 +10:00
Jerome Glisse 1a029b768f drm/radeon/kms: Fix AGP support for R600/RV770 family (v2)
For AGP to work unmapped access must cover VRAM & AGP as
AGP is treated like VRAM by the GPU (ie physical address).
This patch properly setup the virtual memory system aperture
to cover AGP if AGP is enabled. It seems that there is memory
corruption after resume when using AGP (RV770 seems unaffected
thought). Version 2 just fix merge issue with updated AGP
fallback patch.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-08 09:40:04 +10:00
Dave Airlie 28d520433b drm/vgaarb: add VGA arbitration support to the drm and kms.
VGA arb requires DRM support for non-kms drivers, to turn on/off
irqs when disabling the mem/io regions.

VGA arb requires KMS support for GPUs where we can turn off VGA
decoding. Currently we know how to do this for intel and radeon
kms drivers, which allows them to be removed from the arbiter.

This patch comes from Fedora rawhide kernel.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-21 15:00:27 +10:00
Jerome Glisse 3ce0a23d2d drm/radeon/kms: add r600 KMS support
This adds the r600 KMS + CS support to the Linux kernel.

The r600 TTM support is quite basic and still needs more
work esp around using interrupts, but the polled fencing
should work okay for now.

Also currently TTM is using memcpy to do VRAM moves,
the code is here to use a 3D blit to do this, but
isn't fully debugged yet.

Authors:
Alex Deucher <alexdeucher@gmail.com>
Dave Airlie <airlied@redhat.com>
Jerome Glisse <jglisse@redhat.com>

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-08 11:15:52 +10:00