The commit 992b03b88e ("batman-adv: Don't always reallocate the
fragmentation skb head") removed the last user of functions from
soft-interface.h.
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
The only way to automatically drop batadv mesh interfaces when all soft
interfaces were removed was dropped with the sysfs support. It is no longer
needed to have them handled by kernel anymore.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
The debugfs support in batman-adv was marked as deprecated by the commit
00caf6a2b3 ("batman-adv: Mark debugfs functionality as deprecated") and
scheduled for removal in 2021.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
The sysfs in batman-adv support was marked as deprecated by the commit
42cdd52148 ("batman-adv: ABI: Mark sysfs files as deprecated") and
scheduled for removal in 2021.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
A batadv net_device is associated to a B.A.T.M.A.N. routing algorithm. This
algorithm has to be selected before the interface is initialized and cannot
be changed after that. The only way to select this algorithm was a module
parameter which specifies the default algorithm used during the creation of
the net_device.
This module parameter is writeable over
/sys/module/batman_adv/parameters/routing_algo and thus allows switching of
the routing algorithm:
1. change routing_algo parameter
2. create new batadv net_device
But this is not race free because another process can be scheduled between
1 + 2 and in that time frame change the routing_algo parameter again.
It is much cleaner to directly provide this information inside the
rtnetlink's RTM_NEWLINK message. The two processes would be (in regards of
the creation parameter of their batadv interfaces) be isolated. This also
eases the integration of batadv devices inside tools like network-manager
or systemd-networkd which are not expecting to operate on /sys before a new
net_device is created.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
The batadv generic netlink family can be used to retrieve the current state
and set various configuration settings. But there are also settings which
must be set before the actual interface is created.
The rtnetlink already uses IFLA_INFO_DATA to allow net_device families to
transfer such configurations. The minimal required functionality for this
is now available for the batadv rtnl_link_ops. Also a new IFLA class of
attributes will be attached to it because rtnetlink only allows 51
different attributes but batadv_nl_attrs already contains 62 attributes.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
The commit b296a6d533 ("kernel.h: split out min()/max() et al. helpers")
moved the min/max helper functionality from kernel.h to minmax.h. Adjust
the kernel code accordingly to avoid fragile indirect includes.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
When a packet is fragmented by batman-adv, the original batman-adv header
is not modified. Only a new fragmentation is inserted between the original
one and the ethernet header. The code must therefore make sure that it has
a writable region of this size in the skbuff head.
But it is not useful to always reallocate the skbuff by this size even when
there would be more than enough headroom still in the skb. The reallocation
is just to costly during in this codepath.
Fixes: ee75ed8887 ("batman-adv: Fragment and send skbs larger than mtu")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
The batadv net_device is trying to propagate the needed_headroom and
needed_tailroom from the lower devices. This is needed to avoid cost
intensive reallocations using pskb_expand_head during the transmission.
But the fragmentation code split the skb's without adding extra room at the
end/beginning of the various fragments. This reduced the performance of
transmissions over complex scenarios (batadv on vxlan on wireguard) because
the lower devices had to perform the reallocations at least once.
Fixes: ee75ed8887 ("batman-adv: Fragment and send skbs larger than mtu")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
If a batman-adv packets has to be fragmented, then the original batman-adv
packet header is not stripped away. Instead, only a new header is added in
front of the packet after it was split.
This size must be considered to avoid cost intensive reallocations during
the transmission through the various device layers.
Fixes: 7bca68c784 ("batman-adv: Add lower layer needed_(head|tail)room to own ones")
Reported-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
If THIS_MODULE is not set, the module would be removed while debugfs is
being used.
It eventually makes kernel panic.
Fixes: c6c8fea297 ("net: Add batman-adv meshing protocol")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Bulk of the genetlink users can use smaller ops, move them.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since now we have src in br_ip, u no longer makes sense so rename
it to dst. No functional changes.
v2: fix build with CONFIG_BATMAN_ADV_MCAST
CC: Marek Lindner <mareklindner@neomailbox.ch>
CC: Simon Wunderlich <sw@simonwunderlich.de>
CC: Antonio Quartulli <a@unstable.cc>
CC: Sven Eckelmann <sven@narfation.org>
CC: b.a.t.m.a.n@lists.open-mesh.org
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Two minor conflicts:
1) net/ipv4/route.c, adding a new local variable while
moving another local variable and removing it's
initial assignment.
2) drivers/net/dsa/microchip/ksz9477.c, overlapping changes.
One pretty prints the port mode differently, whilst another
changes the driver to try and obtain the port mode from
the port node rather than the switch node.
Signed-off-by: David S. Miller <davem@davemloft.net>
Scenario:
* Multicast frame send from BLA backbone gateways (multiple nodes
with their bat0 bridged together, with BLA enabled) sharing the same
LAN to nodes in the mesh
Issue:
* Nodes receive the frame multiple times on bat0 from the mesh,
once from each foreign BLA backbone gateway which shares the same LAN
with another
For multicast frames via batman-adv broadcast packets coming from the
same BLA backbone but from different backbone gateways duplicates are
currently detected via a CRC history of previously received packets.
However this CRC so far was not performed for multicast frames received
via batman-adv unicast packets. Fixing this by appyling the same check
for such packets, too.
Room for improvements in the future: Ideally we would introduce the
possibility to not only claim a client, but a complete originator, too.
This would allow us to only send a multicast-in-unicast packet from a BLA
backbone gateway claiming the node and by that avoid potential redundant
transmissions in the first place.
Fixes: 279e89b228 ("batman-adv: add broadcast duplicate check")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Scenario:
* Multicast frame send from mesh to a BLA backbone (multiple nodes
with their bat0 bridged together, with BLA enabled)
Issue:
* BLA backbone nodes receive the frame multiple times on bat0,
once from mesh->bat0 and once from each backbone_gw from LAN
For unicast, a node will send only to the best backbone gateway
according to the TQ. However for multicast we currently cannot determine
if multiple destination nodes share the same backbone if they don't share
the same backbone with us. So we need to keep sending the unicasts to
all backbone gateways and let the backbone gateways decide which one
will forward the frame. We can use the CLAIM mechanism to make this
decision.
One catch: The batman-adv gateway feature for DHCP packets potentially
sends multicast packets in the same batman-adv unicast header as the
multicast optimizations code. And we are not allowed to drop those even
if we did not claim the source address of the sender, as for such
packets there is only this one multicast-in-unicast packet.
How can we distinguish the two cases?
The gateway feature uses a batman-adv unicast 4 address header. While
the multicast-to-unicasts feature uses a simple, 3 address batman-adv
unicast header. So let's use this to distinguish.
Fixes: fe2da6ff27 ("batman-adv: check incoming packet type for bla")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Scenario:
* Multicast frame send from a BLA backbone (multiple nodes with
their bat0 bridged together, with BLA enabled)
Issue:
* BLA backbone nodes receive the frame multiple times on bat0
For multicast frames received via batman-adv broadcast packets the
originator of the broadcast packet is checked before decapsulating and
forwarding the frame to bat0 (batadv_bla_is_backbone_gw()->
batadv_recv_bcast_packet()). If it came from a node which shares the
same BLA backbone with us then it is not forwarded to bat0 to avoid a
loop.
When sending a multicast frame in a non-4-address batman-adv unicast
packet we are currently missing this check - and cannot do so because
the batman-adv unicast packet has no originator address field.
However, we can simply fix this on the sender side by only sending the
multicast frame via unicasts to interested nodes which do not share the
same BLA backbone with us. This also nicely avoids some unnecessary
transmissions on mesh side.
Note that no infinite loop was observed, probably because of dropping
via batadv_interface_tx()->batadv_bla_tx(). However the duplicates still
utterly confuse switches/bridges, ICMPv6 duplicate address detection and
neighbor discovery and therefore leads to long delays before being able
to establish TCP connections, for instance. And it also leads to the Linux
bridge printing messages like:
"br-lan: received packet on eth1 with own address as source address ..."
Fixes: 2d3f6ccc4e ("batman-adv: Modified forwarding behaviour for multicast packets")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
The fix for receiving (internally generated) bla packets outside the
interrupt context introduced the usage of in_interrupt(). But this
functionality is only defined in linux/preempt.h which was not included
with the same patch.
Fixes: 279e89b228 ("batman-adv: bla: use netif_rx_ni when not in interrupt context")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
The unicast packet rerouting code makes several assumptions. For
instance it assumes that there is always exactly one destination in the
TT. This breaks for multicast frames in a unicast packets in several ways:
For one thing if there is actually no TT entry and the destination node
was selected due to the multicast tvlv flags it announced. Then an
intermediate node will wrongly drop the packet.
For another thing if there is a TT entry but the TTVN of this entry is
newer than the originally addressed destination node: Then the
intermediate node will wrongly redirect the packet, leading to
duplicated multicast packets at a multicast listener and missing
packets at other multicast listeners or multicast routers.
Fixing this by not applying the unicast packet rerouting to batman-adv
unicast packets with a multicast payload. We are not able to detect a
roaming multicast listener at the moment and will just continue to send
the multicast frame to both the new and old destination for a while in
case of such a roaming multicast listener.
Fixes: a73105b8d4 ("batman-adv: improved client announcement mechanism")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
We got slightly different patches removing a double word
in a comment in net/ipv4/raw.c - picked the version from net.
Simple conflict in drivers/net/ethernet/ibm/ibmvnic.c. Use cached
values instead of VNIC login response buffer (following what
commit 507ebe6444 ("ibmvnic: Fix use-after-free of VNIC login
response buffer") did).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It seems that due to a copy & paste error the void pointer
in batadv_choose_backbone_gw() is cast to the wrong type.
Fixing this by using "struct batadv_bla_backbone_gw" instead of "struct
batadv_bla_claim" which better matches the caller's side.
For now it seems that we were lucky because the two structs both have
their orig/vid and addr/vid in the beginning. However I stumbled over
this issue when I was trying to add some debug variables in front of
"orig" in batadv_backbone_gw, which caused hash lookups to fail.
Fixes: 07568d0369 ("batman-adv: don't rely on positions in struct for hashing")
Signed-off-by: Linus Lüssing <ll@simonwunderlich.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
batadv_bla_send_claim() gets called from worker thread context through
batadv_bla_periodic_work(), thus netif_rx_ni needs to be used in that
case. This fixes "NOHZ: local_softirq_pending 08" log messages seen
when batman-adv is enabled.
Fixes: 23721387c4 ("batman-adv: add basic bridge loop avoidance code")
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@haltian.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
The own OGM check is currently misplaced and can lead to the following
issues:
For one thing we might receive an aggregated OGM from a neighbor node
which has our own OGM in the first place. We would then not only skip
our own OGM but erroneously also any other, following OGM in the
aggregate.
For another, we might receive an OGM aggregate which has our own OGM in
a place other then the first one. Then we would wrongly not skip this
OGM, leading to populating the orginator and gateway table with ourself.
Fixes: 9323158ef9 ("batman-adv: OGMv2 - implement originators logic")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
The gateway client code can try to optimize the delivery of DHCP packets to
avoid broadcasting them through the whole mesh. But also transmissions to
the client can be optimized by looking up the destination via the chaddr of
the DHCP packet.
But the chaddr is currently only done when chaddr is fully inside the
non-paged area of the skbuff. Otherwise it will not be initialized and the
unoptimized path should have been taken.
But the implementation didn't handle this correctly. It didn't retrieve the
correct chaddr but still tried to perform the TT lookup with this
uninitialized memory.
Reported-by: syzbot+ab16e463b903f5a37036@syzkaller.appspotmail.com
Fixes: 6c413b1c22 ("batman-adv: send every DHCP packet as bat-unicast")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Acked-by: Antonio Quartulli <a@unstable.cc>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
The commit c0842fbc1b ("random32: move the pseudo-random 32-bit
definitions to prandom.h") introduced a new header for the pseudo random
functions from (previously) linux/random.h. One future goal of the
prandom.h change is to make code to switch just the new header file and to
avoid the implicit include. This would allow the removal of the implicit
include from random.h
Signed-off-by: Sven Eckelmann <sven@narfation.org>
checkpatch found various instances of "Possible repeated word" in various
comments.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Delete the doubled word "time" in a comment.
Delete the doubled word "address" in a comment.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
The function batadv_hardif_remove_interfaces was meant to remove all
interfaces which are currently in the list of known (compatible) hardifs
during module unload. But the function unregister_netdevice_notifier is
called in batadv_exit before batadv_hardif_remove_interfaces. This will
trigger NETDEV_UNREGISTER events for all available interfaces and in this
process remove all interfaces from batadv_hardif_list. And
batadv_hardif_remove_interfaces only operated on this (empty) list.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
In some setups multiple hard interfaces with similar link qualities
or throughput values are available. But people have expressed the desire
to consider one of them as a backup only.
Some creative solutions are currently in use: Such people are
configuring multiple batman-adv mesh/soft interfaces, wire them
together with some veth pairs and then tune the hop penalty to achieve
an effect similar to a tunable per interface hop penalty.
This patch introduces a new, configurable, per hard interface hop penalty
to simplify such setups.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
The dynamic key update for addr_list_lock still causes troubles,
for example the following race condition still exists:
CPU 0: CPU 1:
(RCU read lock) (RTNL lock)
dev_mc_seq_show() netdev_update_lockdep_key()
-> lockdep_unregister_key()
-> netif_addr_lock_bh()
because lockdep doesn't provide an API to update it atomically.
Therefore, we have to move it back to static keys and use subclass
for nest locking like before.
In commit 1a33e10e4a ("net: partially revert dynamic lockdep key
changes"), I already reverted most parts of commit ab92d68fc2
("net: core: add generic lockdep keys").
This patch reverts the rest and also part of commit f3b0a18bb6
("net: remove unnecessary variables and callback"). After this
patch, addr_list_lock changes back to using static keys and
subclasses to satisfy lockdep. Thanks to dev->lower_level, we do
not have to change back to ->ndo_get_lock_subclass().
And hopefully this reduces some syzbot lockdep noises too.
Reported-by: syzbot+f3a0e80c34b3fc28ac5e@syzkaller.appspotmail.com
Cc: Taehee Yoo <ap420073@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Fix revert dynamic lockdep key changes for batman-adv,
by Sven Eckelmann
- use rcu_replace_pointer() where appropriate, by Antonio Quartulli
- Revert "disable ethtool link speed detection when auto negotiation
off", by Sven Eckelmann
-----BEGIN PGP SIGNATURE-----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=vDHL
-----END PGP SIGNATURE-----
Merge tag 'batadv-next-for-davem-20200526' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
This cleanup patchset includes the following patches:
- Fix revert dynamic lockdep key changes for batman-adv,
by Sven Eckelmann
- use rcu_replace_pointer() where appropriate, by Antonio Quartulli
- Revert "disable ethtool link speed detection when auto negotiation
off", by Sven Eckelmann
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The commit 8c46fcd783 ("batman-adv: disable ethtool link speed detection
when auto negotiation off") disabled the usage of ethtool's link_ksetting
when auto negotation was enabled due to invalid values when used with
tun/tap virtual net_devices. According to the patch, automatic measurements
should be used for these kind of interfaces.
But there are major flaws with this argumentation:
* automatic measurements are not implemented
* auto negotiation has nothing to do with the validity of the retrieved
values
The first point has to be fixed by a longer patch series. The "validity"
part of the second point must be addressed in the same patch series by
dropping the usage of ethtool's link_ksetting (thus always doing automatic
measurements over ethernet).
Drop the patch again to have more default values for various net_device
types/configurations. The user can still overwrite them using the
batadv_hardif's BATADV_ATTR_THROUGHPUT_OVERRIDE.
Reported-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
In commit a63fc6b75c ("rcu: Upgrade rcu_swap_protected() to
rcu_replace_pointer()") a new helper macro named rcu_replace_pointer() was
introduced to simplify code requiring to switch an rcu pointer to a new
value while extracting the old one.
Use rcu_replace_pointer() where appropriate to make code slimer.
Signed-off-by: Antonio Quartulli <a@unstable.cc>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
The commit 1a33e10e4a ("net: partially revert dynamic lockdep key
changes") reverts the commit ab92d68fc2 ("net: core: add generic lockdep
keys"). But it forgot to also revert the commit 5759af0682 ("batman-adv:
Drop lockdep.h include for soft-interface.c") which depends on the latter.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
This patch reverts the folowing commits:
commit 064ff66e2b
"bonding: add missing netdev_update_lockdep_key()"
commit 53d374979e
"net: avoid updating qdisc_xmit_lock_key in netdev_update_lockdep_key()"
commit 1f26c0d3d2
"net: fix kernel-doc warning in <linux/netdevice.h>"
commit ab92d68fc2
"net: core: add generic lockdep keys"
but keeps the addr_list_lock_key because we still lock
addr_list_lock nestedly on stack devices, unlikely xmit_lock
this is safe because we don't take addr_list_lock on any fast
path.
Reported-and-tested-by: syzbot+aaa6fa4949cc5d9b7b25@syzkaller.appspotmail.com
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There's no callers in-tree.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
batadv_v_ogm_process() invokes batadv_hardif_neigh_get(), which returns
a reference of the neighbor object to "hardif_neigh" with increased
refcount.
When batadv_v_ogm_process() returns, "hardif_neigh" becomes invalid, so
the refcount should be decreased to keep refcount balanced.
The reference counting issue happens in one exception handling paths of
batadv_v_ogm_process(). When batadv_v_ogm_orig_get() fails to get the
orig node and returns NULL, the refcnt increased by
batadv_hardif_neigh_get() is not decreased, causing a refcnt leak.
Fix this issue by jumping to "out" label when batadv_v_ogm_orig_get()
fails to get the orig node.
Fixes: 9323158ef9 ("batman-adv: OGMv2 - implement originators logic")
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
batadv_show_throughput_override() invokes batadv_hardif_get_by_netdev(),
which gets a batadv_hard_iface object from net_dev with increased refcnt
and its reference is assigned to a local pointer 'hard_iface'.
When batadv_store_throughput_override() returns, "hard_iface" becomes
invalid, so the refcount should be decreased to keep refcount balanced.
The issue happens in one error path of
batadv_store_throughput_override(). When batadv_parse_throughput()
returns NULL, the refcnt increased by batadv_hardif_get_by_netdev() is
not decreased, causing a refcnt leak.
Fix this issue by jumping to "out" label when batadv_parse_throughput()
returns NULL.
Fixes: 0b5ecc6811 ("batman-adv: add throughput override attribute to hard_ifaces")
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
batadv_show_throughput_override() invokes batadv_hardif_get_by_netdev(),
which gets a batadv_hard_iface object from net_dev with increased refcnt
and its reference is assigned to a local pointer 'hard_iface'.
When batadv_show_throughput_override() returns, "hard_iface" becomes
invalid, so the refcount should be decreased to keep refcount balanced.
The issue happens in the normal path of
batadv_show_throughput_override(), which forgets to decrease the refcnt
increased by batadv_hardif_get_by_netdev() before the function returns,
causing a refcnt leak.
Fix this issue by calling batadv_hardif_put() before the
batadv_show_throughput_override() returns in the normal path.
Fixes: 0b5ecc6811 ("batman-adv: add throughput override attribute to hard_ifaces")
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
and change to pseudorandom numbers, as this is a traffic dithering
operation that doesn't need crypto-grade.
The previous code operated in 4 steps:
1. Generate a random byte 0 <= rand_tq <= 255
2. Multiply it by BATADV_TQ_MAX_VALUE - tq
3. Divide by 255 (= BATADV_TQ_MAX_VALUE)
4. Return BATADV_TQ_MAX_VALUE - rand_tq
This would apperar to scale (BATADV_TQ_MAX_VALUE - tq) by a random
value between 0/255 and 255/255.
But! The intermediate value between steps 3 and 4 is stored in a u8
variable. So it's truncated, and most of the time, is less than 255, after
which the division produces 0. Specifically, if tq is odd, the product is
always even, and can never be 255. If tq is even, there's exactly one
random byte value that will produce a product byte of 255.
Thus, the return value is 255 (511/512 of the time) or 254 (1/512
of the time).
If we assume that the truncation is a bug, and the code is meant to scale
the input, a simpler way of looking at it is that it's returning a random
value between tq and BATADV_TQ_MAX_VALUE, inclusive.
Well, we have an optimized function for doing just that.
Fixes: 3c12de9a5c ("batman-adv: network coding - code and transmit packets if possible")
Signed-off-by: George Spelvin <lkml@sdf.org>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
The kernel provides a function to create random values from 0 - (max-1)
since commit f337db64af ("random32: add prandom_u32_max and convert open
coded users"). Simply use this function to replace code sections which use
prandom_u32 and a handcrafted method to map it to the correct range.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
The commit 04ae87a520 ("ftrace: Rework event_create_dir()") restructured
various macros in the ftrace framework. These changes also had the nice
side effect that the linux/types.h include is no longer necessary to define
some of the types used by these macros.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
checkpatch warns about a typo in the word bufFer which was introduced in
commit 2191c1bcbc64 ("batman-adv: kernel doc for types.h").
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Simon Wunderlich