Commit Graph

218 Commits

Author SHA1 Message Date
Grant Likely 08a543ad33 irq: add irq_domain translation infrastructure
This patch adds irq_domain infrastructure for translating from
hardware irq numbers to linux irqs.  This is particularly important
for architectures adding device tree support because the current
implementation (excluding PowerPC and SPARC) cannot handle
translation for more than a single interrupt controller.  irq_domain
supports device tree translation for any number of interrupt
controllers.

This patch converts x86, Microblaze, ARM and MIPS to use irq_domain
for device tree irq translation.  x86 is untested beyond compiling it,
irq_domain is enabled for MIPS and Microblaze, but the old behaviour is
preserved until the core code is modified to actually register an
irq_domain yet.  On ARM it works and is required for much of the new
ARM device tree board support.

PowerPC has /not/ been converted to use this new infrastructure.  It
is still missing some features before it can replace the virq
infrastructure already in powerpc (see documentation on
irq_domain_map/unmap for details).  Followup patches will add the
missing pieces and migrate PowerPC to use irq_domain.

SPARC has its own method of managing interrupts from the device tree
and is unaffected by this change.

Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-28 01:32:04 -06:00
Linus Torvalds c0c463d34a Merge branches 'x86-urgent-for-linus', 'core-debug-for-linus', 'irq-core-for-linus' and 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  um: Make rwsem.S depend on CONFIG_RWSEM_XCHGADD_ALGORITHM

* 'core-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  debug: Make CONFIG_EXPERT select CONFIG_DEBUG_KERNEL to unhide debug options

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  genirq: Remove unused CHECK_IRQ_PER_CPU()

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf tools, x86: Fix 32-bit compile on 64-bit system
2011-07-23 10:33:08 -07:00
Simon Guinot 659fb32d1b genirq: replace irq_gc_ack() with {set,clr}_bit variants (fwd)
This fixes a regression introduced by e59347a "arm: orion:
Use generic irq chip".

Depending on the device, interrupts acknowledgement is done by setting
or by clearing a dedicated register. Replace irq_gc_ack() with some
{set,clr}_bit variants allows to handle both cases.

Note that this patch affects the following SoCs: Davinci, Samsung and
Orion. Except for this last, the change is minor: irq_gc_ack() is just
renamed into irq_gc_ack_set_bit().

For the Orion SoCs, the edge GPIO interrupts support is currently
broken. irq_gc_ack() try to acknowledge a such interrupt by setting
the corresponding cause register bit. The Orion GPIO device expect the
opposite. To fix this issue, the irq_gc_ack_clr_bit() variant is used.

Tested on Network Space v2.

Reported-by: Joey Oravec <joravec@drewtech.com>
Signed-off-by: Simon Guinot <sguinot@lacie.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-07-07 16:02:26 +00:00
Thomas Gleixner a7de915383 genirq: Remove unused CHECK_IRQ_PER_CPU()
No more users. Kill it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-06-22 22:55:02 +02:00
Thomas Gleixner cfefd21e69 genirq: Add chip suspend and resume callbacks
These callbacks are only called in the syscore suspend/resume code on
interrupt chips which have been registered via the generic irq chip
mechanism. Calling those callbacks per irq would be rather icky, but
with the generic irq chip mechanism we can call this per registered
chip.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
2011-04-23 15:56:24 +02:00
Thomas Gleixner 7d82806247 genirq: Implement a generic interrupt chip
Implement a generic interrupt chip, which is configurable and is able
to handle the most common irq chip implementations.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Tested-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by; Kevin Hilman <khilman@ti.com>
2011-04-23 15:56:24 +02:00
Paul Mundt 7f1b1244e1 genirq: Support per-IRQ thread disabling.
This adds support for disabling threading on a per-IRQ basis via the IRQ
status instead of the IRQ flow, which is necessary for interrupts that
don't follow the natural IRQ flow channels, such as those that are
virtually created.

The new APIs added are simply:

	irq_set_thread()
	irq_set_nothread()

which follow the rest of the IRQ status routines.

Chained handlers also have IRQ_NOTHREAD set on them automatically, making
the lack of threading explicit rather than implicit. Subsequently, the
nothread flag can be viewed through the standard genirq debugging
facilities.

[ tglx: Fixed cleanup fallout ]

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Link: http://lkml.kernel.org/r/%3C20110406210135.GF18426%40linux-sh.org%3E
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-04-23 15:56:24 +02:00
Geert Uytterhoeven 0911f124bf genirq: Forgotten updates/deletions after removal of compat code
commit 0c6f8a8b91 ("genirq: Remove compat code")
removed the compat code, but forgot to update some references in comments and
delete some of its documentation.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: http://lkml.kernel.org/r/%3C1302426113-13808-1-git-send-email-geert%40linux-m68k.org%3E
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-04-23 15:56:23 +02:00
Thomas Gleixner 28959f268f genirq: Remove obsolete comment
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-30 00:37:41 +02:00
Thomas Gleixner 851d7cf647 genirq: Remove move_*irq leftovers
All users converted to new interface.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29 14:50:32 +02:00
Thomas Gleixner 0c6f8a8b91 genirq: Remove compat code
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29 14:48:19 +02:00
Randy Dunlap 30398bf6c6 genirq: Fix new kernel-doc warnings
Fix new irq-related kernel-doc warnings in 2.6.38:

Warning(kernel/irq/manage.c:149): No description found for parameter 'mask'
Warning(kernel/irq/manage.c:149): Excess function parameter 'cpumask' description in 'irq_set_affinity'
Warning(include/linux/irq.h:161): No description found for parameter 'state_use_accessors'
Warning(include/linux/irq.h:161): Excess struct/union/enum/typedef member 'state_use_accessor' description in 'irq_data'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
LKML-Reference: <20110318093356.b939558d.randy.dunlap@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-28 20:13:57 +02:00
Thomas Gleixner ee38c04b58 genirq: Add setter for AFFINITY_SET in irq_data state
Some archs want to prevent the default affinity being set on their
chips in the reqeust_irq() path.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-28 17:31:40 +02:00
Thomas Gleixner 9cff60dfc3 genirq: Provide setter inline for IRQD_IRQ_INPROGRESS
Special function for demultiplexing handlers which can be disabled via
disable_irq().

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-28 16:55:12 +02:00
Thomas Gleixner 33b054b867 genirq: Remove handle_IRQ_event
Last user gone.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-28 16:55:11 +02:00
Thomas Gleixner 0521c8fbb3 genirq: Provide edge_eoi flow handler
This is a replacment for the cell flow handler which is in the way of
cleanups. Must be selected to avoid general bloat.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-28 16:55:11 +02:00
Thomas Gleixner 32f4125ebf genirq: Move INPROGRESS, MASKED and DISABLED state flags to irq_data
We really need these flags for some of the interrupt chips. Move it
from internal state to irq_data and provide proper accessors.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David Daney <ddaney@caviumnetworks.com>
2011-03-28 16:55:10 +02:00
David Daney c2d0c555c2 genirq: Split irq_set_affinity() so it can be called with lock held.
The .irq_cpu_online() and .irq_cpu_offline() functions may need to
adjust affinity, but they are called with the descriptor lock held.
Create __irq_set_affinity_locked() which is called with the lock held.
Make irq_set_affinity() just a wrapper that acquires the lock.

[ tglx: Changed the argument to irq_data, added a !desc check and
        moved the !irq_set_affinity check where it belongs ]

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: linux-mips@linux-mips.org
Cc: ralf@linux-mips.org
LKML-Reference: <1301081931-11240-4-git-send-email-ddaney@caviumnetworks.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-27 17:45:59 +02:00
Thomas Gleixner b3d422329f genirq: Add chip flag for restricting cpu_on/offline calls
Add a flag which indicates that the on/offline callback should only be
called on enabled interrupts.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-27 17:45:58 +02:00
David Daney 0fdb4b259e genirq: Add chip hooks for taking CPUs on/off line.
[ tglx: Removed the enabled argument as this is now available in
irq_data ]

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: linux-mips@linux-mips.org
Cc: ralf@linux-mips.org
LKML-Reference: <1301081931-11240-3-git-send-email-ddaney@caviumnetworks.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-27 17:45:58 +02:00
Thomas Gleixner 801a0e9ae3 genirq: Add irq disabled flag to irq_data state
Some irq_chip implementation require to know the disabled state of the
interrupt in certain callbacks. Add a state flag and accessor to
irq_data.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-27 17:45:58 +02:00
Thomas Gleixner ab7798ffcf genirq: Expand generic show_interrupts()
Some archs want to print extra information for certain irq_chips which
is per irq and not per chip. Allow them to provide a chip callback to
print the chip name and the extra information.

PowerPC wants to print the LEVEL/EDGE type information. Make it configurable.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-25 17:04:20 +01:00
Thomas Gleixner d209a699a0 genirq: Add chip flag to force mask on suspend
On suspend we disable all interrupts in the core code, but this does
not mask the interrupt line in the default implementation as we use a
lazy disable approach. That means we mark the interrupt disabled, but
leave the hardware unmasked. That's an optimization because we avoid
the hardware access for the common case where no interrupt happens
after we marked it disabled. If an interrupt happens, then the
interrupt flow handler masks the line at the hardware level and marks
it pending.

Suspend makes use of this delayed disable as it "disables" all
interrupts when preparing the suspend transition. Right before the
system goes into hardware suspend state it checks whether one of the
interrupts which is marked as a wakeup interrupt came in after
disabling it.

Most interrupt chips have a separate register which selects the
interrupts which can wake up the system from suspend, so we don't have
to mask any on the non wakeup interrupts.

But now we have to deal with brilliant designed hardware which lacks
such a wakeup configuration facility. For such hardware it's necessary
to mask all non wakeup interrupts before going into suspend in order
to avoid the wakeup from random interrupts.

Rather than working around this in the affected interrupt chip
implementations we can solve this elegant in the core code itself.

Add a flag IRQCHIP_MASK_ON_SUSPEND which can be set by the irq chip
implementation to indicate, that the interrupts which are not selected
as wakeup sources must be masked in the suspend path. Mask them in the
loop which checks the wakeup interrupts pending flag.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
LKML-Reference: <alpine.LFD.2.00.1103112112310.2787@localhost6.localdomain6>
2011-03-12 11:12:58 +01:00
Thomas Gleixner a439520f8b genirq: Implement irq_data based move_*_irq() versions
No need to lookup the irq descriptor when calling from a chip callback
function which has irq_data already handy.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19 12:58:25 +01:00
Thomas Gleixner 77694b408a genirq; Add fasteoi irq_chip quirk
Some chips want irq_eoi() only called when an interrupt is actually
handled. So they have checks for INPROGRESS and DISABLED in their
irq_eoi callbacks. Add a chip flag, which allows to handle that in the
generic code. No impact on the fastpath.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19 12:58:24 +01:00
Thomas Gleixner 781295762d genirq: Add preflow handler support
sparc64 needs to call a preflow handler on certain interrupts befor
calling the action chain. Integrate it into handle_fasteoi_irq. Must
be enabled via CONFIG_IRQ_FASTEOI_PREFLOW. No impact when disabled.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David S. Miller <davem@davemloft.net>
2011-02-19 12:58:24 +01:00
Thomas Gleixner 3836ca08aa genirq: Consolidate set_chip_handler functions
No need to have separate functions if we have one plus inline wrappers.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19 12:58:23 +01:00
Thomas Gleixner e1ef824146 genirq: Reflect IRQ_MOVE_PCNTXT in irq_data state
Required by x86.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19 12:58:22 +01:00
Thomas Gleixner 7f94226f03 genirq: Move wakeup state to irq_data
Some irq_chips need to know the state of wakeup mode for
setting the trigger type etc. Reflect it in irq_data state.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19 12:58:22 +01:00
Thomas Gleixner d4d5e08960 genirq: Add IRQCHIP_SET_TYPE_MASKED flag
irq_chips, which require to mask the chip before changing the trigger
type should set this flag. So the core takes care of it and the
requirement for looking into desc->status in the chip goes away.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Walleij <linus.walleij@stericsson.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
2011-02-19 12:58:22 +01:00
Thomas Gleixner 2bff17ad21 genirq: Add flags to irq_chip
Looking through irq_chip implementations I noticed that some of them
have special requirements, like setting the type masked and therefor
fiddle in irq_desc->status. Add a flag field, so the core code can
handle it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19 12:58:21 +01:00
Thomas Gleixner 5d4d8fc9ac genirq: Cleanup irq.h
Put the constants into an enum and document them.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19 12:58:21 +01:00
Thomas Gleixner 876dbd4cc1 genirq: Mirror irq trigger type bits in irq_data.state
That's the data structure chip functions get provided. Also allow them
to signal the core code that they updated the flags in irq_data.state
by returning IRQ_SET_MASK_OK_NOCOPY. The default is unchanged.

The type bits should be accessed via:

val = irqd_get_trigger_type(irqdata);
and
irqd_set_trigger_type(irqdata, val);

Coders who access them directly will be tracked down and slapped with
stinking trouts.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19 12:58:20 +01:00
Thomas Gleixner 2bdd10558c genirq: Move IRQ_AFFINITY_SET to core
Keep status in sync until last abuser is gone.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19 12:58:20 +01:00
Thomas Gleixner a005677b3d genirq: Mirror IRQ_PER_CPU and IRQ_NO_BALANCING in irq_data.state
That's the right data structure to look at for arch code.

Accessor functions are provided.

	 irqd_is_per_cpu(irqdata);
	 irqd_can_balance(irqdata);

Coders who access them directly will be tracked down and slapped with
stinking trouts.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19 12:58:20 +01:00
Thomas Gleixner 8f53f92404 genirq: Make CHECK_IRQ_PER_CPU an inline and deprecate it
Its' too ugly and needs to go. The only users are core code and
parisc. Core code does not need it and parisc gets a new check once
IRQ_PER_CPU is reflected in irq_data.state.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19 12:58:19 +01:00
Thomas Gleixner 6a58fb3bad genirq: Remove CONFIG_IRQ_PER_CPU
The saving of this switch is minimal versus the ifdef mess it
creates. Simple enable PER_CPU unconditionally and remove the config
switch.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19 12:58:19 +01:00
Thomas Gleixner f230b6d5c4 genirq: Add IRQ_MOVE_PENDING to irq_data.state
chip implementations need to know about it. Keep status in sync until
all users are fixed. 

Accessor function: irqd_is_setaffinity_pending(irqdata)

Coders who access them directly will be tracked down and slapped with
stinking trouts.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19 12:58:18 +01:00
Thomas Gleixner 91c4991781 genirq: Add state field to irq_data
Some chip implementations need to access certain status flags. With
sparse irqs that requires a lookup of the irq descriptor. Add a state
field which contains such flags.

Name it in a way which will make coders happy to access it with the
proper accessor functions. And it's easy to grep for.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19 12:58:18 +01:00
Thomas Gleixner c531e8361f genirq: Move IRQ_SUSPENDED to core
No users outside of core.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19 12:58:18 +01:00
Thomas Gleixner 6e40262ea4 genirq: Move IRQ_MASKED to core
Keep status in sync until all users are fixed.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19 12:58:17 +01:00
Thomas Gleixner 2a0d6fb335 genirq: Move IRQ_PENDING flag to core
Keep status in sync until all users are fixed.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19 12:58:17 +01:00
Thomas Gleixner c1594b77e4 genirq: Move IRQ_DISABLED to core
Keep status in sync until all abusers are fixed.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19 12:58:17 +01:00
Thomas Gleixner 163ef30911 genirq: Move IRQ_REPLAY and IRQ_WAITING to core
No users outside of core.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19 12:58:16 +01:00
Thomas Gleixner 3d67baec7f genirq: Move IRQ_ONESHOT to core
No users outside of core.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19 12:58:16 +01:00
Thomas Gleixner 009b4c3b8a genirq: Add IRQ_INPROGRESS to core
We need to maintain the flag for now in both fields status and istate.
Add a CONFIG_GENERIC_HARDIRQS_NO_COMPAT switch to allow testing w/o
the status one. Wrap the access to status IRQ_INPROGRESS in a inline
which can be turned of with CONFIG_GENERIC_HARDIRQS_NO_COMPAT along
with the define.

There is no reason that anything outside of core looks at this. That
needs some modifications, but we'll get there.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19 12:58:16 +01:00
Thomas Gleixner 6954b75b48 genirq: Move IRQ_POLL_INPROGRESS to core
No users outside of core.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19 12:58:15 +01:00
Thomas Gleixner 6f91a52d9b genirq: Use modify_status for set_irq_nested_thread
No need for a separate function in the core code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19 12:58:15 +01:00
Thomas Gleixner 7acdd53e5b genirq: Move IRQ_SPURIOUS_DISABLED to core state
No users outside.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19 12:58:15 +01:00
Thomas Gleixner bd062e7667 genirq: Move IRQ_AUTODETECT to internal state
No users outside of core

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19 12:58:15 +01:00