Here are a number of small tty core and serial driver fixes for 5.0-rc4
to resolve some reported issues.
Nothing major, the small serial driver fixes, a tty core fixup for a
crash that was reported, and some good vt fixes from Nicolas Pitre as he
seems to be auditing that chunk of code a lot lately.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXEr9zw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylgaQCcCpv3UHszx+ZemlyPUB3ZGEa1l48AoLd3VB46
cRO5Cf78Dr/FO73bWjLR
=zjYg
-----END PGP SIGNATURE-----
Merge tag 'tty-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are a number of small tty core and serial driver fixes for
5.0-rc4 to resolve some reported issues.
Nothing major, the small serial driver fixes, a tty core fixup for a
crash that was reported, and some good vt fixes from Nicolas Pitre as
he seems to be auditing that chunk of code a lot lately.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: fsl_lpuart: fix maximum acceptable baud rate with over-sampling
tty: serial: qcom_geni_serial: Allow mctrl when flow control is disabled
tty: Handle problem if line discipline does not have receive_buf
vgacon: unconfuse vc_origin when using soft scrollback
vt: invoke notifier on screen size change
vt: always call notifier with the console lock held
vt: make vt_console_print() compatible with the unicode screen buffer
tty/n_hdlc: fix __might_sleep warning
serial: 8250: Fix serial8250 initialization crash
uart: Fix crash in uart_write and uart_put_char
When CONFIG_VGACON_SOFT_SCROLLBACK is selected, the VGA display memory
index and vc_visible_origin don't change when scrollback is activated.
The actual screen content is saved away and the scrollbackdata is copied
over it. However the vt code, and /dev/vcs devices in particular, still
expect vc_origin to always point at the actual screen content not the
displayed scrollback content.
So adjust vc_origin to point at the saved screen content when scrollback
is active and set it back to vc_visible_origin when restoring the screen.
This fixes /dev/vcsa<n> that return scrollback content when they
shouldn't (onli /dev/vcsa without a number should), and also fixes
/dev/vcsu that should return scrollback content when scrollback is
active but currently doesn't.
An unnecessary call to vga_set_mem_top() is also removed.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A command line option is much more flexible than a config option and
the supporting code is small. Gets rid of #ifdefs in the code too...
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Commit 5c63e407aa ("fbdev: Convert to using %pOFn instead of
device_node.name") changed how the OF FB driver handles the OF node
name. This missed the case where the node name is passed to
offb_init_palette_hacks(). This results in a NULL ptr dereference
in strncmp and breaks any system except ones using bootx with no display
node.
Fix this by making offb_init_palette_hacks() use the OF node pointer and
use of_node_name_prefix() helper function instead for node name
comparisons. This helps in moving all OF node name accesses to helper
functions in preparation to remove struct device_node.name pointer.
Fixes: 5c63e407aa ("fbdev: Convert to using %pOFn instead of device_node.name")
Reported-by: Mathieu Malaterre <malat@debian.org>
Tested-by: Mathieu Malaterre <malat@debian.org>
Cc: stable@vger.kernel.org # v4.19+
Cc: Elimar Riesebieter <riesebie@lxtec.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Using [1] for static analysis I found that the OMAPFB_QUERY_PLANE,
OMAPFB_GET_COLOR_KEY, OMAPFB_GET_DISPLAY_INFO, and OMAPFB_GET_VRAM_INFO
cases could all leak uninitialized stack memory--either due to
uninitialized padding or 'reserved' fields.
Fix them by clearing the shared union used to store copied out data.
[1] https://github.com/vlad902/kernel-uninitialized-memory-checker
Signed-off-by: Vlad Tsyrklevich <vlad@tsyrklevich.net>
Reviewed-by: Kees Cook <keescook@chromium.org>
Fixes: b39a982dde ("OMAP: DSS2: omapfb driver")
Cc: security@kernel.org
[b.zolnierkie: prefix patch subject with "omap2fb: "]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
We already need to zero out memory for dma_alloc_coherent(), as such
using dma_zalloc_coherent() is superflous. Phase it out.
This change was generated with the following Coccinelle SmPL patch:
@ replace_dma_zalloc_coherent @
expression dev, size, data, handle, flags;
@@
-dma_zalloc_coherent(dev, size, handle, flags)
+dma_alloc_coherent(dev, size, handle, flags)
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
[hch: re-ran the script on the latest tree]
Signed-off-by: Christoph Hellwig <hch@lst.de>
- fix fbcon to not cause crash on unregister_framebuffer()
when there is more than one framebuffer (Noralf Trønnes)
- improve support for small rotated displays (Peter Rosin)
- fix probe failure handling in udlfb driver (Dan Carpenter)
- add config option to center the bootup logo (Peter Rosin)
- make FB_BACKLIGHT config option tristate (Rob Clark)
- remove superfluous HAS_DMA dependency for goldfishfb driver
(Geert Uytterhoeven)
- misc fixes (Alexey Khoroshilov, YueHaibing, Colin Ian King,
Lubomir Rintel)
- misc cleanups (Yangtao Li, Wen Yang)
also there is DRM's nouveau driver fix for wrong FB_BACKLIGHT
config option usage (FB_BACKLIGHT is for internal fbdev
subsystem use only)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=rd5j
-----END PGP SIGNATURE-----
Merge tag 'fbdev-v4.21' of git://github.com/bzolnier/linux
Pull fbdev updates from Bartlomiej Zolnierkiewicz:
"This time the pull request is really small.
The most notable changes are fixing fbcon to not cause crash on
unregister_framebuffer() operation when there is more than one
framebuffer, adding config option to center the bootup logo and making
FB_BACKLIGHT config option tristate (which in turn uncovered incorrect
FB_BACKLIGHT usage by DRM's nouveau driver).
Summary:
- fix fbcon to not cause crash on unregister_framebuffer() when there
is more than one framebuffer (Noralf Trønnes)
- improve support for small rotated displays (Peter Rosin)
- fix probe failure handling in udlfb driver (Dan Carpenter)
- add config option to center the bootup logo (Peter Rosin)
- make FB_BACKLIGHT config option tristate (Rob Clark)
- remove superfluous HAS_DMA dependency for goldfishfb driver (Geert
Uytterhoeven)
- misc fixes (Alexey Khoroshilov, YueHaibing, Colin Ian King, Lubomir
Rintel)
- misc cleanups (Yangtao Li, Wen Yang)
also there is DRM's nouveau driver fix for wrong FB_BACKLIGHT config
option usage (FB_BACKLIGHT is for internal fbdev subsystem use only)"
* tag 'fbdev-v4.21' of git://github.com/bzolnier/linux:
drm/nouveau: fix incorrect FB_BACKLIGHT usage in Kconfig
fbdev: fbcon: Fix unregister crash when more than one framebuffer
fbdev: Remove depends on HAS_DMA in case of platform dependency
pxa168fb: trivial typo fix
fbdev: fsl-diu: remove redundant null check on cmap
fbdev: omap2: omapfb: convert to DEFINE_SHOW_ATTRIBUTE
fbdev: uvesafb: fix spelling mistake "memoery" -> "memory"
fbdev: fbmem: add config option to center the bootup logo
fbdev: fbmem: make fb_show_logo_line return the end instead of the height
video: fbdev: pxafb: Fix "WARNING: invalid free of devm_ allocated data"
fbdev: fbmem: behave better with small rotated displays and many CPUs
video: clps711x-fb: release disp device node in probe()
fbdev: make FB_BACKLIGHT a tristate
udlfb: fix some inconsistent NULL checking
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument
of the user address range verification function since we got rid of the
old racy i386-only code to walk page tables by hand.
It existed because the original 80386 would not honor the write protect
bit when in kernel mode, so you had to do COW by hand before doing any
user access. But we haven't supported that in a long time, and these
days the 'type' argument is a purely historical artifact.
A discussion about extending 'user_access_begin()' to do the range
checking resulted this patch, because there is no way we're going to
move the old VERIFY_xyz interface to that model. And it's best done at
the end of the merge window when I've done most of my merges, so let's
just get this done once and for all.
This patch was mostly done with a sed-script, with manual fix-ups for
the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form.
There were a couple of notable cases:
- csky still had the old "verify_area()" name as an alias.
- the iter_iov code had magical hardcoded knowledge of the actual
values of VERIFY_{READ,WRITE} (not that they mattered, since nothing
really used it)
- microblaze used the type argument for a debug printout
but other than those oddities this should be a total no-op patch.
I tried to fix up all architectures, did fairly extensive grepping for
access_ok() uses, and the changes are trivial, but I may have missed
something. Any missed conversion should be trivially fixable, though.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull Devicetree updates from Rob Herring:
"The biggest highlight here is the start of using json-schema for DT
bindings. Being able to validate bindings has been discussed for years
with little progress.
- Initial support for DT bindings using json-schema language. This is
the start of converting DT bindings from free-form text to a
structured format.
- Reworking of initrd address initialization. This moves to using the
phys address instead of virt addr in the DT parsing code. This
rework was motivated by CONFIG_DEV_BLK_INITRD causing unnecessary
rebuilding of lots of files.
- Fix stale phandle entries in phandle cache
- DT overlay validation improvements. This exposed several memory
leak bugs which have been fixed.
- Use node name and device_type helper functions in DT code
- Last remaining conversions to using %pOFn printk specifier instead
of device_node.name directly
- Create new common RTC binding doc and move all trivial RTC devices
out of trivial-devices.txt.
- New bindings for Freescale MAG3110 magnetometer, Cadence Sierra
PHY, and Xen shared memory
- Update dtc to upstream version v1.4.7-57-gf267e674d145"
* tag 'devicetree-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (68 commits)
of: __of_detach_node() - remove node from phandle cache
of: of_node_get()/of_node_put() nodes held in phandle cache
gpio-omap.txt: add reg and interrupts properties
dt-bindings: mrvl,intc: fix a trivial typo
dt-bindings: iio: magnetometer: add dt-bindings for freescale mag3110
dt-bindings: Convert trivial-devices.txt to json-schema
dt-bindings: arm: mrvl: amend Browstone compatible string
dt-bindings: arm: Convert Tegra board/soc bindings to json-schema
dt-bindings: arm: Convert ZTE board/soc bindings to json-schema
dt-bindings: arm: Add missing Xilinx boards
dt-bindings: arm: Convert Xilinx board/soc bindings to json-schema
dt-bindings: arm: Convert VIA board/soc bindings to json-schema
dt-bindings: arm: Convert ST STi board/soc bindings to json-schema
dt-bindings: arm: Convert SPEAr board/soc bindings to json-schema
dt-bindings: arm: Convert CSR SiRF board/soc bindings to json-schema
dt-bindings: arm: Convert QCom board/soc bindings to json-schema
dt-bindings: arm: Convert TI nspire board/soc bindings to json-schema
dt-bindings: arm: Convert TI davinci board/soc bindings to json-schema
dt-bindings: arm: Convert Calxeda board/soc bindings to json-schema
dt-bindings: arm: Convert Altera board/soc bindings to json-schema
...
When unregistering fbdev using unregister_framebuffer(), any bound
console will unbind automatically. This is working fine if this is the
only framebuffer, resulting in a switch to the dummy console. However if
there is a fb0 and I unregister fb1 having a bound console, I eventually
get a crash. The fastest way for me to trigger the crash is to do a
reboot, resulting in this splat:
[ 76.478825] WARNING: CPU: 0 PID: 527 at linux/kernel/workqueue.c:1442 __queue_work+0x2d4/0x41c
[ 76.478849] Modules linked in: raspberrypi_hwmon gpio_backlight backlight bcm2835_rng rng_core [last unloaded: tinydrm]
[ 76.478916] CPU: 0 PID: 527 Comm: systemd-udevd Not tainted 4.20.0-rc4+ #4
[ 76.478933] Hardware name: BCM2835
[ 76.478949] Backtrace:
[ 76.478995] [<c010d388>] (dump_backtrace) from [<c010d670>] (show_stack+0x20/0x24)
[ 76.479022] r6:00000000 r5:c0bc73be r4:00000000 r3:6fb5bf81
[ 76.479060] [<c010d650>] (show_stack) from [<c08e82f4>] (dump_stack+0x20/0x28)
[ 76.479102] [<c08e82d4>] (dump_stack) from [<c0120070>] (__warn+0xec/0x12c)
[ 76.479134] [<c011ff84>] (__warn) from [<c01201e4>] (warn_slowpath_null+0x4c/0x58)
[ 76.479165] r9:c0eb6944 r8:00000001 r7:c0e927f8 r6:c0bc73be r5:000005a2 r4:c0139e84
[ 76.479197] [<c0120198>] (warn_slowpath_null) from [<c0139e84>] (__queue_work+0x2d4/0x41c)
[ 76.479222] r6:d7666a00 r5:c0e918ee r4:dbc4e700
[ 76.479251] [<c0139bb0>] (__queue_work) from [<c013a02c>] (queue_work_on+0x60/0x88)
[ 76.479281] r10:c0496bf8 r9:00000100 r8:c0e92ae0 r7:00000001 r6:d9403700 r5:d7666a00
[ 76.479298] r4:20000113
[ 76.479348] [<c0139fcc>] (queue_work_on) from [<c0496c28>] (cursor_timer_handler+0x30/0x54)
[ 76.479374] r7:d8a8fabc r6:c0e08088 r5:d8afdc5c r4:d8a8fabc
[ 76.479413] [<c0496bf8>] (cursor_timer_handler) from [<c0178744>] (call_timer_fn+0x100/0x230)
[ 76.479435] r4:c0e9192f r3:d758a340
[ 76.479465] [<c0178644>] (call_timer_fn) from [<c0178980>] (expire_timers+0x10c/0x12c)
[ 76.479495] r10:40000000 r9:c0e9192f r8:c0e92ae0 r7:d8afdccc r6:c0e19280 r5:c0496bf8
[ 76.479513] r4:d8a8fabc
[ 76.479541] [<c0178874>] (expire_timers) from [<c0179630>] (run_timer_softirq+0xa8/0x184)
[ 76.479570] r9:00000001 r8:c0e19280 r7:00000000 r6:c0e08088 r5:c0e1a3e0 r4:c0e19280
[ 76.479603] [<c0179588>] (run_timer_softirq) from [<c0102404>] (__do_softirq+0x1ac/0x3fc)
[ 76.479632] r10:c0e91680 r9:d8afc020 r8:0000000a r7:00000100 r6:00000001 r5:00000002
[ 76.479650] r4:c0eb65ec
[ 76.479686] [<c0102258>] (__do_softirq) from [<c0124d10>] (irq_exit+0xe8/0x168)
[ 76.479716] r10:d8d1a9b0 r9:d8afc000 r8:00000001 r7:d949c000 r6:00000000 r5:c0e8b3f0
[ 76.479734] r4:00000000
[ 76.479764] [<c0124c28>] (irq_exit) from [<c016b72c>] (__handle_domain_irq+0x94/0xb0)
[ 76.479793] [<c016b698>] (__handle_domain_irq) from [<c01021dc>] (bcm2835_handle_irq+0x3c/0x48)
[ 76.479823] r8:d8afdebc r7:d8afddfc r6:ffffffff r5:c0e089f8 r4:d8afddc8 r3:d8afddc8
[ 76.479851] [<c01021a0>] (bcm2835_handle_irq) from [<c01019f0>] (__irq_svc+0x70/0x98)
The problem is in the console rebinding in fbcon_fb_unbind(). It uses the
virtual console index as the new framebuffer index to bind the console(s)
to. The correct way is to use the con2fb_map lookup table to find the
framebuffer index.
Fixes: cfafca8067 ("fbdev: fbcon: console unregistration from unregister_framebuffer")
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Remove dependencies on HAS_DMA where a Kconfig symbol depends on another
symbol that implies HAS_DMA, and, optionally, on "|| COMPILE_TEST".
In most cases this other symbol is an architecture or platform specific
symbol, or PCI.
Generic symbols and drivers without platform dependencies keep their
dependencies on HAS_DMA, to prevent compiling subsystems or drivers that
cannot work anyway.
This simplifies the dependencies, and allows to improve compile-testing.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
A missing space in an error message.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Cc: Jiri Kosina <trivial@kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
The null check on &info->cmap is redundant since cmap is a struct
inside fb_info and can never be null, so the check is always true.
We may remove it.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Acked-by: Timur Tabi <timur@kernel.org>
Cc: zhong.weidong@zte.com.cn
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
There is a spelling mistake in the module parameter description, fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: Michal Januszewski <spock@gentoo.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
If there are extra logos (CONFIG_FB_LOGO_EXTRA) the heights of these
extra logos are not considered when centering the first logo vertically.
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
In preparation for allowing centering of the bootup logo, make
fb_show_logo_line return where the next free framebuffer line is,
instead of returning the height of the shown logo.
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Blitting an image with "negative" offsets is not working since there
is no clipping. It hopefully just crashes. For the bootup logo, there
is protection so that blitting does not happen as the image is drawn
further and further to the right (ROTATE_UR) or further and further
down (ROTATE_CW). There is however no protection when drawing in the
opposite directions (ROTATE_UD and ROTATE_CCW).
Add back this protection.
The regression is 20-odd years old but the mindless warning-killing
mentality displayed in commit 34bdb666f4 ("fbdev: fbmem: remove
positive test on unsigned values") is also to blame, methinks.
Fixes: 448d479747 ("fbdev: fb_do_show_logo() updates")
Signed-off-by: Peter Rosin <peda@axentia.se>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Fabian Frederick <ffrederick@users.sourceforge.net>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
cc: Geoff Levand <geoff@infradead.org>
Cc: James Simmons <jsimmons@users.sf.net>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
clps711x_fb_probe() increments refcnt of disp device node by
of_parse_phandle() and leaves it undecremented on both
successful and error paths.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Cc: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
BACKLIGHT_CLASS_DEVICE is already tristate, but a dependency
FB_BACKLIGHT prevents it from being built as a module. There
doesn't seem to be any particularly good reason for this, so
switch FB_BACKLIGHT over to tristate.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ulf Magnusson <ulfalizer@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Hans de Goede <j.w.r.degoede@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
In the current kernel, then kzalloc() can't fail for small allocations,
but if it did fail then we would have a NULL dereference in the error
handling. Also in dlfb_usb_disconnect() if "info" were NULL then it
would cause an Oops inside the unregister_framebuffer() function but it
can't be NULL so let's remove that check.
Fixes: 68a958a915 ("udlfb: handle unplug properly")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Bernie Thompson <bernie@plugable.com>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Alexey Khoroshilov <khoroshilov@ispras.ru>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Wen Yang <wen.yang99@zte.com.cn>
[b.zolnierkie: added "Fixes:" tag]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Convert string compares of DT node names to use of_node_name_eq helper
instead. This removes direct access to the node name pointer.
For instances using of_node_cmp, this has the side effect of now using
case sensitive comparisons. This should not matter for any FDT based
system which this is.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Commit '88ba95bedb79 ("backlight: pwm_bl: Compute brightness of LED
linearly to human eye")' allows the possibility to compute a default
brightness table when there isn't the brightness-levels property in the
DT. Unfortunately the changes made broke the pwm backlight for the
non-DT boards.
Usually, the non-DT boards don't pass the brightness levels via platform
data, instead, it sets the max_brightness in their platform data and the
driver calculates the level without a table. The offending patch assumed
that when there is no brightness levels table we should create one, but this
is clearly wrong for the non-DT case.
After this patch the code handles the DT and the non-DT case taking in
consideration also if max_brightness is set or not.
Fixes: 88ba95bedb ("backlight: pwm_bl: Compute brightness of LED linearly to human eye")
Reported-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
In preparation to remove the node name pointer from struct device_node,
convert printf users to use the %pOFn format specifier.
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-fbdev@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Commit 88ba95bedb ("backlight: pwm_bl: Compute brightness of LED linearly
to human eye") made the parse-dt function return early when using an auto-
generated brightness-table, but didn't take into account that some more
settings were handled below the brightness handling, like power-on-delays
and also setting the pdata enable-gpio to -EINVAL.
This surfaces for example in the case of a backlight without any
enable-gpio which then tries to use gpio-0 in error.
Fix this by simply moving the trailing settings above the brightness
handling.
Fixes: 88ba95bedb ("backlight: pwm_bl: Compute brightness of LED linearly to human eye")
Signed-off-by: Heiko Stuebner <heiko.stuebner@bq.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Commit e6bcca0890 ("backlight: pwm_bl: Switch to using "atomic" PWM API")
removed the driver internal enabled tracking in favor of simply checking
the pwm state.
This can lead to issues as all of gpio-, regulator- and pwm-state are used
to determine the initial state and the bootloader or kernel can leave them
in an inconsistent state at boot.
In my case on rk3399-kevin, the pwm backlight is build as module and the
kernel disables the supply regulator as unused while keeping the pwm running
thus pwm_bl calling pwm_backlight_power_off() during probe and creating an
unmatched regulator-disable call, as it never got enabled from the pwm-bl
before.
To prevent these consistency issues, reintroduce the driver-internal
tracking of the enabled state.
Fixes: e6bcca0890 ("backlight: pwm_bl: Switch to using "atomic" PWM API")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
UAPI Changes:
- Add syncobj timeline support to drm.
Cross-subsystem Changes:
- Remove shared fence staging in dma-buf's fence object, and allow
reserving more than 1 fence and add more paranoia when debugging.
- Constify infoframe functions in video/hdmi.
Core Changes:
- Add vkms todo, and a lot of assorted doc fixes.
- Drop transitional helpers and convert drivers to use drm_atomic_helper_shutdown().
- Move atomic state helper functions to drm_atomic_state_helper.[ch]
- Refactor drm selftests, and add new tests.
- DP MST atomic state cleanups.
- Drop EXPORT_SYMBOL from drm leases.
- Lease cleanups and fixes.
- Create render node for vgem.
Driver Changes:
- Fix build failure in imx without fbdev emulation.
- Add rotation quirk for GPD win2 panel.
- Add support for various CDTech panels, Banana Pi Panel, DLC1010GIG,
Olimex LCD-O-LinuXino, Samsung S6D16D0, Truly NT35597 WQXGA,
Himax HX8357D, simulated RTSM AEMv8.
- Add dw_hdmi support to rockchip driver.
- Fix YUV support in vc4.
- Fix resource id handling in virtio.
- Make rockchip use dw-mipi-dsi bridge driver, and add dual dsi support.
- Advertise that tinydrm only supports DRM_FORMAT_MOD_LINEAR.
- Convert many drivers to use atomic helpers, and drm_fbdev_generic_setup().
- Add Mali linear tiled formats, and enable them in the Mali-DP driver.
- Add support for H6 DE3 mixer 0, DW HDMI, HDMI PHY and TCON TOP.
- Assorted driver cleanups and fixes.
-----BEGIN PGP SIGNATURE-----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=UV0m
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2018-11-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v4.21, part 1:
UAPI Changes:
- Add syncobj timeline support to drm.
Cross-subsystem Changes:
- Remove shared fence staging in dma-buf's fence object, and allow
reserving more than 1 fence and add more paranoia when debugging.
- Constify infoframe functions in video/hdmi.
Core Changes:
- Add vkms todo, and a lot of assorted doc fixes.
- Drop transitional helpers and convert drivers to use drm_atomic_helper_shutdown().
- Move atomic state helper functions to drm_atomic_state_helper.[ch]
- Refactor drm selftests, and add new tests.
- DP MST atomic state cleanups.
- Drop EXPORT_SYMBOL from drm leases.
- Lease cleanups and fixes.
- Create render node for vgem.
Driver Changes:
- Fix build failure in imx without fbdev emulation.
- Add rotation quirk for GPD win2 panel.
- Add support for various CDTech panels, Banana Pi Panel, DLC1010GIG,
Olimex LCD-O-LinuXino, Samsung S6D16D0, Truly NT35597 WQXGA,
Himax HX8357D, simulated RTSM AEMv8.
- Add dw_hdmi support to rockchip driver.
- Fix YUV support in vc4.
- Fix resource id handling in virtio.
- Make rockchip use dw-mipi-dsi bridge driver, and add dual dsi support.
- Advertise that tinydrm only supports DRM_FORMAT_MOD_LINEAR.
- Convert many drivers to use atomic helpers, and drm_fbdev_generic_setup().
- Add Mali linear tiled formats, and enable them in the Mali-DP driver.
- Add support for H6 DE3 mixer 0, DW HDMI, HDMI PHY and TCON TOP.
- Assorted driver cleanups and fixes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/be7ebd91-edd9-8fa4-4286-1c57e3165113@linux.intel.com
- update atyfb driver - improvements for ATI Mach64 chips: detect
the dot clock divider correctly on Sparc, fix display corruptions
(due to endianness issues and improper reading of accelerator
registers), optimize scrolling performance and also fix debugging
printks (Mikulas Patocka)
- rewrite USB unplug handling in udlfb driver using framebuffer
subsystem reference counting (Mikulas Patocka)
- fix support for native-mode display-timings in atmel_lcdfb driver
(Sam Ravnborg)
- fix information leak & add missing access_ok() checks in sbuslib
(Dan Carpenter)
- allow using GPIO expanders that can sleep in ssd1307fb driver
(Michal Vokáč)
- convert omapfb driver to use GPIO descriptors instead of GPIO
numbers for Amstrad Delta board (Janusz Krzysztofik)
- fix broken Kconfig menu dependencies (Randy Dunlap)
- convert fbdev subsystem to use %pOFn instead of device_node.name
(Rob Herring)
- remove the dead old CLPS711x LCD support driver (the new CLPS711x
LCD support driver is still available)
- misc fixes (Jia-Ju Bai, Gustavo A. R. Silva)
- misc cleanups (Mehdi Bounya, Nathan Chancellor, YueHaibing)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=PcLW
-----END PGP SIGNATURE-----
Merge tag 'fbdev-v4.20' of https://github.com/bzolnier/linux
Pull fbdev updates from Bartlomiej Zolnierkiewicz:
"No major changes to the subsystem itself, mainly fb drivers fixes &
cleanups (atyfb & udlfb updates stand out from the rest) + removal of
no longer needed old clps711xfb driver.
Details:
- update atyfb driver - improvements for ATI Mach64 chips: detect the
dot clock divider correctly on Sparc, fix display corruptions (due
to endianness issues and improper reading of accelerator
registers), optimize scrolling performance and also fix debugging
printks (Mikulas Patocka)
- rewrite USB unplug handling in udlfb driver using framebuffer
subsystem reference counting (Mikulas Patocka)
- fix support for native-mode display-timings in atmel_lcdfb driver
(Sam Ravnborg)
- fix information leak & add missing access_ok() checks in sbuslib
(Dan Carpenter)
- allow using GPIO expanders that can sleep in ssd1307fb driver
(Michal Vokáč)
- convert omapfb driver to use GPIO descriptors instead of GPIO
numbers for Amstrad Delta board (Janusz Krzysztofik)
- fix broken Kconfig menu dependencies (Randy Dunlap)
- convert fbdev subsystem to use %pOFn instead of device_node.name
(Rob Herring)
- remove the dead old CLPS711x LCD support driver (the new CLPS711x
LCD support driver is still available)
- misc fixes (Jia-Ju Bai, Gustavo A. R. Silva)
- misc cleanups (Mehdi Bounya, Nathan Chancellor, YueHaibing)"
* tag 'fbdev-v4.20' of https://github.com/bzolnier/linux: (22 commits)
video: fbdev: remove redundant 'default n' from Kconfig-s
video: fbdev: remove dead old CLPS711x LCD support driver
Revert "video: ssd1307fb: Do not hard code active-low reset sequence"
video: fbdev: arcfb: mark expected switch fall-through
pxa168fb: remove set but not used variables 'mi'
video: ssd1307fb: Do not hard code active-low reset sequence
video: ssd1307fb: Use gpiod_set_value_cansleep() for reset
fbdev: fix broken menu dependencies
video: fbdev: sis: Remove unnecessary parentheses and commented code
video: fbdev: omapfb: lcd_ams_delta: use GPIO lookup table
fbdev: sbuslib: integer overflow in sbusfb_ioctl_helper()
fbdev: sbuslib: use checked version of put_user()
fbdev: Convert to using %pOFn instead of device_node.name
atmel_lcdfb: support native-mode display-timings
Video: vgastate: fixed a spacing coding style
atyfb: fix debugging printks
mach64: optimize wait_for_fifo
mach64: fix image corruption due to reading accelerator registers
mach64: fix display corruption on big endian machines
mach64: detect the dot clock divider correctly on sparc
...
-----BEGIN PGP SIGNATURE-----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=Cc6D
-----END PGP SIGNATURE-----
Merge tag 'media/v4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- new dvb frontend driver: lnbh29
- new sensor drivers: imx319 and imx 355
- some old soc_camera driver renames to avoid conflict with new
drivers
- new i.MX Pixel Pipeline (PXP) mem-to-mem platform driver
- a new V4L2 frontend for the FWHT codec
- several other improvements, bug fixes, code cleanups, etc
* tag 'media/v4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (289 commits)
media: rename soc_camera I2C drivers
media: cec: forgot to cancel delayed work
media: vivid: Support 480p for webcam capture
media: v4l2-tpg: fix kernel oops when enabling HFLIP and OSD
media: vivid: Add 16-bit bayer to format list
media: v4l2-tpg-core: Add 16-bit bayer
media: pvrusb2: replace `printk` with `pr_*`
media: venus: vdec: fix decoded data size
media: cx231xx: fix potential sign-extension overflow on large shift
media: dt-bindings: media: rcar_vin: add device tree support for r8a7744
media: isif: fix a NULL pointer dereference bug
media: exynos4-is: make const array config_ids static
media: cx23885: make const array addr_list static
media: ivtv: make const array addr_list static
media: bttv-input: make const array addr_list static
media: cx18: Don't check for address of video_dev
media: dw9807-vcm: Fix probe error handling
media: dw9714: Remove useless error message
media: dw9714: Fix error handling in probe function
media: cec: name for RC passthrough device does not need 'RC for'
...
-----BEGIN PGP SIGNATURE-----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=3yxi
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2018-10-24' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"This is going to rebuild more than drm as it adds a new helper to
list.h for doing bulk updates. Seemed like a reasonable addition to
me.
Otherwise the usual merge window stuff lots of i915 and amdgpu, not so
much nouveau, and piles of everything else.
Core:
- Adds a new list.h helper for doing bulk list updates for TTM.
- Don't leak fb address in smem_start to userspace (comes with EXPORT
workaround for people using mali out of tree hacks)
- udmabuf device to turn memfd regions into dma-buf
- Per-plane blend mode property
- ref/unref replacements with get/put
- fbdev conflicting framebuffers code cleaned up
- host-endian format variants
- panel orientation quirk for Acer One 10
bridge:
- TI SN65DSI86 chip support
vkms:
- GEM support.
- Cursor support
amdgpu:
- Merge amdkfd and amdgpu into one module
- CEC over DP AUX support
- Picasso APU support + VCN dynamic powergating
- Raven2 APU support
- Vega20 enablement + kfd support
- ACP powergating improvements
- ABGR/XBGR display support
- VCN jpeg support
- xGMI support
- DC i2c/aux cleanup
- Ycbcr 4:2:0 support
- GPUVM improvements
- Powerplay and powerplay endian fixes
- Display underflow fixes
vmwgfx:
- Move vmwgfx specific TTM code to vmwgfx
- Split out vmwgfx buffer/resource validation code
- Atomic operation rework
bochs:
- use more helpers
- format/byteorder improvements
qxl:
- use more helpers
i915:
- GGTT coherency getparam
- Turn off resource streamer API
- More Icelake enablement + DMC firmware
- Full PPGTT for Ivybridge, Haswell and Valleyview
- DDB distribution based on resolution
- Limited range DP display support
nouveau:
- CEC over DP AUX support
- Initial HDMI 2.0 support
virtio-gpu:
- vmap support for PRIME objects
tegra:
- Initial Tegra194 support
- DMA/IOMMU integration fixes
msm:
- a6xx perf improvements + clock prefix
- GPU preemption optimisations
- a6xx devfreq support
- cursor support
rockchip:
- PX30 support
- rgb output interface support
mediatek:
- HDMI output support on mt2701 and mt7623
rcar-du:
- Interlaced modes on Gen3
- LVDS on R8A77980
- D3 and E3 SoC support
hisilicon:
- misc fixes
mxsfb:
- runtime pm support
sun4i:
- R40 TCON support
- Allwinner A64 support
- R40 HDMI support
omapdrm:
- Driver rework changing display pipeline ordering to use common code
- DMM memory barrier and irq fixes
- Errata workarounds
exynos:
- out-bridge support for LVDS bridge driver
- Samsung 16x16 tiled format support
- Plane alpha and pixel blend mode support
tilcdc:
- suspend/resume update
mali-dp:
- misc updates"
* tag 'drm-next-2018-10-24' of git://anongit.freedesktop.org/drm/drm: (1382 commits)
firmware/dmc/icl: Add missing MODULE_FIRMWARE() for Icelake.
drm/i915/icl: Fix signal_levels
drm/i915/icl: Fix DDI/TC port clk_off bits
drm/i915/icl: create function to identify combophy port
drm/i915/gen9+: Fix initial readout for Y tiled framebuffers
drm/i915: Large page offsets for pread/pwrite
drm/i915/selftests: Disable shrinker across mmap-exhaustion
drm/i915/dp: Link train Fallback on eDP only if fallback link BW can fit panel's native mode
drm/i915: Fix intel_dp_mst_best_encoder()
drm/i915: Skip vcpi allocation for MSTB ports that are gone
drm/i915: Don't unset intel_connector->mst_port
drm/i915: Only reset seqno if actually idle
drm/i915: Use the correct crtc when sanitizing plane mapping
drm/i915: Restore vblank interrupts earlier
drm/i915: Check fb stride against plane max stride
drm/amdgpu/vcn:Fix uninitialized symbol error
drm: panel-orientation-quirks: Add quirk for Acer One 10 (S1003)
drm/amd/amdgpu: Fix debugfs error handling
drm/amdgpu: Update gc_9_0 golden settings.
drm/amd/powerplay: update PPtable with DC BTC and Tvr SocLimit fields
...
Notable changes:
- A large series to rewrite our SLB miss handling, replacing a lot of fairly
complicated asm with much fewer lines of C.
- Following on from that, we now maintain a cache of SLB entries for each
process and preload them on context switch. Leading to a 27% speedup for our
context switch benchmark on Power9.
- Improvements to our handling of SLB multi-hit errors. We now print more debug
information when they occur, and try to continue running by flushing the SLB
and reloading, rather than treating them as fatal.
- Enable THP migration on 64-bit Book3S machines (eg. Power7/8/9).
- Add support for physical memory up to 2PB in the linear mapping on 64-bit
Book3S. We only support up to 512TB as regular system memory, otherwise the
percpu allocator runs out of vmalloc space.
- Add stack protector support for 32 and 64-bit, with a per-task canary.
- Add support for PTRACE_SYSEMU and PTRACE_SYSEMU_SINGLESTEP.
- Support recognising "big cores" on Power9, where two SMT4 cores are presented
to us as a single SMT8 core.
- A large series to cleanup some of our ioremap handling and PTE flags.
- Add a driver for the PAPR SCM (storage class memory) interface, allowing
guests to operate on SCM devices (acked by Dan).
- Changes to our ftrace code to handle very large kernels, where we need to use
a trampoline to get to ftrace_caller().
Many other smaller enhancements and cleanups.
Thanks to:
Alan Modra, Alistair Popple, Aneesh Kumar K.V, Anton Blanchard, Aravinda
Prasad, Bartlomiej Zolnierkiewicz, Benjamin Herrenschmidt, Breno Leitao,
Cédric Le Goater, Christophe Leroy, Christophe Lombard, Dan Carpenter, Daniel
Axtens, Finn Thain, Gautham R. Shenoy, Gustavo Romero, Haren Myneni, Hari
Bathini, Jia Hongtao, Joel Stanley, John Allen, Laurent Dufour, Madhavan
Srinivasan, Mahesh Salgaonkar, Mark Hairgrove, Masahiro Yamada, Michael
Bringmann, Michael Neuling, Michal Suchanek, Murilo Opsfelder Araujo, Nathan
Fontenot, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers, Oliver O'Halloran,
Paul Mackerras, Petr Vorel, Rashmica Gupta, Reza Arbab, Rob Herring, Sam
Bobroff, Samuel Mendoza-Jonas, Scott Wood, Stan Johnson, Stephen Rothwell,
Stewart Smith, Suraj Jitindar Singh, Tyrel Datwyler, Vaibhav Jain, Vasant
Hegde, YueHaibing, zhong jiang,
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJb01vTAAoJEFHr6jzI4aWADsEP/jqL3+2qxs098ra80tpXCpXJ
tgXCosEs4b35sGtyHeUWZZZfWXeisaPAIlP8zTx1n50HACZduDYRAl0Ew9XB7Xdw
enDHRVccD21FsmHBOx/Ii1rVJlovWlj6EQCWHKeZmNjeRoFuClVZ7CYmf+mBifKR
sw2Db2fKA/59wMTq2zIMy5pqYgqlAs4jTWS6uN5hKPoBmO/82ARnNG+qgLuloD3Z
O8zSDM9QQ7PpuyDgTjO9SAo2YjmEfXlEG6cOCCejsU3DMctaEAK5PUZ+blsHYHBH
BYZYKs/x4pcw0SO41GtTh0M2YqDYBVuBIpRw8lLZap97Xo9ucSkAm5WD3rGxk4CY
YeZKEPUql6MHN3+DKl8mx2F0V+Et/tio2HNqc9KReR1tfoolZAbe+SFZHfgmc/Rq
RD9nnG8KRd4K2K1BTqpkTmI1EtE7jPtPJPSV8gMGhgL/N5vPmH3mql/qyOtYx48E
6/hPzWESgs16VRZ/opLh8VvjlY1HBDODQhehhhl+o23/Vb8qEgRf8Uqhq50rQW1H
EeOqyyYQ90txSU31Sgy1kQkvOgIFAsBObWT1ZCJ3RbfGbB4/tdEAvZqTZRlXo2OY
7P0Sqcw/9Le5eJkHIlLtBv0TF7y1OYemCbLgRQzFlcRP+UKtYyg8eFnFjqbPEEmP
ulwhn/BfFVSgaYKQ503u
=I0pj
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Notable changes:
- A large series to rewrite our SLB miss handling, replacing a lot of
fairly complicated asm with much fewer lines of C.
- Following on from that, we now maintain a cache of SLB entries for
each process and preload them on context switch. Leading to a 27%
speedup for our context switch benchmark on Power9.
- Improvements to our handling of SLB multi-hit errors. We now print
more debug information when they occur, and try to continue running
by flushing the SLB and reloading, rather than treating them as
fatal.
- Enable THP migration on 64-bit Book3S machines (eg. Power7/8/9).
- Add support for physical memory up to 2PB in the linear mapping on
64-bit Book3S. We only support up to 512TB as regular system
memory, otherwise the percpu allocator runs out of vmalloc space.
- Add stack protector support for 32 and 64-bit, with a per-task
canary.
- Add support for PTRACE_SYSEMU and PTRACE_SYSEMU_SINGLESTEP.
- Support recognising "big cores" on Power9, where two SMT4 cores are
presented to us as a single SMT8 core.
- A large series to cleanup some of our ioremap handling and PTE
flags.
- Add a driver for the PAPR SCM (storage class memory) interface,
allowing guests to operate on SCM devices (acked by Dan).
- Changes to our ftrace code to handle very large kernels, where we
need to use a trampoline to get to ftrace_caller().
And many other smaller enhancements and cleanups.
Thanks to: Alan Modra, Alistair Popple, Aneesh Kumar K.V, Anton
Blanchard, Aravinda Prasad, Bartlomiej Zolnierkiewicz, Benjamin
Herrenschmidt, Breno Leitao, Cédric Le Goater, Christophe Leroy,
Christophe Lombard, Dan Carpenter, Daniel Axtens, Finn Thain, Gautham
R. Shenoy, Gustavo Romero, Haren Myneni, Hari Bathini, Jia Hongtao,
Joel Stanley, John Allen, Laurent Dufour, Madhavan Srinivasan, Mahesh
Salgaonkar, Mark Hairgrove, Masahiro Yamada, Michael Bringmann,
Michael Neuling, Michal Suchanek, Murilo Opsfelder Araujo, Nathan
Fontenot, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers, Oliver
O'Halloran, Paul Mackerras, Petr Vorel, Rashmica Gupta, Reza Arbab,
Rob Herring, Sam Bobroff, Samuel Mendoza-Jonas, Scott Wood, Stan
Johnson, Stephen Rothwell, Stewart Smith, Suraj Jitindar Singh, Tyrel
Datwyler, Vaibhav Jain, Vasant Hegde, YueHaibing, zhong jiang"
* tag 'powerpc-4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (221 commits)
Revert "selftests/powerpc: Fix out-of-tree build errors"
powerpc/msi: Fix compile error on mpc83xx
powerpc: Fix stack protector crashes on CPU hotplug
powerpc/traps: restore recoverability of machine_check interrupts
powerpc/64/module: REL32 relocation range check
powerpc/64s/radix: Fix radix__flush_tlb_collapsed_pmd double flushing pmd
selftests/powerpc: Add a test of wild bctr
powerpc/mm: Fix page table dump to work on Radix
powerpc/mm/radix: Display if mappings are exec or not
powerpc/mm/radix: Simplify split mapping logic
powerpc/mm/radix: Remove the retry in the split mapping logic
powerpc/mm/radix: Fix small page at boundary when splitting
powerpc/mm/radix: Fix overuse of small pages in splitting logic
powerpc/mm/radix: Fix off-by-one in split mapping logic
powerpc/ftrace: Handle large kernel configs
powerpc/mm: Fix WARN_ON with THP NUMA migration
selftests/powerpc: Fix out-of-tree build errors
powerpc/time: no steal_time when CONFIG_PPC_SPLPAR is not selected
powerpc/time: Only set CONFIG_ARCH_HAS_SCALED_CPUTIME on PPC64
powerpc/time: isolate scaled cputime accounting in dedicated functions.
...
- Sync dtc with upstream version v1.4.7-14-gc86da84d30e4
- Work to get rid of direct accesses to struct device_node name and
type pointers in preparation for removing them. New helpers for
parsing DT cpu nodes and conversions to use the helpers. printk
conversions to %pOFn for printing DT node names. Most went thru
subystem trees, so this is the remainder.
- Fixes to DT child node lookups to actually be restricted to child
nodes instead of treewide.
- Refactoring of dtb targets out of arch code. This makes the support
more uniform and enables building all dtbs on c6x, microblaze, and
powerpc.
- Various DT binding updates for Renesas r8a7744 SoC
- Vendor prefixes for Facebook, OLPC
- Restructuring of some ARM binding docs moving some peripheral bindings
out of board/SoC binding files
- New "secure-chosen" binding for secure world settings on ARM
- Dual licensing of 2 DT IRQ binding headers
-----BEGIN PGP SIGNATURE-----
iQJEBAABCgAuFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAlvTKWYQHHJvYmhAa2Vy
bmVsLm9yZwAKCRD6+121jbxhw8J5EACMAnrTxWQmXfQXOZEVxztcFavH6LP8mh2e
7FZIZ38jzHXXvl81tAg1nBhzFUU/qtvqW8NDCZ9OBxKvp6PFDNhWu241ZodSB1Kw
MZWy2A9QC+qbHYCC+SB5gOT0+Py3v7LNCBa5/TxhbFd35THJM8X0FP7gmcCGX593
9Ml1rqawT4mK5XmCpczT0cXxyC4TgVtpfDWZH2KgJTR/kwXVQlOQOGZ8a1y/wrt7
8TLIe7Qy4SFRzjhwbSta1PUehyYfe4uTSsXIJ84kMvNMxinLXQtvd7t9TfsK8p/R
WjYUneJskVjtxVrMQfdV4MxyFL1YEt2mYcr0PMKIWxMCgGDAZsHPoUZmjyh/PrCI
uiZtEHn3fXpUZAV/xEHHNirJxYyQfHGiksAT+lPrUXYYLCcZ3ZmqiTEYhGoQAfH5
CQPMuxA6yXxp6bov6zJwZSTZtkXciju8aQRhUhlxIfHTqezmGYeql/bnWd+InNuR
upANLZBh6D2jTWzDyobconkCCLlVkSqDoqOx725mMl6hIcdH9d2jVX7hwRf077VI
5i3CyPSJOkSOLSdB8bAPYfBoaDtH2bthxieUrkkSbIjbwHO1H6a2lxPeG/zah0a3
ePMGhi7J84UM4VpJEi000cP+bhPumJtJrG7zxP7ldXdfAF436sQ6KRptlcpLpj5i
IwMhUQNH+g==
=335v
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull Devicetree updates from Rob Herring:
"A bit bigger than normal as I've been busy this cycle.
There's a few things with dependencies and a few things subsystem
maintainers didn't pick up, so I'm taking them thru my tree.
The fixes from Johan didn't get into linux-next, but they've been
waiting for some time now and they are what's left of what subsystem
maintainers didn't pick up.
Summary:
- Sync dtc with upstream version v1.4.7-14-gc86da84d30e4
- Work to get rid of direct accesses to struct device_node name and
type pointers in preparation for removing them. New helpers for
parsing DT cpu nodes and conversions to use the helpers. printk
conversions to %pOFn for printing DT node names. Most went thru
subystem trees, so this is the remainder.
- Fixes to DT child node lookups to actually be restricted to child
nodes instead of treewide.
- Refactoring of dtb targets out of arch code. This makes the support
more uniform and enables building all dtbs on c6x, microblaze, and
powerpc.
- Various DT binding updates for Renesas r8a7744 SoC
- Vendor prefixes for Facebook, OLPC
- Restructuring of some ARM binding docs moving some peripheral
bindings out of board/SoC binding files
- New "secure-chosen" binding for secure world settings on ARM
- Dual licensing of 2 DT IRQ binding headers"
* tag 'devicetree-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (78 commits)
ARM: dt: relicense two DT binding IRQ headers
power: supply: twl4030-charger: fix OF sibling-node lookup
NFC: nfcmrvl_uart: fix OF child-node lookup
net: stmmac: dwmac-sun8i: fix OF child-node lookup
net: bcmgenet: fix OF child-node lookup
drm/msm: fix OF child-node lookup
drm/mediatek: fix OF sibling-node lookup
of: Add missing exports of node name compare functions
dt-bindings: Add OLPC vendor prefix
dt-bindings: misc: bk4: Add device tree binding for Liebherr's BK4 SPI bus
dt-bindings: thermal: samsung: Add SPDX license identifier
dt-bindings: clock: samsung: Add SPDX license identifiers
dt-bindings: timer: ostm: Add R7S9210 support
dt-bindings: phy: rcar-gen2: Add r8a7744 support
dt-bindings: can: rcar_can: Add r8a7744 support
dt-bindings: timer: renesas, cmt: Document r8a7744 CMT support
dt-bindings: watchdog: renesas-wdt: Document r8a7744 support
dt-bindings: thermal: rcar: Add device tree support for r8a7744
Documentation: dt: Add binding for /secure-chosen/stdout-path
dt-bindings: arm: zte: Move sysctrl bindings to their own doc
...
'default n' is the default value for any bool or tristate Kconfig
setting so there is no need to write it explicitly.
Also since commit f467c5640c ("kconfig: only write '# CONFIG_FOO
is not set' for visible symbols") the Kconfig behavior is the same
regardless of 'default n' being present or not:
...
One side effect of (and the main motivation for) this change is making
the following two definitions behave exactly the same:
config FOO
bool
config FOO
bool
default n
With this change, neither of these will generate a
'# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied).
That might make it clearer to people that a bare 'default n' is
redundant.
...
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Since commit c86f51737f ("ARM: clps711x: Switch to MULTIPLATFORM")
ARCH_CLPS711X depends on ARCH_MULTIPLATFORM to be enabled so the old
CLPS711x LCD support driver (enabled by the FB_CLPS711X_OLD config
option) can't be selected any longer. Remove all FB_CLPS711XX_OLD
code as it has been dead for over 2 years now. Please note that the
new CLPS711x LCD support driver (enabled by the FB_CLPS711X config
option) is still available in the kernel tree.
Reviewed-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
_PAGE_NO_CACHE is a platform specific flag. In addition, this flag
is misleading because one would think it requests a noncached page
whereas a noncached page is _PAGE_NO_CACHE | _PAGE_GUARDED
_PAGE_NO_CACHE alone means write combined noncached page, so lets
use ioremap_wc() instead.
_PAGE_WRITETHRU is also platform specific flag. Use ioremap_wt()
instead.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This reverts commit 9827f26374.
On 10/09/2018 02:20 AM, Shawn Guo wrote:
> Well, it means the change breaks the ABI between kernel and device tree,
> e.g. the new kernel will not work with existing/installed DTBs.
Revert the change until DTB compatibility issue is resolved.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
The driver for LD9040 AMOLED LCD panel was superseded with DRM driver
panel-samsung-ld9040.c. It does not support DeviceTree and respective
possible user (Exynos4210 Universal C210) is DeviceTree-only and uses
DRM version of driver.
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The driver for S6E63M0 AMOLED LCD panel is not used. It does not
support DeviceTree and respective possible users (S5Pv210 Aquila and
Goni boards) are DeviceTree-only.
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Clang warns that the address of a pointer will always evaluated as true
in a boolean context.
drivers/video/backlight/lm3639_bl.c:403:14: warning: address of
'pchip->cdev_torch' will always evaluate to 'true'
[-Wpointer-bool-conversion]
if (&pchip->cdev_torch)
~~ ~~~~~~~^~~~~~~~~~
drivers/video/backlight/lm3639_bl.c:405:14: warning: address of
'pchip->cdev_flash' will always evaluate to 'true'
[-Wpointer-bool-conversion]
if (&pchip->cdev_flash)
~~ ~~~~~~~^~~~~~~~~~
2 warnings generated.
These statements have been present since 2012, introduced by
commit 0f59858d51 ("backlight: add new lm3639 backlight
driver"). Given that they have been called unconditionally since
then presumably without any issues, removing the always true if
statements to fix the warnings without any real world changes.
Link: https://github.com/ClangBuiltLinux/linux/issues/119
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The "atomic" API allows us to configure PWM period and duty_cycle and
enable it in one call.
The patch also moves the pwm_init_state just before any use of the
pwm_state struct, this fixes a potential bug where pwm_get_state
can be called before pwm_init_state.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 115017 ("Missing break in switch")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Cc: Jaya Kumar <jayalk@intworks.biz>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/video/fbdev/pxa168fb.c: In function 'pxa168fb_set_par':
drivers/video/fbdev/pxa168fb.c:408:29: warning:
variable 'mi' set but not used [-Wunused-but-set-variable]
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Cc: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
The SSD130x OLED display reset signal is active low. Now the reset
sequence is implemented in such a way that users are forced to
define reset-gpios as GPIO_ACTIVE_HIGH in DT to make the reset work.
Do not hard code the active-low sequence into the driver but instead
allow the user to specify the gpio as GPIO_ACTIVE_LOW to reflect
the real world.
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
The reset signal can be produced by GPIO expander that can sleep.
In that case the probe function fails. Allow using GPIO expanders for
the reset signal by using the non-atomic gpiod_set_value_cansleep()
function.
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
The framebuffer options and devices menu is unintentionally split
or broken because some items in it do not depend on FB (including
several under omap and mmp).
Fix this by moving FB_CMDLINE, FB_NOTIFY, and FB_CLPS711X_OLD to
just before the FB Kconfig symbol definition and by moving the
omap, omap2, and mmp menus to last, following FB_SM712.
Also, the FB_VIA dependencies are duplicated by both being inside
an "if FB_VIA/endif" block and "depends on FB_VIA", so drop the
"depends on FB_VIA" lines since they are redundant.
Fixes: ea6763c104 ("video/fbdev: Always built-in video= cmdline parsing")
Fixes: 5ec9653806 ("fbdev: Make fb-notify a no-op if CONFIG_FB=n")
Fixes: ef74d46a4e ("video: clps711x: Add new Cirrus Logic CLPS711X framebuffer driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Linus Torvalds