Move some routines, including acpi_ec_dispatch_gpe(), that are only
used if CONFIG_PM_SLEEP is set to the #ifdef block containing the EC
suspend and resume callbacks, to make the "full EC PM picture" easier
to follow.
While at it, move the header of acpi_ec_dispatch_gpe() in the
header file to a CONFIG_PM_SLEEP #ifdef block.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Change acpi_ec_suspend() to use pm_suspend_no_platform() instead of
acpi_sleep_no_ec_events(), which allows the latter to be eliminated
along with the s2idle_in_progress variable which is only used by it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Since the ACPI SCI is set up for system wakeup before the "noirq"
suspend of devices, it is better to make suspend-to-idle follow
suspend-to-RAM (S3) and switch over the EC to polling during "noirq"
suspend (and back to interrupt-based flow during "noirq" resume).
The frequency of spurious wakeup interrupts from the EC may be
reduced this way.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Add a module parameter to prevent the ACPI LPS0 _DSM functions
from being invoked (if need be) and rework the suspend-to-idle
blacklist entries in acpisleep_dmi_table[] to make them simply
prevent suspend-to-idle from being used by default on the systems
in question (which really is the original purpose of those entries).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
To allow a subsequent change to be simpler, rearrange the code in
lps0_device_attach() to reduce the indentation level and (while
at it) make it avoid calling lpi_device_get_constraints() when
lps0_device_handle is not going to be set.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
The EC GPE needs to be set up for system wakeup only if there is a
driver depending on it, either intel-hid or intel-vbtn, bound to a
button device that is expected to wake up the system from sleep (such
as the power button on some Dell systems, like the XPS13 9360). It
doesn't need to be set up for waking up the system from sleep in any
other cases and whether or not it is expected to wake up the system
from sleep doesn't depend on whether or not the LPS0 device is
present in the ACPI namespace.
For this reason, rearrange the ACPI suspend-to-idle code to make the
drivers depending on the EC GPE wakeup take care of setting it up and
decouple that from the LPS0 device handling.
While at it, make intel-hid and intel-vbtn prepare for system wakeup
only if they are allowed to wake up the system from sleep by user
space (via sysfs).
[Note that acpi_ec_mark_gpe_for_wake() and acpi_ec_set_gpe_wake_mask()
are there to prevent the EC GPE from being disabled by the
acpi_enable_all_wakeup_gpes() call in acpi_s2idle_prepare(), so on
systems with either intel-hid or intel-vbtn this change doesn't
affect any interactions with the hardware or platform firmware.]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Note that after previous changes dpm_noirq_begin() and
dpm_noirq_end() each have only one caller, so move the code from
them to their respective callers and drop them.
Also note that dpm_noirq_resume_devices() and
dpm_noirq_suspend_devices() need not be exported any more, so make
them both static.
This change is not expected to alter functionality.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
After previous changes the suspend-to-idle code flow can be
integrated more tightly with the generic system suspend code flow
by making suspend_enter() call s2idle_loop() later and removing
the direct invocations of dpm_noirq_begin(),
dpm_noirq_suspend_devices(), dpm_noirq_end(), and
dpm_noirq_resume_devices() from the latter, so do that.
This change is not expected to alter functionality.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
After commit 33e4f80ee6 ("ACPI / PM: Ignore spurious SCI wakeups
from suspend-to-idle") the "noirq" phases of device suspend and
resume may run for multiple times during suspend-to-idle, if there
are spurious system wakeup events while suspended. However, this
is complicated and fragile and actually unnecessary.
The main reason for doing this is that on some systems the EC may
signal system wakeup events (power button events, for example) as
well as events that should not cause the system to resume (spurious
system wakeup events). Thus, in order to determine whether or not
a given event signaled by the EC while suspended is a proper system
wakeup one, the EC GPE needs to be dispatched and to start with that
was achieved by allowing the ACPI SCI action handler to run, which
was only possible after calling resume_device_irqs().
However, dispatching the EC GPE this way turned out to take too much
time in some cases and some EC events might be missed due to that, so
commit 68e2201185 ("ACPI: EC: Dispatch the EC GPE directly on
s2idle wake") started to dispatch the EC GPE right after a wakeup
event has been detected, so in fact the full ACPI SCI action handler
doesn't need to run any more to deal with the wakeups coming from the
EC.
Use this observation to simplify the suspend-to-idle control flow
so that the "noirq" phases of device suspend and resume are each
run only once in every suspend-to-idle cycle, which is reported to
significantly reduce power drawn by some systems when suspended to
idle (by allowing them to reach a deep platform-wide low-power state
through the suspend-to-idle flow). [What appears to happen is that
the "noirq" resume of devices after a spurious EC wakeup brings some
devices into a state in which they prevent the platform from reaching
the deep low-power state going forward, even after a subsequent
"noirq" suspend phase, and on some systems the EC triggers such
wakeups already when the "noirq" suspend of devices is running for
the first time in the given suspend/resume cycle, so the platform
cannot reach the deep low-power state at all.]
First, make acpi_s2idle_wake() use the acpi_ec_dispatch_gpe() return
value to determine whether or not the wakeup may have been triggered
by the EC (in which case the system wakeup is canceled and ACPI
events are processed in order to determine whether or not the event
is a proper system wakeup one) and use rearm_wake_irq() (introduced
by a previous change) in it to rearm the ACPI SCI for system wakeup
detection in case the system will remain suspended.
Second, drop acpi_s2idle_sync(), which is not needed any more, and
the corresponding global platform suspend-to-idle callback.
Next, drop the pm_wakeup_pending() check (which is an optimization
only) from __device_suspend_noirq() to prevent it from returning
errors on system wakeups occurring before the "noirq" phase of
device suspend is complete (as in the case of suspend-to-idle it is
not known whether or not these wakeups are suprious at that point),
in order to avoid having to carry out a "noirq" resume of devices
on a spurious system wakeup.
Finally, change the code flow in s2idle_loop() to (1) run the
"noirq" suspend of devices once before starting the loop, (2) check
for spurious EC wakeups (via the platform ->wake callback) for the
first time before calling s2idle_enter(), and (3) run the "noirq"
resume of devices once after leaving the loop.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
The role of the s2idle_wakeup variable is to cause
acpi_pm_wakeup_event() and acpi_pm_notify_handler() to
increment pm_abort_suspend and trigger a wakeup from
suspend-to-idle in case the ACPI SCI wakeup was canceled
by acpi_s2idle_wake().
However, for this purpose it need not be set in acpi_s2idle_wake()
and cleared in acpi_s2idle_sync(), respectively. In fact, it
may be set as early as in acpi_s2idle_prepare() and cleared as
late as in acpi_s2idle_restore(), so do that to allow subsequent
changes to be simpler.
This change is not expected to alter functionality.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
It is not actually guaranteed that pm_abort_suspend will be
nonzero when pm_system_cancel_wakeup() is called which may lead to
subtle issues, so make it use atomic_dec_if_positive() instead of
atomic_dec() for the safety sake.
Fixes: 33e4f80ee6 ("ACPI / PM: Ignore spurious SCI wakeups from suspend-to-idle")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
On some systems, if suspend-to-idle is used, the EC may signal system
wakeup events (power button events, for example) as well as events
that should not cause the system to resume and acpi_ec_dispatch_gpe()
needs to be called to determine whether or not the system should
resume then. In particular, if acpi_ec_dispatch_gpe() doesn't detect
any EC events at all, the system should remain suspended, so it is
useful to know when that is the case.
For this reason, make acpi_ec_dispatch_gpe() return a bool value
indicating whether or not any EC events have been detected by it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
In some cases it is useful to know whether or not the
acpi_ev_detect_gpe() called by acpi_dispatch_gpe() has found
the GPE to be active, so return the return value of it (whose
data type is u32) from latter.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Introduce a new function, rearm_wake_irq(), allowing a wakeup IRQ
to be armed for systen wakeup detection again without running any
action handlers associated with it after it has been armed for
wakeup detection and triggered.
That is useful for IRQs, like ACPI SCI, that may deliver wakeup
as well as non-wakeup interrupts when armed for systen wakeup
detection. In those cases, it may be possible to determine whether
or not the delivered interrupt is a systen wakeup one without
running the entire action handler (or handlers, if the IRQ is
shared) for the IRQ, and if the interrupt turns out to be a
non-wakeup one, the IRQ can be rearmed with the help of the
new function.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Fix several warnings/errors in validation of binding schemas.
-----BEGIN PGP SIGNATURE-----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=IkH4
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull Devicetree fixes from Rob Herring:
"Fix several warnings/errors in validation of binding schemas"
* tag 'devicetree-fixes-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: pinctrl: stm32: Fix missing 'clocks' property in examples
dt-bindings: iio: ad7124: Fix dtc warnings in example
dt-bindings: iio: avia-hx711: Fix avdd-supply typo in example
dt-bindings: pinctrl: aspeed: Fix AST2500 example errors
dt-bindings: pinctrl: aspeed: Fix 'compatible' schema errors
dt-bindings: riscv: Limit cpus schema to only check RiscV 'cpu' nodes
dt-bindings: Ensure child nodes are of type 'object'
Pull vfs documentation typo fix from Al Viro.
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
typo fix: it's d_make_root, not d_make_inode...
-----BEGIN PGP SIGNATURE-----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=rP0b
-----END PGP SIGNATURE-----
Merge tag '5.3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Two fixes for stable, one that had dependency on earlier patch in this
merge window and can now go in, and a perf improvement in SMB3 open"
* tag '5.3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal module number
cifs: flush before set-info if we have writeable handles
smb3: optimize open to not send query file internal info
cifs: copy_file_range needs to strip setuid bits and update timestamps
CIFS: fix deadlock in cached root handling
The commit b3aa14f022 ("iommu: remove the mapping_error dma_map_ops
method") incorrectly changed the checking from dma_ops_alloc_iova() in
map_sg() causes a crash under memory pressure as dma_ops_alloc_iova()
never return DMA_MAPPING_ERROR on failure but 0, so the error handling
is all wrong.
kernel BUG at drivers/iommu/iova.c:801!
Workqueue: kblockd blk_mq_run_work_fn
RIP: 0010:iova_magazine_free_pfns+0x7d/0xc0
Call Trace:
free_cpu_cached_iovas+0xbd/0x150
alloc_iova_fast+0x8c/0xba
dma_ops_alloc_iova.isra.6+0x65/0xa0
map_sg+0x8c/0x2a0
scsi_dma_map+0xc6/0x160
pqi_aio_submit_io+0x1f6/0x440 [smartpqi]
pqi_scsi_queue_command+0x90c/0xdd0 [smartpqi]
scsi_queue_rq+0x79c/0x1200
blk_mq_dispatch_rq_list+0x4dc/0xb70
blk_mq_sched_dispatch_requests+0x249/0x310
__blk_mq_run_hw_queue+0x128/0x200
blk_mq_run_work_fn+0x27/0x30
process_one_work+0x522/0xa10
worker_thread+0x63/0x5b0
kthread+0x1d2/0x1f0
ret_from_fork+0x22/0x40
Fixes: b3aa14f022 ("iommu: remove the mapping_error dma_map_ops method")
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The hexagon implementation pte_alloc_one(), pte_alloc_one_kernel(),
pte_free_kernel() and pte_free() is identical to the generic except of
lack of __GFP_ACCOUNT for the user PTEs allocation.
Switch hexagon to use generic version of these functions.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
to test and use this feature in the NTB transport layer. Also, bug
fixes for the AMD and Switchtec drivers, as well as some general
patches.
-----BEGIN PGP SIGNATURE-----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=P1lR
-----END PGP SIGNATURE-----
Merge tag 'ntb-5.3' of git://github.com/jonmason/ntb
Pull NTB updates from Jon Mason:
"New feature to add support for NTB virtual MSI interrupts, the ability
to test and use this feature in the NTB transport layer.
Also, bug fixes for the AMD and Switchtec drivers, as well as some
general patches"
* tag 'ntb-5.3' of git://github.com/jonmason/ntb: (22 commits)
NTB: Describe the ntb_msi_test client in the documentation.
NTB: Add MSI interrupt support to ntb_transport
NTB: Add ntb_msi_test support to ntb_test
NTB: Introduce NTB MSI Test Client
NTB: Introduce MSI library
NTB: Rename ntb.c to support multiple source files in the module
NTB: Introduce functions to calculate multi-port resource index
NTB: Introduce helper functions to calculate logical port number
PCI/switchtec: Add module parameter to request more interrupts
PCI/MSI: Support allocating virtual MSI interrupts
ntb_hw_switchtec: Fix setup MW with failure bug
ntb_hw_switchtec: Skip unnecessary re-setup of shared memory window for crosslink case
ntb_hw_switchtec: Remove redundant steps of switchtec_ntb_reinit_peer() function
NTB: correct ntb_dev_ops and ntb_dev comment typos
NTB: amd: Silence shift wrapping warning in amd_ntb_db_vector_mask()
ntb_hw_switchtec: potential shift wrapping bug in switchtec_ntb_init_sndev()
NTB: ntb_transport: Ensure qp->tx_mw_dma_addr is initaliazed
NTB: ntb_hw_amd: set peer limit register
NTB: ntb_perf: Clear stale values in doorbell and command SPAD register
NTB: ntb_perf: Disable NTB link after clearing peer XLAT registers
...
Now that examples are validated against the DT schema, an error with
required 'clocks' property missing is exposed:
Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.example.dt.yaml: \
pinctrl@40020000: gpio@0: 'clocks' is a required property
Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.example.dt.yaml: \
pinctrl@50020000: gpio@1000: 'clocks' is a required property
Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.example.dt.yaml: \
pinctrl@50020000: gpio@2000: 'clocks' is a required property
Add the missing 'clocks' properties to the examples to fix the errors.
Fixes: 2c9239c125 ("dt-bindings: pinctrl: Convert stm32 pinctrl bindings to json-schema")
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: linux-gpio@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: Rob Herring <robh@kernel.org>
With the conversion to DT schema, the examples are now compiled with
dtc. The ad7124 binding example has the following warning:
Documentation/devicetree/bindings/iio/adc/adi,ad7124.example.dts:19.11-21: \
Warning (reg_format): /example-0/adc@0:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1)
There's a default #size-cells and #address-cells values of 1 for
examples. For examples needing different values such as this one on a
SPI bus, they need to provide a SPI bus parent node.
Fixes: 26ae15e62d ("Convert AD7124 bindings documentation to YAML format.")
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: linux-iio@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Now that examples are validated against the DT schema, a typo in
avia-hx711 example generates a warning:
Documentation/devicetree/bindings/iio/adc/avia-hx711.example.dt.yaml: weight: 'avdd-supply' is a required property
Fix the typo.
Fixes: 5150ec3fe1 ("avia-hx711.yaml: transform DT binding to YAML")
Cc: Andreas Klinger <ak@it-klinger.de>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: linux-iio@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
The schema examples are now validated against the schema itself. The
AST2500 pinctrl schema has a couple of errors:
Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.example.dt.yaml: \
example-0: $nodename:0: 'example-0' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.example.dt.yaml: \
pinctrl: aspeed,external-nodes: [[1, 2]] is too short
Fixes: 0a617de167 ("dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema")
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Joel Stanley <joel@jms.id.au>
Cc: linux-aspeed@lists.ozlabs.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Rob Herring <robh@kernel.org>
The Aspeed pinctl schema have errors in the 'compatible' schema:
Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml: \
properties:compatible:enum: ['aspeed', 'ast2400-pinctrl', 'aspeed', 'g4-pinctrl'] has non-unique elements
Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml: \
properties:compatible:enum: ['aspeed', 'ast2500-pinctrl', 'aspeed', 'g5-pinctrl'] has non-unique elements
Flow style sequences have to be quoted if the vales contain ','. Fix
this by using the more common one line per entry formatting.
Fixes: 0a617de167 ("dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema")
Fixes: 07457937bb ("dt-bindings: pinctrl: aspeed: Convert AST2400 bindings to json-schema")
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Joel Stanley <joel@jms.id.au>
Cc: linux-aspeed@lists.ozlabs.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Rob Herring <robh@kernel.org>
Matching on the 'cpus' node was a bad choice because the schema is
incorrectly applied to non-RiscV cpus nodes. As we now have a common cpus
schema which checks the general structure, it is also redundant to do so
in the Risc-V CPU schema.
The downside is one could conceivably mix different architecture's cpu
nodes or have typos in the compatible string. The latter problem pretty
much exists for every schema.
Acked-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Properties which are child node definitions need to have an explict
type. Otherwise, a matching (DT) property can silently match when an
error is desired. Fix this up tree-wide. Once this is fixed, the
meta-schema will enforce this on any child node definitions.
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: linux-mtd@lists.infradead.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-spi@vger.kernel.org
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Pull more input updates from Dmitry Torokhov:
- Apple SPI keyboard and trackpad driver for newer Macs
- ALPS driver will ignore trackpoint-only devices to give the
trackpoint driver a chance to handle them properly
- another Lenovo is switched over to SMbus from PS/2
- assorted driver fixups.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: alps - fix a mismatch between a condition check and its comment
Input: psmouse - fix build error of multiple definition
Input: applespi - remove set but not used variables 'sts'
Input: add Apple SPI keyboard and trackpad driver
Input: alps - don't handle ALPS cs19 trackpoint-only device
Input: hyperv-keyboard - remove dependencies on PAGE_SIZE for ring buffer
Input: adp5589 - initialize GPIO controller parent device
Input: iforce - remove empty multiline comments
Input: synaptics - fix misuse of strlcpy
Input: auo-pixcir-ts - switch to using devm_add_action_or_reset()
Input: gtco - bounds check collection indent level
Input: mtk-pmic-keys - add of_node_put() before return
Input: sun4i-lradc-keys - add of_node_put() before return
Input: synaptics - whitelist Lenovo T580 SMBus intertouch
Fix various regressions:
- force unencrypted dma-coherent buffers if encryption bit can't fit
into the dma coherent mask (Tom Lendacky)
- avoid limiting request size if swiotlb is not used (me)
- fix swiotlb handling in dma_direct_sync_sg_for_cpu/device
(Fugang Duan)
-----BEGIN PGP SIGNATURE-----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=Bv+Q
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.3-1' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
"Fix various regressions:
- force unencrypted dma-coherent buffers if encryption bit can't fit
into the dma coherent mask (Tom Lendacky)
- avoid limiting request size if swiotlb is not used (me)
- fix swiotlb handling in dma_direct_sync_sg_for_cpu/device (Fugang
Duan)"
* tag 'dma-mapping-5.3-1' of git://git.infradead.org/users/hch/dma-mapping:
dma-direct: correct the physical addr in dma_direct_sync_sg_for_cpu/device
dma-direct: only limit the mapping size if swiotlb could be used
dma-mapping: add a dma_addressing_limited helper
dma-direct: Force unencrypted DMA under SME for certain DMA masks
Pull x86 fixes from Thomas Gleixner:
"A set of x86 specific fixes and updates:
- The CR2 corruption fixes which store CR2 early in the entry code
and hand the stored address to the fault handlers.
- Revert a forgotten leftover of the dropped FSGSBASE series.
- Plug a memory leak in the boot code.
- Make the Hyper-V assist functionality robust by zeroing the shadow
page.
- Remove a useless check for dead processes with LDT
- Update paravirt and VMware maintainers entries.
- A few cleanup patches addressing various compiler warnings"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry/64: Prevent clobbering of saved CR2 value
x86/hyper-v: Zero out the VP ASSIST PAGE on allocation
x86, boot: Remove multiple copy of static function sanitize_boot_params()
x86/boot/compressed/64: Remove unused variable
x86/boot/efi: Remove unused variables
x86/mm, tracing: Fix CR2 corruption
x86/entry/64: Update comments and sanity tests for create_gap
x86/entry/64: Simplify idtentry a little
x86/entry/32: Simplify common_exception
x86/paravirt: Make read_cr2() CALLEE_SAVE
MAINTAINERS: Update PARAVIRT_OPS_INTERFACE and VMWARE_HYPERVISOR_INTERFACE
x86/process: Delete useless check for dead process with LDT
x86: math-emu: Hide clang warnings for 16-bit overflow
x86/e820: Use proper booleans instead of 0/1
x86/apic: Silence -Wtype-limits compiler warnings
x86/mm: Free sme_early_buffer after init
x86/boot: Fix memory leak in default_get_smp_config()
Revert "x86/ptrace: Prevent ptrace from clearing the FS/GS selector" and fix the test
Pull perf tooling updates from Thomas Gleixner:
"A set of perf improvements and fixes:
perf db-export:
- Improvements in how COMM details are exported to databases for post
processing and use in the sql-viewer.py UI.
- Export switch events to the database.
BPF:
- Bump rlimit(MEMLOCK) for 'perf test bpf' and 'perf trace', just
like selftests/bpf/bpf_rlimit.h do, which makes errors due to
exhaustion of this limit, which are kinda cryptic (EPERM sometimes)
less frequent.
perf version:
- Fix segfault due to missing OPT_END(), noticed on PowerPC.
perf vendor events:
- Add JSON files for IBM s/390 machine type 8561.
perf cs-etm (ARM):
- Fix two cases of error returns not bing done properly: Invalid
ERR_PTR() use and loss of propagation error codes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits)
perf version: Fix segfault due to missing OPT_END()
perf vendor events s390: Add JSON files for machine type 8561
perf cs-etm: Return errcode in cs_etm__process_auxtrace_info()
perf cs-etm: Remove errnoeous ERR_PTR() usage in cs_etm__process_auxtrace_info
perf scripts python: export-to-postgresql.py: Export switch events
perf scripts python: export-to-sqlite.py: Export switch events
perf db-export: Export switch events
perf db-export: Factor out db_export__threads()
perf script: Add scripting operation process_switch()
perf scripts python: exported-sql-viewer.py: Use new 'has_calls' column
perf scripts python: exported-sql-viewer.py: Remove redundant semi-colons
perf scripts python: export-to-postgresql.py: Add has_calls column to comms table
perf scripts python: export-to-sqlite.py: Add has_calls column to comms table
perf db-export: Also export thread's current comm
perf db-export: Factor out db_export__comm()
perf scripts python: export-to-postgresql.py: Export comm details
perf scripts python: export-to-sqlite.py: Export comm details
perf db-export: Export comm details
perf db-export: Fix a white space issue in db_export__sample()
perf db-export: Move export__comm_thread into db_export__sample()
...
Pull core fixes from Thomas Gleixner:
- A collection of objtool fixes which address recent fallout partially
exposed by newer toolchains, clang, BPF and general code changes.
- Force USER_DS for user stack traces
[ Note: the "objtool fixes" are not all to objtool itself, but for
kernel code that triggers objtool warnings.
Things like missing function size annotations, or code that confuses
the unwinder etc. - Linus]
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
objtool: Support conditional retpolines
objtool: Convert insn type to enum
objtool: Fix seg fault on bad switch table entry
objtool: Support repeated uses of the same C jump table
objtool: Refactor jump table code
objtool: Refactor sibling call detection logic
objtool: Do frame pointer check before dead end check
objtool: Change dead_end_function() to return boolean
objtool: Warn on zero-length functions
objtool: Refactor function alias logic
objtool: Track original function across branches
objtool: Add mcsafe_handle_tail() to the uaccess safe list
bpf: Disable GCC -fgcse optimization for ___bpf_prog_run()
x86/uaccess: Remove redundant CLACs in getuser/putuser error paths
x86/uaccess: Don't leak AC flag into fentry from mcsafe_handle_tail()
x86/uaccess: Remove ELF function annotation from copy_user_handle_tail()
x86/head/64: Annotate start_cpu0() as non-callable
x86/entry: Fix thunk function ELF sizes
x86/kvm: Don't call kvm_spurious_fault() from .fixup
x86/kvm: Replace vmx_vmenter()'s call to kvm_spurious_fault() with UD2
...
Pull smp fix from Thomas Gleixner:
"Add warnings to the smp function calls so callers from wrong contexts
get detected"
* 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
smp: Warn on function calls from softirq context
Pull CONFIG_PREEMPT_RT stub config from Thomas Gleixner:
"The real-time preemption patch set exists for almost 15 years now and
while the vast majority of infrastructure and enhancements have found
their way into the mainline kernel, the final integration of RT is
still missing.
Over the course of the last few years, we have worked on reducing the
intrusivenness of the RT patches by refactoring kernel infrastructure
to be more real-time friendly. Almost all of these changes were
benefitial to the mainline kernel on their own, so there was no
objection to integrate them.
Though except for the still ongoing printk refactoring, the remaining
changes which are required to make RT a first class mainline citizen
are not longer arguable as immediately beneficial for the mainline
kernel. Most of them are either reordering code flows or adding RT
specific functionality.
But this now has hit a wall and turned into a classic hen and egg
problem:
Maintainers are rightfully wary vs. these changes as they make only
sense if the final integration of RT into the mainline kernel takes
place.
Adding CONFIG_PREEMPT_RT aims to solve this as a clear sign that RT
will be fully integrated into the mainline kernel. The final
integration of the missing bits and pieces will be of course done with
the same careful approach as we have used in the past.
While I'm aware that you are not entirely enthusiastic about that, I
think that RT should receive the same treatment as any other widely
used out of tree functionality, which we have accepted into mainline
over the years.
RT has become the de-facto standard real-time enhancement and is
shipped by enterprise, embedded and community distros. It's in use
throughout a wide range of industries: telecommunications, industrial
automation, professional audio, medical devices, data acquisition,
automotive - just to name a few major use cases.
RT development is backed by a Linuxfoundation project which is
supported by major stakeholders of this technology. The funding will
continue over the actual inclusion into mainline to make sure that the
functionality is neither introducing regressions, regressing itself,
nor becomes subject to bitrot. There is also a lifely user community
around RT as well, so contrary to the grim situation 5 years ago, it's
a healthy project.
As RT is still a good vehicle to exercise rarely used code paths and
to detect hard to trigger issues, you could at least view it as a QA
tool if nothing else"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/rt, Kconfig: Introduce CONFIG_PREEMPT_RT
- s390 support for KVM selftests
- LAPIC timer offloading to housekeeping CPUs
- Extend an s390 optimization for overcommitted hosts to all architectures
- Debugging cleanups and improvements
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJdMr1FAAoJEL/70l94x66DvIkH/iVuUX9jO1NoQ7qhxeo04MnT
GP9mX3XnWoI/iN0zAIRfQSP2/9a6+KblgdiziABhju58j5dCfAZGb5793TQppweb
3ubl11vy7YkzaXJ0b35K7CFhOU9oSlHHGyi5Uh+yyje5qWNxwmHpizxjynbFTKb6
+/S7O2Ua1VrAVvx0i0IRtwanIK/jF4dStVButgVaVdUva3zLaQmeI71iaJl9ddXY
bh50xoYua5Ek6+ENi+nwCNVy4OF152AwDbXlxrU0QbeA1B888Qio7nIqb3bwwPpZ
/8wMVvPzQgL7RmgtY5E5Z4cCYuu7mK8wgGxhuk3oszlVwZJ5rmnaYwGEl4x1s7o=
=giag
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more KVM updates from Paolo Bonzini:
"Mostly bugfixes, but also:
- s390 support for KVM selftests
- LAPIC timer offloading to housekeeping CPUs
- Extend an s390 optimization for overcommitted hosts to all
architectures
- Debugging cleanups and improvements"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits)
KVM: x86: Add fixed counters to PMU filter
KVM: nVMX: do not use dangling shadow VMCS after guest reset
KVM: VMX: dump VMCS on failed entry
KVM: x86/vPMU: refine kvm_pmu err msg when event creation failed
KVM: s390: Use kvm_vcpu_wake_up in kvm_s390_vcpu_wakeup
KVM: Boost vCPUs that are delivering interrupts
KVM: selftests: Remove superfluous define from vmx.c
KVM: SVM: Fix detection of AMD Errata 1096
KVM: LAPIC: Inject timer interrupt via posted interrupt
KVM: LAPIC: Make lapic timer unpinned
KVM: x86/vPMU: reset pmc->counter to 0 for pmu fixed_counters
KVM: nVMX: Ignore segment base for VMX memory operand when segment not FS or GS
kvm: x86: ioapic and apic debug macros cleanup
kvm: x86: some tsc debug cleanup
kvm: vmx: fix coccinelle warnings
x86: kvm: avoid constant-conversion warning
x86: kvm: avoid -Wsometimes-uninitized warning
KVM: x86: expose AVX512_BF16 feature to guest
KVM: selftests: enable pgste option for the linker on s390
KVM: selftests: Move kvm_create_max_vcpus test to generic code
...
This is the final round of mostly small fixes in our initial submit.
It's mostly minor fixes and driver updates. The only change of note
is adding a virt_boundary_mask to the SCSI host and host template to
parametrise this for NVMe devices instead of having them do a call in
slave_alloc. It's a fairly straightforward conversion except in the
two NVMe handling drivers that didn't set it who now have a virtual
infinity parameter added.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXTJS/yYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishQTNAQCsTdkA
IN1BvDBbE+KO8mvL5DuRxLtnDU6Pq5K6fkrE3gD/a1GkqyPPaJIuspq7fQY87DH/
o7VsJd/5uGphIE2Ls+M=
=38XV
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is the final round of mostly small fixes in our initial submit.
It's mostly minor fixes and driver updates. The only change of note is
adding a virt_boundary_mask to the SCSI host and host template to
parametrise this for NVMe devices instead of having them do a call in
slave_alloc. It's a fairly straightforward conversion except in the
two NVMe handling drivers that didn't set it who now have a virtual
infinity parameter added"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits)
scsi: megaraid_sas: set an unlimited max_segment_size
scsi: mpt3sas: set an unlimited max_segment_size for SAS 3.0 HBAs
scsi: IB/srp: set virt_boundary_mask in the scsi host
scsi: IB/iser: set virt_boundary_mask in the scsi host
scsi: storvsc: set virt_boundary_mask in the scsi host template
scsi: ufshcd: set max_segment_size in the scsi host template
scsi: core: take the DMA max mapping size into account
scsi: core: add a host / host template field for the virt boundary
scsi: core: Fix race on creating sense cache
scsi: sd_zbc: Fix compilation warning
scsi: libfc: fix null pointer dereference on a null lport
scsi: zfcp: fix GCC compiler warning emitted with -Wmaybe-uninitialized
scsi: zfcp: fix request object use-after-free in send path causing wrong traces
scsi: zfcp: fix request object use-after-free in send path causing seqno errors
scsi: megaraid_sas: Update driver version to 07.710.50.00
scsi: megaraid_sas: Add module parameter for FW Async event logging
scsi: megaraid_sas: Enable msix_load_balance for Invader and later controllers
scsi: megaraid_sas: Fix calculation of target ID
scsi: lpfc: reduce stack size with CONFIG_GCC_PLUGIN_STRUCTLEAK_VERBOSE
scsi: devinfo: BLIST_TRY_VPD_PAGES for SanDisk Cruzer Blade
...
- match the directory structure of the linux-libc-dev package to that of
Debian-based distributions
- fix incorrect include/config/auto.conf generation when Kconfig creates
it along with the .config file
- remove misleading $(AS) from documents
- clean up precious tag files by distclean instead of mrproper
- add a new coccinelle patch for devm_platform_ioremap_resource migration
- refactor module-related scripts to read modules.order instead of
$(MODVERDIR)/*.mod files to get the list of created modules
- remove MODVERDIR
- update list of header compile-test
- add -fcf-protection=none flag to avoid conflict with the retpoline
flags when CONFIG_RETPOLINE=y
- misc cleanups
-----BEGIN PGP SIGNATURE-----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=D36u
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- match the directory structure of the linux-libc-dev package to that
of Debian-based distributions
- fix incorrect include/config/auto.conf generation when Kconfig
creates it along with the .config file
- remove misleading $(AS) from documents
- clean up precious tag files by distclean instead of mrproper
- add a new coccinelle patch for devm_platform_ioremap_resource
migration
- refactor module-related scripts to read modules.order instead of
$(MODVERDIR)/*.mod files to get the list of created modules
- remove MODVERDIR
- update list of header compile-test
- add -fcf-protection=none flag to avoid conflict with the retpoline
flags when CONFIG_RETPOLINE=y
- misc cleanups
* tag 'kbuild-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits)
kbuild: add -fcf-protection=none when using retpoline flags
kbuild: update compile-test header list for v5.3-rc1
kbuild: split out *.mod out of {single,multi}-used-m rules
kbuild: remove 'prepare1' target
kbuild: remove the first line of *.mod files
kbuild: create *.mod with full directory path and remove MODVERDIR
kbuild: export_report: read modules.order instead of .tmp_versions/*.mod
kbuild: modpost: read modules.order instead of $(MODVERDIR)/*.mod
kbuild: modsign: read modules.order instead of $(MODVERDIR)/*.mod
kbuild: modinst: read modules.order instead of $(MODVERDIR)/*.mod
scsi: remove pointless $(MODVERDIR)/$(obj)/53c700.ver
kbuild: remove duplication from modules.order in sub-directories
kbuild: get rid of kernel/ prefix from in-tree modules.{order,builtin}
kbuild: do not create empty modules.order in the prepare stage
coccinelle: api: add devm_platform_ioremap_resource script
kbuild: compile-test headers listed in header-test-m as well
kbuild: remove unused hostcc-option
kbuild: remove tag files by distclean instead of mrproper
kbuild: add --hash-style= and --build-id unconditionally
kbuild: get rid of misleading $(AS) from documents
...
Pull dcache and mountpoint updates from Al Viro:
"Saner handling of refcounts to mountpoints.
Transfer the counting reference from struct mount ->mnt_mountpoint
over to struct mountpoint ->m_dentry. That allows us to get rid of the
convoluted games with ordering of mount shutdowns.
The cost is in teaching shrink_dcache_{parent,for_umount} to cope with
mixed-filesystem shrink lists, which we'll also need for the Slab
Movable Objects patchset"
* 'work.dcache2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
switch the remnants of releasing the mountpoint away from fs_pin
get rid of detach_mnt()
make struct mountpoint bear the dentry reference to mountpoint, not struct mount
Teach shrink_dcache_parent() to cope with mixed-filesystem shrink lists
fs/namespace.c: shift put_mountpoint() to callers of unhash_mnt()
__detach_mounts(): lookup_mountpoint() can't return ERR_PTR() anymore
nfs: dget_parent() never returns NULL
ceph: don't open-code the check for dead lockref
The recent fix for CR2 corruption introduced a new way to reliably corrupt
the saved CR2 value.
CR2 is saved early in the entry code in RDX, which is the third argument to
the fault handling functions. But it missed that between saving and
invoking the fault handler enter_from_user_mode() can be called. RDX is a
caller saved register so the invoked function can freely clobber it with
the obvious consequences.
The TRACE_IRQS_OFF call is safe as it calls through the thunk which
preserves RDX, but TRACE_IRQS_OFF_DEBUG is not because it also calls into
C-code outside of the thunk.
Store CR2 in R12 instead which is a callee saved register and move R12 to
RDX just before calling the fault handler.
Fixes: a0d14b8909 ("x86/mm, tracing: Fix CR2 corruption")
Reported-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1907201020540.1782@nanos.tec.linutronix.de
It's clearly documented that smp function calls cannot be invoked from
softirq handling context. Unfortunately nothing enforces that or emits a
warning.
A single function call can be invoked from softirq context only via
smp_call_function_single_async().
The only legit context is task context, so add a warning to that effect.
Reported-by: luferry <luferry@163.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190718160601.GP3402@hirez.programming.kicks-ass.net
Updates KVM_CAP_PMU_EVENT_FILTER so it can also whitelist or blacklist
fixed counters.
Signed-off-by: Eric Hankland <ehankland@google.com>
[No need to check padding fields for zero. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If a KVM guest is reset while running a nested guest, free_nested will
disable the shadow VMCS execution control in the vmcs01. However,
on the next KVM_RUN vmx_vcpu_run would nevertheless try to sync
the VMCS12 to the shadow VMCS which has since been freed.
This causes a vmptrld of a NULL pointer on my machime, but Jan reports
the host to hang altogether. Let's see how much this trivial patch fixes.
Reported-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Liran Alon <liran.alon@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If a perf_event creation fails due to any reason of the host perf
subsystem, it has no chance to log the corresponding event for guest
which may cause abnormal sampling data in guest result. In debug mode,
this message helps to understand the state of vPMC and we may not
limit the number of occurrences but not in a spamming style.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use kvm_vcpu_wake_up() in kvm_s390_vcpu_wakeup().
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Inspired by commit 9cac38dd5d (KVM/s390: Set preempted flag during
vcpu wakeup and interrupt delivery), we want to also boost not just
lock holders but also vCPUs that are delivering interrupts. Most
smp_call_function_many calls are synchronous, so the IPI target vCPUs
are also good yield candidates. This patch introduces vcpu->ready to
boost vCPUs during wakeup and interrupt delivery time; unlike s390 we do
not reuse vcpu->preempted so that voluntarily preempted vCPUs are taken
into account by kvm_vcpu_on_spin, but vmx_vcpu_pi_put is not affected
(VT-d PI handles voluntary preemption separately, in pi_pre_block).
Testing on 80 HT 2 socket Xeon Skylake server, with 80 vCPUs VM 80GB RAM:
ebizzy -M
vanilla boosting improved
1VM 21443 23520 9%
2VM 2800 8000 180%
3VM 1800 3100 72%
Testing on my Haswell desktop 8 HT, with 8 vCPUs VM 8GB RAM, two VMs,
one running ebizzy -M, the other running 'stress --cpu 2':
w/ boosting + w/o pv sched yield(vanilla)
vanilla boosting improved
1570 4000 155%
w/ boosting + w/ pv sched yield(vanilla)
vanilla boosting improved
1844 5157 179%
w/o boosting, perf top in VM:
72.33% [kernel] [k] smp_call_function_many
4.22% [kernel] [k] call_function_i
3.71% [kernel] [k] async_page_fault
w/ boosting, perf top in VM:
38.43% [kernel] [k] smp_call_function_many
6.31% [kernel] [k] async_page_fault
6.13% libc-2.23.so [.] __memcpy_avx_unaligned
4.88% [kernel] [k] call_function_interrupt
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The code in vmx.c does not use "program_invocation_name", so there
is no need to "#define _GNU_SOURCE" here.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When CPU raise #NPF on guest data access and guest CR4.SMAP=1, it is
possible that CPU microcode implementing DecodeAssist will fail
to read bytes of instruction which caused #NPF. This is AMD errata
1096 and it happens because CPU microcode reading instruction bytes
incorrectly attempts to read code as implicit supervisor-mode data
accesses (that is, just like it would read e.g. a TSS), which are
susceptible to SMAP faults. The microcode reads CS:RIP and if it is
a user-mode address according to the page tables, the processor
gives up and returns no instruction bytes. In this case,
GuestIntrBytes field of the VMCB on a VMEXIT will incorrectly
return 0 instead of the correct guest instruction bytes.
Current KVM code attemps to detect and workaround this errata, but it
has multiple issues:
1) It mistakenly checks if guest CR4.SMAP=0 instead of guest CR4.SMAP=1,
which is required for encountering a SMAP fault.
2) It assumes SMAP faults can only occur when guest CPL==3.
However, in case guest CR4.SMEP=0, the guest can execute an instruction
which reside in a user-accessible page with CPL<3 priviledge. If this
instruction raise a #NPF on it's data access, then CPU DecodeAssist
microcode will still encounter a SMAP violation. Even though no sane
OS will do so (as it's an obvious priviledge escalation vulnerability),
we still need to handle this semanticly correct in KVM side.
Note that (2) *is* a useful optimization, because CR4.SMAP=1 is an easy
triggerable condition and guests usually enable SMAP together with SMEP.
If the vCPU has CR4.SMEP=1, the errata could indeed be encountered onlt
at guest CPL==3; otherwise, the CPU would raise a SMEP fault to guest
instead of #NPF. We keep this condition to avoid false positives in
the detection of the errata.
In addition, to avoid future confusion and improve code readbility,
include details of the errata in code and not just in commit message.
Fixes: 05d5a48635 ("KVM: SVM: Workaround errata#1096 (insn_len maybe zero on SMAP violation)")
Cc: Singh Brijesh <brijesh.singh@amd.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rafael J. Wysocki