The CREG block on lpc18xx contains configuration register
for two low power clocks. Support enabling of these two
clocks with a clk driver that access CREG trough the
syscon regmap interface.
These clocks are needed to support peripherals like the
internal RTC on lpc18xx.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Remove the following false positives compilation warning:
- drivers/clk/nxp/clk-lpc32xx.c: In function 'lpc32xx_clk_register':
warning: 'hw' may be used uninitialized in this function [-Wmaybe-uninitialized]
- drivers/clk/nxp/clk-lpc32xx.c: In function 'clk_hclk_pll_round_rate':
warning: 'p' may be used uninitialized in this function [-Wmaybe-uninitialized]
warning: 'n' may be used uninitialized in this function [-Wmaybe-uninitialized]
warning: 'm' may be used uninitialized in this function [-Wmaybe-uninitialized]
Tested using gcc version 4.7.3.
Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
[sboyd@codeaurora.org: Drop assignment of hw to NULL as return
silences it and is less likely to lead to hiding problems later]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This patch add the support to setup the HCLK PLL output
using the "assigned-clock-rates" parameter in the device tree.
If the option is not use, the clock setup by the kickstart
and/or bootloader remain unchanged.
The previous kernel version did not change the clock frequency
output setup by the kickstart and/or bootloader;
this version always setup the clock frequency output to 208MHz.
Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The following errors are display in the console during the power-on:
[ 0.000000] lpc32xx_usb_clk_init: failed to register (null) clock: -12
[ 0.000000] lpc32xx_clk_init: failed to register (null) clock: -12
There is no need to register clock "0"; the first clock used is 1;
Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
[sboyd@codeaurora.org: s/prepare/register/]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
to_clk_*(_hw) macros have been repeatedly defined in many places.
This patch moves all the to_clk_*(_hw) definitions in the common
clock framework to public header clk-provider.h, and drop the local
definitions.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Commit e6d5e7d90b ("clk-divider: Fix READ_ONLY when divider > 1") removed
the special ops struct for read-only clocks and instead opted to handle
them inside the regular ops.
On the rk3368 this results in breakage as aclkm now gets set a value.
While it is the same divider value, the A53 core still doesn't like it,
which can result in the cpu ending up in a hang.
The reason being that "ACLKENMasserts one clock cycle before the rising
edge of ACLKM" and the clock should only be touched when STANDBYWFIL2
is asserted.
To fix this, reintroduce the read-only ops but do include the round_rate
callback. That way no writes that may be unsafe are done to the divider
register in any case.
The Rockchip use of the clk_divider_ops is adapted to this split again,
as is the nxp, lpc18xx-ccu driver that was included since the original
commit. On lpc18xx-ccu the divider seems to always be read-only
so only uses the new ops now.
Fixes: e6d5e7d90b ("clk-divider: Fix READ_ONLY when divider > 1")
Reported-by: Zhang Qing <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Add support for all configurable clocks found on NXP LPC32xx SoC.
The list contains several heterogenous groups of clocks:
* system clocks including multiple dividers and muxes,
* x397 PLL, HCLK PLL and USB PLL,
* peripheral clocks inherited from rtc, hclk and pclk,
* USB controller clocks: AHB slave, I2C, OTG, OHCI and device.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
The clock consumer (CCU) of the CGU must be able to check if a CGU
base clock is really running since access to the CCU registers
requires a running base clock. Access with a disabled base clock will
cause the system to hang. Fix this issue by adding code that check if
the parent clock is running in the is_enabled clk_ops callback. Since
certain clocks can be cascaded this must be added to all clock gates.
The hang would occur if the boot ROM or boot loader didn't setup and
enable the USB0 clock. Then when the clk framework tried to access
the CCU register it would hang the system.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
CCU branch clock register must only be accessed while the base
(parent) clock is running. Access with a disabled base clock
will cause the system to hang. Fix this issue by adding code
that check if the parent clock is running in the is_enabled
clk_ops callback.
This hang would occur when disabling unused clocks after AMBA
runtime pm had already disabled some of the clocks.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
provider driver.
Acked-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Add driver for NXP LPC18xx/43xx Clock Control Unit (CCU). The CCU
provides fine grained gating of most clocks present in the SoC.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Add driver for NXP LPC18xx/43xx Clock Generation Unit (CGU). The CGU
contains several clock generators and output stages that route the
clocks either directly to peripherals or to a Clock Control Unit
(CCU).
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Joachim Eastwood