usNIC calls WARN_ON(spin_is_locked..) at few places. In some of these
instances, the call is made while holding a spinlock. Change
all WARN_ON(spin_is_locked...) calls in usNIC to
lockdep_assert_held to make it fool-proof bc the latter can be
called while holding a spinlock and unlike spin_is_locked,
lockdep_assert_held also works correctly on UP.
Signed-off-by: Upinder Malhi <umalhi@cisco.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
This adds a driver that allows userspace to use UD-like QPs over a
proprietary Cisco transport with Cisco's Virtual Interface Cards (VICs),
including VIC 1240 and 1280 cards.
Signed-off-by: Upinder Malhi <umalhi@cisco.com>
Signed-off-by: Christian Benvenuti <benve@cisco.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
OCRDMA_GEN2_FAMILY is wrongly defined as 0x02 -- it should be 0x0F.
Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Fix ah->av->valid bit position and big endian portability.
Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Conflicts:
drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c
net/ipv6/ip6_tunnel.c
net/ipv6/ip6_vti.c
ipv6 tunnel statistic bug fixes conflicting with consolidation into
generic sw per-cpu net stats.
qlogic conflict between queue counting bug fix and the addition
of multiple MAC address support.
Signed-off-by: David S. Miller <davem@davemloft.net>
When we create a new infiniband link with uninfiniband device, e.g. `ip link
add link em1 type ipoib pkey 0x8001`. We will get a NULL pointer dereference
cause other dev like Ethernet don't have struct ib_device.
The code path is:
rtnl_newlink
|-- ipoib_new_child_link
|-- __ipoib_vlan_add
|-- ipoib_set_dev_features
|-- ib_query_device
Fix this bug by make sure the src net is infiniband when create new link.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
"Some holiday bug fixes for 3.13... There is still one bug I'd like to
get fixed before 3.13-final.
The vlan code erroneously assignes the header ops of the underlying
real device to the VLAN device above it when the real device can
hardware offload VLAN handling. That's completely bogus because
header ops are tied to the device type, so they only expect to see a
'dev' argument compatible with their ops.
The fix is the have the VLAN code use a special set of header ops that
does the pass-thru correctly, by calling the underlying real device's
header ops but _also_ passing in the real device instead of the VLAN
device.
That fix is currently waiting some testing.
Anyways, of note here:
1) Fix bitmap edge case in radiotap, from Johannes Berg.
2) Fix oops on driver unload in rtlwifi, from Larry Finger.
3) Bonding doesn't do locking correctly during speed/duplex/link
changes, from Ding Tianhong.
4) Fix header parsing in GRE code, this bug has been around for a few
releases. From Timo Teräs.
5) SIT tunnel driver MTU check needs to take GSO into account, from
Eric Dumazet.
6) Minor info leak in inet_diag, from Daniel Borkmann.
7) Info leak in YAM hamradio driver, from Salva Peiró.
8) Fix route expiration state handling in ipv6 routing code, from Li
RongQing.
9) DCCP probe module does not check request_module()'s return value,
from Wang Weidong.
10) cpsw driver passes NULL device names to request_irq(), from
Mugunthan V N.
11) Prevent a NULL splat in RDS binding code, from Sasha Levin.
12) Fix 4G overflow test in tg3 driver, from Nithin Sujir.
13) Cure use after free in arc_emac and fec driver's software
timestamp handling, from Eric Dumazet.
14) SIT driver can fail to release the route when
iptunnel_handle_offloads() throws an error. From Li RongQing.
15) Several batman-adv fixes from Simon Wunderlich and Antonio
Quartulli.
16) Fix deadlock during TIPC socket release, from Ying Xue.
17) Fix regression in ROSE protocol recvmsg() msg_name handling, from
Florian Westphal.
18) stmmac PTP support releases wrong spinlock, from Vince Bridgers"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (73 commits)
stmmac: Fix incorrect spinlock release and PTP cap detection.
phy: IRQ cannot be shared
net: rose: restore old recvmsg behavior
xen-netback: fix guest-receive-side array sizes
fec: Do not assume that PHY reset is active low
tipc: fix deadlock during socket release
netfilter: nf_tables: fix wrong datatype in nft_validate_data_load()
batman-adv: fix vlan header access
batman-adv: clean nf state when removing protocol header
batman-adv: fix alignment for batadv_tvlv_tt_change
batman-adv: fix size of batadv_bla_claim_dst
batman-adv: fix size of batadv_icmp_header
batman-adv: fix header alignment by unrolling batadv_header
batman-adv: fix alignment for batadv_coded_packet
netfilter: nf_tables: fix oops when updating table with user chains
netfilter: nf_tables: fix dumping with large number of sets
ipv6: release dst properly in ipip6_tunnel_xmit
netxen: Correct off-by-one errors in bounds checks
net: Add some clarification to skb_tx_timestamp() comment.
arc_emac: fix potential use after free
...
Use the possibly more efficient ether_addr_equal
to instead of memcmp.
Cc: Roland Dreier <roland@kernel.org>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Cc: Faisal Latif <faisal.latif@intel.com>
Cc: linux-rdma@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Wang Weidong <wangweidong1@huawei.com>
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Additional checks for uverbs to ensure forward compatibility, handle
malformed input better.
- Fix potential use-after-free in iWARP connection manager.
- Make a function static.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=bol6
-----END PGP SIGNATURE-----
Merge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
Pull infiniband fixes from Roland Dreier:
"Last batch of InfiniBand/RDMA changes for 3.13 / 2014:
- Additional checks for uverbs to ensure forward compatibility,
handle malformed input better.
- Fix potential use-after-free in iWARP connection manager.
- Make a function static"
* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
IB/uverbs: Check access to userspace response buffer in extended command
IB/uverbs: Check input length in flow steering uverbs
IB/uverbs: Set error code when fail to consume all flow_spec items
IB/uverbs: Check reserved fields in create_flow
IB/uverbs: Check comp_mask in destroy_flow
IB/uverbs: Check reserved field in extended command header
IB/uverbs: New macro to set pointers to NULL if length is 0 in INIT_UDATA()
IB/core: const'ify inbuf in struct ib_udata
RDMA/iwcm: Don't touch cm_id after deref in rem_ref
RDMA/cxgb4: Make _c4iw_write_mem_dma() static
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Based on original work by Santosh Rastapur <santosh@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a check on the output buffer with access_ok(VERIFY_WRITE, ...)
to ensure the whole buffer is in userspace memory before using the
pointer in uverbs functions. If the buffer or a subset of it is not
valid, returns -EFAULT to the caller.
This will also catch invalid buffer before the final call to
copy_to_user() which happen late in most uverb functions.
Just like the check in read(2) syscall, it's a sanity check to detect
invalid parameters provided by userspace. This particular check was added
in vfs_read() by Linus Torvalds for v2.6.12 with following commit message:
https://git.kernel.org/cgit/linux/kernel/git/tglx/history.git/commit/?id=fd770e66c9a65b14ce114e171266cf6f393df502
Make read/write always do the full "access_ok()" tests.
The actual user copy will do them too, but only for the
range that ends up being actually copied. That hides
bugs when the range has been clamped by file size or other
issues.
Note: there's no need to check input buffer since vfs_write() already does
access_ok(VERIFY_READ, ...) as part of write() syscall.
Link: http://marc.info/?i=cover.1387273677.git.ydroneaud@opteya.com
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Since ib_copy_from_udata() doesn't check yet the available input data
length before accessing userspace memory, an explicit check of this
length is required to prevent:
- reading past the user provided buffer,
- underflow when subtracting the expected command size from the input
length.
This will ensure the newly added flow steering uverbs don't try to
process truncated commands.
Link: http://marc.info/?i=cover.1386798254.git.ydroneaud@opteya.com>
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
If the flow_spec items parsed count does not match the number of items
declared in the flow_attr command, or if not all bytes are used for
flow_spec items (eg. trailing garbage), a log message is reported and
the function leave through the error path. Unfortunately the error
code is currently not set.
This patch set error code to -EINVAL in such cases, so that the error
is reported to userspace instead of silently fail.
Link: http://marc.info/?i=cover.1386798254.git.ydroneaud@opteya.com>
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
As noted by Daniel Vetter in its article "Botching up ioctls"[1]
"Check *all* unused fields and flags and all the padding for whether
it's 0, and reject the ioctl if that's not the case. Otherwise
your nice plan for future extensions is going right down the
gutters since someone *will* submit an ioctl struct with random
stack garbage in the yet unused parts. Which then bakes in the ABI
that those fields can never be used for anything else but garbage."
It's important to ensure that reserved fields are set to known value,
so that it will be possible to use them latter to extend the ABI.
The same reasonning apply to comp_mask field present in newer uverbs
command: per commit 22878dbc91 ("IB/core: Better checking of
userspace values for receive flow steering"), unsupported values in
comp_mask are rejected.
[1] http://blog.ffwll.ch/2013/11/botching-up-ioctls.html
Link: http://marc.info/?i=cover.1386798254.git.ydroneaud@opteya.com>
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
As noted by Daniel Vetter in its article "Botching up ioctls"[1]
"Check *all* unused fields and flags and all the padding for whether
it's 0, and reject the ioctl if that's not the case. Otherwise
your nice plan for future extensions is going right down the
gutters since someone *will* submit an ioctl struct with random
stack garbage in the yet unused parts. Which then bakes in the ABI
that those fields can never be used for anything else but garbage."
It's important to ensure that reserved fields are set to known value,
so that it will be possible to use them latter to extend the ABI.
The same reasonning apply to comp_mask field present in newer uverbs
command: per commit 22878dbc91 ("IB/core: Better checking of
userspace values for receive flow steering"), unsupported values in
comp_mask are rejected.
[1] http://blog.ffwll.ch/2013/11/botching-up-ioctls.html
Link: http://marc.info/?i=cover.1386798254.git.ydroneaud@opteya.com>
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Trying to have a ternary operator to choose between NULL (or 0) and the
real pointer value in invocations leads to an impossible choice between
a sparse error about a literal 0 used as a NULL pointer, and a gcc
warning about "pointer/integer type mismatch in conditional expression."
Rather than clutter the source with more casts, move the ternary
operator into a new INIT_UDATA_BUF_OR_NULL() macro, which makes it
easier to use and simplifies its callers.
Reported-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
This patch moves INIT_WORK setup for cq_desc->cq_[rx,tx]_work into
isert_create_device_ib_res(), instead of being done each callback
invocation in isert_cq_[rx,tx]_callback().
This also fixes a 'INFO: trying to register non-static key' warning
when cancel_work_sync() is called before INIT_WORK has setup the
struct work_struct.
Reported-by: Or Gerlitz <ogerlitz@mellanox.com>
Cc: <stable@vger.kernel.org> #3.12+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Userspace input buffer is not modified by kernel, so it can be 'const'.
This is also a prerequisite to remove the implicit cast
from INIT_UDATA().
Link: http://marc.info/?i=cover.1386798254.git.ydroneaud@opteya.com>
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
rem_ref() calls iwcm_deref_id(), which will wake up any blockers on
cm_id_priv->destroy_comp if the refcnt hits 0. That will unblock
someone in iw_destroy_cm_id() which will free the cmid. If that
happens before rem_ref() calls test_bit(IWCM_F_CALLBACK_DESTROY,
&cm_id_priv->flags), then the test_bit() will touch freed memory.
The fix is to read the bit first, then deref. We should never be in
iw_destroy_cm_id() with IWCM_F_CALLBACK_DESTROY set, and there is a
BUG_ON() to make sure of that.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
This patch marks the function _c4iw_write_mem_dma() as static
because it is not used outside this file, which fixes the warning:
drivers/infiniband/hw/cxgb4/mem.c:176:5: warning: no previous prototype for ‘_c4iw_write_mem_dma’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: <stable@vger.kernel.org> #3.10+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Pull SCSI target updates from Nicholas Bellinger:
"Things have been quiet this round with mostly bugfixes, percpu
conversions, and other minor iscsi-target conformance testing changes.
The highlights include:
- Add demo_mode_discovery attribute for iscsi-target (Thomas)
- Convert tcm_fc(FCoE) to use percpu-ida pre-allocation
- Add send completion interrupt coalescing for ib_isert
- Convert target-core to use percpu-refcounting for se_lun
- Fix mutex_trylock usage bug in iscsit_increment_maxcmdsn
- tcm_loop updates (Hannes)
- target-core ALUA cleanups + prep for v3.14 SCSI Referrals support (Hannes)
v3.14 is currently shaping to be a busy development cycle in target
land, with initial support for T10 Referrals and T10 DIF currently on
the roadmap"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (40 commits)
iscsi-target: chap auth shouldn't match username with trailing garbage
iscsi-target: fix extract_param to handle buffer length corner case
iscsi-target: Expose default_erl as TPG attribute
target_core_configfs: split up ALUA supported states
target_core_alua: Make supported states configurable
target_core_alua: Store supported ALUA states
target_core_alua: Rename ALUA_ACCESS_STATE_OPTIMIZED
target_core_alua: spellcheck
target core: rename (ex,im)plict -> (ex,im)plicit
percpu-refcount: Add percpu-refcount.o to obj-y
iscsi-target: Do not reject non-immediate CmdSNs exceeding MaxCmdSN
iscsi-target: Convert iscsi_session statistics to atomic_long_t
target: Convert se_device statistics to atomic_long_t
target: Fix delayed Task Aborted Status (TAS) handling bug
iscsi-target: Reject unsupported multi PDU text command sequence
ib_isert: Avoid duplicate iscsit_increment_maxcmdsn call
iscsi-target: Fix mutex_trylock usage in iscsit_increment_maxcmdsn
target: Core does not need blkdev.h
target: Pass through I/O topology for block backstores
iser-target: Avoid using FRMR for single dma entry requests
...
- Re-enable flow steering verbs with new improved userspace ABI
- Fixes for slow connection due to GID lookup scalability
- IPoIB fixes
- Many fixes to HW drivers including mlx4, mlx5, ocrdma and qib
- Further improvements to SRP error handling
- Add new transport type for Cisco usNIC
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=xxC+
-----END PGP SIGNATURE-----
Merge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
Pull infiniband/rdma updates from Roland Dreier:
- Re-enable flow steering verbs with new improved userspace ABI
- Fixes for slow connection due to GID lookup scalability
- IPoIB fixes
- Many fixes to HW drivers including mlx4, mlx5, ocrdma and qib
- Further improvements to SRP error handling
- Add new transport type for Cisco usNIC
* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (66 commits)
IB/core: Re-enable create_flow/destroy_flow uverbs
IB/core: extended command: an improved infrastructure for uverbs commands
IB/core: Remove ib_uverbs_flow_spec structure from userspace
IB/core: Use a common header for uverbs flow_specs
IB/core: Make uverbs flow structure use names like verbs ones
IB/core: Rename 'flow' structs to match other uverbs structs
IB/core: clarify overflow/underflow checks on ib_create/destroy_flow
IB/ucma: Convert use of typedef ctl_table to struct ctl_table
IB/cm: Convert to using idr_alloc_cyclic()
IB/mlx5: Fix page shift in create CQ for userspace
IB/mlx4: Fix device max capabilities check
IB/mlx5: Fix list_del of empty list
IB/mlx5: Remove dead code
IB/core: Encorce MR access rights rules on kernel consumers
IB/mlx4: Fix endless loop in resize CQ
RDMA/cma: Remove unused argument and minor dead code
RDMA/ucma: Discard events for IDs not yet claimed by user space
IB/core: Add Cisco usNIC rdma node and transport types
RDMA/nes: Remove self-assignment from nes_query_qp()
IB/srp: Report receive errors correctly
...
This commit reverts commit 7afbddfae9 ("IB/core: Temporarily disable
create_flow/destroy_flow uverbs"). Since the uverbs extensions
functionality was experimental for v3.12, this patch re-enables the
support for them and flow-steering for v3.13.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Commit 400dbc9658 ("IB/core: Infrastructure for extensible uverbs
commands") added an infrastructure for extensible uverbs commands
while later commit 436f2ad05a ("IB/core: Export ib_create/destroy_flow
through uverbs") exported ib_create_flow()/ib_destroy_flow() functions
using this new infrastructure.
According to the commit 400dbc9658, the purpose of this
infrastructure is to support passing around provider (eg. hardware)
specific buffers when userspace issue commands to the kernel, so that
it would be possible to extend uverbs (eg. core) buffers independently
from the provider buffers.
But the new kernel command function prototypes were not modified to
take advantage of this extension. This issue was exposed by Roland
Dreier in a previous review[1].
So the following patch is an attempt to a revised extensible command
infrastructure.
This improved extensible command infrastructure distinguish between
core (eg. legacy)'s command/response buffers from provider
(eg. hardware)'s command/response buffers: each extended command
implementing function is given a struct ib_udata to hold core
(eg. uverbs) input and output buffers, and another struct ib_udata to
hold the hw (eg. provider) input and output buffers.
Having those buffers identified separately make it easier to increase
one buffer to support extension without having to add some code to
guess the exact size of each command/response parts: This should make
the extended functions more reliable.
Additionally, instead of relying on command identifier being greater
than IB_USER_VERBS_CMD_THRESHOLD, the proposed infrastructure rely on
unused bits in command field: on the 32 bits provided by command
field, only 6 bits are really needed to encode the identifier of
commands currently supported by the kernel. (Even using only 6 bits
leaves room for about 23 new commands).
So this patch makes use of some high order bits in command field to
store flags, leaving enough room for more command identifiers than one
will ever need (eg. 256).
The new flags are used to specify if the command should be processed
as an extended one or a legacy one. While designing the new command
format, care was taken to make usage of flags itself extensible.
Using high order bits of the commands field ensure that newer
libibverbs on older kernel will properly fail when trying to call
extended commands. On the other hand, older libibverbs on newer kernel
will never be able to issue calls to extended commands.
The extended command header includes the optional response pointer so
that output buffer length and output buffer pointer are located
together in the command, allowing proper parameters checking. This
should make implementing functions easier and safer.
Additionally the extended header ensure 64bits alignment, while making
all sizes multiple of 8 bytes, extending the maximum buffer size:
legacy extended
Maximum command buffer: 256KBytes 1024KBytes (512KBytes + 512KBytes)
Maximum response buffer: 256KBytes 1024KBytes (512KBytes + 512KBytes)
For the purpose of doing proper buffer size accounting, the headers
size are no more taken in account in "in_words".
One of the odds of the current extensible infrastructure, reading
twice the "legacy" command header, is fixed by removing the "legacy"
command header from the extended command header: they are processed as
two different parts of the command: memory is read once and
information are not duplicated: it's making clear that's an extended
command scheme and not a different command scheme.
The proposed scheme will format input (command) and output (response)
buffers this way:
- command:
legacy header +
extended header +
command data (core + hw):
+----------------------------------------+
| flags | 00 00 | command |
| in_words | out_words |
+----------------------------------------+
| response |
| response |
| provider_in_words | provider_out_words |
| padding |
+----------------------------------------+
| |
. <uverbs input> .
. (in_words * 8) .
| |
+----------------------------------------+
| |
. <provider input> .
. (provider_in_words * 8) .
| |
+----------------------------------------+
- response, if present:
+----------------------------------------+
| |
. <uverbs output space> .
. (out_words * 8) .
| |
+----------------------------------------+
| |
. <provider output space> .
. (provider_out_words * 8) .
| |
+----------------------------------------+
The overall design is to ensure that the extensible infrastructure is
itself extensible while begin more reliable with more input and bound
checking.
Note:
The unused field in the extended header would be perfect candidate to
hold the command "comp_mask" (eg. bit field used to handle
compatibility). This was suggested by Roland Dreier in a previous
review[2]. But "comp_mask" field is likely to be present in the uverb
input and/or provider input, likewise for the response, as noted by
Matan Barak[3], so it doesn't make sense to put "comp_mask" in the
header.
[1]:
http://marc.info/?i=CAL1RGDWxmM17W2o_era24A-TTDeKyoL6u3NRu_=t_dhV_ZA9MA@mail.gmail.com
[2]:
http://marc.info/?i=CAL1RGDXJtrc849M6_XNZT5xO1+ybKtLWGq6yg6LhoSsKpsmkYA@mail.gmail.com
[3]:
http://marc.info/?i=525C1149.6000701@mellanox.com
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Link: http://marc.info/?i=cover.1383773832.git.ydroneaud@opteya.com
[ Convert "ret ? ret : 0" to the equivalent "ret". - Roland ]
Signed-off-by: Roland Dreier <roland@purestorage.com>
The structure holding any types of flow_spec is of no use to
userspace. It would be wrong for userspace to do:
struct ib_uverbs_flow_spec flow_spec;
flow_spec.type = IB_FLOW_SPEC_TCP;
flow_spec.size = sizeof(flow_spec);
Instead, userspace should use the dedicated flow_spec structure for
- Ethernet : struct ib_uverbs_flow_spec_eth,
- IPv4 : struct ib_uverbs_flow_spec_ipv4,
- TCP/UDP : struct ib_uverbs_flow_spec_tcp_udp.
In other words, struct ib_uverbs_flow_spec is a "virtual" data
structure that can only be use by the kernel as an alias to the other.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Link: http://marc.info/?i=cover.1383773832.git.ydroneaud@opteya.com
Signed-off-by: Roland Dreier <roland@purestorage.com>
This patch adds "flow" prefix to most of data structure added as part
of commit 436f2ad05a ("IB/core: Export ib_create/destroy_flow through
uverbs") to keep those names in sync with the data structures added in
commit 319a441d13 ("IB/core: Add receive flow steering support").
It's just a matter of translating 'ib_flow' to 'ib_uverbs_flow'.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Link: http://marc.info/?i=cover.1383773832.git.ydroneaud@opteya.com
Signed-off-by: Roland Dreier <roland@purestorage.com>
Commit 436f2ad05a ("IB/core: Export ib_create/destroy_flow through
uverbs") added public data structures to support receive flow
steering. The new structs are not following the 'uverbs' pattern:
they're lacking the common prefix 'ib_uverbs'.
This patch replaces ib_kern prefix by ib_uverbs.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Link: http://marc.info/?i=cover.1383773832.git.ydroneaud@opteya.com
Signed-off-by: Roland Dreier <roland@purestorage.com>
This patch fixes the following issues:
1. Unneeded checks were removed
2. Removed the fixed size out of flow_attr.size, thus simplifying the checks.
3. Remove a 32bit hole on 64bit systems with strict alignment in
struct ib_kern_flow_att by adding a reserved field.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
This typedef is unnecessary and should just be removed.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Commit 3e6628c4b3 ("idr: introduce idr_alloc_cyclic()") adds a new
idr_alloc_cyclic() routine and converts several of these users to it.
This is just a missed one - add it.
Signed-off-by: Zhao Hongjiang <zhaohongjiang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Pull trivial tree updates from Jiri Kosina:
"Usual earth-shaking, news-breaking, rocket science pile from
trivial.git"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (23 commits)
doc: usb: Fix typo in Documentation/usb/gadget_configs.txt
doc: add missing files to timers/00-INDEX
timekeeping: Fix some trivial typos in comments
mm: Fix some trivial typos in comments
irq: Fix some trivial typos in comments
NUMA: fix typos in Kconfig help text
mm: update 00-INDEX
doc: Documentation/DMA-attributes.txt fix typo
DRM: comment: `halve' -> `half'
Docs: Kconfig: `devlopers' -> `developers'
doc: typo on word accounting in kprobes.c in mutliple architectures
treewide: fix "usefull" typo
treewide: fix "distingush" typo
mm/Kconfig: Grammar s/an/a/
kexec: Typo s/the/then/
Documentation/kvm: Update cpuid documentation for steal time and pv eoi
treewide: Fix common typo in "identify"
__page_to_pfn: Fix typo in comment
Correct some typos for word frequency
clk: fixed-factor: Fix a trivial typo
...
When creating a CQ, we must use mlx5 adapter page shift.
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Move the check on max supported CQEs after the final number of entries is
evaluated.
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
The value of the local variable index is never used in reg_mr_callback().
Signed-off-by: Eli Cohen <eli@mellanox.com>
[ Remove now-unused variable delta too. - Roland ]
Signed-off-by: Roland Dreier <roland@purestorage.com>
Enforce the rule that when requesting remote write or atomic permissions, local
write must be indicated as well. See IB spec 11.2.8.2.
Spotted by: Hagay Abramovsky <hagaya@mellanox.com>
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
When calling get_sw_cqe() we need pass the consumer_index and not the
masked value. Failure to do so will cause incorrect result of
get_sw_cqe() possibly leading to endless loop.
This problem was reported and analyzed by Michael Rice from HP.
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
* lookup_one_len() really wants i_mutex held on directory.
* leaks galore - just mount ipathfs, then
cd /sys/bus/pci/drivers/qib_ib; echo *:*:*.* >unbind
on a box with that card present and try to umount ipathfs...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This patch avoids a duplicate iscsit_increment_maxcmdsn() call for
ISER_IB_RDMA_WRITE within isert_map_rdma() + isert_reg_rdma_frwr(),
which will already be occuring once during isert_put_datain() ->
iscsit_build_rsp_pdu() operation.
It also removes the local conn->stat_sn assignment + increment,
and changes the third parameter to iscsit_build_rsp_pdu() to
signal this should be done by iscsi_target_mode code.
Tested-by: Moussa Ba <moussaba@micron.com>
Cc: <stable@vger.kernel.org> # v3.10+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This patch changes isert_reg_rdma_frwr() to not use FRMR for single
dma entry requests from small I/Os, in order to avoid the associated
memory registration overhead.
Using DMA MR is sufficient here for the single dma entry requests,
and addresses a >= v3.12 performance regression.
Signed-off-by: Vu Pham <vu@mellanox.com>
Cc: <stable@vger.kernel.org> # v3.12+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
The dev variable is never assigned after being initialised.
Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Problem reported by Avneesh Pant <avneesh.pant@oracle.com>:
It looks like we are triggering a bug in RDMA CM/UCM interaction.
The bug specifically hits when we have an incoming connection
request and the connecting process dies BEFORE the passive end of
the connection can process the request i.e. it does not call
rdma_get_cm_event() to retrieve the initial connection event. We
were able to triage this further and have some additional
information now.
In the example below when P1 dies after issuing a connect request
as the CM id is being destroyed all outstanding connects (to P2)
are sent a reject message. We see this reject message being
received on the passive end and the appropriate CM ID created for
the initial connection message being retrieved in cm_match_req().
The problem is in the ucma_event_handler() code when this reject
message is delivered to it and the initial connect message itself
HAS NOT been delivered to the client. In fact the client has not
even called rdma_cm_get_event() at this stage so we haven't
allocated a new ctx in ucma_get_event() and updated the new
connection CM_ID to point to the new UCMA context.
This results in the reject message not being dropped in
ucma_event_handler() for the new connection request as the
(if (!ctx->uid)) block is skipped since the ctx it refers to is
the listen CM id context which does have a valid UID associated
with it (I believe the new CMID for the connection initially
uses the listen CMID -> context when it is created in
cma_new_conn_id). Thus the assumption that new events for a
connection can get dropped in ucma_event_handler() is incorrect
IF the initial connect request has not been retrieved in the
first case. We end up getting a CM Reject event on the listen CM
ID and our upper layer code asserts (in fact this event does not
even have the listen_id set as that only gets set up librdmacm
for connect requests).
The solution is to verify that the cm_id being reported in the event
is the same as the cm_id referenced by the ucma context. A mismatch
indicates that the ucma context corresponds to the listen. This fix
was validated by using a modified version of librdmacm that was able
to verify the problem and see that the reject message was indeed
dropped after this patch was applied.
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
This patch adds new rdma node and new rdma transport, and supporting
code used by Cisco's low latency driver called usNIC. usNIC uses its
own transport, distinct from IB and iWARP.
Signed-off-by: Upinder Malhi <umalhi@cisco.com>
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Assigning a value to itself is pointless.
Spotted with coverity, no hardware to test.
Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
The IB spec does not guarantee that the opcode is available in error
completions. Hence do not rely on it. See also commit 948d1e889e
("IB/srp: Introduce srp_handle_qp_err()").
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Cc: <stable@vger.kernel.org> # v3.8
Signed-off-by: Roland Dreier <roland@purestorage.com>
If SCSI commands are submitted with a SCSI request timeout that is
lower than the the IB RC timeout, it can happen that the SCSI error
handler has already started device recovery before transport layer
error handling starts. So it can happen that the SCSI error handler
tries to abort a SCSI command after it has been reset by
srp_rport_reconnect().
Tell the SCSI error handler that such commands have finished and that
it is not necessary to continue its recovery strategy for commands
that have been reset by srp_rport_reconnect().
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Remove an SRP target from the SRP target list before invoking the last
scsi_host_put() call. This change is necessary because that last put
frees the memory that holds the srp_target_port structure.
This patch prevents the following kernel oops:
RIP: 0010:[<ffffffff810b00d0>] __lock_acquire+0x500/0x1570
Call Trace:
[<ffffffff810b11e4>] lock_acquire+0xa4/0x120
[<ffffffff81531206>] _spin_lock+0x36/0x70
[<ffffffffa01b6d8f>] srp_remove_work+0xef/0x180 [ib_srp]
[<ffffffff8109125c>] worker_thread+0x21c/0x3d0
[<ffffffff81096e86>] kthread+0x96/0xa0
[<ffffffff8100c20a>] child_rip+0xa/0x20
Signed-off-by: Vu Pham <vuhuong@mellanox.com>
[ bvanassche - Modified path description and CC'ed stable. ]
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Currently, it's not possible to change queue depth for a device behind
SRP host. Sometimes, we need to adjust queue_depth for performance
reason (eg storage busy, we need lower queue_depth to avoid running
into SCSI error handler), so this patch add support for SRP driver.
Signed-off-by: Jack Wang <jinpu.wang@profitbricks.com>
Tested-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: David Dillow <dillowda@ornl.gov>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Certain storage configurations, e.g. a sufficiently large array of
hard disks in a RAID configuration, need a queue depth above 64 to
achieve optimal performance. Hence make the queue depth configurable.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: David Dillow <dillowda@ornl.gov>
Tested-by: Jack Wang <xjtuwjp@gmail.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
This patch does not change any functionality.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: David Dillow <dillowda@ornl.gov>
Cc: Roland Dreier <roland@purestorage.com>
Cc: Vu Pham <vu@mellanox.com>
Cc: Sebastian Riemer <sebastian.riemer@profitbricks.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
On an initiator system with multiple IB ports it is not yet possible
to figure out what the originating port of an SRP connection is. Hence
make the source GID available in sysfs.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: David Dillow <dillowda@ornl.gov>
Signed-off-by: Roland Dreier <roland@purestorage.com>
After a transport layer occurred, periodically try to reconnect
to the target until the dev_loss timer expires. Protect the
callback functions that can be invoked from inside the SCSI EH
against concurrent invocation with srp_reconnect_rport() via the
rport mutex. Change the default dev_loss_tmo from 60s into 600s
to give the reconnect mechanism a chance to kick in.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: David Dillow <dillowda@ornl.gov>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Add support for periodically reconnecting to an SRP target until
the dev_loss timer expires. After the tenth reconnection attempt,
gradually slow down subsequent reconnect attempts.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: David Dillow <dillowda@ornl.gov>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Start the reconnect timer, fast_io_fail timer and dev_loss timers if a
transport layer error occurs.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: David Dillow <dillowda@ornl.gov>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Enable fast_io_fail_tmo and dev_loss_tmo functionality for the IB SRP
initiator. Add kernel module parameters that allow to specify default
values for these parameters.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: David Dillow <dillowda@ornl.gov>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Keep the rport data structure around after srp_remove_host() has
finished until cleanup of the IB transport layer has finished
completely. This is necessary because later patches use the rport
pointer inside the queuecommand callback. Without this patch
accessing the rport from inside a queuecommand callback is racy
because srp_remove_host() must be invoked before scsi_remove_host()
and because the queuecommand callback could get invoked after
srp_remove_host() has finished. In other words, without this patch
the queuecommand callback can get invoked after the rport data
structure has been freed.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: David Dillow <dillowda@ornl.gov>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Allow the InfiniBand RC retry count to be configured by the user as an
option in the target login string. Reducing this retry count allows to
reduce the path failover time.
Signed-off-by: Vu Pham <vu@mellanox.com>
[ bvanassche: Rewrote patch description / changed default retry count ]
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: David Dillow <dillowda@ornl.gov>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Commit 7fac33014f54("IB/qib: checkpatch fixes") was overzealous in
removing a simple_strtoul for a parse routine, setup_txselect(). That
routine is required to handle a multi-value string.
Unwind that aspect of the fix.
Cc: <stable@vger.kernel.org>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Convert __attribute__ ((packed)) to __packed.
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
qib_user_sdma_queue_pkts() gets called with mmap_sem held for
writing. Except for get_user_pages() deep down in
qib_user_sdma_pin_pages() we don't seem to need mmap_sem at all. Even
more interestingly the function qib_user_sdma_queue_pkts() (and also
qib_user_sdma_coalesce() called somewhat later) call copy_from_user()
which can hit a page fault and we deadlock on trying to get mmap_sem
when handling that fault.
So just make qib_user_sdma_pin_pages() use get_user_pages_fast() and
leave mmap_sem locking for mm.
This deadlock has actually been observed in the wild when the node
is under memory pressure.
Cc: <stable@vger.kernel.org>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Roland Dreier <roland@purestorage.com>
ipath_user_sdma_queue_pkts() gets called with mmap_sem held for
writing. Except for get_user_pages() deep down in
ipath_user_sdma_pin_pages() we don't seem to need mmap_sem at all.
Even more interestingly the function ipath_user_sdma_queue_pkts() (and
also ipath_user_sdma_coalesce() called somewhat later) call
copy_from_user() which can hit a page fault and we deadlock on trying
to get mmap_sem when handling that fault. So just make
ipath_user_sdma_pin_pages() use get_user_pages_fast() and leave
mmap_sem locking for mm.
This deadlock has actually been observed in the wild when the node
is under memory pressure.
Cc: <stable@vger.kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
[ Merged in fix for call to get_user_pages_fast from Tetsuo Handa
<penguin-kernel@I-love.SAKURA.ne.jp>. - Roland ]
Signed-off-by: Roland Dreier <roland@purestorage.com>
Remove the redundant check of comparing if a 32-bit value is greater
than 0xffffffffULL.
Reported by Dan Carpenter.
Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
1) ocrdma_remove_free() is called from a call_rcu callback funtion
context, which can be a bottom-half context. So the code in
ocrdma_remove_free should not sleep.
But ocrdma_cleanup_hw() can sleep, So move it ocrdma_remove()
instead of ocrdma_remove_free.
2) Fix a couple of kbuild test robot warnings.
Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
We recently added a cap on "max_wqe_allocated" in 43a6b4025c
('RDMA/ocrdma: Create IRD queue fix').
My static checker complains that the cap has a problem because it
casts large values to negative. "attrs->cap.max_send_wr" is a u32.
It comes from the user, but it's capped in ocrdma_check_qp_params() so
it can't wrap here.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
The Connect-IB adapter has an inherent page size which equals 4K.
Define an new enum that equals the page shift and use it instead of
using the value 12 throughout the code.
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
RTS to RTS transition should allow update of alternate path.
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
mlx5_cur and mlx5_new cannot have negative values so remove the
redundant condition.
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
In mlx5_mr_cache_init() the size variable is not used so remove it to
avoid compiler warnings when running with make W=1.
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Connect-IB firmware requires 4K pages to be communicated with the
driver. This patch breaks larger pages to 4K units to enable support
for architectures utilizing larger page size, such as PowerPC. This
patch also fixes several places that referred to PAGE_SHIFT instead of
explicit 12 which is the inherent page shift on Connect-IB.
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
On destroy QP the driver walks over the relevant CQ and removes CQEs
reported for the destroyed QP. It also frees the related SRQ entry
without checking that this is actually an SRQ-related CQE. In case of
a CQ used for both send and receive QP, we could free SRQ entries for
send CQEs. This patch resolves this issue by verifying that this is a
SRQ related CQE by checking the SRQ number in the CQE is not zero.
Signed-off-by: Moshe Lazer <moshel@mellanox.com>
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Make use of destroy_srq_kernel() to clear SRQ resouces.
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Make sure not to overflow when reading the page list from struct
ib_fast_reg_page_list.
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Use asynchronous commands to execute up to eight concurrent create MR
commands. This is to fill memory caches faster so we keep consuming
from there. Also, increase timeout for shrinking caches to five
minutes.
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Verify that the value is non negative before rounding up to power of 2.
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
'op' is the already RDMA_NL_GET_OP() masked 'type'. No need to mask it again.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Reviewed-by: Yann Droneaud <ydroneaud@opteya.com>
Acked-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Currently, we don't copy the immediate data from the userspace struct
to the kernel one when UD messages are being sent.
This patch makes sure that the immediate data is set correctly.
Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Since commit 82dc3c63c6 ("net: introduce NAPI_POLL_WEIGHT")
netif_napi_add() produces an error message if a NAPI poll weight
greater than 64 is requested.
Use the standard NAPI weight.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
The driver starts the mcast_join task whenever the netdev interface is
UP without relation to the underlying IB port state.
Until the port state is ACTIVE all the join requests are irrelevant,
and the IB core returns -EINVAL. So the user will see errors such as:
"multicast join failed for ff12:401b:... , status -22".
Instead, have ipoib_mcast_join_task() return when the port is not active.
It will be called again when the port state is changed and the
low-level driver triggers the IB_EVENT_PORT_ACTIVE event or the
IB_EVENT_CLIENT_REREGISTER event.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
The path_rec_completion() callback may be invoked asynchronously even
at the middle of "driver uninit" process. This can lead to scheduling
a task that tries to touch members of the priv object that are no
longer valid. For example the function cm_create_tx_qp can attempt to
create qp with no valid priv->pd object.
The following crash is one of the results:
RIP: 0010:[<ffffffffa021bb47>] [<ffffffffa021bb47>] ipoib_cm_create_tx_qp+0x57/0x90 [ib_ipoib]
Process ipoib (pid: 5916, threadinfo ffff8803786e4000, task ffff8804150e1500)
Stack:
Call Trace:
[<ffffffff81309ef0>] ? get_random_bytes+0x20/0x30
[<ffffffffa021be2a>] ipoib_cm_tx_init+0xca/0x340 [ib_ipoib]
[<ffffffffa021f765>] ipoib_cm_tx_start+0x215/0x3f0 [ib_ipoib]
[<ffffffffa021f550>] ? ipoib_cm_tx_start+0x0/0x3f0 [ib_ipoib]
[<ffffffff8108b2b0>] worker_thread+0x170/0x2a0
[<ffffffff81090bf0>] ? autoremove_wake_function+0x0/0x40
[<ffffffff8108b140>] ? worker_thread+0x0/0x2a0
[<ffffffff81090886>] kthread+0x96/0xa0
[<ffffffff8100c14a>] child_rip+0xa/0x20
[<ffffffff810907f0>] ? kthread+0x0/0xa0
[<ffffffff8100c140>] ? child_rip+0x0/0x20
Fix that by flushing all pending path queries at this point.
Signed-off-by: Alex Markuze <markuze@mellanox.com>
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
The driver should avoid calling ib_sa_free_multicast on the mcast->mc
object until it finishes its initialization state. Otherwise we can
crash when ipoib_mcast_dev_flush() attempts to use the uninitialized
multicast object.
Instead, only call wait_for_completion() for multicast entries that
started the join process, meaning that ib_sa_join_multicast() finished.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
The driver should not flush the whole workqueue when only one work (the
pkey poll one) needs to be cancelled. Use cancel_delayed_work_sync()
instead.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
When ipoib interface is going down it takes all of its children with
it, under mutex.
For each child, dev_change_flags() is called. That function calls
ipoib_stop() via the ndo, and causes flush of the workqueue.
Sometimes in the workqueue an __ipoib_dev_flush work() is waiting and
when invoked tries to get the same mutex, which leads to a deadlock,
as seen below.
The solution is to switch to rw-sem instead of mutex.
The deadlock:
[11028.165303] [<ffffffff812b0977>] ? vgacon_scroll+0x107/0x2e0
[11028.171844] [<ffffffff814eaac5>] schedule_timeout+0x215/0x2e0
[11028.178465] [<ffffffff8105a5c3>] ? perf_event_task_sched_out+0x33/0x80
[11028.185962] [<ffffffff814ea743>] wait_for_common+0x123/0x180
[11028.192491] [<ffffffff8105fa40>] ? default_wake_function+0x0/0x20
[11028.199504] [<ffffffff814ea85d>] wait_for_completion+0x1d/0x20
[11028.206224] [<ffffffff8108b4f1>] flush_cpu_workqueue+0x61/0x90
[11028.212948] [<ffffffff8108b5a0>] ? wq_barrier_func+0x0/0x20
[11028.219375] [<ffffffff8108bfc4>] flush_workqueue+0x54/0x80
[11028.225712] [<ffffffffa05a0576>] ipoib_mcast_stop_thread+0x66/0x90 [ib_ipoib]
[11028.233988] [<ffffffffa059ccea>] ipoib_ib_dev_down+0x6a/0x100 [ib_ipoib]
[11028.241678] [<ffffffffa059849a>] ipoib_stop+0x8a/0x140 [ib_ipoib]
[11028.248692] [<ffffffff8142adf1>] dev_close+0x71/0xc0
[11028.254447] [<ffffffff8142a631>] dev_change_flags+0xa1/0x1d0
[11028.261062] [<ffffffffa059851b>] ipoib_stop+0x10b/0x140 [ib_ipoib]
[11028.268172] [<ffffffff8142adf1>] dev_close+0x71/0xc0
[11028.273922] [<ffffffff8142a631>] dev_change_flags+0xa1/0x1d0
[11028.280452] [<ffffffff8148f20b>] devinet_ioctl+0x5eb/0x6a0
[11028.286786] [<ffffffff814903b8>] inet_ioctl+0x88/0xa0
[11028.292633] [<ffffffff8141591a>] sock_ioctl+0x7a/0x280
[11028.298576] [<ffffffff81189012>] vfs_ioctl+0x22/0xa0
[11028.304326] [<ffffffff81140540>] ? unmap_region+0x110/0x130
[11028.310756] [<ffffffff811891b4>] do_vfs_ioctl+0x84/0x580
[11028.316897] [<ffffffff81189731>] sys_ioctl+0x81/0xa0
and
11028.017533] [<ffffffff8105a5c3>] ? perf_event_task_sched_out+0x33/0x80
[11028.025030] [<ffffffff8100bb8e>] ? apic_timer_interrupt+0xe/0x20
[11028.031945] [<ffffffff814eb2ae>] __mutex_lock_slowpath+0x13e/0x180
[11028.039053] [<ffffffff814eb14b>] mutex_lock+0x2b/0x50
[11028.044910] [<ffffffffa059f7e7>] __ipoib_ib_dev_flush+0x37/0x210 [ib_ipoib]
[11028.052894] [<ffffffffa059fa00>] ? ipoib_ib_dev_flush_light+0x0/0x20 [ib_ipoib]
[11028.061363] [<ffffffffa059fa17>] ipoib_ib_dev_flush_light+0x17/0x20 [ib_ipoib]
[11028.069738] [<ffffffff8108b120>] worker_thread+0x170/0x2a0
[11028.076068] [<ffffffff81090990>] ? autoremove_wake_function+0x0/0x40
[11028.083374] [<ffffffff8108afb0>] ? worker_thread+0x0/0x2a0
[11028.089709] [<ffffffff81090626>] kthread+0x96/0xa0
[11028.095266] [<ffffffff8100c0ca>] child_rip+0xa/0x20
[11028.100921] [<ffffffff81090590>] ? kthread+0x0/0xa0
[11028.106573] [<ffffffff8100c0c0>] ? child_rip+0x0/0x20
[11028.112423] INFO: task ifconfig:23640 blocked for more than 120 seconds.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Change CM skb memory allocation to use GFP_KERNEL when possible.
During device init there's no need to use GFP_ATOMIC when allocating
memory for the CM skbs -- use GFP_KERNEL instead.
Signed-off-by: Tal Alon <talal@mellanox.com>
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
If napi has never been enabled when calling ipoib_ib_dev_stop, a
kernel crash occurs, because the verbs layer completion handler
(ipoib_ib_completion) calls napi_schedule unconditionally.
If the napi structure passed in the napi_schedule call has not
been initialized, napi will crash.
The cleanest solution is to simply enable napi before calling
ipoib_ib_dev_stop in the dev_open error flow. (dev_stop then
immediately disables napi).
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Physical addresses may be wider than virtual addresses (e.g. on i386
with PAE) and must not be formatted with %p.
Compile-tested only.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Roland Dreier <roland@purestorage.com>
As a simple optimization that should speed up the vast majority of
connect attemps on IB devices, when we are searching for the GID of an
incoming connection in the cached GID lists of devices, search the
device that received the incoming connection request first. If we
don't find it there, then move on to other devices.
This reduces the time to perform 10,000 connections considerably.
Prior to this patch, a bad run of cmtime would look like this:
connect : 12399.26 12351.10 8609.00 1239.93
With this patch, it looks more like this:
connect : 5864.86 5799.80 8876.00 586.49
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
The cma_acquire_dev function was changed by commit 3c86aa70bf
("RDMA/cm: Add RDMA CM support for IBoE devices") to use find_gid_port()
because multiport devices might have either IB or IBoE formatted gids.
The old function assumed that all ports on the same device used the
same GID format.
However, when it was changed to use find_gid_port(), we inadvertently
lost usage of the GID cache. This turned out to be a very costly
change. In our testing, each iteration through each index of the GID
table takes roughly 35us. When you have multiple devices in a system,
and the GID you are looking for is on one of the later devices, the
code loops through all of the GID indexes on all of the early devices
before it finally succeeds on the target device. This pathological
search behavior combined with 35us per GID table index retrieval
results in results such as the following from the cmtime application
that's part of the latest librdmacm git repo:
ib1:
step total ms max ms min us us / conn
create id : 29.42 0.04 1.00 2.94
bind addr : 186705.66 19.00 18556.00 18670.57
resolve addr : 41.93 9.68 619.00 4.19
resolve route: 486.93 0.48 101.00 48.69
create qp : 4021.95 6.18 330.00 402.20
connect : 68350.39 68588.17 24632.00 6835.04
disconnect : 1460.43 252.65-1862269.00 146.04
destroy : 41.16 0.04 2.00 4.12
ib0:
step total ms max ms min us us / conn
create id : 28.61 0.68 1.00 2.86
bind addr : 2178.86 2.95 201.00 217.89
resolve addr : 51.26 16.85 845.00 5.13
resolve route: 620.08 0.43 92.00 62.01
create qp : 3344.40 6.36 273.00 334.44
connect : 6435.99 6368.53 7844.00 643.60
disconnect : 5095.38 321.90 757.00 509.54
destroy : 37.13 0.02 2.00 3.71
Clearly, both the bind address and connect operations suffer
a huge penalty for being anything other than the default
GID on the first port in the system.
After applying this patch, the numbers now look like this:
ib1:
step total ms max ms min us us / conn
create id : 30.15 0.03 1.00 3.01
bind addr : 80.27 0.04 7.00 8.03
resolve addr : 43.02 13.53 589.00 4.30
resolve route: 482.90 0.45 100.00 48.29
create qp : 3986.55 5.80 330.00 398.66
connect : 7141.53 7051.29 5005.00 714.15
disconnect : 5038.85 193.63 918.00 503.88
destroy : 37.02 0.04 2.00 3.70
ib0:
step total ms max ms min us us / conn
create id : 34.27 0.05 1.00 3.43
bind addr : 26.45 0.04 1.00 2.64
resolve addr : 38.25 10.54 760.00 3.82
resolve route: 604.79 0.43 97.00 60.48
create qp : 3314.95 6.34 273.00 331.49
connect : 12399.26 12351.10 8609.00 1239.93
disconnect : 5096.76 270.72 1015.00 509.68
destroy : 37.10 0.03 2.00 3.71
It's worth noting that we still suffer a bit of a penalty on
connect to the wrong device, but the penalty is much less than
it used to be. Follow on patches deal with this penalty.
Many thanks to Neil Horman for helping to track the source of
slow function that allowed us to track down the fact that
the original patch I mentioned above backed out cache usage
and identify just how much that impacted the system.
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
To guarantee that all unused fields in all FW commands for both inboxes
and outboxes are zeroed out, initialize the mailbox buffer to all zeroes.
This is especially important for SRIOV comm-channel virtual commands
(such as QUERY_FUNC_CAP), where if new fields are added to support new
features, the driver can depend on older kernels passing zeroes in these
fields.
In addition to zeroing out the mailbox buffer at allocation time, all
(now unnecessary) calls to memset by the callers of
mlx4_alloc_cmd_mailbox() are removed.
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On top of commit 366cddb40 "IB/rdma_cm: TOS <=> UP mapping for IBoE", add
support for case vlan egress map is used.
When the IBoE session is being set over a vlan, inherit the socket priority
to vlan priority mapping which was configured for the vlan device egress map.
Signed-off-by: Eyal Perry <eyalpe@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now with percpu refcounting for se_lun in place, go ahead and drop
the legacy per se_cmd accounting for se_lun shutdown.
This includes __transport_clear_lun_from_sessions(), the associated
transport_lun_wait_for_tasks() logic, along with a handful of now
unused se_cmd structure members and ->transport_state bits.
Cc: Kent Overstreet <kmo@daterainc.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This patch adds support for completion interrupt coalescing that
allows only every ISERT_COMP_BATCH_COUNT (8) to set IB_SEND_SIGNALED,
thus avoiding completion interrupts for every posted iser_tx_desc.
The batch processing is done using a per isert_conn llist that once
IB_SEND_SIGNALED has been set is saved to tx_desc->comp_llnode_batch,
and completion processing of previously posted iser_tx_descs is done
in a single shot from within isert_send_completion() code.
Note this is only done for response PDUs from ISCSI_OP_SCSI_CMD, and
all other control type of PDU responses will force an implicit batch
drain to occur.
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Kent Overstreet <kmo@daterainc.com>
Cc: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This is step #1 for implementing SRIOV resource quotas for VFs.
Quotas are implemented per resource type for VFs and the PF, to prevent
any entity from simply grabbing all the resources for itself and leaving
the other entities unable to obtain such resources.
Resources which are allocated using quotas: QPs, CQs, SRQs, MPTs, MTTs, MAC,
VLAN, and Counters.
The quota system works as follows:
Each entity (VF or PF) is given a max number of a given resource (its quota),
and a guaranteed minimum number for each resource (starvation prevention).
For QPs, CQs, SRQs, MPTs and MTTs:
50% of the available quantity for the resource is divided equally among
the PF and all the active VFs (i.e., the number of VFs in the mlx4_core module
parameter "num_vfs"). This 50% represents the "guaranteed minimum" pool.
The other 50% is the "free pool", allocated on a first-come-first-serve basis.
For each VF/PF, resources are first allocated from its "guaranteed-minimum"
pool. When that pool is exhausted, the driver attempts to allocate from
the resource "free-pool".
The quota (i.e., max) for the VFs and the PF is:
The free-pool amount (50% of the real max) + the guaranteed minimum
For MACs:
Guarantee 2 MACs per VF/PF per port. As a result, since we have only
128 MACs per port, reduce the allowable number of VFs from 64 to 63.
Any remaining MACs are put into a free pool.
For VLANs:
For the PF, the per-port quota is 128 and guarantee is 64
(to allow the PF to register at least a VLAN per VF in VST mode).
For the VFs, the per-port quota is 64 and the guarantee is 0.
We assume that VGT VFs are trusted not to abuse the VLAN resource.
For Counters:
For all functions (PF and VFs), the quota is 128 and the guarantee is 0.
In this patch, we define the needed structures, which are added to the
resource-tracker struct. In addition, we do initialization
for the resource quota, and adjust the query_device response to use quotas
rather than resource maxima.
As part of the implementation, we introduce a new field in
mlx4_dev: quotas. This field holds the resource quotas used
to report maxima to the upper layers (ib_core, via query_device).
The HCA maxima of these values are passed to the VFs (via
QUERY_HCA) so that they may continue to use these in handling
QPs, CQs, SRQs and MPTs.
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Conflicts:
drivers/net/ethernet/emulex/benet/be.h
drivers/net/netconsole.c
net/bridge/br_private.h
Three mostly trivial conflicts.
The net/bridge/br_private.h conflict was a function signature (argument
addition) change overlapping with the extern removals from Joe Perches.
In drivers/net/netconsole.c we had one change adjusting a printk message
whilst another changed "printk(KERN_INFO" into "pr_info(".
Lastly, the emulex change was a new inline function addition overlapping
with Joe Perches's extern removals.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull SCSI target fixes from Nicholas Bellinger:
"Here are the outstanding target pending fixes for v3.12-rc7.
This includes a number of EXTENDED_COPY related fixes as a result of
Thomas and Doug's continuing testing and feedback.
Also included is an important vhost/scsi fix that addresses a long
standing issue where the 'write' parameter for get_user_pages_fast()
was incorrectly set for virtio-scsi WRITEs -> DMA_TO_DEVICE, and not
for virtio-scsi READs -> DMA_FROM_DEVICE.
This resulted in random userspace segfaults and other unpleasantness
on KVM host, and unfortunately has been an issue since the initial
merge of vhost/scsi in v3.6. This patch is CC'ed to stable, along
with two other less critical items"
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
vhost/scsi: Fix incorrect usage of get_user_pages_fast write parameter
target/pscsi: fix return value check
target: Fail XCOPY for non matching source + destination block_size
target: Generate failure for XCOPY I/O with non-zero scsi_status
target: Add missing XCOPY I/O operation sense_buffer
iser-target: check device before dereferencing its variable
target: Return an error for WRITE SAME with ANCHOR==1
target: Fix assignment of LUN in tracepoints
target: Reject EXTENDED_COPY when emulate_3pc is disabled
target: Allow non zero ListID in EXTENDED_COPY parameter list
target: Make target_do_xcopy failures return INVALID_PARAMETER_LIST
This patch changes isert_connect_release() to correctly check for
the existence struct isert_device *device before checking for
isert_device->use_frwr.
Signed-off-by: Vu Pham <vu@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Conflicts:
drivers/net/usb/qmi_wwan.c
include/net/dst.h
Trivial merge conflicts, both were overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
The create_flow/destroy_flow uverbs and the associated extensions to
the user-kernel verbs ABI are under review and are too experimental to
freeze at this point.
So userspace is not exposed to experimental features and an uinstable
ABI, temporarily disable this for v3.12 (with a Kconfig option behind
staging to reenable it if desired).
The feature will be enabled after proper cleanup for v3.13.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Link: http://marc.info/?i=cover.1381351016.git.ydroneaud@opteya.com
Link: http://marc.info/?i=cover.1381177342.git.ydroneaud@opteya.com
[ Add a Kconfig option to reenable these verbs. - Roland ]
Signed-off-by: Roland Dreier <roland@purestorage.com>
one trivial semicolon cleanup.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=0XuA
-----END PGP SIGNATURE-----
Merge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
Pull infiniband updates from Roland Dreier:
"Last batch of IB changes for 3.12: many mlx5 hardware driver fixes
plus one trivial semicolon cleanup"
* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
IB: Remove unnecessary semicolons
IB/mlx5: Ensure proper synchronization accessing memory
IB/mlx5: Fix alignment of reg umr gather buffers
IB/mlx5: Fix eq names to display nicely in /proc/interrupts
mlx5: Fix error code translation from firmware to driver
IB/mlx5: Fix opt param mask according to firmware spec
mlx5: Fix opt param mask for sq err to rts transition
IB/mlx5: Disable atomic operations
mlx5: Fix layout of struct mlx5_init_seg
mlx5: Keep polling to reclaim pages while any returned
IB/mlx5: Avoid async events on invalid port number
IB/mlx5: Decrease memory consumption of mr caches
mlx5: Remove checksum on command interface commands
IB/mlx5: Fix memory leak in mlx5_ib_create_srq
IB/mlx5: Flush cache workqueue before destroying it
IB/mlx5: Fix send work queue size calculation
Call mlx5_ib_populate_pas() before mapping the DMA buffer to ensure
the hardware reads the values written by the CPU.
Found by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
The hardware requires that gather buffers for UMR work requests be
aligned to 2K.
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
It's helpful for a driver to put the pci slot name in its interrupt
names, so /proc/interrupts will show the pci slot of the device.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Failed to configure opt mask to configure rre from init to rtr.
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Currently Atomic operations don't work properly. Disable them for the
time being.
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
On a single ported Connect-IB, its possible for the firmware to issue
events on the non-existing 2nd port. Make sure to ignore events
generated for such ports.
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Change the logic so we do not allocate memory nor map the device
before actually posting to the REG_UMR QP. In addition, unmap and free
the memory after we get completion.
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
The patch fixes the rollback in case of failure in creating SRQ.
Signed-off-by: Moshe Lazer <moshel@mellanox.com>
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Destroying the workqueue without flushing it first can lead to a case
in which the kernel tries to push a delayed work to the workqueue
which does not exist anymore.
Signed-off-by: Moshe Lazer <moshel@mellanox.com>
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
1. Make sure wqe_cnt does not exceed the limit published by firmware.
2. There is no requirement that the number of outstanding work
requests will be a power of two. Remove the ilog2 in the
calculation of sq.max_post to fix that.
3. Add case for IB_QPT_XRC_TGT in sq_overhead and return 0 as XRC
target QPs do not have a send queue.
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
The callers of qib_tune_pcie_caps() and qib_tune_pcie_coalesce() don't
check the return values, so this patch drops the return values altogether.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
The SRP specification requires:
"Response data shall be provided in any SRP_RSP response that is sent in
response to an SRP_TSK_MGMT request (see 6.7). The information in the
RSP_CODE field (see table 24) shall indicate the completion status of
the task management function."
So fix this to avoid the SRP initiator interprets task management functions
that succeeded as failed.
Signed-off-by: Jack Wang <jinpu.wang@profitbricks.com>
Cc: stable@vger.kernel.org # 3.3+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This patch fixes a bug where ib_destroy_cm_id() was incorrectly being called
after srpt_destroy_ch_ib() had destroyed the active QP.
This would result in the following failed SRP_LOGIN_REQ messages:
Received SRP_LOGIN_REQ with i_port_id 0x0:0x2590ffff1762bd, t_port_id 0x2c903009f8f40:0x2c903009f8f40 and it_iu_len 260 on port 1 (guid=0xfe80000000000000:0x2c903009f8f41)
Received SRP_LOGIN_REQ with i_port_id 0x0:0x2590ffff1758f9, t_port_id 0x2c903009f8f40:0x2c903009f8f40 and it_iu_len 260 on port 2 (guid=0xfe80000000000000:0x2c903009f8f42)
Received SRP_LOGIN_REQ with i_port_id 0x0:0x2590ffff175941, t_port_id 0x2c903009f8f40:0x2c903009f8f40 and it_iu_len 260 on port 2 (guid=0xfe80000000000000:0x2c90300a3cfb2)
Received SRP_LOGIN_REQ with i_port_id 0x0:0x2590ffff176299, t_port_id 0x2c903009f8f40:0x2c903009f8f40 and it_iu_len 260 on port 1 (guid=0xfe80000000000000:0x2c90300a3cfb1)
mlx4_core 0000:84:00.0: command 0x19 failed: fw status = 0x9
rejected SRP_LOGIN_REQ because creating a new RDMA channel failed.
Received SRP_LOGIN_REQ with i_port_id 0x0:0x2590ffff176299, t_port_id 0x2c903009f8f40:0x2c903009f8f40 and it_iu_len 260 on port 1 (guid=0xfe80000000000000:0x2c90300a3cfb1)
mlx4_core 0000:84:00.0: command 0x19 failed: fw status = 0x9
rejected SRP_LOGIN_REQ because creating a new RDMA channel failed.
Received SRP_LOGIN_REQ with i_port_id 0x0:0x2590ffff176299, t_port_id 0x2c903009f8f40:0x2c903009f8f40 and it_iu_len 260 on port 1 (guid=0xfe80000000000000:0x2c90300a3cfb1)
Reported-by: Navin Ahuja <navin.ahuja@saratoga-speed.com>
Cc: stable@vger.kernel.org # 3.3+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
- Move sysctl_local_ports from a global variable into struct netns_ipv4.
- Modify inet_get_local_port_range to take a struct net, and update all
of the callers.
- Move the initialization of sysctl_local_ports into
sysctl_net_ipv4.c:ipv4_sysctl_init_net from inet_connection_sock.c
v2:
- Ensure indentation used tabs
- Fixed ip.h so it applies cleanly to todays net-next
v3:
- Compile fixes of strange callers of inet_get_local_port_range.
This patch now successfully passes an allmodconfig build.
Removed manual inlining of inet_get_local_port_range in ipv4_local_port_range
Originally-by: Samya <samya@twitter.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Refactor qib_tune_pcie_caps(). Use pcie_get_mps(), pcie_set_mps(),
pcie_get_readrq(), and pcie_set_readrq() to simplify the code. The PCI
core caches the "PCIe Max Payload Size Supported" in pci_dev->pcie_mpss,
so use that instead of pcie_capability_read_word(). Remove the unused
val2fld() and fld2val().
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Use pci_is_root_bus() instead of "if (bus->parent)" statement
for better readability.
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
After the last architecture switched to generic hard irqs the config
options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code
for !CONFIG_GENERIC_HARDIRQS can be removed.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Pull SCSI target updates from Nicholas Bellinger:
"Lots of activity again this round for I/O performance optimizations
(per-cpu IDA pre-allocation for vhost + iscsi/target), and the
addition of new fabric independent features to target-core
(COMPARE_AND_WRITE + EXTENDED_COPY).
The main highlights include:
- Support for iscsi-target login multiplexing across individual
network portals
- Generic Per-cpu IDA logic (kent + akpm + clameter)
- Conversion of vhost to use per-cpu IDA pre-allocation for
descriptors, SGLs and userspace page pointer list
- Conversion of iscsi-target + iser-target to use per-cpu IDA
pre-allocation for descriptors
- Add support for generic COMPARE_AND_WRITE (AtomicTestandSet)
emulation for virtual backend drivers
- Add support for generic EXTENDED_COPY (CopyOffload) emulation for
virtual backend drivers.
- Add support for fast memory registration mode to iser-target (Vu)
The patches to add COMPARE_AND_WRITE and EXTENDED_COPY support are of
particular significance, which make us the first and only open source
target to support the full set of VAAI primitives.
Currently Linux clients are lacking upstream support to actually
utilize these primitives. However, with server side support now in
place for folks like MKP + ZAB working on the client, this logic once
reserved for the highest end of storage arrays, can now be run in VMs
on their laptops"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (50 commits)
target/iscsi: Bump versions to v4.1.0
target: Update copyright ownership/year information to 2013
iscsi-target: Bump default TCP listen backlog to 256
target: Fix >= v3.9+ regression in PR APTPL + ALUA metadata write-out
iscsi-target; Bump default CmdSN Depth to 64
iscsi-target: Remove unnecessary wait_for_completion in iscsi_get_thread_set
iscsi-target: Add thread_set->ts_activate_sem + use common deallocate
iscsi-target: Fix race with thread_pre_handler flush_signals + ISCSI_THREAD_SET_DIE
target: remove unused including <linux/version.h>
iser-target: introduce fast memory registration mode (FRWR)
iser-target: generalize rdma memory registration and cleanup
iser-target: move rdma wr processing to a shared function
target: Enable global EXTENDED_COPY setup/release
target: Add Third Party Copy (3PC) bit in INQUIRY response
target: Enable EXTENDED_COPY setup in spc_parse_cdb
target: Add support for EXTENDED_COPY copy offload emulation
target: Avoid non-existent tg_pt_gp_mem in target_alua_state_check
target: Add global device list for EXTENDED_COPY
target: Make helpers non static for EXTENDED_COPY command setup
target: Make spc_parse_naa_6h_vendor_specific non static
...
Update copyright ownership/year information for target-core,
loopback, iscsi-target, tcm_qla2xx, vhost and iser-target.
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This model was introduced in 00f7ec36c "RDMA/core: Add memory
management extensions support" and works when the IB device
supports the IB_DEVICE_MEM_MGT_EXTENSIONS capability.
Upon creating the isert device, ib_isert will test whether the HCA
supports FRWR. If supported then set the flag and assign
function pointers that handle fast registration and deregistration
of appropriate resources (fast_reg descriptors).
When new connection coming in, ib_isert will check frwr flag and
create frwr resouces, if fail to do it will switch back to
old model of using global dma key and turn off the frwr support.
Registration is done using posting IB_WR_FAST_REG_MR to the QP and
invalidations using posting IB_WR_LOCAL_INV.
Signed-off-by: Vu Pham <vu@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Current driver uses global dma key to register the memory pointed
by sg list provided by the target core.
This is the preparation step for adding more methods like fast
path memory registration, make the reg/unreg calls be function
pointers.
Signed-off-by: Vu Pham <vu@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
isert_put_datain() and isert_get_dataout() share a lot of code
in rdma wr processing, move this common code to a shared function.
Use isert_unmap_cmd to cleanup for RDMA_READ completion.
Remove duplicate field in isert_cmd and isert_rdma_wr structs
Change misc debug messages to track isert_cmd
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Vu Pham <vu@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This command converts iscsi/isert-target to use allocations based on
iscsit_transport->priv_size within iscsit_allocate_cmd(), instead of
using an embedded isert_cmd->iscsi_cmd.
This includes removing iscsit_transport->alloc_cmd() usage, along
with updating isert-target code to use iscsit_priv_cmd().
Also, remove left-over iscsit_transport->release_cmd() usage for
direct calls to iscsit_release_cmd(), and drop the now unused
lio_cmd_cache and isert_cmd_cache.
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: Kent Overstreet <kmo@daterainc.com>
Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
This patch updates iser-target code to support login negotiation
multi-plexing. This includes only using isert_conn->conn_login_comp
for the first login request PDU, pushing the subsequent processing
to iscsi_conn->login_work -> iscsi_target_do_login_rx(), and turning
isert_get_login_rx() into a NOP.
v3 changes:
- Drop unnecessary LOGIN_FLAGS_READ_ACTIVE bit set in
isert_rx_login_req()
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Pull trivial tree from Jiri Kosina:
"The usual trivial updates all over the tree -- mostly typo fixes and
documentation updates"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (52 commits)
doc: Documentation/cputopology.txt fix typo
treewide: Convert retrun typos to return
Fix comment typo for init_cma_reserved_pageblock
Documentation/trace: Correcting and extending tracepoint documentation
mm/hotplug: fix a typo in Documentation/memory-hotplug.txt
power: Documentation: Update s2ram link
doc: fix a typo in Documentation/00-INDEX
Documentation/printk-formats.txt: No casts needed for u64/s64
doc: Fix typo "is is" in Documentations
treewide: Fix printks with 0x%#
zram: doc fixes
Documentation/kmemcheck: update kmemcheck documentation
doc: documentation/hwspinlock.txt fix typo
PM / Hibernate: add section for resume options
doc: filesystems : Fix typo in Documentations/filesystems
scsi/megaraid fixed several typos in comments
ppc: init_32: Fix error typo "CONFIG_START_KERNEL"
treewide: Add __GFP_NOWARN to k.alloc calls with v.alloc fallbacks
page_isolation: Fix a comment typo in test_pages_isolated()
doc: fix a typo about irq affinity
...
- Large ocrdma HW driver update: add "fast register" work requests,
fixes, cleanups
- Add receive flow steering support for raw QPs
- Fix IPoIB neighbour race that leads to crash
- iSER updates including support for using "fast register" memory
registration
- IPv6 support for iWARP
- XRC transport fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=rabl
-----END PGP SIGNATURE-----
Merge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
Pull main batch of InfiniBand/RDMA changes from Roland Dreier:
- Large ocrdma HW driver update: add "fast register" work requests,
fixes, cleanups
- Add receive flow steering support for raw QPs
- Fix IPoIB neighbour race that leads to crash
- iSER updates including support for using "fast register" memory
registration
- IPv6 support for iWARP
- XRC transport fixes
* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (54 commits)
RDMA/ocrdma: Fix compiler warning about int/pointer size mismatch
IB/iser: Fix redundant pointer check in dealloc flow
IB/iser: Fix possible memory leak in iser_create_frwr_pool()
IB/qib: Move COUNTER_MASK definition within qib_mad.h header guards
RDMA/ocrdma: Fix passing wrong opcode to modify_srq
RDMA/ocrdma: Fill PVID in UMC case
RDMA/ocrdma: Add ABI versioning support
RDMA/ocrdma: Consider multiple SGES in case of DPP
RDMA/ocrdma: Fix for displaying proper link speed
RDMA/ocrdma: Increase STAG array size
RDMA/ocrdma: Dont use PD 0 for userpace CQ DB
RDMA/ocrdma: FRMA code cleanup
RDMA/ocrdma: For ERX2 irrespective of Qid, num_posted offset is 24
RDMA/ocrdma: Fix to work with even a single MSI-X vector
RDMA/ocrdma: Remove the MTU check based on Ethernet MTU
RDMA/ocrdma: Add support for fast register work requests (FRWR)
RDMA/ocrdma: Create IRD queue fix
IB/core: Better checking of userspace values for receive flow steering
IB/mlx4: Add receive flow steering support
IB/core: Export ib_create/destroy_flow through uverbs
...
up with PTR_ERR_OR_ZERO(), and replacing or fixing all the usages.
This has been sitting in linux-next for a whole cycle.
Thanks,
Rusty.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=LeaW
-----END PGP SIGNATURE-----
Merge tag 'PTR_RET-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull PTR_RET() removal patches from Rusty Russell:
"PTR_RET() is a weird name, and led to some confusing usage. We ended
up with PTR_ERR_OR_ZERO(), and replacing or fixing all the usages.
This has been sitting in linux-next for a whole cycle"
[ There are still some PTR_RET users scattered about, with some of them
possibly being new, but most of them existing in Rusty's tree too. We
have that
#define PTR_RET(p) PTR_ERR_OR_ZERO(p)
thing in <linux/err.h>, so they continue to work for now - Linus ]
* tag 'PTR_RET-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
GFS2: Replace PTR_RET with PTR_ERR_OR_ZERO
Btrfs: volume: Replace PTR_RET with PTR_ERR_OR_ZERO
drm/cma: Replace PTR_RET with PTR_ERR_OR_ZERO
sh_veu: Replace PTR_RET with PTR_ERR_OR_ZERO
dma-buf: Replace PTR_RET with PTR_ERR_OR_ZERO
drivers/rtc: Replace PTR_RET with PTR_ERR_OR_ZERO
mm/oom_kill: remove weird use of ERR_PTR()/PTR_ERR().
staging/zcache: don't use PTR_RET().
remoteproc: don't use PTR_RET().
pinctrl: don't use PTR_RET().
acpi: Replace weird use of PTR_RET.
s390: Replace weird use of PTR_RET.
PTR_RET is now PTR_ERR_OR_ZERO(): Replace most.
PTR_RET is now PTR_ERR_OR_ZERO
Fix:
drivers/infiniband/hw/ocrdma/ocrdma_verbs.c: In function 'ocrdma_build_fr':
>> drivers/infiniband/hw/ocrdma/ocrdma_verbs.c:1832:7: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
mr = (struct ocrdma_mr *)qp->dev->stag_arr[(hdr->lkey >> 8) &
^
drivers/infiniband/hw/ocrdma/ocrdma_verbs.c: In function 'ocrdma_alloc_frmr':
>> drivers/infiniband/hw/ocrdma/ocrdma_verbs.c:2661:64: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
dev->stag_arr[(mr->hwmr.lkey >> 8) & (OCRDMA_MAX_STAG - 1)] = (u64) mr;
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
This bug was discovered by Smatch static checker run by Dan Carpenter.
If in free_rx_descriptors(), rx_descs are not NULL then the iser
device is definately not NULL, so no need to check it before
dereferencing it.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Fix leak where desc is not being freed in error flows.
Signed-off-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Commit 36a8f01cd2 ("IB/qib: Add congestion control agent
implementation") caused statements to leak pass the header guard.
Fix this.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
In UMC case, driver needs to fill PVID in the address vector
template for UD traffic.
Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Add ABI versioning support between driver and userspace library.
Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
While posting inline DPP data, we are not considering multiple sges.
Fix this.
Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
1) Increase STAG Array size.
2) Max inline data size should be set to the same value
used during QP creation
3) Set max_sge_rd to zero since we dont support RD transport in our adapters.
4) Max cqes reported in ibv_devinfo should be from QUERY_CONFIG.
Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Create_CQ verb doesn't provide a PD pointer. So, until now we are
creating all (both userspace and kernel) CQ DB regions from PD0. This
will result in mmapping PD0 to applications. A rogue userspace
application can mess things up.
Also more serious issues is even the be2net NIC uses PD0.
This patch addresses this problem by:
1) Create a PD page for every userspace application when the
alloc_ucontext is called. This will be destroyed in
dealloc_ucontext.
2) All CQs for that context will use the PD allocated in ucontext.
3) The first create_PD call from application will result in returning
the PD address from its ucontext (no new PD will be created).
4) For subsecquent create_pd calls from application, we create new PDs for
the application.
Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
1) Fixed setting FR_MR bit for FRWR stag allocation
2) Access rights are passsed during FRWR stage and not during STAT allocation stage
3) FRWR WQE structure cleanup
4) Add QP level signaled bit.
Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
1) All RQ doorbells are handled by ERX2 and doorbell->num_posted
offset is constant to bit offset 24 for ERX2 irrspective of Q id.
2) Fixed RESET to INIT state change (from ERR->RST->INIT->RTR case).
Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
There are cases like SRIOV where can get only one MSI-X vector
allocated for RoCE. In that case we need to use the vector for both
data plane and control plane. We need to use EQ create version V2.
Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Upinder Malhi