Commit Graph

7510 Commits

Author SHA1 Message Date
Felipe Balbi 42f8eb7a10 usb: dwc3: gadget: don't force 'LST' always
the LST bit is to be set on the last of a series
of consecutive TRBs. We had a workaround for a
problem where data would get corrupted but that
doesn't happen anymore. It's likely that it was
caused by some FPGA instability during development
phase.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-21 13:24:46 +02:00
Felipe Balbi 68e823e24a usb: dwc3: gadget: don't return anything on prepare trbs
all that function does is setup a TRB to be sent
to HW later. There's no need to return anything
actually.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-21 13:24:45 +02:00
Felipe Balbi c71fc37c19 usb: dwc3: gadget: re-factor dwc3_prepare_trbs()
In order to make it easier to add SG support,
let's split the big loop out to its own function.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-21 13:24:45 +02:00
Felipe Balbi 14ff96e04c usb: renesas: pipe: convert a long if into a XOR operation
This is just a minor optimization for the long
if we have on the driver.

When we want to check that one input is true
and the other must be false, the bitwise XOR
operator will achieve that for us.

Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-21 13:24:43 +02:00
Felipe Contreras abfbe33410 usb: gadget: remove useless depends on Kconfig
Where are inside an 'if USB_GADGET'.

Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-21 13:24:43 +02:00
Heiko Stübner 922be95a3f usb: gadget: s3c-hsudc: remove the_controller global
Instead use container_of to retrieve the s3c_hsudc from the
struct usb_gadget pointer.

[ balbi@ti.com : changed verbose container_of() into
	an already provided helper 'to_hsudc()' ]

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-21 13:24:42 +02:00
Heiko Stübner dee19be7d8 usb: gadget: s3c-hsudc: use release_mem_region instead of release_resource
As the memory region is requested through request_mem_region
use the correct paired method to release it in the error path
and don't go "beneath the API".

Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-21 13:24:41 +02:00
Heiko Stübner bab7d037c8 usb: gadget: s3c-hsudc: Add regulator handling
The udc has three supplies: vdda (3.3V), vddi (1.2V) and vddosc (1.8-3.3V).
Turn these on and off on start and stop calls.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-21 13:24:40 +02:00
Heiko Stübner d93e2600d8 usb: gadget: s3c-hsudc: use udc_start and udc_stop functions
udc_start and udc_stop reduce code duplication in comparison to
start and stop generalising calls done by all drivers
(i.e. bind and unbind) and moving these calls to common code.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-21 13:24:39 +02:00
Heiko Stübner 103495aaf0 usb: gadget: s3c-hsudc: move device registration to probe
Instead of adding and deleting the gadget device in the start and stop
invocations. Use device_register in the probe method to initialize
and add the gadget device.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-21 13:24:39 +02:00
Heiko Stübner e9bcb9e5fe usb: gadget: s3c-hsudc: add missing otg_put_transceiver in probe
The number of get and put calls should always be equal.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-21 13:24:38 +02:00
Heiko Stübner a197756271 usb: gadget: s3c-hsudc: add __devinit to probe function
Fixes possible section mismatch warnings.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-21 13:24:37 +02:00
Heiko Stübner 715a3e41e7 usb: gadget: s3c-hsudc: move platform_data struct to global header
Gadget drivers should be compilable on all architectures.
This patch removes one dependency on architecture-specific code.

Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-21 13:24:27 +02:00
Vladimir Zapolskiy b0945c07d9 usb: musb: remove extern qualifier from musb_debug.h header
This change removes confusing extern qualifier, which doesn't have any practical
sense there.

Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@nokia.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-21 13:21:02 +02:00
Felipe Balbi 961906edb5 usb: dwc3: gadget: move us to Default State after reset
After a bus reset, we should move our state to
Default, in order to be able to re-enumerate again.

I only managed to trigger this problem with g_ether
by removing the cable after a few transfers had been
completed.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-20 18:28:06 +02:00
Felipe Contreras 00471f629e usb: otg: trivial cleanups
Spaces to tabs, proper alignment, and start sentences as they should.

Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-20 14:04:41 +02:00
Felipe Contreras c6bde9b5ae usb: musb: cleanup kconfig
The whole thing depends on USB_MUSB_HDRC, just add an 'if'.

Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-20 14:01:38 +02:00
Felipe Contreras 54a605f4ce usb: musb: trivial Kconfig cleanups
Shuffle the code a bit so the description is at the top.

Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-20 13:59:01 +02:00
Felipe Contreras 702ac61c51 musb: omap2430: avoid pm_runtime_disable()
These are handled by drivers core, and in a way that doesn't wake up the
devices.

Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-20 13:55:21 +02:00
Felipe Contreras 08dec56ee2 usb: musb: remove a bit of indentation
And use dev instead of musb->controller.

Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-20 13:55:14 +02:00
Felipe Contreras b3314d9ac5 usb: musb: trivial cleanup
enabled && driver || !enabled can be simplified to !enabled || driver.

Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-20 13:54:52 +02:00
Felipe Contreras 772aed45b6 usb: musb: fix pm_runtime mismatch
In musb_init_controller() there's a pm_runtime_put(), but there's no
pm_runtime_get(), which creates a mismatch that causes the driver to
sleep when it shouldn't.

This was introduced in 7acc619[1], but it wasn't triggered in my setup
until 18a2689[2] was merged to Linus' branch at point df0914[3]. IOW;
when PM is working as it was supposed to.

However, it seems most of the time this is used in a way that keeps the
counter above 0, so nobody noticed. Also, it seems to depend on the
configuration used in versions before 3.1, but not later (or in it).

I found the problem by loading isp1704_charger before any usb gadgets:
http://article.gmane.org/gmane.linux.kernel/1226122

All versions after 2.6.39 are affected.

[1] usb: musb: Idle path retention and offmode support for OMAP3
[2] OMAP2+: musb: hwmod adaptation for musb registration
[3] Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

Cc: stable@vger.kernel.org
Cc: Hema HK <hemahk@ti.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-20 13:38:09 +02:00
Neil Zhang 3a082ec9b2 USB: EHCI: Add Marvell Host Controller driver
This patch adds support for EHCI compliant HSUSB Host controller found
on Marvell Socs.

It fits both OTG and SPH controller on marvell Socs, including
PXA9xx/MMP2/MMP3/MGx.

Signed-off-by: Neil Zhang <zhangwm@marvell.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-20 12:58:13 +02:00
Neil Zhang 277164f03f USB: OTG: add Marvell usb OTG driver support
This driver is for ChipIdea USB OTG controller on Marvell Socs.
PXA9xx/MMP2/MMP3/MGx all have this USB OTG controller.

Signed-off-by: Neil Zhang <zhangwm@marvell.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-20 12:58:07 +02:00
Neil Zhang 5e6c86b017 usb: gadget: mv_udc: drop ARCH dependency
This patch do the following things:
1. Change the Kconfig information.
2. Rename the driver name.
3. Don't do any type cast to io memory.
4. Add dummy stub for clk framework.

Signed-off-by: Neil Zhang <zhangwm@marvell.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-20 12:55:06 +02:00
Neil Zhang c2bbd16b03 usb: gadget: mv_udc: fix bug in ep_dequeue
According to ChipIdea's SPEC, we cannot touch curr_dtd_ptr in dqh
directly, use prime endpoint instead.

Signed-off-by: Neil Zhang <zhangwm@marvell.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-20 12:53:21 +02:00
Felipe Balbi 7422ba5343 usb: gadget: epautoconf: do not change number of streams
We should not change gadget driver's descriptors just
because we think it's right to do so.

There are several of reasons which would support this
statement but it suffices to say that this was probably
never tested because it updates bmAttributes without
asking the driver if it's ok to do so.

This means that e.g. on UASP gadget it would enable
stream support even for the command endpoint which must
not have stream support enabled.

In fact, this change is fixing the bug introduced by
commit a59d6b9 (usb: gadget: add streams support to
the gadget framework) which was caught when testing
UASP gadget with dwc3 driver.

Cc: Tatyana Brokhman <tlinder@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-19 13:45:01 +02:00
Neil Zhang 91d959d8e5 usb: gadget: mv_udc: rewrite queue_dtd according to spec
Rewrite function queue_dtd according to ChipIdea's reference manual.
Remove all unnecessary logic, it will enhance the performance.

Signed-off-by: Neil Zhang <zhangwm@marvell.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-19 10:02:24 +02:00
Neil Zhang 86bb702813 usb: gadget: mv_udc: fix readl error
readl expected 'const volatile void *' as the argument.

Signed-off-by: Neil Zhang <zhangwm@marvell.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-19 10:02:16 +02:00
Keshava Munegowda 6c984b066d ARM: OMAP: USBHOST: Replace usbhs core driver APIs by Runtime pm APIs
The ehci and ohci drivers does not use the APIs of the usbhs
core driver; the runtime pm APIs are used for clock
enable/disable. Since usbhs is parent platform device of the
ehci and ohci devices, the runtime apis indirectly uses the
usb hs core device as input parameter to for clock functions.

Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Reviewed-by: Partha Basak <parthab@india.ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-12-16 04:29:57 -07:00
Olof Johansson 02735a29d8 Merge branch 'at91/defconfig' into next/cleanup 2011-12-15 22:02:34 -08:00
Dan Carpenter 8418153a4c usb: renesas_usbhs: silence a gcc warning
Gcc complains about this printk:
drivers/usb/renesas_usbhs/mod_gadget.c:188:3: warning: format ‘%x’
	expects argument of type ‘unsigned int’, but argument 3 has type
	‘dma_addr_t’ [-Wformat]

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-15 13:45:58 +02:00
Kuninori Morimoto d9b78f33d9 usb: renesas_usbhs: tidyup for smatch warnings
This patch tidyup below smatch complaint

drivers/usb/renesas_usbhs/mod_host.c +642 usbhsh_queue_done()
	 warn: variable dereferenced before check 'urb' (see line 636)

Special thanks to Dan

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-15 12:59:17 +02:00
Felipe Balbi 248b122b13 usb: dwc3: core: fix cached revision on our structure
All our revision macros are defined with the entire
32-bits which we read from GSNPSID register, so we
must cache all 32-bits properly rather than masking
the top 16-bits.

This will fix all revision checks we have on current
driver.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-14 21:59:30 +02:00
Ajay Kumar Gupta ccc080c77c usb: musb: fix reset issue with full speed device
TXMAXP register is not getting programmed correctly for a full speed device
as can_bulk_split() have been removed by
"0662481: usb: musb: disable double buffering when it's broken" patch.

Adding back the case for can_bulk_split() to fix the reset message seen with
a full speed stick.

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-14 09:32:51 +02:00
Andrew Lunn 63a9332b23 ARM: Orion: Get address map from plat-orion instead of via platform_data
Use an getter function in plat-orion/addr-map.c to get the address map
structure, rather than pass it to drivers in the platform_data
structures. When the drivers are built for none orion platforms, a
dummy function is provided instead which returns NULL.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Michael Walle <michael@walle.cc>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-12-13 18:46:55 -05:00
Bjørn Mork 02a551c975 USB: option: Removing one bogus and adding some new Huawei combinations
Huawei use the product code HUAWEI_PRODUCT_E353 (0x1506) for a
number of different devices, which each can appear with a number
of different descriptor sets.  Different types of interfaces
can be identified by looking at the subclass and protocol fields

Subclass 1 protocol 8 is actually the data interface of a CDC
ECM set, with subclass 1 protocol 9 as the control interface.
Neither support serial data communcation, and cannot therefore
be supported by this driver.

At the same time, add a few other sets which appear if the
device is configured in "Windows mode" using this modeswitch
message:
55534243000000000000000000000011060000000100000000000000000000

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-13 09:46:01 -08:00
Greg Kroah-Hartman 121a8cdd79 Merge branch 'for-next/gadget' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next
* 'for-next/gadget' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (50 commits)
  usb: renesas_usbhs: show error reason on usbhsh_urb_enqueu()
  usb: renesas_usbhs: add force packet remove method
  usb: renesas_usbhs: care usb_hcd_giveback_urb() status
  usb: renesas_usbhs: add usbhsh_is_running()
  usb: renesas_usbhs: disable attch irq after device attached
  usb: renesas_usbhs: care pipe sequence
  usb: renesas_usbhs: add usbhs_pipe_attach() method
  usb: renesas_usbhs: add usbhsh_endpoint_detach_all() for error case
  usb: renesas_usbhs: modify device attach method
  usb: renesas_usbhs: pop packet when urb dequeued
  usb: renesas_usbhs: add lost error value when enqueue
  usb: gadget: mv_udc: replace some debug info
  usb: gadget: mv_udc: refine suspend/resume function
  usb: gadget: mv_udc: refine the clock relative code
  usb: gadget: mv_udc: disable ISR when stopped
  usb: gadget: mv_udc: add otg relative code
  usb: gadget: Use kcalloc instead of kzalloc to allocate array
  usb: renesas_usbhs: remove the_controller_link
  usb: renesas_usbhs: add test-mode support
  usb: renesas_usbhs: call usbhsg_queue_pop() when pipe disable.
  ...
2011-12-13 09:37:40 -08:00
Kuninori Morimoto 15a3838b10 usb: renesas_usbhs: show error reason on usbhsh_urb_enqueu()
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-13 13:06:30 +02:00
Kuninori Morimoto 2d833faad2 usb: renesas_usbhs: add force packet remove method
Packet should be force removed when reset/detach

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-13 13:06:30 +02:00
Kuninori Morimoto 6d0376f844 usb: renesas_usbhs: care usb_hcd_giveback_urb() status
Without this patch, USB host hub shows error when cable was detached

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-13 13:06:29 +02:00
Kuninori Morimoto b1930da088 usb: renesas_usbhs: add usbhsh_is_running()
It is possible to judge whether renesas_usbhs driver is running,
by checking attch irq mask.
This patch adds usbhsh_is_running() to check it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-13 13:06:28 +02:00
Kuninori Morimoto 31e00fd116 usb: renesas_usbhs: disable attch irq after device attached
attch interrupt might happen infinitely on some USB hub (self power?).
This patch disable attch irq after device attached,
and enable it again when detach irq happen.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-13 13:06:27 +02:00
Kuninori Morimoto 3edeee3893 usb: renesas_usbhs: care pipe sequence
driver has to re-use the limited pipe for each device/endpoint
when it is USB host hub mode, since number of pipe has limitation.

Then, each pipe should care own pipe sequence for next packet.
This patch adds sequence control.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-13 13:06:26 +02:00
Kuninori Morimoto e5679d07a6 usb: renesas_usbhs: add usbhs_pipe_attach() method
driver has to re-use the limited pipe for each device/endpoint
when it is USB host hub mode, since number of pipe has limitation.
This patch adds usbhsh_pipe_attach/detach() functions for it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-13 13:06:25 +02:00
Kuninori Morimoto e4c57ded48 usb: renesas_usbhs: add usbhsh_endpoint_detach_all() for error case
This patch adds usbhsh_endpoint_detach_all() for error case.
usbhs_endpoitn_xxx() functions were moved to upper side in source code.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-13 13:06:24 +02:00
Kuninori Morimoto c1e4877a41 usb: renesas_usbhs: modify device attach method
Current renesas_usbhs had been assigning udev to each urb.
It was executed even though it was device0.
For this reason, the device0 had to set the new device address
which has still not been assigned. (it will be assigned on next step).
Current renesas_usbhs used fixed address for it.
but it is not good for USB hub support.
This patch modifies this issue.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-13 13:06:23 +02:00
Greg Kroah-Hartman a1016ce33c Merge branch 'for-next/musb' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next
* 'for-next/musb' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb:
  usb: musb: omap2430: fix compile warning
  usb: musb: fix pm_runtime calls while atomic
  usb: musb: drop ARCH dependency
  usb: musb: headers cleanup
  usb: musb: allow building USB_MUSB_TUSB6010 as a module
  usb: musb: use a Kconfig choice to pick the right DMA method
  usb: musb: omap2+: save and restore OTG_INTERFSEL
  usb: musb: omap2+: fix context api's
  usb: musb: ux500: optimize DMA callback routine
2011-12-12 15:51:45 -08:00
Greg Kroah-Hartman 007d00d4c1 Merge branch 'for-next/dwc3' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next
* 'for-next/dwc3' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (392 commits)
  usb: dwc3: ep0: fix for possible early delayed_status
  usb: dwc3: gadget: fix stream enable bit
  usb: dwc3: ep0: fix GetStatus handling (again)
  usb: dwc3: ep0: use dwc3_request for ep0 requsts instead of usb_request
  usb: dwc3: use correct hwparam register for power mgm check
  usb: dwc3: omap: move to module_platform_driver
  usb: dwc3: workaround: missing disconnect event
  usb: dwc3: workaround: missing USB3 Reset event
  usb: dwc3: workaround: U1/U2 -> U0 transiton
  usb: dwc3: gadget: return early in dwc3_cleanup_done_reqs()
  usb: dwc3: ep0: handle delayed_status again
  usb: dwc3: ep0: push ep0state into xfernotready processing
  usb: dwc3: fix sparse errors
  usb: dwc3: fix few coding style problems
  usb: dwc3: move generic dwc3 code from gadget into core
  usb: dwc3: use a helper function for operation mode setting
  usb: dwc3: ep0: don't use ep0in for transfers
  usb: dwc3: ep0: use proper endianess in SetFeature for wIndex
  usb: dwc3: core: drop DWC3_EVENT_BUFFERS_MAX
  usb: dwc3: omap: add multiple instances support to OMAP
  ...
2011-12-12 15:19:53 -08:00
Krzysztof Hałasa 6abff5dc4d USB: cdc-acm: add IDs for Motorola H24 HSPA USB module.
Add USB IDs for Motorola H24 HSPA USB module.

Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl>
Acked-by: Oliver Neukum <oneukum@suse.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-12 14:31:33 -08:00
Alex Hermann 414b591fd1 usb: option: Add Huawei E398 controlling interfaces
This patch adds the controlling interfaces for the Huawei E398.

Thanks to Bjørn Mork <bjorn@mork.no> for extracting the interface
numbers from the windows driver.

Signed-off-by: Alex Hermann <alex@wenlex.nl>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-12 14:31:32 -08:00
Felipe Balbi e7f4e73287 usb: musb: omap2430: fix compile warning
fix the following compile warning:

drivers/usb/musb/omap2430.c: In function 'musb_otg_notifier_work':
drivers/usb/musb/omap2430.c:279:3: warning: 'return' with a value, in
	function returning void
drivers/usb/musb/omap2430.c:282:2: warning: 'return' with a value, in
	function returning void

Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 13:07:03 +02:00
Kuninori Morimoto 547965436d usb: renesas_usbhs: pop packet when urb dequeued
usbhsh_ureq_free() is not enough when urb dequeued.

Without this patch, the driver can not recognize re-connected
USB device after USB hub disconnected

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 12:26:35 +02:00
Kuninori Morimoto 37332ee0df usb: renesas_usbhs: add lost error value when enqueue
usbhsh_urb_enqueue() didn't have error value when
usbhsh_device_attach() failed

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 12:26:35 +02:00
Kuninori Morimoto 1115b9e279 usb: renesas_usbhs: add hcd->has_tt for low/full speed
Low/Full speed device is not recognized without this patch

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 12:24:42 +02:00
Kuninori Morimoto b95eb7476e usb: renesas_usbhs: typofix: irq_dtch control DTCHE
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 12:24:34 +02:00
Yu Xu f44b915d31 usb: gadget: storage: release superspeed descriptors.
Release superspeed mass storage descriptors memory
when the function is unbind.

Signed-off-by: Yu Xu <yuxu@marvell.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 12:24:07 +02:00
Vikram Pandita 712d8efafb usb: musb: fix pm_runtime calls while atomic
musb pm_runtime_get_sync call happens in intrrupt context on cable attach case
That can result in re-enabling the interrupts and cause side affects.

So move the code to a work queue.

Following is the error path hit on cable attach:

BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:802
in_atomic(): 0, irqs_disabled(): 0, pid: 18, name: irq/378-twl6030

Backtrace:
[<c00520f0>] (dump_backtrace+0x0/0x110) from [<c054f454>] (dump_stack+0x18/0x1c)
[<c054f43c>] (dump_stack+0x0/0x1c) from [<c007f59c>] (__might_sleep+0x130/0x134)
[<c007f46c>] (__might_sleep+0x0/0x134) from [<c02c2794>] (__pm_runtime_resume+0x94/0x98)
[<c02c2700>] (__pm_runtime_resume+0x0/0x98) from [<c033e7e4>] (musb_otg_notifications+0x9c/0x164)
[<c033e748>] (musb_otg_notifications+0x0/0x164) from [<c00b3df0>] (notifier_call_chain+0x4c/0x8c)
[<c00b3da4>] (notifier_call_chain+0x0/0x8c) from [<c00b44a8>] (__atomic_notifier_call_chain+0x40/0x54)
[<c00b4468>] (__atomic_notifier_call_chain+0x0/0x54) from [<c00b44dc>] (atomic_notifier_call_chain+0x20/0x28)
[<c00b44bc>] (atomic_notifier_call_chain+0x0/0x28) from [<c033f124>] (twl6030_usb_irq+0xc8/0xdc)
[<c033f05c>] (twl6030_usb_irq+0x0/0xdc) from [<c00d79f8>] (irq_thread_fn+0x24/0x40)
[<c00d79d4>] (irq_thread_fn+0x0/0x40) from [<c00d7b64>] (irq_thread+0x150/0x1d8)
[<c00d7a14>] (irq_thread+0x0/0x1d8) from [<c00adf70>] (kthread+0x94/0x98)
[<c00adedc>] (kthread+0x0/0x98) from [<c0094388>] (do_exit+0x0/0x720)

Tested with:
MUSB Device mode: Cold boot / Hot plug
MUSB Host mode: Cold boot / Hot plug

Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Moiz Sonasath <m-sonasath@ti.com>
Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:51:54 +02:00
Felipe Balbi 1e546aa6c4 usb: musb: drop ARCH dependency
musb core driver and tusb6010 glue layer don't
depend on anything which is ARCH-specific. It
builds fine on x86 and ARM. Dropping the dependency
so we can compile-test on linux-next.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:51:53 +02:00
Felipe Balbi 7d5b49a202 usb: musb: headers cleanup
Remove a few unnecessary headers from a
few files.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:51:52 +02:00
Arnd Bergmann 9a35f8767a usb: musb: allow building USB_MUSB_TUSB6010 as a module
Commit 1376d92f9 "usb: musb: allow musb and glue layers to be modules"
made the USB_MUSB_TUSB6010 option modular, but actually building
the driver as a module does not work, so various randconfig builds
actually fail. This changes all code that depends on the
option to also check for modular builds, and exports the necessary
symbols.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:51:42 +02:00
Arnd Bergmann 2e7fc3ba68 usb: musb: use a Kconfig choice to pick the right DMA method
The logic to allow only one DMA driver in MUSB is currently
flawed, because it also allows picking no DMA driver at all
and also not selecting PIO mode.

Using a choice statement makes this foolproof for now and
also simplifies the Makefile.

Unfortunately, we will have to revisit this when we start
supporting multiple ARM platforms in a single kernel binary,
because at that point we will actually need to select
multiple DMA drivers and pick the right one at run-time.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:51:41 +02:00
Hema HK e25bec1601 usb: musb: omap2+: save and restore OTG_INTERFSEL
we need to save and restore OTG_INTERFSEL register
else we will be unable to function on resume after
OFF mode.

Reported-by: Devaraj Rangasamy <dev@ti.com>
Signed-off-by: Hema HK <hemahk@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:51:40 +02:00
Vikram Pandita ea73755445 usb: musb: omap2+: fix context api's
RxFifoSz, TxFifoSz, RxFifoAddr, TxFifoAddr
are all indexed registers.

So before doing a context save or restore, INDEX register
should be set, then only one gets to the right register offset.

Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:51:40 +02:00
Per Forlin be18a25189 usb: musb: ux500: optimize DMA callback routine
Skip the use of work queue and call musb_dma_completion() directly from
DMA callback context.

Here follows measurements on a Snowball board with ondemand governor active.

Performance using work queue:
(105 MB) copied, 6.23758 s, 16.8 MB/s
(105 MB) copied, 5.7151 s, 18.3 MB/s
(105 MB) copied, 5.83583 s, 18.0 MB/s
(105 MB) copied, 5.93611 s, 17.7 MB/s

Performance without work queue
(105 MB) copied, 5.62173 s, 18.7 MB/s
(105 MB) copied, 5.61811 s, 18.7 MB/s
(105 MB) copied, 5.57817 s, 18.8 MB/s
(105 MB) copied, 5.58549 s, 18.8 MB/s

Signed-off-by: Per Forlin <per.forlin@linaro.org>
Acked-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:51:39 +02:00
Felipe Balbi 68d3e668d2 usb: dwc3: ep0: fix for possible early delayed_status
There is a very small possibility (previously unimagined
by us) that the whole Mass Storage delayed status happens
rather early, before we even get our XferNotReady event.

In that case, we will be queueing a request to ep0 while
we're still on Setup Phase and we would be waiting for
another usb_ep_queue() forever.

Handle such cases by clearing dwc->delayed_status so that
we start control status from the next XferNotReady like
there was no wait for Delayed Status.

Tested against Linux 3.2-rc3 and USB30CV tool from USB-IF
(on a Windows XP with USB3 PCIe card).

Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:48:47 +02:00
Felipe Balbi c90bfaece9 usb: dwc3: gadget: fix stream enable bit
ep->max_streams is a mere hint to the gadget
driver that 'ep' supports stream handling. Using
that as a decision variable for enabling streams
was my worst brain-fart to date.

Instead, we should check from the Superspeed
Endpoint Companion Descriptor if the endpoint
has requested streams. For that we need a little
re-factoring but it is now correct.

Debugged-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:48:47 +02:00
Felipe Balbi e261779605 usb: dwc3: ep0: fix GetStatus handling (again)
previous commit fixed part of it but it was still
calling usb_ep_queue() from IRQ context without
loosing locks. That cannot be done otherwise we will
have a recursive locking.

Also, we need to assign the 'dep' pointer on
dwc->ep0_usb_req otherwise we will have a NULL
pointer dereference on dwc3_map_buffer_to_dma().

Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:48:46 +02:00
Sebastian Andrzej Siewior e0ce0b0a0a usb: dwc3: ep0: use dwc3_request for ep0 requsts instead of usb_request
Instead of special functions and shortcuts for sending our internal
answers to the host we started doing what the gadget does and used the
public API for this. Since we only were using a few fields the
usb_request was enough. Later added the list handling in order to
synchronize the host / gadget events and now we require to have the
dwc3_request struct around our usb_request or else we touch memory that
does not belong to us. So this patch does this.

Reported-by: Partha Basak <p-basak2@ti.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:48:45 +02:00
Sebastian Andrzej Siewior 164d773168 usb: dwc3: use correct hwparam register for power mgm check
We mask the correct bits within the wrong register. The power
optimization mode is stored hwparam1 register and not in hwparam0.

Reported-by: Partha Basak <p-basak2@ti.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:48:44 +02:00
Felipe Balbi 68380876d6 usb: dwc3: omap: move to module_platform_driver
the new module_platform_driver macro is a helper
for modules which just register and unregister the
platform_driver. It allows us to delete a few
duplicated lines.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:48:43 +02:00
Felipe Balbi df62df56e1 usb: dwc3: workaround: missing disconnect event
DWC3 revisions <1.88a have an issue which would
case a missing Disconnect event if cable is
disconnected while there's a Setup packet
pending the FIFO.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:48:42 +02:00
Felipe Balbi 05870c5ba2 usb: dwc3: workaround: missing USB3 Reset event
DWC3 revisions <1.90a have an issue which would cause
a missing USB3 Reset event. In such cases, it's
suggested that we follow the steps of a normal
USB3 Reset on Connection Done Event.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:48:35 +02:00
Felipe Balbi fae2b904aa usb: dwc3: workaround: U1/U2 -> U0 transiton
RTL revisions <1.83a have an issue where, depending
on the link partner, the USB link might do multiple
entry/exit of low power states before a transfer
takes place causing degraded throughput.

The suggested workaround is to clear bits
12:9 of DCTL register if we see a transition
from U1|U2 to U0 and only re-enable that on
a transfer complete IRQ and we have no pending
transfers on any of the enabled endpoints.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:48:34 +02:00
Sebastian Andrzej Siewior d39ee7be2a usb: dwc3: gadget: return early in dwc3_cleanup_done_reqs()
This patch avoids the compiler spitting out the following warning:
|drivers/usb/dwc3/gadget.c:1304: warning: 'trb' is used uninitialized \
	in this function

This is only uninitialized if the list of to-cleanup TRBs is empty which
should not be the case because we call this functions once a transfer
completed so it should be on list.

In order to make the warning disappear we return early. This should
never happen and the WARN_ON_ONCE(1) is there in case it happens
so we can investigate what went wrong.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:48:32 +02:00
Sebastian Andrzej Siewior 5bdb1dcc63 usb: dwc3: ep0: handle delayed_status again
Since the re-worked ep0 handling (which uses HW's hints to recognize the ep0
status) we lost the delayed status handling. This is used by the file and mass
storage gadget to gain some extra time so setup its internal status before it
can proceed further requests.
In particular the storage gadget does nothing on USB_REQ_SET_CONFIGURATION but
wakes up a thread which handles the request. If the udc driver continues ep0
handling before the thread did its work then then endpoint is not yet
configured and further requests will fail. Once the gadget is ready, it will
enqueue an empty packet which is used for synchronization.
In order to fix this issue, the patch does the following:
Set ->delayed_status once the delayed_status has been notices and do not
continue on the next XferNotReady event. We will continues ep0 processing once
the gadget enqueued the zero packet for synchronization.

A cleaner approach would be to enforce the gadget to enqueue an empty
(zero) request even for the status phase but this would do for now.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:48:31 +02:00
Sebastian Andrzej Siewior f0f2b2a2db usb: dwc3: ep0: push ep0state into xfernotready processing
We wait for the XferNotReady before we start the transfer and by then we
know ep0 state in which we supposed to be.
This is some cleanup work for the following patch in which we require to
know the ep0 state before the transfer completes.
While here, also change the argument to dwc3_ep0_do_control_status() so
we don't require the complete event structure but only the required
piece of information.

Inspired-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:48:30 +02:00
Felipe Balbi 8becf27044 usb: dwc3: fix sparse errors
sparse caught three mistakes on this driver,
fix them:

drivers/usb/dwc3/ep0.c:806:29: warning: duplicate const
drivers/usb/dwc3/debugfs.c:481:15: warning: symbol 'dwc3_debugfs_init' \
	was not declared. Should it be static?
drivers/usb/dwc3/debugfs.c:518:16: warning: symbol 'dwc3_debugfs_exit' \
	was not declared. Should it be static?

Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:48:29 +02:00
Felipe Balbi 25b8ff68bf usb: dwc3: fix few coding style problems
There were a few coding style issues with this driver
which are now fixed:

drivers/usb/dwc3/debugfs.c:48: WARNING: Use #include \
	<linux/uaccess.h> instead of <asm/uaccess.h>
drivers/usb/dwc3/debugfs.c:484: ERROR: space required \
	before the open brace '{'
drivers/usb/dwc3/ep0.c:261: WARNING: line over 80 characters
drivers/usb/dwc3/ep0.c:287: WARNING: suspect code indent \
	for conditional statements (16, 23)
drivers/usb/dwc3/gadget.c:749: WARNING: line over 80 characters
drivers/usb/dwc3/gadget.c:1267: WARNING: line over 80 characters
drivers/usb/dwc3/gadget.h:116: WARNING: line over 80 characters
drivers/usb/dwc3/io.h:42: WARNING: Use #include \
	<linux/io.h> instead of <asm/io.h>

Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:48:29 +02:00
Sebastian Andrzej Siewior 4878a02898 usb: dwc3: move generic dwc3 code from gadget into core
A few inits like the scale value or the removal of the DISSCRAMBLE is
done in the gadget code however it touches a general register.
Move this piece to the core.c file since it is likely to be requied by
both, parts of the core (device and host).

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:48:27 +02:00
Sebastian Andrzej Siewior 3140e8cbfe usb: dwc3: use a helper function for operation mode setting
There are two where need to set operational mode:
- during initialization while we decide to run in host,device or DRD
  mode
- at runtime via the debugfs interface.

This patch provides a new function which sets the operational mode and
moves its initialiation to the mode switch instead in the gadget code
itself.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:48:26 +02:00
Sebastian Andrzej Siewior c2da2ff006 usb: dwc3: ep0: don't use ep0in for transfers
In "usb: dwc3: remove special status request handling in ep0" I simplied
a few things and used the generic API for the status transfers. The bug
I introcuded here is that we queue now requests to dep[1] but we don't
clear that list in the stall+start case.
Actually we don't need to use dep[1] at all. We only did in the past to
talk to the correct endpoint (i.e. in or out). This is now take care of
in a diffent place within the ep0 code. So we could queue the in
transfers to dep[0] and don't use dep[1] at all.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:48:25 +02:00
Sebastian Andrzej Siewior 1e7618d8a1 usb: dwc3: ep0: use proper endianess in SetFeature for wIndex
The first access was correct, the second was wrong.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:48:25 +02:00
Felipe Balbi 457d3f214f usb: dwc3: core: drop DWC3_EVENT_BUFFERS_MAX
hardware will tell us how many event buffers we
need to support, so let's allocate the array
dynamically too.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:48:24 +02:00
Felipe Balbi 5ddcee27c1 usb: dwc3: omap: add multiple instances support to OMAP
if we ever have an omap with multiple instances of
the DWC3 IP, we need unique names for them. In order
to achieve that, let's use the dwc3_get/put_device_id()
calls to give us an unique device identifier.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:48:23 +02:00
Felipe Balbi 8300dd236e usb: dwc3: move dwc3 device ID bitmap to core.c
if we want to support situations where we have
both SoC and PCIe versions of the IP on the same
platform, we need to have sequential numbers between
them, otherwise we will still have name collisions.

Because of that, we need to move dwc3_get/put_device_id()
to core.c and export that symbol to be used by glue
layers.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:48:21 +02:00
Sebastian Andrzej Siewior 8ee6270c7f usb: dwc3: remove special status request handling in ep0
The GetStatus (STD)-request is handled the driver and uses a tiny hack
to send the two bytes long answer. This patch removes the custom hack
uses the normal usb_ep_queue() for that.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:48:21 +02:00
Sebastian Andrzej Siewior 0cc7a519c4 usb: dwc3: reset pending status flag in error case
If we stall and restart we have to reset also this flag to 0 as there is
nothing pending anymore.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:48:20 +02:00
Sebastian Andrzej Siewior bd178f2d62 usb: dwc3: host: remove unused includes
None of these are required atm.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:48:19 +02:00
Sebastian Andrzej Siewior c5537ea531 usb: dwc3: debugfs: hold the lock in during mode change
The read and write operation is atomic and we need no locking around
this operations. What we need however is a lock that is held which
ensures that the content of the DWC3_GCTL has not been changed. With
this, the conten may have been change changed after the first but before
our write back.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:48:19 +02:00
Sebastian Andrzej Siewior 7ae4fc4dc8 usb: dwc3: add a platform device alias
We can have three modules here: dwc3.ko, dwc3-omap.ko and dwc3-pci.ko.
The later have already ids-aliases for probing and is fine. The omap
module has alias for DT but lacks alias for the "native"
platform_device. Maybe we should get rid of it and stick to the DT name?
Both glue modules create a new device for which the dwc3.ko module is
responsible and that one lacks the platform alias.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:48:17 +02:00
Felipe Balbi 9cc9bcd5b3 usb: dwc3: ep0: handle unexpected XferNotReady events
Sometimes the host might be trying to initiate Data or
Status phase for an older Control transfer. In such
situations we must STALL that transfer and restart
the state machine rather than letting such situation
go through the wire.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:48:16 +02:00
Felipe Balbi 0b9fe32dee usb: dwc3: debugfs: add support for changing port mode
This makes testing a lot easier when trying to
switch between host and device modes.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:48:15 +02:00
Felipe Balbi f96a6ec1db usb: dwc3: ep0: SetAddress() won't be issued while Configured
I have talked to USB-IF about USB30CV issuing SetAddres()
with a device on Configured state and they have agreed on
changing USB30CV not to do so.

Adding back the STALL reply in such case and while at
that, also add a debugging message for an address which
is too large.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:48:15 +02:00
Felipe Balbi c4da177f1f usb: dwc3: depend on both Host and Gadget stacks
now that we have host support, we must depend
on both sides.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:48:14 +02:00
Felipe Balbi f80b45e75e usb: dwc3: move gadget prototypes to core.h
host prototypes are there, let's move gadget's
closer.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:48:13 +02:00
Felipe Balbi 67920bd7c9 usb: dwc3: always compile gadget side too
We can decide in runtime if that will be used
or not.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:48:13 +02:00
Felipe Balbi d07e8819a0 usb: dwc3: add xHCI Host support
The Designware USB3 IP can be configured with
an internal xHCI. If we're running on such a
version, let's start the xHCI stack.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:48:12 +02:00
Felipe Balbi 0949e99b05 usb: dwc3: fetch mode of operation from HW
There's no need to add driver_data for something
we can fetch from HW.

This also makes our id_table unnecessary - at least
for now -, so we also remove it on the same patch.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:48:11 +02:00
Felipe Balbi 9f622b2a40 usb: dwc3: calculate number of event buffers dynamically
This will allow us to only allocate memory when
we actually need.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:48:11 +02:00
Felipe Balbi 6c167fc9b0 usb: dwc3: allow forcing a maximum speed
this is mainly for testing. In order to be able
to test if we're enumerating correctly on all
speeds, let that be controlled by a module
parameter.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:48:10 +02:00
Felipe Balbi b2c2271c82 usb: dwc3: gadget: don't disable endpoints on exit
when we remove the gadget driver, it will already
do that for us.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:48:09 +02:00
Neil Zhang 2bcb751440 usb: gadget: mv_udc: replace some debug info
replace some debug info, make it easy to use.

Signed-off-by: Neil Zhang <zhangwm@marvell.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:45:25 +02:00
Neil Zhang 5076ae5588 usb: gadget: mv_udc: refine suspend/resume function
This patch impletments system suspend/resume functions for Marvell
otg controller.
If OTG is enabled, OTG driver will do most of the work.
If not, we will check clock gating.
  If clock gating is enabled, the UDC will be start/stop automatically.
  If not, UDC will be start/stop in suspend/resume functions.

Signed-off-by: Neil Zhang <zhangwm@marvell.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:45:24 +02:00
Neil Zhang 85ff7bfb6e usb: gadget: mv_udc: refine the clock relative code
Split the clock relative code from clock gating solution.
Then we can remove some duplicate code, make the code more clean.

Signed-off-by: Neil Zhang <zhangwm@marvell.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:45:24 +02:00
Neil Zhang 309d6d2be4 usb: gadget: mv_udc: disable ISR when stopped
When device is stopped, there is no need to handle ISR.
Especially when otg switch to HOST mode.

Signed-off-by: Neil Zhang <zhangwm@marvell.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:45:23 +02:00
Neil Zhang 487d54d172 usb: gadget: mv_udc: add otg relative code
Add otg relative code, make it possible to switch between host and
device.

Signed-off-by: Neil Zhang <zhangwm@marvell.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:45:22 +02:00
Thomas Meyer 9823a52539 usb: gadget: Use kcalloc instead of kzalloc to allocate array
The advantage of kcalloc is, that will prevent integer overflows which could
result from the multiplication of number of elements and size and it is also
a bit nicer to read.

The semantic patch that makes this change is available
in https://lkml.org/lkml/2011/11/25/107

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Acked-by: Michal Nazarewicz <[4]mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:45:21 +02:00
Kuninori Morimoto b294b20336 usb: renesas_usbhs: remove the_controller_link
current renesas_usbhs is using new style udc_start/stop from
af1d7056a5
(usb: gadget: renesas: convert to new style).

with this patch we can finally remove the global "the_controller_link"

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:45:20 +02:00
Kuninori Morimoto dfbb7f4fba usb: renesas_usbhs: add test-mode support
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:45:20 +02:00
Kuninori Morimoto 91b158f4d1 usb: renesas_usbhs: call usbhsg_queue_pop() when pipe disable.
When poping packet from queue, it needs correct end procedure.
This patch call usbhsg_queue_pop() in usbhsg_pipe_disable().

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:45:19 +02:00
Kuninori Morimoto 25fa70795b usb: renesas_usbhs: send packet in necessary timing.
Current renesas_usbhs driver always tries to send packet in end of recip handler.
But it breaks chapter 9 EndpointHalt test.
This patch fixup this issue.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:45:18 +02:00
Kuninori Morimoto 17f7f76940 usb: renesas_usbhs: add basic USB_REQ_GET_STATUS support
This patch adds basic get-status support for chapter 9 test.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:45:16 +02:00
Kuninori Morimoto ced6e09e6e usb: renesas_usbhs: add basic USB_REQ_SET_FEATURE support
This patch adds basic set-feature support for chapter 9 test.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:45:16 +02:00
Kuninori Morimoto 9cf1b06e90 usb: renesas_usbhs: add usbhs_pipe_is_stall()
This is preparation for chapter 9 test

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:45:15 +02:00
Kuninori Morimoto 4b81593201 usb: renesas_usbhs: remove superfluous usbhs_lock from recip handler
recip handler will call various functions which are holding
usbhs_lock.

This patch removes superfluous usbhs_lock from recip handler
to escape double lock.

[ balbi@ti.com : brushed up commit log a bit ]

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:45:14 +02:00
Michal Nazarewicz 7177aed44f usb: gadget: rename usb_gadget_driver::speed to max_speed
This commit renames the “speed” field of the usb_gadget_driver
structure to “max_speed”.  This is so that to make it more
apparent that the field represents the maximum speed gadget
driver can support.

This also make the field look more like fields with the same
name in usb_gadget and usb_composite_driver structures.  All
of those represent the *maximal* speed given entity supports.

After this commit, there are the following fields in various
structures:
* usb_gadget::speed - the current connection speed,
* usb_gadget::max_speed - maximal speed UDC supports,
* usb_gadget_driver::max_speed - maximal speed gadget driver
  supports, and
* usb_composite_driver::max_speed - maximal speed composite
  gadget supports.

Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:45:12 +02:00
Michal Nazarewicz d327ab5b6d usb: gadget: replace usb_gadget::is_dualspeed with max_speed
This commit replaces usb_gadget's is_dualspeed field with
a max_speed field.

[ balbi@ti.com : Fixed DWC3 driver ]

Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:45:11 +02:00
Kuninori Morimoto 7aac8d1537 usb: gadget: renesas_usbhs: parameter cleanup for usbhsh_device_xx()
current mod_host used usbhs_device_alloc/free(),
but allocated variable was attached to each xx->hcpriv.
The intuitively clear name was not xxx_alloc/free() but xxx_attach/detach().

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:45:10 +02:00
Kuninori Morimoto 4825093e9d usb: gadget: renesas_usbhs: parameter cleanup for usbhsh_endpoint_xx()
current mod_host used usbhs_endpoint_alloc/free(),
but allocated variable was attached to each xx->hcpriv.
The intuitively clear name was not xxx_alloc/free() but xxx_attach/detach().

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:45:09 +02:00
Kuninori Morimoto 3eddc9e4c8 usb: gadget: renesas_usbhs: parameter cleanup for usbhsh_xx_queue_push()
This patch remove unneeded parameter from usbhsh_xx_queue_push()

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:45:09 +02:00
Kuninori Morimoto f352741d27 usb: gadget: renesas_usbhs: cleanup usbhsh_endpoint_xxx()
this patch cleanup
 - make sure static function
 - remove unneeded label
 - useless local variable were removed

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:45:08 +02:00
Kuninori Morimoto d399f90d19 usb: gadget: renesas_usbhs: adds spin lock area on mod_host
spin lock was needed in mod_host.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:45:07 +02:00
Kuninori Morimoto ab14230854 usb: gadget: renesas_usbhs: check device0 status when alloc
device0 was treated without checking in usbhsh_device_alloc().
but "udev->usbv" and "dev_set_drvdata()" will be overwritten
if device0  was multi-allocated.
This patch fixes this issue.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:45:07 +02:00
Kuninori Morimoto c5b963f809 usb: gadget: renesas_usbhs: remove usbhsh_request list
mod_host had usbhsh_request active/free list.
it was almost meaningless, and vainly complicated.
This patch remove it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:45:05 +02:00
Kuninori Morimoto 9c6736523a usb: gadget: renesas_usbhs: usbhs_set_device_config() care upphub/hubport
current usbhs_set_device_config() didn't care upphub/hubport.
This patch adds its value.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:45:04 +02:00
Kuninori Morimoto fca8ab7ee1 usb: gadget: renesas_usbhs: cleanup usbhs_endpoint_disable()
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:45:03 +02:00
Kuninori Morimoto 3dd492686c usb: gadget: renesas_usbhs: modify function name of usbhs_set_device_xx()
it was device configuration setting function, not only speed.
This patch modify function name usbhs_set_device_speed() -> usbhs_set_device_config()

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:45:02 +02:00
Kuninori Morimoto fc9d5c79f6 usb: gadget: renesas_usbhs: usbhsh_ureq_alloc/free() care urb->hcpriv
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:45:02 +02:00
Kuninori Morimoto ee8a0bf5a7 usb: gadget: renesas_usbhs: cleanup complicated ureq alloc/free
DCP data/status stage needs ureq to usbhs_pkt_push(),
but sometimes, there is no data stage.
In that case, allocated ureq was not freed,
Current ureq alloc/free pair were difficult to understand.
This patch removed unnecessary/un-understandable ureq alloc
from usbhsh_urb_enqueue(), and create simpler alloc/free pair.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:45:01 +02:00
Kuninori Morimoto 1ab6f257e1 usb: gadget: renesas_usbhs: drop dependency for mod_gadget
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:45:00 +02:00
Yuping Luo 144974e7f9 usb: gadget: mass_storage: support multi-luns with different logic block size
With Peiyu's patch "gadget: mass_storage: adapt logic block size to bound block
devices" (http://www.spinics.net/lists/linux-usb/msg50791.html), now mass storage
can adjust logic block size dynamically based on real devices.
Then there is one issue caused by it, if two luns have different logic block size,
mass storage can't work.
Let's check the current software flow:
1. get_next_command(): call received_cbw();
2. received_cbw(): update common->lun = cbw->Lun, but common->curlen is not updated;
3. do_scsi_command(): in READ_X and WRITE_X commands, common->data_size_from_cmnd is
updated by common->curlun->blkbits;
4. check_command(): update common->curlun according to common->lun
As you can see, the step 3 uses wrong common->curlun, then wrong common->curlun->blkbits.
If the two luns have same blkbits, there isn't issue. Otherwise, both will fail.
This patch moves the common->curlun update to step 1, then make sure step 3 gets right
blkbits and data_size_from_cmnd.

Cc: Peiyu Li <peiyu.li@csr.com>
Signed-off-by: YuPing Luo <yuping.luo@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:44:59 +02:00
Kuninori Morimoto b4fcea2a71 usb: gadget: renesas_usbhs: unified callback function
renesas_usbhs needs callback for notify hotplug.
but it were 2 methods which are almost same.
This patch unified these into one.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:44:59 +02:00
Kuninori Morimoto f1ee56a000 usb: gadget: renesas_usbhs: add platform power control function
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:44:58 +02:00
Kuninori Morimoto a49a88f108 usb: gadget: renesas_usbhs: tidyup the unit of detection_delay
detection_delay was assumed as msec

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:44:57 +02:00
Kuninori Morimoto 25234b46be usb: gadget: renesas_usbhs: tidyup mod_host request variable name
renesas_usbhs driver use "req" for struct usb_ctrlrequest,
and "ureq" for struct usbhsh_request

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:44:56 +02:00
Kuninori Morimoto 76190152fb usb: gadget: renesas_usbhs: tidyup usbhs_sys_clock_ctrl() was local function
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:44:56 +02:00
Kuninori Morimoto 3244a7b43f usb: gadget: renesas_usbhs: remove usbhs_sys_usb_ctrl()
usbhs_sys_usb_ctrl() can collect into usbhs_sys_host/function_ctrl().

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:44:47 +02:00
Kuninori Morimoto 2288e10993 usb: gadget: renesas_usbhs: remove usbhs_sys_hispeed_ctrl()
usbhs_sys_hispeed_ctrl() can collect into usbhs_sys_host/function_ctrl().

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:44:46 +02:00
Marc Kleine-Budde dd39c358df USB: ci13xxx_udc: handle controllers with less than 16 EPs
The ci13xxx_udc driver checks the number of endpoints in the udc
controller, however some routines expect that the hardware has 16
bidirectional endpoints.

This patch improves the driver to work on controllers with less than
16 endpoints like the udc controller found on freescale's
mx23 and mx28.

Tested-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:44:45 +02:00
Marc Kleine-Budde 7bb4fdc602 USB: ci13xxx_udc: make suspend and resume in gadget driver optional
Some gadget drivers don't implement suspend and/or resume functions.
Instead of changing the gadget drivers, make suspend and resume in
ci13xxx_udc (following other udc drivers) optional.

Tested-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:44:45 +02:00
Havard Skinnemoen 99823f457d usb: cdc-acm: Kill ACM_READY() macro completely
The ACM_READY() macro doesn't seem to do anything useful, and it may
prevent tty_wait_until_sent() from working properly when called from
close.

Previously, acm_tty_chars_in_buffer() returned 0 whenever
acm->port.count was 0. This means close() could return before all the
data has actually been written.

Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09 19:33:48 -08:00
Aman Deep 7bf01185c5 USB: Adding #define in hub_configure() and hcd.c file
This patch is in succession of previous patch
commit c842114792
        xHCI: Adding #define values used for hub descriptor

Hub descriptors characteristics #defines values are added in
hub_configure() in place of magic numbers as asked by Alan Stern.
And the indentation for switch and case is changed to be same.

Some #defines values are added in ch11.h for defining hub class
protocols and used in hub.c and hcd.c in which magic values were
used for hub class protocols.

Signed-off-by: Aman Deep <amandeep3986@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09 16:20:38 -08:00
Tanmay Upadhyay 35657c4d72 USB: pxa168: Fix compilation error
After commit c430131a02 (Support
controllers with big endian capability regs), HC_LENGTH takes
two arguments. This patch fixes following compilation error:

In file included from drivers/usb/host/ehci-hcd.c:1323:
drivers/usb/host/ehci-pxa168.c:302:54: error: macro "HC_LENGTH" requires 2 arguments, but only 1 given
In file included from drivers/usb/host/ehci-hcd.c:1323:
drivers/usb/host/ehci-pxa168.c: In function 'ehci_pxa168_drv_probe':
drivers/usb/host/ehci-pxa168.c:302: error: 'HC_LENGTH' undeclared (first use in this function)
drivers/usb/host/ehci-pxa168.c:302: error: (Each undeclared identifier is reported only once
drivers/usb/host/ehci-pxa168.c:302: error: for each function it appears in.)

Signed-off-by: Tanmay Upadhyay <tanmay.upadhyay@einfochips.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09 16:18:20 -08:00
Thomas Meyer d5ca9db8f1 USB: wusb: Use kcalloc instead of kzalloc to allocate array
The advantage of kcalloc is, that will prevent integer overflows which could
result from the multiplication of number of elements and size and it is also
a bit nicer to read.

The semantic patch that makes this change is available
in https://lkml.org/lkml/2011/11/25/107

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09 16:18:20 -08:00
Thomas Meyer 87763842b7 usb: gadget: renesas_usbhs: Use kcalloc instead of kzalloc to allocate array
The advantage of kcalloc is, that will prevent integer overflows which could
result from the multiplication of number of elements and size and it is also
a bit nicer to read.

The semantic patch that makes this change is available
in https://lkml.org/lkml/2011/11/25/107

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09 16:18:19 -08:00
Greg Kroah-Hartman 59bf5cf94f USB: isight: fix kernel bug when loading firmware
We were sending data on the stack when uploading firmware, which causes
some machines fits, and is not allowed.  Fix this by using the buffer we
already had around for this very purpose.

Reported-by: Wouter M. Koolen <wmkoolen@cwi.nl>
Tested-by: Wouter M. Koolen <wmkoolen@cwi.nl>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09 16:18:19 -08:00
Clemens Ladisch bc677d5b64 usb: fix number of mapped SG DMA entries
Add a new field num_mapped_sgs to struct urb so that we have a place to
store the number of mapped entries and can also retain the original
value of entries in num_sgs.  Previously, usb_hcd_map_urb_for_dma()
would overwrite this with the number of mapped entries, which would
break dma_unmap_sg() because it requires the original number of entries.

This fixes warnings like the following when using USB storage devices:
 ------------[ cut here ]------------
 WARNING: at lib/dma-debug.c:902 check_unmap+0x4e4/0x695()
 ehci_hcd 0000:00:12.2: DMA-API: device driver frees DMA sg list with different entry count [map count=4] [unmap count=1]
 Modules linked in: ohci_hcd ehci_hcd
 Pid: 0, comm: kworker/0:1 Not tainted 3.2.0-rc2+ #319
 Call Trace:
  <IRQ>  [<ffffffff81036d3b>] warn_slowpath_common+0x80/0x98
  [<ffffffff81036de7>] warn_slowpath_fmt+0x41/0x43
  [<ffffffff811fa5ae>] check_unmap+0x4e4/0x695
  [<ffffffff8105e92c>] ? trace_hardirqs_off+0xd/0xf
  [<ffffffff8147208b>] ? _raw_spin_unlock_irqrestore+0x33/0x50
  [<ffffffff811fa84a>] debug_dma_unmap_sg+0xeb/0x117
  [<ffffffff8137b02f>] usb_hcd_unmap_urb_for_dma+0x71/0x188
  [<ffffffff8137b166>] unmap_urb_for_dma+0x20/0x22
  [<ffffffff8137b1c5>] usb_hcd_giveback_urb+0x5d/0xc0
  [<ffffffffa0000d02>] ehci_urb_done+0xf7/0x10c [ehci_hcd]
  [<ffffffffa0001140>] qh_completions+0x429/0x4bd [ehci_hcd]
  [<ffffffffa000340a>] ehci_work+0x95/0x9c0 [ehci_hcd]
  ...
 ---[ end trace f29ac88a5a48c580 ]---
 Mapped at:
  [<ffffffff811faac4>] debug_dma_map_sg+0x45/0x139
  [<ffffffff8137bc0b>] usb_hcd_map_urb_for_dma+0x22e/0x478
  [<ffffffff8137c494>] usb_hcd_submit_urb+0x63f/0x6fa
  [<ffffffff8137d01c>] usb_submit_urb+0x2c7/0x2de
  [<ffffffff8137dcd4>] usb_sg_wait+0x55/0x161

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09 16:18:19 -08:00
Dave Martin 8ad028bd97 USB: isp1760: Fix endianness-sensitivity in of_isp1760_probe()
Data read direct from device tree properties will be in the device
tree's native endianness (i.e., big-endian).

This patch uses of_property_read_u32() to read the bus-width
property in host byte order instead.

Signed-off-by: Dave Martin <dave.martin@linaro.org>
Acked-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09 16:18:18 -08:00
Havard Skinnemoen 7fb57a019f USB: cdc-acm: Fix potential deadlock (lockdep warning)
Rework the locking and lifecycle management in the cdc-acm driver.
Instead of using a global mutex to prevent the 'acm' object from being
freed, use the tty_port kref to keep the device alive when either the
USB side or TTY side is still active.

This allows us to use the global mutex purely for protecting the
acm_table, while use acm->mutex to guard against disconnect during
TTY port activation and shutdown.

The USB-side kref is taken during port initialization in probe(), and
released at the end of disconnect(). The TTY-side kref is taken in
install() and released in cleanup(). On disconnect, tty_vhangup() is
called instead of tty_hangup() to ensure the TTY hangup processing is
completed before the USB device is taken down.

The TTY open and close handlers have been gutted and replaced with
tty_port_open() and tty_port_close() respectively. The driver-specific
code which used to be there was spread across install(), activate() and
shutdown().

Reported-by: Dave Jones <davej@redhat.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09 16:18:18 -08:00
Greg Kroah-Hartman 332ceddb8c Merge branch 'for-usb' of git://git.kernel.org/pub/scm/linux/kernel/git/geoff/ps3-linux into usb-next
* 'for-usb' of git://git.kernel.org/pub/scm/linux/kernel/git/geoff/ps3-linux:
  usb: PS3 EHCI QH read work-around
  usb: Fix PS3 EHCI suspend
  usb: PS3 EHCI HC reset work-around
  usb: Remove ehci_reset call from ehci_run
2011-12-09 16:10:29 -08:00
Geoff Levand aaa0ef289a usb: PS3 EHCI QH read work-around
PS3 EHCI HC errata fix 244.  The SCC EHCI HC will not correctly perform QH
reads that occur near or span a micro-frame boundry.  This is due to a problem
in the Nak Count Reload Control logic (EHCI Specification 1.0 Section 4.9.1).

The work-around for this problem is for the HC driver to set I=1 (inactive) for
QHs with H=1 (list head).

Signed-off-by: Geoff Levand <geoff@infradead.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
2011-12-09 10:48:00 -08:00
Geoff Levand df7c1ca229 usb: Fix PS3 EHCI suspend
The EHCI USB controller of the Cell Super Companion Chip used in the PS3
will stop the root hub after all root hub ports are suspended.  When in
this condition the ehci-hcd handshake routine will return -ETIMEDOUT and
the USB runtime suspend sequence will fail.  The STS_HLT bit will not be
set, so inspection of the frame index is used to test for the condition.

Add a new routine handshake_for_broken_root_hub() that is called after
an unsuccessful -ETIMEDOUT handshake.  On PS3 handshake_for_broken_root_hub()
will test for the condition, and if found will return success to allow the
USB suspend to complete.  For all other platforms
handshake_for_broken_root_hub() will return -ETIMEDOUT

Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
2011-12-08 09:38:53 -08:00
Geoff Levand 9187bef2fa usb: PS3 EHCI HC reset work-around
PS3 EHCI HC errata fix 316 - The PS3 EHCI HC will reset its
internal INSNREGXX setup regs back to the chip default values
on Host Controller Reset (CMD_RESET) or Light Host Controller
Reset (CMD_LRESET).  The work-around for this is for the HC
driver to re-initialise these regs when ever the HC is reset.

Adds a new helper routine ps3_ehci_setup_insnreg() which is
called from ps3_ehci_hc_reset().

Signed-off-by: Geoff Levand <geoff@infradead.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
2011-12-08 09:38:53 -08:00
Geoff Levand 876e0df902 usb: Remove ehci_reset call from ehci_run
Remove the ehci_reset() call done in the ehci_run() routine of the
USB EHCI host controller driver and add an ehci_reset() call to the
probe processing of all EHCI platform drivers that do not already call
ehci_reset().

The call to ehci_reset() from ehci_run() was problematic for several
platform drivers, and unnecessary for others.  This change moves the
decision to call ehci_reset() at driver startup to the platform
driver code.

Signed-off-by: Geoff Levand <geoff@infradead.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
2011-12-08 09:38:53 -08:00
Olof Johansson 4a53f4e692 USB: ehci-tegra: add probing through device tree
Rely on platform_data being passed through auxdata for now; more elaborate
bindings for phy config and tunings to be added.

v2: moved vbus-gpio check to the helper function, added check for !of_node,
    added usb2 clock to board-dt table.

Signed-off-by: Olof Johansson <olof@lixom.net>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
2011-12-07 20:47:48 -08:00
Gabor Juhos 9d6b204f93 USB: ehci-ath79: Add device_id entry for the AR933X SoCs
Also make the USB_EHCI_ATH79 selectable for the AR933X SoCs.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Kathy Giori <kgiori@qca.qualcomm.com>
Cc: "Luis R.  Rodriguez" <rodrigue@qca.qualcomm.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: linux-usb@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/2529/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07 22:02:46 +00:00
Manuel Lauss 809f36c6f4 MIPS: Alchemy: Au1300 SoC support
Add basic support for the Au1300 variant(s):
- New GPIO/Interrupt controller
- DBDMA ids
- USB setup
- MMC support
- enable various PSC drivers
- detection code.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2866/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07 22:02:05 +00:00
David S. Miller 959327c784 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2011-12-06 21:10:05 -05:00
Paul Bolle 90802ed9c3 treewide: Fix comment and string typo 'bufer'
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-12-06 09:53:40 +01:00
David S. Miller b3613118eb Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2011-12-02 13:49:21 -05:00
Justin P. Mattock 42b2aa86c6 treewide: Fix typos in various parts of the kernel, and fix some comments.
The below patch fixes some typos in various parts of the kernel, as well as fixes some comments.
Please let me know if I missed anything, and I will try to get it changed and resent.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-12-02 14:57:31 +01:00
Greg Kroah-Hartman 8593b6f6b0 Merge branch 'for-usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-linus
* 'for-usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci:
  Revert "xHCI: reset-on-resume quirk for NEC uPD720200"
  xHCI: fix bug in xhci_clear_command_ring()
2011-12-01 11:11:52 -08:00
Marcin Kościelnicki 307369b0ca usb: ftdi_sio: add PID for Propox ISPcable III
Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-01 10:42:22 -08:00
Sarah Sharp 0de13500ad Revert "xHCI: reset-on-resume quirk for NEC uPD720200"
This reverts commit df711fc996.

The commit added a reset-on-resume quirk because the NEC chipset stopped
responding to commands about 30 minutes after a system resume from
suspend.  We thought it was a chipset issue, but it turns out that the
xHCI driver was zeroing out the link TRB after a successful context
restore during resume.  The host controller would fall off the command
ring sometime later, causing it to not respond to new commands.

The link TRB issue has been fixed with commit
158886cd2c "xHCI: fix bug in
xhci_clear_command_ring()", so revert the reset-on-resume quirk, as it's
not necessary.

Commit df711fc996 was marked for stable
trees back to 2.6.37, but according to my mail, it has not made it into
Linus' tree or the stable trees yet.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Tested-by: Julian Sikorski <belegdol@gmail.com>
Cc: Andiry Xu <andiry.xu@amd.com>
2011-12-01 10:41:40 -08:00
Andiry Xu 158886cd2c xHCI: fix bug in xhci_clear_command_ring()
When system enters suspend, xHCI driver clears command ring by writing zero
to all the TRBs. However, this also writes zero to the Link TRB, and the ring
is mangled. This may cause driver accesses wrong memory address and the
result is unpredicted.

When clear the command ring, keep the last Link TRB intact, only clear its
cycle bit. This should fix the "command ring full" issue reported by Oliver
Neukum.

This should be backported to stable kernels as old as 2.6.37, since the
commit 89821320 "xhci: Fix command ring replay after resume" is merged.

Signed-off-by: Andiry Xu <andiry.xu@amd.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Reported-by: Oliver Neukum <oneukum@suse.de>
2011-12-01 10:38:27 -08:00
Jingoo Han b870defebd USB: ohci-s3c2410: add PM support
This patch adds power management support such as suspend and resume
functions.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-30 20:08:26 +09:00
Jean-Christophe PLAGNIOL-VILLARD 3285e0ec08 ARM: at91/udc: use gpio_is_valid to check the gpio
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-11-29 15:46:18 +00:00
Jean-Christophe PLAGNIOL-VILLARD 8a7a49d18b ARM: at91/ohci: use gpio_is_valid to check the gpio
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-11-29 15:46:17 +00:00
Li Yang 6414e94c20 usb: gadget: fsl_udc: fix dequeuing a request in progress
The original implementation of dequeuing a request in progress
is not correct.  Change to use a correct process and also clean
up the related functions a little bit.

Signed-off-by: Li Yang <leoli@freescale.com>
Acked-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-29 23:19:04 +09:00
Fabio Estevam 5ce1d0eb1c usb: fsl_mxc_udc.c: Remove compile-time dependency of MX35 SoC type
In order to support multiple SoC kernel image, compile-time dependency
on a specific SoC type should be avoided.

fsl_udc_clk_finalize is already protected by cpu_is_mx35(), so remove
the compile-time check for CONFIG_SOC_IMX35.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-29 23:19:04 +09:00
Fabio Estevam 65cd5c4d03 usb: fsl_mxc_udc.c: Fix build issue by including missing header file
Fix the following build error:

CC [M]  drivers/usb/gadget/fsl_mxc_udc.o
drivers/usb/gadget/fsl_mxc_udc.c: In function 'fsl_udc_clk_finalize':
drivers/usb/gadget/fsl_mxc_udc.c:98: error: implicit declaration of function 'readl'
drivers/usb/gadget/fsl_mxc_udc.c💯 error: implicit declaration of function 'writel'

This error is caused by the follwing commit:
(16fcb63: arm/imx: remove mx31_setup_weimcs( ) from mx31.h)

,which removed '#include <linux/io.h>' from mx31.h.

fsl_mxc_udc.c includes <mach/hardware.h>, which in turns includes mx31.h, so
that's the reason fsl_mxc_udc.c built fine previously.

Instead of relying on the indirect inclusion of the linux/io.h header file,
include it directly in fsl_mxc_udc.c.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-29 23:19:04 +09:00
Peter Chen 7c91d908f5 USB: fsl_udc_core: use usb_endpoint_xfer_isoc to judge ISO XFER
Some ISO gadgets, like audio, has SYNC attribute as well as
USB_ENDPOINT_XFER_ISOC for their bmAttributes at ISO endpoint
descriptor. So, it needs to use usb_endpoint_xfer_isoc to judge
ISO XFER.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Acked-by: Li Yang <leoli@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-29 23:19:04 +09:00
Michal Nazarewicz bfe0658b40 usb: udc: Fix gadget driver's speed check in various UDC drivers
Several UDC drivers had a gadget driver's speed sanity check of the
form of:

	driver->speed != USB_SPEED_HIGH

or:

	driver->speed != USB_SPEED_HIGH && driver->speed != USB_SPEED_FULL

As more and more gadget drivers support USB SuperSpeed, driver->speed
may be set to USB_SPEED_SUPER and UDC driver should handle such gadget
correctly.  The above checks however fail to recognise USB_SPEED_SUPER
as a valid speed.

This commit changes the two checks to:

	driver->speed < USB_SPEED_HIGH

or:

	driver->speed < USB_SPEED_FULL

respectively.

Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Reported-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-29 23:19:04 +09:00
Robert Jarzmik fef6964452 usb: gadget: fix g_serial regression
Commit "usb: gadget: use config_ep_by_speed() instead of
ep_choose()" broke g_serial in "non ACM nor OBEX"
mode. Apply a trivial fix on usb endpoints discovery.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-29 23:19:03 +09:00
Kuninori Morimoto 89f829a50f usb: renesas_usbhs: fixup driver speed
This patch cares latest USB_SPEED_SUPER support.
renesas_usbhs can not use super-speed, but can use full/high speed.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-29 23:19:03 +09:00
Kuninori Morimoto 0cdd7d4b66 usb: renesas_usbhs: fixup gadget.dev.driver when udc_stop.
current renesas_usbhs is using new style udc_start/stop from
af1d7056a5
(usb: gadget: renesas: convert to new style).

But current renesas_usbhs driver didn't care about gadget.dev.driver
when udc_stop. it cause rmmod oops.
This patch care it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-29 23:19:03 +09:00
Kuninori Morimoto 8885a897c2 usb: renesas_usbhs: fixup signal the driver that cable was disconnected
current renesas_usbhs is using new style udc_start/stop from
af1d7056a5
(usb: gadget: renesas: convert to new style).

cable disconnected signal was needed.
This patch fixup it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-29 23:19:03 +09:00
Kuninori Morimoto f8eff0a061 usb: renesas_usbhs: fixup device_register timing
current renesas_usbhs is using new style udc_start/stop from
af1d7056a5
(usb: gadget: renesas: convert to new style).

But bind() function will fail if it was called before
device_register() (or device_add()).
This patch modifies this issue.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-29 23:19:03 +09:00
Kevin Hilman 5d193ce8f1 usb: musb: PM: fix context save/restore in suspend/resume path
Currently the driver tries to save context in the suspend path, but
will cause an abort if the device is already runtime suspended.  This
happens, for example, if MUSB loaded/compiled-in, in host mode, but no
USB devices are attached.  MUSB will be runtime suspended, but then
attempting a system suspend will crash due to the context save
being attempted while the device is disabled.

On OMAP, as of v3.1, the driver's ->runtime_suspend() callback will be
called late in the suspend path (by the PM domain layer) if the driver
is not already runtime suspended, ensuring a full shutdown.

Therefore, the context save is not needed in the ->suspend() method
since it will be called in the ->runtime_suspend() method anyways
(similarily for resume.)

NOTE: this leaves the suspend/resume methods basically empty (with
      some FIXMEs and comments, but I'll leave it to the maintainers
      to decide whether to remove them.

Cc: stable@vger.kernel.org
Signed-off-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-29 23:19:03 +09:00
Matthieu CASTET e3420901eb EHCI : Fix a regression in the ISO scheduler
Fix a regression that was introduced by commit
811c926c53 (USB: EHCI: fix HUB TT scheduling
issue with iso transfer).

We detect an error if next == start, but this means uframe 0 can't be allocated
anymore for iso transfer...

Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-29 09:59:29 +09:00
Andiry Xu df711fc996 xHCI: reset-on-resume quirk for NEC uPD720200
Julian Sikorski reports NEC uPD720200 does not work stable after suspend
and resume. Re-initialize the host in xhci_resume().

This should be backported to stable kernels as old as 2.6.37.  The
kernel will need to include
commit c877b3b2ad
"xhci: Add reset on resume quirk for asrock p67 host"
for this patch to work.

Signed-off-by: Andiry Xu <andiry.xu@amd.com>
Reported-by: Julian Sikorski <belegdol@gmail.com>
Tested-by: Julian Sikorski <belegdol@gmail.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2011-11-28 10:22:26 -08:00
Axel Lin cc27c96c2b usb: convert drivers/usb/* to use module_platform_driver()
This patch converts the drivers in drivers/usb/* to use the
module_platform_driver() macro which makes the code smaller and a bit
simpler.

Cc: Felipe Balbi <balbi@ti.com>
Cc: Li Yang <leoli@freescale.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-28 06:48:32 +09:00
Arvid Brodin c64391f264 usb/isp1760: Fix race condition memory leak
This fixes a memory leak reported by Catalin Marinas:

schedule_ptds() is called from isp1760_irq() and removes the qh from the
controlqhs queue but ep->hcpriv still points to the qh and therefore it is not
freed.

Shortly after this, the isp1760_endpoint_disable() function sets ep->hcpriv to
NULL and calls schedule_ptds() but since the corresponding qh is no longer in
the queue, it is simply forgotten and reported by kmemleak.

With this patch, the qh is always freed at endpoint_disable, instead, and the
corresponding entry removed from the queue head list.

While I was at it, I also replaced the lines in isp1760_endpoint_disable()
that removed remaining qtds from the qh with a WARN_ON check for non-empty qh,
in line with earlier comments from Alan Stern (linux-usb list, 2011-07-20).

Signed-off-by: Arvid Brodin <arvid.brodin@enea.com>
Tested-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-26 20:02:47 -08:00
Arvid Brodin e08f6a2790 usb/isp1760: Simpler queue head list code.
Small code refactoring to ease the real fix in patch #2.

Signed-off-by: Arvid Brodin <arvid.brodin@enea.com>
Tested-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-26 20:02:47 -08:00
Aman Deep c842114792 xHCI: Adding #define values used for hub descriptor
xhci-hub used some numerical values for initialisation of root hub
descriptors. #define values are addded in usb 2.0 hub specification
file and these values are used for root hub characteristics
initialisation.

Also use some #defines in places where magic numbers are being used.

Signed-off-by: Aman Deep <amandeep3986@gmail.com>
Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-26 19:58:47 -08:00
Neil Zhang ceb2560348 USB: OTG should be linked before Host
For OTG controller, the host driver will call function
otg_get_transceiver to get the otg transceiver, so we need to init the
OTG driver before HOST.

Signed-off-by: Neil Zhang <zhangwm@marvell.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-26 19:58:47 -08:00
Andrew Worsley c515598e0f USB: serial: ftdi_sio: Handle the old_termios == 0 case e.g. uart_resume_port()
Handle null old_termios in ftdi_set_termios() calls from uart_resume_port().

Signed-off-by: Andrew Worsley <amworsley@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-26 19:58:47 -08:00
Davidlohr Bueso 568987116e USB: remove BKL comments
The BKL is a gonner.

Signed-off-by: Davidlohr Bueso <dave@gnu.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-26 19:58:46 -08:00
Dan Carpenter 8746c83d53 USB: whci-hcd: fix endian conversion in qset_clear()
qset->qh.link is an __le64 field and we should be using cpu_to_le64()
to fill it.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-26 19:56:48 -08:00
Qinglin Ye cec28a5428 USB: usb-storage: unusual_devs entry for Kingston DT 101 G2
Kingston DT 101 G2 replies a wrong tag while transporting, add an
unusal_devs entry to ignore the tag validation.

Signed-off-by: Qinglin Ye <yestyle@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-26 19:56:47 -08:00
Veli-Pekka Peltola ec0cd94d88 usb: option: add SIMCom SIM5218
Tested with SIM5218EVB-KIT evaluation kit.

Signed-off-by: Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-26 19:56:47 -08:00
Dirk Nehring 46b1848360 usb: option: add Huawei E353 controlling interfaces
This patch creates the missing controlling devices for the Huawei E353
HSPA+ stick.

Signed-off-by: Dirk Nehring <dnehring@gmx.net>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-26 19:56:47 -08:00
Greg Kroah-Hartman 47b649590d Merge 3.2-rc3 into usb-linus
This pulls in the latest USB bugfixes and helps a few of the drivers
merge nicer in the future due to changes in both branches.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-26 19:46:48 -08:00
Rafael J. Wysocki 986b11c3ee Merge branch 'pm-freezer' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc into pm-freezer
* 'pm-freezer' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc: (24 commits)
  freezer: fix wait_event_freezable/__thaw_task races
  freezer: kill unused set_freezable_with_signal()
  dmatest: don't use set_freezable_with_signal()
  usb_storage: don't use set_freezable_with_signal()
  freezer: remove unused @sig_only from freeze_task()
  freezer: use lock_task_sighand() in fake_signal_wake_up()
  freezer: restructure __refrigerator()
  freezer: fix set_freezable[_with_signal]() race
  freezer: remove should_send_signal() and update frozen()
  freezer: remove now unused TIF_FREEZE
  freezer: make freezing() test freeze conditions in effect instead of TIF_FREEZE
  cgroup_freezer: prepare for removal of TIF_FREEZE
  freezer: clean up freeze_processes() failure path
  freezer: kill PF_FREEZING
  freezer: test freezable conditions while holding freezer_lock
  freezer: make freezing indicate freeze condition in effect
  freezer: use dedicated lock instead of task_lock() + memory barrier
  freezer: don't distinguish nosig tasks on thaw
  freezer: remove racy clear_freeze_flag() and set PF_NOFREEZE on dead tasks
  freezer: rename thaw_process() to __thaw_task() and simplify the implementation
  ...
2011-11-23 21:09:02 +01:00
Eric Dumazet 1f2149c1df net: remove netdev_alloc_page and use __GFP_COLD
Given we dont use anymore the struct net_device *dev argument, and this
interface brings litle benefit, remove netdev_{alloc|free}_page(), to
debloat include/linux/skbuff.h a bit.

(Some drivers used a mix of these interfaces and alloc_pages())

When allocating a page given to device for DMA transfer (device to
memory), it makes sense to use a cold one (__GFP_COLD)

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
CC: Dimitris Michailidis <dm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-22 16:43:32 -05:00
Linus Torvalds 3c688149ce Merge branch 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (48 commits)
  USB: Fix Corruption issue in USB ftdi driver ftdi_sio.c
  USB: option: add PID of Huawei E173s 3G modem
  OHCI: final fix for NVIDIA problems (I hope)
  USB: option: release new PID for ZTE 3G modem
  usb: Netlogic: Fix HC_LENGTH call in ehci-xls.c
  USB: storage: ene_ub6250: fix compile warnings
  USB: option: add id for 3G dongle Model VT1000 of Viettel
  USB: serial: pl2303: rm duplicate id
  USB: pch_udc: Change company name OKI SEMICONDUCTOR to LAPIS Semiconductor
  USB: pch_udc: Support new device LAPIS Semiconductor ML7831 IOH
  usb-storage: Accept 8020i-protocol commands longer than 12 bytes
  USB: quirks: adding more quirky webcams to avoid squeaky audio
  powerpc/usb: fix type cast for address of ioremap to compatible with 64-bit
  USB: at91: at91-ohci: fix set/get power
  USB: cdc-acm: Fix disconnect() vs close() race
  USB: add quirk for Logitech C600 web cam
  USB: EHCI: fix HUB TT scheduling issue with iso transfer
  USB: XHCI: resume root hubs when the controller resumes
  USB: workaround for bug in old version of GCC
  USB: ark3116 initialisation fix
  ...
2011-11-21 20:37:11 -08:00
Tejun Heo ec012476af usb_storage: don't use set_freezable_with_signal()
The current implementation of set_freezable_with_signal() is buggy and
tricky to get right.  usb-storage is the only user and its use can be
avoided trivially.

All usb-storage wants is to be able to sleep with timeout and get
woken up if freezing() becomes true.  This can be trivially
implemented by doing interruptible wait w/ freezing() included in the
wait condition.  There's no reason to use set_freezable_with_signal().

Perform interruptible wait on freezing() instead of using
set_freezable_with_signal(), which is scheduled for removal.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Seth Forshee <seth.forshee@canonical.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-21 12:32:26 -08:00
Linus Torvalds 6fe4c6d466 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (86 commits)
  ipv4: fix redirect handling
  ping: dont increment ICMP_MIB_INERRORS
  sky2: fix hang in napi_disable
  sky2: enforce minimum ring size
  bonding: Don't allow mode change via sysfs with slaves present
  f_phonet: fix page offset of first received fragment
  stmmac: fix pm functions avoiding sleep on spinlock
  stmmac: remove spin_lock in stmmac_ioctl.
  stmmac: parameters auto-tuning through HW cap reg
  stmmac: fix advertising 1000Base capabilties for non GMII iface
  stmmac: use mdelay on timeout of sw reset
  sky2: version 1.30
  sky2: used fixed RSS key
  sky2: reduce default Tx ring size
  sky2: rename up/down functions
  sky2: pci posting issues
  sky2: fix hang on shutdown (and other irq issues)
  r6040: fix check against MCRO_HASHEN bit in r6040_multicast_list
  MAINTAINERS: change email address for shemminger
  pch_gbe: Move #include of module.h
  ...
2011-11-20 14:59:33 -08:00
Dan Delaney 789aaa2ee0 HID/usbled: add support for Dream Cheeky DL100B Mailbox Friends Alert
Adding support for Dream Cheeky DL1800B Friend Alert device.

Signed-off-by: Dan Delaney <drdelaney@loclhst.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-20 10:21:30 +01:00