When competing sync(2) calls walk the same filesystem, they need to
walk the list of inodes on the superblock to find all the inodes
that we need to wait for IO completion on. However, when multiple
wait_sb_inodes() calls do this at the same time, they contend on the
the inode_sb_list_lock and the contention causes system wide
slowdowns. In effect, concurrent sync(2) calls can take longer and
burn more CPU than if they were serialised.
Stop the worst of the contention by adding a per-sb mutex to wrap
around wait_sb_inodes() so that we only execute one sync(2) IO
completion walk per superblock superblock at a time and hence avoid
contention being triggered by concurrent sync(2) calls.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Dave Chinner <dchinner@redhat.com>
The process of reducing contention on per-superblock inode lists
starts with moving the locking to match the per-superblock inode
list. This takes the global lock out of the picture and reduces the
contention problems to within a single filesystem. This doesn't get
rid of contention as the locks still have global CPU scope, but it
does isolate operations on different superblocks form each other.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Dave Chinner <dchinner@redhat.com>
Doing writeback on lots of little files causes terrible IOPS storms
because of the per-mapping writeback plugging we do. This
essentially causes imeediate dispatch of IO for each mapping,
regardless of the context in which writeback is occurring.
IOWs, running a concurrent write-lots-of-small 4k files using fsmark
on XFS results in a huge number of IOPS being issued for data
writes. Metadata writes are sorted and plugged at a high level by
XFS, so aggregate nicely into large IOs. However, data writeback IOs
are dispatched in individual 4k IOs, even when the blocks of two
consecutively written files are adjacent.
Test VM: 8p, 8GB RAM, 4xSSD in RAID0, 100TB sparse XFS filesystem,
metadata CRCs enabled.
Kernel: 3.10-rc5 + xfsdev + my 3.11 xfs queue (~70 patches)
Test:
$ ./fs_mark -D 10000 -S0 -n 10000 -s 4096 -L 120 -d
/mnt/scratch/0 -d /mnt/scratch/1 -d /mnt/scratch/2 -d
/mnt/scratch/3 -d /mnt/scratch/4 -d /mnt/scratch/5 -d
/mnt/scratch/6 -d /mnt/scratch/7
Result:
wall sys create rate Physical write IO
time CPU (avg files/s) IOPS Bandwidth
----- ----- ------------ ------ ---------
unpatched 6m56s 15m47s 24,000+/-500 26,000 130MB/s
patched 5m06s 13m28s 32,800+/-600 1,500 180MB/s
improvement -26.44% -14.68% +36.67% -94.23% +38.46%
If I use zero length files, this workload at about 500 IOPS, so
plugging drops the data IOs from roughly 25,500/s to 1000/s.
3 lines of code, 35% better throughput for 15% less CPU.
The benefits of plugging at this layer are likely to be higher for
spinning media as the IO patterns for this workload are going make a
much bigger difference on high IO latency devices.....
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Tested-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
bio_associate_blkcg(), bio_associate_current() and wbc_account_io()
are used to implement cgroup writeback support for filesystems and
thus need to be exported. Export them.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jens Axboe <axboe@fb.com>
Currently, even when a filesystem doesn't set the FS_CGROUP_WRITEBACK
flag, if the filesystem uses wbc_init_bio() and wbc_account_io(), the
foreign inode detection and migration logic still ends up activating
cgroup writeback which is unexpected. This patch ensures that the
foreign inode detection logic stays disabled when inode_cgwb_enabled()
is false by not associating writeback_control's with bdi_writeback's.
This also avoids unnecessary operations in wbc_init_bio(),
wbc_account_io() and wbc_detach_inode() for filesystems which don't
support cgroup writeback.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
For the purpose of foreign inode detection, wb's (bdi_writeback's) are
identified by the associated memcg ID. As we create a separate wb for
each memcg, this is enough to identify the active wb's; however, when
blkcg is enabled or disabled higher up in the hierarchy, the mapping
between memcg and blkcg changes which in turn creates a new wb to
service the new mapping. The old wb is unlinked from index and
released after all references are drained. The foreign inode
detection logic can't detect this condition because both the old and
new wb's point to the same memcg and thus never decides to move inodes
attached to the old wb to the new one.
This patch adds logic to initiate switching immediately in
wbc_attach_and_unlock_inode() if the associated wb is dying. We can
make the usual foreign detection logic to distinguish the different
wb's mapped to the memcg but the dying wb is never gonna be in active
service again and there's no point in tracking the usage history and
reaching the switch verdict after enough data points are collected.
It's already known that the wb has to be switched.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
As concurrent write sharing of an inode is expected to be very rare
and memcg only tracks page ownership on first-use basis severely
confining the usefulness of such sharing, cgroup writeback tracks
ownership per-inode. While the support for concurrent write sharing
of an inode is deemed unnecessary, an inode being written to by
different cgroups at different points in time is a lot more common,
and, more importantly, charging only by first-use can too readily lead
to grossly incorrect behaviors (single foreign page can lead to
gigabytes of writeback to be incorrectly attributed).
To resolve this issue, cgroup writeback detects the majority dirtier
of an inode and transfers the ownership to it. The previous patches
implemented the foreign condition detection mechanism and laid the
groundwork. This patch implements the actual switching.
With the previously implemented [unlocked_]inode_to_wb_and_list_lock()
and wb stat transaction, grabbing wb->list_lock, inode->i_lock and
mapping->tree_lock gives us full exclusion against all wb operations
on the target inode. inode_switch_wb_work_fn() grabs all the locks
and transfers the inode atomically along with its RECLAIMABLE and
WRITEBACK stats.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
With the previous three patches, all operations which acquire wb from
inode are either under one of inode->i_lock, mapping->tree_lock or
wb->list_lock or protected by unlocked_inode_to_wb transaction. This
will be depended upon by foreign inode wb switching.
This patch adds lockdep assertion to inode_to_wb() so that usages
outside the above list locks can be caught easily. There are three
exceptions.
* locked_inode_to_wb_and_lock_list() is holding wb->list_lock but the
wb may not be the inode's. Ensuring that is the function's role
after all. Updated to deref inode->i_wb directly.
* inode_wb_stat_unlocked_begin() is usually protected by combination
of !I_WB_SWITCH and rcu_read_lock(). Updated to deref inode->i_wb
directly.
* inode_congested() wants to test whether inode->i_wb is set before
starting the transaction. Added inode_to_wb_is_valid() which tests
inode->i_wb directly.
v5: might_lock() removed. It annotates that the lock is grabbed w/
irq enabled which isn't the case and triggering lockdep warning
spuriously.
v4: might_lock() added to unlocked_inode_to_wb_begin().
v3: inode_congested() conversion added.
v2: locked_inode_to_wb_and_lock_list() was missing in the first
version.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Similar to wb stat updates, inode_congested() accesses the associated
wb of an inode locklessly, which will break with foreign inode wb
switching. This path updates inode_congested() to use unlocked inode
wb access transaction introduced by the previous patch.
Combined with the previous two patches, this makes all wb list and
access operations to be protected by either of inode->i_lock,
wb->list_lock, or mapping->tree_lock while wb switching is in
progress.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The mechanism for detecting whether an inode should switch its wb
(bdi_writeback) association is now in place. This patch build the
framework for the actual switching.
This patch adds a new inode flag I_WB_SWITCHING, which has two
functions. First, the easy one, it ensures that there's only one
switching in progress for a give inode. Second, it's used as a
mechanism to synchronize wb stat updates.
The two stats, WB_RECLAIMABLE and WB_WRITEBACK, aren't event counters
but track the current number of dirty pages and pages under writeback
respectively. As such, when an inode is moved from one wb to another,
the inode's portion of those stats have to be transferred together;
unfortunately, this is a bit tricky as those stat updates are percpu
operations which are performed without holding any lock in some
places.
This patch solves the problem in a similar way as memcg. Each such
lockless stat updates are wrapped in transaction surrounded by
unlocked_inode_to_wb_begin/end(). During normal operation, they map
to rcu_read_lock/unlock(); however, if I_WB_SWITCHING is asserted,
mapping->tree_lock is grabbed across the transaction.
In turn, the switching path sets I_WB_SWITCHING and waits for a RCU
grace period to pass before actually starting to switch, which
guarantees that all stat update paths are synchronizing against
mapping->tree_lock.
This patch still doesn't implement the actual switching.
v3: Updated on top of the recent cancel_dirty_page() updates.
unlocked_inode_to_wb_begin() now nests inside
mem_cgroup_begin_page_stat() to match the locking order.
v2: The i_wb access transaction will be used for !stat accesses too.
Function names and comments updated accordingly.
s/inode_wb_stat_unlocked_{begin|end}/unlocked_inode_to_wb_{begin|end}/
s/switch_wb/switch_wbs/
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
cgroup writeback currently assumes that inode to wb association
doesn't change; however, with the planned foreign inode wb switching
mechanism, the association will change dynamically.
When an inode needs to be put on one of the IO lists of its wb, the
current code simply calls inode_to_wb() and locks the returned wb;
however, with the planned wb switching, the association may change
before locking the wb and may even get released.
This patch implements [locked_]inode_to_wb_and_lock_list() which pins
the associated wb while holding i_lock, releases it, acquires
wb->list_lock and verifies that the association hasn't changed
inbetween. As the association will be protected by both locks among
other things, this guarantees that the wb is the inode's associated wb
until the list_lock is released.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
As concurrent write sharing of an inode is expected to be very rare
and memcg only tracks page ownership on first-use basis severely
confining the usefulness of such sharing, cgroup writeback tracks
ownership per-inode. While the support for concurrent write sharing
of an inode is deemed unnecessary, an inode being written to by
different cgroups at different points in time is a lot more common,
and, more importantly, charging only by first-use can too readily lead
to grossly incorrect behaviors (single foreign page can lead to
gigabytes of writeback to be incorrectly attributed).
To resolve this issue, cgroup writeback detects the majority dirtier
of an inode and will transfer the ownership to it. To avoid
unnnecessary oscillation, the detection mechanism keeps track of
history and gives out the switch verdict only if the foreign usage
pattern is stable over a certain amount of time and/or writeback
attempts.
The detection mechanism has fairly low space and computation overhead.
It adds 8 bytes to struct inode (one int and two u16's) and minimal
amount of calculation per IO. The detection mechanism converges to
the correct answer usually in several seconds of IO time when there's
a clear majority dirtier. Even when there isn't, it can reach an
acceptable answer fairly quickly under most circumstances.
Please see wb_detach_inode() for more details.
This patch only implements detection. Following patches will
implement actual switching.
v2: wbc_account_io() now checks whether the wbc is associated with a
wb before dereferencing it. This can happen when pageout() is
writing pages directly without going through the usual writeback
path. As pageout() path is single-threaded, we don't want it to
be blocked behind a slow cgroup and ultimately want it to delegate
actual writing to the usual writeback path.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Currently, for cgroup writeback, the IO submission paths directly
associate the bio's with the blkcg from inode_to_wb_blkcg_css();
however, it'd be necessary to keep more writeback context to implement
foreign inode writeback detection. wbc (writeback_control) is the
natural fit for the extra context - it persists throughout the
writeback of each inode and is passed all the way down to IO
submission paths.
This patch adds wbc_attach_and_unlock_inode(), wbc_detach_inode(), and
wbc_attach_fdatawrite_inode() which are used to associate wbc with the
inode being written back. IO submission paths now use wbc_init_bio()
instead of directly associating bio's with blkcg themselves. This
leaves inode_to_wb_blkcg_css() w/o any user. The function is removed.
wbc currently only tracks the associated wb (bdi_writeback). Future
patches will add more for foreign inode detection. The association is
established under i_lock which will be depended upon when migrating
foreign inodes to other wb's.
As currently, once established, inode to wb association never changes,
going through wbc when initializing bio's doesn't cause any behavior
changes.
v2: submit_blk_blkcg() now checks whether the wbc is associated with a
wb before dereferencing it. This can happen when pageout() is
writing pages directly without going through the usual writeback
path. As pageout() path is single-threaded, we don't want it to
be blocked behind a slow cgroup and ultimately want it to delegate
actual writing to the usual writeback path.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Currently, majority of cgroup writeback support including all the
above functions are implemented in include/linux/backing-dev.h and
mm/backing-dev.c; however, the portion closely related to writeback
logic implemented in include/linux/writeback.h and mm/page-writeback.c
will expand to support foreign writeback detection and correction.
This patch moves wb[_try]_get() and wb_put() to
include/linux/backing-dev-defs.h so that they can be used from
writeback.h and inode_{attach|detach}_wb() to writeback.h and
page-writeback.c.
This is pure reorganization and doesn't introduce any functional
changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
and rename it to wb_over_bg_thresh(). The function is closely tied to
the dirty throttling mechanism implemented in page-writeback.c. This
relocation will allow future updates necessary for cgroup writeback
support.
While at it, add function comment.
This is pure reorganization and doesn't introduce any behavioral
changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This patch is a part of the series to define wb_domain which
represents a domain that wb's (bdi_writeback's) belong to and are
measured against each other in. This will enable IO backpressure
propagation for cgroup writeback.
global_dirty_limit exists to regulate the global dirty threshold which
is a property of the wb_domain. This patch moves hard_dirty_limit,
dirty_lock, and update_time into wb_domain.
This is pure reorganization and doesn't introduce any behavioral
changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
__wb_update_bandwidth() is called from two places -
fs/fs-writeback.c::balance_dirty_pages() and
mm/page-writeback.c::wb_writeback(). The latter updates only the
write bandwidth while the former also deals with the dirty ratelimit.
The two callsites are distinguished by whether @thresh parameter is
zero or not, which is cryptic. In addition, the two files define
their own different versions of wb_update_bandwidth() on top of
__wb_update_bandwidth(), which is confusing to say the least. This
patch cleans up [__]wb_update_bandwidth() in the following ways.
* __wb_update_bandwidth() now takes explicit @update_ratelimit
parameter to gate dirty ratelimit handling.
* mm/page-writeback.c::wb_update_bandwidth() is flattened into its
caller - balance_dirty_pages().
* fs/fs-writeback.c::wb_update_bandwidth() is moved to
mm/page-writeback.c and __wb_update_bandwidth() is made static.
* While at it, add a lockdep assertion to __wb_update_bandwidth().
Except for the lockdep addition, this is pure reorganization and
doesn't introduce any behavioral changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The function name wb_dirty_limit(), its argument @dirty and the local
variable @wb_dirty are mortally confusing given that the function
calculates per-wb threshold value not dirty pages, especially given
that @dirty and @wb_dirty are used elsewhere for dirty pages.
Let's rename the function to wb_calc_thresh() and wb_dirty to
wb_thresh.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
__mark_inode_dirty() always dirtied the inode against the root wb
(bdi_writeback). The previous patches added all the infrastructure
necessary to attribute an inode against the wb of the dirtying cgroup.
This patch updates __mark_inode_dirty() so that it uses the wb
associated with the inode instead of unconditionally using the root
one.
Currently, none of the filesystems has FS_CGROUP_WRITEBACK and all
pages will keep being dirtied against the root wb.
v2: Updated for per-inode wb association.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
[try_]writeback_inodes_sb[_nr]() and sync_inodes_sb() currently only
handle dirty inodes on the root wb (bdi_writeback) of the target bdi.
This patch implements bdi_split_work_to_wbs() and use it to make these
functions handle multiple wb's.
bdi_split_work_to_wbs() takes a base wb_writeback_work and create
clones of it and issue them to the wb's of the target bdi. The base
work's nr_pages is distributed using wb_split_bdi_pages() -
ie. according to each wb's write bandwidth's proportion in the bdi.
Cloning a bdi involves memory allocation which may fail. In such
cases, bdi_split_work_to_wbs() issues the base work directly and waits
for its completion before proceeding to the next wb to guarantee
forward progress and correctness under memory pressure.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
try_writeback_inodes_sb_nr() wraps writeback_inodes_sb_nr() so that it
handles s_umount locking and skips if writeback is already in
progress. The in progress test is performed on the root wb
(bdi_writeback) which isn't sufficient for cgroup writeback support.
The test must be done per-wb.
To prepare for the change, this patch factors out
__writeback_inodes_sb_nr() from writeback_inodes_sb_nr() and adds
@skip_if_busy and moves the in progress test right before queueing the
wb_writeback_work. try_writeback_inodes_sb_nr() now just grabs
s_umount and invokes __writeback_inodes_sb_nr() with asserted
@skip_if_busy. This way, later addition of multiple wb handling can
skip only the wb's which already have writeback in progress.
This swaps the order between in progress test and s_umount test which
can flip the return value when writeback is in progress and s_umount
is being held by someone else but this shouldn't cause any meaningful
difference. It's a fringe condition and the return value is an
unsynchronized hint anyway.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
For cgroup writeback, multiple wb_writeback_work items may need to be
issuedto accomplish a single task. The previous patch updated the
waiting mechanism such that wb_wait_for_completion() can wait for
multiple work items.
Issuing mulitple work items involves memory allocation which may fail.
As most writeback operations can't fail or blocked on memory
allocation, in such cases, we'll fall back to sequential issuing of an
on-stack work item, which would need to be waited upon sequentially.
This patch implements wb_wait_for_single_work() which waits for a
single work item independently from wb_completion waiting so that such
fallback mechanism can be used without getting tangled with the usual
issuing / completion operation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
If the completion of a wb_writeback_work can be waited upon by setting
its ->done to a struct completion and waiting on it; however, for
cgroup writeback support, it's necessary to issue multiple work items
to multiple bdi_writebacks and wait for the completion of all.
This patch implements wb_completion which can wait for multiple work
items and replaces the struct completion with it. It can be defined
using DEFINE_WB_COMPLETION_ONSTACK(), used for multiple work items and
waited for by wb_wait_for_completion().
Nobody currently issues multiple work items and this patch doesn't
introduce any behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Currently, a wb_writeback_work is freed automatically on completion if
it doesn't have ->done set. Add wb_writeback_work->auto_free to make
the switch explicit. This will help cgroup writeback support where
waiting for completion and whether to free automatically don't
necessarily move together.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
wakeup_dirtytime_writeback() currently only starts writeback on the
root wb (bdi_writeback). For cgroup writeback support, update the
function to check all wbs.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jens Axboe <axboe@fb.com>
wakeup_flusher_threads() currently only starts writeback on the root
wb (bdi_writeback). For cgroup writeback support, update the function
to wake up all wbs and distribute the number of pages to write
according to the proportion of each wb's write bandwidth, which is
implemented in wb_split_bdi_pages().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
bdi_start_background_writeback() currently takes @bdi and kicks the
root wb (bdi_writeback). In preparation for cgroup writeback support,
make it take wb instead.
This patch doesn't make any functional difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
writeback_in_progress() currently takes @bdi and returns whether
writeback is in progress on its root wb (bdi_writeback). In
preparation for cgroup writeback support, make it take wb instead.
While at it, make it an inline function.
This patch doesn't make any functional difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
bdi_start_writeback() is a thin wrapper on top of
__wb_start_writeback() which is used only by laptop_mode_timer_fn().
This patches removes bdi_start_writeback(), renames
__wb_start_writeback() to wb_start_writeback() and makes
laptop_mode_timer_fn() use it instead.
This doesn't cause any functional difference and will ease making
laptop_mode_timer_fn() cgroup writeback aware.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
There are several places in fs/fs-writeback.c which queues
wb_writeback_work without checking whether the target wb
(bdi_writeback) has dirty inodes or not. The only thing
wb_writeback_work does is writing back the dirty inodes for the target
wb and queueing a work item for a clean wb is essentially noop. There
are some side effects such as bandwidth stats being updated and
triggering tracepoints but these don't affect the operation in any
meaningful way.
This patch makes all writeback_inodes_sb_nr() and sync_inodes_sb()
skip wb_queue_work() if the target bdi is clean. Also, it moves
dirtiness check from wakeup_flusher_threads() to
__wb_start_writeback() so that all its callers benefit from the check.
While the overhead incurred by scheduling a noop work isn't currently
significant, the overhead may be higher with cgroup writeback support
as we may end up issuing noop work items to a lot of clean wb's.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
bdi_has_dirty_io() used to only reflect whether the root wb
(bdi_writeback) has dirty inodes. For cgroup writeback support, it
needs to take all active wb's into account. If any wb on the bdi has
dirty inodes, bdi_has_dirty_io() should return true.
To achieve that, as inode_wb_list_{move|del}_locked() now keep track
of the dirty state transition of each wb, the number of dirty wbs can
be counted in the bdi; however, bdi is already aggregating
wb->avg_write_bandwidth which can easily be guaranteed to be > 0 when
there are any dirty inodes by ensuring wb->avg_write_bandwidth can't
dip below 1. bdi_has_dirty_io() can simply test whether
bdi->tot_write_bandwidth is zero or not.
While this bumps the value of wb->avg_write_bandwidth to one when it
used to be zero, this shouldn't cause any meaningful behavior
difference.
bdi_has_dirty_io() is made an inline function which tests whether
->tot_write_bandwidth is non-zero. Also, WARN_ON_ONCE()'s on its
value are added to inode_wb_list_{move|del}_locked().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
cgroup writeback support needs to keep track of the sum of
avg_write_bandwidth of all wb's (bdi_writeback's) with dirty inodes to
distribute write workload. This patch adds bdi->tot_write_bandwidth
and updates inode_wb_list_move_locked(), inode_wb_list_del_locked()
and wb_update_write_bandwidth() to adjust it as wb's gain and lose
dirty inodes and its avg_write_bandwidth gets updated.
As the update events are not synchronized with each other,
bdi->tot_write_bandwidth is an atomic_long_t.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Currently, wb_has_dirty_io() determines whether a wb (bdi_writeback)
has any dirty inode by testing all three IO lists on each invocation
without actively keeping track. For cgroup writeback support, a
single bdi will host multiple wb's each of which will host dirty
inodes separately and we'll need to make bdi_has_dirty_io(), which
currently only represents the root wb, aggregate has_dirty_io from all
member wb's, which requires tracking transitions in has_dirty_io state
on each wb.
This patch introduces inode_wb_list_{move|del}_locked() to consolidate
IO list operations leaving queue_io() the only other function which
directly manipulates IO lists (via move_expired_inodes()). All three
functions are updated to call wb_io_lists_[de]populated() which keep
track of whether the wb has dirty inodes or not and record it using
the new WB_has_dirty_io flag. inode_wb_list_moved_locked()'s return
value indicates whether the wb had no dirty inodes before.
mark_inode_dirty() is restructured so that the return value of
inode_wb_list_move_locked() can be used for deciding whether to wake
up the wb.
While at it, change {bdi|wb}_has_dirty_io()'s return values to bool.
These functions were returning 0 and 1 before. Also, add a comment
explaining the synchronization of wb_state flags.
v2: Updated to accommodate b_dirty_time.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
In several places, bdi_congested() and its wrappers are used to
determine whether more IOs should be issued. With cgroup writeback
support, this question can't be answered solely based on the bdi
(backing_dev_info). It's dependent on whether the filesystem and bdi
support cgroup writeback and the blkcg the inode is associated with.
This patch implements inode_congested() and its wrappers which take
@inode and determines the congestion state considering cgroup
writeback. The new functions replace bdi_*congested() calls in places
where the query is about specific inode and task.
There are several filesystem users which also fit this criteria but
they should be updated when each filesystem implements cgroup
writeback support.
v2: Now that a given inode is associated with only one wb, congestion
state can be determined independent from the asking task. Drop
@task. Spotted by Vivek. Also, converted to take @inode instead
of @mapping and renamed to inode_congested().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
For the planned cgroup writeback support, on each bdi
(backing_dev_info), each memcg will be served by a separate wb
(bdi_writeback). This patch updates bdi so that a bdi can host
multiple wbs (bdi_writebacks).
On the default hierarchy, blkcg implicitly enables memcg. This allows
using memcg's page ownership for attributing writeback IOs, and every
memcg - blkcg combination can be served by its own wb by assigning a
dedicated wb to each memcg. This means that there may be multiple
wb's of a bdi mapped to the same blkcg. As congested state is per
blkcg - bdi combination, those wb's should share the same congested
state. This is achieved by tracking congested state via
bdi_writeback_congested structs which are keyed by blkcg.
bdi->wb remains unchanged and will keep serving the root cgroup.
cgwb's (cgroup wb's) for non-root cgroups are created on-demand or
looked up while dirtying an inode according to the memcg of the page
being dirtied or current task. Each cgwb is indexed on bdi->cgwb_tree
by its memcg id. Once an inode is associated with its wb, it can be
retrieved using inode_to_wb().
Currently, none of the filesystems has FS_CGROUP_WRITEBACK and all
pages will keep being associated with bdi->wb.
v3: inode_attach_wb() in account_page_dirtied() moved inside
mapping_cap_account_dirty() block where it's known to be !NULL.
Also, an unnecessary NULL check before kfree() removed. Both
detected by the kbuild bot.
v2: Updated so that wb association is per inode and wb is per memcg
rather than blkcg.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: kbuild test robot <fengguang.wu@intel.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Now that bdi definitions are moved to backing-dev-defs.h,
backing-dev.h can include blkdev.h and inline inode_to_bdi() without
worrying about introducing circular include dependency. The function
gets called from hot paths and fairly trivial.
This patch makes inode_to_bdi() and sb_is_blkdev_sb() that the
function calls inline. blockdev_superblock and noop_backing_dev_info
are EXPORT_GPL'd to allow the inline functions to be used from
modules.
While at it, make sb_is_blkdev_sb() return bool instead of int.
v2: Fixed typo in description as suggested by Jan.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback)
and the role of the separation is unclear. For cgroup support for
writeback IOs, a bdi will be updated to host multiple wb's where each
wb serves writeback IOs of a different cgroup on the bdi. To achieve
that, a wb should carry all states necessary for servicing writeback
IOs for a cgroup independently.
This patch moves bdi->wb_lock and ->worklist into wb.
* The lock protects bdi->worklist and bdi->wb.dwork scheduling. While
moving, rename it to wb->work_lock as wb->wb_lock is confusing.
Also, move wb->dwork downwards so that it's colocated with the new
->work_lock and ->work_list fields.
* bdi_writeback_workfn() -> wb_workfn()
bdi_wakeup_thread_delayed(bdi) -> wb_wakeup_delayed(wb)
bdi_wakeup_thread(bdi) -> wb_wakeup(wb)
bdi_queue_work(bdi, ...) -> wb_queue_work(wb, ...)
__bdi_start_writeback(bdi, ...) -> __wb_start_writeback(wb, ...)
get_next_work_item(bdi) -> get_next_work_item(wb)
* bdi_wb_shutdown() is renamed to wb_shutdown() and now takes @wb.
The function contained parts which belong to the containing bdi
rather than the wb itself - testing cap_writeback_dirty and
bdi_remove_from_list() invocation. Those are moved to
bdi_unregister().
* bdi_wb_{init|exit}() are renamed to wb_{init|exit}().
Initializations of the moved bdi->wb_lock and ->work_list are
relocated from bdi_init() to wb_init().
* As there's still only one bdi_writeback per backing_dev_info, all
uses of bdi->state are mechanically replaced with bdi->wb.state
introducing no behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback)
and the role of the separation is unclear. For cgroup support for
writeback IOs, a bdi will be updated to host multiple wb's where each
wb serves writeback IOs of a different cgroup on the bdi. To achieve
that, a wb should carry all states necessary for servicing writeback
IOs for a cgroup independently.
This patch moves bandwidth related fields from backing_dev_info into
bdi_writeback.
* The moved fields are: bw_time_stamp, dirtied_stamp, written_stamp,
write_bandwidth, avg_write_bandwidth, dirty_ratelimit,
balanced_dirty_ratelimit, completions and dirty_exceeded.
* writeback_chunk_size() and over_bground_thresh() now take @wb
instead of @bdi.
* bdi_writeout_fraction(bdi, ...) -> wb_writeout_fraction(wb, ...)
bdi_dirty_limit(bdi, ...) -> wb_dirty_limit(wb, ...)
bdi_position_ration(bdi, ...) -> wb_position_ratio(wb, ...)
bdi_update_writebandwidth(bdi, ...) -> wb_update_write_bandwidth(wb, ...)
[__]bdi_update_bandwidth(bdi, ...) -> [__]wb_update_bandwidth(wb, ...)
bdi_{max|min}_pause(bdi, ...) -> wb_{max|min}_pause(wb, ...)
bdi_dirty_limits(bdi, ...) -> wb_dirty_limits(wb, ...)
* Init/exits of the relocated fields are moved to bdi_wb_init/exit()
respectively. Note that explicit zeroing is dropped in the process
as wb's are cleared in entirety anyway.
* As there's still only one bdi_writeback per backing_dev_info, all
uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[]
introducing no behavior changes.
v2: Typo in description fixed as suggested by Jan.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback)
and the role of the separation is unclear. For cgroup support for
writeback IOs, a bdi will be updated to host multiple wb's where each
wb serves writeback IOs of a different cgroup on the bdi. To achieve
that, a wb should carry all states necessary for servicing writeback
IOs for a cgroup independently.
This patch moves bdi->bdi_stat[] into wb.
* enum bdi_stat_item is renamed to wb_stat_item and the prefix of all
enums is changed from BDI_ to WB_.
* BDI_STAT_BATCH() -> WB_STAT_BATCH()
* [__]{add|inc|dec|sum}_wb_stat(bdi, ...) -> [__]{add|inc}_wb_stat(wb, ...)
* bdi_stat[_error]() -> wb_stat[_error]()
* bdi_writeout_inc() -> wb_writeout_inc()
* stat init is moved to bdi_wb_init() and bdi_wb_exit() is added and
frees stat.
* As there's still only one bdi_writeback per backing_dev_info, all
uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[]
introducing no behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback)
and the role of the separation is unclear. For cgroup support for
writeback IOs, a bdi will be updated to host multiple wb's where each
wb serves writeback IOs of a different cgroup on the bdi. To achieve
that, a wb should carry all states necessary for servicing writeback
IOs for a cgroup independently.
This patch moves bdi->state into wb.
* enum bdi_state is renamed to wb_state and the prefix of all enums is
changed from BDI_ to WB_.
* Explicit zeroing of bdi->state is removed without adding zeoring of
wb->state as the whole data structure is zeroed on init anyway.
* As there's still only one bdi_writeback per backing_dev_info, all
uses of bdi->state are mechanically replaced with bdi->wb.state
introducing no behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: drbd-dev@lists.linbit.com
Cc: Neil Brown <neilb@suse.de>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Add a tuning knob so we can adjust the dirtytime expiration timeout,
which is very useful for testing lazytime.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Jan Kara pointed out that if there is an inode which is constantly
getting dirtied with I_DIRTY_PAGES, an inode with an updated timestamp
will never be written since inode->dirtied_when is constantly getting
updated. We fix this by adding an extra field to the inode,
dirtied_time_when, so inodes with a stale dirtytime can get detected
and handled.
In addition, if we have a dirtytime inode caused by an atime update,
and there is no write activity on the file system, we need to have a
secondary system to make sure these inodes get written out. We do
this by setting up a second delayed work structure which wakes up the
CPU much more rarely compared to writeback_expire_centisecs.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
I've noticed significant locking contention in memory reclaimer around
sb_lock inside grab_super_passive(). Grab_super_passive() is called from
two places: in icache/dcache shrinkers (function super_cache_scan) and
from writeback (function __writeback_inodes_wb). Both are required for
progress in memory allocator.
Grab_super_passive() acquires sb_lock to increment sb->s_count and check
sb->s_instances. It seems sb->s_umount locked for read is enough here:
super-block deactivation always runs under sb->s_umount locked for write.
Protecting super-block itself isn't a problem: in super_cache_scan() sb
is protected by shrinker_rwsem: it cannot be freed if its slab shrinkers
are still active. Inside writeback super-block comes from inode from bdi
writeback list under wb->list_lock.
This patch removes locking sb_lock and checks s_instances under s_umount:
generic_shutdown_super() unlinks it under sb->s_umount locked for write.
New variant is called trylock_super() and since it only locks semaphore,
callers must call up_read(&sb->s_umount) instead of drop_super(sb) when
they're done.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull lazytime mount option support from Al Viro:
"Lazytime stuff from tytso"
* 'lazytime' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ext4: add optimization for the lazytime mount option
vfs: add find_inode_nowait() function
vfs: add support for a lazytime mount option
Add a new mount option which enables a new "lazytime" mode. This mode
causes atime, mtime, and ctime updates to only be made to the
in-memory version of the inode. The on-disk times will only get
updated when (a) if the inode needs to be updated for some non-time
related change, (b) if userspace calls fsync(), syncfs() or sync(), or
(c) just before an undeleted inode is evicted from memory.
This is OK according to POSIX because there are no guarantees after a
crash unless userspace explicitly requests via a fsync(2) call.
For workloads which feature a large number of random write to a
preallocated file, the lazytime mount option significantly reduces
writes to the inode table. The repeated 4k writes to a single block
will result in undesirable stress on flash devices and SMR disk
drives. Even on conventional HDD's, the repeated writes to the inode
table block will trigger Adjacent Track Interference (ATI) remediation
latencies, which very negatively impact long tail latencies --- which
is a very big deal for web serving tiers (for example).
Google-Bug-Id: 18297052
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Now that we got rid of the bdi abuse on character devices we can always use
sb->s_bdi to get at the backing_dev_info for a file, except for the block
device special case. Export inode_to_bdi and replace uses of
mapping->backing_dev_info with it to prepare for the removal of
mapping->backing_dev_info.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Directly grab the backing_dev_info from the request_queue instead of
detouring through the address_space.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
After invoking ->dirty_inode(), __mark_inode_dirty() does smp_mb() and
tests inode->i_state locklessly to see whether it already has all the
necessary I_DIRTY bits set. The comment above the barrier doesn't
contain any useful information - memory barriers can't ensure "changes
are seen by all cpus" by itself.
And it sure enough was broken. Please consider the following
scenario.
CPU 0 CPU 1
-------------------------------------------------------------------------------
enters __writeback_single_inode()
grabs inode->i_lock
tests PAGECACHE_TAG_DIRTY which is clear
enters __set_page_dirty()
grabs mapping->tree_lock
sets PAGECACHE_TAG_DIRTY
releases mapping->tree_lock
leaves __set_page_dirty()
enters __mark_inode_dirty()
smp_mb()
sees I_DIRTY_PAGES set
leaves __mark_inode_dirty()
clears I_DIRTY_PAGES
releases inode->i_lock
Now @inode has dirty pages w/ I_DIRTY_PAGES clear. This doesn't seem
to lead to an immediately critical problem because requeue_inode()
later checks PAGECACHE_TAG_DIRTY instead of I_DIRTY_PAGES when
deciding whether the inode needs to be requeued for IO and there are
enough unintentional memory barriers inbetween, so while the inode
ends up with inconsistent I_DIRTY_PAGES flag, it doesn't fall off the
IO list.
The lack of explicit barrier may also theoretically affect the other
I_DIRTY bits which deal with metadata dirtiness. There is no
guarantee that a strong enough barrier exists between
I_DIRTY_[DATA]SYNC clearing and write_inode() writing out the dirtied
inode. Filesystem inode writeout path likely has enough stuff which
can behave as full barrier but it's theoretically possible that the
writeout may not see all the updates from ->dirty_inode().
Fix it by adding an explicit smp_mb() after I_DIRTY clearing. Note
that I_DIRTY_PAGES needs a special treatment as it always needs to be
cleared to be interlocked with the lockless test on
__mark_inode_dirty() side. It's cleared unconditionally and
reinstated after smp_mb() if the mapping still has dirty pages.
Also add comments explaining how and why the barriers are paired.
Lightly tested.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
The current "wait_on_bit" interface requires an 'action'
function to be provided which does the actual waiting.
There are over 20 such functions, many of them identical.
Most cases can be satisfied by one of just two functions, one
which uses io_schedule() and one which just uses schedule().
So:
Rename wait_on_bit and wait_on_bit_lock to
wait_on_bit_action and wait_on_bit_lock_action
to make it explicit that they need an action function.
Introduce new wait_on_bit{,_lock} and wait_on_bit{,_lock}_io
which are *not* given an action function but implicitly use
a standard one.
The decision to error-out if a signal is pending is now made
based on the 'mode' argument rather than being encoded in the action
function.
All instances of the old wait_on_bit and wait_on_bit_lock which
can use the new version have been changed accordingly and their
action functions have been discarded.
wait_on_bit{_lock} does not return any specific error code in the
event of a signal so the caller must check for non-zero and
interpolate their own error code as appropriate.
The wait_on_bit() call in __fscache_wait_on_invalidate() was
ambiguous as it specified TASK_UNINTERRUPTIBLE but used
fscache_wait_bit_interruptible as an action function.
David Howells confirms this should be uniformly
"uninterruptible"
The main remaining user of wait_on_bit{,_lock}_action is NFS
which needs to use a freezer-aware schedule() call.
A comment in fs/gfs2/glock.c notes that having multiple 'action'
functions is useful as they display differently in the 'wchan'
field of 'ps'. (and /proc/$PID/wchan).
As the new bit_wait{,_io} functions are tagged "__sched", they
will not show up at all, but something higher in the stack. So
the distinction will still be visible, only with different
function names (gds2_glock_wait versus gfs2_glock_dq_wait in the
gfs2/glock.c case).
Since first version of this patch (against 3.15) two new action
functions appeared, on in NFS and one in CIFS. CIFS also now
uses an action function that makes the same freezer aware
schedule call as NFS.
Signed-off-by: NeilBrown <neilb@suse.de>
Acked-by: David Howells <dhowells@redhat.com> (fscache, keys)
Acked-by: Steven Whitehouse <swhiteho@redhat.com> (gfs2)
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steve French <sfrench@samba.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20140707051603.28027.72349.stgit@notabene.brown
Signed-off-by: Ingo Molnar <mingo@kernel.org>
but instead the widening contributor base. It is good to see that
interest is increasing in GFS2, and I'd like to thank all the
contributors to this patch set.
In addition to the usual set of bug fixes and clean ups, there are
patches to improve inode creation performance when xattrs are
required and some improvements to the transaction code which is
intended to help improve scalability after further changes in due
course.
Journal extent mapping is also updated to make it more efficient
and again, this is a foundation for future work in this area.
The maximum number of ACLs has been increased to 300 (for a 4k
block size) which means that even with a few additional xattrs
from selinux, everything should fit within a single fs block.
There is also a patch to bring GFS2's own copy of the writepages
code up to the same level as the core VFS. Eventually we may be
able to merge some of this code, since it is fairly similar.
The other major change this time, is bringing consistency to
the printing of messages via fs_<level>, pr_<level> macros.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)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=IWmZ
-----END PGP SIGNATURE-----
Merge tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw
Pull GFS2 updates from Steven Whitehouse:
"One of the main highlights this time, is not the patches themselves
but instead the widening contributor base. It is good to see that
interest is increasing in GFS2, and I'd like to thank all the
contributors to this patch set.
In addition to the usual set of bug fixes and clean ups, there are
patches to improve inode creation performance when xattrs are required
and some improvements to the transaction code which is intended to
help improve scalability after further changes in due course.
Journal extent mapping is also updated to make it more efficient and
again, this is a foundation for future work in this area.
The maximum number of ACLs has been increased to 300 (for a 4k block
size) which means that even with a few additional xattrs from selinux,
everything should fit within a single fs block.
There is also a patch to bring GFS2's own copy of the writepages code
up to the same level as the core VFS. Eventually we may be able to
merge some of this code, since it is fairly similar.
The other major change this time, is bringing consistency to the
printing of messages via fs_<level>, pr_<level> macros"
* tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw: (29 commits)
GFS2: Fix address space from page function
GFS2: Fix uninitialized VFS inode in gfs2_create_inode
GFS2: Fix return value in slot_get()
GFS2: inline function gfs2_set_mode
GFS2: Remove extraneous function gfs2_security_init
GFS2: Increase the max number of ACLs
GFS2: Re-add a call to log_flush_wait when flushing the journal
GFS2: Ensure workqueue is scheduled after noexp request
GFS2: check NULL return value in gfs2_ok_to_move
GFS2: Convert gfs2_lm_withdraw to use fs_err
GFS2: Use fs_<level> more often
GFS2: Use pr_<level> more consistently
GFS2: Move recovery variables to journal structure in memory
GFS2: global conversion to pr_foo()
GFS2: return -E2BIG if hit the maximum limits of ACLs
GFS2: Clean up journal extent mapping
GFS2: replace kmalloc - __vmalloc / memset 0
GFS2: Remove extra "if" in gfs2_log_flush()
fs: NULL dereference in posix_acl_to_xattr()
GFS2: Move log buffer accounting to transaction
...
After commit 839a8e8660 ("writeback: replace custom worker pool
implementation with unbound workqueue") when device is removed while we
are writing to it we crash in bdi_writeback_workfn() ->
set_worker_desc() because bdi->dev is NULL.
This can happen because even though bdi_unregister() cancels all pending
flushing work, nothing really prevents new ones from being queued from
balance_dirty_pages() or other places.
Fix the problem by clearing BDI_registered bit in bdi_unregister() and
checking it before scheduling of any flushing work.
Fixes: 839a8e8660
Reviewed-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Derek Basehore <dbasehore@chromium.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
bdi_wakeup_thread_delayed() used the mod_delayed_work() function to
schedule work to writeback dirty inodes. The problem with this is that
it can delay work that is scheduled for immediate execution, such as the
work from sync_inodes_sb(). This can happen since mod_delayed_work()
can now steal work from a work_queue. This fixes the problem by using
queue_delayed_work() instead. This is a regression caused by commit
839a8e8660 ("writeback: replace custom worker pool implementation with
unbound workqueue").
The reason that this causes a problem is that laptop-mode will change
the delay, dirty_writeback_centisecs, to 60000 (10 minutes) by default.
In the case that bdi_wakeup_thread_delayed() races with
sync_inodes_sb(), sync will be stopped for 10 minutes and trigger a hung
task. Even if dirty_writeback_centisecs is not long enough to cause a
hung task, we still don't want to delay sync for that long.
We fix the problem by using queue_delayed_work() when we want to
schedule writeback sometime in future. This function doesn't change the
timer if it is already armed.
For the same reason, we also change bdi_writeback_workfn() to
immediately queue the work again in the case that the work_list is not
empty. The same problem can happen if the sync work is run on the
rescue worker.
[jack@suse.cz: update changelog, add comment, use bdi_wakeup_thread_delayed()]
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Alexander Viro <viro@zento.linux.org.uk>
Reviewed-by: Tejun Heo <tj@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: Derek Basehore <dbasehore@chromium.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Benson Leung <bleung@chromium.org>
Cc: Sonny Rao <sonnyrao@chromium.org>
Cc: Luigi Semenzato <semenzato@chromium.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Dave Chinner <david@fromorbit.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit c4a391b53a. Dave
Chinner <david@fromorbit.com> has reported the commit may cause some
inodes to be left out from sync(2). This is because we can call
redirty_tail() for some inode (which sets i_dirtied_when to current time)
after sync(2) has started or similarly requeue_inode() can set
i_dirtied_when to current time if writeback had to skip some pages. The
real problem is in the functions clobbering i_dirtied_when but fixing
that isn't trivial so revert is a safer choice for now.
CC: stable@vger.kernel.org # >= 3.13
Signed-off-by: Jan Kara <jack@suse.cz>
GFS2 has carried what is more or less a copy of the
write_cache_pages() for some time. It seems that this
copy has slipped behind the core code over time. This
patch brings it back uptodate, and in addition adds the
tracepoint which would otherwise be missing.
We could go further, and eliminate some or all of the
code duplication here. The issue is that if we do that,
then the function we need to split out from the existing
write_cache_pages(), which will look a lot like
gfs2_jdata_write_pagevec(), would land up putting quite a
lot of extra variables on the stack. I know that has been
a problem in the past in the writeback code path, which
is why I've hesitated to do it here.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Commit 4f8ad655db "writeback: Refactor writeback_single_inode()" added
a condition to skip clean inode. However this is wrong in WB_SYNC_ALL
mode because there we also want to wait for outstanding writeback on
possibly clean inode. This was causing occasional data corruption issues
on NFS because it uses sync_inode() to make sure all outstanding writes
are flushed to the server before truncating the inode and with
sync_inode() returning prematurely file was sometimes extended back
by an outstanding write after it was truncated.
So modify the test to also check for pages under writeback in
WB_SYNC_ALL mode.
CC: stable@vger.kernel.org # >= 3.5
Fixes: 4f8ad655db
Reported-and-tested-by: Dan Duval <dan.duval@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Merge first patch-bomb from Andrew Morton:
"Quite a lot of other stuff is banked up awaiting further
next->mainline merging, but this batch contains:
- Lots of random misc patches
- OCFS2
- Most of MM
- backlight updates
- lib/ updates
- printk updates
- checkpatch updates
- epoll tweaking
- rtc updates
- hfs
- hfsplus
- documentation
- procfs
- update gcov to gcc-4.7 format
- IPC"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (269 commits)
ipc, msg: fix message length check for negative values
ipc/util.c: remove unnecessary work pending test
devpts: plug the memory leak in kill_sb
./Makefile: export initial ramdisk compression config option
init/Kconfig: add option to disable kernel compression
drivers: w1: make w1_slave::flags long to avoid memory corruption
drivers/w1/masters/ds1wm.cuse dev_get_platdata()
drivers/memstick/core/ms_block.c: fix unreachable state in h_msb_read_page()
drivers/memstick/core/mspro_block.c: fix attributes array allocation
drivers/pps/clients/pps-gpio.c: remove redundant of_match_ptr
kernel/panic.c: reduce 1 byte usage for print tainted buffer
gcov: reuse kbasename helper
kernel/gcov/fs.c: use pr_warn()
kernel/module.c: use pr_foo()
gcov: compile specific gcov implementation based on gcc version
gcov: add support for gcc 4.7 gcov format
gcov: move gcov structs definitions to a gcc version specific file
kernel/taskstats.c: return -ENOMEM when alloc memory fails in add_del_listener()
kernel/taskstats.c: add nla_nest_cancel() for failure processing between nla_nest_start() and nla_nest_end()
kernel/sysctl_binary.c: use scnprintf() instead of snprintf()
...
When there are processes heavily creating small files while sync(2) is
running, it can easily happen that quite some new files are created
between WB_SYNC_NONE and WB_SYNC_ALL pass of sync(2). That can happen
especially if there are several busy filesystems (remember that sync
traverses filesystems sequentially and waits in WB_SYNC_ALL phase on one
fs before starting it on another fs). Because WB_SYNC_ALL pass is slow
(e.g. causes a transaction commit and cache flush for each inode in
ext3), resulting sync(2) times are rather large.
The following script reproduces the problem:
function run_writers
{
for (( i = 0; i < 10; i++ )); do
mkdir $1/dir$i
for (( j = 0; j < 40000; j++ )); do
dd if=/dev/zero of=$1/dir$i/$j bs=4k count=4 &>/dev/null
done &
done
}
for dir in "$@"; do
run_writers $dir
done
sleep 40
time sync
Fix the problem by disregarding inodes dirtied after sync(2) was called
in the WB_SYNC_ALL pass. To allow for this, sync_inodes_sb() now takes
a time stamp when sync has started which is used for setting up work for
flusher threads.
To give some numbers, when above script is run on two ext4 filesystems
on simple SATA drive, the average sync time from 10 runs is 267.549
seconds with standard deviation 104.799426. With the patched kernel,
the average sync time from 10 runs is 2.995 seconds with standard
deviation 0.096.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Fengguang Wu <fengguang.wu@intel.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
aka br_write_{lock,unlock} of vfsmount_lock. Inlines in fs/mount.h,
vfsmount_lock extern moved over there as well.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=FB22
-----END PGP SIGNATURE-----
Merge tag 'writeback-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux
Pull writeback fix from Wu Fengguang:
"A trivial writeback fix"
* tag 'writeback-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux:
writeback: Do not sort b_io list only because of block device inode
There is a race between mark inode dirty and writeback thread, see the
following scenario. In this case, writeback thread will not run though
there is dirty_io.
__mark_inode_dirty() bdi_writeback_workfn()
... ...
spin_lock(&inode->i_lock);
...
if (bdi_cap_writeback_dirty(bdi)) {
<<< assume wb has dirty_io, so wakeup_bdi is false.
<<< the following inode_dirty also have wakeup_bdi false.
if (!wb_has_dirty_io(&bdi->wb))
wakeup_bdi = true;
}
spin_unlock(&inode->i_lock);
<<< assume last dirty_io is removed here.
pages_written = wb_do_writeback(wb);
...
<<< work_list empty and wb has no dirty_io,
<<< delayed_work will not be queued.
if (!list_empty(&bdi->work_list) ||
(wb_has_dirty_io(wb) && dirty_writeback_interval))
queue_delayed_work(bdi_wq, &wb->dwork,
msecs_to_jiffies(dirty_writeback_interval * 10));
spin_lock(&bdi->wb.list_lock);
inode->dirtied_when = jiffies;
<<< new dirty_io is added.
list_move(&inode->i_wb_list, &bdi->wb.b_dirty);
spin_unlock(&bdi->wb.list_lock);
<<< though there is dirty_io, but wakeup_bdi is false,
<<< so writeback thread will not be waked up and
<<< the new dirty_io will not be flushed.
if (wakeup_bdi)
bdi_wakeup_thread_delayed(bdi);
Writeback will run until there is a new flush work queued. This may cause
a lot of dirty pages stay in memory for a long time.
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It's not used globally and could be static.
Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In case when system contains no dirty pages, wakeup_flusher_threads() will
submit WB_SYNC_NONE writeback for 0 pages so wb_writeback() exits
immediately without doing anything, even though there are dirty inodes in
the system. Thus sync(1) will write all the dirty inodes from a
WB_SYNC_ALL writeback pass which is slow.
Fix the problem by using get_nr_dirty_pages() in wakeup_flusher_threads()
instead of calculating number of dirty pages manually. That function also
takes number of dirty inodes into account.
Signed-off-by: Jan Kara <jack@suse.cz>
Reported-by: Paul Taysom <taysom@chromium.org>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After commit 839a8e8660 ("writeback: replace custom worker pool
implementation with unbound workqueue"), bdi_writeback_workfn runs off
bdi_writeback->dwork, on each execution, it processes bdi->work_list and
reschedules if there are more things to do instead of flush any work
that race with us existing. It is unecessary to check force_wait in
wb_do_writeback since it is always 0 after the mentioned commit. This
patch remove the force_wait in wb_do_writeback.
Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It's not used globally and could be static.
Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It is very likely that block device inode will be part of BDI dirty list
as well. However it doesn't make sence to sort inodes on the b_io list
just because of this inode (as it contains buffers all over the device
anyway). So save some CPU cycles which is valuable since we hold relatively
contented wb->list_lock.
Signed-off-by: Jan Kara <jack@suse.cz>
When sync does it's WB_SYNC_ALL writeback, it issues data Io and
then immediately waits for IO completion. This is done in the
context of the flusher thread, and hence completely ties up the
flusher thread for the backing device until all the dirty inodes
have been synced. On filesystems that are dirtying inodes constantly
and quickly, this means the flusher thread can be tied up for
minutes per sync call and hence badly affect system level write IO
performance as the page cache cannot be cleaned quickly.
We already have a wait loop for IO completion for sync(2), so cut
this out of the flusher thread and delegate it to wait_sb_inodes().
Hence we can do rapid IO submission, and then wait for it all to
complete.
Effect of sync on fsmark before the patch:
FSUse% Count Size Files/sec App Overhead
.....
0 640000 4096 35154.6 1026984
0 720000 4096 36740.3 1023844
0 800000 4096 36184.6 916599
0 880000 4096 1282.7 1054367
0 960000 4096 3951.3 918773
0 1040000 4096 40646.2 996448
0 1120000 4096 43610.1 895647
0 1200000 4096 40333.1 921048
And a single sync pass took:
real 0m52.407s
user 0m0.000s
sys 0m0.090s
After the patch, there is no impact on fsmark results, and each
individual sync(2) operation run concurrently with the same fsmark
workload takes roughly 7s:
real 0m6.930s
user 0m0.000s
sys 0m0.039s
IOWs, sync is 7-8x faster on a busy filesystem and does not have an
adverse impact on ongoing async data write operations.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull block core updates from Jens Axboe:
- Major bit is Kents prep work for immutable bio vecs.
- Stable candidate fix for a scheduling-while-atomic in the queue
bypass operation.
- Fix for the hang on exceeded rq->datalen 32-bit unsigned when merging
discard bios.
- Tejuns changes to convert the writeback thread pool to the generic
workqueue mechanism.
- Runtime PM framework, SCSI patches exists on top of these in James'
tree.
- A few random fixes.
* 'for-3.10/core' of git://git.kernel.dk/linux-block: (40 commits)
relay: move remove_buf_file inside relay_close_buf
partitions/efi.c: replace useless kzalloc's by kmalloc's
fs/block_dev.c: fix iov_shorten() criteria in blkdev_aio_read()
block: fix max discard sectors limit
blkcg: fix "scheduling while atomic" in blk_queue_bypass_start
Documentation: cfq-iosched: update documentation help for cfq tunables
writeback: expose the bdi_wq workqueue
writeback: replace custom worker pool implementation with unbound workqueue
writeback: remove unused bdi_pending_list
aoe: Fix unitialized var usage
bio-integrity: Add explicit field for owner of bip_buf
block: Add an explicit bio flag for bios that own their bvec
block: Add bio_alloc_pages()
block: Convert some code to bio_for_each_segment_all()
block: Add bio_for_each_segment_all()
bounce: Refactor __blk_queue_bounce to not use bi_io_vec
raid1: use bio_copy_data()
pktcdvd: Use bio_reset() in disabled code to kill bi_idx usage
pktcdvd: use bio_copy_data()
block: Add bio_copy_data()
...
Writeback has been recently converted to use workqueue instead of its
private thread pool implementation. One negative side effect of this
conversion is that there's no easy to tell which backing device a
writeback work item was working on at the time of task dump, be it
sysrq-t, BUG, WARN or whatever, which, according to our writeback
brethren, is important in tracking down issues with a lot of mounted
file systems on a lot of different devices.
This patch restores that information using the new worker description
facility. bdi_writeback_workfn() calls set_work_desc() to identify
which bdi it's working on. The description is printed out together with
the worqueue name and worker function as in the following example dump.
WARNING: at fs/fs-writeback.c:1015 bdi_writeback_workfn+0x2b4/0x3c0()
Modules linked in:
Pid: 28, comm: kworker/u18:0 Not tainted 3.9.0-rc1-work+ #24 empty empty/S3992
Workqueue: writeback bdi_writeback_workfn (flush-8:16)
ffffffff820a3a98 ffff88015b927cb8 ffffffff81c61855 ffff88015b927cf8
ffffffff8108f500 0000000000000000 ffff88007a171948 ffff88007a1716b0
ffff88015b49df00 ffff88015b8d3940 0000000000000000 ffff88015b927d08
Call Trace:
[<ffffffff81c61855>] dump_stack+0x19/0x1b
[<ffffffff8108f500>] warn_slowpath_common+0x70/0xa0
[<ffffffff8108f54a>] warn_slowpath_null+0x1a/0x20
[<ffffffff81200144>] bdi_writeback_workfn+0x2b4/0x3c0
[<ffffffff810b4c87>] process_one_work+0x1d7/0x660
[<ffffffff810b5c72>] worker_thread+0x122/0x380
[<ffffffff810bdfea>] kthread+0xea/0xf0
[<ffffffff81c6cedc>] ret_from_fork+0x7c/0xb0
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Writeback implements its own worker pool - each bdi can be associated
with a worker thread which is created and destroyed dynamically. The
worker thread for the default bdi is always present and serves as the
"forker" thread which forks off worker threads for other bdis.
there's no reason for writeback to implement its own worker pool when
using unbound workqueue instead is much simpler and more efficient.
This patch replaces custom worker pool implementation in writeback
with an unbound workqueue.
The conversion isn't too complicated but the followings are worth
mentioning.
* bdi_writeback->last_active, task and wakeup_timer are removed.
delayed_work ->dwork is added instead. Explicit timer handling is
no longer necessary. Everything works by either queueing / modding
/ flushing / canceling the delayed_work item.
* bdi_writeback_thread() becomes bdi_writeback_workfn() which runs off
bdi_writeback->dwork. On each execution, it processes
bdi->work_list and reschedules itself if there are more things to
do.
The function also handles low-mem condition, which used to be
handled by the forker thread. If the function is running off a
rescuer thread, it only writes out limited number of pages so that
the rescuer can serve other bdis too. This preserves the flusher
creation failure behavior of the forker thread.
* INIT_LIST_HEAD(&bdi->bdi_list) is used to tell
bdi_writeback_workfn() about on-going bdi unregistration so that it
always drains work_list even if it's running off the rescuer. Note
that the original code was broken in this regard. Under memory
pressure, a bdi could finish unregistration with non-empty
work_list.
* The default bdi is no longer special. It now is treated the same as
any other bdi and bdi_cap_flush_forker() is removed.
* BDI_pending is no longer used. Removed.
* Some tracepoints become non-applicable. The following TPs are
removed - writeback_nothread, writeback_wake_thread,
writeback_wake_forker_thread, writeback_thread_start,
writeback_thread_stop.
Everything, including devices coming and going away and rescuer
operation under simulated memory pressure, seems to work fine in my
test setup.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Add tracepoints for page dirtying, writeback_single_inode start, inode
dirtying and writeback. For the latter two inode events, a pair of
events are defined to denote start and end of the operations (the
starting one has _start suffix and the one w/o suffix happens after
the operation is complete). These inode ops are FS specific and can
be non-trivial and having enclosing tracepoints is useful for external
tracers.
This is part of tracepoint additions to improve visiblity into
dirtying / writeback operations for io tracer and userland.
v2: writeback_dirty_inode[_start] TPs may be called for files on
pseudo FSes w/ unregistered bdi. Check whether bdi->dev is %NULL
before dereferencing.
v3: buffer dirtying moved to a block TP.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
writeback_inodes_sb(_nr)_if_idle() is re-implemented by replacing down_read()
with down_read_trylock() because
- If ->s_umount is write locked, then the sb is not idle. That is
writeback_inodes_sb(_nr)_if_idle() needn't wait for the lock.
- writeback_inodes_sb(_nr)_if_idle() grabs s_umount lock when it want to start
writeback, it may bring us deadlock problem when doing umount. In order to
fix the problem, ext4 and btrfs implemented their own writeback functions
instead of writeback_inodes_sb(_nr)_if_idle(), but it introduced the redundant
code, it is better to implement a new writeback_inodes_sb(_nr)_if_idle().
The name of these two functions is cumbersome, so rename them to
try_to_writeback_inodes_sb(_nr).
This idea came from Christoph Hellwig.
Some code is from the patch of Kamal Mostafa.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Yan Hong <clouds.yan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 169ebd9013 ("writeback: Avoid iput() from flusher thread")
removed iget-iput pair from inode writeback. As a side effect, inodes
that are dirty during iput_final() call won't be ever added to inode LRU
(iput_final() doesn't add dirty inodes to LRU and later when the inode
is cleaned there's noone to add the inode there). Thus inodes are
effectively unreclaimable until someone looks them up again.
The practical effect of this bug is limited by the fact that inodes are
pinned by a dentry for long enough that the inode gets cleaned. But
still the bug can have nasty consequences leading up to OOM conditions
under certain circumstances. Following can easily reproduce the
problem:
for (( i = 0; i < 1000; i++ )); do
mkdir $i
for (( j = 0; j < 1000; j++ )); do
touch $i/$j
echo 2 > /proc/sys/vm/drop_caches
done
done
then one needs to run 'sync; ls -lR' to make inodes reclaimable again.
We fix the issue by inserting unused clean inodes into the LRU after
writeback finishes in inode_sync_complete().
Signed-off-by: Jan Kara <jack@suse.cz>
Reported-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: <stable@vger.kernel.org> [3.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull writeback fixes from Fengguang Wu:
"Three trivial writeback fixes"
* 'writeback-for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux:
CPU hotplug, writeback: Don't call writeback_set_ratelimit() too often during hotplug
writeback: correct comment for move_expired_inodes()
backing-dev: use kstrto* in preference to simple_strtoul
The parameter 'wb' is never used in this function.
Signed-off-by: Yan Hong <clouds.yan@gmail.com>
Acked-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
using the meta_bg feature. This allows us to resize file systems
which are greater than 16TB. In addition, the speed of online
resizing has been improved in general.
We also fix a number of races, some of which could lead to deadlocks,
in ext4's Asynchronous I/O and online defrag support, thanks to good
work by Dmitry Monakhov.
There are also a large number of more minor bug fixes and cleanups
from a number of other ext4 contributors, quite of few of which have
submitted fixes for the first time.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=iYeV
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"The big new feature added this time is supporting online resizing
using the meta_bg feature. This allows us to resize file systems
which are greater than 16TB. In addition, the speed of online
resizing has been improved in general.
We also fix a number of races, some of which could lead to deadlocks,
in ext4's Asynchronous I/O and online defrag support, thanks to good
work by Dmitry Monakhov.
There are also a large number of more minor bug fixes and cleanups
from a number of other ext4 contributors, quite of few of which have
submitted fixes for the first time."
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (69 commits)
ext4: fix ext4_flush_completed_IO wait semantics
ext4: fix mtime update in nodelalloc mode
ext4: fix ext_remove_space for punch_hole case
ext4: punch_hole should wait for DIO writers
ext4: serialize truncate with owerwrite DIO workers
ext4: endless truncate due to nonlocked dio readers
ext4: serialize unlocked dio reads with truncate
ext4: serialize dio nonlocked reads with defrag workers
ext4: completed_io locking cleanup
ext4: fix unwritten counter leakage
ext4: give i_aiodio_unwritten a more appropriate name
ext4: ext4_inode_info diet
ext4: convert to use leXX_add_cpu()
ext4: ext4_bread usage audit
fs: reserve fallocate flag codepoint
ext4: remove redundant offset check in mext_check_arguments()
ext4: don't clear orphan list on ro mount with errors
jbd2: fix assertion failure in commit code due to lacking transaction credits
ext4: release donor reference when EXT4_IOC_MOVE_EXT ioctl fails
ext4: enable FITRIM ioctl on bigalloc file system
...
Pull the trivial tree from Jiri Kosina:
"Tiny usual fixes all over the place"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits)
doc: fix old config name of kprobetrace
fs/fs-writeback.c: cleanup riteback_sb_inodes kerneldoc
btrfs: fix the commment for the action flags in delayed-ref.h
btrfs: fix trivial typo for the comment of BTRFS_FREE_INO_OBJECTID
vfs: fix kerneldoc for generic_fh_to_parent()
treewide: fix comment/printk/variable typos
ipr: fix small coding style issues
doc: fix broken utf8 encoding
nfs: comment fix
platform/x86: fix asus_laptop.wled_type module parameter
mfd: printk/comment fixes
doc: getdelays.c: remember to close() socket on error in create_nl_socket()
doc: aliasing-test: close fd on write error
mmc: fix comment typos
dma: fix comments
spi: fix comment/printk typos in spi
Coccinelle: fix typo in memdup_user.cocci
tmiofb: missing NULL pointer checks
tools: perf: Fix typo in tools/perf
tools/testing: fix comment / output typos
...
In ext4_nonda_switch(), if the file system is getting full we used to
call writeback_inodes_sb_if_idle(). The problem is that we can be
holding i_mutex already, and this causes a potential deadlock when
writeback_inodes_sb_if_idle() when it tries to take s_umount. (See
lockdep output below).
As it turns out we don't need need to hold s_umount; the fact that we
are in the middle of the write(2) system call will keep the superblock
pinned. Unfortunately writeback_inodes_sb() checks to make sure
s_umount is taken, and the VFS uses a different mechanism for making
sure the file system doesn't get unmounted out from under us. The
simplest way of dealing with this is to just simply grab s_umount
using a trylock, and skip kicking the writeback flusher thread in the
very unlikely case that we can't take a read lock on s_umount without
blocking.
Also, we now check the cirteria for kicking the writeback thread
before we decide to whether to fall back to non-delayed writeback, so
if there are any outstanding delayed allocation writes, we try to get
them resolved as soon as possible.
[ INFO: possible circular locking dependency detected ]
3.6.0-rc1-00042-gce894ca #367 Not tainted
-------------------------------------------------------
dd/8298 is trying to acquire lock:
(&type->s_umount_key#18){++++..}, at: [<c02277d4>] writeback_inodes_sb_if_idle+0x28/0x46
but task is already holding lock:
(&sb->s_type->i_mutex_key#8){+.+...}, at: [<c01ddcce>] generic_file_aio_write+0x5f/0xd3
which lock already depends on the new lock.
2 locks held by dd/8298:
#0: (sb_writers#2){.+.+.+}, at: [<c01ddcc5>] generic_file_aio_write+0x56/0xd3
#1: (&sb->s_type->i_mutex_key#8){+.+...}, at: [<c01ddcce>] generic_file_aio_write+0x5f/0xd3
stack backtrace:
Pid: 8298, comm: dd Not tainted 3.6.0-rc1-00042-gce894ca #367
Call Trace:
[<c015b79c>] ? console_unlock+0x345/0x372
[<c06d62a1>] print_circular_bug+0x190/0x19d
[<c019906c>] __lock_acquire+0x86d/0xb6c
[<c01999db>] ? mark_held_locks+0x5c/0x7b
[<c0199724>] lock_acquire+0x66/0xb9
[<c02277d4>] ? writeback_inodes_sb_if_idle+0x28/0x46
[<c06db935>] down_read+0x28/0x58
[<c02277d4>] ? writeback_inodes_sb_if_idle+0x28/0x46
[<c02277d4>] writeback_inodes_sb_if_idle+0x28/0x46
[<c026f3b2>] ext4_nonda_switch+0xe1/0xf4
[<c0271ece>] ext4_da_write_begin+0x27/0x193
[<c01dcdb0>] generic_file_buffered_write+0xc8/0x1bb
[<c01ddc47>] __generic_file_aio_write+0x1dd/0x205
[<c01ddce7>] generic_file_aio_write+0x78/0xd3
[<c026d336>] ext4_file_write+0x480/0x4a6
[<c0198c1d>] ? __lock_acquire+0x41e/0xb6c
[<c0180944>] ? sched_clock_cpu+0x11a/0x13e
[<c01967e9>] ? trace_hardirqs_off+0xb/0xd
[<c018099f>] ? local_clock+0x37/0x4e
[<c0209f2c>] do_sync_write+0x67/0x9d
[<c0209ec5>] ? wait_on_retry_sync_kiocb+0x44/0x44
[<c020a7b9>] vfs_write+0x7b/0xe6
[<c020a9a6>] sys_write+0x3b/0x64
[<c06dd4bd>] syscall_call+0x7/0xb
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
The function scans @delaying_queue and stops at the first inode
whose dirtied_when is after *work->older_than_this. So the expired
ones being moved are those before *work->older_than_this. Correct
the comment here.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
Since per-BDI flusher threads were introduced in 2.6, the pdflush
mechanism is not used any more. But the old interface exported through
/proc/sys/vm/nr_pdflush_threads still exists and is obviously useless.
For back-compatibility, printk warning information and return 2 to notify
the users that the interface is removed.
Signed-off-by: Wanpeng Li <liwp@linux.vnet.ibm.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
which can adapt equally well to fast/slow devices.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=gZrM
-----END PGP SIGNATURE-----
Merge tag 'writeback-proportions' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux
Pull writeback updates from Wu Fengguang:
"Use time based periods to age the writeback proportions, which can
adapt equally well to fast/slow devices."
Fix up trivial conflict in comment in fs/sync.c
* tag 'writeback-proportions' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux:
writeback: Fix some comment errors
block: Convert BDI proportion calculations to flexible proportions
lib: Fix possible deadlock in flexible proportion code
lib: Proportions with flexible period
In principle, a filesystem may want to have ->sync_fs() called during sync(1)
although it does not have a bdi (i.e. s_bdi is set to noop_backing_dev_info).
Only writeback code really needs bdi set to something reasonable. So move the
checks where they are more logical.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Fix bug introduced by 169ebd90. We have to have wb_list_lock locked when
restarting writeback loop after having waited for inode writeback.
Bug description by Ted Tso:
I can reproduce this fairly easily by using ext4 w/o a journal, running
under KVM with 1024megs memory, with fsstress (xfstests #13):
[ 45.153294] =====================================
[ 45.154784] [ BUG: bad unlock balance detected! ]
[ 45.155591] 3.5.0-rc1-00002-gb22b1f1 #124 Not tainted
[ 45.155591] -------------------------------------
[ 45.155591] flush-254:16/2499 is trying to release lock (&(&wb->list_lock)->rlock) at:
[ 45.155591] [<c022c3da>] writeback_sb_inodes+0x160/0x327
[ 45.155591] but there are no more locks to release!
Reported-by: Theodore Ts'o <tytso@mit.edu>
Tested-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Doing iput() from flusher thread (writeback_sb_inodes()) can create problems
because iput() can do a lot of work - for example truncate the inode if it's
the last iput on unlinked file. Some filesystems depend on flusher thread
progressing (e.g. because they need to flush delay allocated blocks to reduce
allocation uncertainty) and so flusher thread doing truncate creates
interesting dependencies and possibilities for deadlocks.
We get rid of iput() in flusher thread by using the fact that I_SYNC inode
flag effectively pins the inode in memory. So if we take care to either hold
i_lock or have I_SYNC set, we can get away without taking inode reference
in writeback_sb_inodes().
As a side effect of these changes, we also fix possible use-after-free in
wb_writeback() because inode_wait_for_writeback() call could try to reacquire
i_lock on the inode that was already free.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
The code in writeback_single_inode() is relatively complex. The list requeing
logic makes sense only for flusher thread but not really for sync_inode() or
write_inode_now() callers. Also when we want to get rid of inode references
held by flusher thread, we will need a special I_SYNC handling there.
So separate part of writeback_single_inode() which does the real writeback work
into __writeback_single_inode() and make writeback_single_inode() do only stuff
necessary for callers writing only one inode, moving the special list handling
into writeback_sb_inodes(). As a sideeffect this fixes a possible race where we
could skip some inode during sync(2) because other writer refiled it from b_io
to b_dirty list. Also I_SYNC handling is moved into the callers of
__writeback_single_inode() to make locking easier.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
writeback_single_inode() doesn't need wb->list_lock for anything on entry now.
So remove the requirement. This makes locking of writeback_single_inode()
temporarily awkward (entering with i_lock, returning with i_lock and
wb->list_lock) but it will be sanitized in the next patch.
Also inode_wait_for_writeback() doesn't need wb->list_lock for anything. It was
just taking it to make usage convenient for callers but with
writeback_single_inode() changing it's not very convenient anymore. So remove
the lock from that function.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Move inode requeueing after inode has been written out into a separate
function.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Instead of clearing I_DIRTY_PAGES and resetting it when we didn't succeed in
writing them all, just clear the bit only when we succeeded writing all the
pages. We also move the clearing of the bit close to other i_state handling to
separate it from writeback list handling. This is desirable because list
handling will differ for flusher thread and other writeback_single_inode()
callers in future. No filesystem plays any tricks with I_DIRTY_PAGES (like
checking it in ->writepages or ->write_inode implementation) so this movement
is safe.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
When writeback_single_inode() is called on inode which has I_SYNC already
set while doing WB_SYNC_NONE, inode is moved to b_more_io list. However
this makes sense only if the caller is flusher thread. For other callers of
writeback_single_inode() it doesn't really make sense and may be even wrong
- flusher thread may be doing WB_SYNC_ALL writeback in parallel.
So we move requeueing from writeback_single_inode() to writeback_sb_inodes().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Move clearing of I_SYNC into inode_sync_complete(). It is more logical to have
clearing of I_SYNC bit and waking of waiters in one place. Also later we will
have two places needing to clear I_SYNC and wake up waiters so this allows them
to use the common helper. Moving of I_SYNC clearing to a later stage of
writeback_single_inode() is safe since we hold i_lock all the time.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
"[PATCH 0/3] RFC - module.h usage cleanups in fs/ and lib/"
https://lkml.org/lkml/2012/2/29/589
--
Fix up files in fs/ and lib/ dirs to only use module.h if they really
need it.
These are trivial in scope vs. the work done previously. We now have
things where any few remaining cleanups can be farmed out to arch or
subsystem maintainers, and I have done so when possible. What is
remaining here represents the bits that don't clearly lie within a
single arch/subsystem boundary, like the fs dir and the lib dir.
Some duplicate includes arising from overlapping fixes from
independent subsystem maintainer submissions are also quashed.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=Z4w0
-----END PGP SIGNATURE-----
Merge tag 'module-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux
Pull cleanup of fs/ and lib/ users of module.h from Paul Gortmaker:
"Fix up files in fs/ and lib/ dirs to only use module.h if they really
need it.
These are trivial in scope vs the work done previously. We now have
things where any few remaining cleanups can be farmed out to arch or
subsystem maintainers, and I have done so when possible. What is
remaining here represents the bits that don't clearly lie within a
single arch/subsystem boundary, like the fs dir and the lib dir.
Some duplicate includes arising from overlapping fixes from
independent subsystem maintainer submissions are also quashed."
Fix up trivial conflicts due to clashes with other include file cleanups
(including some due to the previous bug.h cleanup pull).
* tag 'module-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:
lib: reduce the use of module.h wherever possible
fs: reduce the use of module.h wherever possible
includecheck: delete any duplicate instances of module.h
The comment is hopelessly outdated and misplaced. We no longer have 'bdi'
part of writeback work, the comment about blockdev super is outdated,
comment about throttling as well. Information about list handling is in
more detail at queue_io(). So just move the bit about older_than_this to
close to move_expired_inodes() and remove the rest.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
inode_sync_wait() in write_inode_now() is just bogus. That function waits for
I_SYNC bit to be cleared but writeback_single_inode() clears the bit on return
so the wait is effectivelly a nop unless someone else submits the inode for
writeback again. All the waiting write_inode_now() needs is achieved by using
WB_SYNC_ALL writeback mode.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Pull trivial tree from Jiri Kosina:
"It's indeed trivial -- mostly documentation updates and a bunch of
typo fixes from Masanari.
There are also several linux/version.h include removals from Jesper."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (101 commits)
kcore: fix spelling in read_kcore() comment
constify struct pci_dev * in obvious cases
Revert "char: Fix typo in viotape.c"
init: fix wording error in mm_init comment
usb: gadget: Kconfig: fix typo for 'different'
Revert "power, max8998: Include linux/module.h just once in drivers/power/max8998_charger.c"
writeback: fix fn name in writeback_inodes_sb_nr_if_idle() comment header
writeback: fix typo in the writeback_control comment
Documentation: Fix multiple typo in Documentation
tpm_tis: fix tis_lock with respect to RCU
Revert "media: Fix typo in mixer_drv.c and hdmi_drv.c"
Doc: Update numastat.txt
qla4xxx: Add missing spaces to error messages
compiler.h: Fix typo
security: struct security_operations kerneldoc fix
Documentation: broken URL in libata.tmpl
Documentation: broken URL in filesystems.tmpl
mtd: simplify return logic in do_map_probe()
mm: fix comment typo of truncate_inode_pages_range
power: bq27x00: Fix typos in comment
...
Dave Chinner