Commit Graph

989 Commits

Author SHA1 Message Date
Linus Torvalds 30c44659f4 Merge branch 'strscpy' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile
Pull strscpy string copy function implementation from Chris Metcalf.

Chris sent this during the merge window, but I waffled back and forth on
the pull request, which is why it's going in only now.

The new "strscpy()" function is definitely easier to use and more secure
than either strncpy() or strlcpy(), both of which are horrible nasty
interfaces that have serious and irredeemable problems.

strncpy() has a useless return value, and doesn't NUL-terminate an
overlong result.  To make matters worse, it pads a short result with
zeroes, which is a performance disaster if you have big buffers.

strlcpy(), by contrast, is a mis-designed "fix" for strlcpy(), lacking
the insane NUL padding, but having a differently broken return value
which returns the original length of the source string.  Which means
that it will read characters past the count from the source buffer, and
you have to trust the source to be properly terminated.  It also makes
error handling fragile, since the test for overflow is unnecessarily
subtle.

strscpy() avoids both these problems, guaranteeing the NUL termination
(but not excessive padding) if the destination size wasn't zero, and
making the overflow condition very obvious by returning -E2BIG.  It also
doesn't read past the size of the source, and can thus be used for
untrusted source data too.

So why did I waffle about this for so long?

Every time we introduce a new-and-improved interface, people start doing
these interminable series of trivial conversion patches.

And every time that happens, somebody does some silly mistake, and the
conversion patch to the improved interface actually makes things worse.
Because the patch is mindnumbing and trivial, nobody has the attention
span to look at it carefully, and it's usually done over large swatches
of source code which means that not every conversion gets tested.

So I'm pulling the strscpy() support because it *is* a better interface.
But I will refuse to pull mindless conversion patches.  Use this in
places where it makes sense, but don't do trivial patches to fix things
that aren't actually known to be broken.

* 'strscpy' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  tile: use global strscpy() rather than private copy
  string: provide strscpy()
  Make asm/word-at-a-time.h available on all architectures
2015-10-04 16:31:13 +01:00
Rabin Vincent 254a0f4135 CRISv10: delete unused lib/dmacopy.c
This file is never built.

Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Jesper Nilsson <jespern@axis.com>
2015-09-05 00:56:51 +02:00
Rabin Vincent c2ffc68afc CRISv10: delete unused lib/old_checksum.c
This file is never built.

Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-09-05 00:56:51 +02:00
Rabin Vincent 7f0144e777 CRIS: fix switch_mm() lockdep splat
With lockdep support implemented on CRISv32, we get the following splat.
switch_mm() can be called both from the scheduler() (with interrupts
disabled) and from flush_old_exec (via activate_mm()), with interrupts
enabled.  Fix it by disabling interrupts in activate_mm(), similar to
powerpc and hexagon.

 t======================================================
 [ INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected ]
 3.19.0-08802-g20bc9f1-dirty #323 Not tainted
 ------------------------------------------------------
 init/1 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
  (mmu_context_lock){+.+...}, at: [<c0009290>] switch_mm+0x22/0xc6

 and this task is already holding:
  (&rq->lock){-.-.-.}, at: [<c01a0756>] __schedule+0x5e/0x648
 which would create a new lock dependency:
  (&rq->lock){-.-.-.} -> (mmu_context_lock){+.+...}

 but this new dependency connects a HARDIRQ-irq-safe lock:
  (&rq->lock){-.-.-.}
 ... which became HARDIRQ-irq-safe at:
   [<c002b03c>] scheduler_tick+0x28/0x5e
   [<c0007c6c>] timer_interrupt+0x4e/0x6a
   [<c0043ac4>] handle_irq_event_percpu+0x54/0x13c
   [<c004343c>] generic_handle_irq+0x2a/0x36

 to a HARDIRQ-irq-unsafe lock:
  (mmu_context_lock){+.+...}
 ... which became HARDIRQ-irq-unsafe at:
 ...  [<c0039e60>] __lock_acquire+0x8f8/0x1d9c
   [<c0009290>] switch_mm+0x22/0xc6
   [<c009c260>] flush_old_exec+0x500/0x5d4
   [<c00da4c6>] load_elf_phdrs+0x7a/0x84
   [<c00dbdb0>] load_elf_binary+0x21c/0x13b4
   [<c009cdb6>] do_execve+0x22/0x2c
   [<c001dcf2>] ____call_usermodehelper+0x0/0x154
   [<c000581e>] ret_from_kernel_thread+0xe/0x14

 other info that might help us debug this:

  Possible interrupt unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(mmu_context_lock);
                                local_irq_disable();
                                lock(&rq->lock);
                                lock(mmu_context_lock);
   <Interrupt>
     lock(&rq->lock);

  *** DEADLOCK ***

 1 lock held by init/1:
  #0:  (&rq->lock){-.-.-.}, at: [<c01a0756>] __schedule+0x5e/0x648

 Call Trace:
 [<c019fe9e>] printk+0x0/0x4e
 [<c00368f8>] print_shortest_lock_dependencies+0x0/0x15c
 [<c0048628>] print_stack_trace+0x0/0x88
 [<c0038912>] __lock_is_held+0x3e/0x5e
 [<c003b894>] lock_acquire+0x8a/0xcc
 [<c01a50c4>] _raw_spin_lock+0x44/0x7a
 [<c0009290>] switch_mm+0x22/0xc6
 [<c01a06f8>] __schedule+0x0/0x648
 [<c01a0d76>] schedule+0x36/0x7c
 [<c0037d04>] trace_hardirqs_on+0x0/0x1e
 [<c0004e18>] do_work_pending+0x30/0xd4
 [<c000591a>] _work_pending+0xe/0x12

Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-09-05 00:56:50 +02:00
Rabin Vincent 94c5c115c1 CRISv32: enable LOCKDEP_SUPPORT
Now that we have stack tracing and irq flags tracing support,
we can also enable lockdep support

Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-09-05 00:56:50 +02:00
Rabin Vincent aa6f4d2b65 CRIS: add STACKTRACE_SUPPORT
Add stacktrace support, which is required for lockdep and tracing.  The
stack tracing simply looks at all kernel text symbols found on the
stack, similar to the trap stack dumping code, which can also be
converted to use this.

Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-09-05 00:56:50 +02:00
Rabin Vincent 3fffa23ee0 CRISv32: annotate irq enable in idle loop
Use a call to local_irq_enable() instead of incline asm so that the
irqsoff latency tracer knows that interrupts are enabled here.

Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-09-05 00:56:49 +02:00
Rabin Vincent 444e0c2881 CRISv32: add support for irqflags tracing
Add support irqflags tracing, which is required for things like lockdep
and ftrace.

Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-09-05 00:56:49 +02:00
Rabin Vincent 20ae247399 CRIS: UAPI: use generic types.h
CRIS' types.h is functionally identical to the asm-generic version.

Effective diff:

 +#ifndef _ASM_GENERIC_TYPES_H
 +#define _ASM_GENERIC_TYPES_H
 +
  #include <asm-generic/int-ll64.h>
 +
 +#endif

Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-09-05 00:56:48 +02:00
Rabin Vincent 258a9ff66c CRIS: UAPI: use generic shmbuf.h
CRIS' shmbuf.h is equivalent to the asm-generic verison.

Effective diff:

 -#ifndef _CRIS_SHMBUF_H
 -#define _CRIS_SHMBUF_H
 +#ifndef __ASM_GENERIC_SHMBUF_H
 +#define __ASM_GENERIC_SHMBUF_H
 +
 +#include <asm/bitsperlong.h>

  	struct ipc64_perm	shm_perm;
  	size_t			shm_segsz;
  	__kernel_time_t		shm_atime;
 +#if __BITS_PER_LONG != 64
  	unsigned long		__unused1;
 +#endif
  	__kernel_time_t		shm_dtime;
 +#if __BITS_PER_LONG != 64
  	unsigned long		__unused2;
 +#endif
  	__kernel_time_t		shm_ctime;
 +#if __BITS_PER_LONG != 64
  	unsigned long		__unused3;
 +#endif
  	__kernel_pid_t		shm_cpid;
  	__kernel_pid_t		shm_lpid;
 -	unsigned long		shm_nattch;
 -	unsigned long		__unused4;
 -	unsigned long		__unused5;
 +	__kernel_ulong_t	shm_nattch;
 +	__kernel_ulong_t	__unused4;
 +	__kernel_ulong_t	__unused5;
  };

  struct shminfo64 {
 -	unsigned long	shmmax;
 -	unsigned long	shmmin;
 -	unsigned long	shmmni;
 -	unsigned long	shmseg;
 -	unsigned long	shmall;
 -	unsigned long	__unused1;
 -	unsigned long	__unused2;
 -	unsigned long	__unused3;
 -	unsigned long	__unused4;
 +	__kernel_ulong_t	shmmax;
 +	__kernel_ulong_t	shmmin;
 +	__kernel_ulong_t	shmmni;
 +	__kernel_ulong_t	shmseg;
 +	__kernel_ulong_t	shmall;
 +	__kernel_ulong_t	__unused1;
 +	__kernel_ulong_t	__unused2;
 +	__kernel_ulong_t	__unused3;
 +	__kernel_ulong_t	__unused4;
  };

  #endif

Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-09-05 00:56:48 +02:00
Rabin Vincent 74d94adb35 CRIS: UAPI: use generic msgbuf.h
CRIS' msgbuf.h is equivalent to the asm-generic version.

Effective diff:

 -#ifndef _CRIS_MSGBUF_H
 -#define _CRIS_MSGBUF_H
 -
 -
 +#ifndef __ASM_GENERIC_MSGBUF_H
 +#define __ASM_GENERIC_MSGBUF_H

 +#include <asm/bitsperlong.h>

  struct msqid64_ds {
  	struct ipc64_perm msg_perm;
  	__kernel_time_t msg_stime;
 +#if __BITS_PER_LONG != 64
  	unsigned long	__unused1;
 +#endif
  	__kernel_time_t msg_rtime;
 +#if __BITS_PER_LONG != 64
  	unsigned long	__unused2;
 +#endif
  	__kernel_time_t msg_ctime;
 +#if __BITS_PER_LONG != 64
  	unsigned long	__unused3;
 -	unsigned long  msg_cbytes;
 -	unsigned long  msg_qnum;
 -	unsigned long  msg_qbytes;
 +#endif
 +	__kernel_ulong_t msg_cbytes;
 +	__kernel_ulong_t msg_qnum;
 +	__kernel_ulong_t msg_qbytes;
  	__kernel_pid_t msg_lspid;
  	__kernel_pid_t msg_lrpid;
 -	unsigned long  __unused4;
 -	unsigned long  __unused5;
 +	__kernel_ulong_t __unused4;
 +	__kernel_ulong_t __unused5;
  };

  #endif

Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-09-05 00:56:48 +02:00
Rabin Vincent 4526692251 CRIS: UAPI: use generic socket.h
CRIS' socket.h is equivalent to the asm-generic version.

Effective diff:

 -#ifndef _ASM_SOCKET_H
 -#define _ASM_SOCKET_H
 -
 -
 +#ifndef __ASM_GENERIC_SOCKET_H
 +#define __ASM_GENERIC_SOCKET_H

  #include <asm/sockios.h>

  #define SO_LINGER	13
  #define SO_BSDCOMPAT	14
  #define SO_REUSEPORT	15
 +#ifndef SO_PASSCRED
  #define SO_PASSCRED	16
  #define SO_PEERCRED	17
  #define SO_RCVLOWAT	18
  #define SO_SNDLOWAT	19
  #define SO_RCVTIMEO	20
  #define SO_SNDTIMEO	21
 +#endif

 #define SO_SECURITY_AUTHENTICATION		22

Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-09-05 00:56:47 +02:00
Rabin Vincent 53789d25a0 CRIS: UAPI: use generic sembuf.h
CRIS's sembuf.h is equivalent to the asm-generic version.
Effective diff:

 -#ifndef _CRIS_SEMBUF_H
 -#define _CRIS_SEMBUF_H
 +#ifndef __ASM_GENERIC_SEMBUF_H
 +#define __ASM_GENERIC_SEMBUF_H

 +#include <asm/bitsperlong.h>

  struct semid64_ds {
  	struct ipc64_perm sem_perm;
  	__kernel_time_t	sem_otime;
 +#if __BITS_PER_LONG != 64
  	unsigned long	__unused1;
 +#endif
  	__kernel_time_t	sem_ctime;
 +#if __BITS_PER_LONG != 64
  	unsigned long	__unused2;
 +#endif
  	unsigned long	sem_nsems;
  	unsigned long	__unused3;
  	unsigned long	__unused4;

Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-09-05 00:56:47 +02:00
Rabin Vincent c823b970b6 CRIS: UAPI: use generic sockios.h
CRIS' sockios.h is equivalent to the asm-generic version.

Effective diff:

 -#ifndef __ARCH_CRIS_SOCKIOS__
 -#define __ARCH_CRIS_SOCKIOS__
 +#ifndef __ASM_GENERIC_SOCKIOS_H
 +#define __ASM_GENERIC_SOCKIOS_H

Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-09-05 00:56:46 +02:00
Rabin Vincent 889d74a4d4 CRIS: UAPI: use generic auxvec.h
CRIS's auxvec.h is empty just like the asm-generic version.

Effective diff:

 -#ifndef __ASMCRIS_AUXVEC_H
 -#define __ASMCRIS_AUXVEC_H
 +#ifndef __ASM_GENERIC_AUXVEC_H
 +#define __ASM_GENERIC_AUXVEC_H
 +

Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-09-05 00:56:46 +02:00
Rabin Vincent 0c02fa2f4e CRIS: UAPI: use generic headers via Kbuild
Use Kbuild magic to include the generic headers.

Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-09-05 00:56:45 +02:00
Rabin Vincent 2493d3e28a CRIS: UAPI: fix elf.h export
CRIS userspace (uClibc for one) expects asm/elf.h to be exported but
this header appears to have gone missing at some point.  Move it to
uapi/ and export it.

Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-09-05 00:33:25 +02:00
Rabin Vincent 3a79a07537 CRIS: don't make asm/elf.h depend on asm/user.h
We're going to export asm/elf.h; remove its dependencies on the
non-exported asm/user.h and the unused asm/system.h include.

Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-09-05 00:33:25 +02:00
Rabin Vincent 835e417728 CRIS: UAPI: fix ptrace.h
The exported ptrace.h header on CRIS references an "arch" directory
which does not exist.  Fix this by having the variants in the same
directory and including them conditionally, similar to other
architectures.

Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-09-05 00:33:25 +02:00
Jesper Nilsson 4b86715748 CRISv32: Squash compile warnings for axisflashmap
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-09-05 00:33:25 +02:00
Jesper Nilsson 939b83fb03 CRISv32: Add GPIO driver to the default configs
Fix a number of small issues visible when GPIO is enabled:

- Correct missing default for !ETRAXFS in Kconfig
- Remove information on number of bits for some Kconfigs
  related to the GPIO, they are different in ETRAX FS and ARTPEC-3
- Fix compile warning in ARTPEC-3 GPIO driver

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-09-05 00:33:25 +02:00
Jesper Nilsson 9423017867 CRISv32: ETRAX FS: Squash warnings in pinmux driver
Squash the followng warnings

arch/cris/arch-v32/mach-fs/pinmux.c: In function 'crisv32_pinmux_alloc_fixed':
arch/cris/arch-v32/mach-fs/pinmux.c:104:2: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement]
arch/cris/arch-v32/mach-fs/pinmux.c: In function 'crisv32_pinmux_dealloc_fixed':
arch/cris/arch-v32/mach-fs/pinmux.c:238:2: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement]
arch/cris/arch-v32/mach-fs/pinmux.c: In function '__crisv32_pinmux_alloc':
arch/cris/arch-v32/mach-fs/pinmux.c:49:1: warning: control reaches end of non-void function [-Wreturn-type]

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-09-05 00:33:25 +02:00
Chen Gang ee59843cd2 CRIS: Wire up missing syscalls
The related warnings:

    CALL    scripts/checksyscalls.sh
  <stdin>:1229:2: warning: #warning syscall sched_setattr not implemented [-Wcpp]
  <stdin>:1232:2: warning: #warning syscall sched_getattr not implemented [-Wcpp]
  <stdin>:1235:2: warning: #warning syscall renameat2 not implemented [-Wcpp]
  <stdin>:1238:2: warning: #warning syscall seccomp not implemented [-Wcpp]
  <stdin>:1241:2: warning: #warning syscall getrandom not implemented [-Wcpp]
  <stdin>:1244:2: warning: #warning syscall memfd_create not implemented [-Wcpp]
  <stdin>:1247:2: warning: #warning syscall bpf not implemented [-Wcpp]
  <stdin>:1250:2: warning: #warning syscall execveat not implemented [-Wcpp]

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Jesper Nilsson <jespern@axis.com>
2015-09-05 00:33:25 +02:00
Rabin Vincent f59625a8f7 CRISv32: allow CONFIG_DEBUG_BUGVERBOSE
Support for verbose BUG reporting already exists, but the HAVE flag that
allows the option to be enabled is missing.

Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Jesper Nilsson <jespern@axis.com>
2015-09-05 00:33:25 +02:00
Rabin Vincent 98a725a57a CRISv32: add unreachable() to BUG()
Add an unreachable() in the BUG() implementations, to get rid of
several warnings similar to the one below:

 kernel/sched/core.c: In function 'pick_next_task':
 kernel/sched/core.c:2690:1: warning: control reaches end of non-void function [-Wreturn-type]

Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Jesper Nilsson <jespern@axis.com>
2015-09-05 00:33:24 +02:00
Christophe Jaillet 6a4756f695 cris: arch-v32: gpio: Use kzalloc instead of kmalloc/memset
Turn a kmalloc/memset into an equivalent kzalloc.
Doing so also move the zero'ing of the memory outside of a mutex.

Signed-off-by: Christophe Jaillet <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jesper Nilsson <jespern@axis.com>
2015-09-05 00:33:24 +02:00
Viresh Kumar 2b5cf54493 cris/time: Migrate to new 'set-state' interface
Migrate cris driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Rabin Vincent <rabin@rab.in>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-cris-kernel@axis.com
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-08-10 11:41:08 +02:00
Laurent Dufour f2abeef9fd mm: clean up per architecture MM hook header files
Commit 2ae416b142 ("mm: new mm hook framework") introduced an empty
header file (mm-arch-hooks.h) for every architecture, even those which
doesn't need to define mm hooks.

As suggested by Geert Uytterhoeven, this could be cleaned through the use
of a generic header file included via each per architecture
asm/include/Kbuild file.

The PowerPC architecture is not impacted here since this architecture has
to defined the arch_remap MM hook.

Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-17 16:39:53 -07:00
Thomas Gleixner 0ec62aaee9 cris: Replace do_posix_clock_monotonic_gettime()
ktime_get_ts() is the proper interface today.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
2015-07-09 10:51:46 +02:00
Chris Metcalf a6e2f029ae Make asm/word-at-a-time.h available on all architectures
Added the x86 implementation of word-at-a-time to the
generic version, which previously only supported big-endian.

Omitted the x86-specific load_unaligned_zeropad(), which in
any case is also not present for the existing BE-only
implementation of a word-at-a-time, and is only used under
CONFIG_DCACHE_WORD_ACCESS.

Added as a "generic-y" to the Kbuilds of all architectures
that didn't previously have it.

Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com>
2015-07-08 16:41:55 -04:00
Linus Torvalds 2d4407079c Replace module_init with equivalent device_initcall in non modules.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVkO5XAAoJEOvOhAQsB9HWe4cQAJcsmSXIDN2O6oxvgH8Wilof
 EIEMvT13uwBdsjQdYUY6A6B3iUV9wzEEgoosg/JRgpz5/b1FTDMIO4arUPD3Lcak
 5bmyVO2qAT+yaLAWSgn6I8DMplXrKiEuK+TkH/mW3p9TdvElLdG3Vg6UI407hSWv
 W0QbVwkNtv8XmzshV9F2YdmflT8j1PgYxIu/tEkVOWn37DNW+Fp2OVBrdTIYp3AJ
 X6bYZPEcQDCrWWW/s2GmIDrNgryiebasns+CAgGY21262jAYaRcFOJmR47AsTqW7
 DSZXIlLc/gJca++hfxqV15RZ4NRHxrebCypTsPtZUV7ZiYHI726eeUZzxsp/9itu
 mvhmi+aQUTTUP3dDhiv05f4syAKEb4zslT6SLwcna6oi09M97HfCeQsHqhcFq/MG
 KnS2JJoJQToQtJvMUXMQzp5hyHjNlOclIvCxEiL32EZU54PeJOKasy/mptNGEctk
 TxACWvoXBQglRaVN+1wIjjr0BaHJSuJa9CUnIfM4WZdSHiMQMx00XLTkZcTnSM6R
 12pE54vVolrXswGPJhy4W/Sf1yPSW1tkWSVBbkKLyCIrlAWJtu68rXhvwhG/nz6E
 3g6QrDEQGlk6bzUH4CJCEqXLPRN1bNS0XjdkEFh60Lury3Ns5yHKZXPW5vCQ5csr
 FQNUyBs595CWbJNfbn1n
 =0BDx
 -----END PGP SIGNATURE-----

Merge tag 'module_init-device_initcall-v4.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux

Pull module_init replacement part one from Paul Gortmaker:
 "Replace module_init with equivalent device_initcall in non modules.

  This series of commits converts non-modular code that is using the
  module_init() call to hook itself into the system to instead use
  device_initcall().

  The conversion is a runtime no-op, since module_init actually becomes
  __initcall in the non-modular case, and that in turn gets mapped onto
  device_initcall.  A couple files show a larger negative diffstat,
  representing ones that had a module_exit function that we remove here
  vs previously relying on the linker to dispose of it.

  We make this conversion now, so that we can relocate module_init from
  init.h into module.h in the future.

  The files changed here are just limited to those that would otherwise
  have to add module.h to obviously non-modular code, in order to avoid
  a compile fail, as testing has shown"

* tag 'module_init-device_initcall-v4.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:
  MIPS: don't use module_init in non-modular cobalt/mtd.c file
  drivers/leds: don't use module_init in non-modular leds-cobalt-raq.c
  cris: don't use module_init for non-modular core eeprom.c code
  tty/metag_da: Avoid module_init/module_exit in non-modular code
  drivers/clk: don't use module_init in clk-nomadik.c which is non-modular
  xtensa: don't use module_init for non-modular core network.c code
  sh: don't use module_init in non-modular psw.c code
  mn10300: don't use module_init in non-modular flash.c code
  parisc64: don't use module_init for non-modular core perf code
  parisc: don't use module_init for non-modular core pdc_cons code
  cris: don't use module_init for non-modular core intmem.c code
  ia64: don't use module_init in non-modular sim/simscsi.c code
  ia64: don't use module_init for non-modular core kernel/mca.c code
  arm: don't use module_init in non-modular mach-vexpress/spc.c code
  powerpc: don't use module_init in non-modular 83xx suspend code
  powerpc: use device_initcall for registering rtc devices
  x86: don't use module_init in non-modular devicetree.c code
  x86: don't use module_init in non-modular intel_mid_vrtc.c
2015-07-02 10:30:48 -07:00
Linus Torvalds ad90fb9751 Merge branch 'for-4.2/sg' of git://git.kernel.dk/linux-block
Pull asm/scatterlist.h removal from Jens Axboe:
 "We don't have any specific arch scatterlist anymore, since parisc
  finally switched over.  Kill the include"

* 'for-4.2/sg' of git://git.kernel.dk/linux-block:
  remove scatterlist.h generation from arch Kbuild files
  remove <asm/scatterlist.h>
2015-06-25 15:22:36 -07:00
Laurent Dufour 2ae416b142 mm: new mm hook framework
CRIU is recreating the process memory layout by remapping the checkpointee
memory area on top of the current process (criu).  This includes remapping
the vDSO to the place it has at checkpoint time.

However some architectures like powerpc are keeping a reference to the
vDSO base address to build the signal return stack frame by calling the
vDSO sigreturn service.  So once the vDSO has been moved, this reference
is no more valid and the signal frame built later are not usable.

This patch serie is introducing a new mm hook framework, and a new
arch_remap hook which is called when mremap is done and the mm lock still
hold.  The next patch is adding the vDSO remap and unmap tracking to the
powerpc architecture.

This patch (of 3):

This patch introduces a new set of header file to manage mm hooks:
- per architecture empty header file (arch/x/include/asm/mm-arch-hooks.h)
- a generic header (include/linux/mm-arch-hooks.h)

The architecture which need to overwrite a hook as to redefine it in its
header file, while architecture which doesn't need have nothing to do.

The default hooks are defined in the generic header and are used in the
case the architecture is not defining it.

In a next step, mm hooks defined in include/asm-generic/mm_hooks.h should
be moved here.

Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-24 17:49:41 -07:00
Paul Gortmaker 84c3e5bf1d cris: don't use module_init for non-modular core eeprom.c code
The eeprom.c code is compiled based on the Kconfig setting
ETRAX_I2C_EEPROM, which is bool.  So the code is either built in
or absent.  It will never be modular, so using module_init as an
alias for __initcall is rather misleading.

Fix this up now, so that we can relocate module_init from
init.h into module.h in the future.  If we don't do this, we'd
have to add module.h to obviously non-modular code, and that
would be a worse thing.

Direct use of __initcall is discouraged, vs prioritized ones.
Use of device_initcall is consistent with what __initcall
maps onto, and hence does not change the init order, making the
impact of this change zero.   Should someone with real hardware
for boot testing want to change it later to arch_initcall or
something different, they can do that at a later date.

Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: linux-cris-kernel@axis.com
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2015-06-16 14:12:31 -04:00
Paul Gortmaker 73de14e8cd cris: don't use module_init for non-modular core intmem.c code
The intmem.c code is always built in.  It will never be modular,
so using module_init as an alias for __initcall is rather
misleading.

Fix this up now, so that we can relocate module_init from
init.h into module.h in the future.  If we don't do this, we'd
have to add module.h to obviously non-modular code, and that
would be a worse thing.

Direct use of __initcall is discouraged, vs prioritized ones.
Use of device_initcall is consistent with what __initcall
maps onto, and hence does not change the init order, making the
impact of this change zero.   Should someone with real hardware
for boot testing want to change it later to arch_initcall or
something different, they can do that at a later date.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: linux-cris-kernel@axis.com
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2015-06-16 14:12:30 -04:00
Christoph Hellwig c546d5db75 remove scatterlist.h generation from arch Kbuild files
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-19 09:14:34 -06:00
David Hildenbrand 70ffdb9393 mm/fault, arch: Use pagefault_disable() to check for disabled pagefaults in the handler
Introduce faulthandler_disabled() and use it to check for irq context and
disabled pagefaults (via pagefault_disable()) in the pagefault handlers.

Please note that we keep the in_atomic() checks in place - to detect
whether in irq context (in which case preemption is always properly
disabled).

In contrast, preempt_disable() should never be used to disable pagefaults.
With !CONFIG_PREEMPT_COUNT, preempt_disable() doesn't modify the preempt
counter, and therefore the result of in_atomic() differs.
We validate that condition by using might_fault() checks when calling
might_sleep().

Therefore, add a comment to faulthandler_disabled(), describing why this
is needed.

faulthandler_disabled() and pagefault_disable() are defined in
linux/uaccess.h, so let's properly add that include to all relevant files.

This patch is based on a patch from Thomas Gleixner.

Reviewed-and-tested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: David.Laight@ACULAB.COM
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: airlied@linux.ie
Cc: akpm@linux-foundation.org
Cc: benh@kernel.crashing.org
Cc: bigeasy@linutronix.de
Cc: borntraeger@de.ibm.com
Cc: daniel.vetter@intel.com
Cc: heiko.carstens@de.ibm.com
Cc: herbert@gondor.apana.org.au
Cc: hocko@suse.cz
Cc: hughd@google.com
Cc: mst@redhat.com
Cc: paulus@samba.org
Cc: ralf@linux-mips.org
Cc: schwidefsky@de.ibm.com
Cc: yang.shi@windriver.com
Link: http://lkml.kernel.org/r/1431359540-32227-7-git-send-email-dahi@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-19 08:39:15 +02:00
Christoph Hellwig 84be456f88 remove <asm/scatterlist.h>
We don't have any arch specific scatterlist now that parisc switched over
to the generic one.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-05 13:35:39 -06:00
Linus Torvalds 7f9f44308c CRIS changes for 4.1
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iEYEABECAAYFAlU70nMACgkQ31LbvUHyf1cYgwCfSmPhyLFmr0pGM/BxsVY7K1v6
 PaEAn2+7xfZV38E6hwrGMrT42ZvKyL6r
 =LHQU
 -----END PGP SIGNATURE-----

Merge tag 'cris-for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris

Pull arch/cris updates from Jesper Nilsson:
 "Some much needed love for the CRIS-port.

  There's a bunch of changes this time, giving the CRISv32 port a bit of
  modern makeover with device-tree, irq domain and gpiolib support, and
  more switchover to generic frameworks.

  Some small fixes and removal of the theoretical SMP support brings up
  the rear"

* tag 'cris-for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris:
  cris: fix integer overflow in ELF_ET_DYN_BASE
  CRISv32: use GENERIC_SCHED_CLOCK
  CRISv32: use MMIO clocksource
  CRISv32: use generic clockevents
  CRIS: use generic headers via Kbuild
  CRIS: use generic cmpxchg.h
  CRIS: use generic atomic.h
  CRIS: use generic atomic bitops
  CRISv10: remove redundant macros from system.h
  CRIS: remove SMP code
  CRISv32: don't enable irqs in INIT_THREAD
  CRISv32: handle multiple signals
  CRISv32: prevent bogus restarts on sigreturn
  CRISv32: don't attempt syscall restart on irq exit
  Add binding documentation for CRIS
  CRIS: add Axis 88 board device tree
  CRISv32: add device tree support
  CRISv32: add irq domains support
  CRIS: enable GPIOLIB
2015-04-26 13:31:05 -07:00
Linus Torvalds eea3a00264 Merge branch 'akpm' (patches from Andrew)
Merge second patchbomb from Andrew Morton:

 - the rest of MM

 - various misc bits

 - add ability to run /sbin/reboot at reboot time

 - printk/vsprintf changes

 - fiddle with seq_printf() return value

* akpm: (114 commits)
  parisc: remove use of seq_printf return value
  lru_cache: remove use of seq_printf return value
  tracing: remove use of seq_printf return value
  cgroup: remove use of seq_printf return value
  proc: remove use of seq_printf return value
  s390: remove use of seq_printf return value
  cris fasttimer: remove use of seq_printf return value
  cris: remove use of seq_printf return value
  openrisc: remove use of seq_printf return value
  ARM: plat-pxa: remove use of seq_printf return value
  nios2: cpuinfo: remove use of seq_printf return value
  microblaze: mb: remove use of seq_printf return value
  ipc: remove use of seq_printf return value
  rtc: remove use of seq_printf return value
  power: wakeup: remove use of seq_printf return value
  x86: mtrr: if: remove use of seq_printf return value
  linux/bitmap.h: improve BITMAP_{LAST,FIRST}_WORD_MASK
  MAINTAINERS: CREDITS: remove Stefano Brivio from B43
  .mailmap: add Ricardo Ribalda
  CREDITS: add Ricardo Ribalda Delgado
  ...
2015-04-15 16:39:15 -07:00
Joe Perches dc640a8813 cris fasttimer: remove use of seq_printf return value
The seq_printf return value, because it's frequently misused,
will eventually be converted to void.

See: commit 1f33c41c03 ("seq_file: Rename seq_overflow() to
     seq_has_overflowed() and make public")

Miscellanea:

o Coalesce formats, realign arguments

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 16:35:25 -07:00
Joe Perches 1336d4221d cris: remove use of seq_printf return value
The seq_printf return value, because it's frequently misused,
will eventually be converted to void.

See: commit 1f33c41c03 ("seq_file: Rename seq_overflow() to
     seq_has_overflowed() and make public")

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 16:35:25 -07:00
Richard Weinberger fa41b1c7df arch: Remove exec_domain from remaining archs
Signed-off-by: Richard Weinberger <richard@nod.at>
2015-04-12 21:03:30 +02:00
Andrey Ryabinin d939b52abe cris: fix integer overflow in ELF_ET_DYN_BASE
Almost all arches define ELF_ET_DYN_BASE as 2/3 of TASK_SIZE.
Though it seems that some architectures do this in a wrong way.
The problem is that 2*TASK_SIZE may overflow 32-bits so
the real ELF_ET_DYN_BASE becomes wrong.
Fix this overflow by dividing TASK_SIZE prior to multiplying:
	(TASK_SIZE / 3 * 2)

Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Signed-off-by: Jesper Nilsson <jespern@axis.com>
2015-03-25 11:35:12 +01:00
Rabin Vincent d3dad475b2 CRISv32: use GENERIC_SCHED_CLOCK
Provide a fast sched clock using the free-running timer and the generic
sched_clock infrastructure.

Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Jesper Nilsson <jespern@axis.com>
2015-03-25 11:03:41 +01:00
Rabin Vincent edfb6d5f1a CRISv32: use MMIO clocksource
Use a generic MMIO clocksource and get rid of some lines of code.

Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Jesper Nilsson <jespern@axis.com>
2015-03-25 11:03:40 +01:00
Rabin Vincent ed9fd3ff02 CRISv32: use generic clockevents
Implement a oneshot-capable clockevents device so we get support for
things like hrtimers and NOHZ.

Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Jesper Nilsson <jespern@axis.com>
2015-03-25 11:03:40 +01:00
Rabin Vincent 16428f943d CRIS: use generic headers via Kbuild
Delete headers which do nothing but include the asm-generic versions and
use Kbuild magic instead.

Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Jesper Nilsson <jespern@axis.com>
2015-03-25 10:57:27 +01:00
Rabin Vincent f87a2f58e3 CRIS: use generic cmpxchg.h
CRIS can use asm-generic's cmpxchg.h

Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Jesper Nilsson <jespern@axis.com>
2015-03-25 10:57:07 +01:00
Rabin Vincent e7db8a3c96 CRIS: use generic atomic.h
CRIS can use asm-generic's atomic.h.

Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Jesper Nilsson <jespern@axis.com>
2015-03-25 10:57:03 +01:00