They were identical execpt to CIFSTCon() vs. SMB2_tcon().
These are also available via ops->tree_connect().
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
RHBZ 1145308
Some very old server may not support SetPathInfo to adjust the timestamps
of directories. For these servers, try to open the directory and use SetFileInfo.
Minor correction to patch included that was
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Tested-by: Kenneth D'souza <kdsouza@redhat.com>
Joe Perches pointed out that we were missing a newline
at the end of two debug messages
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Use pr_fmt to standardize all logging for fs/cifs.
Some logging output had no CIFS: specific prefix.
Now all output has one of three prefixes:
o CIFS:
o CIFS: VFS:
o Root-CIFS:
Miscellanea:
o Convert printks to pr_<level>
o Neaten macro definitions
o Remove embedded CIFS: prefixes from formats
o Convert "illegal" to "invalid"
o Coalesce formats
o Add missing '\n' format terminations
o Consolidate multiple cifs_dbg continuations into single calls
o More consistent use of upper case first word output logging
o Multiline statement argument alignment and wrapping
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
In order to support reconnect to hostnames that resolve to same ip
address, besides relying on the currently set hostname to match DFS
targets, attempt to resolve the targets and then match their addresses
with the reconnected server ip address.
For instance, if we have two hostnames "FOO" and "BAR", and both
resolve to the same ip address, we would be able to handle failover in
DFS paths like
\\FOO\dfs\link1 -> [ \BAZ\share2 (*), \BAR\share1 ]
\\FOO\dfs\link2 -> [ \BAZ\share2 (*), \FOO\share1 ]
so when "BAZ" is no longer accessible, link1 and link2 would get
reconnected despite having different target hostnames.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The variable rc is being initialized with a value that is never read
and it is being updated later with a new value. The initialization is
redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Failed async writes that are requeued may not clean up a refcount
on the file, which can result in a leaked open. This scenario arises
very reliably when using persistent handles and a reconnect occurs
while writing.
cifs_writev_requeue only releases the reference if the write fails
(rc != 0). The server->ops->async_writev operation will take its own
reference, so the initial reference can always be released.
Signed-off-by: Adam McCoy <adam@forsedomani.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Found a read performance issue when linux kernel page size is 64KB.
If linux kernel page size is 64KB and mount options cache=strict &
vers=2.1+, it does not support cifs_readpages(). Instead, it is using
cifs_readpage() and cifs_read() with maximum read IO size 16KB, which is
much slower than read IO size 1MB when negotiated SMB 2.1+. Since modern
SMB server supported SMB 2.1+ and Max Read Size can reach more than 64KB
(for example 1MB ~ 8MB), this patch check max_read instead of maxBuf to
determine whether server support readpages() and improve read performance
for page size 64KB & cache=strict & vers=2.1+, and for SMB1 it is more
cleaner to initialize server->max_read to server->maxBuf.
The client is a linux box with linux kernel 4.2.8,
page size 64KB (CONFIG_ARM64_64K_PAGES=y),
cpu arm 1.7GHz, and use mount.cifs as smb client.
The server is another linux box with linux kernel 4.2.8,
share a file '10G.img' with size 10GB,
and use samba-4.7.12 as smb server.
The client mount a share from the server with different
cache options: cache=strict and cache=none,
mount -tcifs //<server_ip>/Public /cache_strict -overs=3.0,cache=strict,username=<xxx>,password=<yyy>
mount -tcifs //<server_ip>/Public /cache_none -overs=3.0,cache=none,username=<xxx>,password=<yyy>
The client download a 10GbE file from the server across 1GbE network,
dd if=/cache_strict/10G.img of=/dev/null bs=1M count=10240
dd if=/cache_none/10G.img of=/dev/null bs=1M count=10240
Found that cache=strict (without patch) is slower read throughput and
smaller read IO size than cache=none.
cache=strict (without patch): read throughput 40MB/s, read IO size is 16KB
cache=strict (with patch): read throughput 113MB/s, read IO size is 1MB
cache=none: read throughput 109MB/s, read IO size is 1MB
Looks like if page size is 64KB,
cifs_set_ops() would use cifs_addr_ops_smallbuf instead of cifs_addr_ops,
/* check if server can support readpages */
if (cifs_sb_master_tcon(cifs_sb)->ses->server->maxBuf <
PAGE_SIZE + MAX_CIFS_HDR_SIZE)
inode->i_data.a_ops = &cifs_addr_ops_smallbuf;
else
inode->i_data.a_ops = &cifs_addr_ops;
maxBuf is came from 2 places, SMB2_negotiate() and CIFSSMBNegotiate(),
(SMB2_MAX_BUFFER_SIZE is 64KB)
SMB2_negotiate():
/* set it to the maximum buffer size value we can send with 1 credit */
server->maxBuf = min_t(unsigned int, le32_to_cpu(rsp->MaxTransactSize),
SMB2_MAX_BUFFER_SIZE);
CIFSSMBNegotiate():
server->maxBuf = le32_to_cpu(pSMBr->MaxBufferSize);
Page size 64KB and cache=strict lead to read_pages() use cifs_readpage()
instead of cifs_readpages(), and then cifs_read() using maximum read IO
size 16KB, which is much slower than maximum read IO size 1MB.
(CIFSMaxBufSize is 16KB by default)
/* FIXME: set up handlers for larger reads and/or convert to async */
rsize = min_t(unsigned int, cifs_sb->rsize, CIFSMaxBufSize);
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Jones Syue <jonessyue@qnap.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
cap_unix(ses) defaults to false for SMB2.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This means it's consistently called and the callers don't need to
care about it.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
For the case where we have a DFS path like below and we're currently
connected to targetA:
//dfsroot/link -> //targetA/share/foo, //targetB/share/bar
after failover, we should make sure to update cifs_sb->prepath so the
next operations will use the new prefix path "/bar".
Besides, in order to simplify the use of different prefix paths,
enforce CIFS_MOUNT_USE_PREFIX_PATH for DFS mounts so we don't have to
revalidate the root dentry every time we set a new prefix path.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
To rename a file in SMB2 we open it with the DELETE access and do a
special SetInfo on it. If the handle is missing the DELETE bit the
server will fail the SetInfo with STATUS_ACCESS_DENIED.
We currently try to reuse any existing opened handle we have with
cifs_get_writable_path(). That function looks for handles with WRITE
access but doesn't check for DELETE, making rename() fail if it finds
a handle to reuse. Simple reproducer below.
To select handles with the DELETE bit, this patch adds a flag argument
to cifs_get_writable_path() and find_writable_file() and the existing
'bool fsuid_only' argument is converted to a flag.
The cifsFileInfo struct only stores the UNIX open mode but not the
original SMB access flags. Since the DELETE bit is not mapped in that
mode, this patch stores the access mask in cifs_fid on file open,
which is accessible from cifsFileInfo.
Simple reproducer:
#include <stdio.h>
#include <stdlib.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <unistd.h>
#define E(s) perror(s), exit(1)
int main(int argc, char *argv[])
{
int fd, ret;
if (argc != 3) {
fprintf(stderr, "Usage: %s A B\n"
"create&open A in write mode, "
"rename A to B, close A\n", argv[0]);
return 0;
}
fd = openat(AT_FDCWD, argv[1], O_WRONLY|O_CREAT|O_SYNC, 0666);
if (fd == -1) E("openat()");
ret = rename(argv[1], argv[2]);
if (ret) E("rename()");
ret = close(fd);
if (ret) E("close()");
return ret;
}
$ gcc -o bugrename bugrename.c
$ ./bugrename /mnt/a /mnt/b
rename(): Permission denied
Fixes: 8de9e86c67 ("cifs: create a helper to find a writeable handle by path name")
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
RHBZ: 1795423
This is the SMB1 version of a patch we already have for SMB2
In recent DFS updates we have a new variable controlling how many times we will
retry to reconnect the share.
If DFS is not used, then this variable is initialized to 0 in:
static inline int
dfs_cache_get_nr_tgts(const struct dfs_cache_tgt_list *tl)
{
return tl ? tl->tl_numtgts : 0;
}
This means that in the reconnect loop in smb2_reconnect() we will immediately wrap retries to -1
and never actually get to pass this conditional:
if (--retries)
continue;
The effect is that we no longer reach the point where we fail the commands with -EHOSTDOWN
and basically the kernel threads are virtually hung and unkillable.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Fixes coccicheck warning:
fs/cifs/cifssmb.c:4622:3-22: WARNING: Assignment of 0/1 to bool variable
fs/cifs/cifssmb.c:4756:3-22: WARNING: Assignment of 0/1 to bool variable
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
SMB2_tdis() checks if a root handle is valid in order to decide
whether it needs to close the handle or not. However if another
thread has reference for the handle, it may end up with putting
the reference twice. The extra reference that we want to put
during the tree disconnect is the reference that has a directory
lease. So, track the fact that we have a directory lease and
close the handle only in that case.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We need to populate an ACL (security descriptor open context)
on file and directory correct. This patch passes in the
mode. Followon patch will build the open context and the
security descriptor (from the mode) that goes in the open
context.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
The variable ret is being initialized however this is never read
and later it is being reassigned to a new value. The initialization
is redundant and hence can be removed.
Addresses-Coverity: ("Unused Value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Using strscpy is cleaner, and avoids some problems with
handling maximum length strings. Linus noticed the
original problem and Aurelien pointed out some additional
problems. Fortunately most of this is SMB1 code (and
in particular the ASCII string handling older, which
is less common).
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Change return from int to void of convert_ace_to_cifs_ace as it never
fails.
fixes below issue reported by coccicheck
fs/cifs/cifssmb.c:3606:7-9: Unneeded variable: "rc". Return "0" on line
3620
Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
SMB3 ACL support is needed for many use cases now and should not be
ifdeffed out, even for SMB1 (CIFS). Remove the CONFIG_CIFS_ACL
ifdef so ACL support is always built into cifs.ko
Signed-off-by: Steve French <stfrench@microsoft.com>
The flags were named confusingly.
CIFS_ASYNC_OP now just means that we will not block waiting for credits
to become available so we thus rename this to be CIFS_NON_BLOCKING.
Change CIFS_NO_RESP to CIFS_NO_RSP_BUF to clarify that we will actually get a
response from the server but we will not get/do not want a response buffer.
Delete CIFSSMBNotify. This is an SMB1 function that is not used.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
For SMB1 oplock breaks we would grab one credit while sending the PDU
but we would never relese the credit back since we will never receive a
response to this from the server. Eventuallt this would lead to a hang
once all credits are leaked.
Fix this by defining a new flag CIFS_NO_SRV_RSP which indicates that there
is no server response to this command and thus we need to add any credits back
immediately after sending the PDU.
CC: Stable <stable@vger.kernel.org> #v5.0+
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Now we just return NULL cifsFileInfo pointer in cases we didn't find
or couldn't reopen a file. This hides errors from cifs_reopen_file()
especially retryable errors which should be handled appropriately.
Create new cifs_get_writable_file() routine that returns error codes
from cifs_reopen_file() and use it in the writeback codepath.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The reconnect might have happended after we obtained credits
and before we acquired srv_mutex. Check for that under the mutex
and retry an async operation if the reconnect is detected.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Every time after a session reconnect we don't need to account for
credits obtained in previous sessions. Make use of the recently
added cifs_credits structure to properly calculate credits for
non-MTU requests the same way we did for MTU ones.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
There are a couple places where we still account for 4 bytes
in the beginning of SMB2 packet which is not true in the current
code. Fix this to use a header preamble size where possible.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Even if a response is malformed, we should count credits
granted by the server to avoid miscalculations and unnecessary
reconnects due to client or server bugs. If the response has
been received partially, the session will be reconnected anyway
on the next iteration of the demultiplex thread, so counting
credits for such cases shouldn't break things.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
a trivial patch that replaces all use of snprintf with scnprintf.
scnprintf() is generally seen as a safer function to use than
snprintf for many use cases.
In our case, there is no actual difference between the two since we never
look at the return value. Thus we did not have any of the bugs that
scnprintf protects against and the patch does nothing.
However, for people reading our code it will be a receipt that we
have done our due dilligence and checked our code for this type of bugs.
See the presentation "Making C Less Dangerous In The Linux Kernel"
at this years LCA
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
If we don't find a writable file handle when retrying writepages
we break of the loop and do not unlock and put pages neither from
wdata2 nor from the original wdata. Fix this by walking through
all the remaining pages and cleanup them properly.
Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently we mark MID as malformed if we get an error from server
in a read response. This leads to not properly processing credits
in the readv callback. Fix this by marking such a response as
normal received response and process it appropriately.
Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This patch aims to address writeback code problems related to error
paths. In particular it respects EINTR and related error codes and
stores and returns the first error occurred during writeback.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This addresses some compile warnings that you can
see depending on configuration settings.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
After a successful failover, the cifs_reconnect_tcon() function will
make sure to reconnect every tcon to new target server.
Same as previous commit but for SMB1 codepath.
Signed-off-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When issuing SMB1 read/write, pass the page offset to transport.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
For a network file system we generally prefer large i/o, but
if the server returns invalid file system block/sector sizes
in cifs (vers=1.0) QFSInfo then set block size to a default
of a reasonable minimum (4K).
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
A powerpc build of cifs with gcc v8.2.0 produces this warning:
fs/cifs/cifssmb.c: In function ‘CIFSSMBNegotiate’:
fs/cifs/cifssmb.c:605:3: warning: ‘strncpy’ writing 16 bytes into a region of size 1 overflows the destination [-Wstringop-overflow=]
strncpy(pSMB->DialectsArray+count, protocols[i].name, 16);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Since we are already doing a strlen() on the source, change the strncpy
to a memcpy().
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Steve French <stfrench@microsoft.com>
In cifs, the timestamps are stored in memory in the cifs_fattr structure,
which uses the deprecated 'timespec' structure. Now that the VFS code
has moved on to 'timespec64', the next step is to change over the fattr
as well.
This also makes 32-bit and 64-bit systems behave the same way, and
no longer overflow the 32-bit time_t in year 2038.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
For every request we send, whether it is SMB1 or SMB2+, we attempt to
reconnect tcon (cifs_reconnect_tcon or smb2_reconnect) before carrying
out the request.
So, while server->tcpStatus != CifsNeedReconnect, we wait for the
reconnection to succeed on wait_event_interruptible_timeout(). If it
returns, that means that either the condition was evaluated to true, or
timeout elapsed, or it was interrupted by a signal.
Since we're not handling the case where the process woke up due to a
received signal (-ERESTARTSYS), the next call to
wait_event_interruptible_timeout() will _always_ fail and we end up
looping forever inside either cifs_reconnect_tcon() or smb2_reconnect().
Here's an example of how to trigger that:
$ mount.cifs //foo/share /mnt/test -o
username=foo,password=foo,vers=1.0,hard
(break connection to server before executing bellow cmd)
$ stat -f /mnt/test & sleep 140
[1] 2511
$ ps -aux -q 2511
USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
root 2511 0.0 0.0 12892 1008 pts/0 S 12:24 0:00 stat -f
/mnt/test
$ kill -9 2511
(wait for a while; process is stuck in the kernel)
$ ps -aux -q 2511
USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
root 2511 83.2 0.0 12892 1008 pts/0 R 12:24 30:01 stat -f
/mnt/test
By using 'hard' mount point means that cifs.ko will keep retrying
indefinitely, however we must allow the process to be killed otherwise
it would hang the system.
Signed-off-by: Paulo Alcantara <palcantara@suse.de>
Cc: stable@vger.kernel.org
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Use a read lease for the cached root fid so that we can detect
when the content of the directory changes (via a break) at which time
we close the handle. On next access to the root the handle will be reopened
and cached again.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add a function to allocate wdata without allocating pages for data
transfer. This gives the caller an option to pass a number of pages that
point to the data buffer to write to.
wdata is reponsible for free those pages after it's done.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
In SMB2/SMB3 unlike in cifs we unnecessarily open the root of the share
over and over again in various places during mount and path revalidation
and also in statfs. This patch cuts redundant traffic (opens and closes)
by simply keeping the directory handle for the root around (and reopening
it as needed on reconnect), so query calls don't require three round
trips to copmlete - just one, and eases load on network, client and
server (on mount alone, cuts network traffic by more than a third).
Also add a new cifs mount parm "nohandlecache" to allow users whose
servers might have resource constraints (eg in case they have a server
with so many users connecting to it that this extra handle per mount
could possibly be a resource concern).
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
SMB server will not sign data transferred through RDMA read/write. When
signing is used, it's a good idea to have all the data signed.
In this case, use RDMA send/recv for all data transfers. This will degrade
performance as this is not generally configured in RDMA environemnt. So
warn the user on signing and RDMA send/recv.
Signed-off-by: Long Li <longli@microsoft.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
and get rid of some get_rfc1002_length() in smb2
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Adding an extra debug message to show if a tree connect failure during
reconnect (and made it a log once so it doesn't spam the logs).
Saw a case recently where tree connect repeatedly returned
access denied on reconnect and it wasn't as easy to spot as it
should have been.
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
This variable is set to 4 for all protocol versions and replaces
the hardcoded constant 4 throughought the code.
This will later be updated to reflect whether a response packet
has a 4 byte length preamble or not once we start removing this
field from the SMB2+ dialects.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
This bug was fixed before, but came up again with the latest
compiler in another function:
fs/cifs/cifssmb.c: In function 'CIFSSMBSetEA':
fs/cifs/cifssmb.c:6362:3: error: 'strncpy' offset 8 is out of the bounds [0, 4] [-Werror=array-bounds]
strncpy(parm_data->list[0].name, ea_name, name_len);
Let's apply the same fix that was used for the other instances.
Fixes: b2a3ad9ca5 ("cifs: silence compiler warnings showing up with gcc-4.7.0")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Steve French <smfrench@gmail.com>
* Remove ses->ipc_tid.
* Make IPC$ regular tcon.
* Add a direct pointer to it in ses->tcon_ipc.
* Distinguish PIPE tcon from IPC tcon by adding a tcon->pipe flag. All
IPC tcons are pipes but not all pipes are IPC.
* All TreeConnect functions now cannot take a NULL tcon object.
The IPC tcon has the same lifetime as the session it belongs to. It is
created when the session is created and destroyed when the session is
destroyed.
Since no mounts directly refer to the IPC tcon, its refcount should
always be set to initialisation value (1). Thus we make sure
cifs_put_tcon() skips it.
If the mount request resulting in a new session being created requires
encryption, try to require it too for IPC.
* set SERVER_NAME_LENGTH to serverName actual size
The maximum length of an ipv6 string representation is defined in
INET6_ADDRSTRLEN as 45+1 for null but lets keep what we know works.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Gustavo A. R. Silva