Add support for ND_REGION_ASYNC capability if the device tree
indicates 'ibm,hcall-flush-required' property in the NVDIMM node.
Flush is done by issuing H_SCM_FLUSH hcall to the hypervisor.
If the flush request failed, the hypervisor is expected to
to reflect the problem in the subsequent nvdimm H_SCM_HEALTH call.
This patch prevents mmap of namespaces with MAP_SYNC flag if the
nvdimm requires an explicit flush[1].
References:
[1] https://github.com/avocado-framework-tests/avocado-misc-tests/blob/master/memory/ndctl.py.data/map_sync.c
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
[mpe: Use unsigned long / long instead of uint64_t/int64_t]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/161703936121.36.7260632399582101498.stgit@e1fbed493c87
of_get_mac_address() returns a "const void*" pointer to a MAC address.
Lately, support to fetch the MAC address by an NVMEM provider was added.
But this will only work with platform devices. It will not work with
PCI devices (e.g. of an integrated root complex) and esp. not with DSA
ports.
There is an of_* variant of the nvmem binding which works without
devices. The returned data of a nvmem_cell_read() has to be freed after
use. On the other hand the return of_get_mac_address() points to some
static data without a lifetime. The trick for now, was to allocate a
device resource managed buffer which is then returned. This will only
work if we have an actual device.
Change it, so that the caller of of_get_mac_address() has to supply a
buffer where the MAC address is written to. Unfortunately, this will
touch all drivers which use the of_get_mac_address().
Usually the code looks like:
const char *addr;
addr = of_get_mac_address(np);
if (!IS_ERR(addr))
ether_addr_copy(ndev->dev_addr, addr);
This can then be simply rewritten as:
of_get_mac_address(np, ndev->dev_addr);
Sometimes is_valid_ether_addr() is used to test the MAC address.
of_get_mac_address() already makes sure, it just returns a valid MAC
address. Thus we can just test its return code. But we have to be
careful if there are still other sources for the MAC address before the
of_get_mac_address(). In this case we have to keep the
is_valid_ether_addr() call.
The following coccinelle patch was used to convert common cases to the
new style. Afterwards, I've manually gone over the drivers and fixed the
return code variable: either used a new one or if one was already
available use that. Mansour Moufid, thanks for that coccinelle patch!
<spml>
@a@
identifier x;
expression y, z;
@@
- x = of_get_mac_address(y);
+ x = of_get_mac_address(y, z);
<...
- ether_addr_copy(z, x);
...>
@@
identifier a.x;
@@
- if (<+... x ...+>) {}
@@
identifier a.x;
@@
if (<+... x ...+>) {
...
}
- else {}
@@
identifier a.x;
expression e;
@@
- if (<+... x ...+>@e)
- {}
- else
+ if (!(e))
{...}
@@
expression x, y, z;
@@
- x = of_get_mac_address(y, z);
+ of_get_mac_address(y, z);
... when != x
</spml>
All drivers, except drivers/net/ethernet/aeroflex/greth.c, were
compile-time tested.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add missing fault exit label in unsafe_copy_from_user() in order to
avoid following build failure with CONFIG_SPE
CC arch/powerpc/kernel/signal_32.o
arch/powerpc/kernel/signal_32.c: In function 'restore_user_regs':
arch/powerpc/kernel/signal_32.c:565:36: error: macro "unsafe_copy_from_user" requires 4 arguments, but only 3 given
565 | ELF_NEVRREG * sizeof(u32));
| ^
In file included from ./include/linux/uaccess.h:11,
from ./include/linux/sched/task.h:11,
from ./include/linux/sched/signal.h:9,
from ./include/linux/rcuwait.h:6,
from ./include/linux/percpu-rwsem.h:7,
from ./include/linux/fs.h:33,
from ./include/linux/huge_mm.h:8,
from ./include/linux/mm.h:707,
from arch/powerpc/kernel/signal_32.c:17:
./arch/powerpc/include/asm/uaccess.h:428: note: macro "unsafe_copy_from_user" defined here
428 | #define unsafe_copy_from_user(d, s, l, e) \
|
arch/powerpc/kernel/signal_32.c:564:3: error: 'unsafe_copy_from_user' undeclared (first use in this function); did you mean 'raw_copy_from_user'?
564 | unsafe_copy_from_user(current->thread.evr, &sr->mc_vregs,
| ^~~~~~~~~~~~~~~~~~~~~
| raw_copy_from_user
arch/powerpc/kernel/signal_32.c:564:3: note: each undeclared identifier is reported only once for each function it appears in
make[3]: *** [arch/powerpc/kernel/signal_32.o] Error 1
Fixes: 627b72bee8 ("powerpc/signal32: Convert restore_[tm]_user_regs() to user access block")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/aad2cb1801a3cc99bc27081022925b9fc18a0dfb.1618159169.git.christophe.leroy@csgroup.eu
Rather than clear the HV bit from the MSR at guest entry, make it clear
that the hypervisor does not allow the guest to set the bit.
The HV clear is kept in guest entry for now, but a future patch will
warn if it is set.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210412014845.1517916-13-npiggin@gmail.com
Rather than add the ME bit to the MSR at guest entry, make it clear
that the hypervisor does not allow the guest to clear the bit.
The ME set is kept in guest entry for now, but a future patch will
warn if it's not present.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210412014845.1517916-12-npiggin@gmail.com
The code being executed in KVM_GUEST_MODE_SKIP is hypervisor code with
MSR[IR]=0, so the faults of concern are the d-side ones caused by access
to guest context by the hypervisor.
Instruction breakpoint interrupts are not a concern here. It's unlikely
any good would come of causing breaks in this code, but skipping the
instruction that caused it won't help matters (e.g., skip the mtmsr that
sets MSR[DR]=0 or clears KVM_GUEST_MODE_SKIP).
[Paul notes: "the 0x1300 interrupt was dropped from the architecture a
long time ago and is not generated by P7, P8, P9 or P10." So add a
comment about this in the handler code while we're here. ]
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210412014845.1517916-11-npiggin@gmail.com
Cell does not support KVM.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210412014845.1517916-10-npiggin@gmail.com
This config option causes the warning in init_default_hcalls to fire
because the TCE handlers are in the default hcall list but not
implemented.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210412014845.1517916-9-npiggin@gmail.com
The va argument is not used in the function or set by its asm caller,
so remove it to be safe.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210412014845.1517916-8-npiggin@gmail.com
This SPR is set to 0 twice when exiting the guest.
Suggested-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210412014845.1517916-7-npiggin@gmail.com
Prevent radix guests setting LPCR[TC]. This bit only applies to hash
partitions.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210412014845.1517916-6-npiggin@gmail.com
These are already disallowed by H_SET_MODE from the guest, also disallow
these by updating LPCR directly.
AIL modes can affect the host interrupt behaviour while the guest LPCR
value is set, so filter it here too.
Suggested-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210412014845.1517916-5-npiggin@gmail.com
Guest LPCR depends on hardware type, and future changes will add
restrictions based on errata and guest MMU mode. Move this logic
to a common function and use it for the cases where the guest
wants to update its LPCR (or the LPCR of a nested guest).
This also adds a warning in other places that set or update LPCR
if we try to set something that would have been disallowed by
the filter, as a sanity check.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210412014845.1517916-4-npiggin@gmail.com
This will get a bit more complicated in future patches. Move it
into the helper function.
This change allows the L1 hypervisor to determine some of the LPCR
bits that the L0 is using to run it, which could be a privilege
violation (LPCR is HV-privileged), although the same problem exists
now for HFSCR for example. Discussion of the HV privilege issue is
ongoing and can be resolved with a later change.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210412014845.1517916-3-npiggin@gmail.com
The host CTRL (runlatch) value is not restored after guest exit. The
host CTRL should always be 1 except in CPU idle code, so this can result
in the host running with runlatch clear, and potentially switching to
a different vCPU which then runs with runlatch clear as well.
This has little effect on P9 machines, CTRL is only responsible for some
PMU counter logic in the host and so other than corner cases of software
relying on that, or explicitly reading the runlatch value (Linux does
not appear to be affected but it's possible non-Linux guests could be),
there should be no execution correctness problem, though it could be
used as a covert channel between guests.
There may be microcontrollers, firmware or monitoring tools that sample
the runlatch value out-of-band, however since the register is writable
by guests, these values would (should) not be relied upon for correct
operation of the host, so suboptimal performance or incorrect reporting
should be the worst problem.
Fixes: 95a6432ce9 ("KVM: PPC: Book3S HV: Streamlined guest entry/exit path on P9 for radix guests")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210412014845.1517916-2-npiggin@gmail.com
For unknown reason, old commit d27dfd388715 ("Import pre2.0.8")
changed 'ptrdiff_t' from 'int' to 'long'.
GCC expects it as 'int' really, and this leads to the following
warning when building KFENCE:
CC mm/kfence/report.o
In file included from ./include/linux/printk.h:7,
from ./include/linux/kernel.h:16,
from mm/kfence/report.c:10:
mm/kfence/report.c: In function 'kfence_report_error':
./include/linux/kern_levels.h:5:18: warning: format '%td' expects argument of type 'ptrdiff_t', but argument 6 has type 'long int' [-Wformat=]
5 | #define KERN_SOH "\001" /* ASCII Start Of Header */
| ^~~~~~
./include/linux/kern_levels.h:11:18: note: in expansion of macro 'KERN_SOH'
11 | #define KERN_ERR KERN_SOH "3" /* error conditions */
| ^~~~~~~~
./include/linux/printk.h:343:9: note: in expansion of macro 'KERN_ERR'
343 | printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
| ^~~~~~~~
mm/kfence/report.c:213:3: note: in expansion of macro 'pr_err'
213 | pr_err("Out-of-bounds %s at 0x%p (%luB %s of kfence-#%td):\n",
| ^~~~~~
<asm-generic/uapi/posix-types.h> defines it as 'int', and
defines 'size_t' and 'ssize_t' exactly as powerpc do, so
remove the powerpc specific definitions and fallback on
generic ones.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e43d133bf52fa19e577f64f3a3a38cedc570377d.1617616601.git.christophe.leroy@csgroup.eu
When neither CONFIG_PCI nor CONFIG_IBMVIO is set/enabled, iommu.c has a
build error. The fault injection code is not useful in that kernel config,
so make the FAIL_IOMMU option depend on PCI || IBMVIO.
Prevents this build error (warning escalated to error):
../arch/powerpc/kernel/iommu.c:178:30: error: 'fail_iommu_bus_notifier' defined but not used [-Werror=unused-variable]
178 | static struct notifier_block fail_iommu_bus_notifier = {
Fixes: d6b9a81b2a ("powerpc: IOMMU fault injection")
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210404192623.10697-1-rdunlap@infradead.org
Eliminate the following coccicheck warning:
./arch/powerpc/platforms/pseries/lpar.c:1633:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1617672785-81372-1-git-send-email-yang.lee@linux.alibaba.com
There is no need for this to be in asm, use the new intrrupt entry wrapper.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210406025508.821718-1-npiggin@gmail.com
The power PMU group constraints includes check for EBB events to make
sure all events in a group must agree on EBB. This will prevent
scheduling EBB and non-EBB events together. But in the existing check,
settings for constraint mask and value is interchanged. Patch fixes the
same.
Before the patch, PMU selftest "cpu_event_pinned_vs_ebb_test" fails with
below in dmesg logs. This happens because EBB event gets enabled along
with a non-EBB cpu event.
[35600.453346] cpu_event_pinne[41326]: illegal instruction (4)
at 10004a18 nip 10004a18 lr 100049f8 code 1 in
cpu_event_pinned_vs_ebb_test[10000000+10000]
Test results after the patch:
$ ./pmu/ebb/cpu_event_pinned_vs_ebb_test
test: cpu_event_pinned_vs_ebb
tags: git_version:v5.12-rc5-93-gf28c3125acd3-dirty
Binding to cpu 8
EBB Handler is at 0x100050c8
read error on event 0x7fffe6bd4040!
PM_RUN_INST_CMPL: result 9872 running/enabled 37930432
success: cpu_event_pinned_vs_ebb
This bug was hidden by other logic until commit 1908dc9117 (perf:
Tweak perf_event_attr::exclusive semantics).
Fixes: 4df4899911 ("powerpc/perf: Add power8 EBB support")
Reported-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Mention commit 1908dc9117]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1617725761-1464-1-git-send-email-atrajeev@linux.vnet.ibm.com
Let the memory removed from the linear mapping to be used for the trace
buffers be mmaped. This is a useful way of providing cache-inhibited
memory for the alignment_handler selftest.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
[mpe: make memtrace_mmap() static as noticed by lkp@intel.com]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210225032108.1458352-1-jniethe5@gmail.com
As best as I can tell the ".machine" directive in trampoline_64.S is no
longer, or never was, necessary.
It was added in commit 0d97631392 ("powerpc: Add purgatory for
kexec_file_load() implementation."), which created the file based on
the kexec-tools purgatory. It may be/have-been necessary in the
kexec-tools version, but we have a completely different build system,
and we already pass the desired CPU flags, eg:
gcc ... -m64 -Wl,-a64 -mabi=elfv2 -Wa,-maltivec -Wa,-mpower4 -Wa,-many
... arch/powerpc/purgatory/trampoline_64.S
So drop the ".machine" directive and rely on the assembler flags.
Reported-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Link: https://lore.kernel.org/r/20210315034159.315675-1-mpe@ellerman.id.au
When the original spectre/meltdown mitigations were merged we put them
in setup_64.c for lack of a better place.
Since then we created security.c for some of the other mitigation
related code. But it should all be in there.
This sort of code movement can cause trouble for backports, but
hopefully this code is relatively stable these days (famous last words).
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210326101201.1973552-1-mpe@ellerman.id.au
We have now fixed the known bugs in STRICT_KERNEL_RWX for Book3S
64-bit Hash and Radix MMUs, see preceding commits, so allow the
option to be selected again.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331003845.216246-6-mpe@ellerman.id.au
When we enabled STRICT_KERNEL_RWX we received some reports of boot
failures when using the Hash MMU and running under phyp. The crashes
are intermittent, and often exhibit as a completely unresponsive
system, or possibly an oops.
One example, which was caught in xmon:
[ 14.068327][ T1] devtmpfs: mounted
[ 14.069302][ T1] Freeing unused kernel memory: 5568K
[ 14.142060][ T347] BUG: Unable to handle kernel instruction fetch
[ 14.142063][ T1] Run /sbin/init as init process
[ 14.142074][ T347] Faulting instruction address: 0xc000000000004400
cpu 0x2: Vector: 400 (Instruction Access) at [c00000000c7475e0]
pc: c000000000004400: exc_virt_0x4400_instruction_access+0x0/0x80
lr: c0000000001862d4: update_rq_clock+0x44/0x110
sp: c00000000c747880
msr: 8000000040001031
current = 0xc00000000c60d380
paca = 0xc00000001ec9de80 irqmask: 0x03 irq_happened: 0x01
pid = 347, comm = kworker/2:1
...
enter ? for help
[c00000000c747880] c0000000001862d4 update_rq_clock+0x44/0x110 (unreliable)
[c00000000c7478f0] c000000000198794 update_blocked_averages+0xb4/0x6d0
[c00000000c7479f0] c000000000198e40 update_nohz_stats+0x90/0xd0
[c00000000c747a20] c0000000001a13b4 _nohz_idle_balance+0x164/0x390
[c00000000c747b10] c0000000001a1af8 newidle_balance+0x478/0x610
[c00000000c747be0] c0000000001a1d48 pick_next_task_fair+0x58/0x480
[c00000000c747c40] c000000000eaab5c __schedule+0x12c/0x950
[c00000000c747cd0] c000000000eab3e8 schedule+0x68/0x120
[c00000000c747d00] c00000000016b730 worker_thread+0x130/0x640
[c00000000c747da0] c000000000174d50 kthread+0x1a0/0x1b0
[c00000000c747e10] c00000000000e0f0 ret_from_kernel_thread+0x5c/0x6c
This shows that CPU 2, which was idle, woke up and then appears to
randomly take an instruction fault on a completely valid area of
kernel text.
The cause turns out to be the call to hash__mark_rodata_ro(), late in
boot. Due to the way we layout text and rodata, that function actually
changes the permissions for all of text and rodata to read-only plus
execute.
To do the permission change we use a hypervisor call, H_PROTECT. On
phyp that appears to be implemented by briefly removing the mapping of
the kernel text, before putting it back with the updated permissions.
If any other CPU is executing during that window, it will see spurious
faults on the kernel text and/or data, leading to crashes.
To fix it we use stop machine to collect all other CPUs, and then have
them drop into real mode (MMU off), while we change the mapping. That
way they are unaffected by the mapping temporarily disappearing.
We don't see this bug on KVM because KVM always use VPM=1, where
faults are directed to the hypervisor, and the fault will be
serialised vs the h_protect() by HPTE_V_HVLOCK.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331003845.216246-5-mpe@ellerman.id.au
Pull the loop calling hpte_updateboltedpp() out of
hash__change_memory_range() into a helper function. We need it to be a
separate function for the next patch.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331003845.216246-4-mpe@ellerman.id.au
In hash__mark_rodata_ro() we pass the raw PP_RXXX value to
hash__change_memory_range(). That has the effect of setting the key to
zero, because PP_RXXX contains no key value.
Fix it by using htab_convert_pte_flags(), which knows how to convert a
pgprot into a pp value, including the key.
Fixes: d94b827e89 ("powerpc/book3s64/kuap: Use Key 3 for kernel mapping with hash translation")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Link: https://lore.kernel.org/r/20210331003845.216246-3-mpe@ellerman.id.au
The flags argument to plpar_pte_protect() (aka. H_PROTECT), includes
the key in bits 9-13, but currently we always set those bits to zero.
In the past that hasn't been a problem because we always used key 0
for the kernel, and updateboltedpp() is only used for kernel mappings.
However since commit d94b827e89 ("powerpc/book3s64/kuap: Use Key 3
for kernel mapping with hash translation") we are now inadvertently
changing the key (to zero) when we call plpar_pte_protect().
That hasn't broken anything because updateboltedpp() is only used for
STRICT_KERNEL_RWX, which is currently disabled on 64s due to other
bugs.
But we want to fix that, so first we need to pass the key correctly to
plpar_pte_protect(). We can't pass our newpp value directly in, we
have to convert it into the form expected by the hcall.
The hcall we're using here is H_PROTECT, which is specified in section
14.5.4.1.6 of LoPAPR v1.1.
It takes a `flags` parameter, and the description for flags says:
* flags: AVPN, pp0, pp1, pp2, key0-key4, n, and for the CMO
option: CMO Option flags as defined in Table 189‚
If you then go to the start of the parent section, 14.5.4.1, on page
405, it says:
Register Linkage (For hcall() tokens 0x04 - 0x18)
* On Call
* R3 function call token
* R4 flags (see Table 178‚ “Page Frame Table Access flags field
definition‚” on page 401)
Then you have to go to section 14.5.3, and on page 394 there is a list
of hcalls and their tokens (table 176), and there you can see that
H_PROTECT == 0x18.
Finally you can look at table 178, on page 401, where it specifies the
layout of the bits for the key:
Bit Function
-----------------
50-54 | key0-key4
Those are big-endian bit numbers, converting to normal bit numbers you
get bits 9-13, or 0x3e00.
In the kernel we have:
#define HPTE_R_KEY_HI ASM_CONST(0x3000000000000000)
#define HPTE_R_KEY_LO ASM_CONST(0x0000000000000e00)
So the LO bits of newpp are already in the right place, and the HI
bits need to be shifted down by 48.
Fixes: d94b827e89 ("powerpc/book3s64/kuap: Use Key 3 for kernel mapping with hash translation")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331003845.216246-2-mpe@ellerman.id.au
In the past we had a fallback definition for _PAGE_KERNEL_ROX, but we
removed that in commit d82fd29c5a ("powerpc/mm: Distribute platform
specific PAGE and PMD flags and definitions") and added definitions
for each MMU family.
However we missed adding a definition for 64s, which was not really a
bug because it's currently not used.
But we'd like to use PAGE_KERNEL_ROX in a future patch so add a
definition now.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331003845.216246-1-mpe@ellerman.id.au
When adding a PTE a ptesync is needed to order the update of the PTE
with subsequent accesses otherwise a spurious fault may be raised.
radix__set_pte_at() does not do this for performance gains. For
non-kernel memory this is not an issue as any faults of this kind are
corrected by the page fault handler. For kernel memory these faults
are not handled. The current solution is that there is a ptesync in
flush_cache_vmap() which should be called when mapping from the
vmalloc region.
However, map_kernel_page() does not call flush_cache_vmap(). This is
troublesome in particular for code patching with Strict RWX on radix.
In do_patch_instruction() the page frame that contains the instruction
to be patched is mapped and then immediately patched. With no ordering
or synchronization between setting up the PTE and writing to the page
it is possible for faults.
As the code patching is done using __put_user_asm_goto() the resulting
fault is obscured - but using a normal store instead it can be seen:
BUG: Unable to handle kernel data access on write at 0xc008000008f24a3c
Faulting instruction address: 0xc00000000008bd74
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV
Modules linked in: nop_module(PO+) [last unloaded: nop_module]
CPU: 4 PID: 757 Comm: sh Tainted: P O 5.10.0-rc5-01361-ge3c1b78c8440-dirty #43
NIP: c00000000008bd74 LR: c00000000008bd50 CTR: c000000000025810
REGS: c000000016f634a0 TRAP: 0300 Tainted: P O (5.10.0-rc5-01361-ge3c1b78c8440-dirty)
MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 44002884 XER: 00000000
CFAR: c00000000007c68c DAR: c008000008f24a3c DSISR: 42000000 IRQMASK: 1
This results in the kind of issue reported here:
https://lore.kernel.org/linuxppc-dev/15AC5B0E-A221-4B8C-9039-FA96B8EF7C88@lca.pw/
Chris Riedl suggested a reliable way to reproduce the issue:
$ mount -t debugfs none /sys/kernel/debug
$ (while true; do echo function > /sys/kernel/debug/tracing/current_tracer ; echo nop > /sys/kernel/debug/tracing/current_tracer ; done) &
Turning ftrace on and off does a large amount of code patching which
in usually less then 5min will crash giving a trace like:
ftrace-powerpc: (____ptrval____): replaced (4b473b11) != old (60000000)
------------[ ftrace bug ]------------
ftrace failed to modify
[<c000000000bf8e5c>] napi_busy_loop+0xc/0x390
actual: 11:3b:47:4b
Setting ftrace call site to call ftrace function
ftrace record flags: 80000001
(1)
expected tramp: c00000000006c96c
------------[ cut here ]------------
WARNING: CPU: 4 PID: 809 at kernel/trace/ftrace.c:2065 ftrace_bug+0x28c/0x2e8
Modules linked in: nop_module(PO-) [last unloaded: nop_module]
CPU: 4 PID: 809 Comm: sh Tainted: P O 5.10.0-rc5-01360-gf878ccaf250a #1
NIP: c00000000024f334 LR: c00000000024f330 CTR: c0000000001a5af0
REGS: c000000004c8b760 TRAP: 0700 Tainted: P O (5.10.0-rc5-01360-gf878ccaf250a)
MSR: 900000000282b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 28008848 XER: 20040000
CFAR: c0000000001a9c98 IRQMASK: 0
GPR00: c00000000024f330 c000000004c8b9f0 c000000002770600 0000000000000022
GPR04: 00000000ffff7fff c000000004c8b6d0 0000000000000027 c0000007fe9bcdd8
GPR08: 0000000000000023 ffffffffffffffd8 0000000000000027 c000000002613118
GPR12: 0000000000008000 c0000007fffdca00 0000000000000000 0000000000000000
GPR16: 0000000023ec37c5 0000000000000000 0000000000000000 0000000000000008
GPR20: c000000004c8bc90 c0000000027a2d20 c000000004c8bcd0 c000000002612fe8
GPR24: 0000000000000038 0000000000000030 0000000000000028 0000000000000020
GPR28: c000000000ff1b68 c000000000bf8e5c c00000000312f700 c000000000fbb9b0
NIP ftrace_bug+0x28c/0x2e8
LR ftrace_bug+0x288/0x2e8
Call Trace:
ftrace_bug+0x288/0x2e8 (unreliable)
ftrace_modify_all_code+0x168/0x210
arch_ftrace_update_code+0x18/0x30
ftrace_run_update_code+0x44/0xc0
ftrace_startup+0xf8/0x1c0
register_ftrace_function+0x4c/0xc0
function_trace_init+0x80/0xb0
tracing_set_tracer+0x2a4/0x4f0
tracing_set_trace_write+0xd4/0x130
vfs_write+0xf0/0x330
ksys_write+0x84/0x140
system_call_exception+0x14c/0x230
system_call_common+0xf0/0x27c
To fix this when updating kernel memory PTEs using ptesync.
Fixes: f1cb8f9beb ("powerpc/64s/radix: avoid ptesync after set_pte and ptep_set_access_flags")
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Tidy up change log slightly]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210208032957.1232102-1-jniethe5@gmail.com
Various spelling/typo fixes.
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add a fsl_pamu_configure_l1_stash API that qman_portal can call directly
instead of indirecting through the iommu attr API.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-8-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Convert powerpc to relative jump labels.
Before the patch, pseries_defconfig vmlinux.o has:
9074 __jump_table 0003f2a0 0000000000000000 0000000000000000 01321fa8 2**0
With the patch, the same config gets:
9074 __jump_table 0002a0e0 0000000000000000 0000000000000000 01321fb4 2**0
Size is 258720 without the patch, 172256 with the patch.
That's a 33% size reduction.
Largely copied from commit c296146c05 ("arm64/kernel: jump_label:
Switch to relative references")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/828348da7868eda953ce023994404dfc49603b64.1616514473.git.christophe.leroy@csgroup.eu
Implement Extended Berkeley Packet Filter on Powerpc 32
Test result with test_bpf module:
test_bpf: Summary: 378 PASSED, 0 FAILED, [354/366 JIT'ed]
Registers mapping:
[BPF_REG_0] = r11-r12
/* function arguments */
[BPF_REG_1] = r3-r4
[BPF_REG_2] = r5-r6
[BPF_REG_3] = r7-r8
[BPF_REG_4] = r9-r10
[BPF_REG_5] = r21-r22 (Args 9 and 10 come in via the stack)
/* non volatile registers */
[BPF_REG_6] = r23-r24
[BPF_REG_7] = r25-r26
[BPF_REG_8] = r27-r28
[BPF_REG_9] = r29-r30
/* frame pointer aka BPF_REG_10 */
[BPF_REG_FP] = r17-r18
/* eBPF jit internal registers */
[BPF_REG_AX] = r19-r20
[TMP_REG] = r31
As PPC32 doesn't have a redzone in the stack, a stack frame must always
be set in order to host at least the tail count counter.
The stack frame remains for tail calls, it is set by the first callee
and freed by the last callee.
r0 is used as temporary register as much as possible. It is referenced
directly in the code in order to avoid misusing it, because some
instructions interpret it as value 0 instead of register r0
(ex: addi, addis, stw, lwz, ...)
The following operations are not implemented:
case BPF_ALU64 | BPF_DIV | BPF_X: /* dst /= src */
case BPF_ALU64 | BPF_MOD | BPF_X: /* dst %= src */
case BPF_STX | BPF_XADD | BPF_DW: /* *(u64 *)(dst + off) += src */
The following operations are only implemented for power of two constants:
case BPF_ALU64 | BPF_MOD | BPF_K: /* dst %= imm */
case BPF_ALU64 | BPF_DIV | BPF_K: /* dst /= imm */
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/61d8b149176ddf99e7d5cef0b6dc1598583ca202.1616430991.git.christophe.leroy@csgroup.eu
The following opcodes will be needed for the implementation
of eBPF for PPC32. Add them in asm/ppc-opcode.h
PPC_RAW_ADDE
PPC_RAW_ADDZE
PPC_RAW_ADDME
PPC_RAW_MFLR
PPC_RAW_ADDIC
PPC_RAW_ADDIC_DOT
PPC_RAW_SUBFC
PPC_RAW_SUBFE
PPC_RAW_SUBFIC
PPC_RAW_SUBFZE
PPC_RAW_ANDIS
PPC_RAW_NOR
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f7bd573a368edd78006f8a5af508c726e7ce1ed2.1616430991.git.christophe.leroy@csgroup.eu
In preparation of using user_access_begin/end in restore_user_regs(),
move the access_ok() inside the function.
It makes no difference as the behaviour on a failed access_ok() is
the same as on failed restore_user_regs().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c106eb2f37c3040f1fd38b40e50c670feb7cb835.1616151715.git.christophe.leroy@csgroup.eu
In the same spirit as commit f1cf4f93de ("powerpc/signal32: Remove
ifdefery in middle of if/else")
MSR_TM_ACTIVE() is always defined and returns always 0 when
CONFIG_PPC_TRANSACTIONAL_MEM is not selected, so the awful
ifdefery in the middle of an if/else can be removed.
Make 'msr_hi' a 'long long' to avoid build failure on PPC32
due to the 32 bits left shift.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a4b48b2f0be1ef13fc8e57452b7f8350da28d521.1616151715.git.christophe.leroy@csgroup.eu
Convention is to prefix functions with __unsafe_ instead of
suffixing it with _unsafe.
Rename save_user_regs_unsafe() and save_general_regs_unsafe()
accordingly, that is respectively __unsafe_save_general_regs() and
__unsafe_save_user_regs().
Suggested-by: Christopher M. Riedl <cmr@codefail.de>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8cef43607e5b35a7fd0829dec812d88beb570df2.1616151715.git.christophe.leroy@csgroup.eu
Similarly to commit 5cf773fc8f37 ("powerpc/uaccess: Also perform
64 bits copies in unsafe_copy_to_user() on ppc32")
ppc32 has an efficiant 64 bits unsafe_get_user(), so also use it in
order to unroll loops more.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/308e65d9237a14e8c0e3b22919fcf0b5e5592608.1616151715.git.christophe.leroy@csgroup.eu
clang 11 and future GCC are supporting asm goto with outputs.
Use it to implement get_user in order to get better generated code.
Note that clang requires to set x in the default branch of
__get_user_size_goto() otherwise is compliant about x not being
initialised :puzzled:
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/403745b5aaa1b315bb4e8e46c1ba949e77eecec0.1615398265.git.christophe.leroy@csgroup.eu
Make get_user() do the access_ok() check then call __get_user().
Make put_user() do the access_ok() check then call __put_user().
Then embed __get_user_size() and __put_user_size() in
__get_user() and __put_user().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/eebc554f6a81f570c46ea3551000ff5b886e4faa.1615398265.git.christophe.leroy@csgroup.eu
__get_user_bad() and __put_user_bad() are functions that are
declared but not defined, in order to make the link fail in
case they are called.
Nowadays, we have BUILD_BUG() and BUILD_BUG_ON() for that, and
they have the advantage to break the build earlier as it breaks
it at compile time instead of link time.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d7d839e994f49fae4ff7b70fac72bd951272436b.1615398265.git.christophe.leroy@csgroup.eu
Commit d02f6b7dab ("powerpc/uaccess: Evaluate macro arguments once,
before user access is allowed") changed the __chk_user_ptr()
argument from the passed ptr pointer to the locally
declared __gu_addr. But __gu_addr is locally defined as __user
so the check is pointless.
During kernel build __chk_user_ptr() voids and is only evaluated
during sparse checks so it should have been armless to leave the
original pointer check there.
Nevertheless, this check is indeed redundant with the assignment
above which casts the ptr pointer to the local __user __gu_addr.
In case of mismatch, sparse will detect it there, so the
__check_user_ptr() is not needed anywhere else than in access_ok().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/69f17d75046733b891ab2e668dbf464787cdf598.1615398265.git.christophe.leroy@csgroup.eu
__unsafe_put_user_goto() is just an intermediate layer to
__put_user_size_goto() without added value other than doing
the __user pointer type checking.
Do the __user pointer type checking in __put_user_size_goto()
and remove __unsafe_put_user_goto().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b6552149209aebd887a6977272b06a41256bdb9f.1615398265.git.christophe.leroy@csgroup.eu
Commit 6bfd93c32a ("powerpc: Fix incorrect might_sleep in
__get_user/__put_user on kernel addresses") added a check to not call
might_sleep() on kernel addresses. This was to enable the use of
__get_user() in the alignment exception handler for any address.
Then commit 95156f0051 ("lockdep, mm: fix might_fault() annotation")
added a check of the address space in might_fault(), based on
set_fs() logic. But this didn't solve the powerpc alignment exception
case as it didn't call set_fs(KERNEL_DS).
Nowadays, set_fs() is gone, previous patch fixed the alignment
exception handler and __get_user/__put_user are not supposed to be
used anymore to read kernel memory.
Therefore the is_kernel_addr() check has become useless and can be
removed.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e0a980a4dc7a2551183dd5cb30f46eafdbee390c.1615398265.git.christophe.leroy@csgroup.eu
In the old days, when we didn't have kernel userspace access
protection and had set_fs(), it was wise to use __get_user()
and friends to read kernel memory.
Nowadays, get_user() is granting userspace access and is exclusively
for userspace access.
In alignment exception handler, use probe_kernel_read_inst()
instead of __get_user_instr() for reading instructions in kernel.
This will allow to remove the is_kernel_addr() check in
__get/put_user() in a following patch.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d9ecbce00178484e66ca7adec2ff210058037704.1615398265.git.christophe.leroy@csgroup.eu
Powerpc is the only architecture having _inatomic variants of
__get_user() and __put_user() accessors. They were introduced
by commit e68c825bb0 ("[POWERPC] Add inatomic versions of __get_user
and __put_user").
Those variants expand to the _nosleep macros instead of expanding
to the _nocheck macros. The only difference between the _nocheck
and the _nosleep macros is the call to might_fault().
Since commit 662bbcb274 ("mm, sched: Allow uaccess in atomic with
pagefault_disable()"), __get/put_user() can be used in atomic parts
of the code, therefore __get/put_user_inatomic() have become useless.
Remove __get_user_inatomic() and __put_user_inatomic().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1e5c895669e8d54a7810b62dc61eb111f33c2c37.1615398265.git.christophe.leroy@csgroup.eu
This patch converts emulate_spe() to using user_access_begin
logic.
Since commit 662bbcb274 ("mm, sched: Allow uaccess in atomic with
pagefault_disable()"), might_fault() doesn't fire when called from
sections where pagefaults are disabled, which must be the case
when using _inatomic variants of __get_user and __put_user. So
the might_fault() in user_access_begin() is not a problem.
There was a verification of user_mode() together with the access_ok(),
but there is a second verification of user_mode() just after, that
leads to immediate return. The access_ok() is now part of the
user_access_begin which is called after that other user_mode()
verification, so no need to check user_mode() again.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c95a648fdf75992c9d88f3c73cc23e7537fcf2ad.1615555354.git.christophe.leroy@csgroup.eu
Commit bce74491c3 ("powerpc/vdso: fix unnecessary rebuilds of
vgettimeofday.o") moved vdso32_wrapper.o and vdso64_wrapper.o out
of arch/powerpc/kernel/vdso[32/64]/ and removed the dependencies in
the Makefile. This leads to the wrappers not being re-build hence the
kernel embedding the old vdso library.
Add back missing dependencies to ensure vdso32_wrapper.o and vdso64_wrapper.o
are rebuilt when vdso32.so.dbg and vdso64.so.dbg are changed.
Fixes: bce74491c3 ("powerpc/vdso: fix unnecessary rebuilds of vgettimeofday.o")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8bb015bc98c51d8ced581415b7e3d157e18da7c9.1617181918.git.christophe.leroy@csgroup.eu
PPC32 encounters a KUAP fault when trying to handle a signal with
VDSO unmapped.
Kernel attempted to read user page (7fc07ec0) - exploit attempt? (uid: 0)
BUG: Unable to handle kernel data access on read at 0x7fc07ec0
Faulting instruction address: 0xc00111d4
Oops: Kernel access of bad area, sig: 11 [#1]
BE PAGE_SIZE=16K PREEMPT CMPC885
CPU: 0 PID: 353 Comm: sigreturn_vdso Not tainted 5.12.0-rc4-s3k-dev-01553-gb30c310ea220 #4814
NIP: c00111d4 LR: c0005a28 CTR: 00000000
REGS: cadb3dd0 TRAP: 0300 Not tainted (5.12.0-rc4-s3k-dev-01553-gb30c310ea220)
MSR: 00009032 <EE,ME,IR,DR,RI> CR: 48000884 XER: 20000000
DAR: 7fc07ec0 DSISR: 88000000
GPR00: c0007788 cadb3e90 c28d4a40 7fc07ec0 7fc07ed0 000004e0 7fc07ce0 00000000
GPR08: 00000001 00000001 7fc07ec0 00000000 28000282 1001b828 100a0920 00000000
GPR16: 100cac0c 100b0000 105c43a4 105c5685 100d0000 100d0000 100d0000 100b2e9e
GPR24: ffffffff 105c43c8 00000000 7fc07ec8 cadb3f40 cadb3ec8 c28d4a40 00000000
NIP [c00111d4] flush_icache_range+0x90/0xb4
LR [c0005a28] handle_signal32+0x1bc/0x1c4
Call Trace:
[cadb3e90] [100d0000] 0x100d0000 (unreliable)
[cadb3ec0] [c0007788] do_notify_resume+0x260/0x314
[cadb3f20] [c000c764] syscall_exit_prepare+0x120/0x184
[cadb3f30] [c00100b4] ret_from_syscall+0xc/0x28
--- interrupt: c00 at 0xfe807f8
NIP: 0fe807f8 LR: 10001060 CTR: c0139378
REGS: cadb3f40 TRAP: 0c00 Not tainted (5.12.0-rc4-s3k-dev-01553-gb30c310ea220)
MSR: 0000d032 <EE,PR,ME,IR,DR,RI> CR: 28000482 XER: 20000000
GPR00: 00000025 7fc081c0 77bb1690 00000000 0000000a 28000482 00000001 0ff03a38
GPR08: 0000d032 00006de5 c28d4a40 00000009 88000482 1001b828 100a0920 00000000
GPR16: 100cac0c 100b0000 105c43a4 105c5685 100d0000 100d0000 100d0000 100b2e9e
GPR24: ffffffff 105c43c8 00000000 77ba7628 10002398 10010000 10002124 00024000
NIP [0fe807f8] 0xfe807f8
LR [10001060] 0x10001060
--- interrupt: c00
Instruction dump:
38630010 7c001fac 38630010 4200fff0 7c0004ac 4c00012c 4e800020 7c001fac
2c0a0000 38630010 4082ffcc 4bffffe4 <7c00186c> 2c070000 39430010 4082ff8c
---[ end trace 3973fb72b049cb06 ]---
This is because flush_icache_range() is called on user addresses.
The same problem was detected some time ago on PPC64. It was fixed by
enabling KUAP in commit 59bee45b97 ("powerpc/mm: Fix missing KUAP
disable in flush_coherent_icache()").
PPC32 doesn't use flush_coherent_icache() and fallbacks on
clean_dcache_range() and invalidate_icache_range().
We could fix it similarly by enabling user access in those functions,
but this is overkill for just flushing two instructions.
The two instructions are 8 bytes aligned, so a single dcbst/icbi is
enough to flush them. Do like __patch_instruction() and inline
a dcbst followed by an icbi just after the write of the instructions,
while user access is still allowed. The isync is not required because
rfi will be used to return to user.
icbi() is handled as a read so read-write user access is needed.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/bde9154e5351a5ac7bca3d59cdb5a5e8edacbb79.1617199569.git.christophe.leroy@csgroup.eu
This reverts commit 675bceb097 ("powerpc/mm: Remove DEBUG_VM_PGTABLE support on powerpc")
All the related issues are fixed as of commit:
f14312e1ed ("mm/debug_vm_pgtable: avoid doing memory allocation with pgtable_t mapped.")
Hence re-enable it.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210318034855.74513-1-aneesh.kumar@linux.ibm.com
The vio bus is a fake bus, which we use on pseries LPARs (guests) to
discover devices provided by the hypervisor. There's no need or sense
in creating the vio bus on bare metal systems.
Which is why commit 4336b93378 ("powerpc/pseries: Make vio and
ibmebus initcalls pseries specific") made the initialisation of the
vio bus only happen in LPARs.
However as a result of that commit we now see errors at boot on bare
metal systems:
Driver 'hvc_console' was unable to register with bus_type 'vio' because the bus was not initialized.
Driver 'tpm_ibmvtpm' was unable to register with bus_type 'vio' because the bus was not initialized.
This happens because those drivers are built-in, and are calling
vio_register_driver(). It in turn calls driver_register() with a
reference to vio_bus_type, but we haven't registered vio_bus_type with
the driver core.
Fix it by also guarding vio_register_driver() with a check to see if
we are on pseries.
Fixes: 4336b93378 ("powerpc/pseries: Make vio and ibmebus initcalls pseries specific")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Link: https://lore.kernel.org/r/20210316010938.525657-1-mpe@ellerman.id.au
When compiling the powerpc with the SMP disabled, it shows the issue:
arch/powerpc/kernel/watchdog.c: In function ‘watchdog_smp_panic’:
arch/powerpc/kernel/watchdog.c:177:4: error: implicit declaration of function ‘smp_send_nmi_ipi’; did you mean ‘smp_send_stop’? [-Werror=implicit-function-declaration]
177 | smp_send_nmi_ipi(c, wd_lockup_ipi, 1000000);
| ^~~~~~~~~~~~~~~~
| smp_send_stop
cc1: all warnings being treated as errors
make[2]: *** [scripts/Makefile.build:273: arch/powerpc/kernel/watchdog.o] Error 1
make[1]: *** [scripts/Makefile.build:534: arch/powerpc/kernel] Error 2
make: *** [Makefile:1980: arch/powerpc] Error 2
make: *** Waiting for unfinished jobs....
We found that powerpc used ipi to implement hardlockup watchdog, so the
HAVE_HARDLOCKUP_DETECTOR_ARCH should depend on the SMP.
Fixes: 2104180a53 ("powerpc/64s: implement arch-specific hardlockup watchdog")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Chen Huang <chenhuang5@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210327094900.938555-1-chenhuang5@huawei.com
One of the reasons that dlpar_cpu_offline can fail is when attempting to
offline the last online CPU of the kernel. This can be observed in a
pseries QEMU guest that has hotplugged CPUs. If the user offlines all
other CPUs of the guest, and a hotplugged CPU is now the last online
CPU, trying to reclaim it will fail.
The current error message in this situation returns rc with -EBUSY and a
generic explanation, e.g.:
pseries-hotplug-cpu: Failed to offline CPU PowerPC,POWER9, rc: -16
EBUSY can be caused by other conditions, such as cpu_hotplug_disable
being true. Throwing a more specific error message for this case,
instead of just "Failed to offline CPU", makes it clearer that the error
is in fact a known error situation instead of other generic/unknown
cause.
This patch adds a 'last online' check in dlpar_cpu_offline() to catch
the 'last online CPU' offline error, eturning a more informative error
message:
pseries-hotplug-cpu: Unable to remove last online CPU PowerPC,POWER9
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210323205056.52768-2-danielhb413@gmail.com
call_do_irq() and call_do_softirq() are simple enough to be
worth inlining.
Inlining them avoids an mflr/mtlr pair plus a save/reload on stack.
This is inspired from S390 arch. Several other arches do more or
less the same. The way sparc arch does seems odd thought.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210320122227.345427-1-mpe@ellerman.id.au
Sparse warns:
warning: symbol 'rfi_flush' was not declared.
warning: symbol 'entry_flush' was not declared.
warning: symbol 'uaccess_flush' was not declared.
Define 'entry_flush' and 'uaccess_flush' as static because they are
not referenced outside the file. Include asm/security_features.h in
which 'rfi_flush' is declared.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: He Ying <heying24@huawei.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210316041148.29694-1-heying24@huawei.com
arch/powerpc/kernel/iommu.c:76:2-16: WARNING: NULL check before some freeing functions is not needed.
NULL check before some freeing functions is not needed.
Based on checkpatch warning
"kfree(NULL) is safe this check is probably not required"
and kfreeaddr.cocci by Julia Lawall.
Generated by: scripts/coccinelle/free/ifnullfree.cocci
Fixes: 691602aab9 ("powerpc/iommu/debug: Add debugfs entries for IOMMU tables")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210318234441.GA63469@f8e20a472e81
With below two commits:
commit c91435d95c ("powerpc/book3s64/hash/kuep: Enable KUEP on hash")
commit b2ff33a10c ("powerpc/book3s64/hash/kuap: Enable kuap on hash")
the kernel now supports kuap/kuep with hash translation. Hence select the
Kconfig even when radix is disabled.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210318034829.72255-1-aneesh.kumar@linux.ibm.com
Hash faults use the trap vector to decide whether this is an
instruction or data fault. This should use the TRAP accessor
rather than open access regs->trap.
This won't cause a problem at the moment because 64s only uses
trap flags for system call interrupts (the norestart flag), but
that could change if any other trap flags get used in future.
Fixes: a4922f5442 ("powerpc/64s: move the hash fault handling logic to C")
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210316105205.407767-1-npiggin@gmail.com
In fault.c, #ifdef CONFIG_PPC_MEM_KEYS is not needed because all
functions are always defined, and arch_vma_access_permitted()
always returns true when CONFIG_PPC_MEM_KEYS is not defined so
access_pkey_error() will return false so bad_access_pkey()
will never be called.
Include linux/pkeys.h to get a definition of vma_pkeys() for
bad_access_pkey().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8038392f38d81f2ad169347efac29146f553b238.1615819955.git.christophe.leroy@csgroup.eu
Section mismatch in reference from the function .fsl_add_bridge() to
the function .init.text:.setup_pci_cmd()
fsl_add_bridge() is not __init, and can't be, and is the only caller
of setup_pci_cmd(). Fix it by making setup_pci_cmd() non-init.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210314093341.132986-1-mpe@ellerman.id.au
Section mismatch in reference from the function .smp_setup_pacas() to
the function .init.text:.allocate_paca()
The only caller of smp_setup_pacas() is setup_arch() which is __init,
so mark smp_setup_pacas() __init.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210314093333.132657-1-mpe@ellerman.id.au
lkp reported warnings in some configuration due to
update_current_thread_amr() being unused:
arch/powerpc/mm/book3s64/pkeys.c:284:20: error: unused function 'update_current_thread_amr'
static inline void update_current_thread_amr(u64 value)
Which is because it's only use is inside an ifdef. We could move it
inside the ifdef, but it's a single line function and only has one
caller, so just fold it in.
Similarly update_current_thread_iamr() is small and only called once,
so fold it in also.
Fixes: 48a8ab4eeb ("powerpc/book3s64/pkeys: Don't update SPRN_AMR when in kernel mode.")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210314093320.132331-1-mpe@ellerman.id.au
The build fails with CONFIG_PROC_FS=n:
arch/powerpc/kernel/eeh.c:1571:12: error: ‘proc_eeh_show’ defined but not used
1571 | static int proc_eeh_show(struct seq_file *m, void *v)
Wrap proc_eeh_show() in an ifdef to avoid it.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210314093300.131998-1-mpe@ellerman.id.au
fixed the following coccicheck:
./arch/powerpc/sysdev/xive/spapr.c:552:8-9: WARNING: return of 0/1 in
function 'xive_spapr_match' with return type bool
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1615793096-83758-1-git-send-email-yang.lee@linux.alibaba.com
Commit aac6a91fea ("powerpc/asm: Remove unused symbols in
asm-offsets.c") removed GPR15 to GPR31 but kept GPR14,
probably because it pops up in a couple of comments when doing
a grep.
However, it was never used either, so remove it as well.
Fixes: aac6a91fea ("powerpc/asm: Remove unused symbols in asm-offsets.c")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/9881c68fbca004f9ea18fc9473f630e11ccd6417.1615806071.git.christophe.leroy@csgroup.eu
Sparse reports the following problems:
arch/powerpc/math-emu/math.c:228:21: warning: Using plain integer as NULL pointer
arch/powerpc/math-emu/math.c:228:31: warning: Using plain integer as NULL pointer
arch/powerpc/math-emu/math.c:228:41: warning: Using plain integer as NULL pointer
arch/powerpc/math-emu/math.c:228:51: warning: Using plain integer as NULL pointer
arch/powerpc/math-emu/math.c:237:13: warning: incorrect type in initializer (different address spaces)
arch/powerpc/math-emu/math.c:237:13: expected unsigned int [noderef] __user *_gu_addr
arch/powerpc/math-emu/math.c:237:13: got unsigned int [usertype] *
arch/powerpc/math-emu/math.c:226:1: warning: symbol 'do_mathemu' was not declared. Should it be static?
Add missing __user qualifier when casting pointer used in get_user()
Use NULL instead of 0 to initialise opX local variables.
Add a prototype for do_mathemu() (Added in processor.h like sparc)
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e4d1aae7604d89c98a52dfd8ce8443462e595670.1615809591.git.christophe.leroy@csgroup.eu
In preparation of porting PPC32 to C syscall entry/exit,
create C version of kuap_save_and_lock() and kuap_user_restore() and
kuap_kernel_restore() and kuap_assert_locked() and
kuap_get_and_assert_locked() on 8xx.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/156a7c4b669d26785391422a5581a1d919544c9a.1615552867.git.christophe.leroy@csgroup.eu
In preparation of porting PPC32 to C syscall entry/exit,
create C version of kuap_save_and_lock() and kuap_user_restore() and
kuap_kernel_restore() and kuap_assert_locked() and
kuap_get_and_assert_locked() on book3s/32.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2be8fb729da4a0f9863b25e1b9d547174fcd5056.1615552867.git.christophe.leroy@csgroup.eu
In preparation of porting powerpc32 to C syscall entry/exit,
rename kuap_check_amr() and kuap_get_and_check_amr() as
kuap_assert_locked() and kuap_get_and_assert_locked(), and move in the
generic asm/kup.h the stub for when CONFIG_PPC_KUAP is not selected.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f82614d9b17b83abd739aa18fc08811815d0c2e3.1615552867.git.christophe.leroy@csgroup.eu
Save non volatile registers, XER, CTR, MSR and NIP in exception prolog.
Also assign proper value to r2 and r3 there.
For now, recalculate thread pointer in prepare_transfer_to_handler.
It will disappear once KUAP is ported to C.
And remove the comment which is now completely wrong.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/56f0cde9dd0362edf2ddba4d887552013eee7329.1615552867.git.christophe.leroy@csgroup.eu
Exception prologs all do the same at the end:
- Save trapno in stack
- Mark stack with exception marker
- Save r0
- Save r3 to r8
Refactor that into a COMMON_EXCEPTION_PROLOG_END macro.
At the same time use r1 instead of r11.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e1c45d2e895e0693c42d2a6840df1105a148efea.1615552867.git.christophe.leroy@csgroup.eu
In order to get more control in exception prolog, dismantle
all non standard exception macros, finishing with EXC_XFER_STD
and EXC_XFER_LITE and EXC_XFER_TEMPLATE.
Also remove transfer_to_handler_full and ret_from_except and
ret_from_except_full as they are not used anymore.
Last parameter of EXCEPTION() is now ignored, will be removed
in a later patch to avoid too much churn.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ca5795d04a220586b7037dbbbe6951dfa9e768eb.1615552867.git.christophe.leroy@csgroup.eu
Until now, non volatile registers were restored everytime they
were saved, ie using EXC_XFER_STD meant saving and restoring
them while EXC_XFER_LITE meant neither saving not restoring them.
Now that they are always saved, EXC_XFER_STD means to restore
them and EXC_XFER_LITE means to not restore them.
Most of the users of EXC_XFER_STD only need to retrieve the
non volatile registers. For them there is no need to restore
the non volatile registers as they have not been modified.
Only very few exceptions require non volatile registers restore.
Opencode the few places which require saving of non volatile
registers.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d1cb12d8023cc6afc1f07150565571373c04945c.1615552867.git.christophe.leroy@csgroup.eu
In order to increase flexibility, add a macro that will for now
call transfer_to_handler.
As transfer_to_handler doesn't do the actual transfer anymore,
also name it prepare_transfer_to_handler. The following patches
will progressively remove the use of transfer_to_handler label.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7f757c52518ab1d7b27ad5113b10f860e803f467.1615552867.git.christophe.leroy@csgroup.eu
Since commit 06d67d5474 ("powerpc: make process.c suitable for both
32-bit and 64-bit"), thread.regs is set on task creation, no need to
set it again and again at each interrupt entry as it never change.
Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20d52c627303d63e461797df13e6890fc04017d0.1615552867.git.christophe.leroy@csgroup.eu
Now that the MMU is re-enabled before calling the transfer function,
we don't need anymore that hack with the address of the handler and
the return function sitting just after the 'bl' to the transfer
fonction, that function is retrieving via a read relative to 'lr'.
Do a regular call to the transfer function, then to the handler,
then branch to the return function.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/73c00f3361ca280ef8fd7814c291bd1f5b6e2081.1615552867.git.christophe.leroy@csgroup.eu
Refactor booke critical registers saving into a few macros
and move it into the exception prolog directly.
Keep the dedicated transfert_to_handler entry point for the
moment allthough they are empty. They will be removed in a
later patch to reduce churn.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/269171496f1f5f22afa621695bded22976c9d48d.1615552867.git.christophe.leroy@csgroup.eu
The space in the head section is rather constrained by the fact that
exception vectors are spread every 0x100 bytes and sometimes we
need to have "out of line" code because it doesn't fit.
Now that we are enabling MMU early in the prolog, take that opportunity
to jump somewhere else in the .text section where we don't have any
space constraint.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/38b31ca4bc782a4985bc7952a675404d7ff27c24.1615552867.git.christophe.leroy@csgroup.eu
For consistency, add in the macro the label used by exception prolog
to branch to stack overflow processing.
While at it, enclose the macro in #ifdef CONFIG_VMAP_STACK on the 8xx
as already done on book3s/32.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/cf80056f5b946572ad98aea9d915dd25b23beda6.1615552867.git.christophe.leroy@csgroup.eu
The check of the emergency context initialisation in
vmap_stack_overflow is buggy for the SMP case, as it
compares r1 with 0 while in the SMP case r1 is offseted
by the CPU id.
Instead of fixing it, just perform static initialisation
of the first emergency context.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/4a67ba422be75713286dca0c86ee0d3df2eb6dfa.1615552867.git.christophe.leroy@csgroup.eu
On 40x and 8xx, kernel text is pinned.
On book3s/32, kernel text is mapped by BATs.
Enable instruction translation at the same time as data translation, it
makes things simpler.
In syscall handler, MSR_RI can also be set at the same time because
srr0/srr1 are already saved and r1 is set properly.
On booke, translation is always on, so at the end all PPC32
have translation on early. Just update msr.
Also update comment in power_save_ppc32_restore().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5269c7e5f5d2117358af3a89744d75a116be27b0.1615552867.git.christophe.leroy@csgroup.eu
8xx requires to tag the DAR with a magic value in order to
fixup DAR on faults generated by 'dcbX', as the 8xx
forgets to update the DAR for those faults.
Do the tagging as early as possible, that is before enabling MMU.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/853a2e28ca7c5fc85617037030f99fe6070c9536.1615552867.git.christophe.leroy@csgroup.eu
If the code can use a stack in vm area, it can also use a
stack in linear space.
Simplify code by removing old non VMAP stack code on PPC32.
That means the data translation is now re-enabled early in
exception prolog in all cases, not only when using VMAP stacks.
While we are touching EXCEPTION_PROLOG macros, remove the
unused for_rtas parameter in EXCEPTION_PROLOG_1.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7cd6440c60a7e8f4f035b245c57720f51e225aae.1615552866.git.christophe.leroy@csgroup.eu
ksp_limit is there to help detect stack overflows.
That is specific to ppc32 as it was removed from ppc64 in
commit cbc9565ee8 ("powerpc: Remove ksp_limit on ppc64").
There are other means for detecting stack overflows.
As ppc64 has proven to not need it, ppc32 should be able to do
without it too.
Lets remove it and simplify exception handling.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d789c3385b22e07bedc997613c0d26074cb513e7.1615552866.git.christophe.leroy@csgroup.eu
Ensure normal exception handler are able to manage stuff with
MMU enabled. For that we use CONFIG_VMAP_STACK related code
allthough there is no intention to really activate CONFIG_VMAP_STACK
on powerpc 40x for the moment.
40x uses SPRN_DEAR instead of SPRN_DAR and SPRN_ESR instead of
SPRN_DSISR. Take it into account in common macros.
40x MSR value doesn't fit on 15 bits, use LOAD_REG_IMMEDIATE() in
common macros that will be used also with 40x.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/01963af2b83037bca270d7bf1336ffcf35da8282.1615552866.git.christophe.leroy@csgroup.eu
In order the enable MMU early in exception prolog, implement
CONFIG_VMAP_STACK principles in critical exception prolog.
There is no intention to use CONFIG_VMAP_STACK on 40x,
but related code will be used to enable MMU early in exception
in a later patch.
Also address (critirq_ctx - PAGE_OFFSET) directly instead of
using tophys() in order to win one instruction.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/3fd75ee54c48307119acdbf66cfea966c1463bbd.1615552866.git.christophe.leroy@csgroup.eu
SPRN_SPRG_SCRATCH5 is used to save SPRN_PID.
SPRN_SPRG_SCRATCH6 is already available.
SPRN_PID is only 8 bits. We have r12 that contains CR.
We only need to preserve CR0, so we have space available in r12
to save PID.
Keep PID in r12 and free up SPRN_SPRG_SCRATCH5.
Then In TLB miss handlers, instead of using SPRN_SPRG_SCRATCH0 and
SPRN_SPRG_SCRATCH1, use SPRN_SPRG_SCRATCH5 and SPRN_SPRG_SCRATCH6
to avoid future conflicts with normal exception prologs.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/4cdaa85d38e14d594ba902424060ec55babf2c42.1615552866.git.christophe.leroy@csgroup.eu
As per ISA 3.1, prefixed instruction should not cross 64-byte
boundary. So don't allow Uprobe on such prefixed instruction.
There are two ways probed instruction is changed in mapped pages.
First, when Uprobe is activated, it searches for all the relevant
pages and replace instruction in them. In this case, if that probe
is on the 64-byte unaligned prefixed instruction, error out
directly. Second, when Uprobe is already active and user maps a
relevant page via mmap(), instruction is replaced via mmap() code
path. But because Uprobe is invalid, entire mmap() operation can
not be stopped. In this case just print an error and continue.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210311091538.368590-1-ravi.bangoria@linux.ibm.com
Usually sigset_t is exactly 8B which is a "trivial" size and does not
warrant using __copy_from_user(). Use __get_user() directly in
anticipation of future work to remove the trivial size optimizations
from __copy_from_user().
The ppc32 implementation of get_sigset_t() previously called
copy_from_user() which, unlike __copy_from_user(), calls access_ok().
Replacing this w/ __get_user() (no access_ok()) is fine here since both
callsites in signal_32.c are preceded by an earlier access_ok().
Signed-off-by: Christopher M. Riedl <cmr@codefail.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210227011259.11992-11-cmr@codefail.de
Add uaccess blocks and use the 'unsafe' versions of functions doing user
access where possible to reduce the number of times uaccess has to be
opened/closed.
Co-developed-by: Christopher M. Riedl <cmr@codefail.de>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Christopher M. Riedl <cmr@codefail.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210227011259.11992-10-cmr@codefail.de
Add uaccess blocks and use the 'unsafe' versions of functions doing user
access where possible to reduce the number of times uaccess has to be
opened/closed.
There is no 'unsafe' version of copy_siginfo_to_user, so move it
slightly to allow for a "longer" uaccess block.
Co-developed-by: Christopher M. Riedl <cmr@codefail.de>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Christopher M. Riedl <cmr@codefail.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210227011259.11992-9-cmr@codefail.de
Previously restore_sigcontext() performed a costly KUAP switch on every
uaccess operation. These repeated uaccess switches cause a significant
drop in signal handling performance.
Rewrite restore_sigcontext() to assume that a userspace read access
window is open by replacing all uaccess functions with their 'unsafe'
versions. Modify the callers to first open, call
unsafe_restore_sigcontext(), and then close the uaccess window.
Signed-off-by: Christopher M. Riedl <cmr@codefail.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210227011259.11992-8-cmr@codefail.de
Previously setup_sigcontext() performed a costly KUAP switch on every
uaccess operation. These repeated uaccess switches cause a significant
drop in signal handling performance.
Rewrite setup_sigcontext() to assume that a userspace write access window
is open by replacing all uaccess functions with their 'unsafe' versions.
Modify the callers to first open, call unsafe_setup_sigcontext() and
then close the uaccess window.
Signed-off-by: Christopher M. Riedl <cmr@codefail.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210227011259.11992-7-cmr@codefail.de
Both rt_sigreturn() and handle_rt_signal_64() contain TM-related ifdefs
which break-up an if/else block. Provide stubs for the ifdef-guarded TM
functions and remove the need for an ifdef in rt_sigreturn().
Rework the remaining TM ifdef in handle_rt_signal64() similar to
commit f1cf4f93de ("powerpc/signal32: Remove ifdefery in middle of if/else").
Unlike in the commit for ppc32, the ifdef can't be removed entirely
since uc_transact in sigframe depends on CONFIG_PPC_TRANSACTIONAL_MEM.
Signed-off-by: Christopher M. Riedl <cmr@codefail.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210227011259.11992-6-cmr@codefail.de
Unlike the other MSR_TM_* macros, MSR_TM_ACTIVE does not reference or
use its parameter unless CONFIG_PPC_TRANSACTIONAL_MEM is defined. This
causes an 'unused variable' compile warning unless the variable is also
guarded with CONFIG_PPC_TRANSACTIONAL_MEM.
Reference but do nothing with the argument in the macro to avoid a
potential compile warning.
Signed-off-by: Christopher M. Riedl <cmr@codefail.de>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210227011259.11992-5-cmr@codefail.de
The majority of setup_sigcontext() can be refactored to execute in an
"unsafe" context assuming an open uaccess window except for some
non-inline function calls. Move these out into a separate
prepare_setup_sigcontext() function which must be called first and
before opening up a uaccess window. Non-inline function calls should be
avoided during a uaccess window for a few reasons:
- KUAP should be enabled for as much kernel code as possible.
Opening a uaccess window disables KUAP which means any code
executed during this time contributes to a potential attack
surface.
- Non-inline functions default to traceable which means they are
instrumented for ftrace. This adds more code which could run
with KUAP disabled.
- Powerpc does not currently support the objtool UACCESS checks.
All code running with uaccess must be audited manually which
means: less code -> less work -> fewer problems (in theory).
A follow-up commit converts setup_sigcontext() to be "unsafe".
Signed-off-by: Christopher M. Riedl <cmr@codefail.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210227011259.11992-4-cmr@codefail.de
Reuse the "safe" implementation from signal.c but call unsafe_get_user()
directly in a loop to avoid the intermediate copy into a local buffer.
Signed-off-by: Christopher M. Riedl <cmr@codefail.de>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210227011259.11992-3-cmr@codefail.de
Use the same approach as unsafe_copy_to_user() but instead call
unsafe_get_user() in a loop.
Signed-off-by: Christopher M. Riedl <cmr@codefail.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210227011259.11992-2-cmr@codefail.de
49a7d46a06 (powerpc: Implement smp_cond_load_relaxed()) added
busy-waiting pausing with a preferred SMT priority pattern, lowering
the priority (reducing decode cycles) during the whole loop slowpath.
However, data shows that while this pattern works well with simple
spinlocks, queued spinlocks benefit more being kept in medium priority,
with a cpu_relax() instead, being a low+medium combo on powerpc.
Data is from three benchmarks on a Power9: 9008-22L 64 CPUs with
2 sockets and 8 threads per core.
1. locktorture.
This is data for the lowest and most artificial/pathological level,
with increasing thread counts pounding on the lock. Metrics are total
ops/minute. Despite some small hits in the 4-8 range, scenarios are
either neutral or favorable to this patch.
+=========+==========+==========+=======+
| # tasks | vanilla | dirty | %diff |
+=========+==========+==========+=======+
| 2 | 46718565 | 48751350 | 4.35 |
+---------+----------+----------+-------+
| 4 | 51740198 | 50369082 | -2.65 |
+---------+----------+----------+-------+
| 8 | 63756510 | 62568821 | -1.86 |
+---------+----------+----------+-------+
| 16 | 67824531 | 70966546 | 4.63 |
+---------+----------+----------+-------+
| 32 | 53843519 | 61155508 | 13.58 |
+---------+----------+----------+-------+
| 64 | 53005778 | 53104412 | 0.18 |
+---------+----------+----------+-------+
| 128 | 53331980 | 54606910 | 2.39 |
+=========+==========+==========+=======+
2. sockperf (tcp throughput)
Here a client will do one-way throughput tests to a localhost server, with
increasing message sizes, dealing with the sk_lock. This patch shows to put
the performance of the qspinlock back to par with that of the simple lock:
simple-spinlock vanilla dirty
Hmean 14 73.50 ( 0.00%) 54.44 * -25.93%* 73.45 * -0.07%*
Hmean 100 654.47 ( 0.00%) 385.61 * -41.08%* 771.43 * 17.87%*
Hmean 300 2719.39 ( 0.00%) 2181.67 * -19.77%* 2666.50 * -1.94%*
Hmean 500 4400.59 ( 0.00%) 3390.77 * -22.95%* 4322.14 * -1.78%*
Hmean 850 6726.21 ( 0.00%) 5264.03 * -21.74%* 6863.12 * 2.04%*
3. dbench (tmpfs)
Configured to run with up to ncpusx8 clients, it shows both latency and
throughput metrics. For the latency, with the exception of the 64 case,
there is really nothing to go by:
vanilla dirty
Amean latency-1 1.67 ( 0.00%) 1.67 * 0.09%*
Amean latency-2 2.15 ( 0.00%) 2.08 * 3.36%*
Amean latency-4 2.50 ( 0.00%) 2.56 * -2.27%*
Amean latency-8 2.49 ( 0.00%) 2.48 * 0.31%*
Amean latency-16 2.69 ( 0.00%) 2.72 * -1.37%*
Amean latency-32 2.96 ( 0.00%) 3.04 * -2.60%*
Amean latency-64 7.78 ( 0.00%) 8.17 * -5.07%*
Amean latency-512 186.91 ( 0.00%) 186.41 * 0.27%*
For the dbench4 Throughput (misleading but traditional) there's a small
but rather constant improvement:
vanilla dirty
Hmean 1 849.13 ( 0.00%) 851.51 * 0.28%*
Hmean 2 1664.03 ( 0.00%) 1663.94 * -0.01%*
Hmean 4 3073.70 ( 0.00%) 3104.29 * 1.00%*
Hmean 8 5624.02 ( 0.00%) 5694.16 * 1.25%*
Hmean 16 9169.49 ( 0.00%) 9324.43 * 1.69%*
Hmean 32 11969.37 ( 0.00%) 12127.09 * 1.32%*
Hmean 64 15021.12 ( 0.00%) 15243.14 * 1.48%*
Hmean 512 14891.27 ( 0.00%) 15162.11 * 1.82%*
Measuring the dbench4 Per-VFS Operation latency, shows some very minor
differences within the noise level, around the 0-1% ranges.
Fixes: 49a7d46a06 ("powerpc: Implement smp_cond_load_relaxed()")
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210318204702.71417-1-dave@stgolabs.net
c6f5d02b6a (locking/spinlocks/arm64: Remove smp_mb() from
arch_spin_is_locked()) made it pretty official that the call
semantics do not imply any sort of barriers, and any user that
gets creative must explicitly do any serialization.
This creativity, however, is nowadays pretty limited:
1. spin_unlock_wait() has been removed from the kernel in favor
of a lock/unlock combo. Furthermore, queued spinlocks have now
for a number of years no longer relied on _Q_LOCKED_VAL for the
call, but any non-zero value to indicate a locked state. There
were cases where the delayed locked store could lead to breaking
mutual exclusion with crossed locking; such as with sysv ipc and
netfilter being the most extreme.
2. The auditing Andrea did in verified that remaining spin_is_locked()
no longer rely on such semantics. Most callers just use it to assert
a lock is taken, in a debug nature. The only user that gets cute is
NOLOCK qdisc, as of:
96009c7d50 (sched: replace __QDISC_STATE_RUNNING bit with a spin lock)
... which ironically went in the next day after c6f5d02b6a. This
change replaces test_bit() with spin_is_locked() to know whether
to take the busylock heuristic to reduce contention on the main
qdisc lock. So any races against spin_is_locked() for archs that
use LL/SC for spin_lock() will be benign and not break any mutual
exclusion; furthermore, both the seqlock and busylock have the same
scope.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210309015950.27688-3-dave@stgolabs.net
Use user access block in gpr32_set_common() instead of
repetitive __get_user() which imply repetitive KUAP open/close.
To get it clean, force inlining of the small set of tiny functions
called inside the block.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/bdcb8652c3bb4ab5b8b3bfd08147434be8fc04c9.1615398498.git.christophe.leroy@csgroup.eu
copy_mc_xxx() functions are in the middle of raw_copy functions.
For clarity, move them out of the raw_copy functions block.
They are using access_ok, so they need to be after the general
functions in order to eventually allow the inclusion of
asm-generic/uaccess.h in some future.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2cdecb6e5a2fcee6c158d18dd254b71ec0e0da4d.1615398498.git.christophe.leroy@csgroup.eu
This is helpful to read the security flavor from inside the LPAR.
In /sys/kernel/debug/powerpc/security_features it can be seen if
mitigations are on or off but not the level set through the ASMI menu.
Furthermore, reporting it through /proc/powerpc/lparcfg allows an easy
processing by the lparstat command [1].
Export it like this in /proc/powerpc/lparcfg:
$ grep security_flavor /proc/powerpc/lparcfg
security_flavor=1
Value follows what is documented on the IBM support page [2]:
0 Speculative execution fully enabled
1 Speculative execution controls to mitigate user-to-kernel attacks
2 Speculative execution controls to mitigate user-to-kernel and
user-to-user side-channel attacks
[1] https://groups.google.com/g/powerpc-utils-devel/c/NaKXvdyl_UI/m/wa2stpIDAQAJ
[2] https://www.ibm.com/support/pages/node/715841
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210305125554.5165-1-ldufour@linux.ibm.com
H_PROTECT expects the flag value to include flags:
AVPN, pp0, pp1, pp2, key0-key4, Noexec, CMO Option flags
This patch updates hpte_updatepp() to fetch the storage key value from
the linux page table and use the same in H_PROTECT hcall.
native_hpte_updatepp() is not updated because the kernel doesn't clear
the existing storage key value there. The kernel also doesn't use
hpte_updatepp() callback for updating storage keys.
This fixes the below kernel crash observed with KUAP enabled.
BUG: Unable to handle kernel data access on write at 0xc009fffffc440000
Faulting instruction address: 0xc0000000000b7030
Key fault AMR: 0xfcffffffffffffff IAMR: 0xc0000077bc498100
Found HPTE: v = 0x40070adbb6fffc05 r = 0x1ffffffffff1194
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
...
CFAR: c000000000010100 DAR: c009fffffc440000 DSISR: 02200000 IRQMASK: 0
...
NIP memset+0x68/0x104
LR pcpu_alloc+0x54c/0xb50
Call Trace:
pcpu_alloc+0x55c/0xb50 (unreliable)
blk_stat_alloc_callback+0x94/0x150
blk_mq_init_allocated_queue+0x64/0x560
blk_mq_init_queue+0x54/0xb0
scsi_mq_alloc_queue+0x30/0xa0
scsi_alloc_sdev+0x1cc/0x300
scsi_probe_and_add_lun+0xb50/0x1020
__scsi_scan_target+0x17c/0x790
scsi_scan_channel+0x90/0xe0
scsi_scan_host_selected+0x148/0x1f0
do_scan_async+0x2c/0x2a0
async_run_entry_fn+0x78/0x220
process_one_work+0x264/0x540
worker_thread+0xa8/0x600
kthread+0x190/0x1a0
ret_from_kernel_thread+0x5c/0x6c
With KUAP enabled the kernel uses storage key 3 for all its
translations. But as shown by the debug print, in this specific case we
have the hash page table entry created with key value 0.
Found HPTE: v = 0x40070adbb6fffc05 r = 0x1ffffffffff1194
and DSISR indicates a key fault.
This can happen due to parallel fault on the same EA by different CPUs:
CPU 0 CPU 1
fault on X
H_PAGE_BUSY set
fault on X
finish fault handling and
clear H_PAGE_BUSY
check for H_PAGE_BUSY
continue with fault handling.
This implies CPU1 will end up calling hpte_updatepp for address X and
the kernel updated the hash pte entry with key 0
Fixes: d94b827e89 ("powerpc/book3s64/kuap: Use Key 3 for kernel mapping with hash translation")
Reported-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Debugged-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210326070755.304625-1-aneesh.kumar@linux.ibm.com
Add architecture specific implementation details for KFENCE and enable
KFENCE for the ppc32 architecture. In particular, this implements the
required interface in <asm/kfence.h>.
KFENCE requires that attributes for pages from its memory pool can
individually be set. Therefore, force the Read/Write linear map to be
mapped at page granularity.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Marco Elver <elver@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8dfe1bd2abde26337c1d8c1ad0acfcc82185e0d5.1614868445.git.christophe.leroy@csgroup.eu
"offsetof(struct pt_regs, msr) == offsetof(struct user_pt_regs, msr)"
checked in pt_regs_check() twice in a row. Remove the second check.
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210305112807.26299-1-efremov@linux.com
Fixes the following W=1 kernel build warning(s):
drivers/tty/hvc/hvc_vio.c:385:13: warning: no previous prototype for ‘hvc_vio_init_early’
385 | void __init hvc_vio_init_early(void)
| ^~~~~~~~~~~~~~~~~~
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210303124603.3150175-1-lee.jones@linaro.org
asm/tm.h included in traps.c is duplicated. It is also included on
the 62nd line.
asm/udbg.h included in setup-common.c is duplicated. It is also
included on the 61st line.
asm/bug.h included in arch/powerpc/include/asm/book3s/64/mmu-hash.h
is duplicated. It is also included on the 12th line.
asm/tlbflush.h included in arch/powerpc/include/asm/pgtable.h is
duplicated. It is also included on the 11th line.
asm/page.h included in arch/powerpc/include/asm/thread_info.h is
duplicated. It is also included on the 13th line.
Signed-off-by: Zhang Yunkai <zhang.yunkai@zte.com.cn>
[mpe: Squash together from multiple commits]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
If identical_pvr_fixup() is not inlined, there are two modpost warnings:
WARNING: modpost: vmlinux.o(.text+0x54e8): Section mismatch in reference
from the function identical_pvr_fixup() to the function
.init.text:of_get_flat_dt_prop()
The function identical_pvr_fixup() references
the function __init of_get_flat_dt_prop().
This is often because identical_pvr_fixup lacks a __init
annotation or the annotation of of_get_flat_dt_prop is wrong.
WARNING: modpost: vmlinux.o(.text+0x551c): Section mismatch in reference
from the function identical_pvr_fixup() to the function
.init.text:identify_cpu()
The function identical_pvr_fixup() references
the function __init identify_cpu().
This is often because identical_pvr_fixup lacks a __init
annotation or the annotation of identify_cpu is wrong.
identical_pvr_fixup() calls two functions marked as __init and is only
called by a function marked as __init so it should be marked as __init
as well. At the same time, remove the inline keywork as it is not
necessary to inline this function. The compiler is still free to do so
if it feels it is worthwhile since commit 889b3c1245 ("compiler:
remove CONFIG_OPTIMIZE_INLINING entirely").
Fixes: 14b3d926a2 ("[POWERPC] 4xx: update 440EP(x)/440GR(x) identical PVR issue workaround")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://github.com/ClangBuiltLinux/linux/issues/1316
Link: https://lore.kernel.org/r/20210302200829.2680663-1-nathan@kernel.org
If fadump_calculate_reserve_size() is not inlined, there is a modpost
warning:
WARNING: modpost: vmlinux.o(.text+0x5196c): Section mismatch in
reference from the function fadump_calculate_reserve_size() to the
function .init.text:parse_crashkernel()
The function fadump_calculate_reserve_size() references
the function __init parse_crashkernel().
This is often because fadump_calculate_reserve_size lacks a __init
annotation or the annotation of parse_crashkernel is wrong.
fadump_calculate_reserve_size() calls parse_crashkernel(), which is
marked as __init and fadump_calculate_reserve_size() is called from
within fadump_reserve_mem(), which is also marked as __init.
Mark fadump_calculate_reserve_size() as __init to fix the section
mismatch. Additionally, remove the inline keyword as it is not necessary
to inline this function; the compiler is still free to do so if it feels
it is worthwhile since commit 889b3c1245 ("compiler: remove
CONFIG_OPTIMIZE_INLINING entirely").
Fixes: 11550dc0a0 ("powerpc/fadump: reuse crashkernel parameter for fadump memory reservation")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://github.com/ClangBuiltLinux/linux/issues/1300
Link: https://lore.kernel.org/r/20210302195013.2626335-1-nathan@kernel.org
Commit 407d418f2f ("powerpc/chrp: Move PHB discovery") moved the
sole call to hydra_init() to the source file where it is defined, so it
can be made static.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210223095345.2139416-1-geert@linux-m68k.org
The mutex linear_mapping_mutex is defined at the of the file while its
only two user are within the CONFIG_MEMORY_HOTPLUG block.
A compile without CONFIG_MEMORY_HOTPLUG set fails on PREEMPT_RT because
its mutex implementation is smart enough to realize that it is unused.
Move the definition of linear_mapping_mutex to ifdef block where it is
used.
Fixes: 1f73ad3e8d ("powerpc/mm: print warning in arch_remove_linear_mapping()")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210219165648.2505482-1-bigeasy@linutronix.de
Sysace IP is no longer used on Xilinx PowerPC 405/440 and Microblaze
systems. The driver is not regularly tested and very likely not working for
quite a long time that's why remove it.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The pseries join/suspend sequence in its current form was written with
the assumption that it was the only user of H_PROD and that it needn't
handle spurious successful returns from H_JOIN. That's wrong;
powerpc's paravirt spinlock code uses H_PROD, and CPUs entering
do_join() can be woken prematurely from H_JOIN with a status of
H_SUCCESS as a result. This causes all CPUs to exit the sequence
early, preventing suspend from occurring at all.
Add a 'done' boolean flag to the pseries_suspend_info struct, and have
the waking thread set it before waking the other threads. Threads
which receive H_SUCCESS from H_JOIN retry if the 'done' flag is still
unset.
Fixes: 9327dc0aee ("powerpc/pseries/mobility: use stop_machine for join/suspend")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210315080045.460331-3-nathanl@linux.ibm.com
The atomic_t counter is the only shared state for the join/suspend
sequence so far, but that will change. Contain it in a
struct (pseries_suspend_info), and document its intended use. No
functional change.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210315080045.460331-2-nathanl@linux.ibm.com
Use the local variable that is passed to swiotlb_init_with_tbl for
freeing the memory in the failure case to isolate the code a little
better from swiotlb internals.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Resolves a merge issue with:
drivers/tty/hvc/hvcs.c
and we want the tty/serial fixes from 5.12-rc3 in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The code relies on constant folding of cpu_has_feature() based
on possible and always true values as defined per
CPU_FTRS_ALWAYS and CPU_FTRS_POSSIBLE.
Build failure is encountered with for instance
book3e_all_defconfig on kisskb in the AMDGPU driver which uses
cpu_has_feature(CPU_FTR_VSX_COMP) to decide whether calling
kernel_enable_vsx() or not.
The failure is due to cpu_has_feature() not being inlined with
that configuration with gcc 4.9.
In the same way as commit acdad8fb4a ("powerpc: Force inlining of
mmu_has_feature to fix build failure"), for inlining of
cpu_has_feature().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b231dfa040ce4cc37f702f5c3a595fdeabfe0462.1615378209.git.christophe.leroy@csgroup.eu
With some defconfig including CONFIG_CC_OPTIMIZE_FOR_SIZE,
(for instance mvme5100_defconfig and ps3_defconfig), gcc 5
generates a call to _restgpr_31_x.
Until recently it went unnoticed, but
commit 42ed6d56ad ("powerpc/vdso: Block R_PPC_REL24 relocations")
made it rise to the surface.
Provide that function (copied from lib/crtsavres.S) in
gettimeofday.S
Fixes: ab037dd87a ("powerpc/vdso: Switch VDSO to generic C implementation.")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a7aa198a88bcd33c6e35e99f70f86c7b7f2f9440.1615270757.git.christophe.leroy@csgroup.eu
clearing everything *except* S_ISGID (including the S_IFDIR, among
other things) is wrong. Just use init_inode_owner() and be done
with that...
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
unrecoverable_exception() is called from interrupt handlers or
after an interrupt handler has failed.
Make it a standard function to avoid doubling the actions
performed on interrupt entry (e.g.: user time accounting).
Fixes: 3a96570ffc ("powerpc: convert interrupt handlers to use wrappers")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ae96c59fa2cb7f24a8929c58cfa2c909cb8ff1f1.1615291471.git.christophe.leroy@csgroup.eu
kexec_fdt_totalsize_ppc64() includes the base FDT size in its size
calculation, but commit 3c985d31ad ("powerpc: Use common
of_kexec_alloc_and_setup_fdt()") changed the kexec code to use the
generic function of_kexec_alloc_and_setup_fdt() which already includes
the base FDT size. That change made the code overestimate the size a bit
by counting twice the space required for the kernel command line and
/chosen properties.
Therefore change kexec_fdt_totalsize_ppc64() to calculate just the extra
space needed by the kdump kernel, and change the function name so that it
better reflects what the function is now doing.
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Reviewed-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
[robh: reword commit msg as no longer a fix from merging to branches]
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210220005204.1417200-1-bauerman@linux.ibm.com
The Cyclades driver was orphaned by commit d459883e6c (MAINTAINERS:
remove two dead e-mail) 13 years ago. Noone stepped up to take care of
them and to fix all the issues the driver has.
On the top of that, there is no way to obtain the firmware for Z cards
from the vendor as cyclades.com ceased to exist.
So it's time to drop the driver with all its traces.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210302062214.29627-5-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add stub instances of enable_kernel_vsx() and disable_kernel_vsx()
when CONFIG_VSX is not set, to avoid following build failure.
CC [M] drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dcn_calcs.o
In file included from ./drivers/gpu/drm/amd/amdgpu/../display/dc/dm_services_types.h:29,
from ./drivers/gpu/drm/amd/amdgpu/../display/dc/dm_services.h:37,
from drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dcn_calcs.c:27:
drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dcn_calcs.c: In function 'dcn_bw_apply_registry_override':
./drivers/gpu/drm/amd/amdgpu/../display/dc/os_types.h:64:3: error: implicit declaration of function 'enable_kernel_vsx'; did you mean 'enable_kernel_fp'? [-Werror=implicit-function-declaration]
64 | enable_kernel_vsx(); \
| ^~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dcn_calcs.c:640:2: note: in expansion of macro 'DC_FP_START'
640 | DC_FP_START();
| ^~~~~~~~~~~
./drivers/gpu/drm/amd/amdgpu/../display/dc/os_types.h:75:3: error: implicit declaration of function 'disable_kernel_vsx'; did you mean 'disable_kernel_fp'? [-Werror=implicit-function-declaration]
75 | disable_kernel_vsx(); \
| ^~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dcn_calcs.c:676:2: note: in expansion of macro 'DC_FP_END'
676 | DC_FP_END();
| ^~~~~~~~~
cc1: some warnings being treated as errors
make[5]: *** [drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dcn_calcs.o] Error 1
This works because the caller is checking if VSX is available using
cpu_has_feature():
#define DC_FP_START() { \
if (cpu_has_feature(CPU_FTR_VSX_COMP)) { \
preempt_disable(); \
enable_kernel_vsx(); \
} else if (cpu_has_feature(CPU_FTR_ALTIVEC_COMP)) { \
preempt_disable(); \
enable_kernel_altivec(); \
} else if (!cpu_has_feature(CPU_FTR_FPU_UNAVAILABLE)) { \
preempt_disable(); \
enable_kernel_fp(); \
} \
When CONFIG_VSX is not selected, cpu_has_feature(CPU_FTR_VSX_COMP)
constant folds to 'false' so the call to enable_kernel_vsx() is
discarded and the build succeeds.
Fixes: 16a9dea110 ("amdgpu: Enable initial DCN support on POWER")
Cc: stable@vger.kernel.org # v5.6+
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Incorporate some discussion comments into the change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8d7d285a027e9d21f5ff7f850fa71a2655b0c4af.1615279170.git.christophe.leroy@csgroup.eu
Nick's patch cleaning up the SRR specifiers in exception-64s.S missed
a single instance of EXC_HV_OR_STD. Clean that up.
Caught by clang's integrated assembler.
Fixes: 3f7fbd97d0 ("powerpc/64s/exception: Clean up SRR specifiers")
Signed-off-by: Daniel Axtens <dja@axtens.net>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210225031006.1204774-2-dja@axtens.net
This bit operation was inverted and set the low bit rather than
cleared it, breaking the ability to ptrace non-volatile GPRs after
exec. Fix.
Only affects 64e and 32-bit.
Fixes: feb9df3462 ("powerpc/64s: Always has full regs, so remove remnant checks")
Cc: stable@vger.kernel.org # v5.8+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210308085530.3191843-1-npiggin@gmail.com
In ppc_function_entry() we look for a specific set of instructions by
masking the instructions and comparing with a known value. Currently
those known values are just literal hex values, and we recently
discovered one of them was wrong.
Instead construct the values using the existing constants we have for
defining various fields of instructions.
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20210309071544.515303-1-mpe@ellerman.id.au
'lis r2,N' is 'addis r2,0,N' and the instruction encoding in the macro
LIS_R2 is incorrect (it currently maps to 'addis r0,r2,N'). Fix the
same.
Fixes: c71b7eff42 ("powerpc: Add ABIv2 support to ppc_function_entry")
Cc: stable@vger.kernel.org # v3.16+
Reported-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210304020411.16796-1-naveen.n.rao@linux.vnet.ibm.com
delete_fdt_mem_rsv() defined in "arch/powerpc/kexec/file_load.c"
has been renamed to fdt_find_and_del_mem_rsv(), and moved to
"drivers/of/kexec.c".
Remove delete_fdt_mem_rsv() in "arch/powerpc/kexec/file_load.c".
Co-developed-by: Prakhar Srivastava <prsriva@linux.microsoft.com>
Signed-off-by: Prakhar Srivastava <prsriva@linux.microsoft.com>
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210221174930.27324-13-nramas@linux.microsoft.com
The functions defined in "arch/powerpc/kexec/ima.c" handle setting up
and freeing the resources required to carry over the IMA measurement
list from the current kernel to the next kernel across kexec system call.
These functions do not have architecture specific code, but are
currently limited to powerpc.
Move remove_ima_buffer() and setup_ima_buffer() calls into
of_kexec_alloc_and_setup_fdt() defined in "drivers/of/kexec.c".
Move the remaining architecture independent functions from
"arch/powerpc/kexec/ima.c" to "drivers/of/kexec.c".
Delete "arch/powerpc/kexec/ima.c" and "arch/powerpc/include/asm/ima.h".
Remove references to the deleted files and functions in powerpc and
in ima.
Co-developed-by: Prakhar Srivastava <prsriva@linux.microsoft.com>
Signed-off-by: Prakhar Srivastava <prsriva@linux.microsoft.com>
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Tested-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210221174930.27324-11-nramas@linux.microsoft.com
CONFIG_HAVE_IMA_KEXEC is enabled to indicate that the IMA measurement
log information is present in the device tree. This should be selected
only if CONFIG_IMA is enabled.
Update CONFIG_KEXEC_FILE to select CONFIG_HAVE_IMA_KEXEC, if CONFIG_IMA
is enabled, to indicate that the IMA measurement log information is
present in the device tree for powerpc.
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Suggested-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210221174930.27324-10-nramas@linux.microsoft.com
The fields ima_buffer_addr and ima_buffer_size in "struct kimage_arch"
for powerpc are used to carry forward the IMA measurement list across
kexec system call. These fields are not architecture specific, but are
currently limited to powerpc.
arch_ima_add_kexec_buffer() defined in "arch/powerpc/kexec/ima.c"
sets ima_buffer_addr and ima_buffer_size for the kexec system call.
This function does not have architecture specific code, but is
currently limited to powerpc.
Move ima_buffer_addr and ima_buffer_size to "struct kimage".
Set ima_buffer_addr and ima_buffer_size in ima_add_kexec_buffer()
in security/integrity/ima/ima_kexec.c.
Co-developed-by: Prakhar Srivastava <prsriva@linux.microsoft.com>
Signed-off-by: Prakhar Srivastava <prsriva@linux.microsoft.com>
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Suggested-by: Will Deacon <will@kernel.org>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210221174930.27324-9-nramas@linux.microsoft.com
The code for setting up the /chosen node in the device tree
and updating the memory reservation for the next kernel has been
moved to of_kexec_alloc_and_setup_fdt() defined in "drivers/of/kexec.c".
Use the common of_kexec_alloc_and_setup_fdt() to setup the device tree
and update the memory reservation for kexec for powerpc.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210221174930.27324-8-nramas@linux.microsoft.com
ELF related fields elf_headers, elf_headers_sz, and elfcorehdr_addr
have been moved from 'struct kimage_arch' to 'struct kimage' as
elf_headers, elf_headers_sz, and elf_load_addr respectively.
Use the ELF fields defined in 'struct kimage'.
Suggested-by: Rob Herring <robh@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210221174930.27324-4-nramas@linux.microsoft.com
have dump_skip() just remember how much needs to be skipped,
leave actual seeks/writing zeroes to the next dump_emit()
or the end of coredump output, whichever comes first.
And instead of playing with do_truncate() in the end, just
write one NUL at the end of the last gap (if any).
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
kmsg_dump_rewind() and kmsg_dump_get_line() are lockless, so there is
no need for _nolock() variants. Remove these functions and switch all
callers of the _nolock() variants.
The functions without _nolock() were chosen because they are already
exported to kernel modules.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210303101528.29901-15-john.ogness@linutronix.de
Rather than storing the iterator information in the registered
kmsg_dumper structure, create a separate iterator structure. The
kmsg_dump_iter structure can reside on the stack of the caller, thus
allowing lockless use of the kmsg_dump functions.
Update code that accesses the kernel logs using the kmsg_dumper
structure to use the new kmsg_dump_iter structure. For kmsg_dumpers,
this also means adding a call to kmsg_dump_rewind() to initialize
the iterator.
All this is in preparation for removal of @logbuf_lock.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org> # pstore
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210303101528.29901-13-john.ogness@linutronix.de
Shivaprasad G Bhat