Commit Graph

77 Commits

Author SHA1 Message Date
Alexey Dobriyan 4be929be34 kernel-wide: replace USHORT_MAX, SHORT_MAX and SHORT_MIN with USHRT_MAX, SHRT_MAX and SHRT_MIN
- C99 knows about USHRT_MAX/SHRT_MAX/SHRT_MIN, not
  USHORT_MAX/SHORT_MAX/SHORT_MIN.

- Make SHRT_MIN of type s16, not int, for consistency.

[akpm@linux-foundation.org: fix drivers/dma/timb_dma.c]
[akpm@linux-foundation.org: fix security/keys/keyring.c]
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-25 08:07:02 -07:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Chuck Lever 012da158f6 SUNRPC: Use soft connects for autobinding over TCP
Autobinding is handled by the rpciod process, not in user processes
that are generating regular RPC requests.  Thus autobinding is usually
not affected by signals targetting user processes, such as KILL or
timer expiration events.

In addition, an RPC request generated by a user process that has
RPC_TASK_SOFTCONN set and needs to perform an autobind will hang if
the remote rpcbind service is not available.

For rpcbind queries on connection-oriented transports, let's use the
new soft connect semantic to return control to the user's process
quickly, if the kernel's rpcbind client can't connect to the remote
rpcbind service.

Logic is introduced in call_bind_status() to handle connection errors
that occurred during an asynchronous rpcbind query.  The logic
abandons the rpcbind query if the RPC request has SOFTCONN set, and
retries after a few seconds in the normal case.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-12-03 15:58:56 -05:00
Chuck Lever 2a76b3bfa2 SUNRPC: Use TCP for local rpcbind upcalls
Use TCP with the soft connect semantic for local rpcbind upcalls so
the kernel can detect immediately if the local rpcbind daemon is not
running.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2009-12-03 15:58:56 -05:00
Chuck Lever c526611dd6 SUNRPC: Use a cached RPC client and transport for rpcbind upcalls
The kernel's rpcbind client creates and deletes an rpc_clnt and its
underlying transport socket for every upcall to the local rpcbind
daemon.

When starting a typical NFS server on IPv4 and IPv6, the NFS service
itself does three upcalls (one per version) times two upcalls (one
per transport) times two upcalls (one per address family), making 12,
plus another one for the initial call to unregister previous NFS
services.  Starting the NLM service adds an additional 13 upcalls,
for similar reasons.

(Currently the NFS service doesn't start IPv6 listeners, but it will
soon enough).

Instead, let's create an rpc_clnt for rpcbind upcalls during the
first local rpcbind query, and cache it.  This saves the overhead of
creating and destroying an rpc_clnt and a socket for every upcall.

The new logic also prevents the kernel from attempting an RPCB_SET or
RPCB_UNSET if it knows from the start that the local portmapper does
not support rpcbind protocol version 4.  This will cut down on the
number of rpcbind upcalls in legacy environments.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2009-12-03 15:58:56 -05:00
Chuck Lever 5a46211540 SUNRPC: Simplify synopsis of rpcb_local_clnt()
Clean up: At one point, rpcb_local_clnt() handled IPv6 loopback
addresses too, but it doesn't any more; only IPv4 loopback is used
now.  Get rid of the @addr and @addrlen arguments to
rpcb_local_clnt().

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-12-03 15:58:56 -05:00
Chuck Lever f8b761eff1 SUNRPC: Eliminate PROC macro from rpcb_clnt
Clean up: Replace PROC macro with open coded C99 structure
initializers to improve readability.

The rpcbind v4 GETVERSADDR procedure is never sent by the current
implementation, so it is not copied to the new structures.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-08-09 15:09:44 -04:00
Chuck Lever 0e47f0d665 SUNRPC: Clean up: Remove unused XDR decoder functions from rpcb_clnt.c
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-08-09 15:09:43 -04:00
Chuck Lever c0c077df00 SUNRPC: Introduce new xdr_stream-based decoders to rpcb_clnt.c
Replace the open-coded decode logic for PMAP_GETPORT/RPCB_GETADDR with
an xdr_stream-based implementation, similar to what NFSv4 uses, to
protect against buffer overflows.  The new implementation also checks
that the incoming port number is reasonable.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-08-09 15:09:43 -04:00
Chuck Lever 7ed0ff983c SUNRPC: Introduce xdr_stream-based decoders for RPCB_UNSET
Replace the open-coded decode logic for rpcbind UNSET results with an
xdr_stream-based implementation, similar to what NFSv4 uses, to
protect against buffer overflows.

The new function is unused for the moment.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-08-09 15:09:42 -04:00
Chuck Lever 0d36c4f757 SUNRPC: Clean up: Remove unused XDR encoder functions from rpcb_clnt.c
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-08-09 15:09:41 -04:00
Chuck Lever 6f2c2db7a4 SUNRPC: Introduce new xdr_stream-based encoders to rpcb_clnt.c
Replace the open-coded encode logic for rpcbind arguments with an
xdr_stream-based implementation, similar to what NFSv4 uses, to
better protect against buffer overflows.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-08-09 15:09:40 -04:00
Chuck Lever ba809130bc SUNRPC: Remove duplicate universal address generation
RPC universal address generation is currently done in several places:
rpcb_clnt.c, nfs4proc.c xprtsock.c, and xprtrdma.c.  Remove the
redundant cases that convert a socket address to a universal
address.  The nfs4proc.c case takes a pre-formatted presentation
address string, not a socket address, so we'll leave that one.

Because the new uaddr constructor uses the recently introduced
rpc_ntop(), it now supports proper "::" shorthanding for IPv6
addresses.  This allows the kernel to register properly formed
universal addresses with the local rpcbind service, in _all_ cases.

The kernel can now also send properly formed universal addresses in
RPCB_GETADDR requests, and support link-local properly when
encoding and decoding IPv6 addresses.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-08-09 15:09:35 -04:00
Chuck Lever 0b10bf5e14 SUNRPC: Move XDR data type size macros
Clean up: To make subsequent patches cleaner, move the XDR data type
size macros to the top of the file (similar to nfs4xdr.c) first.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-08-09 15:09:33 -04:00
Chuck Lever 363f724cdd SUNRPC: rpcb_register() should handle errors silently
Move error reporting for RPC registration to rpcb_register's caller.

This way the caller can choose to recover silently from certain
errors, but report errors it does not recognize.  Error reporting
for kernel RPC service registration is now handled in one place.

This patch is part of a series that addresses
   http://bugzilla.kernel.org/show_bug.cgi?id=12256

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-28 15:59:48 -04:00
Chuck Lever 1673d0de40 SUNRPC: Allow callers to pass rpcb_v4_register a NULL address
The user space TI-RPC library uses an empty string for the universal
address when unregistering all target addresses for [program, version].
The kernel's rpcb client should behave the same way.

Here, we are switching between several registration methods based on
the protocol family of the incoming address.  Rename the other rpcbind
v4 registration functions to make it clear that they, as well, are
switched on protocol family.  In /etc/netconfig, this is either "inet"
or "inet6".

NB: The loopback protocol families are not supported in the kernel.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-28 15:57:00 -04:00
Chuck Lever 126e4bc3b3 SUNRPC: rpcbind actually interprets r_owner string
RFC 1833 has little to say about the contents of r_owner; it only
specifies that it is a string, and states that it is used to control
who can UNSET an entry.

Our port of rpcbind (from Sun) assumes this string contains a numeric
UID value, not alphabetical or symbolic characters, but checks this
value only for AF_LOCAL RPCB_SET or RPCB_UNSET requests.  In all other
cases, rpcbind ignores the contents of the r_owner string.

The reference user space implementation of rpcb_set(3) uses a numeric
UID for all SET/UNSET requests (even via the network) and an empty
string for all other requests.  We emulate that behavior here to
maintain bug-for-bug compatibility.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-28 15:56:04 -04:00
Chuck Lever 3aba45536f SUNRPC: Clean up address type casts in rpcb_v4_register()
Clean up: Simplify rpcb_v4_register() and its helpers by moving the
details of sockaddr type casting to rpcb_v4_register()'s helper
functions.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-28 15:55:52 -04:00
Chuck Lever fc28decdc9 SUNRPC: Use IPv4 loopback for registering AF_INET6 kernel RPC services
The kernel uses an IPv6 loopback address when registering its AF_INET6
RPC services so that it can tell whether the local portmapper is
actually IPv6-enabled.

Since the legacy portmapper doesn't listen on IPv6, however, this
causes a long timeout on older systems if the kernel happens to try
creating and registering an AF_INET6 RPC service.  Originally I wanted
to use a connected transport (either TCP or connected UDP) so that the
upcall would fail immediately if the portmapper wasn't listening on
IPv6, but we never agreed on what transport to use.

In the end, it's of little consequence to the kernel whether the local
portmapper is listening on IPv6.  It's only important whether the
portmapper supports rpcbind v4.  And the kernel can't tell that at all
if it is sending requests via IPv6 -- the portmapper will just ignore
them.

So, send both rpcbind v2 and v4 SET/UNSET requests via IPv4 loopback
to maintain better backwards compatibility between new kernels and
legacy user space, and prevent multi-second hangs in some cases when
the kernel attempts to register RPC services.

This patch is part of a series that addresses

   http://bugzilla.kernel.org/show_bug.cgi?id=12256

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-28 15:55:28 -04:00
Chuck Lever 776bd5c7a2 SUNRPC: Don't flag empty RPCB_GETADDR reply as bogus
In 2007, commit e65fe3976f added
additional sanity checking to rpcb_decode_getaddr() to make sure we
were getting a reply that was long enough to be an actual universal
address.  If the uaddr string isn't long enough, the XDR decoder
returns EIO.

However, an empty string is a valid RPCB_GETADDR response if the
requested service isn't registered.  Moreover, "::.n.m" is also a
valid RPCB_GETADDR response for IPv6 addresses that is shorter
than rpcb_decode_getaddr()'s lower limit of 11.  So this sanity
check introduced a regression for rpcbind requests against IPv6
remotes.

So revert the lower bound check added by commit
e65fe3976f, and add an explicit check
for an empty uaddr string, similar to libtirpc's rpcb_getaddr(3).

Pointed-out-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-28 15:52:08 -04:00
Harvey Harrison 21454aaad3 net: replace NIPQUAD() in net/*/
Using NIPQUAD() with NIPQUAD_FMT, %d.%d.%d.%d or %u.%u.%u.%u
can be replaced with %pI4

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-31 00:54:56 -07:00
Harvey Harrison 5b095d9892 net: replace %p6 with %pI6
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-29 12:52:50 -07:00
Harvey Harrison fdb46ee752 net, misc: replace uses of NIP6_FMT with %p6
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-28 23:02:32 -07:00
Trond Myklebust 6925bac120 Merge branch 'next' 2008-10-15 15:54:56 -04:00
Trond Myklebust 96165e2b7c SUNRPC: Fix a memory leak in rpcb_getport_async
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-10-07 18:18:57 -04:00
Trond Myklebust 9a4bd29fe8 SUNRPC: Fix autobind on cloned rpc clients
Despite the fact that cloned rpc clients won't have the cl_autobind flag
set, they may still find themselves calling rpcb_getport_async(). For this
to happen, it suffices for a _parent_ rpc_clnt to use autobinding, in which
case any clone may find itself triggering the !xprt_bound() case in
call_bind().

The correct fix for this is to walk back up the tree of cloned rpc clients,
in order to find the parent that 'owns' the transport, either because it
has clnt->cl_autobind set, or because it originally created the
transport...

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-10-07 18:18:53 -04:00
Chuck Lever db820d6376 SUNRPC: Clean up debug messages in rpcb_clnt.c
The RPCB XDR functions are used for multiple procedures.  For instance,
rpcb_encode_getaddr() is used for RPCB_GETADDR, RPCB_SET, and
RPCB_UNSET.  Make the XDR debug messages more generic so they are less
confusing.

And, unlike in other RPC consumers in the kernel, a single debug flag
enables all levels of debug messages in the RPC bind client, including
XDR debug messages.  Since the XDR decoders already report success or
failure in this case, remove redundant debug messages in the mid-level
rpcb_register_call() function.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-09-29 18:13:40 -04:00
Chuck Lever 9d548b9c95 SUNRPC: Use short-hand IPv6 ANYADDR for RPCB_SET
Clean up: When doing an RPCB_SET, make the kernel's rpcb client use the
shorthand "::" for the universal form of the IPv6 ANY address.

Without this patch, rpcbind will advertise:

  0000:0000:0000:0000:0000:0000:0000:0000.x.y

This is cosmetic only.  It cleans up the display of information from
/sbin/rpcinfo.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-09-29 18:13:40 -04:00
Chuck Lever 14aeb2118d SUNRPC: Simplify rpcb_register() API
Bruce suggested there's no need to expose the difference between an error
sending the PMAP_SET request and an error reply from the portmapper to
rpcb_register's callers.  The user space equivalent of rpcb_register() is
pmap_set(3), which returns a bool_t : either the PMAP set worked, or it
didn't.  Simple.

So let's remove the "*okay" argument from rpcb_register() and
rpcb_v4_register(), and simply return an error if any part of the call
didn't work.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-09-29 18:13:37 -04:00
Chuck Lever c2e1b09ff2 SUNRPC: Support registering IPv6 interfaces with local rpcbind daemon
Introduce a new API to register RPC services on IPv6 interfaces to allow
the NFS server and lockd to advertise on IPv6 networks.

Unlike rpcb_register(), the new rpcb_v4_register() function uses rpcbind
protocol version 4 to contact the local rpcbind daemon.  The version 4
SET/UNSET procedures allow services to register address families besides
AF_INET, register at specific network interfaces, and register transport
protocols besides UDP and TCP.  All of this functionality is exposed via
the new rpcb_v4_register() kernel API.

A user-space rpcbind daemon implementation that supports version 4 of the
rpcbind protocol is required in order to make use of this new API.

Note that rpcbind version 3 is sufficient to support the new rpcbind
facilities listed above, but most extant implementations use version 4.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-07-15 18:08:55 -04:00
Chuck Lever babe80eb49 SUNRPC: Refactor rpcb_register to make rpcbindv4 support easier
rpcbind version 4 registration will reuse part of rpcb_register, so just
split it out into a separate function now.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-07-15 18:08:51 -04:00
Chuck Lever 423d8b0647 SUNRPC: None of rpcb_create's callers wants a privileged source port
Clean up: Callers that required a privileged source port now use
rpcb_create_local(), so we can remove the @privileged argument from
rpcb_create().

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-07-15 18:08:47 -04:00
Chuck Lever cc5598b78f SUNRPC: Introduce a specific rpcb_create for contacting localhost
Add rpcb_create_local() for use by rpcb_register() and upcoming IPv6
registration functions.

Ensure any errors encountered by rpcb_create_local() are properly
reported.

We can also use a statically allocated constant loopback socket address
instead of one allocated on the stack and initialized every time the
function is called.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-07-15 18:08:44 -04:00
Chuck Lever 166b88d755 SUNRPC: Use correct XDR encoding procedure for rpcbind SET/UNSET
The rpcbind versions 3 and 4 SET and UNSET procedures use the same
arguments as the GETADDR procedure.

While definitely a bug, this hasn't been a problem so far since the
kernel hasn't used version 3 or 4 SET and UNSET.  But this will change
in just a moment.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-07-15 18:08:40 -04:00
Trond Myklebust 381ba74af5 SUNRPC: Ensure our task is notified when an rpcbind call is done
If another task is busy in rpcb_getport_async number, it is more efficient
to have it wake us up when it has finished instead of arbitrarily sleeping
for 5 seconds.

Also ensure that rpcb_wake_rpcbind_waiters() is called regardless of
whether or not rpcb_getport_done() gets called.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-07-09 12:09:45 -04:00
Chuck Lever 40fef8a649 SUNRPC: Use only rpcbind v2 for AF_INET requests
Some server vendors support the higher versions of rpcbind only for
AF_INET6.  The kernel doesn't need to use v3 or v4 for AF_INET anyway,
so change the kernel's rpcbind client to query AF_INET servers over
rpcbind v2 only.

This has a few interesting benefits:

1. If the rpcbind request is going over TCP, and the server doesn't
   support rpcbind versions 3 or 4, the client reduces by two the number
   of ephemeral ports left in TIME_WAIT for each rpcbind request.  This
   will help during NFS mount storms.

2. The rpcbind interaction with servers that don't support rpcbind
   versions 3 or 4 will use less network traffic.  Also helpful
   during mount storms.

3. We can eliminate the kernel build option that controls whether the
   kernel's rpcbind client uses rpcbind version 3 and 4 for AF_INET
   servers.  Less complicated kernel configuration...

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-07-09 12:09:37 -04:00
Chuck Lever 8842413aa4 SUNRPC: Use GETADDR for rpcbind version 4 queries
Some rpcbind servers that do support rpcbind version 4 do not support
the GETVERSADDR procedure.  Use GETADDR for querying rpcbind servers
via rpcbind version 4 instead of GETVERSADDR.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-07-09 12:09:36 -04:00
Chuck Lever 6a77405157 SUNRPC: Use rpcbind version 2 GETPORT
Clean up: Change the version 2 procedure name to GETPORT.  It's the same
procedure number as GETADDR, but version 2 implementations usually refer
to it as GETPORT.

This also now matches the procedure name used in the version 2 procedure
entry in the rpcb_next_version[] array, making it slightly less confusing.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-07-09 12:09:35 -04:00
Chuck Lever fc200e794d SUNRPC: Document some naked integers in rpcbind client
Clean up: Replace naked integers that represent rpcbind protocol versions.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-07-09 12:09:34 -04:00
Chuck Lever 877fcf1039 SUNRPC: More useful debugging output for rpcb client
Clean up dprintk's in rpcb client's XDR decoder functions.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-07-09 12:09:33 -04:00
Trond Myklebust 803a9067e1 SUNRPC: Fix an rpcbind breakage for the case of IPv6 lookups
Now that rpcb_next_version has been split into an IPv4 version and an IPv6
version, we Oops when rpcb_call_async attempts to look up the IPv6-specific
RPC procedure in rpcb_next_version.

Fix the Oops simply by having rpcb_getport_async pass the correct RPC
procedure as an argument.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-07-08 15:23:10 -04:00
Trond Myklebust 0d3a34b48c SUNRPC: Fix a double-free in rpcbind
It is wrong to be freeing up the rpcbind arguments if the call to
rpcb_call_async() fails, since they should already have been freed up by
rpcb_map_release().

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-07-08 15:23:00 -04:00
Trond Myklebust 233607dbbc Merge branch 'devel' 2008-04-24 14:01:02 -04:00
Harvey Harrison 0dc47877a3 net: replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-05 20:47:47 -08:00
Trond Myklebust 5d00837b90 SUNRPC: Run rpc timeout functions as callbacks instead of in softirqs
An audit of the current RPC timeout functions shows that they don't really
ever need to run in the softirq context. As long as the softirq is
able to signal that the wakeup is due to a timeout (which it can do by
setting task->tk_status to -ETIMEDOUT) then the callback functions can just
run as standard task->tk_callback functions (in the rpciod/process
context).

The only possible border-line case would be xprt_timer() for the case of
UDP, when the callback is used to reduce the size of the transport
congestion window. In testing, however, the effect of moving that update
to a callback would appear to be minor.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-02-25 21:40:44 -08:00
Linus Torvalds 75659ca0c1 Merge branch 'task_killable' of git://git.kernel.org/pub/scm/linux/kernel/git/willy/misc
* 'task_killable' of git://git.kernel.org/pub/scm/linux/kernel/git/willy/misc: (22 commits)
  Remove commented-out code copied from NFS
  NFS: Switch from intr mount option to TASK_KILLABLE
  Add wait_for_completion_killable
  Add wait_event_killable
  Add schedule_timeout_killable
  Use mutex_lock_killable in vfs_readdir
  Add mutex_lock_killable
  Use lock_page_killable
  Add lock_page_killable
  Add fatal_signal_pending
  Add TASK_WAKEKILL
  exit: Use task_is_*
  signal: Use task_is_*
  sched: Use task_contributes_to_load, TASK_ALL and TASK_NORMAL
  ptrace: Use task_is_*
  power: Use task_is_*
  wait: Use TASK_NORMAL
  proc/base.c: Use task_is_*
  proc/array.c: Use TASK_REPORT
  perfmon: Use task_is_*
  ...

Fixed up conflicts in NFS/sunrpc manually..
2008-02-01 11:45:47 +11:00
Chuck Lever afc881124b SUNRPC: rpcb_getport_sync() passes incorrect address size to rpc_create()
The variable "sin" is a pointer, so sizeof(sin) is the size of a pointer,
not the size of thing that sin points to.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-01-30 02:06:09 -05:00
Chuck Lever 67d6021362 SUNRPC: Clean up block comment preceding rpcb_getport_sync()
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-01-30 02:06:09 -05:00
Chuck Lever f1ec08cb94 SUNRPC: Use appropriate argument types in rpcb client
Clean up: Follow recommendations of Chapter 5 of Documentation/CodingStyle
and use "u32" instead of "__u32" for types in definitions that are not
shared with user space.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-01-30 02:06:09 -05:00
Chuck Lever b91e101fca SUNRPC: rpcb_getport_sync() should use built-in hostname generator
rpc_create() can already fill in the hostname with a string representation
of the server's IP address, so remove redundant logic in in
rpcb_getport_sync() that does that.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-01-30 02:06:09 -05:00