Currently nfs_updatepage allows a write to be extended to cover a full
page only if we don't have a byte range lock lock on the file... but if
we have a write delegation on the file or if we have the whole file
locked for writing then we should be allowed to extend the write as
well.
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
[Trond: fix up call to nfs_have_delegation()]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
During review of the separate project quota inode patches, it became
obvious that the dquot log reservation calculation underestimated
the number dquots that can be modified in a transaction. This has
it's roots way back in the Irix quota implementation.
That is, when quotas were first implemented in XFS, it only
supported user and project quotas as Irix did not have group quotas.
Hence the worst case operation involving dquot modification was
calculated to involve 2 user dquots and 1 project dquot or 1 user
dequot and 2 project dquots. i.e. 3 dquots. This was determined back
in 1996, and has remained unchanged ever since.
However, back in 2001, the Linux XFS port dropped all support for
project quota and implmented group quotas over the top. This was
effectively done with a search-and-replace of project with group,
and as such the log reservation was not changed. However, with the
advent of group quotas, chmod and rename now could modify more than
3 dquots in a single transaction - both could modify 4 dquots. Hence
this log reservation has been wrong for a long time.
In 2005, project quota support was reintroduced into Linux, but it
was implemented to be mutually exclusive to group quotas and so this
didn't add any new changes to the dquot log reservation. Hence when
project quotas were in use (rather than group quotas) the log
reservation was again valid, just like in the Irix days.
Now, with the addition of the separate project quota inode, group
and project quotas are no longer mutually exclusive, and hence
operations can now modify three dquots per inode where previously it
was only two. The worst case here is the rename transaction, which
can allocate/free space on two different directory inodes, and if
they have different uid/gid/prid configurations and are world
writeable, then rename can actually modify 6 different dquots now.
Further, the dquot log reservation doesn't take into account the
space used by the dquot log format structure that precedes the dquot
that is logged, and hence further underestimates the worst case
log space required by dquots during a transaction. This has been
missing since the first commit in 1996.
Hence the worst case log reservation needs to be increased from 3 to
6, and it needs to take into account a log format header for each of
those dquots.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
The conversion from local format to extent format requires
interpretation of the data in the fork being converted, so it cannot
be done in a generic way. It is up to the caller to convert the fork
format to extent format before calling into xfs_bmapi_write() so
format conversion can be done correctly.
The code in xfs_bmapi_write() to convert the format is used
implicitly by the attribute and directory code, but they
specifically zero the fork size so that the conversion does not do
any allocation or manipulation. Move this conversion into the
shortform to leaf functions for the dir/attr code so the conversions
are explicitly controlled by all callers.
Now we can remove the conversion code in xfs_bmapi_write.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Make nfs_readdir revalidate only when we're at the beginning of the directory or
if the cached attributes have expired.
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
NFS: Make nfs_attribute_cache_expired() non-static so we can call it from
nfs_readdir().
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
nfs_prime_dcache currently only sets the verifier when it doesn't
initially a matching dentry in the dcache. Set the verifier in the case
where we do find a dentry in the dcache. This ensures that we don't
have to look up the dentry again if we want to use it after a readdir.
Cc: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Macro get_unused_fd() is used to allocate a file descriptor with
default flags. Those default flags (0) can be "unsafe":
O_CLOEXEC must be used by default to not leak file descriptor
across exec().
Instead of macro get_unused_fd(), functions anon_inode_getfd()
or get_unused_fd_flags() should be used with flags given by userspace.
If not possible, flags should be set to O_CLOEXEC to provide userspace
with a default safe behavor.
In a further patch, get_unused_fd() will be removed so that
new code start using anon_inode_getfd() or get_unused_fd_flags()
with correct flags.
This patch replaces calls to get_unused_fd() with equivalent call to
get_unused_fd_flags(0) to preserve current behavor for existing code.
The hard coded flag value (0) should be reviewed on a per-subsystem basis,
and, if possible, set to O_CLOEXEC.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
There are some unused codes at xfs_bulkstat():
- Variable bp is defined to point to the on-disk inode cluster
buffer, but it proved to be of no practical help.
- We process the chunks of good inodes which were fetched by iterating
btree records from an AG. When processing inodes from each chunk,
the code recomputing agbno if run into the first inode of a cluster,
however, the agbno is not being used thereafter.
This patch tries to clean up those things.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Merge second patch-bomb from Andrew Morton:
- misc fixes
- audit stuff
- fanotify/inotify/dnotify things
- most of the rest of MM. The new cache shrinker code from Glauber and
Dave Chinner probably isn't quite stabilized yet.
- ptrace
- ipc
- partitions
- reboot cleanups
- add LZ4 decompressor, use it for kernel compression
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits)
lib/scatterlist: error handling in __sg_alloc_table()
scsi_debug: fix do_device_access() with wrap around range
crypto: talitos: use sg_pcopy_to_buffer()
lib/scatterlist: introduce sg_pcopy_from_buffer() and sg_pcopy_to_buffer()
lib/scatterlist: factor out sg_miter_get_next_page() from sg_miter_next()
crypto: add lz4 Cryptographic API
lib: add lz4 compressor module
arm: add support for LZ4-compressed kernel
lib: add support for LZ4-compressed kernel
decompressor: add LZ4 decompressor module
lib: add weak clz/ctz functions
reboot: move arch/x86 reboot= handling to generic kernel
reboot: arm: change reboot_mode to use enum reboot_mode
reboot: arm: prepare reboot_mode for moving to generic kernel code
reboot: arm: remove unused restart_mode fields from some arm subarchs
reboot: unicore32: prepare reboot_mode for moving to generic kernel code
reboot: x86: prepare reboot_mode for moving to generic kernel code
reboot: checkpatch.pl the new kernel/reboot.c file
reboot: move shutdown/reboot related functions to kernel/reboot.c
reboot: remove -stable friendly PF_THREAD_BOUND define
...
Pull Ceph updates from Sage Weil:
"There is some follow-on RBD cleanup after the last window's code drop,
a series from Yan fixing multi-mds behavior in cephfs, and then a
sprinkling of bug fixes all around. Some warnings, sleeping while
atomic, a null dereference, and cleanups"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (36 commits)
libceph: fix invalid unsigned->signed conversion for timespec encoding
libceph: call r_unsafe_callback when unsafe reply is received
ceph: fix race between cap issue and revoke
ceph: fix cap revoke race
ceph: fix pending vmtruncate race
ceph: avoid accessing invalid memory
libceph: Fix NULL pointer dereference in auth client code
ceph: Reconstruct the func ceph_reserve_caps.
ceph: Free mdsc if alloc mdsc->mdsmap failed.
ceph: remove sb_start/end_write in ceph_aio_write.
ceph: avoid meaningless calling ceph_caps_revoking if sync_mode == WB_SYNC_ALL.
ceph: fix sleeping function called from invalid context.
ceph: move inode to proper flushing list when auth MDS changes
rbd: fix a couple warnings
ceph: clear migrate seq when MDS restarts
ceph: check migrate seq before changing auth cap
ceph: fix race between page writeback and truncate
ceph: reset iov_len when discarding cap release messages
ceph: fix cap release race
libceph: fix truncate size calculation
...
Pull btrfs update from Chris Mason:
"These are the usual mixture of bugs, cleanups and performance fixes.
Miao has some really nice tuning of our crc code as well as our
transaction commits.
Josef is peeling off more and more problems related to early enospc,
and has a number of important bug fixes in here too"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (81 commits)
Btrfs: wait ordered range before doing direct io
Btrfs: only do the tree_mod_log_free_eb if this is our last ref
Btrfs: hold the tree mod lock in __tree_mod_log_rewind
Btrfs: make backref walking code handle skinny metadata
Btrfs: fix crash regarding to ulist_add_merge
Btrfs: fix several potential problems in copy_nocow_pages_for_inode
Btrfs: cleanup the code of copy_nocow_pages_for_inode()
Btrfs: fix oops when recovering the file data by scrub function
Btrfs: make the chunk allocator completely tree lockless
Btrfs: cleanup orphaned root orphan item
Btrfs: fix wrong mirror number tuning
Btrfs: cleanup redundant code in btrfs_submit_direct()
Btrfs: remove btrfs_sector_sum structure
Btrfs: check if we can nocow if we don't have data space
Btrfs: stop using try_to_writeback_inodes_sb_nr to flush delalloc
Btrfs: use a percpu to keep track of possibly pinned bytes
Btrfs: check for actual acls rather than just xattrs when caching no acl
Btrfs: move btrfs_truncate_page to btrfs_cont_expand instead of btrfs_truncate
Btrfs: optimize reada_for_balance
Btrfs: optimize read_block_for_search
...
Suggested by Linus:
Changed time accounting for busy-poll:
- Make it microsecond based.
- Use unsigned longs.
- Revert back to use time_after instead of time_in_range.
Reorder poll/select busy loop conditions:
- Clear busy_flag after one time we can't busy-poll.
- Only init busy_end if we actually are going to busy-poll.
Added one more missing need_resched() test.
Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- part of the work to allow project quotas and group quotas to
be used together
- inode change count
- inode create transaction
- block queue plugging in buffer readahead and bulkstat
- ordered log vector support
- removal of dead code in and around xfs_sync_inode_grab,
xfs_ialloc_get_rec, XFS_MOUNT_RETERR, XFS_ALLOCFREE_LOG_RES,
XFS_DIROP_LOG_RES, xfs_chash, ctl_table, and xfs_growfs_data_private
- don't keep silent if sunit/swidth can not be changed via mount
- fix a leak of remote symlink blocks into the filesystem when
xattrs are used on symlinks
- fix for fiemap to return FIEMAP_EXTENT_UNKOWN flag on delay extents
- part of a fix for xfs_fsr
- disable speculative preallocation with small files
- performance improvements for inode creates and deletes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
iQIcBAABAgAGBQJR3F9pAAoJENaLyazVq6ZOiKAP/jyfPbVj5AOiLVtTLhJUQ3Qf
urCiMjl87BToixFxa/yxeOBrUbBiOgUQ/2om4b5cryYhN2RtQWiEi/iVdeBZw3rR
1J6VxH09R25GVRobIj2AwJ87eXyqKvi2DaVBrQbgva0BH8fmWKhQISfwLTPUIXcK
GTrVpS1amTWxh69/5p5bxaxo4u2y7DbZwYC4xQOcPeSrfxizMQmN2JqtUjtLDyKp
J08Md04vNcxJvfbFopcSFAncStIr6xnKMiaqvFttybLJf9HL9MqoaO9Xp+6aX1QI
Pibae3oFctH1tGOmjgyg30AbPjzAHaGDSw9vuRaommQZbMwiZXAV2VGuJ5QWtAbi
wXh5GIzaap1Z0EYuD9qY0hsFizOpmL+1YH+F20qIqa3i5CiDMeYMWlmzhfN63zH9
Zk2j1YUkbxLmKMEgl8s++eLfT1yenuzVAp5zUodApOPp161FOMJlVhhD55WDvKtP
2/3Ig25fz5CLwcIZT1MoZ9B7UP9dfrAAK30AcUmO3Iumj6b8bsxh4pzSpJ02U1cG
cMIe+OhxC6KqDZlXeLmDXodnOo9Wc4glwdivcynxCNFv6WS5Ez/ufm+4oN+OVUo7
PwyNtoJfsptSYZyIRorXNez54ww3cOvvqjifUasTZTGkTSqCbf1LclzuMxcXDlyO
3YzE/DCK8ZWwJc/ysbn/
=v6KW
-----END PGP SIGNATURE-----
Merge tag 'for-linus-v3.11-rc1' of git://oss.sgi.com/xfs/xfs
Pull xfs update from Ben Myers:
"This includes several bugfixes, part of the work for project quotas
and group quotas to be used together, performance improvements for
inode creation/deletion, buffer readahead, and bulkstat,
implementation of the inode change count, an inode create transaction,
and the removal of a bunch of dead code.
There are also some duplicate commits that you already have from the
3.10-rc series.
- part of the work to allow project quotas and group quotas to be
used together
- inode change count
- inode create transaction
- block queue plugging in buffer readahead and bulkstat
- ordered log vector support
- removal of dead code in and around xfs_sync_inode_grab,
xfs_ialloc_get_rec, XFS_MOUNT_RETERR, XFS_ALLOCFREE_LOG_RES,
XFS_DIROP_LOG_RES, xfs_chash, ctl_table, and
xfs_growfs_data_private
- don't keep silent if sunit/swidth can not be changed via mount
- fix a leak of remote symlink blocks into the filesystem when xattrs
are used on symlinks
- fix for fiemap to return FIEMAP_EXTENT_UNKOWN flag on delay extents
- part of a fix for xfs_fsr
- disable speculative preallocation with small files
- performance improvements for inode creates and deletes"
* tag 'for-linus-v3.11-rc1' of git://oss.sgi.com/xfs/xfs: (61 commits)
xfs: Remove incore use of XFS_OQUOTA_ENFD and XFS_OQUOTA_CHKD
xfs: Change xfs_dquot_acct to be a 2-dimensional array
xfs: Code cleanup and removal of some typedef usage
xfs: Replace macro XFS_DQ_TO_QIP with a function
xfs: Replace macro XFS_DQUOT_TREE with a function
xfs: Define a new function xfs_is_quota_inode()
xfs: implement inode change count
xfs: Use inode create transaction
xfs: Inode create item recovery
xfs: Inode create transaction reservations
xfs: Inode create log items
xfs: Introduce an ordered buffer item
xfs: Introduce ordered log vector support
xfs: xfs_ifree doesn't need to modify the inode buffer
xfs: don't do IO when creating an new inode
xfs: don't use speculative prealloc for small files
xfs: plug directory buffer readahead
xfs: add pluging for bulkstat readahead
xfs: Remove dead function prototype xfs_sync_inode_grab()
xfs: Remove the left function variable from xfs_ialloc_get_rec()
...
Feature highlights include:
- Add basic client support for NFSv4.2
- Add basic client support for Labeled NFS (selinux for NFSv4.2)
- Fix the use of credentials in NFSv4.1 stateful operations, and
add support for NFSv4.1 state protection.
Bugfix highlights:
- Fix another NFSv4 open state recovery race
- Fix an NFSv4.1 back channel session regression
- Various rpc_pipefs races
- Fix another issue with NFSv3 auth negotiation
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)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=wGjn
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-3.11-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Feature highlights include:
- Add basic client support for NFSv4.2
- Add basic client support for Labeled NFS (selinux for NFSv4.2)
- Fix the use of credentials in NFSv4.1 stateful operations, and add
support for NFSv4.1 state protection.
Bugfix highlights:
- Fix another NFSv4 open state recovery race
- Fix an NFSv4.1 back channel session regression
- Various rpc_pipefs races
- Fix another issue with NFSv3 auth negotiation
Please note that Labeled NFS does require some additional support from
the security subsystem. The relevant changesets have all been
reviewed and acked by James Morris."
* tag 'nfs-for-3.11-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (54 commits)
NFS: Set NFS_CS_MIGRATION for NFSv4 mounts
NFSv4.1 Refactor nfs4_init_session and nfs4_init_channel_attrs
nfs: have NFSv3 try server-specified auth flavors in turn
nfs: have nfs_mount fake up a auth_flavs list when the server didn't provide it
nfs: move server_authlist into nfs_try_mount_request
nfs: refactor "need_mount" code out of nfs_try_mount
SUNRPC: PipeFS MOUNT notification optimization for dying clients
SUNRPC: split client creation routine into setup and registration
SUNRPC: fix races on PipeFS UMOUNT notifications
SUNRPC: fix races on PipeFS MOUNT notifications
NFSv4.1 use pnfs_device maxcount for the objectlayout gdia_maxcount
NFSv4.1 use pnfs_device maxcount for the blocklayout gdia_maxcount
NFSv4.1 Fix gdia_maxcount calculation to fit in ca_maxresponsesize
NFS: Improve legacy idmapping fallback
NFSv4.1 end back channel session draining
NFS: Apply v4.1 capabilities to v4.2
NFSv4.1: Clean up layout segment comparison helper names
NFSv4.1: layout segment comparison helpers should take 'const' parameters
NFSv4: Move the DNS resolver into the NFSv4 module
rpc_pipefs: only set rpc_dentry_ops if d_op isn't already set
...
Pull ext3 fix and quota cleanup from Jan Kara:
"A fix of ext3 error reporting from fsync and a quota cleanup"
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
quota: Convert use of typedef ctl_table to struct ctl_table
ext3: Fix fsync error handling after filesystem abort.
Pull third set of VFS updates from Al Viro:
"Misc stuff all over the place. There will be one more pile in a
couple of days"
This is an "evil merge" that also uses the new d_count helper in
fs/configfs/dir.c, missed by commit 84d08fa888 ("helper for reading
->d_count")
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ncpfs: fix error return code in ncp_parse_options()
locks: move file_lock_list to a set of percpu hlist_heads and convert file_lock_lock to an lglock
seq_file: add seq_list_*_percpu helpers
f2fs: fix readdir incorrectness
mode_t whack-a-mole...
lustre: kill the pointless wrapper
helper for reading ->d_count
XFS_BROOT_SIZE_ADJ is an undocumented macro which accounts for
the difference in size between the on-disk and in-core btree
root. It's much clearer to just use the newly-added
XFS_BMAP_BMDR_SPACE macro which gives us the on-disk size
directly.
In one case, we must test that the if_broot exists before
applying the macro, however.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
This patch, originally from Android kernel, adds vfat ioctl command
FAT_IOCTL_GET_VOLUME_ID, with this command we can get the vfat volume ID
using following code:
ioctl(fd, FAT_IOCTL_GET_VOLUME_ID, &volume_ID)
This patch is a modified version of the patch by Mike Lockwood, with
changes from Dmitry Pervushin, who noticed the original patch makes some
volume IDs abiguous with error returns: for example, if volume id is
0xFFFFFDAD, that matches -ENOIOCTLCMD, we get "FFFFFFFF" from the user
space.
So add a parameter to ioctl to get the correct volume ID.
Android uses vfat volume ID to identify different sd card, when a new sd
card is inserted to device, android can scan the media on it and pop up
new contents.
Signed-off-by: Bintian Wang <bintian.wang@linaro.org>
Cc: dmitry pervushin <dpervushin@gmail.com>
Cc: Mike Lockwood <lockwood@android.com>
Cc: Colin Cross <ccross@android.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Sean McNeil <sean@mcneil.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix to return -EINVAL from the option parse error handling case instead
of 0, as done elsewhere in this function.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: Petr Vandrovec <petr@vandrovec.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After commit 839a8e8660 ("writeback: replace custom worker pool
implementation with unbound workqueue"), bdi_writeback_workfn runs off
bdi_writeback->dwork, on each execution, it processes bdi->work_list and
reschedules if there are more things to do instead of flush any work
that race with us existing. It is unecessary to check force_wait in
wb_do_writeback since it is always 0 after the mentioned commit. This
patch remove the force_wait in wb_do_writeback.
Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It's not used globally and could be static.
Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There have been changes in the locking scheme of fsnotify but the
comments in the source code have not been updated yet. This patch
corrects this.
Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In inotify_new_watch() the number of watches for a group is compared
against the max number of allowed watches and increased afterwards. The
check and incrementation is not done atomically, so it is possible for
multiple concurrent threads to pass the check and increment the number
of marks above the allowed max.
This patch uses an inotify groups mark_lock to ensure that both check
and incrementation are done atomic. Furthermore we dont have to worry
about the race that allows a concurrent thread to add a watch just after
inotify_update_existing_watch() returned with -ENOENT anymore, since
this is also synchronized by the groups mark mutex now.
Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is no need to use a special mutex to protect against the
fcntl/close race (see dnotify.c for a description of this race).
Instead the dnotify_groups mark mutex can be used.
Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The code under the groups mark_mutex in fanotify_add_inode_mark() and
fanotify_add_vfsmount_mark() is almost identical. So put it into a
seperate function.
Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For both adding an event to an existing mark and destroying a mark we
first have to find it via fsnotify_find_[inode|vfsmount]_mark(). But
getting the mark and adding an event (or destroying it) is not done
atomically. This opens a race where a thread is about to destroy a mark
while another thread still finds the same mark and adds an event to its
mask although it will be destroyed.
Another race exists concerning the excess of a groups number of marks
limit: When a mark is added the number of group marks is checked against
the max number of marks per group and increased afterwards. Since check
and increment is also not done atomically, this may result in 2 or more
processes passing the check at the same time and increasing the number
of group marks above the allowed limit.
With this patch both races are avoided by doing the concerning
operations with the groups mark mutex locked.
Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The ->reserved field isn't cleared so we leak one byte of stack
information to userspace.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rename functions in include/net/ll_poll.h to busy wait.
Clarify documentation about expected power use increase.
Rename POLL_LL to POLL_BUSY_LOOP.
Add need_resched() testing to poll/select busy loops.
Note, that in select and poll can_busy_poll is dynamic and is
updated continuously to reflect the existence of supported
sockets with valid queue information.
Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We now have minimal minorversion 1 support; turn it on by default.
This can still be turned off with "echo -4.1 >/proc/fs/nfsd/versions".
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
RFC 5661 allows a client to destroy a session using a compound
associated with the destroyed session, as long as the DESTROY_SESSION op
is the last op of the compound.
We attempt to allow this, but testing against a Solaris client (which
does destroy sessions in this way) showed that we were failing the
DESTROY_SESSION with NFS4ERR_DELAY, because we assumed the reference
count on the session (held by us) represented another rpc in progress
over this session.
Fix this by noting that in this case the expected reference count is 1,
not 0.
Also, note as long as the session holds a reference to the compound
we're destroying, we can't free it here--instead, delay the free till
the final put in nfs4svc_encode_compoundres.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Fix to return -EINVAL from the option parse error handling
case instead of 0, as done elsewhere in this function.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The file_lock_list is only used for /proc/locks. The vastly common case
is for locks to be put onto the list and come off again, without ever
being traversed.
Help optimize for this use-case by moving to percpu hlist_head-s. At the
same time, we can make the locking less contentious by moving to an
lglock. When iterating over the lists for /proc/locks, we must take the
global lock and then iterate over each CPU's list in turn.
This change necessitates a new fl_link_cpu field to keep track of which
CPU the entry is on. On x86_64 at least, this field is placed within an
existing hole in the struct to avoid growing the size.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
When we convert the file_lock_list to a set of percpu lists, we'll need
a way to iterate over them in order to output /proc/locks info. Add
some seq_list_*_percpu helpers to handle that.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
In the previous Al Viro's readdir patch set, there occurs a bug when
running
xfstest: 006 as follows.
[Error output]
alpha size = 4, name length = 6, total files = 4096, nproc=1
1023 files created
rm: cannot remove `/mnt/f2fs/permname.15150/a': Directory not empty
[Correct output]
alpha size = 4, name length = 6, total files = 4096, nproc=1
4097 files created
This bug is due to the misupdate of directory position in ctx.
So, this patch fixes this.
[AV: fixed a braino]
CC: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Delete the unused variable "err" in v9fs_vfs_getattr()
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Allow requests for security.* and trusted.* xattr name spaces
to pass through to server.
The new files are 99% cut and paste from fs/9p/xattr_user.c with the
namespaces changed. It has the intended effect in superficial testing.
I do not know much detail about how these namespaces are used, but passing
them through to the server, which can decide whether to handle them or not,
seems reasonable.
I want to support a use case where an ext4 file system is mounted via 9P,
then re-exported via samba to windows clients in a cluster. Windows wants
to store xattrs such as security.NTACL. This works when ext4 directly
backs samba, but not when 9P is inserted. This use case is documented here:
http://code.google.com/p/diod/issues/detail?id=95
Signed-off-by: Jim Garlick <garlick@llnl.gov>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Pull timer core updates from Thomas Gleixner:
"The timer changes contain:
- posix timer code consolidation and fixes for odd corner cases
- sched_clock implementation moved from ARM to core code to avoid
duplication by other architectures
- alarm timer updates
- clocksource and clockevents unregistration facilities
- clocksource/events support for new hardware
- precise nanoseconds RTC readout (Xen feature)
- generic support for Xen suspend/resume oddities
- the usual lot of fixes and cleanups all over the place
The parts which touch other areas (ARM/XEN) have been coordinated with
the relevant maintainers. Though this results in an handful of
trivial to solve merge conflicts, which we preferred over nasty cross
tree merge dependencies.
The patches which have been committed in the last few days are bug
fixes plus the posix timer lot. The latter was in akpms queue and
next for quite some time; they just got forgotten and Frederic
collected them last minute."
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (59 commits)
hrtimer: Remove unused variable
hrtimers: Move SMP function call to thread context
clocksource: Reselect clocksource when watchdog validated high-res capability
posix-cpu-timers: don't account cpu timer after stopped thread runtime accounting
posix_timers: fix racy timer delta caching on task exit
posix-timers: correctly get dying task time sample in posix_cpu_timer_schedule()
selftests: add basic posix timers selftests
posix_cpu_timers: consolidate expired timers check
posix_cpu_timers: consolidate timer list cleanups
posix_cpu_timer: consolidate expiry time type
tick: Sanitize broadcast control logic
tick: Prevent uncontrolled switch to oneshot mode
tick: Make oneshot broadcast robust vs. CPU offlining
x86: xen: Sync the CMOS RTC as well as the Xen wallclock
x86: xen: Sync the wallclock when the system time is set
timekeeping: Indicate that clock was set in the pvclock gtod notifier
timekeeping: Pass flags instead of multiple bools to timekeeping_update()
xen: Remove clock_was_set() call in the resume path
hrtimers: Support resuming with two or more CPUs online (but stopped)
timer: Fix jiffies wrap behavior of round_jiffies_common()
...
The loop in mpage_map_and_submit_extent() is guaranteed to always run
at least once since the caller of mpage_map_and_submit_extent() makes
sure map->m_len > 0. So make that explicit using do-while instead of
pure while which also silences the compiler warning about
uninitialized 'err' variable.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks into timers/core
Frederic sayed: "Most of these patches have been hanging around for
several month now, in -mmotm for a significant chunk. They already
missed a few releases."
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Certain servers may not set the NumberOfLinks field in query file/path
info responses. In such a case, cifs_inode_needs_reval() assumes that
all regular files are hardlinks and triggers revalidation, leading to
excessive and unnecessary network traffic.
This change hardcodes cf_nlink (and subsequently i_nlink) when not
returned by the server, similar to what already occurs in cifs_mkdir().
Cc: <stable@vger.kernel.org>
Signed-off-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Steve French <smfrench@gmail.com>
Updated patch to try to prevent allocation of cifs, smb2 or smb3 crypto
secmech structures unless needed. Currently cifs allocates all crypto
mechanisms when the first session is established (4 functions and
4 contexts), rather than only allocating these when needed (smb3 needs
two, the rest of the dialects only need one).
Acked-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Pull trivial tree updates from Jiri Kosina:
"The usual stuff from trivial tree"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits)
treewide: relase -> release
Documentation/cgroups/memory.txt: fix stat file documentation
sysctl/net.txt: delete reference to obsolete 2.4.x kernel
spinlock_api_smp.h: fix preprocessor comments
treewide: Fix typo in printk
doc: device tree: clarify stuff in usage-model.txt.
open firmware: "/aliasas" -> "/aliases"
md: bcache: Fixed a typo with the word 'arithmetic'
irq/generic-chip: fix a few kernel-doc entries
frv: Convert use of typedef ctl_table to struct ctl_table
sgi: xpc: Convert use of typedef ctl_table to struct ctl_table
doc: clk: Fix incorrect wording
Documentation/arm/IXP4xx fix a typo
Documentation/networking/ieee802154 fix a typo
Documentation/DocBook/media/v4l fix a typo
Documentation/video4linux/si476x.txt fix a typo
Documentation/virtual/kvm/api.txt fix a typo
Documentation/early-userspace/README fix a typo
Documentation/video4linux/soc-camera.txt fix a typo
lguest: fix CONFIG_PAE -> CONFIG_x86_PAE in comment
...
Merge hpfs patches from Mikulas Patocka.
* emailed patches from Mikulas Patocka <mpatocka@artax.karlin.mff.cuni.cz>:
hpfs: implement prefetch to improve performance
hpfs: use mpage
hpfs: better test for errors
This patch implements prefetch to improve performance. It helps mostly
when scanning the bitmaps to calculate free space.
Signed-off-by: Mikulas Patocka <mpatocka@artax.karlin.mff.cuni.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use the mpage interface to improve performance.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The test if bitmap access is out of bound could errorneously pass if the
device size is divisible by 16384 sectors and we are asking for one bitmap
after the end.
Check for invalid size in the superblock. Invalid size could cause integer
overflows in the rest of the code.
Signed-off-by: Mikulas Patocka <mpatocka@artax.karlin.mff.cuni.cz>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull powerpc updates from Ben Herrenschmidt:
"This is the powerpc changes for the 3.11 merge window. In addition to
the usual bug fixes and small updates, the main highlights are:
- Support for transparent huge pages by Aneesh Kumar for 64-bit
server processors. This allows the use of 16M pages as transparent
huge pages on kernels compiled with a 64K base page size.
- Base VFIO support for KVM on power by Alexey Kardashevskiy
- Wiring up of our nvram to the pstore infrastructure, including
putting compressed oopses in there by Aruna Balakrishnaiah
- Move, rework and improve our "EEH" (basically PCI error handling
and recovery) infrastructure. It is no longer specific to pseries
but is now usable by the new "powernv" platform as well (no
hypervisor) by Gavin Shan.
- I fixed some bugs in our math-emu instruction decoding and made it
usable to emulate some optional FP instructions on processors with
hard FP that lack them (such as fsqrt on Freescale embedded
processors).
- Support for Power8 "Event Based Branch" facility by Michael
Ellerman. This facility allows what is basically "userspace
interrupts" for performance monitor events.
- A bunch of Transactional Memory vs. Signals bug fixes and HW
breakpoint/watchpoint fixes by Michael Neuling.
And more ... I appologize in advance if I've failed to highlight
something that somebody deemed worth it."
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (156 commits)
pstore: Add hsize argument in write_buf call of pstore_ftrace_call
powerpc/fsl: add MPIC timer wakeup support
powerpc/mpic: create mpic subsystem object
powerpc/mpic: add global timer support
powerpc/mpic: add irq_set_wake support
powerpc/85xx: enable coreint for all the 64bit boards
powerpc/8xx: Erroneous double irq_eoi() on CPM IRQ in MPC8xx
powerpc/fsl: Enable CONFIG_E1000E in mpc85xx_smp_defconfig
powerpc/mpic: Add get_version API both for internal and external use
powerpc: Handle both new style and old style reserve maps
powerpc/hw_brk: Fix off by one error when validating DAWR region end
powerpc/pseries: Support compression of oops text via pstore
powerpc/pseries: Re-organise the oops compression code
pstore: Pass header size in the pstore write callback
powerpc/powernv: Fix iommu initialization again
powerpc/pseries: Inform the hypervisor we are using EBB regs
powerpc/perf: Add power8 EBB support
powerpc/perf: Core EBB support for 64-bit book3s
powerpc/perf: Drop MMCRA from thread_struct
powerpc/perf: Don't enable if we have zero events
...
If filesystem was aborted we will return success
due to (sb->s_flags & MS_RDONLY) which is incorrect and
results in data loss.
In order to handle fs abort correctly we have to check
fs state once we discover that it is in MS_RDONLY state
Test case: http://patchwork.ozlabs.org/patch/244297/
Changes from V1:
- fix spelling
- fix smp_rmb()/debug order
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Merge first patch-bomb from Andrew Morton:
- various misc bits
- I'm been patchmonkeying ocfs2 for a while, as Joel and Mark have been
distracted. There has been quite a bit of activity.
- About half the MM queue
- Some backlight bits
- Various lib/ updates
- checkpatch updates
- zillions more little rtc patches
- ptrace
- signals
- exec
- procfs
- rapidio
- nbd
- aoe
- pps
- memstick
- tools/testing/selftests updates
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (445 commits)
tools/testing/selftests: don't assume the x bit is set on scripts
selftests: add .gitignore for kcmp
selftests: fix clean target in kcmp Makefile
selftests: add .gitignore for vm
selftests: add hugetlbfstest
self-test: fix make clean
selftests: exit 1 on failure
kernel/resource.c: remove the unneeded assignment in function __find_resource
aio: fix wrong comment in aio_complete()
drivers/w1/slaves/w1_ds2408.c: add magic sequence to disable P0 test mode
drivers/memstick/host/r592.c: convert to module_pci_driver
drivers/memstick/host/jmb38x_ms: convert to module_pci_driver
pps-gpio: add device-tree binding and support
drivers/pps/clients/pps-gpio.c: convert to module_platform_driver
drivers/pps/clients/pps-gpio.c: convert to devm_* helpers
drivers/parport/share.c: use kzalloc
Documentation/accounting/getdelays.c: avoid strncpy in accounting tool
aoe: update internal version number to v83
aoe: update copyright date
aoe: perform I/O completions in parallel
...
924b42d5 ("Use boot based time for process start time and boot time in
/proc") updated copy_process/do_task_stat but forgot about de_thread().
This breaks "ps axOT" if a sub-thread execs.
Note: I think that task->start_time should die.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Tomas Janousek <tjanouse@redhat.com>
Cc: Tomas Smetana <tsmetana@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Trivial cleanup. do_execve_common() can use current_user() and avoid the
unnecessary "struct cred *cred" var.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For NUL terminated string, set '\0' at the end.
Signed-off-by: Zhao Hongjiang <zhaohongjiang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Change uptime_proc_show() to use get_monotonic_boottime() instead of
do_posix_clock_monotonic_gettime() + monotonic_to_bootbased().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Tomas Janousek <tjanouse@redhat.com>
Cc: Tomas Smetana <tsmetana@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
de_thread() can use change_pid() instead of detach + attach. This looks
better and this ensures that, say, next_thread() can never see a task with
->pid == NULL.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Sergey Dyasly <dserrg@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
"goto end" should not bypass the "Backward compatibility with
core_uses_pid" code, move this label up.
While at it,
- It is ugly to copy '|' into cn->corename and then inc
the pointer for argv_split().
Change format_corename() to increment pat_ptr instead.
- Remove the dead "if (*pat_ptr == 0)" in format_corename(),
we already checked it is not zero.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Colin Walters <walters@verbum.org>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Cc: Lucas De Marchi <lucas.de.marchi@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Imho, "atomic_t call_count" is ugly and should die. It buys nothing and
in fact it can grow more than necessary, expand doesn't check if it was
already incremented by another task.
Kill it, and introduce "static int core_name_size" updated by
expand_corename(). This is obviously racy too but harmless, and
core_name_size never grows for no reason.
We do not bother to to calculate the "right" new size, we simply do
kmalloc(size_we_need) and use ksize() to rely on kmalloc_index's decision.
Finally change format_corename() to use expand_corename(), krealloc(NULL)
is fine.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Colin Walters <walters@verbum.org>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Cc: Lucas De Marchi <lucas.de.marchi@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The usage of cn_escape() looks really annoying, imho this sequence needs a
wrapper. And it is buggy. If cn_printf() does expand_corename()
cn_escape() writes to the freed memory.
Introduce cn_esc_printf() which hopefully does this all right. It records
the index before cn_vprintf(), not "char *" which is no longer valid (in
general) after krealloc().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Colin Walters <walters@verbum.org>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Cc: Lucas De Marchi <lucas.de.marchi@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
cn_vprintf() looks really overcomplicated and sub-optimal. We do not need
vsnprintf(NULL) to calculate the size we need, we can simply try to print
into the current buffer and expand/retry only if necessary.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Colin Walters <walters@verbum.org>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Cc: Lucas De Marchi <lucas.de.marchi@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Turn cn_printf(...) into cn_vprintf(va_list args), reintroduce
cn_printf() as a trivial wrapper.
This simplifies the next change and cn_vprintf() will have more
callers.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Colin Walters <walters@verbum.org>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Cc: Lucas De Marchi <lucas.de.marchi@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
do_coredump() assumes that format_corename() can only fail if
expand_corename() fails and frees cn->corename. This is not true, for
example cn_print_exe_file() can fail and in this case nobody frees
cn->corename.
Change do_coredump() to always do kfree(cn->corename) after it calls
format_corename() (NULL is fine), change expand_corename() to do nothing
if kmalloc() fails.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Colin Walters <walters@verbum.org>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Cc: Lucas De Marchi <lucas.de.marchi@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
sigprocmask() should die. None of the current callers actually
need this strange interface.
Change fs/eventpoll.c to use set_current_blocked(). This also
means we should not worry about SIGKILL/SIGSTOP.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Eric Wong <normalperson@yhbt.net>
Cc: Jason Baron <jbaron@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The cp_inodes_count and cp_blocks_count are represented as __le64 type in
on-disk structure (struct nilfs_checkpoint). But analogous fields in
in-core structure (struct nilfs_root) are represented by atomic_t type.
This patch replaces atomic_t on atomic64_t type in representation of
inodes_count and blocks_count fields in struct nilfs_root.
Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Acked-by: Joern Engel <joern@logfs.org>
Cc: Clemens Eisserer <linuxhippy@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, NILFS2 returns 0 as free inodes count (f_ffree) and current
used inodes count as total file nodes in file system (f_files):
df -i
Filesystem Inodes IUsed IFree IUse% Mounted on
/dev/loop0 2 2 0 100% /mnt/nilfs2
This patch implements real calculation of free inodes count. First of
all, it is calculated total file nodes in file system as
(desc_blocks_count * groups_per_desc_block * entries_per_group). Then, it
is calculated free inodes count as difference the total file nodes and
used inodes count. As a result, we have such output for NILFS2:
df -i
Filesystem Inodes IUsed IFree IUse% Mounted on
/dev/loop0 4194304 2114701 2079603 51% /mnt/nilfs2
Reported-by: Clemens Eisserer <linuxhippy@gmail.com>
Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Tested-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Cc: Joern Engel <joern@logfs.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Calling kthread_run with a single name parameter causes it to be handled
as a format string. Many callers are passing potentially dynamic string
content, so use "%s" in those cases to avoid any potential accidents.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix various weird constructions of strncpy(dst, src, strlen(src)).
Length limits should be about the space available in the destination,
not repurposed as a method to either always include or always exclude a
trailing NULL byte. Either the NULL should always be copied (using
strlcpy), or it should not be copied (using something like memcpy).
Readable code should not depend on the weird behavior of strncpy when it
hits the length limit. Better to avoid the anti-pattern entirely.
[akpm@linux-foundation.org: revert getdelays.c part due to missing bsd/string.h]
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [staging]
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [acpi]
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ursula Braun <ursula.braun@de.ibm.com>
Cc: Frank Blaschka <blaschka@linux.vnet.ibm.com>
Cc: Richard Weinberger <richard@nod.at>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The global variable num_physpages is scheduled to be removed, so use
totalram_pages instead of num_physpages at runtime.
Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: James Morris <jmorris@namei.org>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: Patrick McHardy <kaber@trash.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that the LRU to add a page to is decided at LRU-add time, remove the
misleading lru parameter from __pagevec_lru_add. A consequence of this
is that the pagevec_lru_add_file, pagevec_lru_add_anon and similar
helpers are misleading as the caller no longer has direct control over
what LRU the page is added to. Unused helpers are removed by this patch
and existing users of pagevec_lru_add_file() are converted to use
lru_cache_add_file() directly and use the per-cpu pagevecs instead of
creating their own pagevec.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Alexey Lyahkov <alexey.lyashkov@gmail.com>
Cc: Andrew Perepechko <anserper@ya.ru>
Cc: Robin Dong <sanbai@taobao.com>
Cc: Theodore Tso <tytso@mit.edu>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Bernd Schubert <bernd.schubert@fastmail.fm>
Cc: David Howells <dhowells@redhat.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch introduces mmap_vmcore().
Don't permit writable nor executable mapping even with mprotect()
because this mmap() is aimed at reading crash dump memory. Non-writable
mapping is also requirement of remap_pfn_range() when mapping linear
pages on non-consecutive physical pages; see is_cow_mapping().
Set VM_MIXEDMAP flag to remap memory by remap_pfn_range and by
remap_vmalloc_range_pertial at the same time for a single vma.
do_munmap() can correctly clean partially remapped vma with two
functions in abnormal case. See zap_pte_range(), vm_normal_page() and
their comments for details.
On x86-32 PAE kernels, mmap() supports at most 16TB memory only. This
limitation comes from the fact that the third argument of
remap_pfn_range(), pfn, is of 32-bit length on x86-32: unsigned long.
[akpm@linux-foundation.org: use min(), switch to conventional error-unwinding approach]
Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp>
Cc: Lisa Mitchell <lisa.mitchell@hp.com>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Tested-by: Maxim Uvarov <muvarov@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The previous patches newly added holes before each chunk of memory and
the holes need to be count in vmcore file size. There are two ways to
count file size in such a way:
1) suppose m is a poitner to the last vmcore object in vmcore_list.
Then file size is (m->offset + m->size), or
2) calculate sum of size of buffers for ELF header, program headers,
ELF note segments and objects in vmcore_list.
Although 1) is more direct and simpler than 2), 2) seems better in that
it reflects internal object structure of /proc/vmcore. Thus, this patch
changes get_vmcore_size_elf{64, 32} so that it calculates size in the
way of 2).
As a result, both get_vmcore_size_elf{64, 32} have the same definition.
Merge them as get_vmcore_size.
Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp>
Cc: Lisa Mitchell <lisa.mitchell@hp.com>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now ELF note segment has been copied in the buffer on vmalloc memory.
To allow user process to remap the ELF note segment buffer with
remap_vmalloc_page, the corresponding VM area object has to have
VM_USERMAP flag set.
[akpm@linux-foundation.org: use the conventional comment layout]
Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp>
Cc: Lisa Mitchell <lisa.mitchell@hp.com>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The reasons why we don't allocate ELF note segment in the 1st kernel
(old memory) on page boundary is to keep backward compatibility for old
kernels, and that if doing so, we waste not a little memory due to
round-up operation to fit the memory to page boundary since most of the
buffers are in per-cpu area.
ELF notes are per-cpu, so total size of ELF note segments depends on
number of CPUs. The current maximum number of CPUs on x86_64 is 5192,
and there's already system with 4192 CPUs in SGI, where total size
amounts to 1MB. This can be larger in the near future or possibly even
now on another architecture that has larger size of note per a single
cpu. Thus, to avoid the case where memory allocation for large block
fails, we allocate vmcore objects on vmalloc memory.
This patch adds elfnotes_buf and elfnotes_sz variables to keep pointer
to the ELF note segment buffer and its size. There's no longer the
vmcore object that corresponds to the ELF note segment in vmcore_list.
Accordingly, read_vmcore() has new case for ELF note segment and
set_vmcore_list_offsets_elf{64,32}() and other helper functions starts
calculating offset from sum of size of ELF headers and size of ELF note
segment.
[akpm@linux-foundation.org: use min(), fix error-path vzalloc() leaks]
Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp>
Cc: Lisa Mitchell <lisa.mitchell@hp.com>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Treat memory chunks referenced by PT_LOAD program header entries in
page-size boundary in vmcore_list. Formally, for each range [start,
end], we set up the corresponding vmcore object in vmcore_list to
[rounddown(start, PAGE_SIZE), roundup(end, PAGE_SIZE)].
This change affects layout of /proc/vmcore. The gaps generated by the
rearrangement are newly made visible to applications as holes.
Concretely, they are two ranges [rounddown(start, PAGE_SIZE), start] and
[end, roundup(end, PAGE_SIZE)].
Suppose variable m points at a vmcore object in vmcore_list, and
variable phdr points at the program header of PT_LOAD type the variable
m corresponds to. Then, pictorially:
m->offset +---------------+
| hole |
phdr->p_offset = +---------------+
m->offset + (paddr - start) | |\
| kernel memory | phdr->p_memsz
| |/
+---------------+
| hole |
m->offset + m->size +---------------+
where m->offset and m->offset + m->size are always page-size aligned.
Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp>
Cc: Lisa Mitchell <lisa.mitchell@hp.com>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Allocate ELF headers on page-size boundary using __get_free_pages()
instead of kmalloc().
Later patch will merge PT_NOTE entries into a single unique one and
decrease the buffer size actually used. Keep original buffer size in
variable elfcorebuf_sz_orig to kfree the buffer later and actually used
buffer size with rounded up to page-size boundary in variable
elfcorebuf_sz separately.
The size of part of the ELF buffer exported from /proc/vmcore is
elfcorebuf_sz.
The merged, removed PT_NOTE entries, i.e. the range [elfcorebuf_sz,
elfcorebuf_sz_orig], is filled with 0.
Use size of the ELF headers as an initial offset value in
set_vmcore_list_offsets_elf{64,32} and
process_ptload_program_headers_elf{64,32} in order to indicate that the
offset includes the holes towards the page boundary.
As a result, both set_vmcore_list_offsets_elf{64,32} have the same
definition. Merge them as set_vmcore_list_offsets.
[akpm@linux-foundation.org: add free_elfcorebuf(), cleanups]
Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp>
Cc: Lisa Mitchell <lisa.mitchell@hp.com>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rewrite part of read_vmcore() that reads objects in vmcore_list in the
same way as part reading ELF headers, by which some duplicated and
redundant codes are removed.
Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp>
Cc: Lisa Mitchell <lisa.mitchell@hp.com>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
VM page reclaim uses dirty and writeback page states to determine if
flushers are cleaning pages too slowly and that page reclaim should
stall waiting on flushers to catch up. Page state in NFS is a bit more
complex and a clean page can be unreclaimable due to being unstable
which is effectively "dirty" from the perspective of the VM from reclaim
context. Similarly, if the inode is currently being committed then it's
similar to being under writeback.
This patch adds a is_dirty_writeback() handled for NFS that checks if a
pages backing inode is being committed and should be accounted as
writeback and if a page has private state indicating that it is
effectively dirty.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Cc: Zlatko Calusic <zcalusic@bitsync.net>
Cc: dormando <dormando@rydia.net>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Page reclaim keeps track of dirty and under writeback pages and uses it
to determine if wait_iff_congested() should stall or if kswapd should
begin writing back pages. This fails to account for buffer pages that
can be under writeback but not PageWriteback which is the case for
filesystems like ext3 ordered mode. Furthermore, PageDirty buffer pages
can have all the buffers clean and writepage does no IO so it should not
be accounted as congested.
This patch adds an address_space operation that filesystems may
optionally use to check if a page is really dirty or really under
writeback. An implementation is provided for for buffer_heads is added
and used for block operations and ext3 in ordered mode. By default the
page flags are obeyed.
Credit goes to Jan Kara for identifying that the page flags alone are
not sufficient for ext3 and sanity checking a number of ideas on how the
problem could be addressed.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Cc: Zlatko Calusic <zcalusic@bitsync.net>
Cc: dormando <dormando@rydia.net>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(*->vm_end - *->vm_start) >> PAGE_SHIFT operation is implemented
as a inline funcion vma_pages() in linux/mm.h, so using it.
Signed-off-by: Libin <huawei.libin@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In order to reuse bits from pagemap entries gracefully, we leave the
entries as is but on pagemap open emit a warning in dmesg, that bits
55-60 are about to change in a couple of releases. Next, if a user
issues soft-dirty clear command via the clear_refs file (it was disabled
before v3.9) we assume that he's aware of the new pagemap format, note
that fact and report the bits in pagemap in the new manner.
The "migration strategy" looks like this then:
1. existing users are not affected -- they don't touch soft-dirty feature, thus
see old bits in pagemap, but are warned and have time to fix themselves
2. those who use soft-dirty know about new pagemap format
3. some time soon we get rid of any signs of page-shift in pagemap as well as
this trick with clear-soft-dirty affecting pagemap format.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The soft-dirty is a bit on a PTE which helps to track which pages a task
writes to. In order to do this tracking one should
1. Clear soft-dirty bits from PTEs ("echo 4 > /proc/PID/clear_refs)
2. Wait some time.
3. Read soft-dirty bits (55'th in /proc/PID/pagemap2 entries)
To do this tracking, the writable bit is cleared from PTEs when the
soft-dirty bit is. Thus, after this, when the task tries to modify a
page at some virtual address the #PF occurs and the kernel sets the
soft-dirty bit on the respective PTE.
Note, that although all the task's address space is marked as r/o after
the soft-dirty bits clear, the #PF-s that occur after that are processed
fast. This is so, since the pages are still mapped to physical memory,
and thus all the kernel does is finds this fact out and puts back
writable, dirty and soft-dirty bits on the PTE.
Another thing to note, is that when mremap moves PTEs they are marked
with soft-dirty as well, since from the user perspective mremap modifies
the virtual memory at mremap's new address.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
These bits are always constant (== PAGE_SHIFT) and just occupy space in
the entry. Moreover, in next patch we will need to report one more bit
in the pagemap, but all bits are already busy on it.
That said, describe the pagemap entry that has 6 more free zero bits.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In the next patch the clear-refs-type will be required in
clear_refs_pte_range funciton, so prepare the walk->private to carry
this info.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the implementation of the soft-dirty bit concept that should
help keep track of changes in user memory, which in turn is very-very
required by the checkpoint-restore project (http://criu.org).
To create a dump of an application(s) we save all the information about
it to files, and the biggest part of such dump is the contents of tasks'
memory. However, there are usage scenarios where it's not required to
get _all_ the task memory while creating a dump. For example, when
doing periodical dumps, it's only required to take full memory dump only
at the first step and then take incremental changes of memory. Another
example is live migration. We copy all the memory to the destination
node without stopping all tasks, then stop them, check for what pages
has changed, dump it and the rest of the state, then copy it to the
destination node. This decreases freeze time significantly.
That said, some help from kernel to watch how processes modify the
contents of their memory is required.
The proposal is to track changes with the help of new soft-dirty bit
this way:
1. First do "echo 4 > /proc/$pid/clear_refs".
At that point kernel clears the soft dirty _and_ the writable bits from all
ptes of process $pid. From now on every write to any page will result in #pf
and the subsequent call to pte_mkdirty/pmd_mkdirty, which in turn will set
the soft dirty flag.
2. Then read the /proc/$pid/pagemap2 and check the soft-dirty bit reported there
(the 55'th one). If set, the respective pte was written to since last call
to clear refs.
The soft-dirty bit is the _PAGE_BIT_HIDDEN one. Although it's used by
kmemcheck, the latter one marks kernel pages with it, while the former
bit is put on user pages so they do not conflict to each other.
This patch:
A new clear-refs type will be added in the next patch, so prepare
code for that.
[akpm@linux-foundation.org: don't assume that sizeof(enum clear_refs_types) == sizeof(int)]
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There may exist NULL pointer dereference in config_item_name() when one
volume (say Volume A) unmounts while another (say Volume B) mounting.
Volume A Volume B
already Mounted.
Unmounting, call
o2hb_heartbeat_group_drop_item()
-> config_item_put(item)
set reg(A)->item.ci_name to NULL
in function config_item_cleanup().
begin mounting, call
o2hb_region_pin() and tranverse all
regions. When reading
reg(A)->item.ci_name, it causes
NULL pointer dereference.
call o2hb_region_release() and
del reg(A) from list.
So we should skip accessing regions that is going to release when
tranverse o2hb_all_regions.
Signed-off-by: Yiwen Jiang <jiangyiwen@huawei.com>
Signed-off-by: joyce <xuejiufei@huawei.com>
Acked-by: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Sunil Mushran <sunil.mushran@gmail.com>
Cc: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix a comment typo in o2quo_hb_still_up()
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Cc: Gurudas Pai <gurudas.pai@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Noboru Iwamatsu <n_iwamatsu@jp.fujitsu.com>
Cc: Srinivas Eeeda <srinivas.eeda@oracle.com>
Cc: Sunil Mushran <sunil.mushran@gmail.com>
Cc: Tao Ma <tm@tao.ma>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
s/o2hb_global_hearbeat_mode_set/o2hb_global_heartbeat_mode_set/ to make
the signature of those routines in a consistent manner with others for
heartbeating.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Acked-by: Sunil Mushran <sunil.mushran@gmail.com>
Cc: Gurudas Pai <gurudas.pai@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Noboru Iwamatsu <n_iwamatsu@jp.fujitsu.com>
Cc: Srinivas Eeeda <srinivas.eeda@oracle.com>
Cc: Tao Ma <tm@tao.ma>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Under heavy I/O load, writing the disk heartbeat can be forced to wait for
minutes, and this causes the node to be fenced.
This patch tries to use WRITE_SYNC in submitting the heartbeat bio, so
that writing the heartbeat will have a priority over other requests.
Signed-off-by: Noboru Iwamatsu <n_iwamatsu@jp.fujitsu.com>
Acked-by: Tao Ma <tm@tao.ma>
Acked-by: Sunil Mushran <sunil.mushran@gmail.com>
Cc: Srinivas Eeeda <srinivas.eeda@oracle.com>
Reviewed-by: Jie Liu <jeff.liu@oracle.com>
Tested-by: Gurudas Pai <gurudas.pai@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Inlined xattr shared free space of inode block with inlined data or data
extent record, so the size of the later two should be adjusted when
inlined xattr is enabled. See ocfs2_xattr_ibody_init(). But this isn't
done well when reflink. For inode with inlined data, its max inlined
data size is adjusted in ocfs2_duplicate_inline_data(), no problem. But
for inode with data extent record, its record count isn't adjusted. Fix
it, or data extent record and inlined xattr may overwrite each other,
then cause data corruption or xattr failure.
One panic caused by this bug in our test environment is the following:
kernel BUG at fs/ocfs2/xattr.c:1435!
invalid opcode: 0000 [#1] SMP
Pid: 10871, comm: multi_reflink_t Not tainted 2.6.39-300.17.1.el5uek #1
RIP: ocfs2_xa_offset_pointer+0x17/0x20 [ocfs2]
RSP: e02b:ffff88007a587948 EFLAGS: 00010283
RAX: 0000000000000000 RBX: 0000000000000010 RCX: 00000000000051e4
RDX: ffff880057092060 RSI: 0000000000000f80 RDI: ffff88007a587a68
RBP: ffff88007a587948 R08: 00000000000062f4 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000010
R13: ffff88007a587a68 R14: 0000000000000001 R15: ffff88007a587c68
FS: 00007fccff7f06e0(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000
CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00000000015cf000 CR3: 000000007aa76000 CR4: 0000000000000660
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process multi_reflink_t
Call Trace:
ocfs2_xa_reuse_entry+0x60/0x280 [ocfs2]
ocfs2_xa_prepare_entry+0x17e/0x2a0 [ocfs2]
ocfs2_xa_set+0xcc/0x250 [ocfs2]
ocfs2_xattr_ibody_set+0x98/0x230 [ocfs2]
__ocfs2_xattr_set_handle+0x4f/0x700 [ocfs2]
ocfs2_xattr_set+0x6c6/0x890 [ocfs2]
ocfs2_xattr_user_set+0x46/0x50 [ocfs2]
generic_setxattr+0x70/0x90
__vfs_setxattr_noperm+0x80/0x1a0
vfs_setxattr+0xa9/0xb0
setxattr+0xc3/0x120
sys_fsetxattr+0xa8/0xd0
system_call_fastpath+0x16/0x1b
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Jie Liu <jeff.liu@oracle.com>
Acked-by: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Sunil Mushran <sunil.mushran@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
While deleting a file with ocfs2_unlink(), there is a bug in this
function. This bug will result in filesystem read-only.
After calling ocfs2_orphan_add(), the file which will be deleted is
added into orphan dir. If ocfs2_delete_entry() fails, the file still
exists in the parent dir. And this scenario introduces a conflict of
metadata.
If a file is added into orphan dir, when we put inode of the file with
iput(), the inode i_flags is setted (~OCFS2_VALID_FL) in
ocfs2_remove_inode(), and then write back to disk.
But as previously mentioned, the file still exists in the parent dir.
On other nodes, the file can be still accessed. When first read the
file with ocfs2_read_blocks() from disk, It will check and avalidate
inode using ocfs2_validate_inode_block(). So File system will be
readonly because the inode is invalid. In other words, the inode
i_flags has been set (~OCFS2_VALID_FL).
[akpm@linux-foundation.org: cleanups]
[jeff.liu@oracle.com: s/inode_is_unlinkable/ocfs2_inode_is_unlinkable/]
Signed-off-by: Younger Liu <younger.liu@huawei.com>
Signed-off-by: Jensen <shencanquan@huawei.com>
Cc: Jie Liu <jeff.liu@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Sunil Mushran <sunil.mushran@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jie Liu <jeff.liu@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Sunil Mushran <sunil.mushran@gmail.com>
Cc: Younger Liu <younger.liu@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In ocfs2_relink_block_group(), we roll back all those changes if notify
intent to modify buffers for metadata update failed even if the relevant
buffer has not yet been modified/got dirty at that point, that are not
quite right because of:
- None buffer has been modified/dirty if failed to call
ocfs2_journal_access_gd() against the previous block group buffer
- Only the previous block group buffer has got dirty if failed to call
ocfs2_journal_access_gd() against the block group buffer
- There is no need to roll back the change for file entry buffer at all
Those problems will not cause anything wrong but unnecessary. This
patch fix them and kill the useless bg_ptr variable as well.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Cc: Younger Liu <younger.liu@huawei.com>
Cc: Sunil Mushran <sunil.mushran@gmail.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
While adding a file into orphan dir in ocfs2_orphan_add(), it calls
__ocfs2_add_entry() before ocfs2_journal_access_di(). If
ocfs2_journal_access_di() failed, the file is added into orphan dir, and
orphan dir dinode updated, but file dinode has not been updated.
Accordingly, the data is not consistent between file dinode and orphan
dir.
So, need to call ocfs2_journal_access_di() before __ocfs2_add_entry(),
and if ocfs2_journal_access_di() failed, orphan_fe and
orphan_dir_inode->i_nlink need rollback.
This bug was added by 3939fda4 ("Ocfs2: Journaling i_flags and
i_orphaned_slot when adding inode to orphan dir.").
Signed-off-by: Younger Liu <younger.liu@huawei.com>
Acked-by: Jeff Liu <jeff.liu@oracle.com>
Cc: Sunil Mushran <sunil.mushran@gmail.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
dlmlock_master() returns DLM_RECOVERING/DLM_MIGRATING/ DLM_FORWAR after
adding lock to blocked list if lockres has the state
DLM_LOCK_RES_RECOVERING/DLM_LOCK_RES_MIGRATING/ DLM_LOCK_RES_IN_PROGRESS.
so it will retry in dlmlock(). And this may cause dlm_thread fall into an
infinite loop
Thread1 dlm_thread
calls dlm_lock->dlmlock_master,
if lockresA is in state
DLM_LOCK_RES_RECOVERING, calls
__dlm_wait_on_lockres() and waits
until others threads clear this
state;
If cannot grant this lock,
adding lock to blocked list,
and return DLM_RECOVERING;
Grant this lock and move it to
grant list;
After a while, retry and
calls list_add_tail(), adding lock
to blocked list again.
Granted and blocked list of this lockres will become the following
conditions:
lock_res->granted.next = dlm_lock->list_head;
lock_res->blocked.next = dlm_lock->list_head;
dlm_lock->list_head.next = dlm_lock_resource->blocked;
When dlm_thread traverses the granted list, it will fall into an endless
loop, checking dlm_lock.list_head, dlm_lock->list_head.next
(i.e.lock_res->blocked), lock_res->blocked.next(i.e.dlm_lock.list_head
again) .....
Signed-off-by: joyce <xuejiufei@huawei.com>
Reviewed-by: jensen <shencanquan@huawei.com>
Cc: Jeff Liu <jeff.liu@oracle.com>
Acked-by: Sunil Mushran <sunil.mushran@gmail.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Free space checking will be done in ocfs2_xattr_ibody_init(). So remove
here.
[akpm@linux-foundation.org: remove unused local]
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Jie Liu <jeff.liu@oracle.com>
Acked-by: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is a memory leak in sc_kref_release(). When free struct
o2net_sock_container (sc), we should release sc->sc_page.
Signed-off-by: Younger Liu <younger.liu@huawei.com>
Reviewed-by: Jie Liu <jeff.liu@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
While adding extends to a file, the credits are calculated incorrectly
and if the requested clusters is more than one (or more because we used
a conservative limit) then we run out of journal credits and we hit an
assert in journalling code.
The function parameter bits_wanted variable was not used at all.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: Jie Liu <jeff.liu@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In ocfs2_remove_btree_range, when calling ocfs2_lock_refcount_tree and
ocfs2_prepare_refcount_change_for_del failed, it goes to out and then
tries to call mutex_unlock without mutex_lock before. And when calling
ocfs2_reserve_blocks_for_rec_trunc failed, it should free ref_tree
before return.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Reviewed-by: Jie Liu <jeff.liu@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Code cleanup: needs_checkpoint is assigned to but never used. Delete
the variable.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Cc: Jeff Liu <jeff.liu@oracle.com>
Acked-by: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
dlm_begin_reco_handler() returns without putting dlm when dlm recovery
state is DLM_RECO_STATE_FINALIZE.
Signed-off-by: joyce <xuejiufei@huawei.com>
Reviewed-by: Jie Liu <jeff.liu@oracle.com>
Acked-by: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If we use le32_add_cpu to set ocfs2_dinode i_flags, it may lead to the
corresponding flag corrupted. So we should change it to bitwise and/or
operation.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: shencanquan <shencanquan@huawei.com>
Reviewed-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In dlm_request_all_locks, ret is type enum. But o2net_send_message
returns a type int value. Then it will never run into the following
error branch. So we should change the ret type from enum to int.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Acked-by: Sunil Mushran <sunil.mushran@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Below 3 functions have already been declared in dlmcommon.h, so we have
no need to declare them again in dlmrecovery.c:
dlm_complete_recovery_thread
dlm_launch_recovery_thread
dlm_kick_recovery_thread
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Acked-by: Sunil Mushran <sunil.mushran@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The difference between "count" and "len" is that "len" is capped at
4095. Changing it like this makes it match how sysfs_write_file() is
implemented.
This is a static analysis patch. I haven't found any store_attribute()
functions where this change makes a difference.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If we receive new caps from the auth MDS and the non-auth MDS is
revoking the newly issued caps, we should release the caps from
the non-auth MDS. The scenario is filelock's state changes from
SYNC to LOCK. Non-auth MDS revokes Fc cap, the client gets Fc cap
from the auth MDS at the same time.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
If caps are been revoking by the auth MDS, don't consider them as
issued even they are still issued by non-auth MDS. The non-auth
MDS should also be revoking/exporting these caps, the client just
hasn't received the cap revoke/export message.
The race I encountered is: When caps are exporting to new MDS, the
client receives cap import message and cap revoke message from the
new MDS, then receives cap export message from the old MDS. When
the client receives cap revoke message from the new MDS, the revoking
caps are still issued by the old MDS, so the client does nothing.
Later when the cap export message is received, the client removes
the caps issued by the old MDS. (Another way to fix the race is
calling ceph_check_caps() in handle_cap_export())
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
The locking order for pending vmtruncate is wrong, it can lead to
following race:
write wmtruncate work
------------------------ ----------------------
lock i_mutex
check i_truncate_pending check i_truncate_pending
truncate_inode_pages() lock i_mutex (blocked)
copy data to page cache
unlock i_mutex
truncate_inode_pages()
The fix is take i_mutex before calling __ceph_do_pending_vmtruncate()
Fixes: http://tracker.ceph.com/issues/5453
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Drop ignored return value. Fix allocation failure case to not leak.
Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Either in vfs_write or io_submit,it call file_start/end_write.
The different between file_start/end_write and sb_start/end_write is
file_ only handle regular file.But i think in ceph_aio_write,it only
for regular file.
Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Acked-by: Yan, Zheng <zheng.z.yan@intel.com>
We may receive old request reply from the exporter MDS after receiving
the importer MDS' cap import message.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
The client can receive truncate request from MDS at any time.
So the page writeback code need to get i_size, truncate_seq and
truncate_size atomically
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
ceph_encode_inode_release() can race with ceph_open() and release
caps wanted by open files. So it should call __ceph_caps_wanted()
to get the wanted caps.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Conflicts:
drivers/net/ethernet/freescale/fec_main.c
drivers/net/ethernet/renesas/sh_eth.c
net/ipv4/gre.c
The GRE conflict is between a bug fix (kfree_skb --> kfree_skb_list)
and the splitting of the gre.c code into seperate files.
The FEC conflict was two sets of changes adding ethtool support code
in an "!CONFIG_M5272" CPP protected block.
Finally the sh_eth.c conflict was between one commit add bits set
in the .eesr_err_check mask whilst another commit removed the
.tx_error_check member and assignments.
Signed-off-by: David S. Miller <davem@davemloft.net>
- Hotplug changes allowing device hot-removal operations to fail
gracefully (instead of crashing the kernel) if they cannot be
carried out completely. From Rafael J Wysocki and Toshi Kani.
- Freezer update from Colin Cross and Mandeep Singh Baines targeted
at making the freezing of tasks a bit less heavy weight operation.
- cpufreq resume fix from Srivatsa S Bhat for a regression introduced
during the 3.10 cycle causing some cpufreq sysfs attributes to
return wrong values to user space after resume.
- New freqdomain_cpus sysfs attribute for the acpi-cpufreq driver to
provide information previously available via related_cpus from
Lan Tianyu.
- cpufreq fixes and cleanups from Viresh Kumar, Jacob Shin,
Heiko Stübner, Xiaoguang Chen, Ezequiel Garcia, Arnd Bergmann, and
Tang Yuantian.
- Fix for an ACPICA regression causing suspend/resume issues to
appear on some systems introduced during the 3.4 development cycle
from Lv Zheng.
- ACPICA fixes and cleanups from Bob Moore, Tomasz Nowicki, Lv Zheng,
Chao Guan, and Zhang Rui.
- New cupidle driver for Xilinx Zynq processors from Michal Simek.
- cpuidle fixes and cleanups from Daniel Lezcano.
- Changes to make suspend/resume work correctly in Xen guests from
Konrad Rzeszutek Wilk.
- ACPI device power management fixes and cleanups from Fengguang Wu
and Rafael J Wysocki.
- ACPI documentation updates from Lv Zheng, Aaron Lu and Hanjun Guo.
- Fix for the IA-64 issue that was the reason for reverting commit
9f29ab1 and updates of the ACPI scan code from Rafael J Wysocki.
- Mechanism for adding CMOS RTC address space handlers from Lan Tianyu
(to allow some EC-related breakage to be fixed on some systems).
- Spec-compliant implementation of acpi_os_get_timer() from
Mika Westerberg.
- Modification of do_acpi_find_child() to execute _STA in order to
to avoid situations in which a pointer to a disabled device object
is returned instead of an enabled one with the same _ADR value.
From Jeff Wu.
- Intel BayTrail PCH (Platform Controller Hub) support for the ACPI
Intel Low-Power Subsystems (LPSS) driver and modificaions of that
driver to work around a couple of known BIOS issues from
Mika Westerberg and Heikki Krogerus.
- EC driver fix from Vasiliy Kulikov to make it use get_user() and
put_user() instead of dereferencing user space pointers blindly.
- Assorted ACPI code cleanups from Bjorn Helgaas, Nicholas Mazzuca and
Toshi Kani.
- Modification of the "runtime idle" helper routine to take the return
values of the callbacks executed by it into account and to call
rpm_suspend() if they return 0, which allows some code bloat
reduction to be done, from Rafael J Wysocki and Alan Stern.
- New trace points for PM QoS from Sahara <keun-o.park@windriver.com>.
- PM QoS documentation update from Lan Tianyu.
- Assorted core PM code cleanups and changes from Bernie Thompson,
Bjorn Helgaas, Julius Werner, and Shuah Khan.
- New devfreq driver for the Exynos5-bus device from Abhilash Kesavan.
- Minor devfreq cleanups, fixes and MAINTAINERS update from
MyungJoo Ham, Abhilash Kesavan, Paul Bolle, Rajagopal Venkat, and
Wei Yongjun.
- OMAP Adaptive Voltage Scaling (AVS) SmartReflex voltage control
driver updates from Andrii Tseglytskyi and Nishanth Menon.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=VBBq
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI updates from Rafael Wysocki:
"This time the total number of ACPI commits is slightly greater than
the number of cpufreq commits, but Viresh Kumar (who works on cpufreq)
remains the most active patch submitter.
To me, the most significant change is the addition of offline/online
device operations to the driver core (with the Greg's blessing) and
the related modifications of the ACPI core hotplug code. Next are the
freezer updates from Colin Cross that should make the freezing of
tasks a bit less heavy weight.
We also have a couple of regression fixes, a number of fixes for
issues that have not been identified as regressions, two new drivers
and a bunch of cleanups all over.
Highlights:
- Hotplug changes to support graceful hot-removal failures.
It sometimes is necessary to fail device hot-removal operations
gracefully if they cannot be carried out completely. For example,
if memory from a memory module being hot-removed has been allocated
for the kernel's own use and cannot be moved elsewhere, it's
desirable to fail the hot-removal operation in a graceful way
rather than to crash the kernel, but currenty a success or a kernel
crash are the only possible outcomes of an attempted memory
hot-removal. Needless to say, that is not a very attractive
alternative and it had to be addressed.
However, in order to make it work for memory, I first had to make
it work for CPUs and for this purpose I needed to modify the ACPI
processor driver. It's been split into two parts, a resident one
handling the low-level initialization/cleanup and a modular one
playing the actual driver's role (but it binds to the CPU system
device objects rather than to the ACPI device objects representing
processors). That's been sort of like a live brain surgery on a
patient who's riding a bike.
So this is a little scary, but since we found and fixed a couple of
regressions it caused to happen during the early linux-next testing
(a month ago), nobody has complained.
As a bonus we remove some duplicated ACPI hotplug code, because the
ACPI-based CPU hotplug is now going to use the common ACPI hotplug
code.
- Lighter weight freezing of tasks.
These changes from Colin Cross and Mandeep Singh Baines are
targeted at making the freezing of tasks a bit less heavy weight
operation. They reduce the number of tasks woken up every time
during the freezing, by using the observation that the freezer
simply doesn't need to wake up some of them and wait for them all
to call refrigerator(). The time needed for the freezer to decide
to report a failure is reduced too.
Also reintroduced is the check causing a lockdep warining to
trigger when try_to_freeze() is called with locks held (which is
generally unsafe and shouldn't happen).
- cpufreq updates
First off, a commit from Srivatsa S Bhat fixes a resume regression
introduced during the 3.10 cycle causing some cpufreq sysfs
attributes to return wrong values to user space after resume. The
fix is kind of fresh, but also it's pretty obvious once Srivatsa
has identified the root cause.
Second, we have a new freqdomain_cpus sysfs attribute for the
acpi-cpufreq driver to provide information previously available via
related_cpus. From Lan Tianyu.
Finally, we fix a number of issues, mostly related to the
CPUFREQ_POSTCHANGE notifier and cpufreq Kconfig options and clean
up some code. The majority of changes from Viresh Kumar with bits
from Jacob Shin, Heiko Stübner, Xiaoguang Chen, Ezequiel Garcia,
Arnd Bergmann, and Tang Yuantian.
- ACPICA update
A usual bunch of updates from the ACPICA upstream.
During the 3.4 cycle we introduced support for ACPI 5 extended
sleep registers, but they are only supposed to be used if the
HW-reduced mode bit is set in the FADT flags and the code attempted
to use them without checking that bit. That caused suspend/resume
regressions to happen on some systems. Fix from Lv Zheng causes
those registers to be used only if the HW-reduced mode bit is set.
Apart from this some other ACPICA bugs are fixed and code cleanups
are made by Bob Moore, Tomasz Nowicki, Lv Zheng, Chao Guan, and
Zhang Rui.
- cpuidle updates
New driver for Xilinx Zynq processors is added by Michal Simek.
Multidriver support simplification, addition of some missing
kerneldoc comments and Kconfig-related fixes come from Daniel
Lezcano.
- ACPI power management updates
Changes to make suspend/resume work correctly in Xen guests from
Konrad Rzeszutek Wilk, sparse warning fix from Fengguang Wu and
cleanups and fixes of the ACPI device power state selection
routine.
- ACPI documentation updates
Some previously missing pieces of ACPI documentation are added by
Lv Zheng and Aaron Lu (hopefully, that will help people to
uderstand how the ACPI subsystem works) and one outdated doc is
updated by Hanjun Guo.
- Assorted ACPI updates
We finally nailed down the IA-64 issue that was the reason for
reverting commit 9f29ab11dd ("ACPI / scan: do not match drivers
against objects having scan handlers"), so we can fix it and move
the ACPI scan handler check added to the ACPI video driver back to
the core.
A mechanism for adding CMOS RTC address space handlers is
introduced by Lan Tianyu to allow some EC-related breakage to be
fixed on some systems.
A spec-compliant implementation of acpi_os_get_timer() is added by
Mika Westerberg.
The evaluation of _STA is added to do_acpi_find_child() to avoid
situations in which a pointer to a disabled device object is
returned instead of an enabled one with the same _ADR value. From
Jeff Wu.
Intel BayTrail PCH (Platform Controller Hub) support is added to
the ACPI driver for Intel Low-Power Subsystems (LPSS) and that
driver is modified to work around a couple of known BIOS issues.
Changes from Mika Westerberg and Heikki Krogerus.
The EC driver is fixed by Vasiliy Kulikov to use get_user() and
put_user() instead of dereferencing user space pointers blindly.
Code cleanups are made by Bjorn Helgaas, Nicholas Mazzuca and Toshi
Kani.
- Assorted power management updates
The "runtime idle" helper routine is changed to take the return
values of the callbacks executed by it into account and to call
rpm_suspend() if they return 0, which allows us to reduce the
overall code bloat a bit (by dropping some code that's not
necessary any more after that modification).
The runtime PM documentation is updated by Alan Stern (to reflect
the "runtime idle" behavior change).
New trace points for PM QoS are added by Sahara
(<keun-o.park@windriver.com>).
PM QoS documentation is updated by Lan Tianyu.
Code cleanups are made and minor issues are addressed by Bernie
Thompson, Bjorn Helgaas, Julius Werner, and Shuah Khan.
- devfreq updates
New driver for the Exynos5-bus device from Abhilash Kesavan.
Minor cleanups, fixes and MAINTAINERS update from MyungJoo Ham,
Abhilash Kesavan, Paul Bolle, Rajagopal Venkat, and Wei Yongjun.
- OMAP power management updates
Adaptive Voltage Scaling (AVS) SmartReflex voltage control driver
updates from Andrii Tseglytskyi and Nishanth Menon."
* tag 'pm+acpi-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (162 commits)
cpufreq: Fix cpufreq regression after suspend/resume
ACPI / PM: Fix possible NULL pointer deref in acpi_pm_device_sleep_state()
PM / Sleep: Warn about system time after resume with pm_trace
cpufreq: don't leave stale policy pointer in cdbs->cur_policy
acpi-cpufreq: Add new sysfs attribute freqdomain_cpus
cpufreq: make sure frequency transitions are serialized
ACPI: implement acpi_os_get_timer() according the spec
ACPI / EC: Add HP Folio 13 to ec_dmi_table in order to skip DSDT scan
ACPI: Add CMOS RTC Operation Region handler support
ACPI / processor: Drop unused variable from processor_perflib.c
cpufreq: tegra: call CPUFREQ_POSTCHANGE notfier in error cases
cpufreq: s3c64xx: call CPUFREQ_POSTCHANGE notfier in error cases
cpufreq: omap: call CPUFREQ_POSTCHANGE notfier in error cases
cpufreq: imx6q: call CPUFREQ_POSTCHANGE notfier in error cases
cpufreq: exynos: call CPUFREQ_POSTCHANGE notfier in error cases
cpufreq: dbx500: call CPUFREQ_POSTCHANGE notfier in error cases
cpufreq: davinci: call CPUFREQ_POSTCHANGE notfier in error cases
cpufreq: arm-big-little: call CPUFREQ_POSTCHANGE notfier in error cases
cpufreq: powernow-k8: call CPUFREQ_POSTCHANGE notfier in error cases
cpufreq: pcc: call CPUFREQ_POSTCHANGE notfier in error cases
...
Pull cifs updates from Steve French:
"Various CIFS/SMB2/SMB3 updates for 3.11. Includes bug fixes - SMB3
support should be much more stable with key DFS fix and also signing
possible now (although is more work to do to get SMB3 signing working
well with multiuser).
Mounts using the new SMB 3.02 dialect can now be done (specify
"vers=3.02" on mount) against the most current Microsoft systems.
Also includes a big cleanup of the cifs/smb2/smb3 authentication code
from Jeff which fixes some long standing problems with the way allowed
authentication flavors and signing are configured.
Some followon patches later in the cycle will clean up allocation of
structures for the various security mechanisms depending on what
dialect is chosen (reduces memory usage a little) and to add support
for the secure negotiate fsctl (for smb3) which prevents downgrade
attacks."
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6: (39 commits)
cifs: fill TRANS2_QUERY_FILE_INFO ByteCount fields
cifs: fix SMB2 signing enablement in cifs_enable_signing
[CIFS] Fix build warning
[CIFS] SMB3 Signing enablement
[CIFS] Do not set DFS flag on SMB2 open
[CIFS] fix static checker warning
cifs: try to handle the MUST SecurityFlags sanely
When server doesn't provide SecurityBuffer on SMB2Negotiate pick default
Handle big endianness in NTLM (ntlmv2) authentication
revalidate directories instiantiated via FIND_* in order to handle DFS referrals
SMB2 FSCTL and IOCTL worker function
Charge at least one credit, if server says that it supports multicredit
Remove typo
Some missing share flags
cifs: using strlcpy instead of strncpy
Update headers to update various SMB3 ioctl definitions
Update cifs version number
Add ability to dipslay SMB3 share flags and capabilities for debugging
Add some missing SMB3 and SMB3.02 flags
Add SMB3.02 dialect support
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQIcBAABAgAGBQJRzg7SAAoJEKurIx+X31iBYsEP/A06TUjFMx8ZmPBdya1u0thq
4fMD8hUFv/vG90Opk1PBBCLWwAJJ6wwrQ8EQd5ieBInYSYW4bDlDFqCk7X0cZ7LE
tlRNsUVDS7LpscWEXoYshRzquj7xyCg0nJMBlMSca3vPYQ82iUD0v9vp5/TKwOgu
ti0mpj7kRj18FPkhokl+ja6fuUgUICPiRBvNR8DPskrnJ0lXv2Zyo0CKER47Wfa4
+fVqXZL0Ih1tivqH/3abA1MYXjxh9k9Db+USupYpQnPwZwDTWap0z/OYU9Swni6I
/XW5c5vrAX9LyMPxMenD0RUWMZXmRDc9ddseRBwVSzQtowQxFGChgwz1+41nFers
KTSLlrU1kij7+axBsjgPMli0SUoPlspv7Lt3JzEoJb0rtkOZmCDXu254qbDy7zxH
Q06Zmb86XtJRGQH43lxEUDZ4QSg+OHA4Uskp6s12Ly1KNvLpk5KOkbuM1DT2jPJb
6KbfOJNcATeCAoax/qJky++qh4E42okG5gOeqC1zquWcfRoVuS+nWBbu4kubKlNs
Qe3IjmybR2S6c1pidDViTnnR/FiununknZaBPavqvuqaf5wBaBwDKiBi973TYFyu
D4g+KyaMwvicGp59Z+u9QLGTaeVxHlVv1l3oSd3x7SVhJBwVLihgz7tULS4+X+YX
csTLhy2n8wE0aOHWH5su
=Xcer
-----END PGP SIGNATURE-----
Merge tag 'please-pull-pstore' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux
Pull pstore update from Tony Luck:
"Fixes for pstore for 3.11 merge window"
* tag 'please-pull-pstore' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
efivars: If pstore_register fails, free unneeded pstore buffer
acpi: Eliminate console msg if pstore.backend excludes ERST
pstore: Return unique error if backend registration excluded by kernel param
pstore: Fail to unlink if a driver has not defined pstore_erase
pstore/ram: remove the power of buffer size limitation
pstore/ram: avoid atomic accesses for ioremapped regions
efi, pstore: Cocci spatch "memdup.spatch"
Pull second set of VFS changes from Al Viro:
"Assorted f_pos race fixes, making do_splice_direct() safe to call with
i_mutex on parent, O_TMPFILE support, Jeff's locks.c series,
->d_hash/->d_compare calling conventions changes from Linus, misc
stuff all over the place."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
Document ->tmpfile()
ext4: ->tmpfile() support
vfs: export lseek_execute() to modules
lseek_execute() doesn't need an inode passed to it
block_dev: switch to fixed_size_llseek()
cpqphp_sysfs: switch to fixed_size_llseek()
tile-srom: switch to fixed_size_llseek()
proc_powerpc: switch to fixed_size_llseek()
ubi/cdev: switch to fixed_size_llseek()
pci/proc: switch to fixed_size_llseek()
isapnp: switch to fixed_size_llseek()
lpfc: switch to fixed_size_llseek()
locks: give the blocked_hash its own spinlock
locks: add a new "lm_owner_key" lock operation
locks: turn the blocked_list into a hashtable
locks: convert fl_link to a hlist_node
locks: avoid taking global lock if possible when waking up blocked waiters
locks: protect most of the file_lock handling with i_lock
locks: encapsulate the fl_link list handling
locks: make "added" in __posix_lock_file a bool
...
For those file systems(btrfs/ext4/ocfs2/tmpfs) that support
SEEK_DATA/SEEK_HOLE functions, we end up handling the similar
matter in lseek_execute() to update the current file offset
to the desired offset if it is valid, ceph also does the
simliar things at ceph_llseek().
To reduce the duplications, this patch make lseek_execute()
public accessible so that we can call it directly from the
underlying file systems.
Thanks Dave Chinner for this suggestion.
[AV: call it vfs_setpos(), don't bring the removed 'inode' argument back]
v2->v1:
- Add kernel-doc comments for lseek_execute()
- Call lseek_execute() in ceph->llseek()
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chris Mason <chris.mason@fusionio.com>
Cc: Josef Bacik <jbacik@fusionio.com>
Cc: Ben Myers <bpm@sgi.com>
Cc: Ted Tso <tytso@mit.edu>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Sage Weil <sage@inktank.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Time in range will fail safely if we move to a different cpu with an
extremely large clock skew.
Add time_in_range64() and convert lls to use it.
changelog:
v2
- fixed double call to sched_clock in can_poll_ll
- fixed checkpatchisms
Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Here's the big driver core merge for 3.11-rc1
Lots of little things, and larger firmware subsystem updates, all
described in the shortlog. Nice thing here is that we finally get rid
of CONFIG_HOTPLUG, after 10+ years, thanks to Stephen Rohtwell (it had
been always on for a number of kernel releases, now it's just removed.)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEYEABECAAYFAlHRsGMACgkQMUfUDdst+ylIIACfW8lLxOPVK+iYG699TWEBAkp0
LFEAnjlpAMJ1JnoZCuWDZObNCev93zGB
=020+
-----END PGP SIGNATURE-----
Merge tag 'driver-core-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here's the big driver core merge for 3.11-rc1
Lots of little things, and larger firmware subsystem updates, all
described in the shortlog. Nice thing here is that we finally get rid
of CONFIG_HOTPLUG, after 10+ years, thanks to Stephen Rohtwell (it had
been always on for a number of kernel releases, now it's just
removed)"
* tag 'driver-core-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (27 commits)
driver core: device.h: fix doc compilation warnings
firmware loader: fix another compile warning with PM_SLEEP unset
build some drivers only when compile-testing
firmware loader: fix compile warning with PM_SLEEP set
kobject: sanitize argument for format string
sysfs_notify is only possible on file attributes
firmware loader: simplify holding module for request_firmware
firmware loader: don't export cache_firmware and uncache_firmware
drivers/base: Use attribute groups to create sysfs memory files
firmware loader: fix compile warning
firmware loader: fix build failure with !CONFIG_FW_LOADER_USER_HELPER
Documentation: Updated broken link in HOWTO
Finally eradicate CONFIG_HOTPLUG
driver core: firmware loader: kill FW_ACTION_NOHOTPLUG requests before suspend
driver core: firmware loader: don't cache FW_ACTION_NOHOTPLUG firmware
Documentation: Tidy up some drivers/base/core.c kerneldoc content.
platform_device: use a macro instead of platform_driver_register
firmware: move EXPORT_SYMBOL annotations
firmware: Avoid deadlock of usermodehelper lock at shutdown
dell_rbu: Select CONFIG_FW_LOADER_USER_HELPER explicitly
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)
iQIVAwUAUdLdUxOxKuMESys7AQK1kQ//W7fgFXCG+5XVk4ECHGN5tqRn4tU69DY0
9nYU2/y1wbqV5cTO36XTcFPQK1qbW2ZdyvEZ2CF8OfwtQpLmcALGtpBIgJwYs+4H
DMkgO06zdk4caxc0C4JBIGs+MDeLNk2SQObqblGl1BAQKQ5cqsCLsIZ/rxln999m
ufuobfns1YvuHkzMtswUDmm3zWMpwqqPAbbl+fTwPU683a/AleckG2ACyFvKZAxA
OyI8kJR4e33a3/BGo/5OFb3qI1+Z25EOWdvdnM+r4hdKJZF9ZySlyc640GZHAO2J
wKj5lYp1nBpyNPvYvly174s2MxPju1CRHb7gxcV4LX3vtEY4/MCg7m6P46EUfC6R
C3V7PMMCjZXEQ01MKEmGig47EJKIiecCQUZupJnP7HFKPzeJR9mQZFd68WqzswAM
w9hcCw9hQ9y/kTDVrTVCHs0Q9iTxShfrJyfRJnQ1VcoT+1dieruTa9am9OBKiEw6
CQrPjq9RZZfsZHYr6RlGZHGJyzjrTzrf6EhxwmgaCxWycpvCuV7z76YgAVZI7V4r
qnJmH8dXWdoSA7nZ6sgsb5TRCLT9wu1nNId0DMpAGB1cDGga/55AZtqxdoJLnlkj
y/4wQavIrkfHHuS8c3gzVXPtYmM19CHgcKRFydXD0uGobzfxwYKTKMH+Gviu1NnH
/pGNNY2vVGI=
=Wjhu
-----END PGP SIGNATURE-----
Merge tag 'fscache-20130702' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull FS-Cache updates from David Howells:
"This contains a number of fixes for various FS-Cache issues plus some
cleanups. The commits are, in order:
1) Provide a system wait_on_atomic_t() and wake_up_atomic_t() sharing
the bit-wait table (enhancement for #8).
2) Don't put spin_lock() in a while-condition as spin_lock() may have
a do {} while(0) wrapper (cleanup).
3) Symbolically name i_mutex lock classes rather than using numbers
in CacheFiles (cleanup).
4) Don't sleep in page release if __GFP_FS is not set (deadlock vs
ext4).
5) Uninline fscache_object_init() (cleanup for #7).
6) Wrap checks on object state (cleanup for #7).
7) Simplify the object state machine by separating work states from
wait states.
8) Simplify cookie retention by objects (NULL pointer deref fix).
9) Remove unused list_to_page() macro (cleanup).
10) Make the remaining-pages counter in the retrieval op atomic
(assertion failure fix).
11) Don't use spin_is_locked() in assertions (assertion failure fix)"
* tag 'fscache-20130702' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
FS-Cache: Don't use spin_is_locked() in assertions
FS-Cache: The retrieval remaining-pages counter needs to be atomic_t
cachefiles: remove unused macro list_to_page()
FS-Cache: Simplify cookie retention for fscache_objects, fixing oops
FS-Cache: Fix object state machine to have separate work and wait states
FS-Cache: Wrap checks on object state
FS-Cache: Uninline fscache_object_init()
FS-Cache: Don't sleep in page release if __GFP_FS is not set
CacheFiles: name i_mutex lock class explicitly
fs/fscache: remove spin_lock() from the condition in while()
Add wait_on_atomic_t() and wake_up_atomic_t()
This set includes a number of SCTP related fixes in the dlm,
and a few other minor fixes and changes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=/kqw
-----END PGP SIGNATURE-----
Merge tag 'dlm-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm updates from David Teigland:
"This set includes a number of SCTP related fixes in the dlm, and a few
other minor fixes and changes."
* tag 'dlm-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
dlm: Avoid LVB truncation
dlm: log an error for unmanaged lockspaces
dlm: config: using strlcpy instead of strncpy
dlm: remove duplicated include from lowcomms.c
dlm: disable nagle for SCTP
dlm: retry failed SCTP sends
dlm: try other IPs when sctp init assoc fails
dlm: clear correct bit during sctp init failure handling
dlm: set sctp assoc id during setup
dlm: clear correct init bit during sctp setup
o remount_fs callback function
o restore parent inode number to enhance the fsync performance
o xattr security labels
o reduce the number of redundant lock/unlock data pages
o avoid frequent write_inode calls
The other minor bug fixes are as follows.
o endian conversion bugs
o various bugs in the roll-forward recovery routine
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQIcBAABAgAGBQJR0h8YAAoJEEAUqH6CSFDSJNMP/1V+e/PaLa8YsHuw5eWPT3Fe
RYFXJv7SXadHqgQInjwD7JOF8BC9DlUyknYUiXFUZgvKsgMHz+OTCNl+1hLTbUXt
e6Rhn7vU/fMu3TEtj+v6g8JbpXdXH8TSbtvh9LpoczRS98GYpZuckP0BtQsVkTL3
jIq6WD8JRkb2DvpDl7viTT0Eq0T61CSmtOwOIvfhhiVxggvDWcnR1mTM9Tymdi4J
NKtFkjCsKP0Z/7IZZUJAczGEHjsT+O6JDwp8+KVWuZT4BSuchoX4MYAY5wX527Ne
rZvkolbbfnAFCC3BtETr0DPOkpxnHmJ6dEveIxjZ9cux12CAFA/Ww1QAL4ygiDkd
Avn8BBEJnfnuzeOUkE0by+9hdF9LOU3CVSxiDhWJegYB16z+c9pSBD9xvlKhKk5B
QNsjptB6m0CftAq7vIDsryL60uJ2cSHFxPqfwAHEpNngiU/NohTFSZE0sUMbLUNh
FI6NrHoT7yld1HcB6cvL1lnUqIENFbNhDSSDcTdlN49IJJap4oqtgCnmMMIwbUCO
vR2/26k5W7NwG+K6XN2IX13AsayzQahxTv8in/+LV0bfjHo6/1VzzGcqAmXJbDQw
dLrNAeWaaIJi8J/zJiENMbFKXTj8Wax9jxKsW+4towQuyEt4ADvyt1c5gX3VR42T
x8+YEargsdBf6FAhtN+H
=qFcy
-----END PGP SIGNATURE-----
Merge tag 'for-f2fs-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"This patch-set includes the following major enhancement patches:
- remount_fs callback function
- restore parent inode number to enhance the fsync performance
- xattr security labels
- reduce the number of redundant lock/unlock data pages
- avoid frequent write_inode calls
The other minor bug fixes are as follows.
- endian conversion bugs
- various bugs in the roll-forward recovery routine"
* tag 'for-f2fs-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (56 commits)
f2fs: fix to recover i_size from roll-forward
f2fs: remove the unused argument "sbi" of func destroy_fsync_dnodes()
f2fs: remove reusing any prefree segments
f2fs: code cleanup and simplify in func {find/add}_gc_inode
f2fs: optimize the init_dirty_segmap function
f2fs: fix an endian conversion bug detected by sparse
f2fs: fix crc endian conversion
f2fs: add remount_fs callback support
f2fs: recover wrong pino after checkpoint during fsync
f2fs: optimize do_write_data_page()
f2fs: make locate_dirty_segment() as static
f2fs: remove unnecessary parameter "offset" from __add_sum_entry()
f2fs: avoid freqeunt write_inode calls
f2fs: optimise the truncate_data_blocks_range() range
f2fs: use the F2FS specific flags in f2fs_ioctl()
f2fs: sync dir->i_size with its block allocation
f2fs: fix i_blocks translation on various types of files
f2fs: set sb->s_fs_info before calling parse_options()
f2fs: support xattr security labels
f2fs: fix iget/iput of dir during recovery
...
Pull GFS2 updates from Steven Whitehouse:
"There are a few bug fixes for various, mostly very minor corner cases,
plus some interesting new features.
The new features include atomic_open whose main benefit will be the
reduction in locking overhead in case of combined lookup/create and
open operations, sorting the log buffer lists by block number to
improve the efficiency of AIL writeback, and aggressively issuing
revokes in gfs2_log_flush to reduce overhead when dropping glocks."
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw:
GFS2: Reserve journal space for quota change in do_grow
GFS2: Fix fstrim boundary conditions
GFS2: fix warning message
GFS2: aggressively issue revokes in gfs2_log_flush
GFS2: fix regression in dir_double_exhash
GFS2: Add atomic_open support
GFS2: Only do one directory search on create
GFS2: fix error propagation in init_threads()
GFS2: Remove no-op wrapper function
GFS2: Cocci spatch "ptr_ret.spatch"
GFS2: Eliminate gfs2_rg_lops
GFS2: Sort buffer lists by inplace block number
category, of note is a fix for on-line resizing file systems where the
block size is smaller than the page size (i.e., file systems 1k blocks
on x86, or more interestingly file systems with 4k blocks on Power or
ia64 systems.)
In the cleanup category, the ext4's punch hole implementation was
significantly improved by Lukas Czerner, and now supports bigalloc
file systems. In addition, Jan Kara significantly cleaned up the
write submission code path. We also improved error checking and added
a few sanity checks.
In the optimizations category, two major optimizations deserve
mention. The first is that ext4_writepages() is now used for
nodelalloc and ext3 compatibility mode. This allows writes to be
submitted much more efficiently as a single bio request, instead of
being sent as individual 4k writes into the block layer (which then
relied on the elevator code to coalesce the requests in the block
queue). Secondly, the extent cache shrink mechanism, which was
introduce in 3.9, no longer has a scalability bottleneck caused by the
i_es_lru spinlock. Other optimizations include some changes to reduce
CPU usage and to avoid issuing empty commits unnecessarily.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=SwaI
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 update from Ted Ts'o:
"Lots of bug fixes, cleanups and optimizations. In the bug fixes
category, of note is a fix for on-line resizing file systems where the
block size is smaller than the page size (i.e., file systems 1k blocks
on x86, or more interestingly file systems with 4k blocks on Power or
ia64 systems.)
In the cleanup category, the ext4's punch hole implementation was
significantly improved by Lukas Czerner, and now supports bigalloc
file systems. In addition, Jan Kara significantly cleaned up the
write submission code path. We also improved error checking and added
a few sanity checks.
In the optimizations category, two major optimizations deserve
mention. The first is that ext4_writepages() is now used for
nodelalloc and ext3 compatibility mode. This allows writes to be
submitted much more efficiently as a single bio request, instead of
being sent as individual 4k writes into the block layer (which then
relied on the elevator code to coalesce the requests in the block
queue). Secondly, the extent cache shrink mechanism, which was
introduce in 3.9, no longer has a scalability bottleneck caused by the
i_es_lru spinlock. Other optimizations include some changes to reduce
CPU usage and to avoid issuing empty commits unnecessarily."
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (86 commits)
ext4: optimize starting extent in ext4_ext_rm_leaf()
jbd2: invalidate handle if jbd2_journal_restart() fails
ext4: translate flag bits to strings in tracepoints
ext4: fix up error handling for mpage_map_and_submit_extent()
jbd2: fix theoretical race in jbd2__journal_restart
ext4: only zero partial blocks in ext4_zero_partial_blocks()
ext4: check error return from ext4_write_inline_data_end()
ext4: delete unnecessary C statements
ext3,ext4: don't mess with dir_file->f_pos in htree_dirblock_to_tree()
jbd2: move superblock checksum calculation to jbd2_write_superblock()
ext4: pass inode pointer instead of file pointer to punch hole
ext4: improve free space calculation for inline_data
ext4: reduce object size when !CONFIG_PRINTK
ext4: improve extent cache shrink mechanism to avoid to burn CPU time
ext4: implement error handling of ext4_mb_new_preallocation()
ext4: fix corruption when online resizing a fs with 1K block size
ext4: delete unused variables
ext4: return FIEMAP_EXTENT_UNKNOWN for delalloc extents
jbd2: remove debug dependency on debug_fs and update Kconfig help text
jbd2: use a single printk for jbd_debug()
...
Pull VFS patches (part 1) from Al Viro:
"The major change in this pile is ->readdir() replacement with
->iterate(), dealing with ->f_pos races in ->readdir() instances for
good.
There's a lot more, but I'd prefer to split the pull request into
several stages and this is the first obvious cutoff point."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (67 commits)
[readdir] constify ->actor
[readdir] ->readdir() is gone
[readdir] convert ecryptfs
[readdir] convert coda
[readdir] convert ocfs2
[readdir] convert fatfs
[readdir] convert xfs
[readdir] convert btrfs
[readdir] convert hostfs
[readdir] convert afs
[readdir] convert ncpfs
[readdir] convert hfsplus
[readdir] convert hfs
[readdir] convert befs
[readdir] convert cifs
[readdir] convert freevxfs
[readdir] convert fuse
[readdir] convert hpfs
reiserfs: switch reiserfs_readdir_dentry to inode
reiserfs: is_privroot_deh() needs only directory inode, actually
...
When sync does it's WB_SYNC_ALL writeback, it issues data Io and
then immediately waits for IO completion. This is done in the
context of the flusher thread, and hence completely ties up the
flusher thread for the backing device until all the dirty inodes
have been synced. On filesystems that are dirtying inodes constantly
and quickly, this means the flusher thread can be tied up for
minutes per sync call and hence badly affect system level write IO
performance as the page cache cannot be cleaned quickly.
We already have a wait loop for IO completion for sync(2), so cut
this out of the flusher thread and delegate it to wait_sb_inodes().
Hence we can do rapid IO submission, and then wait for it all to
complete.
Effect of sync on fsmark before the patch:
FSUse% Count Size Files/sec App Overhead
.....
0 640000 4096 35154.6 1026984
0 720000 4096 36740.3 1023844
0 800000 4096 36184.6 916599
0 880000 4096 1282.7 1054367
0 960000 4096 3951.3 918773
0 1040000 4096 40646.2 996448
0 1120000 4096 43610.1 895647
0 1200000 4096 40333.1 921048
And a single sync pass took:
real 0m52.407s
user 0m0.000s
sys 0m0.090s
After the patch, there is no impact on fsmark results, and each
individual sync(2) operation run concurrently with the same fsmark
workload takes roughly 7s:
real 0m6.930s
user 0m0.000s
sys 0m0.039s
IOWs, sync is 7-8x faster on a busy filesystem and does not have an
adverse impact on ongoing async data write operations.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
My recent truncate patch uncovered this bug, but I can reproduce it without the
truncate patch. If you mount with -o compress-force, do a direct write to some
area, do a buffered write to some other area, and then do a direct read you will
get the wrong data for where you did the buffered write. This is because the
generic direct io helpers only call filemap_write_and_wait once, and for
compression we need it twice. So to be safe add the btrfs_wait_ordered_range to
the start of the direct io function to make sure any compressed writes have
truly been written. This patch makes xfstests 130 pass when you mount with -o
compress-force=lzo. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
There is another bug in the tree mod log stuff in that we're calling
tree_mod_log_free_eb every single time a block is cow'ed. The problem with this
is that if this block is shared by multiple snapshots we will call this multiple
times per block, so if we go to rewind the mod log for this block we'll BUG_ON()
in __tree_mod_log_rewind because we try to rewind a free twice. We only want to
call tree_mod_log_free_eb if we are actually freeing the block. With this patch
I no longer hit the panic in __tree_mod_log_rewind. Thanks,
Cc: stable@vger.kernel.org
Reviewed-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
We need to hold the tree mod log lock in __tree_mod_log_rewind since we walk
forward in the tree mod entries, otherwise we'll end up with random entries and
trip the BUG_ON() at the front of __tree_mod_log_rewind. This fixes the panics
people were seeing when running
find /whatever -type f -exec btrfs fi defrag {} \;
Thansk,
Cc: stable@vger.kernel.org
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
I missed fixing the backref stuff when I introduced the skinny metadata. If you
try and do things like snapshot aware defrag with skinny metadata you are going
to see tons of warnings related to the backref count being less than 0. This is
because the delayed refs will be found for stuff just fine, but it won't find
the skinny metadata extent refs. With this patch I'm not seeing warnings
anymore. Thanks,
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Several users reported this crash of NULL pointer or general protection,
the story is that we add a rbtree for speedup ulist iteration, and we
use krealloc() to address ulist growth, and krealloc() use memcpy to copy
old data to new memory area, so it's OK for an array as it doesn't use
pointers while it's not OK for a rbtree as it uses pointers.
So krealloc() will mess up our rbtree and it ends up with crash.
Reviewed-by: Wang Shilong <wangsl-fnst@cn.fujitsu.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
- It makes no sense that we deal with a inode in the dead tree.
- fix the race between dio and page copy by waiting the dio completion
- avoid the page copy vs truncate/punch hole
- check if the page is in the page cache or not
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
- It make no sense that we continue to do something after the error
happened, just go back with this patch.
- remove some check of copy_nocow_pages_for_inode(), such as page check
after write, inode check in the end of the function, because we are
sure they exist.
- remove the unnecessary goto in the return value check of the write
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
When adjusting the enospc rules for relocation I ran into a deadlock because we
were relocating the only system chunk and that forced us to try and allocate a
new system chunk while holding locks in the chunk tree, which caused us to
deadlock. To fix this I've moved all of the dev extent addition and chunk
addition out to the delayed chunk completion stuff. We still keep the in-memory
stuff which makes sure everything is consistent.
One change I had to make was to search the commit root of the device tree to
find a free dev extent, and hold onto any chunk em's that we allocated in that
transaction so we do not allocate the same dev extent twice. This has the side
effect of fixing a bug with balance that has been there ever since balance
existed. Basically you can free a block group and it's dev extent and then
immediately allocate that dev extent for a new block group and write stuff to
that dev extent, all within the same transaction. So if you happen to crash
during a balance you could come back to a completely broken file system. This
patch should keep these sort of things from happening in the future since we
won't be able to allocate free'd dev extents until after the transaction
commits. This has passed all of the xfstests and my super annoying stress test
followed by a balance. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
I hit a weird problem were my root item had been deleted but the orphan item had
not. This isn't necessarily a problem, but it keeps the file system from being
mounted. To fix this we just need to axe the orphan item if we can't find the
fs root when we're putting them altogether. With this patch I was able to
successfully mount my file system. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Now reading the data from the target device of the replace operation is allowed,
so the mirror number that is greater than the stripes number of a chunk is valid,
we will tune it when we find there is no target device later. Fix it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Using the structure btrfs_sector_sum to keep the checksum value is
unnecessary, because the extents that btrfs_sector_sum points to are
continuous, we can find out the expected checksums by btrfs_ordered_sum's
bytenr and the offset, so we can remove btrfs_sector_sum's bytenr. After
removing bytenr, there is only one member in the structure, so it makes
no sense to keep the structure, just remove it, and use a u32 array to
store the checksum value.
By this change, we don't use the while loop to get the checksums one by
one. Now, we can get several checksum value at one time, it improved the
performance by ~74% on my SSD (31MB/s -> 54MB/s).
test command:
# dd if=/dev/zero of=/mnt/btrfs/file0 bs=1M count=1024 oflag=sync
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
We always just try and reserve data space when we write, but if we are out of
space but have prealloc'ed extents we should still successfully write. This
patch will try and see if we can write to prealloc'ed space and if we can go
ahead and allow the write to continue. With this patch we now pass xfstests
generic/274. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
try_to_writeback_inodes_sb_nr returns 1 if writeback is already underway, which
is completely fraking useless for us as we need to make sure pages are actually
written before we go and check if there are ordered extents. So replace this
with an open coding of try_to_writeback_inodes_sb_nr minus the writeback
underway check so that we are sure to actually have flushed some dirty pages out
and will have ordered extents to use. With this patch xfstests generic/273 now
passes. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
There are all of these checks in the ENOSPC code to see if committing the
transaction would free up enough space to make the allocation. This is because
early on we just committed the transaction and hoped and prayed, which resulted
in cases where it took _forever_ to get an ENOSPC when we really were out of
space. So we check space_info->bytes_pinned, except this isn't completely true
because it doesn't account for space we may free but are stuck in delayed refs.
So tests like xfstests 226 would fail because we wouldn't commit the transaction
to free up the data space. So instead add a percpu counter that will be a
little fuzzier, it will add bytes as soon as we try to free up the space, and
remove any space it doesn't actually free up when we get around to doing the
actual free. We then 0 out this counter every transaction period so we have a
better idea of how much space we will actually free up by committing this
transaction. With this patch we now pass xfstests 226. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
We have an optimization that will go ahead and cache no acls on an inode if
there are no xattrs on the inode. This saves us a lookup later to check the
acls for writes or any other access. The problem is I use selinux so I always
have an xattr on inodes, so make this test a little smarter and check for the
actual acl hash on the key and if it isn't there then we still get to cache no
acl which makes everybody who uses selinux a little happier. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Incorporate the addition of hsize argument in write_buf callback
of pstore. This was forgotten in
6bbbca7359
pstore: Pass header size in the pstore write callback
Causing a build failure when ftrace and pstore are enabled.
Signed-off-by: Aruna Balakrishnaiah <aruna@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
If user requests many data writes and fsync together, the last updated i_size
should be stored to the inode block consistently.
But, previous write_end just marks the inode as dirty and doesn't update its
metadata into its inode block.
After that, fsync just writes the inode block with newly updated data index
excluding inode metadata updates.
So, this patch introduces write_end in which updates inode block too when the
i_size is changed.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
As destroy_fsync_dnodes() is a simple list-cleanup func, so delete the unused
and unrelated f2fs_sb_info argument of it.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch removes check_prefree_segments initially designed to enhance the
performance by narrowing the range of LBA usage across the whole block device.
When allocating a new segment, previous f2fs tries to find proper prefree
segments, and then, if finds a segment, it reuses the segment for further
data or node block allocation.
However, I found that this was totally wrong approach since the prefree segments
have several data or node blocks that will be used by the roll-forward mechanism
operated after sudden-power-off.
Let's assume the following scenario.
/* write 8MB with fsync */
for (i = 0; i < 2048; i++) {
offset = i * 4096;
write(fd, offset, 4KB);
fsync(fd);
}
In this case, naive segment allocation sequence will be like:
data segment: x, x+1, x+2, x+3
node segment: y, y+1, y+2, y+3.
But, if we can reuse prefree segments, the sequence can be like:
data segment: x, x+1, y, y+1
node segment: y, y+1, y+2, y+3.
Because, y, y+1, and y+2 became prefree segments one by one, and those are
reused by data allocation.
After conducting this workload, we should consider how to recover the latest
inode with its data.
If we reuse the prefree segments such as y or y+1, we lost the old node blocks
so that f2fs even cannot start roll-forward recovery.
Therefore, I suggest that we should remove reusing prefree segments.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch simplifies list operations in find_gc_inode and add_gc_inode.
Just simple code cleanup.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
[Jaegeuk Kim: add description]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Optimize the while loop condition
Since this condition will always be true and while loop will
be terminated by the following condition in code:
if (segno >= TOTAL_SEGS(sbi))
break;
Hence we can replace the while loop condition with while(1)
instead of always checking for segno to be less than Total segs.
Also we do not need to use TOTAL_SEGS() everytime. We can store
this value in a local variable since this value is constant.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Pankaj Kumar <pankaj.km@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch should fix the following bug reported by kbuild test robot.
fs/f2fs/recovery.c:233:33: sparse: incorrect type in assignment
(different base types)
parse warnings: (new ones prefixed by >>)
>> recovery.c:233: sparse: incorrect type in assignment (different base types)
recovery.c:233: expected unsigned int [unsigned] [assigned] ofs_in_node
recovery.c:233: got restricted __le16 [assigned] [usertype] ofs_in_node
>> recovery.c:238: sparse: incorrect type in assignment (different base types)
recovery.c:238: expected unsigned int [unsigned] ofs_in_node
recovery.c:238: got restricted __le16 [assigned] [usertype] ofs_in_node
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
While calculating CRC for the checkpoint block, we use __u32, but when storing
the crc value to the disk, we use __le32.
Let's fix the inconsistency.
Reported-and-Tested-by: Oded Gabbay <ogabbay@advaoptical.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This case shouldn't happen--the administrator shouldn't really allow
other applications access to the export until clients have had the
chance to reclaim their state--but if it does then we should set the
"return this lease immediately" bit on the reply. That still leaves
some small races, but it's the best the protocol allows us to do in the
case a lease is ripped out from under us....
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This reverts commit eb2099f31b "nfsd4:
release lockowners on last unlock in 4.1 case". Trond identified
language in rfc 5661 section 8.2.4 which forbids this behavior:
Stateids associated with byte-range locks are an exception.
They remain valid even if a LOCKU frees all remaining locks, so
long as the open file with which they are associated remains
open, unless the client frees the stateids via the FREE_STATEID
operation.
And bakeathon 2013 testing found a 4.1 freebsd client was getting an
incorrect BAD_STATEID return from a FREE_STATEID in the above situation
and then failing.
The spec language honestly was probably a mistake but at this point with
implementations already following it we're probably stuck with that.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We saw a v4.0 client's create fail as follows:
- open create succeeds and gets a read delegation
- client attempts to set mode on new file, gets DELAY while
server recalls delegation.
- client attempts a CLAIM_DELEGATE_CUR open using the
delegation, gets error because of new file mode.
This probably can't happen on a recent kernel since we're no longer
giving out delegations on create opens. Nevertheless, it's a
bug--reclaim opens should bypass permission checks.
Reported-by: Steve Dickson <steved@redhat.com>
Reported-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
A freebsd NFSv4.0 client was getting rare IO errors expanding a tarball.
A network trace showed the server returning BAD_XDR on the final getattr
of a getattr+write+getattr compound. The final getattr started on a
page boundary.
I believe the Linux client ignores errors on the post-write getattr, and
that that's why we haven't seen this before.
Cc: stable@vger.kernel.org
Reported-by: Rick Macklem <rmacklem@uoguelph.ca>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The nfs4_open_delegation logic is unecessarily baroque.
Also stop pretending we support write delegations in several places.
Some day we will support write delegations, but when that happens adding
back in these flag parameters will be the easy part. For now they're
just confusing.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
When an exclusive create is done with the mode bits
set (aka open(testfile, O_CREAT | O_EXCL, 0777)) this
causes a OPEN op followed by a SETATTR op. When a
read delegation is given in the OPEN, it causes
the SETATTR to delay with EAGAIN until the
delegation is recalled.
This patch caused exclusive creates to give out
a write delegation (which turn into no delegation)
which allows the SETATTR seamlessly succeed.
Signed-off-by: Steve Dickson <steved@redhat.com>
[bfields: do this for any CREATE, not just exclusive; comment]
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In testing I notice that some of the pynfs tests forget to send any
cb_sec flavors, and that we haven't necessarily errored out in that case
before.
I'll fix pynfs, but am also inclined to default to trying AUTH_NONE in
that case in case this is something clients actually do.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We don't support gss on the backchannel. We should state that fact up
front rather than just letting things continue and later making the
client try to figure out why the backchannel isn't working.
Trond suggested instead returning NFS4ERR_NOENT. I think it would be
tricky for the client to distinguish between the case "I don't support
gss on the backchannel" and "I can't find that in my cache, please
create another context and try that instead", and I'd prefer something
that currently doesn't have any other meaning for this operation, hence
the (somewhat arbitrary) NFS4ERR_ENCR_ALG_UNSUPP.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Do a minimal SP4_MACH_CRED implementation suggested by Trond, ignoring
the client-provided spo_must_* arrays and just enforcing credential
checks for the minimum required operations.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Store a pointer to the gss mechanism used in the rq_cred and cl_cred.
This will make it easier to enforce SP4_MACH_CRED, which needs to
compare the mechanism used on the exchange_id with that used on
protected operations.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Change Low Latency Sockets code for select and poll so that
when LLS is disabled sched_clock() is never called.
Also, avoid sending POLL_LL to sockets if disabled.
Reported-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
I introduced a new temporary variable "info" instead of
"m->m_info[mds]". Also I reversed the if condition and pulled
everything in one indent level.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Alex Elder <elder@inktank.com>
This patch makes the following improvements to the error handling
in the ceph_mdsmap_decode function:
- Add a NULL check for return value from kcalloc
- Make use of the variable err
Signed-off-by: Emil Goode <emilgoode@gmail.com>
Signed-off-by: Sage Weil <sage@inktank.com>
This has plagued us forever and I'm so over working around it. When we truncate
down to a non-page aligned offset we will call btrfs_truncate_page to zero out
the end of the page and write it back to disk, this will keep us from exposing
stale data if we truncate back up from that point. The problem with this is it
requires data space to do this, and people don't really expect to get ENOSPC
from truncate() for these sort of things. This also tends to bite the orphan
cleanup stuff too which keeps people from mounting. To get around this we can
just move this into btrfs_cont_expand() to make sure if we are truncating up
from a non-page size aligned i_size we will zero out the rest of this page so
that we don't expose stale data. This will give ENOSPC if you try to truncate()
up or if you try to write past the end of isize, which is much more reasonable.
This fixes xfstests generic/083 failing to mount because of the orphan cleanup
failing. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
This patch does two things. First we no longer explicitly read in the blocks
we're trying to readahead. For things like balance_level we may never actually
use the blocks so this just adds uneeded latency, and balance_level and
split_node will both read in the blocks they care about explicitly so if the
blocks need to be waited on it will be done there. Secondly we no longer drop
the path if we do readahead, we just set the path blocking before we call
reada_for_balance() and then we're good to go. Hopefully this will cut down on
the number of re-searches. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
This patch does two things, first it only does one call to
btrfs_buffer_uptodate() with the gen specified instead of once with 0 and then
again with gen specified. The other thing is to call btrfs_read_buffer() on the
buffer we've found instead of dropping it and then calling read_tree_block().
This will keep us from doing yet another radix tree lookup for a buffer we've
already found. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
A user reported a deadlock where the async submit thread was blocked on the
lock_extent() lock, and then everybody behind him was locked on the page lock
for the page he was holding. Looking at the code I noticed we do not unlock the
extent range when we get ENOSPC and goto retry. This is bad because we
immediately try to lock that range again to do the cow, which will cause a
deadlock. Fix this by unlocking the range. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
The comment is for btrfs_attach_transaction_barrier, not for
btrfs_attach_transaction. Fix the typo.
Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
Acked-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
We unconditionally search for the EXTENT_ITEM_KEY for metadata during balance,
and then check the key that we found to see if it is actually a
METADATA_ITEM_KEY, but this doesn't work right because METADATA is a higher key
value, so if what we are looking for happens to be the first item in the leaf
the search will dump us out at the previous leaf, and we won't find our item.
So instead do what we do everywhere else, search for the skinny extent first and
if we don't find it go back and re-search for the extent item. This patch fixes
the panic I was hitting when balancing a large file system with skinny extents.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Looking into this backref problem I noticed we're using a macro to what turns
out to essentially be a NULL check to see if we need to search the commit root.
I'm killing this, let's just do what everybody else does and checks if trans ==
NULL. I've also made it so we pass in the path to __resolve_indirect_refs which
will have the search_commit_root flag set properly already and that way we can
avoid allocating another path when we have a perfectly good one to use. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
A user reported scrub taking up an unreasonable amount of ram as it ran. This
is because we lookup the csums for the extent we're scrubbing but don't free it
up until after we're done with the scrub, which means we can take up a whole lot
of ram. This patch fixes this by dropping the csums once we're done with the
extent we've scrubbed. The user reported this to fix their problem. Thanks,
Reported-and-tested-by: Remco Hosman <remco@hosman.xs4all.nl>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Dave has this fs_mark script that can make btrfs abort with sufficient amount of
ram. This is because with more ram we can keep more dirty metadata in cache
which in a round about way makes for many more pending delayed refs. What
happens is we end up not throttling the transaction enough so when we go to
commit the transaction when we've completely filled the file system we'll
abort() because we use all of the space in the global reserve and we still have
delayed refs to run. To fix this we need to make the delayed ref flushing and
the transaction throttling dependant upon the number of delayed refs that we
have instead of how much reserved space is left in the global reserve. With
this patch we not only stop aborting transactions but we also get a smoother run
speed with fs_mark and it makes us about 10% faster. Thanks,
Reported-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
I hit a hang when run_delayed_refs returned an error in the beginning of
btrfs_commit_transaction. If we decide we need to commit the transaction in
btrfs_end_transaction we'll set BLOCKED and start to commit, but if we get an
error this early on we'll just exit without committing. This is fine, except
that anybody else who tried to start a transaction will sit in
wait_current_trans() since we're set to BLOCKED and we never set it to something
else and woke people up. To fix this we want to check for trans->aborted
everywhere we wait for the transaction state to change, and make
btrfs_abort_transaction() wake up any waiters there may be. All the callers
will notice that the transaction has aborted and exit out properly. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
I hit a deadlock because we aborted when flushing delayed refs but didn't wake
any of the other flushers up and so everybody was just sleeping forever. This
should fix the problem. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Fix the code comments for lzo compression workspace.
The buf item is used to store the decompressed data
and cbuf is used to store the compressed data.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Balance will create reloc_root for each fs root, and it's going to
record last_snapshot to filter shared blocks. The side effect of
setting last_snapshot is to break nocow attributes of files.
Since the extents are not shared by the relocation tree after the balance,
we can recover the old last_snapshot safely if no one snapshoted the
source tree. We fix the above problem by this way.
Reported-by: Kyle Gates <kylegates@hotmail.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Both hole punch and truncate use ext4_ext_rm_leaf() for removing
blocks. Currently we choose the last extent as the starting
point for removing blocks:
ex = EXT_LAST_EXTENT(eh);
This is OK for truncate but for hole punch we can optimize the extent
selection as the path is already initialized. We could use this
information to select proper starting extent. The code change in this
patch will not affect truncate as for truncate path[depth].p_ext will
always be NULL.
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If jbd2_journal_restart() fails the handle will have been disconnected
from the current transaction. In this situation, the handle must not
be used for for any jbd2 function other than jbd2_journal_stop().
Enforce this with by treating a handle which has a NULL transaction
pointer as an aborted handle, and issue a kernel warning if
jbd2_journal_extent(), jbd2_journal_get_write_access(),
jbd2_journal_dirty_metadata(), etc. is called with an invalid handle.
This commit also fixes a bug where jbd2_journal_stop() would trip over
a kernel jbd2 assertion check when trying to free an invalid handle.
Also move the responsibility of setting current->journal_info to
start_this_handle(), simplifying the three users of this function.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reported-by: Younger Liu <younger.liu@huawei.com>
Cc: Jan Kara <jack@suse.cz>
Translate the bitfields used in various flags argument to strings to
make the tracepoint output more human-readable.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The function mpage_released_unused_page() must only be called once;
otherwise the kernel will BUG() when the second call to
mpage_released_unused_page() tries to unlock the pages which had been
unlocked by the first call.
Also restructure the error handling so that we only give up on writing
the dirty pages in the case of ENOSPC where retrying the allocation
won't help. Otherwise, a transient failure, such as a kmalloc()
failure in calling ext4_map_blocks() might cause us to give up on
those pages, leading to a scary message in /var/log/messages plus data
loss.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Once we decrement transaction->t_updates, if this is the last handle
holding the transaction from closing, and once we release the
t_handle_lock spinlock, it's possible for the transaction to commit
and be released. In practice with normal kernels, this probably won't
happen, since the commit happens in a separate kernel thread and it's
unlikely this could all happen within the space of a few CPU cycles.
On the other hand, with a real-time kernel, this could potentially
happen, so save the tid found in transaction->t_tid before we release
t_handle_lock. It would require an insane configuration, such as one
where the jbd2 thread was set to a very high real-time priority,
perhaps because a high priority real-time thread is trying to read or
write to a file system. But some people who use real-time kernels
have been known to do insane things, including controlling
laser-wielding industrial robots. :-)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
Currently if we pass range into ext4_zero_partial_blocks() which covers
entire block we would attempt to zero it even though we should only zero
unaligned part of the block.
Fix this by checking whether the range covers the whole block skip
zeroing if so.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The function ext4_write_inline_data_end() can return an error. So we
need to assign it to a signed integer variable to check for an error
return (since copied is an unsigned int).
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Zheng Liu <wenqing.lz@taobao.com>
Cc: stable@vger.kernel.org
Scott Mayhew