Commit Graph

339 Commits

Author SHA1 Message Date
Linus Torvalds 57d19e80f4 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
  b43: fix comment typo reqest -> request
  Haavard Skinnemoen has left Atmel
  cris: typo in mach-fs Makefile
  Kconfig: fix copy/paste-ism for dell-wmi-aio driver
  doc: timers-howto: fix a typo ("unsgined")
  perf: Only include annotate.h once in tools/perf/util/ui/browsers/annotate.c
  md, raid5: Fix spelling error in comment ('Ofcourse' --> 'Of course').
  treewide: fix a few typos in comments
  regulator: change debug statement be consistent with the style of the rest
  Revert "arm: mach-u300/gpio: Fix mem_region resource size miscalculations"
  audit: acquire creds selectively to reduce atomic op overhead
  rtlwifi: don't touch with treewide double semicolon removal
  treewide: cleanup continuations and remove logging message whitespace
  ath9k_hw: don't touch with treewide double semicolon removal
  include/linux/leds-regulator.h: fix syntax in example code
  tty: fix typo in descripton of tty_termios_encode_baud_rate
  xtensa: remove obsolete BKL kernel option from defconfig
  m68k: fix comment typo 'occcured'
  arch:Kconfig.locks Remove unused config option.
  treewide: remove extra semicolons
  ...
2011-05-23 09:12:26 -07:00
NeilBrown b098636cf0 md: allow resync_start to be set while an array is active.
The sysfs attribute 'resync_start' (known internally as recovery_cp),
records where a resync is up to.  A value of 0 means the array is
not known to be in-sync at all.  A value of MaxSector means the array
is believed to be fully in-sync.

When the size of member devices of an array (RAID1,RAID4/5/6) is
increased, the array can be increased to match.  This process sets
resync_start to the old end-of-device offset so that the new part of
the array gets resynced.

However with RAID1 (and RAID6) a resync is not technically necessary
and may be undesirable.  So it would be good if the implied resync
after the array is resized could be avoided.

So: change 'resync_start' so the value can be changed while the array
is active, and as a precaution only allow it to be changed while
resync/recovery is 'frozen'.  Changing it once resync has started is
not going to be useful anyway.

This allows the array to be resized without a resync by:
  write 'frozen' to 'sync_action'
  write new size to 'component_size' (this will set resync_start)
  write 'none' to 'resync_start'
  write 'idle' to 'sync_action'.

Also slightly improve some tests on recovery_cp when resizing
raid1/raid5.  Now that an arbitrary value could be set we should be
more careful in our tests.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 15:52:21 +10:00
NeilBrown 6f8d0c77ce md: make error_handler functions more uniform and correct.
- there is no need to test_bit Faulty, as that was already done in
  md_error which is the only caller of these functions.
- MD_CHANGE_DEVS should be set *after* faulty is set to ensure
  metadata is updated correctly.
- spinlock should be held while updating ->degraded.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:38:44 +10:00
Jesper Juhl aeb878b096 md, raid5: Fix spelling error in comment ('Ofcourse' --> 'Of course').
There's a small typo in a comment in drivers/md/raid5.c - 'Of course' is
misspelled as 'Ofcourse'. This patch fixes the spelling error.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-10 10:18:36 +02:00
Randy Dunlap d76c8420c3 raid5: fix build error, sector_t usage
Change <sectors> from unsigned long long to sector_t.
This matches its source field.

  ERROR: "__udivdi3" [drivers/md/raid456.ko] undefined!

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-21 10:00:00 -07:00
NeilBrown 3b71bd9337 md: Fix dev_sectors on takeover from raid0 to raid4/5
A raid0 array doesn't set 'dev_sectors' as each device might
contribute a different number of sectors.
So when converting to a RAID4 or RAID5 we need to set dev_sectors
as they need the number.
We have already verified that in fact all devices do contribute
the same number of sectors, so use that number.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-04-20 15:38:18 +10:00
NeilBrown 2b7da309ff md/raid5: remove setting of ->queue_lock
We previously needed to set ->queue_lock to match the raid5
device_lock so we could safely use queue_flag_* operations (e.g. for
plugging). which test the ->queue_lock is in fact locked.

However that need has completely gone away and is unlikely to come
back to remove this now-pointless setting.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-04-20 15:38:07 +10:00
NeilBrown 7c13edc875 md: incorporate new plugging into raid5.
In raid5 plugging is used for 2 things:
 1/ collecting writes that require a bitmap update
 2/ collecting writes in the hope that we can create full
    stripes - or at least more-full.

We now release these different sets of stripes when plug_cnt
is zero.

Also in make_request, we call mddev_check_plug to hopefully increase
plug_cnt, and wake up the thread at the end if plugging wasn't
achieved for some reason.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-04-18 18:25:43 +10:00
NeilBrown 482c083492 md - remove old plugging code.
md has some plugging infrastructure for RAID5 to use because the
normal plugging infrastructure required a 'request_queue', and when
called from dm, RAID5 doesn't have one of those available.

This relied on the ->unplug_fn callback which doesn't exist any more.

So remove all of that code, both in md and raid5.  Subsequent patches
with restore the plugging functionality.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-04-18 18:25:42 +10:00
NeilBrown e1dfa0a297 md: use new plugging interface for RAID IO.
md/raid submits a lot of IO from the various raid threads.
So adding start/finish plug calls to those so that some
plugging happens.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-04-18 18:25:41 +10:00
Jens Axboe 7eaceaccab block: remove per-queue plugging
Code has been converted over to the new explicit on-stack plugging,
and delay users have been converted to use the new API for that.
So lets kill off the old plugging along with aops->sync_page().

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10 08:52:07 +01:00
NeilBrown 50da084096 md: don't abort checking spares as soon as one cannot be added.
As spares can be added manually before a reshape starts, we need to
find them all to mark some of them as in_sync.

Previously we would abort looking for spares when we found an
unallocated spare what could not be added to the array (implying there
was no room for new spares).  However already-added spares could be
later in the list, so we need to keep searching.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-01-31 11:57:43 +11:00
NeilBrown 469518a345 md: fix the test for finding spares in raid5_start_reshape.
As spares can be added to the array before the reshape is started,
we need to find and count them when checking there are enough.
The array could have been degraded, so we need to check all devices,
no just those out side of the range of devices in the array before
the reshape.

So instead of checking the index, check the In_sync flag as that
reliably tells if the device is a spare or this purpose.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-01-31 11:57:43 +11:00
NeilBrown 87a8dec91e md: simplify some 'if' conditionals in raid5_start_reshape.
There are two consecutive 'if' statements.

 if (mddev->delta_disks >= 0)
      ....
 if (mddev->delta_disks > 0)

The code in the second is equally valid if delta_disks == 0, and these
two statements are the only place that 'added_devices' is used.

So make them a single if statement, make added_devices a local
variable, and re-indent it all.

No functional change.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-01-31 11:57:43 +11:00
NeilBrown 1a940fcee3 md/raid5: handle manually-added spares in start_reshape.
It is possible to manually add spares to specific slots before
starting a reshape.
raid5_start_reshape should recognised this possibility and include
it in the accounting.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-01-14 09:14:34 +11:00
NeilBrown 75d3da43cb md: Don't let implementation detail of curr_resync leak out through sysfs.
mddev->curr_resync has artificial values of '1' and '2' which are used
by the code which ensures only one resync is happening at a time on
any given device.

These values are internal and should never be exposed to user-space
(except when translated appropriately as in the 'pending' status in
/proc/mdstat).

Unfortunately they are as ->curr_resync is assigned to
->curr_resync_completed and that value is directly visible through
sysfs.

So change the assignments to ->curr_resync_completed to get the same
valued from elsewhere in a form that doesn't have the magic '1' or '2'
values.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-01-14 09:14:34 +11:00
Jonathan Brassow 43c73ca43b md/raid5: use sysfs_notify_dirent_safe to avoid NULL pointer
With the module parameter 'start_dirty_degraded' set,
raid5_spare_active() previously called sysfs_notify_dirent() with a NULL
argument (rdev->sysfs_state) when a rebuild finished.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2011-01-14 09:14:33 +11:00
Joe Perches 067032bc62 md: Fix single printks with multiple KERN_<level>s
Noticed-by: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2011-01-14 09:14:33 +11:00
NeilBrown a167f66324 md: use separate bio pool for each md device.
bio_clone and bio_alloc allocate from a common bio pool.
If an md device is stacked with other devices that use this pool, or under
something like swap which uses the pool, then the multiple calls on
the pool can cause deadlocks.

So allocate a local bio pool for each md array and use that rather
than the common pool.

This pool is used both for regular IO and metadata updates.

Signed-off-by: NeilBrown <neilb@suse.de>
2010-10-28 17:36:15 +11:00
NeilBrown 57dab0bdf6 md: use sector_t in bitmap_get_counter
bitmap_get_counter returns the number of sectors covered
by the counter in a pass-by-reference variable.
In some cases this can be very large, so make it a sector_t
for safety.

Signed-off-by: NeilBrown <neilb@suse.de>
2010-10-28 17:32:26 +11:00
Tejun Heo e9c7469bb4 md: implment REQ_FLUSH/FUA support
This patch converts md to support REQ_FLUSH/FUA instead of now
deprecated REQ_HARDBARRIER.  In the core part (md.c), the following
changes are notable.

* Unlike REQ_HARDBARRIER, REQ_FLUSH/FUA don't interfere with
  processing of other requests and thus there is no reason to mark the
  queue congested while FLUSH/FUA is in progress.

* REQ_FLUSH/FUA failures are final and its users don't need retry
  logic.  Retry logic is removed.

* Preflush needs to be issued to all member devices but FUA writes can
  be handled the same way as other writes - their processing can be
  deferred to request_queue of member devices.  md_barrier_request()
  is renamed to md_flush_request() and simplified accordingly.

For linear, raid0 and multipath, the core changes are enough.  raid1,
5 and 10 need the following conversions.

* raid1: Handling of FLUSH/FUA bio's can simply be deferred to
  request_queues of member devices.  Barrier related logic removed.

* raid5: Queue draining logic dropped.  FUA bit is propagated through
  biodrain and stripe resconstruction such that all the updated parts
  of the stripe are written out with FUA writes if any of the dirtying
  writes was FUA.  preread_active_stripes handling in make_request()
  is updated as suggested by Neil Brown.

* raid10: FUA bit needs to be propagated to write clones.

linear, raid0, 1, 5 and 10 tested.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Neil Brown <neilb@suse.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-10 12:35:38 +02:00
NeilBrown 6b96562054 md: provide appropriate return value for spare_active functions.
md_check_recovery expects ->spare_active to return 'true' if any
spares were activated, but none of them do, so the consequent change
in 'degraded' is not notified through sysfs.

So count the number of spares activated, subtract it from 'degraded'
just once, and return it.

Reported-by: Adrian Drzewiecki <adriand@vmware.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2010-08-18 12:04:32 +10:00
Adrian Drzewiecki e6ffbcb6cd md: Notify sysfs when RAID1/5/10 disk is In_sync.
When RAID1 is done syncing disks, it'll update the state
of synced rdevs to In_sync. But it neglected to notify
sysfs that the attribute changed. So any programs that
are waiting for an rdev's state to change will not be
woken.

(raid5/raid10 added by neilb)

Signed-off-by: Adrian Drzewiecki <adriand@vmware.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2010-08-18 11:49:02 +10:00
Linus Torvalds 3d30701b58 Merge branch 'for-linus' of git://neil.brown.name/md
* 'for-linus' of git://neil.brown.name/md: (24 commits)
  md: clean up do_md_stop
  md: fix another deadlock with removing sysfs attributes.
  md: move revalidate_disk() back outside open_mutex
  md/raid10: fix deadlock with unaligned read during resync
  md/bitmap:  separate out loading a bitmap from initialising the structures.
  md/bitmap: prepare for storing write-intent-bitmap via dm-dirty-log.
  md/bitmap: optimise scanning of empty bitmaps.
  md/bitmap: clean up plugging calls.
  md/bitmap: reduce dependence on sysfs.
  md/bitmap: white space clean up and similar.
  md/raid5: export raid5 unplugging interface.
  md/plug: optionally use plugger to unplug an array during resync/recovery.
  md/raid5: add simple plugging infrastructure.
  md/raid5: export is_congested test
  raid5: Don't set read-ahead when there is no queue
  md: add support for raising dm events.
  md: export various start/stop interfaces
  md: split out md_rdev_init
  md: be more careful setting MD_CHANGE_CLEAN
  md/raid5: ensure we create a unique name for kmem_cache when mddev has no gendisk
  ...
2010-08-10 15:38:19 -07:00
Christoph Hellwig 7b6d91daee block: unify flags for struct bio and struct request
Remove the current bio flags and reuse the request flags for the bio, too.
This allows to more easily trace the type of I/O from the filesystem
down to the block driver.  There were two flags in the bio that were
missing in the requests:  BIO_RW_UNPLUG and BIO_RW_AHEAD.  Also I've
renamed two request flags that had a superflous RW in them.

Note that the flags are in bio.h despite having the REQ_ name - as
blkdev.h includes bio.h that is the only way to go for now.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:20:39 +02:00
NeilBrown 9f7c222001 md/raid5: export raid5 unplugging interface.
Also remove remaining accesses to ->queue and ->gendisk when ->queue
is NULL (As it is in a DM target).

Signed-off-by: NeilBrown <neilb@suse.de>
2010-07-26 12:53:10 +10:00
NeilBrown 252ac5221a md/plug: optionally use plugger to unplug an array during resync/recovery.
If an array doesn't have a 'queue' then md_do_sync cannot
unplug it.
In that case it will have a 'plugger', so make that available
to the mddev, and use it to unplug the array if needed.

Signed-off-by: NeilBrown <neilb@suse.de>
2010-07-26 12:53:08 +10:00
NeilBrown 2ac8740151 md/raid5: add simple plugging infrastructure.
md/raid5 uses the plugging infrastructure provided by the block layer
and 'struct request_queue'.  However when we plug raid5 under dm there
is no request queue so we cannot use that.

So create a similar infrastructure that is much lighter weight and use
it for raid5.

Signed-off-by: NeilBrown <neilb@suse.de>
2010-07-26 12:53:08 +10:00
NeilBrown 11d8a6e371 md/raid5: export is_congested test
the dm module will need this for dm-raid45.

Also only access ->queue->backing_dev_info->congested_fn
if ->queue actually exists.  It won't in a dm target.

Signed-off-by: NeilBrown <neilb@suse.de>
2010-07-26 12:52:29 +10:00
NeilBrown 4a5add4995 raid5: Don't set read-ahead when there is no queue
dm-raid456 does not provide a 'queue' for raid5 to use,
so we must make raid5 stop depending on the queue.

First: read_ahead
dm handles read-ahead adjustment fully in userspace, so
simply don't do any readahead adjustments if there is
no queue.

Also re-arrange code slightly so all the accesses to ->queue are
together.

Finally, move the blk_queue_merge_bvec function into the 'if' as
the ->split_io setting in dm-raid456 has the same effect.

Signed-off-by: NeilBrown <neilb@suse.de>
2010-07-26 12:52:27 +10:00
NeilBrown f4be6b43f1 md/raid5: ensure we create a unique name for kmem_cache when mddev has no gendisk
We will shortly allow md devices with no gendisk (they are attached to
a dm-target instead).  That will cause mdname() to return 'mdX'.
There is one place where mdname really needs to be unique: when
creating the name for a slab cache.
So in that case, if there is no gendisk, you the address of the mddev
formatted in HEX to provide a unique name.

Signed-off-by: NeilBrown <neilb@suse.de>
2010-07-26 12:52:26 +10:00
NeilBrown c41d4ac40d md/raid5: factor out code for changing size of stripe cache.
Separate the actual 'change' code from the sysfs interface
so that it can eventually be called internally.

Signed-off-by: NeilBrown <neilb@suse.de>
2010-07-21 13:28:15 +10:00
NeilBrown 00bcb4ac7e md: reduce dependence on sysfs.
We will want md devices to live as dm targets where sysfs is not
visible.  So allow md to not connect to sysfs.

Signed-off-by: NeilBrown <neilb@suse.de>
2010-07-21 13:27:53 +10:00
NeilBrown 3424bf6a77 md/raid5: don't include 'spare' drives when reshaping to fewer devices.
There are few situations where it would make any sense to add a spare
when reducing the number of devices in an array, but it is
conceivable:  A 6 drive RAID6 with two missing devices could be
reshaped to a 5 drive RAID6, and a spare could become available
just in time for the reshape, but not early enough to have been
recovered first.  'freezing' recovery can make this easy to
do without any races.

However doing such a thing is a bad idea.  md will not record the
partially-recovered state of the 'spare' and when the reshape
finished it will think that the spare is still spare.
Easiest way to avoid this confusion is to simply disallow it.

Signed-off-by: NeilBrown <neilb@suse.de>
2010-06-24 13:36:04 +10:00
NeilBrown 2f11588249 md/raid5: add a missing 'continue' in a loop.
As the comment says, the tail of this loop only applies to devices
that are not fully in sync, so if In_sync was set, we should avoid
the rest of the loop.

This bug will hardly ever cause an actual problem.  The worst it
can do is allow an array to be assembled that is dirty and degraded,
which is not generally a good idea (without warning the sysadmin
first).

This will only happen if the array is RAID4 or a RAID5/6 in an
intermediate state during a reshape and so has one drive that is
all 'parity' - no data - while some other device has failed.

This is certainly possible, but not at all common.

Signed-off-by: NeilBrown <neilb@suse.de>
2010-06-24 13:35:49 +10:00
NeilBrown 415e72d034 md/raid5: Allow recovered part of partially recovered devices to be in-sync
During a recovery of reshape the early part of some devices might be
in-sync while the later parts are not.
We we know we are looking at an early part it is good to treat that
part as in-sync for stripe calculations.

This is particularly important for a reshape which suffers device
failure.  Treating the data as in-sync can mean the difference between
data-safety and data-loss.

Signed-off-by: NeilBrown <neilb@suse.de>
2010-06-24 13:35:39 +10:00
NeilBrown 674806d62f md/raid5: More careful check for "has array failed".
When we are reshaping an array, the device failure combinations
that cause us to decide that the array as failed are more subtle.

In particular, any 'spare' will be fully in-sync in the section
of the array that has already been reshaped, thus failures that
affect only that section are less critical.

So encode this subtlety in a new function and call it as appropriate.

The case that showed this problem was a 4 drive RAID5 to 8 drive RAID6
conversion where the last two devices failed.
This resulted in:

  good good good good incomplete good good failed failed

while converting a 5-drive RAID6 to 8 drive RAID5
The incomplete device causes the whole array to look bad,
bad as it was actually good for the section that had been
converted to 8-drives, all the data was actually safe.

Reported-by: Terry Morris <tbmorris@tbmorris.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2010-06-24 13:35:27 +10:00
NeilBrown 70fffd0bfa md: Don't update ->recovery_offset when reshaping an array to fewer devices.
When an array is reshaped to have fewer devices, the reshape proceeds
from the end of the devices to the beginning.

If a device happens to be non-In_sync (which is possible but rare)
we would normally update the ->recovery_offset as the reshape
progresses. However that would be wrong as the recover_offset records
that the early part of the device is in_sync, while in fact it would
only be the later part that is in_sync, and in any case the offset
number would be measured from the wrong end of the device.

Relatedly, if after a reshape a spare is discovered to not be
recoverred all the way to the end, not allow spare_active
to incorporate it in the array.

This becomes relevant in the following sample scenario:

A 4 drive RAID5 is converted to a 6 drive RAID6 in a combined
operation.
The RAID5->RAID6 conversion will cause a 5 drive to be included as a
spare, then the 5drive -> 6drive reshape will effectively rebuild that
spare as it progresses.  The 6th drive is treated as in_sync the whole
time as there is never any case that we might consider reading from
it, but must not because there is no valid data.

If we interrupt this reshape part-way through and reverse it to return
to a 5-drive RAID6 (or event a 4-drive RAID5), we don't want to update
the recovery_offset - as that would be wrong - and we don't want to
include that spare as active in the 5-drive RAID6 when the reversed
reshape completed and it will be mostly out-of-sync still.

Signed-off-by: NeilBrown <neilb@suse.de>
2010-06-24 13:35:18 +10:00
NeilBrown e4e11e385d md/raid5: avoid oops when number of devices is reduced then increased.
The entries in the stripe_cache maintained by raid5 are enlarged
when we increased the number of devices in the array, but not
shrunk when we reduce the number of devices.
So if entries are added after reducing the number of devices, we
much ensure to initialise the whole entry, not just the part that
is currently relevant.  Otherwise if we enlarge the array again,
we will reference uninitialised values.

As grow_buffers/shrink_buffer now want to use a count that is stored
explicity in the raid_conf, they should get it from there rather than
being passed it as a parameter.

Signed-off-by: NeilBrown <neilb@suse.de>
2010-06-24 13:35:02 +10:00
Akinobu Mita 55af6bb509 md: convert cpu notifier to return encapsulate errno value
By the previous modification, the cpu notifier can return encapsulate
errno value.  This converts the cpu notifiers for raid5.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 09:12:48 -07:00
NeilBrown 19fdb9eefb Merge commit '3ff195b011d7decf501a4d55aeed312731094796' into for-linus
Conflicts:
	drivers/md/md.c

- Resolved conflict in md_update_sb
- Added extra 'NULL' arg to new instance of sysfs_get_dirent.

Signed-off-by: NeilBrown <neilb@suse.de>
2010-05-22 08:31:36 +10:00
Gabriele A. Trombetti 7b0bb5368a md/raid6: Fix raid-6 read-error correction in degraded state
Fix: Raid-6 was not trying to correct a read-error when in
singly-degraded state and was instead dropping one more device, going to
doubly-degraded state. This patch fixes this behaviour.

Tested-by: Janos Haar <janos.haar@netcenter.hu>
Signed-off-by: Gabriele A. Trombetti <g.trombetti.lkrnl1213@logicschema.com>
Reported-by: Janos Haar <janos.haar@netcenter.hu>
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: stable@kernel.org
2010-05-18 15:28:00 +10:00
NeilBrown 0c55e02259 md/raid5: improve consistency of error messages.
Many 'printk' messages from the raid456 module mention 'raid5' even
though it may be a 'raid6' or even 'raid4' array.  This can cause
confusion.
Also the actual array name is not always reported and when it is
it is not reported consistently.

So change all the messages to start:
    md/raid:%s:
where '%s' becomes e.g. md3 to identify the particular array.

Signed-off-by: NeilBrown <neilb@suse.de>
2010-05-18 15:27:58 +10:00
Dan Williams f1b29bcae1 md/raid4: permit raid0 takeover
For consistency allow raid4 to takeover raid0 in addition to raid5 (with a
raid4 layout).

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-05-18 15:27:57 +10:00
NeilBrown 21a52c6d05 md: pass mddev to make_request functions rather than request_queue
We used to pass the personality make_request function direct
to the block layer so the first argument had to be a queue.
But now we have the intermediary md_make_request so it makes
at lot more sense to pass a struct mddev_s.
It makes it possible to have an mddev without its own queue too.

Signed-off-by: NeilBrown <neilb@suse.de>
2010-05-18 15:27:55 +10:00
NeilBrown b821eaa572 md: remove ->changed and related code.
We set ->changed to 1 and call check_disk_change at the end
of md_open so that bd_invalidated would be set and thus
partition rescan would happen appropriately.

Now that we call revalidate_disk directly, which sets bd_invalidates,
that indirection is no longer needed and can be removed.

Signed-off-by: NeilBrown <neilb@suse.de>
2010-05-18 15:27:53 +10:00
NeilBrown 490773268c md: move io accounting out of personalities into md_make_request
While I generally prefer letting personalities do as much as possible,
given that we have a central md_make_request anyway we may as well use
it to simplify code.
Also this centralises knowledge of ->gendisk which will help later.

Signed-off-by: NeilBrown <neilb@suse.de>
2010-05-18 15:27:52 +10:00
NeilBrown 2b7f22284d md/raid5: small tidyup in raid5_align_endio
Diving through ->queue to find mddev is unnecessarily complex - there
is an easier path to finding mddev, so use that.

Signed-off-by: NeilBrown <neilb@suse.de>
2010-05-18 15:27:50 +10:00
NeilBrown a78d38a1a1 md: add support for raid5 to raid4 conversion
This is unlikely to be wanted, but we may as well provide it
for completeness.

Signed-off-by: NeilBrown <neilb@suse.de>
2010-05-18 15:27:49 +10:00
Trela Maciej 54071b3808 md:Add support for Raid0->Raid5 takeover
Signed-off-by: Maciej Trela <maciej.trela@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2010-05-18 15:27:47 +10:00