Although on some systems va_end is a no-op, it is good practice
to use va_end, especially since the manual states:
"Each invocation of va_start() must be matched by a corresponding
invocation of va_end() in the same function."
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
"make allnoconfig" exists to ease testing of minimal configurations.
Documentation/SubmitChecklist includes a note to test with allnoconfig.
This helps catch missing dependencies on common-but-not-required
functionality, which might otherwise go unnoticed.
However, allnoconfig still leaves many symbols enabled, because they're
hidden behind CONFIG_EMBEDDED or CONFIG_EXPERT. For instance, allnoconfig
still has CONFIG_PRINTK and CONFIG_BLOCK enabled, so drivers don't
typically get build-tested with those disabled.
To address this, introduce a new Kconfig option "allnoconfig_y", used on
symbols which only exist to hide other symbols. Set it on CONFIG_EMBEDDED
(which then selects CONFIG_EXPERT). allnoconfig will then disable all the
symbols hidden behind those.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When a symbol changes type from tristate to bool, and was previously set to
'm', a subsequent silentoldconfig would warn about inconsistency, such as:
include/config/auto.conf:3014:warning: symbol value 'm' invalid for
HOTPLUG_PCI_PCIE
Seen by Linus with the merge in aa8032b (sequence to reproduce by Michal):
git checkout 1fe0135
make mrproper
make allmodconfig
make silentoldconfig
git checkout aa8032b
make allmodconfig
make silentoldconfig
Since HOTPLUG_PCI_PCIE changed from tristate to bool in aa8032b, it was
previously set to 'm' in auto.conf by the first allmodconfig+silentoldconfig,
but then was set to 'y' by the second allmodconfig. Then the second
silentoldconfig prints the warning.
The warning in this case is a spurious warning, which happens at the time
kconfig tries to detect symbols that have changed, to touch the empty
header files in include/config used for dependency-tracking by make.
Silence the warning when we read the old auto.conf file, since it is
perfectly legit that a symbol changed type since the previous call.
Thread in:
http://marc.info/?l=linux-pci&m=137569198904000&w=2
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
This reverts commit 8357b48549.
It breaks more stuff than it fixes.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Currently, randconfig does randomise choice entries, unless KCONFIG_ALLCONFIG
is specified.
For example, given those two files (Thomas' test-case):
---8<--- Config.test.in
config OPTIONA
bool "Option A"
choice
prompt "This is a choice"
config CHOICE_OPTIONA
bool "Choice Option A"
config CHOICE_OPTIONB
bool "Choice Option B"
endchoice
config OPTIONB
bool "Option B"
---8<--- Config.test.in
---8<--- config.defaults
CONFIG_OPTIONA=y
---8<--- config.defaults
And running:
./scripts/kconfig/conf --randconfig Config.test.in
does properly randomise the two choice symbols (and the two booleans).
However, running:
KCONFIG_ALLCONFIG=config.defaults \
./scripts/kconfig/conf --randconfig Config.test.in
does *not* reandomise the two choice entries, and only CHOICE_OPTIONA
will ever be selected. (OPTIONA will always be set (expected), and
OPTIONB will be be properly randomised (expected).)
This patch defers setting that a choice has a value until a symbol for
that choice is indeed set, so that choices are properly randomised when
KCONFIG_ALLCONFIG is set, but not if a symbol for that choice is set.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
---
Changes v3 -> v4
- fix previous issue where some choices would not be set, which would
cause silentoldconfig to ask for them and was then breaking this
workflow (as reported by Arnd and Sedat):
KCONFIG_ALLCONFIG=foo.defconfig make randconfig
make silentoldconfig </dev/nullo
which I have tested (3h28min!) with:
touch defconfig
for(( i=0; i<10000; i++ )); do
KCONFIG_ALLCONFIG=$(pwd)/defconfig make randconfig >/dev/null 2>&1
make silentoldconfig </dev/null >/dev/null 2>&1 || break
done
which did not break at all.
- change done in v3 (below) is already fixed by a previous patch
Changes v2 -> v3
- ensure only one symbol is set in a choice
Changes v1 -> v2:
- further postpone setting that a choice has a value until
one is indeed set
- do not print symbols that are part of an invisible choice
Because of choice-in-a-choice constructs, it can happen that not all
symbols are assigned a value during randconfig, leading in rare cases
to this situation:
---8<--- choice-in-choice.in
choice
bool "A/B/C"
config A
bool "A"
config B
bool "B"
if B
choice
bool "E/F"
config E
bool "E"
config F
bool "F"
endchoice
endif # B
config C
bool "C"
endchoice
---8<---
$ ./scripts/kconfig/conf --randconfig choice-in-choice.in
[--SNIP--]
$ ./scripts/kconfig/conf --silentoldconfig choice-in-choice.in </dev/null
[--SNIP--]
A/B/C
1. A (A)
> 2. B (B)
3. C (C)
choice[1-3]: 2
E/F
> 1. E (E) (NEW)
2. F (F) (NEW)
choice[1-2]: aborted!
Console input/output is redirected. Run 'make oldconfig' to update
configuration.
Fix this by looping in randconfig for as long as some symbol gets assigned
a value.
Note: this was spotted with the USB EHCI Debug Device Gadget (USB_G_DBGP),
which uses this choice-in-a-choice construct, and exhibits this problem.
The example above is just a stripped-down minimalist test-case.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Currently, randconfig may set more than one symbol in a given choice.
Given this config file:
config A
bool "A"
if A
choice
bool "B/C/D"
config B
bool "B"
config C
bool "C"
config D
bool "D"
endchoice
endif # A
Then randconfig generates such .config files (case where A is not set is not
shown below for brevity), and where only the right-most .config is valid:
CONFIG_A=y CONFIG_A=y CONFIG_A=y
CONFIG_B=y CONFIG_B=y CONFIG_B=y
CONFIG_C=y # CONFIG_C is not set # CONFIG_C is not set
# CONFIG_D is not set CONFIG_D=y # CONFIG_D is not set
That is, in a randomised choice, the first symbol is always selected,
and at most one other symbol may be selected.
This is due to symbol randomised in a choice not being properly flagged
as having a value.
Fix that by flagging those symbols adequately: have a user-defined value,
and be not valid (to force recalculation of the symbol).
Note: if the choice is not conditional, then the randomisation is properly
done.
Reported-by: Matthieu CASTET <matthieu.castet@parrot.com>
Signed-off-by: Matthieu CASTET <matthieu.castet@parrot.com>
[yann.morin.1998@free.fr: independently re-done the same patch as Matthieu,
as pointed out by Sedat]
Cc: Arnaud Lacombe <lacombar@gmail.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Currently the odds to set each symbol is (rounded):
booleans: y: 50% n: 50%
tristates: y: 33% m: 33% n: 33%
Introduce a KCONFIG_PROBABILITY environment variable to tweak the
probabilities (in percentage), as such:
KCONFIG_PROBABILITY y:n split yⓂ️n split
-----------------------------------------------------------------
[1] unset or empty 50 : 50 33 : 33 : 34
[2] N N : 100-N N/2 : N/2 : 100-N
N:M N+M : 100-(N+M) N : M : 100-(N+M)
N:M:L N : 100-N M : L : 100-(M+L)
[1] The current behaviour is kept as default, for backward compatibility
[2] The solution initially implemented by Peter for Buildroot, see:
http://git.buildroot.org/buildroot/commit/?id=3435c1afb5
Signed-off-by: Peter Korsgaard <jacmet@uclibc.org>
[yann.morin.1998@free.fr: add to Documentation/]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Currently, randconfig does randomise choice entries, unless KCONFIG_ALLCONFIG
is specified.
For example, given those two files (Thomas' test-case):
---8<--- Config.test.in
config OPTIONA
bool "Option A"
choice
prompt "This is a choice"
config CHOICE_OPTIONA
bool "Choice Option A"
config CHOICE_OPTIONB
bool "Choice Option B"
endchoice
config OPTIONB
bool "Option B"
---8<--- Config.test.in
---8<--- config.defaults
CONFIG_OPTIONA=y
---8<--- config.defaults
And running:
./scripts/kconfig/conf --randconfig Config.test.in
does properly randomise the two choice symbols (and the two booleans).
However, running:
KCONFIG_ALLCONFIG=config.defaults \
./scripts/kconfig/conf --randconfig Config.test.in
does *not* reandomise the two choice entries, and only CHOICE_OPTIONA
will ever be selected. (OPTIONA will always be set (expected), and
OPTIONB will be be properly randomised (expected).)
This patch defers setting that a choice has a value until a symbol for
that choice is indeed set, so that choices are properly randomised when
KCONFIG_ALLCONFIG is set, but not if a symbol for that choice is set.
Also, as a side-efect, this patch fixes the following case:
---8<---
choice
config OPTION_A
bool "Option A"
config OPTION_B
bool "Option B"
config OPTION_C
bool "Option C"
endchoice
---8<---
which could previously generate such .config files:
---8<--- ---8<---
CONFIG_OPTION_A=y CONFIG_OPTION_A=y
CONFIG_OPTION_B=y # CONFIG_OPTION_B is not set
# CONFIG_OPTION_C is not set CONFIG_OPTION_C=y
---8<--- ---8<---
Ie., the first entry in a choice is always set, plus zero or one of
the other options may be set.
This patch ensures that only one option may be set for a choice.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Arnaud Lacombe <lacombar@gmail.com>
---
Changes v2 -> v3
- ensure only one symbol is set in a choice
Changes v1 -> v2:
- further postpone setting that a choice has a value until
one is indeed set
- do not print symbols that are part of an invisible choice
For randconfig, if a list of required symbols is specified with
KCONFIG_ALLCONFIG, such symbols do not "have a value" as per
sym_has_value(), but have the "valid" flag set.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Because the modules' symbole (CONFIG_MODULES) may not yet be set when
we check a symbol's tristate capabilty, we'll always find that tristate
symbols are booleans, even if we randomly decided that to enable modules:
sym_get_type(sym) always return boolean for tristates when modules_sym
has not been previously set to 'y' *and* its value calculated *and* its
visibility calculated, both of which only occur after we randomly assign
values to symbols.
Fix that by looking at the raw type of symbols. Tristate set to 'm' will
be promoted to 'y' when their values will be later calculated.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
For some config options (CONFIG_EXTRA_FIRMWARE, for example), the length
of a config file line can exceed the 1024 byte buffer.
Switch from fgets to compat_getline to fix. compat_getline is an
internally implimented getline work-alike for portability purposes.
Signed-off-by: Cody Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
We've now fixed IS_ENABLED() and friends to not require any special
"__enabled_" prefixed versions of the normal Kconfig options, so delete
the last traces of them being generated.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit 953742c8fe.
Dumping two lines into autoconf.h for all existing Kconfig options
results in a giant file (~16k lines) we have to process each time we
compile something. We've weaned IS_ENABLED() and similar off of
requiring the __enabled_ definitions so now we can revert the change
which caused all the extra lines.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Running `oldconfig' after any of the following configuration change:
either trivial addition, such as:
config A
bool "A"
choice
prompt "Choice ?"
depends on A
config CHOICE_B
bool "Choice B"
config CHOICE_C
bool "Choice C"
endchoice
or more tricky change:
OLD KCONFIG | NEW KCONFIG
|
| config A
| bool "A"
|
choice | choice
prompt "Choice ?" | prompt "Choice ?"
|
config CHOICE_C | config CHOICE_C
bool "Choice C" | bool "Choice C"
|
config CHOICE_D | config CHOICE_D
bool "Choice D" | bool "Choice D"
endchoice |
| config CHOICE_E
| bool "Choice E"
| depends on A
| endchoice
will not cause the choice to be considered as NEW, and thus not be
asked. The cause of this behavior is that choice's novelty are computed
statically right after the saved configuration has been read. At this
point, the new dependency's value is still unknown and asserted to be
`no'. Moreover, no update to this decision is made afterward.
Correct this by dynamically evaluating a choice's novelty, and removing the
static evaluation.
Reported-and-tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Use the xfwrite wrapper function defined in lkc.h to check the return value of
fwrite and silence these warnings.
HOSTCC scripts/kconfig/zconf.tab.o
scripts/kconfig/zconf.tab.c: In function 'header_print_comment':
/usr/src/lto/scripts/kconfig/confdata.c:551:10: warning: ignoring return value of 'fwrite', declared with attribute warn_unused_result
scripts/kconfig/zconf.tab.c: In function 'kconfig_print_comment':
/usr/src/lto/scripts/kconfig/confdata.c:467:10: warning: ignoring return value of 'fwrite', declared with attribute warn_unused_result
Signed-off-by: Peter Foley <pefoley2@verizon.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
__enabled_<sym-name> are only generated on visible or selected entries, do not
reflect the purpose of its introduction.
Fix this by always generating these entries for named symbol.
Reported-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Replace the config_is_*() macros with a variant that allows for grepping
for usage of CONFIG_* options in the code. Usage:
if (IS_ENABLED(CONFIG_NUMA))
or
#if IS_ENABLED(CONFIG_NUMA)
The IS_ENABLED() macro evaluates to 1 if the argument is set (to either 'y'
or 'm'), IS_BUILTIN() tests if the option is 'y' and IS_MODULE() test if
the option is 'm'. Only boolean and tristate options are supported.
Reviewed-by: Arnaud Lacombe <lacombar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The specialized printer for headers (espectially autoconf.h) is missing
fixup code for S_HEX symbol's "0x" prefix. As long as kconfig does not
warn for such missing prefix, this code is needed. Fix this.
In the same time, fix some nits in `header_print_symbol()'.
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Broken-by: Arnaud Lacombe <lacombar@gmail.com>
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Reported-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Make conf_write_symbol() grammar agnostic to be able to use it from different
code path. These path pass a printer callback which will print a symbol's name
and its value in different format.
conf_write_symbol()'s job become mostly only to prepare a string for the
printer. This avoid to have to pass specialized flag to generic
functions
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
[mmarek: rebased on top of de12518 (kconfig: autogenerated config_is_xxx
macro)]
Signed-off-by: Michal Marek <mmarek@suse.cz>
For strings and integers, the config_is_xxx macros are useless and
sometimes misleading:
#define CONFIG_INITRAMFS_SOURCE ""
#define config_is_initramfs_source() 1
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
this will allow to use to use
if(config_is_xxx())
if(config_is_xxx_module())
in the code instead of
#ifdef CONFIG_xxx
#ifdef CONFIG_xxx_MODULE
and now let the compiler remove the non usefull code and not the
pre-processor
as done in the mach-types for arm as exmaple
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Replacing S_TRISTATE by S_BOOLEAN is a no-op for conf_write_symbol().
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
[mmarek: Fix unused variable warning in conf_write()]
Signed-off-by: Michal Marek <mmarek@suse.cz>
AUTOCONF_INCLUDED is not checked is not used within the tree and its parent
header, `autoconf.h', is safe to be re-included.
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
This prevents the buffers being overflowed when using a config
file with a long name. PATH_MAX is used elsewhere in the same
file, so use it here as well.
Signed-off-by: Will Newton <will.newton@imgtec.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
commit 8baefd30b5 of linux-next replaced
a `switch()' statement with some `if()' statements, but left `break's
in the `switch()' statement untouched. This cause read config loop to
exit and so "make oldconfig" is not much usable (see below).
> $ make oldconfig
><snip>
> scripts/kconfig/conf --oldconfig Kconfig
> #
> # using defaults found in /boot/config-2.6.34-ccs-r1
> #
> *
> * Restart config...
> *
> *
> * General setup
> *
> Prompt for development and/or incomplete code/drivers (EXPERIMENTAL) [N/y/?] (NEW)
(I've already have "CONFIG_EXPERIMENTAL=y" in the old config file. But
that's not read here.)
This patch should fix this problem.
Signed-off-by: Naohiro Aota <naota@elisp.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
With the upcoming dynamical configuration prefix, we can no longer assume that
the prefix will start by a 'C'. As such, we can no longer hardcode this value in
the `case ...:', so replace the `switch() { ... }' statement by a more flexible
'if () { ... }' statement.
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Michal Marek <mmarek@suse.cz>
This fixes:
% gmake LKC_GENPARSER=1 menuconfig
[...]
scripts/kconfig/confdata.c:739: error: 'errno' undeclared (first use in this function)
scripts/kconfig/confdata.c:739: error: (Each undeclared identifier is reported only once
scripts/kconfig/confdata.c:739: error: for each function it appears in.)
scripts/kconfig/confdata.c:739: error: 'ENOENT' undeclared (first use in this function)
triggered on NetBSD.
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
savedefconfig failed to save the correct minimal config
when it encountered a choice marked optional.
Consider following minimal configuration:
$cat Kconfig
choice
prompt "choice"
optional
config A
bool "a"
config B
bool "b"
endchoice
$cat .config | grep -v ^#
CONFIG_A=y
$conf --savedefconfig=defconfig Kconfig
would before this fix result in an empty file, because
kconfig would assume that CONFIG_A=y is a default value.
But because the choice is optional the default is that
both A and B are =n.
Fix so we handle optional choices correct.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
This fix facilitates fwrite() in both confdata.c and expr.c, either it
succeeds in writing, or an error occurs, or the end of file is reached.
Signed-off-by: Jean Sacren <sakiwit@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
If a minimal config did not specify the value
of all choice values, the resulting configuration
could have wrong values.
Consider following example:
config M
def_bool y
option modules
choice
prompt "choice list"
config A
tristate "a"
config B
tristate "b"
endchoice
With a defconfig like this:
CONFIG_M=y
CONFIG_A=y
The resulting configuration would have
CONFIG_A=m
which was unexpected.
The problem was not not all choice values were set and thus
kconfig calculated a wrong value.
The fix is to set all choice values when we
read a defconfig files.
conf_set_all_new_symbols() is refactored such that
random choice values are now handled by a dedicated function.
And new choice values are set by set_all_choice_values().
This was not the minimal fix, but the fix that resulted
in the most readable code.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reported-by: Arve Hjønnevåg <arve@android.com>
Tested-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
savedefconfig failed to save choice symbols equal to 'y'
for tristate choices.
This resulted in this value being lost.
In particular is fixes an issue where
make ARCH=avr32 atngw100_defconfig
make ARCH=avr32 savedefconfig
cp defconfig arch/avr32/configs/atngw100_defconfig
make ARCH=avr32 atngw100_defconfig
diff -u .config .config.old
failed to produce an identical .config.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
savedefconfig will save a minimal config to a file
named "defconfig".
The config symbols are saved in the same order as
they appear in the menu structure so it should
be possible to map them to the relevant menus
if desired.
The implementation was tested against several minimal
configs for arm which was created using brute-force.
There was one regression related to default numbers
which had their valid range further limited by another symbol.
Sample:
config FOO
int "foo"
default 4
config BAR
int "bar"
range 0 FOO
If FOO is set to 3 then BAR cannot take a value higher than 3.
But the current implementation will set BAR equal to 4.
This is seldomly used and the final configuration is OK,
and the fix was non-trivial.
So it was documented in the code and left as is.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Add a a few local functions to avoid some code duplication
No functional changes.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Michal Marek