Commit Graph

4555 Commits

Author SHA1 Message Date
Laurent Pinchart 37c5dcc21d fbdev: sh_mobile_lcdc: Create functions to turn the display on/off
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2012-03-12 22:40:43 +01:00
Laurent Pinchart 0a7f17aa3d fbdev: sh_mobile_lcdc: Don't pass struct device around
Pass a pointer to a struct sh_mobile_lcdc_priv instead, which stores a
pointer to the device.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2012-03-12 22:40:42 +01:00
Laurent Pinchart 4774c12aac fbdev: sh_mobile_lcdc: Move pm runtime enable to probe()
The pm_runtime_enable() and pm_runtime_resume() calls don't belong to
sh_mobile_lcdc_setup_clocks(). Move them to the probe function. Remove
the unneeded pm_runtime_resume() call.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2012-03-12 22:40:42 +01:00
Laurent Pinchart 217e9c4353 fbdev: sh_mobile_lcdc: Mark init-only symbols with __devinit(const)
default_720p and sh_mobile_lcdc_check_interface are used at device
initialization time only. Mark them as __devinitconst and __devinit
respectively.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2012-03-12 22:40:41 +01:00
Laurent Pinchart f1f60b5f55 fbdev: sh_mobile_lcdc: Reorder code into sections
Make the driver more readable by reordering code and splitting it into
logical sections. Reorder the headers alphabetically.

No modification to the code have been performed.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2012-03-12 22:40:41 +01:00
Olof Johansson c454f81350 Merge branch 'board' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/boards
* 'board' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP: add minimal support for Nokia RM-696
  ARM: OMAP: enable Bluetooth on the PandaBoard
  ARM: OMAP: pandora: add support for backlight and poweroff
  ARM: OMAP4: board-4430sdp: don't initialize value that is never used
  ARM: OMAP3: cm-t3517: add EMAC support
  ARM: OMAP: move generic EMAC init to separate file
  ARM: OMAP3: RX-51: add explicit mux configuration of tsc2005 control gpios
  ARM: OMAP: Add omap_reserve functionality

  (includes sync-up to 3.3-rc6)
2012-03-10 09:15:30 -08:00
Florian Tobias Schandinat 838ac785d5 viafb: avoid refresh and mode lookup in set_par
As check_var already ensures that the mode is valid there is no need
to do those expensive lookups here again. The only thing that might
change is that the deprecated interface could report slightly
different refresh rates due to rounding errors.

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-03-08 18:41:38 +00:00
Florian Tobias Schandinat 9864ca20c5 viafb: modetable conversion
This patch converts the modetables used in viafb to
- remove the strange thing that sync_end and blanking_end contained
  the length and not the absolute value
- remove hundreds of useless defines
- use fb_videomode and not our own definition so modes defined in
  the subsystem and received via EDID are compatible with ours

As the modes are now stored in a flat structure and no longer in a
tree like thing the lookup time was increased but as it is a rare
event anyway it shouldn't matter. Otherwise the behaviour should be
the same as before.

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-03-08 18:41:35 +00:00
Wang YanQing c2bc0a756b video:uvesafb: notice user when we failed to save hardware state
uvesafb_open may failed to save hardware state when kmalloc failed
in uvesafb_vbe_state_save, we should check this and notice user.

Signed-off-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-03-08 18:13:10 +00:00
Wang YanQing ec0d22e4d5 video:uvesafb: Fix oops that uvesafb try to execute NX-protected page
This patch fixes the oops below

[   81.560602] uvesafb: NVIDIA Corporation, GT216 Board - 0696a290, Chip Rev   , OEM: NVIDIA, VBE v3.0
[   81.609384] uvesafb: protected mode interface info at c000:d350
[   81.609388] uvesafb: pmi: set display start = c00cd3b3, set palette = c00cd40e
[   81.609390] uvesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
[   81.614558] uvesafb: VBIOS/hardware doesn't support DDC transfers
[   81.614562] uvesafb: no monitor limits have been set, default refresh rate will be used
[   81.614994] uvesafb: scrolling: ypan using protected mode interface, yres_virtual=4915
[   81.744147] kernel tried to execute NX-protected page - exploit attempt? (uid: 0)
[   81.744153] BUG: unable to handle kernel paging request at c00cd3b3
[   81.744159] IP: [<c00cd3b3>] 0xc00cd3b2
[   81.744167] *pdpt = 00000000016d6001 *pde = 0000000001c7b067 *pte = 80000000000cd163
[   81.744171] Oops: 0011 [#1] SMP
[   81.744174] Modules linked in: uvesafb(+) cfbcopyarea cfbimgblt cfbfillrect
[   81.744178]
[   81.744181] Pid: 3497, comm: modprobe Not tainted 3.3.0-rc4NX+ #71 Acer            Aspire 4741                    /Aspire 4741
[   81.744185] EIP: 0060:[<c00cd3b3>] EFLAGS: 00010246 CPU: 0
[   81.744187] EIP is at 0xc00cd3b3
[   81.744189] EAX: 00004f07 EBX: 00000000 ECX: 00000000 EDX: 00000000
[   81.744191] ESI: f763f000 EDI: f763f6e8 EBP: f57f3a0c ESP: f57f3a00
[   81.744192]  DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[   81.744195] Process modprobe (pid: 3497, ti=f57f2000 task=f748c600 task.ti=f57f2000)
[   81.744196] Stack:
[   81.744197]  f82512c5 f759341c 00000000 f57f3a30 c124a9bc 00000001 00000001 000001e0
[   81.744202]  f8251280 f763f000 f7593400 00000000 f57f3a40 c12598dd f5c0c000 00000000
[   81.744206]  f57f3b10 c1255efe c125a21a 00000006 f763f09c 00000000 c1c6cb60 f7593400
[   81.744210] Call Trace:
[   81.744215]  [<f82512c5>] ? uvesafb_pan_display+0x45/0x60 [uvesafb]
[   81.744222]  [<c124a9bc>] fb_pan_display+0x10c/0x160
[   81.744226]  [<f8251280>] ? uvesafb_vbe_find_mode+0x180/0x180 [uvesafb]
[   81.744230]  [<c12598dd>] bit_update_start+0x1d/0x50
[   81.744232]  [<c1255efe>] fbcon_switch+0x39e/0x550
[   81.744235]  [<c125a21a>] ? bit_cursor+0x4ea/0x560
[   81.744240]  [<c129b6cb>] redraw_screen+0x12b/0x220
[   81.744245]  [<c128843b>] ? tty_do_resize+0x3b/0xc0
[   81.744247]  [<c129ef42>] vc_do_resize+0x3d2/0x3e0
[   81.744250]  [<c129efb4>] vc_resize+0x14/0x20
[   81.744253]  [<c12586bd>] fbcon_init+0x29d/0x500
[   81.744255]  [<c12984c4>] ? set_inverse_trans_unicode+0xe4/0x110
[   81.744258]  [<c129b378>] visual_init+0xb8/0x150
[   81.744261]  [<c129c16c>] bind_con_driver+0x16c/0x360
[   81.744264]  [<c129b47e>] ? register_con_driver+0x6e/0x190
[   81.744267]  [<c129c3a1>] take_over_console+0x41/0x50
[   81.744269]  [<c1257b7a>] fbcon_takeover+0x6a/0xd0
[   81.744272]  [<c12594b8>] fbcon_event_notify+0x758/0x790
[   81.744277]  [<c10929e2>] notifier_call_chain+0x42/0xb0
[   81.744280]  [<c1092d30>] __blocking_notifier_call_chain+0x60/0x90
[   81.744283]  [<c1092d7a>] blocking_notifier_call_chain+0x1a/0x20
[   81.744285]  [<c124a5a1>] fb_notifier_call_chain+0x11/0x20
[   81.744288]  [<c124b759>] register_framebuffer+0x1d9/0x2b0
[   81.744293]  [<c1061c73>] ? ioremap_wc+0x33/0x40
[   81.744298]  [<f82537c6>] uvesafb_probe+0xaba/0xc40 [uvesafb]
[   81.744302]  [<c12bb81f>] platform_drv_probe+0xf/0x20
[   81.744306]  [<c12ba558>] driver_probe_device+0x68/0x170
[   81.744309]  [<c12ba731>] __device_attach+0x41/0x50
[   81.744313]  [<c12b9088>] bus_for_each_drv+0x48/0x70
[   81.744316]  [<c12ba7f3>] device_attach+0x83/0xa0
[   81.744319]  [<c12ba6f0>] ? __driver_attach+0x90/0x90
[   81.744321]  [<c12b991f>] bus_probe_device+0x6f/0x90
[   81.744324]  [<c12b8a45>] device_add+0x5e5/0x680
[   81.744329]  [<c122a1a3>] ? kvasprintf+0x43/0x60
[   81.744332]  [<c121e6e4>] ? kobject_set_name_vargs+0x64/0x70
[   81.744335]  [<c121e6e4>] ? kobject_set_name_vargs+0x64/0x70
[   81.744339]  [<c12bbe9f>] platform_device_add+0xff/0x1b0
[   81.744343]  [<f8252906>] uvesafb_init+0x50/0x9b [uvesafb]
[   81.744346]  [<c100111f>] do_one_initcall+0x2f/0x170
[   81.744350]  [<f82528b6>] ? uvesafb_is_valid_mode+0x66/0x66 [uvesafb]
[   81.744355]  [<c10c6994>] sys_init_module+0xf4/0x1410
[   81.744359]  [<c1157fc0>] ? vfsmount_lock_local_unlock_cpu+0x30/0x30
[   81.744363]  [<c144cb10>] sysenter_do_call+0x12/0x36
[   81.744365] Code: f5 00 00 00 32 f6 66 8b da 66 d1 e3 66 ba d4 03 8a e3 b0 1c 66 ef b0 1e 66 ef 8a e7 b0 1d 66 ef b0 1f 66 ef e8 fa 00 00 00 61 c3 <60> e8 c8 00 00 00 66 8b f3 66 8b da 66 ba d4 03 b0 0c 8a e5 66
[   81.744388] EIP: [<c00cd3b3>] 0xc00cd3b3 SS:ESP 0068:f57f3a00
[   81.744391] CR2: 00000000c00cd3b3
[   81.744393] ---[ end trace 18b2c87c925b54d6 ]---

Signed-off-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: stable@vger.kernel.org
2012-03-08 18:12:53 +00:00
Olivier Sobrie e71ff6f265 udlfb: Fix invalid return codes in edid sysfs entry store function
Return a negative errno instead of zero in the write function of
the sysfs entry in case of error.
Also add a check on the return value of dlfb_setup_modes().

Signed-off-by: Olivier Sobrie <olivier@sobrie.be>
Acked-by: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-03-08 18:12:22 +00:00
Olof Johansson d60d506e6b Merge branch 'next/cleanup-s3c24xx' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/cleanup
* 'next/cleanup-s3c24xx' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (24 commits)
  ARM: S3C24XX: remove call to s3c24xx_setup_clocks
  ARM: S3C24XX: add get_rate for clk_p on S3C2416/2443
  ARM: S3C24XX: add get_rate for clk_h on S3C2416/2443
  ARM: S3C24XX: remove XXX_setup_clocks method from S3C2443
  ARM: S3C24XX: remove obsolete S3C2416_DMA option
  ARM: S3C24XX: Reuse S3C2443 dma for S3C2416
  ARM: S3C24XX: Fix indentation of dma-s3c2443
  ARM: S3C24XX: Move device setup files to mach directory
  ARM: S3C24XX: Consolidate Simtec extensions
  ARM: S3C24XX: move simtec-specific code to mach directory
  ARM: S3C24XX: Move common-smdk code to mach directory
  ARM: S3C24XX: Move s3c2443-clock.c to mach-s3c24xx
  ARM: s3c2410_defconfig: update s3c2410_defconfig
  ARM: S3C2443: move mach-s3c2443/* into mach-s3c24xx/
  ARM: S3C2440: move mach-s3c2440/* into mach-s3c24xx/
  ARM: S3C2416: move mach-s3c2416/* into mach-s3c24xx/
  ARM: S3C2412: move mach-s3c2412/* into mach-s3c24xx/
  ARM: S3C2410: move mach-s3c2410/* into mach-s3c24xx/
  ARM: S3C24XX: change the ARCH_S3C2410 to ARCH_S3C24XX
  ARM: S3C2410: move s3c2410_baseclk_add to clock.h
  ...
2012-03-08 08:53:14 -08:00
Kukjin Kim 880bcd4a83 Merge branch 'topic/cleanup-s3c24xx' into next/cleanup-s3c24xx
Conflicts:
	arch/arm/mach-s3c24xx/include/mach/system.h
2012-03-07 01:36:33 -08:00
Tony Lindgren 6076c64412 ARM: OMAP: Remove remaining includes for mach/io.h
These are no longer needed with the recent iomap.h
changes.

Reported-by: Rob Herring <robherring2@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-03-06 21:34:38 -06:00
Jett.Zhou 1efc15812d backlight: Modified power control of pm860x backlight
Since several sub modules such as backlight, leds and vibrator depend
on the refernce group and internal oscillator in pm8606, so modified
the power control of backlight in pm8606 by unified interface.

Signed-off-by: Jett.Zhou <jtzhou@marvell.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06 18:46:53 +01:00
Tomi Valkeinen 4614679c9d OMAPDSS: APPLY: print warning if wait_pending_extra_info_updates fails
wait_pending_extra_info_updates() currently does a hacky second check
for extra_info_update_ongoing() at the end of the function to show a
warning if extra_info update is still ongoing. The call to
extra_info_update_ongoing() should really be inside spinlock, but that's
a bit heavy just for verification.

Rather than that, check the return value of the
wait_for_completion_timeout() and print an error if it has timeouted or
returned an error.

Even better would be to return the error value and act on it in the
callers of wait_pending_extra_info_updates. However, it's not clear what
the callers should do in case of an error, as the error should only
happen if there's a bug in the driver or the HW. So we'll just print the
warning for now.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-03-06 14:08:39 +02:00
Lajos Molnar 21e56f79ab OMAPDSS: MANAGER/APPLY: Add runtime_pm protection around wait_for_go/vsync functions
If DSS suspends within the functions dss_mgr_wait_for_go(),
dss_mgr_wait_for_go_ovl() or dss_mgr_wait_for_vsync(). It may lose it's clock
and lead to a register access failure.

Request runtime_pm around these functions.

[archit@ti.com: Moved runtime_pm calls to wait_for_go/vsync functions rather
then calling them from omap_dispc_wait_for_irq_interruptible_timeout()]

Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-03-06 14:08:30 +02:00
Lajos Molnar c0c1cfcb57 OMAPDSS: DISPC: Fix FIR coefficients
coef3_M8 had an incorrect phase with 50% more intensity. This resulted in
banding on slightly down/upscaled images. Fixed a rounding error in coef5_M9.

Also removed ARRAY_LEN macro as ARRAY_SIZE is the standard linux one.

Signed-off-by: Lajos Molnar <lajos@ti.com>
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-03-06 14:08:23 +02:00
Lajos Molnar 08f3267e26 OMAPDSS: DISPC: Fix OMAP4 supported color formats
Add missing but supported color formats for GFX pipeline in dss features:
RGBX16-4444, RGBA16-4444 and XRGB16-1555.

In dispc_ovl_set_color_mode():

- Remove unsupported modes on GFX pipeline: YUV2 and UYVY. Replace these by
  missing modes supported by GFX pipelines: RGBX16-4444 and RGBA16-4444.

- Fix swapped modes on VID pipelines: RGBX16-4444 and XRGB16-4444.

Signed-off-by: Lajos Molnar <lajos@ti.com>
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-03-06 14:08:16 +02:00
Mythri P K dd2116a35a OMAPDSS: HDMI: Add M2 divider while calculating clkout
While calculating regm and regmf value add using M2 divider in
the equation.
Formula for calculating:
Output clock on digital core domain:
	CLKOUT = (M / (N+1))*CLKINP*(1/M2)
Internal oscillator output clock on internal LDO domain:
	CLKDCOLDO = (M / (N+1))*CLKINP
The current code when allows variable M2 values as input
ignores using M2 divider values in calculation of regm and regmf.
so fix it by using M2 in calculation although the default value for
M2 is 1.

Signed-off-by: Mythri P K <mythripk@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-03-06 14:08:10 +02:00
Jingoo Han 5c44778eb0 video: s3c-fb: Add support EXYNOS5 FIMD
This patch adds s3c_fb_driverdata s3c_fb_data_exynos5 for EXYNOS5
and adds extended timing control setting.

EXYNOS5 FIMD needs extended setting for video timing control.
Additional bits are added to VIDTCON2, VIDWxxADD2, VIDOSDxA and
VIDOSDxB registers in order to set timing value for lager resolution.

Also, address offset of VIDTCONx registers is changed from 0x0
to 0x20000, thus variable type should be changed to int type
to handle the address offset of VIDTCONx registers for EXYNOS5 FIMD.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-03-06 11:57:14 +00:00
Vasily Khoruzhick 23f1365677 pxafb: do console locking before calling fb_blank()
Otherwise we hit WARN_CONSOLE_UNLOCKED in do_unblank_screen

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-03-06 11:56:48 +00:00
Tomi Valkeinen 0ba86d7ede Merge commit 'v3.3-rc6'
Merge v3.3-rc6 to get the latest DSS and OMAP arch fixes.

Conflicts:
	arch/arm/mach-omap1/board-innovator.c
	drivers/video/omap2/dss/apply.c
2012-03-06 13:20:31 +02:00
Florian Tobias Schandinat d282e4d935 Merge commit 'v3.3-rc6' into fbdev-next 2012-03-06 08:09:16 +00:00
Florian Tobias Schandinat 2c0fad8e90 Merge pull request #1 from bernieplug/fbdev-next
udlfb patches for fbdev-next
2012-03-05 23:54:54 -08:00
Florian Tobias Schandinat 91dc1be8f6 viafb: LCD bpp cleanup
This patch removes redundant bits per pixel information by using the
one storged in var directly. Simplifies code without any functional
changes.

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-03-04 12:05:15 +00:00
Ben Collins 664c5f1849 udlfb: Add module_param to allow forcing pixel_limit
Some user scenarios need to prioritize performance over
maxiumum resolution.

Also, some devices may have bad vendor descriptors, and
this allows the user to set a pixel limit that matches
their specific device to avoid blank screens on higher
resolution monitors.

700000 minimum for DL-115, 2360000 maximum for DL-195

Signed-off-by: Ben Collins <bcollins@ubuntu.com>
Signed-off-by: Bernie Thompson <bernie@plugable.com>
2012-03-03 12:57:37 -08:00
Ben Collins b49f184b64 udlfb: Make sure to get correct endian keys from vendor descriptor
The driver was not using le16_to_cpu when reading keys from the vendor
descriptor, causing incorrect parsing. Mainly, sku_pixel_limit was not
being parsed on big-endian systems. This would result in a blank screen
on big-endian CPUs where the DL chips's max mode was smaller than the
monitor's native mode.

Signed-off-by: Ben Collins <bcollins@ubuntu.com>
Signed-off-by: Bernie Thompson <bernie@plugable.com>
2012-03-03 12:43:27 -08:00
Linus Torvalds d085a09cf3 fbdev fixes for 3.3
It includes:
 - two fixes for OMAP HDMI
 - one fix to make new OMAP functions behave as they are supposed to
 - one Kconfig dependency fix
 - two fixes for viafb for modesetting on VX900 hardware
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJPUTAuAAoJECSVL5KnPj1PwIoP/3BosrH3mE7hDAXLI6EoXTmo
 SaePt271FV+RqlG5Tjd07IDceXaCz3zf+ZyS9sKZXvGi9QNMKKs52Ah0PeWDfalM
 MJVtRh2FBvaSKFvSqKjN3Fzv+bHpJZwekQBLDaHYHNdtQjWNW8Nnkth6n9xNDwau
 Xp5owI/p9ZECoCcj/D17LF59t8kiynqKdDOmhzZ1bp/c1LgL4waSXnP5/ToQxmcL
 zjUrvR4u3RNDqTxJmScswyDZq4u8qLx4fovhScoPe1OpU2cVXV69UdivzoF4A30c
 t02ZPEE+NM5tFfPMtUNn3zCEN+I893e4ABHoZlDfzS8Ab7JJjnDFduvUzJdSPa8H
 3kMZH7YmQhs1KhbrEcZPeBuxmZaNXpojRYmlbnw7w+kHtcaxVUxhR87TI8kYZIaS
 oqsTXmO+f9T8cMy3WbhUylj+uUpcBQYbIHd4QUhGFvylU24mrrJJQtwsPTFTElE7
 CBKPavbtFMkQepeXRX0Sig/xwVcKA7UUfdvirsD4BjfxZqsOxWeBCQN/scEDcSwo
 KOsLN4Kc4T3On3vNHc2fdq4f+sd2rlGeB9tH/NRtt7UBjGhxK+9lD5YmiavUopyH
 ectsoEMXg9FMQS1GwmQZwQx7r1QXRylBRgrHV/l1XwBU/QfQp3WFqBrVTFZkw4rg
 9U0wHlmQYnnU66rUChUt
 =+UnE
 -----END PGP SIGNATURE-----

Merge tag 'fbdev-fixes-for-3.3-2' of git://github.com/schandinat/linux-2.6

fbdev fixes for 3.3 from Florian Tobias Schandinat

It includes:
 - two fixes for OMAP HDMI
 - one fix to make new OMAP functions behave as they are supposed to
 - one Kconfig dependency fix
 - two fixes for viafb for modesetting on VX900 hardware

* tag 'fbdev-fixes-for-3.3-2' of git://github.com/schandinat/linux-2.6:
  OMAPDSS: APPLY: make ovl_enable/disable synchronous
  OMAPDSS: panel-dvi: Add Kconfig dependency on I2C
  viafb: fix IGA1 modesetting on VX900
  viafb: select HW scaling on VX900 for IGA2
  OMAPDSS: HDMI: hot plug detect fix
  OMAPDSS: HACK: Ensure DSS clock domain gets out of idle when HDMI is enabled
2012-03-02 15:21:15 -08:00
Kukjin Kim b130d5c295 ARM: S3C24XX: change the ARCH_S3C2410 to ARCH_S3C24XX
This patch changes the ARCH name to "ARCH_S3C24XX" for Samsung
S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443,
and S3C2450 SoCs so that we can merge the mach-xxx directories
and plat-s3c24xx dir. to just one mach-s3c24xx for them.

I think this should be sent to upstream via samsung tree because
this touches many samsung stuff.

Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Chris Ball <cjb@laptop.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
[for the gadget part:]
Acked-by: Felipe Balbi <balbi@ti.com>
[for the framebuffer (video) part:]
Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
[For the watchdog-part:]
Acked-by: Wim Van Sebroeck <wim@iguana.be>
Cc: Sangbeom Kim <sbkim73@samsung.com>
Cc: Liam Girdwood <lrg@ti.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-03-03 07:44:51 +09:00
Bernie Thompson 8d21547d3c udlfb: fix hcd_buffer_free panic on unplug/replug
Fix race conditions with unplug/replug behavior, in particular
take care not to hold up USB probe/disconnect for long-running
framebuffer operations and rely on usb to handle teardown.

Fix for kernel panic reported with new F17 multiseat support.

Reported-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Bernie Thompson <bernie@plugable.com>
2012-03-01 17:46:27 -08:00
Martin Decky 9daee73c81 udlfb: Improve debugging printouts with refresh rate
It is not very helpful to print a list of the same resolutions
without the refresh rate.

Signed-off-by: Bernie Thompson <bernie@plugable.com>
2012-03-01 17:45:56 -08:00
Janusz Krzysztofik da564a05b3 ARM: OMAP1: ams-delta: clean up init data section assignments
The main purpose of this patch is to fix several section mismatch
warnings from the board file and a few board specific drivers,
introduced with recent Amstrad Delta patch series, some of them rising
up only when building with CONFIG_MODULES not set.

While being at it, section tagging of all init data found in the board
file have been revised and hopefully corrected and/or optimized.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-03-01 15:20:26 -08:00
Tony Lindgren 4239276214 Merge branch 'omap1' into ams-delta 2012-03-01 15:20:00 -08:00
Florian Tobias Schandinat 0d04c58aa4 Merge branch 'fbdev-for-linus' into fbdev-next 2012-02-29 22:42:55 +00:00
Tomi Valkeinen a3d0e4aeca OMAPDSS: APPLY: make ovl_enable/disable synchronous
ovl->enable/disable are meant to be synchronous so that they can handle
the configuration of fifo sizes. The current kernel doesn't configure
fifo sizes yet, and so the code doesn't need to block to function (from
omapdss driver's perspective).

However, for the users of omapdss a non-blocking ovl->disable is
confusing, because they don't know when the memory area is not used
any more.

Furthermore, when the fifo size configuration is added in the next merge
window, the change from non-blocking to blocking could cause side
effects to the users of omapdss. So by making the functions block
already will keep them behaving in the same manner.

And, while not the main purpose of this patch, this will also remove the
compile warning:

drivers/video/omap2/dss/apply.c:350: warning:
'wait_pending_extra_info_updates' defined but not used

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-02-29 22:42:28 +00:00
Tomi Valkeinen c9043ff9e6 OMAPDSS: panel-dvi: Add Kconfig dependency on I2C
panel-dvi uses i2c, but the Kconfig didn't have dependency on I2C. Add
it.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-02-29 22:42:28 +00:00
Arnd Bergmann a26d3c4fcd Merge branch 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup
* 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: Fix L4_EMU_34XX_BASE error after iomap changes
  ARM: OMAP2+: Limit omap_read/write usage to legacy USB drivers
  ARM: OMAP: Remove plat/io.h by splitting it into mach/io.h and mach/hardware.h
  ARM: OMAP2+: Move most of plat/io.h into local iomap.h
  ARM: OMAP1: Move most of plat/io.h into local iomap.h
  ARM: OMAP1: Move 16xx GPIO system clock to platform init code
  ARM: OMAP: Move omap_init_consistent_dma_size() to local common.h
  ARM: OMAP2+: Move SDRC related functions from io.h into local common.h
  ARM: OMAP2+: Drop DISPC L3 firewall code
  ARM: OMAP2xxx: PM: remove obsolete timer disable code in the suspend path
  ARM: OMAP: McSPI: Remove unused flag from struct omap2_mcspi_device_config

(update to latest rmk/for-arm-soc branch)

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-02-29 21:18:13 +00:00
Tony Lindgren 2c799cef4d ARM: OMAP: Remove plat/io.h by splitting it into mach/io.h and mach/hardware.h
This is needed to minimize io.h so the SoC specific io.h
for ARMs can removed.

Note that minimal driver changes for DSS and RNG are needed to
include cpu.h for SoC detection macros.

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-02-24 10:34:35 -08:00
Tony Lindgren 1ca8c07bda ARM: OMAP2+: Drop DISPC L3 firewall code
This is only needed when using SRAM for framebuffer,
and the support for SRAM framebuffer is about to get
removed.

Otherwise we cannot move most of plat/io.h to be a local
iomap.h for mach-omap2.

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev@vger.kernel.org
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-02-24 10:34:32 -08:00
Linus Torvalds 0e69e08401 SuperH fixes for 3.3-rc5
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.15 (GNU/Linux)
 
 iEYEABECAAYFAk9HE98ACgkQGkmNcg7/o7g4+QCfYIcWunicH7+tLMjH/h5MgHq2
 S5EAoJdIKyAPfV1tsIY0ykJZQP+H4t4X
 =QqTI
 -----END PGP SIGNATURE-----

Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-sh

SuperH fixes for 3.3-rc5

* tag 'sh-for-linus' of git://github.com/pmundt/linux-sh:
  sh: Fix sh2a build error for CONFIG_CACHE_WRITETHROUGH
  sh: modify a resource of sh_eth_giga1_resources in board-sh7757lcr
  arch/sh: remove references to cpu_*_map.
  sh: Fix typo in pci-sh7780.c
  sh: add platform_device for SPI1 in setup-sh7757
  sh: modify resource for SPI0 in setup-sh7757
  sh: se7724: fix compile breakage
  sh: clkfwk: bugfix: use clk_reparent() for div6 clocks
  sh: clock-sh7724: fixup sh_fsi clock settings
  sh: sh7757lcr: update to the new MMCIF DMA configuration
  sh: fix the sh_mmcif_plat_data in board-sh7757lcr
  video: pvr2fb: Fix up spurious section mismatch warnings.
  sh: Defer to asm-generic/device.h.
2012-02-24 08:56:51 -08:00
Russell King 7cb66dcc82 FB: sa11x0: convert to use platform resource and ioremap()
Convert the sa11x0 framebuffer driver to obtain the base address of its
hardware registers from the platform resources, and ioremap this rather
than relying on the static mappings.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-24 09:39:59 +00:00
Jingoo Han 327e27681c video: s3c-fb: use devm_request_irq()
The devm_ functions allocate memory that is released when a driver
detaches. This patch uses devm_request_irq of these functions.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-02-24 00:50:07 +00:00
Julia Lawall 640ba2444f drivers/video/pxa168fb.c: use devm_ functions
The various devm_ functions allocate memory that is released when a driver
detaches.  This patch uses these functions for data that is allocated in
the probe function of a platform device and is only freed in the remove
function.

By using devm_ioremap, it also removes a potential memory leak, because
there was no call to iounmap in the probe function.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-02-24 00:49:59 +00:00
Florian Tobias Schandinat 8aaaaf3cbf Merge branch 'fbdev-for-linus' into fbdev-next 2012-02-24 00:47:05 +00:00
Florian Tobias Schandinat e29206381a viafb: fix IGA1 modesetting on VX900
Even if the documentation calls this bit "Reserved" it has to be set
to 0 for correct modesetting on IGA1.

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: stable@vger.kernel.org
2012-02-24 00:38:14 +00:00
Florian Tobias Schandinat 050f0e02c8 viafb: select HW scaling on VX900 for IGA2
VX900 can do hardware scaling for both IGAs in contrast to previous
hardware which could do it only for IGA2. This patch ensures that
we set the parameter for IGA2 and not for IGA1. This fixes hardware
scaling on VX900 until we have the infrastructure to support it for
both IGAs.

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: stable@vger.kernel.org
2012-02-24 00:38:02 +00:00
Florian Tobias Schandinat 4761c603dd Merge branch 'for-3.3-rc' of git://gitorious.org/linux-omap-dss2/linux into fbdev-for-linus 2012-02-24 00:28:57 +00:00
Rob Clark ca888a7958 OMAPDSS: HDMI: hot plug detect fix
The "OMAPDSS: HDMI: PHY burnout fix" commit switched the HDMI driver
over to using a GPIO for plug detect.  Unfortunately the ->detect()
method was not also updated, causing HDMI to no longer work for the
omapdrm driver (because it would actually check if a connection was
detected before attempting to enable display).

Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-02-23 10:29:08 +02:00
Archit Taneja a247ce78ca OMAPDSS: HACK: Ensure DSS clock domain gets out of idle when HDMI is enabled
For DSS clock domain to transition from idle to active state. It's necessary
to enable the optional clock DSS_FCLK before we enable the module using the
MODULEMODE bits in the clock domain's CM_DSS_DSS_CLKCTRL register.

This sequence was not followed correctly for the 'dss_hdmi' hwmod and it led
to DSS clock domain not getting out of idle when pm_runtime_get_sync() was
called for hdmi's platform device.

Since the clock domain failed to change it's state to active, the hwmod code
disables any clocks it had enabled before for this hwmod. This led to the clock
'dss_48mhz_clk' gettind disabled.

When hdmi's runtime_resume() op is called, the call to dss_runtime_get()
correctly enables the DSS clock domain this time. However, the clock
'dss_48mhz_clk' is needed for HDMI's PHY to function correctly. Since it was
disabled previously, the driver fails when it tries to enable HDMI's PHY.

Fix this for now by ensuring that dss_runtime_get() is called before we call
pm_runtime_get_sync() for hdmi's platform device. A correct fix for later would
be to modify the DSS related hwmod's mainclks, and also some changes in how
opt clocks are handled in the DSS driver.

This fixes the issue of HDMI not working when it's the default display. The
issue is not seen if any other display is already enabled as the first display
would have correctly enabled the DSS clockdomain.

Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-02-23 10:29:08 +02:00
Tomi Valkeinen 973b659cbf Merge branch 'work/old-omapfb-removal' 2012-02-23 09:45:58 +02:00
Tomi Valkeinen ae7e1f2d0b OMAPFB: remove remaining OMAP arch checks
Now that the old omapfb driver is only omap1 display driver, there's no
need to check if the arch is omap1. This patch removes the few remaining
checks for the arch.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
2012-02-23 09:39:35 +02:00
Tomi Valkeinen 8f5e35a794 OMAPFB: Move old omapfb private structs to a private include file
include/linux/omapfb.h contains structs that are used only by the
omapfb driver. Move the structs into drivers/video/omap/omapfb.h.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-02-23 09:39:19 +02:00
Tomi Valkeinen 82d5b3e231 OMAPFB: remove unused fb_format_to_dss_mode()
fb_format_to_dss_mode() function is no longer used, so remove it.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-02-23 09:39:18 +02:00
Tomi Valkeinen 80277566d0 OMAPFB: remove mem info from platform_data
omapfb driver used platform_data to get fb memory areas and formats
defined by the board file.

This patch removes omapfb's (both old and new omapfb) use of the
memory data in platform_data, because:

- No board uses them currently
- It's not board file's job to define things like amount of default
  framebuffer memory. These should come from the bootloader via command
  line parameters.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-02-23 09:39:18 +02:00
Tomi Valkeinen 58e0d6ab02 OMAP: N770: remove HWA742 platform data
In an effort to clean up the old omapfb driver, this patch removes
HWA742 (the display chip used in N770) platform data. This can be done
as N770 is the only user of HWA742, and the platform data contains only
one field, te_connected, which we can just presume to be true in the
HWA742 driver.

This allows us to remove omapfb_set_ctrl_platform_data(), and the
mechanism to pass the platform data, in a later patch.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
2012-02-23 09:39:05 +02:00
Tomi Valkeinen 1896e2f145 OMAPFB: Remove video SRAM support (old omapfb)
OMAP SRAM can be used as video memory on OMAP1 and 2. However, there
usually is very little SRAM available, thus limiting its use, and no
board supported by the kernel currently uses it.

This patch removes the use of SRAM as video ram for the old omapfb
driver to simplify memory handling.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
2012-02-23 09:38:54 +02:00
Tomi Valkeinen 2a803c887b OMAPDSS: Remove video SRAM support
OMAP SRAM can be used as video memory on OMAP1 and 2. However, there
usually is very little SRAM available, thus limiting its use, and no
board supported by the kernel currently uses it.

This patch removes the use of SRAM as video ram for the omapdss driver
to simplify memory handling.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
2012-02-23 09:38:26 +02:00
Tomi Valkeinen 8dc50ec775 OMAPFB: Remove OMAP2/3 support from old omapfb driver
Old omapfb driver (drivers/video/omap/) is no longer used for OMAP2+
devices, and thus we can remove OMAP2+ support from it and make it an
OMAP1 omapfb driver.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-02-22 10:55:29 +02:00
Tomi Valkeinen fdcb68884b OMAPFB: remove old blizzard driver
N8x0's blizzard driver has been ported to new omapdss driver, so we can
now remove the old blizzard driver.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-02-22 10:55:29 +02:00
Russell King 00d94979c3 FB: sa11x0: convert shannon display enable accesses to use GPIO subsystem
Rather than accessing GPSR and GPCR directly, use the GPIO subsystem
instead.

Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-21 11:56:21 +00:00
Russell King 9bb13eed37 FB: sa11x0: fix shannon GPSR/GPCR accesses
The GPIO set and clear registers should only be written, rather than
read, modified, and written.  A read-modify-write will have undesired
side effects.

Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-21 11:56:21 +00:00
Russell King 058502eb38 FB: sa1100: make GPIO configuration setting safe
The sa1100fb driver needs to set the GPIO direction and alternate
function register according to the panel that we're driving.  We've
done this in the driver by read-modify-writing the register, which
may cause problems with races.  Fix this with a minimal change.

Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-21 11:56:21 +00:00
Russell King ba5fd193f4 FB: sa1100: use inf members directly
Now that the LCD information is available while the driver is loaded,
we don't need to cache that information into our driver private data
structure.  Get rid of it.

Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-21 11:56:21 +00:00
Russell King d1a378876c FB: sa1100: remove assabet specific initialization
Remove the assabet specific initialization for PAL output mode -
we call the lcd_power function before we enable the LCD controller,
which will disable the LCD panel to prevent it receiving incorrect
timings.  Therefore, this setup here is redundant.

Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-21 11:56:20 +00:00
Russell King 086ada54ab FB: sa1100: remove global sa1100fb_.*_power function pointers
Now that we have platform data contained within the individual board
code, we can get rid of the global function pointers, placing them
inside the platform data instead.

Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-21 11:56:19 +00:00
Russell King e1b7a72aeb FB: sa1100: move platform data to platform files
Move platform data out of the sa1100fb driver into the various
platform files themselves.

Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-21 11:56:19 +00:00
Russell King 9e6720fb0c FB: sa1100: move machine inf structures to <video/sa1100fb.h>
Move the LCD data structures to an include file which can be shared
with the board code in arch/arm/mach-sa1100.

Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-21 11:56:19 +00:00
Russell King 531060fc19 FB: sa1100: combine RGB bitfield overrides into sa1100fb_mach_info
Allow the sa1100fb_mach_info structure to carry the RGB bitfield
overrides, rather than requiring them to be separately initialized
in sa1100fb_get_machine_info().

Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-21 11:56:19 +00:00
Russell King 7988929668 FB: sa1100: convert printks to dev_xxx()
Use the dev_xxx() macros for driver kernel message output, rather than
open coded printk() with KERN_ levels etc.  Remove DPRINTK().

Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-21 11:56:18 +00:00
Russell King 58f5cbf275 FB: sa1100: constify rgb structures
The rgb structures should only be read and never written.  Constify
them.

Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-21 11:56:18 +00:00
Russell King 4f7e34f8ef FB: sa1100: add .owner initializer to driver structure
Annotate the driver structure with the .owner field, to allow the
module to be associated with the driver.

Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-21 11:56:18 +00:00
Russell King 66564d832f FB: sa1100: avoid section mismatch warnings
WARNING: drivers/video/built-in.o(.devinit.text+0x58): Section mismatch in reference from the function sa1100fb_probe() to the function .init.text:sa1100fb_init_fbinfo()
The function __devinit sa1100fb_probe() references
a function __init sa1100fb_init_fbinfo().
If sa1100fb_init_fbinfo is only used by sa1100fb_probe then
annotate sa1100fb_init_fbinfo with a matching annotation.

WARNING: drivers/video/built-in.o(.devinit.text+0x258): Section mismatch in reference from the function sa1100fb_init_fbinfo() to the (unknown reference) .init.data:(unknown)
The function __devinit sa1100fb_init_fbinfo() references
a (unknown reference) __initdata (unknown).
If (unknown) is only used by sa1100fb_init_fbinfo then
annotate (unknown) with a matching annotation.

WARNING: drivers/video/built-in.o(.devinit.text+0x26c): Section mismatch in reference from the function sa1100fb_init_fbinfo() to the (unknown reference) .init.data:(unknown)
The function __devinit sa1100fb_init_fbinfo() references
a (unknown reference) __initdata (unknown).
If (unknown) is only used by sa1100fb_init_fbinfo then
annotate (unknown) with a matching annotation.

WARNING: drivers/video/built-in.o(.devinit.text+0x270): Section mismatch in reference from the function sa1100fb_init_fbinfo() to the (unknown reference) .init.data:(unknown)
The function __devinit sa1100fb_init_fbinfo() references
a (unknown reference) __initdata (unknown).
If (unknown) is only used by sa1100fb_init_fbinfo then
annotate (unknown) with a matching annotation.

WARNING: drivers/video/built-in.o(.devinit.text+0x278): Section mismatch in reference from the function sa1100fb_init_fbinfo() to the (unknown reference) .init.data:(unknown)
The function __devinit sa1100fb_init_fbinfo() references
a (unknown reference) __initdata (unknown).
If (unknown) is only used by sa1100fb_init_fbinfo then
annotate (unknown) with a matching annotation.

Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-21 11:56:16 +00:00
Florian Tobias Schandinat 70a27df157 viafb: Fix bug in centering code
Obviously this is a typo and although there were no effects observed
it's probably better to fix it.

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-02-21 08:50:27 +00:00
Florian Tobias Schandinat 78145b7a34 viafb: another workaround for OLPCs weird wiring
On OLPC we must not touch this I2C bus or it will hang.

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-02-21 08:50:19 +00:00
Ricardo Neri f15511e23d OMAPDSS: HDMI: Modify logic to configure MCLK
The MCLK mode defines a factor to divide the clock that is used to
generate the Audio Clock Regeneration packets, MCLK.

The divisor is not used when the CTS value is calculated by HW.
When the value is calculated by SW, it depends on the silicon
revision.

Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-02-21 09:40:22 +02:00
Ricardo Neri d8989d96eb OMAPDSS: HDMI: Implement initialization of MCLK
When the MCLK is used to drive the Audio Clock Regeneration packets,
the initialization procedure is to set ACR_CTRL[2] to 0 and then
back again to 1. Also, devices that do not support the MCLK, use
the TMDS clock directly by leaving ACR_CTRL[2] set to 0.

The MLCK clock divisor, mclk_mode, is configured only if MLCK
is used. Such configuration is no longer related to the CTS mode
as in some silicon revisions CTS SW-mode is used along with the MCLK.

Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-02-21 09:40:15 +02:00
Ricardo Neri 709881942d OMAPDSS: Add DSS feature for HDMI MCLK for audio
Certain OMAP4 revisions (i.e., 4430 ES2.3, 4460, and 4470) use
a pseudo clock (generated from the TMDS clock), MCLK, to drive the
generation of Audio Clock Regeneration packets. Other devices
(i.e., 4430 ES2.[0,2]) use the TMDS clock directly.

This patch adds a new DSS feature for MCLK support. It also rearranges
the omap_dss_features structures to reflect the devices supporting it.

Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-02-21 09:40:11 +02:00
Grazvydas Ignotas 4306b721ac OMAPDSS: TPO-TD03MTEA1: update default gamma
Over time better gamma has been determined and tuned with some
equipment so update the defaults. From subjective point of view
dark shades should be better visible.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-02-21 09:40:04 +02:00
Grazvydas Ignotas 8df4f5ce64 OMAPDSS: TPO-TD03MTEA1: fix suspend hang
During system suspend, at the time DSS is being suspended, SPI is
already suspended and it's clocks are cut. Because of this trying to
communicate with the LCD controller results in a deadlock.

To fix this, split out LCD programming parts of display enable/disable
functions and perform them from SPI PM callbacks instead when system is
being suspended. If the display is just being enabled/disabled, do it
from DSS callbacks as before.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-02-21 09:40:00 +02:00
Mythri P K da8f14fc3b OMAPDSS: HDMI: Move Avi-infoframe struct to hdmi_ip_data
With AVI infoframe various parameters of video stream such as
aspect ratio, quantization range, videocode etc will be indicated
from source to sink.Thus AVI information needs to be set/accessed
by the middle ware based on the video content.
Thus this parameter is now moved to the ip_data structure.

Signed-off-by: Mythri P K <mythripk@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-02-21 09:39:53 +02:00
Yegor Yefremov 992ee64af6 OMAPDSS: add Innolux AT080TN52 display support
This patch adds support for Innolux AT080TN52 800x600 panel.
Tested with AM3517 based board.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-02-21 09:39:50 +02:00
Archit Taneja 79ee89cdbd OMAPDSS: DISPC: Fix scaling constraints for OMAP4
The calculation of required DISPC_FCLK for downscaling is done by multplying the
pixel clock with an integer factor. This isn't true for OMAP4 where the required
clock is calculated using the exact ratio of downscaling done.

Fix this calculation for OMAP4. Also, do a minor clean up of calc_fclk().

Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-02-21 09:39:30 +02:00
Archit Taneja c124f23dfd OMAPDSS: Features: Maintain dss_feats as a list
The number of dss_feat_id members has increased to a large value, the current
way of assigning a subset of these features (for a particular OMAP) as a mask
is no longer feasible.

Maintain the subset of features supported as lists. Make the function
dss_has_feature() traverse through this list.

Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-02-21 09:39:20 +02:00
Tomi Valkeinen cd3b34493f OMAPDSS: cleanup probe functions
Now that dss is using devm_ functions for allocation in probe functions,
small reordering of the allocations allows us to clean up the probe
functions more.

This patch moves "unmanaged" allocations after the managed ones, and
uses plain returns instead of gotos where possible. This lets us remove
a bunch of goto labels, simplifying the probe's error handling.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-02-21 09:39:12 +02:00
Tomi Valkeinen 3f60db4bde Merge commit 'v3.3-rc4' 2012-02-21 09:32:19 +02:00
Florian Tobias Schandinat 94f61a7666 i740fb: fix compile error when CONFIG_MTRR is not selected
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-02-19 19:11:51 +00:00
Dan Carpenter c572c8bbff viafb: NULL dereference on allocation failure in query_edid()
We should handle the allocation here, if only to keep the static
checkers happy.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-02-17 07:56:21 +00:00
Ondrej Zary 5350c65f4f Resurrect Intel740 driver: i740fb
This is a resurrection of an old (like 2.4.19) out-of-tree driver for
Intel740 graphics cards and adaptation for recent kernels. The old driver by
Andrey Ulanov is located at: http://sourceforge.net/projects/i740fbdev/files/

This is a new driver based on skeletonfb, using most of the low level HW code
from the old driver. The DDC code is completely new.

The driver was tested on two 8MB cards: Protac AG240D and Diamond Stealth II
G460.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-02-15 04:31:21 +00:00
Florian Tobias Schandinat 7b91812048 Merge branch 'viafb-aux' into viafb-next 2012-02-15 04:22:47 +00:00
Florian Tobias Schandinat 5dc5f61813 viafb: add initial EDID support
This patch adds support for using EDID data on CRT and DVP1 for
initial configuration if viafb_mode or viafb_mode1 are not present.

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-02-13 07:28:14 +00:00
Jingoo Han e9474be4eb video: support DP controller driver
Samsung EXYNOS SoC such Exynos5 has DP controller and embedded DP
panel can be used. This patch supports DP driver based on Samsung
EXYNOS SoC chip.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-02-13 03:02:30 +00:00
Donghwa Lee 9befe40f6e video: backlight: support s6e8ax0 panel driver based on MIPI DSI
An moled panel driver based MIPI DSI interface.  S6E8AX0 means it may
includes many other ldi controllers, for example, S6E8AA0, S6E8AB0, and so
on.

This patch can be modified depending on each panel properites.  For
example, second parameter of panel condition register can be changed
depending on ldi controller or amoled type.

[akpm@linux-foundation.org: fix Kconfig syntax error]
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Donghwa Lee <dh09.lee@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Jingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-02-13 03:02:03 +00:00
Donghwa Lee 7258cc14f3 video: support MIPI-DSI controller driver
Samsung S5PC210 and EXYNOS SoC platform has MIPI-DSI controller and
MIPI-DSI based LCD Panel could be used with it.  This patch supports
MIPI-DSI driver based Samsung SoC chip.

LCD panel driver based MIPI-DSI should be registered to MIPI-DSI driver at
machine code and LCD panel driver specific function registered to
mipi_dsim_ddi structure at lcd panel init function called system init.  In
the MIPI-DSI driver, find lcd panel driver by using registered lcd panel
name, and then initialize lcd panel driver.

Signed-off-by: Donghwa Lee <dh09.lee@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-02-13 03:02:03 +00:00
Manjunathappa, Prakash 12fa835024 video:da8xx-fb: calculate pixel clock period for the panel
Patch calculates pixel clock period in pico seconds and updates
the same in variable screen information structure. fbset utility
uses this information.

Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-02-13 03:01:47 +00:00
Manjunathappa, Prakash 3a84409ce3 video: da8xx-fb: Fix build warning on unused label
Patch fixes build warning on label "err_cpu_freq" when CONFIG_CPU_FREQ
is not defined.

Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-02-13 03:00:25 +00:00
Danny Kukawka c718a54649 riva/fbdev: fix several -Wuninitialized
Fix several -Wuninitialized compiler warnings by changing the
order of getting modedb in riva_update_default_var() to set
first the fallback and then the prefered timing.

Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-02-13 02:59:14 +00:00
Florian Tobias Schandinat 2c4c8a8a73 viafb: fix I2C emulation on GPIO ports
This patch fixes the I2C emulation on GPIO ports by enabling it
(software controlled) and disabling the output on a GPIO line before
reading it.

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-02-12 22:15:16 +00:00
Florian Tobias Schandinat 4e5527c9d1 viafb: make SAMM to also work on LCD
This patch enables LCD to handle SAMM without dual fb.

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-02-12 22:12:45 +00:00
Florian Tobias Schandinat 532f9169db viafb: make single framebuffer multiple adapter mode work
This patch implementes this mode (viafb_SAMM_ON set and
viafb_dual_fb not set) in a useful way for CRT and DVI devices.
The same content is shown on both devices in different video modes.
The first (primary) resolution must not be bigger than the secondary
one and determines the visible region. The same content is shown
centered on the secondary output.

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-02-10 19:28:39 +00:00
Florian Tobias Schandinat 561c9079ea viafb: fill xres and yres
This patch fills xres and yres in var which is required when a
temporary var is genereated when viafb_SAMM_ON is set and
viafb_dual_fb is not set. It also removes an obsolete comment.

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-02-10 19:28:39 +00:00
Florian Tobias Schandinat e0e12a9282 viafb: set correct polarity for second adapter
This patch sets the correct polarity for the second adapter when
viafb_SAMM_ON is set and viafb_dual_fb is not set. Just one step to
make this mode useful.

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-02-10 19:28:37 +00:00
Florian Tobias Schandinat e75892715d viafb: add auxiliary device management infrastructure
This patch adds the basic infrastructure and a few stub drivers for
devices that are connected via I2C busses. The infrastructure will
be used to replace and extend the support that is scattered
throughout viafb. The stub drivers are not very useful yet but they
show how the infrastructure works, provide information about the
chips integrated into a system and maybe gather some testers as it
would be very difficult for a single person to get a sane test
environment.
The only thing this actually does is probing the I2C busses which
will hopefully not cause any regressions.

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-02-10 19:11:51 +00:00
Russell King 4041071571 ARM: omap: fix oops in drivers/video/omap2/dss/dpi.c
When a PMIC is not found, this driver is unable to obtain its
'vdds_dsi_reg' regulator.  Even through its initialization function
fails, other code still calls its enable function, which fails to
check whether it has this regulator before asking for it to be enabled.

This fixes the oops, however a better fix would be to sort out the
upper layers to prevent them calling into a module which failed to
initialize.

Unable to handle kernel NULL pointer dereference at virtual address 00000038
pgd = c0004000
[00000038] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT
Modules linked in:
CPU: 0    Not tainted  (3.3.0-rc2+ #228)
PC is at regulator_enable+0x10/0x70
LR is at omapdss_dpi_display_enable+0x54/0x15c
pc : [<c01b9a08>]    lr : [<c01af994>]    psr: 60000013
sp : c181fd90  ip : c181fdb0  fp : c181fdac
r10: c042eff0  r9 : 00000060  r8 : c044a164
r7 : c042c0e4  r6 : c042bd60  r5 : 00000000  r4 : c042bd60
r3 : c084de48  r2 : c181e000  r1 : c042bd60  r0 : 00000000
Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
Control: 10c5387d  Table: 80004019  DAC: 00000015
Process swapper (pid: 1, stack limit = 0xc181e2e8)
Stack: (0xc181fd90 to 0xc1820000)
fd80:                                     c001754c c042bd60 00000000 c042bd60
fda0: c181fdcc c181fdb0 c01af994 c01b9a04 c0016104 c042bd60 c042bd60 c044a338
fdc0: c181fdec c181fdd0 c01b5ed0 c01af94c c042bd60 c042bd60 c1aa8000 c1aa8a0c
fde0: c181fe04 c181fdf0 c01b5f54 c01b5ea8 c02fc18c c042bd60 c181fe3c c181fe08
fe00: c01b2a18 c01b5f48 c01aed14 c02fc160 c01df8ec 00000002 c042bd60 00000003
fe20: c042bd60 c1aa8000 c1aa8a0c c042eff8 c181fe84 c181fe40 c01b3874 c01b29fc
fe40: c042eff8 00000000 c042f000 c0449db8 c044ed78 00000000 c181fe74 c042eff8
fe60: c042eff8 c0449db8 c0449db8 c044ed78 00000000 00000000 c181fe94 c181fe88
fe80: c01e452c c01b35e8 c181feb4 c181fe98 c01e2fdc c01e4518 c042eff8 c0449db8
fea0: c0449db8 c181fef0 c181fecc c181feb8 c01e3104 c01e2f48 c042eff8 c042f02c
fec0: c181feec c181fed0 c01e3190 c01e30c0 c01e311c 00000000 c01e311c c0449db8
fee0: c181ff14 c181fef0 c01e1998 c01e3128 c18330a8 c1892290 c04165e8 c0449db8
ff00: c0449db8 c1ab60c0 c181ff24 c181ff18 c01e2e28 c01e194c c181ff54 c181ff28
ff20: c01e2218 c01e2e14 c039afed c181ff38 c04165e8 c041660c c0449db8 00000013
ff40: 00000000 c03ffdb8 c181ff7c c181ff58 c01e384c c01e217c c181ff7c c04165e8
ff60: c041660c c003a37c 00000013 00000000 c181ff8c c181ff80 c01e488c c01e3790
ff80: c181ff9c c181ff90 c03ffdcc c01e484c c181ffdc c181ffa0 c0008798 c03ffdc4
ffa0: c181ffc4 c181ffb0 c0056440 c0187810 c003a37c c04165e8 c041660c c003a37c
ffc0: 00000013 00000000 00000000 00000000 c181fff4 c181ffe0 c03ea284 c0008708
ffe0: 00000000 c03ea208 00000000 c181fff8 c003a37c c03ea214 1073cec0 01f7ee08
Backtrace:
[<c01b99f8>] (regulator_enable+0x0/0x70) from [<c01af994>] (omapdss_dpi_display_enable+0x54/0x15c)
 r6:c042bd60 r5:00000000 r4:c042bd60
[<c01af940>] (omapdss_dpi_display_enable+0x0/0x15c) from [<c01b5ed0>] (generic_dpi_panel_power_on+0x34/0x78)
 r6:c044a338 r5:c042bd60 r4:c042bd60
[<c01b5e9c>] (generic_dpi_panel_power_on+0x0/0x78) from [<c01b5f54>] (generic_dpi_panel_enable+0x18/0x28)
 r7:c1aa8a0c r6:c1aa8000 r5:c042bd60 r4:c042bd60
[<c01b5f3c>] (generic_dpi_panel_enable+0x0/0x28) from [<c01b2a18>] (omapfb_init_display+0x28/0x150)
 r4:c042bd60
[<c01b29f0>] (omapfb_init_display+0x0/0x150) from [<c01b3874>] (omapfb_probe+0x298/0x318)
 r8:c042eff8 r7:c1aa8a0c r6:c1aa8000 r5:c042bd60 r4:00000003
[<c01b35dc>] (omapfb_probe+0x0/0x318) from [<c01e452c>] (platform_drv_probe+0x20/0x24)
[<c01e450c>] (platform_drv_probe+0x0/0x24) from [<c01e2fdc>] (really_probe+0xa0/0x178)
[<c01e2f3c>] (really_probe+0x0/0x178) from [<c01e3104>] (driver_probe_device+0x50/0x68)
 r7:c181fef0 r6:c0449db8 r5:c0449db8 r4:c042eff8
[<c01e30b4>] (driver_probe_device+0x0/0x68) from [<c01e3190>] (__driver_attach+0x74/0x98)
 r5:c042f02c r4:c042eff8
[<c01e311c>] (__driver_attach+0x0/0x98) from [<c01e1998>] (bus_for_each_dev+0x58/0x98)
 r6:c0449db8 r5:c01e311c r4:00000000
[<c01e1940>] (bus_for_each_dev+0x0/0x98) from [<c01e2e28>] (driver_attach+0x20/0x28)
 r7:c1ab60c0 r6:c0449db8 r5:c0449db8 r4:c04165e8
[<c01e2e08>] (driver_attach+0x0/0x28) from [<c01e2218>] (bus_add_driver+0xa8/0x22c)
[<c01e2170>] (bus_add_driver+0x0/0x22c) from [<c01e384c>] (driver_register+0xc8/0x154)
[<c01e3784>] (driver_register+0x0/0x154) from [<c01e488c>] (platform_driver_register+0x4c/0x60)
 r8:00000000 r7:00000013 r6:c003a37c r5:c041660c r4:c04165e8
[<c01e4840>] (platform_driver_register+0x0/0x60) from [<c03ffdcc>] (omapfb_init+0x14/0x34)
[<c03ffdb8>] (omapfb_init+0x0/0x34) from [<c0008798>] (do_one_initcall+0x9c/0x164)
[<c00086fc>] (do_one_initcall+0x0/0x164) from [<c03ea284>] (kernel_init+0x7c/0x120)
[<c03ea208>] (kernel_init+0x0/0x120) from [<c003a37c>] (do_exit+0x0/0x2d8)
 r5:c03ea208 r4:00000000
Code: e1a0c00d e92dd870 e24cb004 e24dd004 (e5906038)
---[ end trace 9e2474c2e193b223 ]---

Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-09 17:56:53 +00:00
Linus Torvalds 98e9685248 fbdev fixes for 3.3
It includes:
 - a compile fix for fsl-diu-fb
 
 - a fix for a suspend/resume issue in atmel_lcdfb
 
 - a fix for a suspend/resume issue in OMAP
 
 - a workaround for a hardware bug to avoid physical damage in OMAP
 
 - a really trivial dead code removal in intelfb
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJPMG54AAoJECSVL5KnPj1PR6QQAKOoD4luFRw2F85jdk4GYBiX
 WqUWc1OlKYxCGIhk6LpV6fwBLDZCTjOw9NU/9i3JIOHAscGzqVvUce1zYwolEu0B
 tTH15/6Bh6uuRJEKYF8H53t1vsbrutssvUsqVcJsHrfie6bVjqjGV18cLT9siVy5
 jEZnU958Nb7t8hk7Af1ppQkbB4cpExHX4k3hXTKM+dOkRWMaH1fHv2dnikKuYXDq
 G7PC57VqN89DP14M+isUGt5uUgaMSmI09VdTYZ8xgULaZwOxnfOQNnceb/AaKnTY
 I2oHDNlNwmiHVgafN7uS0tAhIqnlYOAVLJNLlDfL7xC71AyH6WtzwJuhXnqun7v6
 moSwzzGKHohCXyeTjMAthx6HyLq55fBPAI1CmEEtmFLMv1tADLAp9Rm4dsaAjyF8
 7aKJO/9iGEpolLYjAGJGGjgCALa+/NWdXnW/zP/2vmcjAaPOZtd0YlD3OaPYr31p
 0cImhG57xIAfh60BRq+/FDthEN478Xj8f2jRe/2nsonw8JuFodZZ6nUaFeQS25X/
 X/07Wkvmz2CY8FoPeXDHaKO8B1wJphzvY2iJjDwI1jg8u/PT2agILNM24tH3SVky
 s6nyBLOEBHZh7mVwll2YifjZ6zzJm4y09LzgZpqXmUXOYPDn5JP9yZE4+R23RaEY
 kVz8fkE/FjmjAlx/WjKa
 =2uP4
 -----END PGP SIGNATURE-----

Merge tag 'fbdev-fixes-for-3.3-1' of git://github.com/schandinat/linux-2.6

fbdev fixes for 3.3

It includes:
 - compile fix for fsl-diu-fb
 - fix for a suspend/resume issue in atmel_lcdfb
 - fix for a suspend/resume issue in OMAP
 - workaround for a hardware bug to avoid physical damage in OMAP
 - really trivial dead code removal in intelfb

* tag 'fbdev-fixes-for-3.3-1' of git://github.com/schandinat/linux-2.6:
  atmel_lcdfb: fix usage of CONTRAST_CTR in suspend/resume
  intelfb: remove some dead code
  drivers/video: compile fixes for fsl-diu-fb.c
  OMAPDSS: HDMI: PHY burnout fix
  OMAP: 4430SDP/Panda: add HDMI HPD gpio
  OMAP: 4430SDP/Panda: setup HDMI GPIO muxes
  OMAPDSS: remove wrong HDMI HPD muxing
  OMAP: 4430SDP/Panda: rename HPD GPIO to CT_CP_HPD
  OMAP: 4430SDP/Panda: use gpio_free_array to free HDMI gpios
  OMAPDSS: use sync versions of pm_runtime_put
2012-02-07 15:54:02 -08:00
Axel Lin c6d242aa64 video: convert drivers/video/* to use module_spi_driver()
This patch converts the drivers in drivers/video/* to use the
module_spi_driver() macro which makes the code smaller and a bit simpler.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Imre Deak <imre.deak@nokia.com>
Cc: Roger Quadros <roger.quadros@nokia.com>
Cc: Steve Sakoman <steve@sakoman.com>
Cc: Erik Gilling <konkers@android.com>
Cc: Gražvydas Ignotas <notasas@gmail.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-01-28 20:59:38 +00:00
Jingoo Han d8b97db4c8 video: s3c-fb: add video clock running at data under-flow
This patch adds video clock running at data under-flow.
It means that the pixel clock is continuously provided
to lcd module, even when under-run occurs.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-01-28 20:58:11 +00:00
Jingoo Han f7f31e505a video: s3c-fb: add alpha value width setting
This patch adds alpha value width setting according to
transparency value of each window format, using BLENDCON
register. When alpha value is 8 bits, BLENDCON will set
alpha value width as 8 bits.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-01-28 20:58:09 +00:00
Jingoo Han 05e52b4bfb video: s3c-fb: fix checkpatch error
This patch fixes the checkpatch error listed below:

ERROR: trailing statements should be on next line

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-01-28 20:50:40 +00:00
Jingoo Han f8bd493456 video: use gpio_request_one
Using gpio_request_one can make the code simpler because it can
set the direction and initial value in one shot.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Michael Hennerich <michael.hennerich@analog.com>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-01-28 20:50:11 +00:00
Julia Lawall 1c16697bf9 drivers/video/au*fb.c: use devm_ functions
The various devm_ functions allocate memory that is released when a driver
detaches.  This patch uses these functions for data that is allocated in
the probe function of a platform device and is only freed in the remove
function.

In au1100fb.c, the probe function now returns -ENODEV on failure.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Manuel Lauss <manuel.lauss@googlemail.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-01-28 20:47:52 +00:00
Kay Sievers 92a9c19a89 udlfb: remove sysfs framebuffer device with USB .disconnect()
The USB graphics card driver delays the unregistering of the framebuffer
device to a workqueue, which breaks the userspace visible remove uevent
sequence. Recent userspace tools started to support USB graphics card
hotplug out-of-the-box and rely on proper events sent by the kernel.

The framebuffer device is a direct child of the USB interface which is
removed immediately after the USB .disconnect() callback. But the fb device
in /sys stays around until its final cleanup, at a time where all the parent
devices have been removed already.

To work around that, we remove the sysfs fb device directly in the USB
.disconnect() callback and leave only the cleanup of the internal fb
data to the delayed work.

Before:
 add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2 (usb)
 add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0 (usb)
 add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/graphics/fb0 (graphics)
 remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0 (usb)
 remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2 (usb)
 remove   /2-1.2:1.0/graphics/fb0 (graphics)

After:
 add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2 (usb)
 add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0 (usb)
 add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/graphics/fb1 (graphics)
 remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/graphics/fb1 (graphics)
 remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0 (usb)
 remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2 (usb)

Cc: stable@vger.kernel.org
Tested-by: Bernie Thompson <bernie@plugable.com>
Acked-by: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-01-28 19:57:46 +00:00
Mark Brown 857a8df946 video: s3c-fb: Convert to devm style allocation
Saves some code, especially useful as the code saved is mostly in the
infrequently tested error paths.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-01-28 19:56:27 +00:00
Manjunathappa, Prakash f820917aba video: da8xx-fb: reset LCDC only if functional clock changes with DVFS
LCDC functional clock may or may not be derived from CPU/MPU DPLL,
For example,
AM335x => Separate independent DPLL for LCDC
Davinci => Same DPLL as MPU

So, on platforms where LCDC functional clock is not derived from CPU/MPU
PLL it is not required to reset LCDC module as its functional clock does
not change with DVFS.

This patch adds check to do reset only if functional clock changes
between pre and post notifier callbacks with DVFS.

Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-01-28 19:55:34 +00:00
Peter Korsgaard 787f9fd232 atmel_lcdfb: support 16bit BGR:565 mode, remove unsupported 15bit modes
Allow framebuffer to be configured in 16bit mode when panel is wired in
(the default) BGR configuration, and don't claim to support 15bit input
modes, which the LCD controller cannot handle.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-01-28 19:54:10 +00:00
Florian Tobias Schandinat b20f86625d Merge commit 'v3.3-rc1' into fbdev-next 2012-01-28 19:52:40 +00:00
Hubert Feurstein 9f1065032c atmel_lcdfb: fix usage of CONTRAST_CTR in suspend/resume
An error was existing in the saving of CONTRAST_CTR register
across suspend/resume.

Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-01-28 19:50:22 +00:00
Dan Carpenter 7bc1dc7174 intelfb: remove some dead code
The goto on the line before means the return is unreachable.  The goto
also returns -ENODEV so no changes are needed there.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-01-28 19:39:17 +00:00
Florian Tobias Schandinat 64a9de8f07 Merge branch 'for-3.3-rc' of git://gitorious.org/linux-omap-dss2/linux into fbdev-for-linus 2012-01-28 19:37:39 +00:00
Michael Neuling f7f5ef0afd drivers/video: compile fixes for fsl-diu-fb.c
Fix a compiler errors introduced in:
  commit ddd3d90543
  Author: Timur Tabi <timur@freescale.com>
  drivers/video: fsl-diu-fb: merge all allocated data into one block

Signed-off-by: Michael Neuling <mikey@neuling.org>
Acked-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-01-28 19:35:24 +00:00
Paul Mundt c40e0fa51c Merge branches 'sh/urgent' and 'sh/platform-updates' into sh-latest 2012-01-27 16:37:30 +09:00
Linus Torvalds 0dbfe8ddaa Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Fix assembler constraint to prevent overeager gcc optimisation
  mac_esp: rename irq
  mac_scsi: dont enable mac_scsi irq before requesting it
  macfb: fix black and white modes
  m68k/irq: Remove obsolete IRQ_FLG_* definitions

Fix up trivial conflict in arch/m68k/kernel/process_mm.c as per Geert.
2012-01-26 12:43:57 -08:00
Tomi Valkeinen c49d005b6c OMAPDSS: HDMI: PHY burnout fix
A hardware bug in the OMAP4 HDMI PHY causes physical damage to the board
if the HDMI PHY is kept powered on when the cable is not connected.

This patch solves the problem by adding hot-plug-detection into the HDMI
IP driver. This is not a real HPD support in the sense that nobody else
than the IP driver gets to know about the HPD events, but is only meant
to fix the HW bug.

The strategy is simple: If the display device is turned off by the user,
the PHY power is set to OFF. When the display device is turned on by the
user, the PHY power is set either to LDOON or TXON, depending on whether
the HDMI cable is connected.

The reason to avoid PHY OFF when the display device is on, but the cable
is disconnected, is that when the PHY is turned OFF, the HDMI IP is not
"ticking" and thus the DISPC does not receive pixel clock from the HDMI
IP. This would, for example, prevent any VSYNCs from happening, and
would thus affect the users of omapdss. By using LDOON when the cable is
disconnected we'll avoid the HW bug, but keep the HDMI working as usual
from the user's point of view.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-01-26 13:51:36 +02:00
Tomi Valkeinen 0eaf9f52e9 OMAPDSS: use sync versions of pm_runtime_put
omapdss doesn't work properly on system suspend. The problem seems to be
the fact that omapdss uses pm_runtime_put() functions when turning off
the hardware, and when system suspend is in process only sync versions
are allowed.

Using non-sync versions normally and sync versions when suspending would
need rather ugly hacks to convey the information of
suspending/not-suspending to different functions. Optimally the driver
wouldn't even need to care about this, and the PM layer would handle
syncing when suspend is in process.

This patch changes all omapdss's pm_runtime_put calls to
pm_runtime_put_sync. This fixes the suspend problem, and probably the
performance penalty of always using sync versions is negligible.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Kevin Hilman <khilman@ti.com>
2012-01-26 13:46:24 +02:00
Tomi Valkeinen 5e36097889 Merge branch 'work/fifomerge' 2012-01-25 13:50:34 +02:00
Julia Lawall 6e2a14d2c5 OMAPDSS: use devm_ functions
The various devm_ functions allocate memory that is released when a driver
detaches.  This patch uses these functions for data that is allocated in
the probe function of a platform device and is only freed in the remove
function.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-01-25 13:48:35 +02:00
Danny Kukawka cc1d3e032d OMAPDSS: VENC: fix NULL pointer dereference in DSS2 VENC sysfs debug attr on OMAP4
Commit ba02fa37de disabled the
venc driver registration on OMAP4. Since the driver never gets
probed/initialised your get a dereferenceed NULL pointer if you
try to get info from /sys/kernel/debug/omapdss/venc

Return info message about disabled venc if venc_dump_regs() gets called.

Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-01-25 13:48:34 +02:00
Ricardo Neri 1149c74419 OMAPDSS: HDMI: Correct source of the pixel clock in ACR calculation
Due to changes in struct hdmi_config, the pixel clock has to be obtained
differently.

The pixel clock is needed to calculate the CTS value as defined in the
HDMI specification.

Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-01-25 13:48:34 +02:00
Mythri P K 9e4ed603e6 OMAPDSS: HDMI: remove duplicate code and mode parameter
code and mode parameters are already a part of the ip_data structure
so no need to keep the same parameters again in hdmi global structure.

Signed-off-by: Mythri P K <mythripk@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-01-25 13:48:34 +02:00
Mythri P K 46095b2d96 OMAPDSS: HDMI: change the timing match logic
Change the timing match logic, Instead of the statically mapped method
to get the corresponding timings for a given code and mode, move to a
simpler array indexed method. It  will help to scale up to add more
timings when needed.

Signed-off-by: Mythri P K <mythripk@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-01-25 13:48:33 +02:00
Mythri P K a05ce78f30 OMAPDSS: HDMI: update static timing table
Add the vsync polarity, hsync polarity, interlace to hdmi_video_timings.
Remove the now duplicate structure hdmi_timings.
update the static table structure in HDMI with CEA/VESA code and mode.

Signed-off-by: Mythri P K <mythripk@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-01-25 13:48:33 +02:00
Mythri P K aeec1a6ccb OMAPDSS: HDMI: remove duplicate video interface code
video interface structure is a duplicate structure with parameters which are
already present in ip_data config structure, Thus removing the structure and
modifying corresponding code.

Signed-off-by: Mythri P K <mythripk@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-01-25 13:48:32 +02:00
Tomi Valkeinen e0e405b925 OMAPDSS: DISPC: Add naive threshold calc for fifomerge
Take fifo merge into use by implementing a rather naive fifo merge
threshold calculation: keep the low threshold always the same, but
increase the high threshold when fifo merge is used.

This should greatly increase the time between pixel data fetches from
SDRAM, as the usable fifo size is much larger. However, it probably
won't help for fifo underflows, as the low threshols is kept the same.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-01-25 13:46:20 +02:00
Tomi Valkeinen 83fa2f2e94 OMAPDSS: DISPC: move fifo threhold calc to dispc.c
Move fifo threshold calculation into dispc.c, as the thresholds are
really dispc internal thing.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-01-25 13:46:19 +02:00
Tomi Valkeinen 3cb5d966e2 OMAPDSS: DISPC: print fifo threshold values in bytes
Fifo thresholds are calculated using bytes, but the debug print prints
values in buffer units. Change the prints to use bytes to be in line
with the calculations, and also to print in the same units on all OMAPs.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-01-25 13:46:19 +02:00
Tomi Valkeinen 1d71f42b35 OMAPDSS: APPLY: add fifo-merge support
Add fifo-merge support. This is done mainly in four functions:
mgr_enable/disable and ovl_enable/disable. These are the functions where
overlays are taken into and out of active use.

The process to enable and disable fifo-merge is not simple. We need to
do it in steps, waiting in between for certain settings to be taken into
use, and continuing after that. The reason for this is that fifo-merge
is a common thing for all managers/overlays, and its use must be
synchronized.

As an example, when we disable an overlay, we first set the overlay as
disabled, then wait until the overlay is actually disabled in the HW,
and only after that we may re-configure the fifos, possibly taking
fifo-merge into use.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-01-25 13:46:18 +02:00
Tomi Valkeinen fb01197422 OMAPDSS: APPLY: add fifo merge support funcs
Add mechanism to set/unset the DISPC fifo-merge:

Add new fields to dss_data, fifo_merge and fifo_merge_dirty. These are
similar to the other info/dirty flags in ovl_priv_data and ovl_mgr_data,
but fifo merge is a common attribute to all managers and thus outside
the ovl_mgr_data.

The fifo-merge field is used in the dss_write_regs_common, which handles
writing the register.

dss_apply_fifo_merge() can be used to set/unset the fifo merge field in
the dss_data.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-01-25 13:46:18 +02:00
Tomi Valkeinen e6b0f88452 OMAPDSS: FEAT: Add FIFO_MERGE feature
Add feature flag for fifo merge. OMAP2 doesn't contain fifo merge, later
OMAPs do.

dispc_enable_fifomerge() checks for the flag when called, and gives a
WARN if fifo merge is being enabled when it is not supported.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-01-25 13:46:17 +02:00
Axel Lin d59d9ebaac drivers/video/backlight/l4f00242t03.c: return proper error in l4f00242t03_probe if regulator_get() fails
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Alberto Panizzo <alberto@amarulasolutions.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-23 08:38:48 -08:00
Axel Lin 36c3e75907 drivers/video/backlight/adp88x0_bl.c: fix bit testing logic
We need to write new value if the bit mask fields of new value is not
equal to old value.  It does not make sense to write new value only when
all the bit_mask bits are zero.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Michael Hennerich <michael.hennerich@analog.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-23 08:38:48 -08:00
Finn Thain d9070fc499 macfb: fix black and white modes
macfb won't init in black & white modes since fb_alloc_cmap() no longer
works for zero cmap length. Fix this and also clean up a few printk's and
some stylistic inconsistencies.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-01-22 14:50:02 +01:00
Tony Lindgren 967809bd7f Merge branch 'omap1-part2' into omap1
Conflicts:
	drivers/leds/leds-ams-delta.c
2012-01-20 05:31:52 -08:00
Linus Torvalds 57f2685c16 Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dma
* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (53 commits)
  ARM: mach-shmobile: specify CHCLR registers on SH7372
  dma: shdma: fix runtime PM: clear channel buffers on reset
  dma/imx-sdma: save irq flags when use spin_lock in sdma_tx_submit
  dmaengine/ste_dma40: clear LNK on channel startup
  dmaengine: intel_mid_dma: remove legacy pm interface
  ASoC: mxs: correct 'direction' of device_prep_dma_cyclic
  dmaengine: intel_mid_dma: error path fix
  dmaengine: intel_mid_dma: locking and freeing fixes
  mtd: gpmi-nand: move to dma_transfer_direction
  mtd: fix compile error for gpmi-nand
  mmc: mxs-mmc: fix the dma_transfer_direction migration
  dmaengine: add DMA_TRANS_NONE to dma_transfer_direction
  dma: mxs-dma: Don't use CLKGATE bits in CTRL0 to disable DMA channels
  dma: mxs-dma: make mxs_dma_prep_slave_sg() multi user safe
  dma: mxs-dma: Always leave mxs_dma_init() with the clock disabled.
  dma: mxs-dma: fix a typo in comment
  DMA: PL330: Remove pm_runtime_xxx calls from pl330 probe/remove
  video i.MX IPU: Fix display connections
  i.MX IPU DMA: Fix wrong burstsize settings
  dmaengine/ste_dma40: allow fixed physical channel
  ...

Fix up conflicts in drivers/dma/{Kconfig,mxs-dma.c,pl330.c}

The conflicts looked pretty trivial, but I'll ask people to verify them.
2012-01-17 18:40:24 -08:00
Paul Mundt 0c929238ca Merge branch 'sh/platform-updates' into sh-latest 2012-01-17 22:55:28 +10:00
Linus Torvalds 51be08419d Merge branch 'fbdev-next' of git://github.com/schandinat/linux-2.6
* 'fbdev-next' of git://github.com/schandinat/linux-2.6: (175 commits)
  module_param: make bool parameters really bool (drivers/video/i810)
  Revert "atmel_lcdfb: Adjust HFP calculation so it matches the manual."
  OMAPDSS: HDMI: Disable DDC internal pull up
  OMAPDSS: HDMI: Move duplicate code from boardfile
  OMAPDSS: add OrtusTech COM43H4M10XTC display support
  OMAP: DSS2: Support for UMSH-8173MD TFT panel
  ASoC: OMAP: HDMI: Move HDMI codec trigger function to generic HDMI driver
  OMAPDSS: HDMI: Create function to enable HDMI audio
  ASoC: OMAP: HDMI: Correct signature of ASoC functions
  ASoC: OMAP: HDMI: Introduce driver data for audio codec
  grvga: fix section mismatch warnings
  video: s3c-fb: Don't keep device runtime active when open
  video: s3c-fb: Hold runtime PM references when touching registers
  video: s3c-fb: Take a runtime PM reference when unblanked
  video: s3c-fb: Disable runtime PM in error paths from probe
  video: s3c-fb: Use s3c_fb_enable() to enable the framebuffer
  video: s3c-fb: Make runtime PM functional again
  drivers/video: fsl-diu-fb: merge fsl_diu_alloc() into map_video_memory()
  drivers/video: fsl-diu-fb: add default platform ops functions
  drivers/video: fsl-diu-fb: remove broken reference count enabling the display
  ...
2012-01-14 15:11:19 -08:00
Linus Torvalds 4964e0664c Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (119 commits)
  MIPS: Delete unused function add_temporary_entry.
  MIPS: Set default pci cache line size.
  MIPS: Flush huge TLB
  MIPS: Octeon: Remove SYS_SUPPORTS_HIGHMEM.
  MIPS: Octeon: Add support for OCTEON II PCIe
  MIPS: Octeon: Update PCI Latency timer and enable more error reporting.
  MIPS: Alchemy: Update cpu-feature-overrides
  MIPS: Alchemy: db1200: Improve PB1200 detection.
  MIPS: Alchemy: merge Au1000 and Au1300-style IRQ controller code.
  MIPS: Alchemy: chain IRQ controllers to MIPS IRQ controller
  MIPS: Alchemy: irq: register pm at irq init time
  MIPS: Alchemy: Touchscreen support on DB1100
  MIPS: Alchemy: Hook up IrDA on DB1000/DB1100
  net/irda: convert au1k_ir to platform driver.
  MIPS: Alchemy: remove unused board headers
  MTD: nand: make au1550nd.c a platform_driver
  MIPS: Netlogic: Mark Netlogic chips as SMT capable
  MIPS: Netlogic: Add support for XLP 3XX cores
  MIPS: Netlogic: Merge some of XLR/XLP wakup code
  MIPS: Netlogic: Add default XLP config.
  ...

Fix up trivial conflicts in arch/mips/kernel/{perf_event_mipsxx.c,
traps.c} and drivers/tty/serial/Makefile
2012-01-14 13:05:21 -08:00
Linus Torvalds 0a80939b3e Autogenerated GPG tag for Rusty D1ADB8F1: 15EE 8D6C AB0E 7F0C F999 BFCB D920 0E6C D1AD B8F1
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPD2aFAAoJENkgDmzRrbjxNzsQAIeYbbrXYLjr6kQzUSngj/eC
 FzjaTEfYTQIeuQCFJHcHthyc5lXV4sQbo3jOezW+Bp5yuDJL2aWIHesSfWZe7imu
 zQdM4VshOYdAmUR9Q0AW5zhB8Smbs7/AyABiF2jm4p0ZPOuyMDSlei9sjvE9Vjvt
 B7g5ht7L6kz0JbDnwwy0u5gs+tEitwpXYId9Y4ysZIBzIbL0qkPX8veOddGTMy0N
 8xhWXaKtufpjvxFD2ORLDsw3AkoF1xXSNuFd/5nzCNpbeE7TW931jfkPoqJumuAO
 7GLxcU9kKYl+IICobC6wBtsj/RrB7w+cBXMvPGwdBliam1qaRhUcJZi5FLM/Ha5d
 2A9QDYNUpoXiO8JbPXrV9Z+Y0+Co8RilsQj7R/rjZh6AbbYCWt9nxzx2Svl/RfTr
 xfiimHuB2P3rHjOvpCXULwOOuE5c8MzPuWncpdjiD3uGXOY/aY+X1m+if/quJw9D
 grPlKL0+YiRakEYUeGG4M77KCqyKFZaF7L7UQPbqfZcj8V/9AW3/7U5I/B9RlAjs
 idsr4fcf5s0N+oKUyTCW1ncpUDQNiwbU2NyJQqeu1ZxaRGj72AgyvsaNeyIPDyK+
 f6x95Bi7i8KLjXc9Z1KvJwh2Nxt25gNUiTYVha/9H2NpJGd1cfI15kTOGXrgddVv
 1pvuGcJDZwYiwfiXr3FL
 =HHrh
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://github.com/rustyrussell/linux

Autogenerated GPG tag for Rusty D1ADB8F1: 15EE 8D6C AB0E 7F0C F999  BFCB D920 0E6C D1AD B8F1

* tag 'for-linus' of git://github.com/rustyrussell/linux:
  module_param: check that bool parameters really are bool.
  intelfbdrv.c: bailearly is an int module_param
  paride/pcd: fix bool verbose module parameter.
  module_param: make bool parameters really bool (drivers & misc)
  module_param: make bool parameters really bool (arch)
  module_param: make bool parameters really bool (core code)
  kernel/async: remove redundant declaration.
  printk: fix unnecessary module_param_name.
  lirc_parallel: fix module parameter description.
  module_param: avoid bool abuse, add bint for special cases.
  module_param: check type correctness for module_param_array
  modpost: use linker section to generate table.
  modpost: use a table rather than a giant if/else statement.
  modules: sysfs - export: taint, coresize, initsize
  kernel/params: replace DEBUGP with pr_debug
  module: replace DEBUGP with pr_debug
  module: struct module_ref should contains long fields
  module: Fix performance regression on modules with large symbol tables
  module: Add comments describing how the "strmap" logic works

Fix up conflicts in scripts/mod/file2alias.c due to the new linker-
generated table approach to adding __mod_*_device_table entries.  The
ARM sa11x0 mcp bus needed to be converted to that too.
2012-01-14 12:32:16 -08:00
Paul Mundt 6d7120a713 video: pvr2fb: Fix up spurious section mismatch warnings.
pvr2fb special cases its init/exit routines which causes spurious section
mismatches. Set the board_driver array __refdata to silence them.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-01-13 16:42:50 +09:00
Andrew Morton 08346bf805 drivers/video/nvidia/nvidia.c: fix warning
Fix the int/bool confusion in there.

  drivers/video/nvidia/nvidia.c:1602: warning: return from incompatible pointer type

Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-12 20:13:03 -08:00
Rusty Russell f787f32e67 module_param: make bool parameters really bool (drivers/video/i810)
module_param(bool) used to counter-intuitively take an int.  In
fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy
trick.

It's time to remove the int/unsigned int option.  For this version
it'll simply give a warning, but it'll break next kernel version.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-01-12 23:28:59 +00:00