Commit Graph

29 Commits

Author SHA1 Message Date
KOSAKI Motohiro fb1fece5da sparc: convert old cpumask API into new one
Adapt new API. Almost change is trivial, most important change are to
remove following like =operator.

 cpumask_t cpu_mask = *mm_cpumask(mm);
 cpus_allowed = current->cpus_allowed;

Because cpumask_var_t is =operator unsafe. These usage might prevent
kernel core improvement.

No functional change.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-16 13:38:07 -07:00
Daniel Hellstrom ecbc42b70a sparc32, sun4m: Implemented SMP IPIs support for SUN4M machines
Implement the three IPIs (resched, single and cpu-mask) generation
and interrupt handler catch. The sun4m has 15 soft-IRQs and three
of them is used with this patch, the three IPIs was previously
implemented with the cross-call IRQ15 which does not work with
locking routines such as spinlocks because IRQ15 is NMI, it may
cause deadlock.

The IRQ trap handler code assumes (in the same spritit as the old
it seems) that hard interrupts will be generated until handled
(level), when a IRQ happens the IRQ pending register is checked
for pending soft-IRQs. When both hard and soft IRQ happens at the
same time only soft-IRQs are handled.

The old code implemented a soft-IRQ traphandler at IRQ14 which
called smp_reschedule_irq which in turn called set_need_resched.
It seems to be an old relic and is replaced with the interrupt
traphander exit code RESTORE_ALL, it calls schedule() when
appropriate.

Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-16 13:07:44 -07:00
Sam Ravnborg 9c2853af1f sparc32: probe for cpu info only during startup
We did a cpu_probe() call each time a CPU got online - which
only effect was to save latest CPU/FPU info for use by show_cpuinfo().
Use same setup as for sparc64 where we probe for this info during startup,
and only once.

This allowed us to annotate a few functions __init which again
fixed the following section mismatch warnings:

WARNING: vmlinux.o(.text+0x65f0): Section mismatch in reference from the function set_cpu_and_fpu() to the (unknown reference) .init.rodata:(unknown)
WARNING: vmlinux.o(.text+0x65f8): Section mismatch in reference from the function set_cpu_and_fpu() to the (unknown reference) .init.rodata:(unknown)
WARNING: vmlinux.o(.text+0x664c): Section mismatch in reference from the function set_cpu_and_fpu() to the variable .init.rodata:manufacturer_info
WARNING: vmlinux.o(.text+0x6650): Section mismatch in reference from the function set_cpu_and_fpu() to the variable .init.rodata:manufacturer_info

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-21 15:46:21 -07:00
Sam Ravnborg 6baa9b20a6 sparc32: genirq support
The conversion of sparc32 to genirq is based on original work done
by David S. Miller.
Daniel Hellstrom has helped in the conversion and implemented
the shutdowm functionality.
Marcel van Nies <morcles@gmail.com> has tested this on Sparc Station 20

Test status:
sun4c      - not tested
sun4m,pci  - not tested
sun4m,sbus - tested (Sparc Classic, Sparc Station 5, Sparc Station 20)
sun4d      - not tested
leon       - tested on various combinations of leon boards,
             including SMP variants

generic
   Introduce use of GENERIC_HARDIRQS and GENERIC_IRQ_SHOW
   Allocate 64 IRQs - which is enough even for SS2000
   Use a table of irq_bucket to maintain uses IRQs
      irq_bucket is also used to chain several irq's that
      must be called when the same intrrupt is asserted
   Use irq_link to link a interrupt source to the irq
   All plafforms must now supply their own build_device_irq method
   handler_irq rewriten to use generic irq support

floppy
   Read FLOPPY_IRQ from platform device
   Use generic request_irq to register the floppy interrupt
   Rewrote sparc_floppy_irq to use the generic irq support

pcic:
   Introduce irq_chip
   Store mask in chip_data for use in mask/unmask functions
   Add build_device_irq for pcic
   Use pcic_build_device_irq in pci_time_init
   allocate virtual irqs in pcic_fill_irq

sun4c:
   Introduce irq_chip
   Store mask in chip_data for use in mask/unmask functions
   Add build_device_irq for sun4c
   Use sun4c_build_device_irq in sun4c_init_timers

sun4m:
   Introduce irq_chip
   Introduce dedicated mask/unmask methods
   Introduce sun4m_handler_data that allow easy access to necessary
     data in the mask/unmask functions
   Add a helper method to enable profile_timer (used from smp)
   Added sun4m_build_device_irq
   Use sun4m_build_device_irq in sun4m_init_timers

   TODO:
      There is no replacement for smp_rotate that always scheduled
      next CPU as interrupt target upon an interrupt

sun4d:
   Introduce irq_chip
   Introduce dedicated mask/unmask methods
   Introduce sun4d_handler_data that allow easy access to
   necessary data in mask/unmask fuctions
   Rewrote sun4d_handler_irq to use generic irq support

   TODO:
      The original implmentation of enable/disable had:

          if (irq < NR_IRQS)
               return;

      The new implmentation does not distingush between SBUS and cpu
      interrupts.
      I am no sure what is right here. I assume we need to do
      something for the cpu interrupts.

      I have not succeeded booting my sun4d box (with or without this patch)
      and my understanding of this platfrom is limited.
      So I would be a bit suprised if this works.

leon:
   Introduce irq_chip
   Store mask in chip_data for use in mask/unmask functions
   Add build_device_irq for leon
   Use leon_build_device_irq in leon_init_timers

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Daniel Hellstrom <daniel@gaisler.com>
Tested-by: Daniel Hellstrom <daniel@gaisler.com>
Tested-by: Marcel van Nies <morcles@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-19 22:11:40 -07:00
Sam Ravnborg aba20a8295 sparc32,sun4m: irq, smp files cleanup
- drop filename in file header
- drop unused includes
- add description of sun4m interrupts (from davem)
- add KERN_* to printk
- fix spaces => tabs
- add spaces after reserved words
- drop all externs, they are now in header files

This is partly based on a patch from: David Miller <davem@davemloft.net>

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-16 18:19:09 -07:00
David S. Miller a9919646d1 sparc32: Kill trap table freeing code.
Normally, srmmu uses different trap table register values to allow
determination of the cpu we're on.  All of the trap tables have
identical content, they just sit at different offsets from the first
trap table, and the offset shifted down and masked out determines
the cpu we are on.

The code tries to free them up when they aren't actually used
(don't have all 4 cpus, we're on sun4d, etc.) but that causes
problems.

For one thing it triggers false positives in the DMA debugging
code.  And fixing that up while preserving this relative offset
thing isn't trivial.

So just kill the freeing code, it costs us at most 3 pages, big
deal...

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-18 23:44:08 -07:00
Rusty Russell ec7c14bde8 cpumask: prepare for iterators to only go to nr_cpu_ids/nr_cpumask_bits.: sparc
Impact: cleanup, futureproof

In fact, all cpumask ops will only be valid (in general) for bit
numbers < nr_cpu_ids.  So use that instead of NR_CPUS in various
places.

This is always safe: no cpu number can be >= nr_cpu_ids, and
nr_cpu_ids is initialized to NR_CPUS at boot.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
2009-03-16 14:40:24 +10:30
Rusty Russell fe73971cdd cpumask: Use accessors code: sparc
Impact: use new API

Use the accessors rather than frobbing bits directly.  Most of this is
in arch code I haven't even compiled, but it is mostly straightforward.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
2009-03-16 14:40:22 +10:30
Wu Fengguang 1a8a27c974 generic swap(): sparc: rename swap() to swap_ulong()
In preparation for the introduction of a generic swap() macro.

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 08:31:14 -08:00
Al Viro 409832f548 sparc32 cpuinit flase positives
All noise since we don't have CPU hotplug there.  However, they
did expose something very odd-looking in there - poke_viking()
does a bunch of identical btfixup each time it's called (i.e.
for each CPU).  That one is left alone for now; just the trivial
misannotation fixes.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-30 10:03:35 -08:00
Robert Reif 4245e59d12 sparc32: fix build errors
arch/sparc/kernel/sun4d_smp.c: In function ‘smp4d_callin’:
arch/sparc/kernel/sun4d_smp.c:101: error: implicit declaration of function ‘notify_cpu_starting’
arch/sparc/kernel/sun4m_smp.c: In function ‘smp4m_callin’:
arch/sparc/kernel/sun4m_smp.c:74: error: implicit declaration of function ‘notify_cpu_starting’

Signed-off-by: Robert Reif <reif@earthlink.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-12 23:55:45 -07:00
David S. Miller 56c5d900db Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:

	sound/core/memalloc.c
2008-10-11 12:39:35 -07:00
David S. Miller 1de937a536 sparc32: Call sun4m_clear_profile_irq() directly from sun4m_smp.c
This is the only use of the clear_profile_irq() btfixup entry,
which just eats up lots of dead space on other platform types.

A subsequent commit will delete the other implementations and
the btfixup entry as well.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-19 21:17:58 -07:00
Manfred Spraul e545a6140b kernel/cpu.c: create a CPU_STARTING cpu_chain notifier
Right now, there is no notifier that is called on a new cpu, before the new
cpu begins processing interrupts/softirqs.
Various kernel function would need that notification, e.g. kvm works around
by calling smp_call_function_single(), rcu polls cpu_online_map.

The patch adds a CPU_STARTING notification. It also adds a helper function
that sends the message to all cpu_chain handlers.

Tested on x86-64.
All other archs are untested. Especially on sparc, I'm not sure if I got
it right.

Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-08 19:25:24 +02:00
David S. Miller 66e4f8c076 sparc32: Implement smp_call_function_single().
Reported by Stephen Rothwell.

Needed to fix the build when CONFIG_RELAY is enabled.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-27 20:03:22 -07:00
Adrian Bunk c61c65cdcd sparc/kernel/: possible cleanups
This patch contains the following possible cleanups:
- make the following needlessly global code static:
  - apc.c: apc_swift_idle()
  - ebus.c: ebus_blacklist_irq()
  - ebus.c: fill_ebus_child()
  - ebus.c: fill_ebus_device()
  - entry.S: syscall_is_too_hard
  - etra: tsetup_sun4c_stackchk
  - head.S: cputyp
  - head.S: prom_vector_p
  - idprom.c: Sun_Machines[]
  - ioport.c: _sparc_find_resource()
  - ioport.c: create_proc_read_entry()
  - irq.c: struct sparc_irq[]
  - rtrap.S: sun4c_rett_stackchk
  - setup.c: prom_sync_me()
  - setup.c: boot_flags
  - sun4c_irq.c: sun4c_sbint_to_irq()
  - sun4d_irq.c: sbus_tid[]
  - sun4d_irq.c: struct sbus_actions
  - sun4d_irq.c: sun4d_sbint_to_irq()
  - sun4m_irq.c: sun4m_sbint_to_irq()
  - sun4m_irq.c: sun4m_get_irqmask()
  - sun4m_irq.c: sun4m_timers
  - sun4m_smp.c: smp4m_cross_call()
  - sun4m_smp.c: smp4m_blackbox_id()
  - sun4m_smp.c: smp4m_blackbox_current()
  - time.c: sp_clock_typ
  - time.c: sbus_time_init()
  - traps.c: instruction_dump()
  - wof.S: spwin_sun4c_stackchk
  - wuf.S: sun4c_fwin_stackchk
- #if 0 the following unused code:
  - process.c: sparc_backtrace_lock
  - process.c: __show_backtrace()
  - process.c: show_backtrace()
  - process.c: smp_show_backtrace_all_cpus()
- remove the following unused code:
  - entry.S: __handle_exception
  - smp.c: smp_num_cpus
  - smp.c: smp_activated
  - smp.c: __cpu_number_map[]
  - smp.c: __cpu_logical_map[]
  - smp.c: bitops_spinlock
  - traps.c: trap_curbuf
  - traps.c: trapbuf[]
  - traps.c: linux_smp_still_initting
  - traps.c: thiscpus_tbr
  - traps.c: thiscpus_mid

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-17 21:37:46 -07:00
David S. Miller 0a9e9b110c sparc32: Kill smp_message_pass() and related code.
Completely unused, and it just makes the SMP message
passing code on 32-bit sparc look more complex than
it is.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-29 01:14:10 -07:00
Adrian Bunk 6c81c32f96 calibrate_delay() must be __cpuinit
calibrate_delay() must be __cpuinit, not __{dev,}init.

I've verified that this is correct for all users.

While doing the latter, I also did the following cleanups:
- remove pointless additional prototypes in C files
- ensure all users #include <linux/delay.h>

This fixes the following section mismatches with CONFIG_HOTPLUG=n,
CONFIG_HOTPLUG_CPU=y:

WARNING: vmlinux.o(.text+0x1128d): Section mismatch: reference to .init.text.1:calibrate_delay (between 'check_cx686_slop' and 'set_cx86_reorder')
WARNING: vmlinux.o(.text+0x25102): Section mismatch: reference to .init.text.1:calibrate_delay (between 'smp_callin' and 'cpu_coregroup_map')

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Christian Zankel <chris@zankel.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 10:41:08 -08:00
Al Viro 32231a66b4 [SPARC32]: clean include/asm-sparc/irq.h
Move stuff used only by arch/sparc/kernel/* into arch/sparc/kernel/irq.h
and into individual files in there (e.g. macros internal to sun4m_irq.c,
etc.)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-21 19:18:57 -07:00
Randy Dunlap e63340ae6b header cleaning: don't include smp_lock.h when not used
Remove includes of <linux/smp_lock.h> where it is not used/needed.
Suggested by Al Viro.

Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc,
sparc64, and arm (all 59 defconfigs).

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:07 -07:00
David S. Miller 4cad69174f [SPARC]: Fix comment typo in smp4m_blackbox_current().
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-06 22:43:46 -07:00
Al Viro 0d84438d98 [PATCH] sparc32 pt_regs fixes
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-08 12:32:35 -07:00
Krzysztof Helt 5fec811e99 [SPARC]: Small smp cleanup.
It moves the smp_procesors_ready variable to sun4d_smp.c only.

Signed-off-by: Krzysztof Helt (krzysztof.h1@wp.pl)
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-26 17:52:56 -07:00
Bob Breuer 92d452f0eb [SPARC]: Mark smp init functions as cpuinit
Fix the smp related section mismatch warnings by marking the smp init
functions as cpuinit.

Signed-off-by: Bob Breuer <breuerr@mc.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-20 00:36:10 -07:00
Bob Breuer a54123e277 [SPARC]: Try to start getting SMP back into shape.
Todo items:
 - IRQ_INPROGRESS flag - use sparc64 irq buckets, or generic irq_desc?
 - sun4d
 - re-indent large chunks of sun4m_smp.c
 - some places assume sequential cpu numbering (i.e. 0,1 instead of 0,2)

Last I checked (with 2.6.14), random programs segfault with dual
HyperSPARC.  And with SuperSPARC II's, it seems stable but will
eventually die from a write lock error (wrong lock owner or something).

I haven't tried the HyperSPARC + highmem combination recently, so that
may still be a problem.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-23 22:36:19 -08:00
Andrew Morton 394e3902c5 [PATCH] more for_each_cpu() conversions
When we stop allocating percpu memory for not-possible CPUs we must not touch
the percpu data for not-possible CPUs at all.  The correct way of doing this
is to test cpu_possible() or to use for_each_cpu().

This patch is a kernel-wide sweep of all instances of NR_CPUS.  I found very
few instances of this bug, if any.  But the patch converts lots of open-coded
test to use the preferred helper macros.

Cc: Mikael Starvik <starvik@axis.com>
Cc: David Howells <dhowells@redhat.com>
Acked-by: Kyle McMartin <kyle@parisc-linux.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Andi Kleen <ak@muc.de>
Cc: Christian Zankel <chris@zankel.net>
Cc: Philippe Elie <phil.el@wanadoo.fr>
Cc: Nathan Scott <nathans@sgi.com>
Cc: Jens Axboe <axboe@suse.de>
Cc: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 07:38:17 -08:00
Nick Piggin 7835e98b2e [PATCH] remove set_page_count() outside mm/
set_page_count usage outside mm/ is limited to setting the refcount to 1.
Remove set_page_count from outside mm/, and replace those users with
init_page_count() and set_page_refcounted().

This allows more debug checking, and tighter control on how code is allowed
to play around with page->_count.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-22 07:54:02 -08:00
Al Viro d562ef6a23 [PATCH] sparc: task_thread_info()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-12 09:08:53 -08:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00