If JOBCTL_TASK_WORK is already set on the targeted task, then we need
not go through {lock,unlock}_task_sighand() to set it again and queue
a signal wakeup. This is safe as we're checking it _after_ adding the
new task_work with cmpxchg().
The ordering is as follows:
task_work_add() get_signal()
--------------------------------------------------------------
STORE(task->task_works, new_work); STORE(task->jobctl);
mb(); mb();
LOAD(task->jobctl); LOAD(task->task_works);
This speeds up TWA_SIGNAL handling quite a bit, which is important now
that io_uring is relying on it for all task_work deliveries.
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jann Horn <jannh@google.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
So that the target task will exit the wait_event_interruptible-like
loop and call task_work_run() asap.
The patch turns "bool notify" into 0,TWA_RESUME,TWA_SIGNAL enum, the
new TWA_SIGNAL flag implies signal_wake_up(). However, it needs to
avoid the race with recalc_sigpending(), so the patch also adds the
new JOBCTL_TASK_WORK bit included in JOBCTL_PENDING_MASK.
TODO: once this patch is merged we need to change all current users
of task_work_add(notify = true) to use TWA_RESUME.
Cc: stable@vger.kernel.org # v5.7
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull uaccess/coredump updates from Al Viro:
"set_fs() removal in coredump-related area - mostly Christoph's
stuff..."
* 'work.set_fs-exec' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
binfmt_elf_fdpic: remove the set_fs(KERNEL_DS) in elf_fdpic_core_dump
binfmt_elf: remove the set_fs(KERNEL_DS) in elf_core_dump
binfmt_elf: remove the set_fs in fill_siginfo_note
signal: refactor copy_siginfo_to_user32
powerpc/spufs: simplify spufs core dumping
powerpc/spufs: stop using access_ok
powerpc/spufs: fix copy_to_user while atomic
Factor out a copy_siginfo_to_external32 helper from
copy_siginfo_to_user32 that fills out the compat_siginfo, but does so
on a kernel space data structure. With that we can let architectures
override copy_siginfo_to_user32 with their own implementations using
copy_siginfo_to_external32. That allows moving the x32 SIGCHLD purely
to x86 architecture code.
As a nice side effect copy_siginfo_to_external32 also comes in handy
for avoiding a set_fs() call in the coredump code later on.
Contains improvements from Eric W. Biederman <ebiederm@xmission.com>
and Arnd Bergmann <arnd@arndb.de>.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull SIGCHLD fix from Eric Biederman:
"Christof Meerwald reported that do_notify_parent has not been
successfully populating si_pid and si_uid for multi-threaded
processes.
This is the one-liner fix. Strictly speaking a one-liner plus
comment"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
signal: Avoid corrupting si_pid and si_uid in do_notify_parent
Christof Meerwald <cmeerw@cmeerw.org> writes:
> Hi,
>
> this is probably related to commit
> 7a0cf09494 (signal: Correct namespace
> fixups of si_pid and si_uid).
>
> With a 5.6.5 kernel I am seeing SIGCHLD signals that don't include a
> properly set si_pid field - this seems to happen for multi-threaded
> child processes.
>
> A simple test program (based on the sample from the signalfd man page):
>
> #include <sys/signalfd.h>
> #include <signal.h>
> #include <unistd.h>
> #include <spawn.h>
> #include <stdlib.h>
> #include <stdio.h>
>
> #define handle_error(msg) \
> do { perror(msg); exit(EXIT_FAILURE); } while (0)
>
> int main(int argc, char *argv[])
> {
> sigset_t mask;
> int sfd;
> struct signalfd_siginfo fdsi;
> ssize_t s;
>
> sigemptyset(&mask);
> sigaddset(&mask, SIGCHLD);
>
> if (sigprocmask(SIG_BLOCK, &mask, NULL) == -1)
> handle_error("sigprocmask");
>
> pid_t chldpid;
> char *chldargv[] = { "./sfdclient", NULL };
> posix_spawn(&chldpid, "./sfdclient", NULL, NULL, chldargv, NULL);
>
> sfd = signalfd(-1, &mask, 0);
> if (sfd == -1)
> handle_error("signalfd");
>
> for (;;) {
> s = read(sfd, &fdsi, sizeof(struct signalfd_siginfo));
> if (s != sizeof(struct signalfd_siginfo))
> handle_error("read");
>
> if (fdsi.ssi_signo == SIGCHLD) {
> printf("Got SIGCHLD %d %d %d %d\n",
> fdsi.ssi_status, fdsi.ssi_code,
> fdsi.ssi_uid, fdsi.ssi_pid);
> return 0;
> } else {
> printf("Read unexpected signal\n");
> }
> }
> }
>
>
> and a multi-threaded client to test with:
>
> #include <unistd.h>
> #include <pthread.h>
>
> void *f(void *arg)
> {
> sleep(100);
> }
>
> int main()
> {
> pthread_t t[8];
>
> for (int i = 0; i != 8; ++i)
> {
> pthread_create(&t[i], NULL, f, NULL);
> }
> }
>
> I tried to do a bit of debugging and what seems to be happening is
> that
>
> /* From an ancestor pid namespace? */
> if (!task_pid_nr_ns(current, task_active_pid_ns(t))) {
>
> fails inside task_pid_nr_ns because the check for "pid_alive" fails.
>
> This code seems to be called from do_notify_parent and there we
> actually have "tsk != current" (I am assuming both are threads of the
> current process?)
I instrumented the code with a warning and received the following backtrace:
> WARNING: CPU: 0 PID: 777 at kernel/pid.c:501 __task_pid_nr_ns.cold.6+0xc/0x15
> Modules linked in:
> CPU: 0 PID: 777 Comm: sfdclient Not tainted 5.7.0-rc1userns+ #2924
> Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
> RIP: 0010:__task_pid_nr_ns.cold.6+0xc/0x15
> Code: ff 66 90 48 83 ec 08 89 7c 24 04 48 8d 7e 08 48 8d 74 24 04 e8 9a b6 44 00 48 83 c4 08 c3 48 c7 c7 59 9f ac 82 e8 c2 c4 04 00 <0f> 0b e9 3fd
> RSP: 0018:ffffc9000042fbf8 EFLAGS: 00010046
> RAX: 000000000000000c RBX: 0000000000000000 RCX: ffffc9000042faf4
> RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff81193d29
> RBP: ffffc9000042fc18 R08: 0000000000000000 R09: 0000000000000001
> R10: 000000100f938416 R11: 0000000000000309 R12: ffff8880b941c140
> R13: 0000000000000000 R14: 0000000000000000 R15: ffff8880b941c140
> FS: 0000000000000000(0000) GS:ffff8880bca00000(0000) knlGS:0000000000000000
> CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> CR2: 00007f2e8c0a32e0 CR3: 0000000002e10000 CR4: 00000000000006f0
> Call Trace:
> send_signal+0x1c8/0x310
> do_notify_parent+0x50f/0x550
> release_task.part.21+0x4fd/0x620
> do_exit+0x6f6/0xaf0
> do_group_exit+0x42/0xb0
> get_signal+0x13b/0xbb0
> do_signal+0x2b/0x670
> ? __audit_syscall_exit+0x24d/0x2b0
> ? rcu_read_lock_sched_held+0x4d/0x60
> ? kfree+0x24c/0x2b0
> do_syscall_64+0x176/0x640
> ? trace_hardirqs_off_thunk+0x1a/0x1c
> entry_SYSCALL_64_after_hwframe+0x49/0xb3
The immediate problem is as Christof noticed that "pid_alive(current) == false".
This happens because do_notify_parent is called from the last thread to exit
in a process after that thread has been reaped.
The bigger issue is that do_notify_parent can be called from any
process that manages to wait on a thread of a multi-threaded process
from wait_task_zombie. So any logic based upon current for
do_notify_parent is just nonsense, as current can be pretty much
anything.
So change do_notify_parent to call __send_signal directly.
Inspecting the code it appears this problem has existed since the pid
namespace support started handling this case in 2.6.30. This fix only
backports to 7a0cf09494 ("signal: Correct namespace fixups of si_pid and si_uid")
where the problem logic was moved out of __send_signal and into send_signal.
Cc: stable@vger.kernel.org
Fixes: 6588c1e3ff ("signals: SI_USER: Masquerade si_pid when crossing pid ns boundary")
Ref: 921cf9f630 ("signals: protect cinit from unblocked SIG_DFL signals")
Link: https://lore.kernel.org/lkml/20200419201336.GI22017@edge.cmeerw.net/
Reported-by: Christof Meerwald <cmeerw@cmeerw.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
signal.c provides kill_proc_info, we can use it instead of kill_pid_info
in kill_something_info func gracefully.
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/80236965-f0b5-c888-95ff-855bdec75bb3@huawei.com
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
In kill_pid_usb_asyncio, if signal is not valid, we do not need to
set info struct.
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/f525fd08-1cf7-fb09-d20c-4359145eb940@huawei.com
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Pull exec/proc updates from Eric Biederman:
"This contains two significant pieces of work: the work to sort out
proc_flush_task, and the work to solve a deadlock between strace and
exec.
Fixing proc_flush_task so that it no longer requires a persistent
mount makes improvements to proc possible. The removal of the
persistent mount solves an old regression that that caused the hidepid
mount option to only work on remount not on mount. The regression was
found and reported by the Android folks. This further allows Alexey
Gladkov's work making proc mount options specific to an individual
mount of proc to move forward.
The work on exec starts solving a long standing issue with exec that
it takes mutexes of blocking userspace applications, which makes exec
extremely deadlock prone. For the moment this adds a second mutex with
a narrower scope that handles all of the easy cases. Which makes the
tricky cases easy to spot. With a little luck the code to solve those
deadlocks will be ready by next merge window"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (25 commits)
signal: Extend exec_id to 64bits
pidfd: Use new infrastructure to fix deadlocks in execve
perf: Use new infrastructure to fix deadlocks in execve
proc: io_accounting: Use new infrastructure to fix deadlocks in execve
proc: Use new infrastructure to fix deadlocks in execve
kernel/kcmp.c: Use new infrastructure to fix deadlocks in execve
kernel: doc: remove outdated comment cred.c
mm: docs: Fix a comment in process_vm_rw_core
selftests/ptrace: add test cases for dead-locks
exec: Fix a deadlock in strace
exec: Add exec_update_mutex to replace cred_guard_mutex
exec: Move exec_mmap right after de_thread in flush_old_exec
exec: Move cleanup of posix timers on exec out of de_thread
exec: Factor unshare_sighand out of de_thread and call it separately
exec: Only compute current once in flush_old_exec
pid: Improve the comment about waiting in zap_pid_ns_processes
proc: Remove the now unnecessary internal mount of proc
uml: Create a private mount of proc for mconsole
uml: Don't consult current to find the proc_mnt in mconsole_proc
proc: Use a list of inodes to flush from proc
...
Replace the 32bit exec_id with a 64bit exec_id to make it impossible
to wrap the exec_id counter. With care an attacker can cause exec_id
wrap and send arbitrary signals to a newly exec'd parent. This
bypasses the signal sending checks if the parent changes their
credentials during exec.
The severity of this problem can been seen that in my limited testing
of a 32bit exec_id it can take as little as 19s to exec 65536 times.
Which means that it can take as little as 14 days to wrap a 32bit
exec_id. Adam Zabrocki has succeeded wrapping the self_exe_id in 7
days. Even my slower timing is in the uptime of a typical server.
Which means self_exec_id is simply a speed bump today, and if exec
gets noticably faster self_exec_id won't even be a speed bump.
Extending self_exec_id to 64bits introduces a problem on 32bit
architectures where reading self_exec_id is no longer atomic and can
take two read instructions. Which means that is is possible to hit
a window where the read value of exec_id does not match the written
value. So with very lucky timing after this change this still
remains expoiltable.
I have updated the update of exec_id on exec to use WRITE_ONCE
and the read of exec_id in do_notify_parent to use READ_ONCE
to make it clear that there is no locking between these two
locations.
Link: https://lore.kernel.org/kernel-hardening/20200324215049.GA3710@pi3.com.pl
Fixes: 2.3.23pre2
Cc: stable@vger.kernel.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
When queueing a signal, we increment both the users count of pending
signals (for RLIMIT_SIGPENDING tracking) and we increment the refcount
of the user struct itself (because we keep a reference to the user in
the signal structure in order to correctly account for it when freeing).
That turns out to be fairly expensive, because both of them are atomic
updates, and particularly under extreme signal handling pressure on big
machines, you can get a lot of cache contention on the user struct.
That can then cause horrid cacheline ping-pong when you do these
multiple accesses.
So change the reference counting to only pin the user for the _first_
pending signal, and to unpin it when the last pending signal is
dequeued. That means that when a user sees a lot of concurrent signal
queuing - which is the only situation when this matters - the only
atomic access needed is generally the 'sigpending' count update.
This was noticed because of a particularly odd timing artifact on a
dual-socket 96C/192T Cascade Lake platform: when you get into bad
contention, on that machine for some reason seems to be much worse when
the contention happens in the upper 32-byte half of the cacheline.
As a result, the kernel test robot will-it-scale 'signal1' benchmark had
an odd performance regression simply due to random alignment of the
'struct user_struct' (and pointed to a completely unrelated and
apparently nonsensical commit for the regression).
Avoiding the double increments (and decrements on the dequeueing side,
of course) makes for much less contention and hugely improved
performance on that will-it-scale microbenchmark.
Quoting Feng Tang:
"It makes a big difference, that the performance score is tripled! bump
from original 17000 to 54000. Also the gap between 5.0-rc6 and
5.0-rc6+Jiri's patch is reduced to around 2%"
[ The "2% gap" is the odd cacheline placement difference on that
platform: under the extreme contention case, the effect of which half
of the cacheline was hot was 5%, so with the reduced contention the
odd timing artifact is reduced too ]
It does help in the non-contended case too, but is not nearly as
noticeable.
Reported-and-tested-by: Feng Tang <feng.tang@intel.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Philip Li <philip.li@intel.com>
Cc: Andi Kleen <andi.kleen@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch fixes the following sparse errors by annotating the
sighand_struct with __rcu
kernel/fork.c:1511:9: error: incompatible types in comparison expression
kernel/exit.c💯19: error: incompatible types in comparison expression
kernel/signal.c:1370:27: error: incompatible types in comparison expression
This fix introduces the following sparse error in signal.c due to
checking the sighand pointer without rcu primitives:
kernel/signal.c:1386:21: error: incompatible types in comparison expression
This new sparse error is also fixed in this patch.
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20200124045908.26389-1-madhuparnabhowmik10@gmail.com
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
ptrace_stop() does preempt_enable_no_resched() to avoid the preemption,
but after that cgroup_enter_frozen() does spin_lock/unlock and this adds
another preemption point.
Reported-and-tested-by: Bruce Ashfield <bruce.ashfield@gmail.com>
Fixes: 76f969e894 ("cgroup: cgroup v2 freezer")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXXe8mQAKCRCRxhvAZXjc
ou7oAQCszihkNfpjORSSSOqenMDrxxDW++A7TIOLuq7UyZQl8QD+LM1wvT/xypfJ
ORD9XX8+Wrv07AQn85fZBEFXGrnengk=
=o+VL
-----END PGP SIGNATURE-----
Merge tag 'core-process-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull pidfd/waitid updates from Christian Brauner:
"This contains two features and various tests.
First, it adds support for waiting on process through pidfds by adding
the P_PIDFD type to the waitid() syscall. This completes the basic
functionality of the pidfd api (cf. [1]). In the meantime we also have
a new adition to the userspace projects that make use of the pidfd
api. The qt project was nice enough to send a mail pointing out that
they have a pr up to switch to the pidfd api (cf. [2]).
Second, this tag contains an extension to the waitid() syscall to make
it possible to wait on the current process group in a race free manner
(even though the actual problem is very unlikely) by specifing 0
together with the P_PGID type. This extension traces back to a
discussion on the glibc development mailing list.
There are also a range of tests for the features above. Additionally,
the test-suite which detected the pidfd-polling race we fixed in [3]
is included in this tag"
[1] https://lwn.net/Articles/794707/
[2] https://codereview.qt-project.org/c/qt/qtbase/+/108456
[3] commit b191d6491b ("pidfd: fix a poll race when setting exit_state")
* tag 'core-process-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
waitid: Add support for waiting for the current process group
tests: add pidfd poll tests
tests: move common definitions and functions into pidfd.h
pidfd: add pidfd_wait tests
pidfd: add P_PIDFD to waitid()
My recent to change to only use force_sig for a synchronous events
wound up breaking signal reception cifs and drbd. I had overlooked
the fact that by default kthreads start out with all signals set to
SIG_IGN. So a change I thought was safe turned out to have made it
impossible for those kernel thread to catch their signals.
Reverting the work on force_sig is a bad idea because what the code
was doing was very much a misuse of force_sig. As the way force_sig
ultimately allowed the signal to happen was to change the signal
handler to SIG_DFL. Which after the first signal will allow userspace
to send signals to these kernel threads. At least for
wake_ack_receiver in drbd that does not appear actively wrong.
So correct this problem by adding allow_kernel_signal that will allow
signals whose siginfo reports they were sent by the kernel through,
but will not allow userspace generated signals, and update cifs and
drbd to call allow_kernel_signal in an appropriate place so that their
thread can receive this signal.
Fixing things this way ensures that userspace won't be able to send
signals and cause problems, that it is clear which signals the
threads are expecting to receive, and it guarantees that nothing
else in the system will be affected.
This change was partly inspired by similar cifs and drbd patches that
added allow_signal.
Reported-by: ronnie sahlberg <ronniesahlberg@gmail.com>
Reported-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Tested-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Cc: Steve French <smfrench@gmail.com>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Fixes: 247bc9470b ("cifs: fix rmmod regression in cifs.ko caused by force_sig changes")
Fixes: 72abe3bcf0 ("signal/cifs: Fix cifs_put_tcp_session to call send_sig instead of force_sig")
Fixes: fee109901f ("signal/drbd: Use send_sig not force_sig")
Fixes: 3cf5d076fb ("signal: Remove task parameter from force_sig")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
The kernel-doc parser doesn't handle expressions with %foo*. Instead,
when an asterisk should be part of a constant, it uses an alternative
notation: `foo*`.
Link: http://lkml.kernel.org/r/7f18c2e0b5e39e6b7eb55ddeb043b8b260b49f2d.1563361575.git.mchehab+samsung@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds the P_PIDFD type to waitid().
One of the last remaining bits for the pidfd api is to make it possible
to wait on pidfds. With P_PIDFD added to waitid() the parts of userspace
that want to use the pidfd api to exclusively manage processes can do so
now.
One of the things this will unblock in the future is the ability to make
it possible to retrieve the exit status via waitid(P_PIDFD) for
non-parent processes if handed a _suitable_ pidfd that has this feature
set. This is similar to what you can do on FreeBSD with kqueue(). It
might even end up being possible to wait on a process as a non-parent if
an appropriate property is enabled on the pidfd.
With P_PIDFD no scoping of the process identified by the pidfd is
possible, i.e. it explicitly blocks things such as wait4(-1), wait4(0),
waitid(P_ALL), waitid(P_PGID) etc. It only allows for semantics
equivalent to wait4(pid), waitid(P_PID). Users that need scoping should
rely on pid-based wait*() syscalls for now.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Andy Lutomirsky <luto@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/20190727222229.6516-2-christian@brauner.io
Previously a condition got missed where the pidfd waiters are awakened
before the exit_state gets set. This can result in a missed notification
[1] and the polling thread waiting forever.
It is fixed now, however it would be nice to avoid this kind of issue
going unnoticed in the future. So just add a warning to catch it in the
future.
/* References */
[1]: https://lore.kernel.org/lkml/20190717172100.261204-1-joel@joelfernandes.org/
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Link: https://lore.kernel.org/r/20190724164816.201099-1-joel@joelfernandes.org
Signed-off-by: Christian Brauner <christian@brauner.io>
task->saved_sigmask and ->restore_sigmask are only used in the ret-from-
syscall paths. This means that set_user_sigmask() can save ->blocked in
->saved_sigmask and do set_restore_sigmask() to indicate that ->blocked
was modified.
This way the callers do not need 2 sigset_t's passed to set/restore and
restore_user_sigmask() renamed to restore_saved_sigmask_unless() turns
into the trivial helper which just calls restore_saved_sigmask().
Link: http://lkml.kernel.org/r/20190606113206.GA9464@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Eric Wong <e@80x24.org>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: David Laight <David.Laight@aculab.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXSMhUgAKCRCRxhvAZXjc
okkiAQC3Hlg/O2JoIb4PqgEvBkpHSdVxyuWagn0ksjACW9ANKQEAl5OadMhvOq16
UHGhKlpE/M8HflknIffoEGlIAWHrdwU=
=7kP5
-----END PGP SIGNATURE-----
Merge tag 'pidfd-updates-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull pidfd updates from Christian Brauner:
"This adds two main features.
- First, it adds polling support for pidfds. This allows process
managers to know when a (non-parent) process dies in a race-free
way.
The notification mechanism used follows the same logic that is
currently used when the parent of a task is notified of a child's
death. With this patchset it is possible to put pidfds in an
{e}poll loop and get reliable notifications for process (i.e.
thread-group) exit.
- The second feature compliments the first one by making it possible
to retrieve pollable pidfds for processes that were not created
using CLONE_PIDFD.
A lot of processes get created with traditional PID-based calls
such as fork() or clone() (without CLONE_PIDFD). For these
processes a caller can currently not create a pollable pidfd. This
is a problem for Android's low memory killer (LMK) and service
managers such as systemd.
Both patchsets are accompanied by selftests.
It's perhaps worth noting that the work done so far and the work done
in this branch for pidfd_open() and polling support do already see
some adoption:
- Android is in the process of backporting this work to all their LTS
kernels [1]
- Service managers make use of pidfd_send_signal but will need to
wait until we enable waiting on pidfds for full adoption.
- And projects I maintain make use of both pidfd_send_signal and
CLONE_PIDFD [2] and will use polling support and pidfd_open() too"
[1] https://android-review.googlesource.com/q/topic:%22pidfd+polling+support+4.9+backport%22https://android-review.googlesource.com/q/topic:%22pidfd+polling+support+4.14+backport%22https://android-review.googlesource.com/q/topic:%22pidfd+polling+support+4.19+backport%22
[2] aab6e3eb73/src/lxc/start.c (L1753)
* tag 'pidfd-updates-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
tests: add pidfd_open() tests
arch: wire-up pidfd_open()
pid: add pidfd_open()
pidfd: add polling selftests
pidfd: add polling support
Pull force_sig() argument change from Eric Biederman:
"A source of error over the years has been that force_sig has taken a
task parameter when it is only safe to use force_sig with the current
task.
The force_sig function is built for delivering synchronous signals
such as SIGSEGV where the userspace application caused a synchronous
fault (such as a page fault) and the kernel responded with a signal.
Because the name force_sig does not make this clear, and because the
force_sig takes a task parameter the function force_sig has been
abused for sending other kinds of signals over the years. Slowly those
have been fixed when the oopses have been tracked down.
This set of changes fixes the remaining abusers of force_sig and
carefully rips out the task parameter from force_sig and friends
making this kind of error almost impossible in the future"
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits)
signal/x86: Move tsk inside of CONFIG_MEMORY_FAILURE in do_sigbus
signal: Remove the signal number and task parameters from force_sig_info
signal: Factor force_sig_info_to_task out of force_sig_info
signal: Generate the siginfo in force_sig
signal: Move the computation of force into send_signal and correct it.
signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal
signal: Remove the task parameter from force_sig_fault
signal: Use force_sig_fault_to_task for the two calls that don't deliver to current
signal: Explicitly call force_sig_fault on current
signal/unicore32: Remove tsk parameter from __do_user_fault
signal/arm: Remove tsk parameter from __do_user_fault
signal/arm: Remove tsk parameter from ptrace_break
signal/nds32: Remove tsk parameter from send_sigtrap
signal/riscv: Remove tsk parameter from do_trap
signal/sh: Remove tsk parameter from force_sig_info_fault
signal/um: Remove task parameter from send_sigtrap
signal/x86: Remove task parameter from send_sigtrap
signal: Remove task parameter from force_sig_mceerr
signal: Remove task parameter from force_sig
signal: Remove task parameter from force_sigsegv
...
-----BEGIN PGP SIGNATURE-----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=8HBN
-----END PGP SIGNATURE-----
Merge tag 'audit-pr-20190702' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
"This pull request is a bit early, but with some vacation time coming
up I wanted to send this out now just in case the remote Internet Gods
decide not to smile on me once the merge window opens. The patchset
for v5.3 is pretty minor this time, the highlights include:
- When the audit daemon is sent a signal, ensure we deliver
information about the sender even when syscall auditing is not
enabled/supported.
- Add the ability to filter audit records based on network address
family.
- Tighten the audit field filtering restrictions on string based
fields.
- Cleanup the audit field filtering verification code.
- Remove a few BUG() calls from the audit code"
* tag 'audit-pr-20190702' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: remove the BUG() calls in the audit rule comparison functions
audit: enforce op for string fields
audit: add saddr_fam filter field
audit: re-structure audit field valid checks
audit: deliver signal_info regarless of syscall
This is the minimal fix for stable, I'll send cleanups later.
Commit 854a6ed568 ("signal: Add restore_user_sigmask()") introduced
the visible change which breaks user-space: a signal temporary unblocked
by set_user_sigmask() can be delivered even if the caller returns
success or timeout.
Change restore_user_sigmask() to accept the additional "interrupted"
argument which should be used instead of signal_pending() check, and
update the callers.
Eric said:
: For clarity. I don't think this is required by posix, or fundamentally to
: remove the races in select. It is what linux has always done and we have
: applications who care so I agree this fix is needed.
:
: Further in any case where the semantic change that this patch rolls back
: (aka where allowing a signal to be delivered and the select like call to
: complete) would be advantage we can do as well if not better by using
: signalfd.
:
: Michael is there any chance we can get this guarantee of the linux
: implementation of pselect and friends clearly documented. The guarantee
: that if the system call completes successfully we are guaranteed that no
: signal that is unblocked by using sigmask will be delivered?
Link: http://lkml.kernel.org/r/20190604134117.GA29963@redhat.com
Fixes: 854a6ed568 ("signal: Add restore_user_sigmask()")
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Eric Wong <e@80x24.org>
Tested-by: Eric Wong <e@80x24.org>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: <stable@vger.kernel.org> [5.0+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch adds polling support to pidfd.
Android low memory killer (LMK) needs to know when a process dies once
it is sent the kill signal. It does so by checking for the existence of
/proc/pid which is both racy and slow. For example, if a PID is reused
between when LMK sends a kill signal and checks for existence of the
PID, since the wrong PID is now possibly checked for existence.
Using the polling support, LMK will be able to get notified when a process
exists in race-free and fast way, and allows the LMK to do other things
(such as by polling on other fds) while awaiting the process being killed
to die.
For notification to polling processes, we follow the same existing
mechanism in the kernel used when the parent of the task group is to be
notified of a child's death (do_notify_parent). This is precisely when the
tasks waiting on a poll of pidfd are also awakened in this patch.
We have decided to include the waitqueue in struct pid for the following
reasons:
1. The wait queue has to survive for the lifetime of the poll. Including
it in task_struct would not be option in this case because the task can
be reaped and destroyed before the poll returns.
2. By including the struct pid for the waitqueue means that during
de_thread(), the new thread group leader automatically gets the new
waitqueue/pid even though its task_struct is different.
Appropriate test cases are added in the second patch to provide coverage of
all the cases the patch is handling.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Daniel Colascione <dancol@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Tim Murray <timmurray@google.com>
Cc: Jonathan Kowalski <bl0pbl33p@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: kernel-team@android.com
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Co-developed-by: Daniel Colascione <dancol@google.com>
Signed-off-by: Daniel Colascione <dancol@google.com>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Christian Brauner <christian@brauner.io>
Improve the comments for pidfd_send_signal().
First, the comment still referred to a file descriptor for a process as a
"task file descriptor" which stems from way back at the beginning of the
discussion. Replace this with "pidfd" for consistency.
Second, the wording for the explanation of the arguments to the syscall
was a bit inconsistent, e.g. some used the past tense some used present
tense. Make the wording more consistent.
Signed-off-by: Christian Brauner <christian@brauner.io>
In the fixes commit, removing SIGKILL from each thread signal mask and
executing "goto fatal" directly will skip the call to
"trace_signal_deliver". At this point, the delivery tracking of the
SIGKILL signal will be inaccurate.
Therefore, we need to add trace_signal_deliver before "goto fatal" after
executing sigdelset.
Note: SEND_SIG_NOINFO matches the fact that SIGKILL doesn't have any info.
Link: http://lkml.kernel.org/r/20190425025812.91424-1-weizhenliang@huawei.com
Fixes: cf43a757fd ("signal: Restore the stop PTRACE_EVENT_EXIT")
Signed-off-by: Zhenliang Wei <weizhenliang@huawei.com>
Reviewed-by: Christian Brauner <christian@brauner.io>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Ivan Delalande <colona@arista.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
force_sig_info always delivers to the current task and the signal
parameter always matches info.si_signo. So remove those parameters to
make it a simpler less error prone interface, and to make it clear
that none of the callers are doing anything clever.
This guarantees that force_sig_info will not grow any new buggy
callers that attempt to call force_sig on a non-current task, or that
pass an signal number that does not match info.si_signo.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
All callers of force_sig_info pass info.si_signo in for the signal
by definition as well as in practice.
Further all callers of force_sig_info except force_sig_fault_to_task
pass current as the target task to force_sig_info.
Factor out a static force_sig_info_to_task that
force_sig_fault_to_task can call.
This prepares the way for force_sig_info to have it's task and signal
parameters removed.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
In preparation for removing the special case in force_sig_info for
only having a signal number generate an appropriate siginfo in
force_sig the last caller of force_sig_info that does not
pass a filled out siginfo.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Forcing a signal or not allowing a pid namespace init to ignore
SIGKILL or SIGSTOP is more cleanly computed in send_signal.
There are two cases where we don't allow a pid namespace init
to ignore SIGKILL or SIGSTOP. If the sending process is
from an ancestor pid namespace and as such is effectively
the god to the target process, and if the it is the kernel
that is sending the signal, not another application.
It is known that a process is from an ancestor pid namespace if
it can see it's target but it's target does not have a pid for
the sender in it's pid namespace.
It is know that a signal is sent from the kernel if si_code is set to
SI_KERNEL or info is SEND_SIG_PRIV (which ultimately generates
a signal with si_code == SI_KERNEL).
The only signals that matter are SIGKILL and SIGSTOP neither of
which can really be caught, and both of which always have a siginfo
layout that includes si_uid and si_pid. Therefore we never need
to worry about forcing a signal when si_pid and si_uid are absent.
So handle the two special cases of info and the case when si_pid and
si_uid are present.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Any time siginfo is not stored in the signal queue information is
lost. Therefore set TRACE_SIGNAL_LOSE_INFO every time the code does
not allocate a signal queue entry, and a queue overflow abort is not
triggered.
Fixes: ba005e1f41 ("tracepoint: Add signal loss events")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
As synchronous exceptions really only make sense against the current
task (otherwise how are you synchronous) remove the task parameter
from from force_sig_fault to make it explicit that is what is going
on.
The two known exceptions that deliver a synchronous exception to a
stopped ptraced task have already been changed to
force_sig_fault_to_task.
The callers have been changed with the following emacs regular expression
(with obvious variations on the architectures that take more arguments)
to avoid typos:
force_sig_fault[(]\([^,]+\)[,]\([^,]+\)[,]\([^,]+\)[,]\W+current[)]
->
force_sig_fault(\1,\2,\3)
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
In preparation for removing the task parameter from force_sig_fault
introduce force_sig_fault_to_task and use it for the two cases where
it matters.
On mips force_fcr31_sig calls force_sig_fault and is called on either
the current task, or a task that is suspended and is being switched to
by the scheduler. This is safe because the task being switched to by
the scheduler is guaranteed to be suspended. This ensures that
task->sighand is stable while the signal is delivered to it.
On parisc user_enable_single_step calls force_sig_fault and is in turn
called by ptrace_request. The function ptrace_request always calls
user_enable_single_step on a child that is stopped for tracing. The
child being traced and not reaped ensures that child->sighand is not
NULL, and that the child will not change child->sighand.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
All of the callers pass current into force_sig_mceer so remove the
task parameter to make this obvious.
This also makes it clear that force_sig_mceerr passes current
into force_sig_info.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
All of the remaining callers pass current into force_sig so
remove the task parameter to make this obvious and to make
misuse more difficult in the future.
This also makes it clear force_sig passes current into force_sig_info.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
The function force_sigsegv is always called on the current task
so passing in current is redundant and not passing in current
makes this fact obvious.
This also makes it clear force_sigsegv always calls force_sig
on the current task.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
The function send_signal was split from __send_signal so that it would
be possible to bypass the namespace logic based upon current[1]. As it
turns out the si_pid and the si_uid fixup are both inappropriate in
the case of kill_pid_usb_asyncio so move that logic into send_signal.
It is difficult to arrange but possible for a signal with an si_code
of SI_TIMER or SI_SIGIO to be sent across namespace boundaries. In
which case tests for when it is ok to change si_pid and si_uid based
on SI_FROMUSER are incorrect. Replace the use of SI_FROMUSER with a
new test has_si_pid_and_used based on siginfo_layout.
Now that the uid fixup is no longer present after expanding
SEND_SIG_NOINFO properly calculate the si_uid that the target
task needs to read.
[1] 7978b567d3 ("signals: add from_ancestor_ns parameter to send_signal()")
Cc: stable@vger.kernel.org
Fixes: 6588c1e3ff ("signals: SI_USER: Masquerade si_pid when crossing pid ns boundary")
Fixes: 6b550f9495 ("user namespace: make signal.c respect user namespaces")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
The usb support for asyncio encoded one of it's values in the wrong
field. It should have used si_value but instead used si_addr which is
not present in the _rt union member of struct siginfo.
The practical result of this is that on a 64bit big endian kernel
when delivering a signal to a 32bit process the si_addr field
is set to NULL, instead of the expected pointer value.
This issue can not be fixed in copy_siginfo_to_user32 as the usb
usage of the the _sigfault (aka si_addr) member of the siginfo
union when SI_ASYNCIO is set is incompatible with the POSIX and
glibc usage of the _rt member of the siginfo union.
Therefore replace kill_pid_info_as_cred with kill_pid_usb_asyncio a
dedicated function for this one specific case. There are no other
users of kill_pid_info_as_cred so this specialization should have no
impact on the amount of code in the kernel. Have kill_pid_usb_asyncio
take instead of a siginfo_t which is difficult and error prone, 3
arguments, a signal number, an errno value, and an address enconded as
a sigval_t. The encoding of the address as a sigval_t allows the
code that reads the userspace request for a signal to handle this
compat issue along with all of the other compat issues.
Add BUILD_BUG_ONs in kernel/signal.c to ensure that we can now place
the pointer value at the in si_pid (instead of si_addr). That is the
code now verifies that si_pid and si_addr always occur at the same
location. Further the code veries that for native structures a value
placed in si_pid and spilling into si_uid will appear in userspace in
si_addr (on a byte by byte copy of siginfo or a field by field copy of
siginfo). The code also verifies that for a 64bit kernel and a 32bit
userspace the 32bit pointer will fit in si_pid.
I have used the usbsig.c program below written by Alan Stern and
slightly tweaked by me to run on a big endian machine to verify the
issue exists (on sparc64) and to confirm the patch below fixes the issue.
/* usbsig.c -- test USB async signal delivery */
#define _GNU_SOURCE
#include <stdio.h>
#include <fcntl.h>
#include <signal.h>
#include <string.h>
#include <sys/ioctl.h>
#include <unistd.h>
#include <endian.h>
#include <linux/usb/ch9.h>
#include <linux/usbdevice_fs.h>
static struct usbdevfs_urb urb;
static struct usbdevfs_disconnectsignal ds;
static volatile sig_atomic_t done = 0;
void urb_handler(int sig, siginfo_t *info , void *ucontext)
{
printf("Got signal %d, signo %d errno %d code %d addr: %p urb: %p\n",
sig, info->si_signo, info->si_errno, info->si_code,
info->si_addr, &urb);
printf("%s\n", (info->si_addr == &urb) ? "Good" : "Bad");
}
void ds_handler(int sig, siginfo_t *info , void *ucontext)
{
printf("Got signal %d, signo %d errno %d code %d addr: %p ds: %p\n",
sig, info->si_signo, info->si_errno, info->si_code,
info->si_addr, &ds);
printf("%s\n", (info->si_addr == &ds) ? "Good" : "Bad");
done = 1;
}
int main(int argc, char **argv)
{
char *devfilename;
int fd;
int rc;
struct sigaction act;
struct usb_ctrlrequest *req;
void *ptr;
char buf[80];
if (argc != 2) {
fprintf(stderr, "Usage: usbsig device-file-name\n");
return 1;
}
devfilename = argv[1];
fd = open(devfilename, O_RDWR);
if (fd == -1) {
perror("Error opening device file");
return 1;
}
act.sa_sigaction = urb_handler;
sigemptyset(&act.sa_mask);
act.sa_flags = SA_SIGINFO;
rc = sigaction(SIGUSR1, &act, NULL);
if (rc == -1) {
perror("Error in sigaction");
return 1;
}
act.sa_sigaction = ds_handler;
sigemptyset(&act.sa_mask);
act.sa_flags = SA_SIGINFO;
rc = sigaction(SIGUSR2, &act, NULL);
if (rc == -1) {
perror("Error in sigaction");
return 1;
}
memset(&urb, 0, sizeof(urb));
urb.type = USBDEVFS_URB_TYPE_CONTROL;
urb.endpoint = USB_DIR_IN | 0;
urb.buffer = buf;
urb.buffer_length = sizeof(buf);
urb.signr = SIGUSR1;
req = (struct usb_ctrlrequest *) buf;
req->bRequestType = USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE;
req->bRequest = USB_REQ_GET_DESCRIPTOR;
req->wValue = htole16(USB_DT_DEVICE << 8);
req->wIndex = htole16(0);
req->wLength = htole16(sizeof(buf) - sizeof(*req));
rc = ioctl(fd, USBDEVFS_SUBMITURB, &urb);
if (rc == -1) {
perror("Error in SUBMITURB ioctl");
return 1;
}
rc = ioctl(fd, USBDEVFS_REAPURB, &ptr);
if (rc == -1) {
perror("Error in REAPURB ioctl");
return 1;
}
memset(&ds, 0, sizeof(ds));
ds.signr = SIGUSR2;
ds.context = &ds;
rc = ioctl(fd, USBDEVFS_DISCSIGNAL, &ds);
if (rc == -1) {
perror("Error in DISCSIGNAL ioctl");
return 1;
}
printf("Waiting for usb disconnect\n");
while (!done) {
sleep(1);
}
close(fd);
return 0;
}
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Oliver Neukum <oneukum@suse.com>
Fixes: v2.3.39
Cc: stable@vger.kernel.org
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
When a process signals the audit daemon (shutdown, rotate, resume,
reconfig) but syscall auditing is not enabled, we still want to know the
identity of the process sending the signal to the audit daemon.
Move audit_signal_info() out of syscall auditing to general auditing but
create a new function audit_signal_info_syscall() to take care of the
syscall dependent parts for when syscall auditing is enabled.
Please see the github kernel audit issue
https://github.com/linux-audit/audit-kernel/issues/111
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Add SPDX license identifiers to all files which:
- Have no license information of any form
- Have EXPORT_.*_SYMBOL_GPL inside which was used in the
initial scan/conversion to ignore the file
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alex Xu reported a regression in strace, caused by the introduction of
the cgroup v2 freezer. The regression can be reproduced by stracing
the following simple program:
#include <unistd.h>
int main() {
write(1, "a", 1);
return 0;
}
An attempt to run strace ./a.out leads to the infinite loop:
[ pre-main omitted ]
write(1, "a", 1) = ? ERESTARTSYS (To be restarted if SA_RESTART is set)
write(1, "a", 1) = ? ERESTARTSYS (To be restarted if SA_RESTART is set)
write(1, "a", 1) = ? ERESTARTSYS (To be restarted if SA_RESTART is set)
write(1, "a", 1) = ? ERESTARTSYS (To be restarted if SA_RESTART is set)
write(1, "a", 1) = ? ERESTARTSYS (To be restarted if SA_RESTART is set)
write(1, "a", 1) = ? ERESTARTSYS (To be restarted if SA_RESTART is set)
[ repeats forever ]
The problem occurs because the traced task leaves ptrace_stop()
(and the signal handling loop) with the frozen bit set. So let's
call cgroup_leave_frozen(true) unconditionally after sleeping
in ptrace_stop().
With this patch applied, strace works as expected:
[ pre-main omitted ]
write(1, "a", 1) = 1
exit_group(0) = ?
+++ exited with 0 +++
Reported-by: Alex Xu <alex_y_xu@yahoo.ca>
Fixes: 76f969e894 ("cgroup: cgroup v2 freezer")
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
There is a plan to build the kernel with -Wimplicit-fallthrough and this
place in the code produced a warning (W=1).
This commit remove the following warning:
kernel/signal.c:795:13: warning: this statement may fall through [-Wimplicit-fallthrough=]
Link: http://lkml.kernel.org/r/20190114203505.17875-1-malat@debian.org
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Acked-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull cgroup updates from Tejun Heo:
"This includes Roman's cgroup2 freezer implementation.
It's a separate machanism from cgroup1 freezer. Instead of blocking
user tasks in arbitrary uninterruptible sleeps, the new implementation
extends jobctl stop - frozen tasks are trapped in jobctl stop until
thawed and can be killed and ptraced. Lots of thanks to Oleg for
sheperding the effort.
Other than that, there are a few trivial changes"
* 'for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: never call do_group_exit() with task->frozen bit set
kernel: cgroup: fix misuse of %x
cgroup: get rid of cgroup_freezer_frozen_exit()
cgroup: prevent spurious transition into non-frozen state
cgroup: Remove unused cgrp variable
cgroup: document cgroup v2 freezer interface
cgroup: add tracing points for cgroup v2 freezer
cgroup: make TRACE_CGROUP_PATH irq-safe
kselftests: cgroup: add freezer controller self-tests
kselftests: cgroup: don't fail on cg_kill_all() error in cg_destroy()
cgroup: cgroup v2 freezer
cgroup: protect cgroup->nr_(dying_)descendants by css_set_lock
cgroup: implement __cgroup_task_count() helper
cgroup: rename freezer.c into legacy_freezer.c
cgroup: remove extra cgroup_migrate_finish() call
I've got two independent reports that cgroup_task_frozen() check
in cgroup_exit() has been triggered by lkp libhugetlbfs-test and
LTP ptrace01 tests.
For example:
[ 44.576072] WARNING: CPU: 1 PID: 3028 at kernel/cgroup/cgroup.c:5932 cgroup_exit+0x148/0x160
[ 44.577724] Modules linked in: crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel sr_mod cdrom
bochs_drm sg ttm ata_generic pata_acpi ppdev drm_kms_helper snd_pcm syscopyarea aesni_intel snd_timer
sysfillrect sysimgblt snd crypto_simd cryptd glue_helper soundcore fb_sys_fops joydev drm serio_raw pcspkr
ata_piix libata i2c_piix4 floppy parport_pc parport ip_tables
[ 44.583106] CPU: 1 PID: 3028 Comm: ptrace-write-hu Not tainted 5.1.0-rc3-00053-g9262503 #5
[ 44.584600] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
[ 44.586116] RIP: 0010:cgroup_exit+0x148/0x160
[ 44.587135] Code: 0f 84 50 ff ff ff 48 8b 85 c8 0c 00 00 48 8b 78 70 e8 ec 2e 00 00 e9 3b ff ff ff f0 ff 43 60
0f 88 72 21 89 00 e9 48 ff ff ff <0f> 0b e9 1b ff ff ff e8 3c 73 f4 ff 66 90 66 2e 0f 1f 84 00 00 00
[ 44.590113] RSP: 0018:ffffb25702dcfd30 EFLAGS: 00010002
[ 44.591167] RAX: ffff96a7fee32410 RBX: ffff96a7ff1d6000 RCX: dead000000000200
[ 44.592446] RDX: ffff96a7ff1d6080 RSI: ffff96a7fec75290 RDI: ffff96a7fec75290
[ 44.593715] RBP: ffff96a7fec745c0 R08: ffff96a7fec74658 R09: 0000000000000000
[ 44.594985] R10: 0000000000000000 R11: 0000000000000001 R12: ffff96a7fec75101
[ 44.596266] R13: ffff96a7fec745c0 R14: ffff96a7ff3bde30 R15: ffff96a7fec75130
[ 44.597550] FS: 0000000000000000(0000) GS:ffff96a7dd700000(0000) knlGS:0000000000000000
[ 44.598950] CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033
[ 44.600098] CR2: 00000000f7a00000 CR3: 000000000d20e000 CR4: 00000000000406e0
[ 44.601417] Call Trace:
[ 44.602777] do_exit+0x337/0xc40
[ 44.603677] do_group_exit+0x3a/0xa0
[ 44.604610] get_signal+0x12e/0x8d0
[ 44.605533] ? __switch_to_asm+0x40/0x70
[ 44.606503] do_signal+0x36/0x650
[ 44.607409] ? __switch_to_asm+0x40/0x70
[ 44.608383] ? __schedule+0x267/0x860
[ 44.609329] exit_to_usermode_loop+0x89/0xf0
[ 44.610349] do_fast_syscall_32+0x251/0x2e3
[ 44.611357] entry_SYSENTER_compat+0x7f/0x91
[ 44.612376] ---[ end trace e4ca5cfc4b7f7964 ]---
The problem is caused by the ptrace_signal() call in the for loop
in get_signal(). There is a cgroup_enter_frozen() call inside
ptrace_signal(), so after exit from ptrace_signal() the task->frozen
bit might be set. In this case do_group_exit() can be called with the
task->frozen bit set and trigger the warning. This is only place where
we can leave the loop with the task->frozen bit set and without
setting JOBCTL_TRAP_FREEZE and TIF_SIGPENDING.
To resolve this problem, let's move cgroup_leave_frozen(true) call to
just after the fatal label. If the task is going to die, the frozen
bit must be cleared no matter how we get into this point.
Reported-by: kernel test robot <rong.a.chen@intel.com>
Reported-by: Qian Cai <cai@lca.pw>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
-----BEGIN PGP SIGNATURE-----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=LH11
-----END PGP SIGNATURE-----
Merge tag 'pidfd-v5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull pidfd updates from Christian Brauner:
"This patchset makes it possible to retrieve pidfds at process creation
time by introducing the new flag CLONE_PIDFD to the clone() system
call. Linus originally suggested to implement this as a new flag to
clone() instead of making it a separate system call.
After a thorough review from Oleg CLONE_PIDFD returns pidfds in the
parent_tidptr argument. This means we can give back the associated pid
and the pidfd at the same time. Access to process metadata information
thus becomes rather trivial.
As has been agreed, CLONE_PIDFD creates file descriptors based on
anonymous inodes similar to the new mount api. They are made
unconditional by this patchset as they are now needed by core kernel
code (vfs, pidfd) even more than they already were before (timerfd,
signalfd, io_uring, epoll etc.). The core patchset is rather small.
The bulky looking changelist is caused by David's very simple changes
to Kconfig to make anon inodes unconditional.
A pidfd comes with additional information in fdinfo if the kernel
supports procfs. The fdinfo file contains the pid of the process in
the callers pid namespace in the same format as the procfs status
file, i.e. "Pid:\t%d".
To remove worries about missing metadata access this patchset comes
with a sample/test program that illustrates how a combination of
CLONE_PIDFD and pidfd_send_signal() can be used to gain race-free
access to process metadata through /proc/<pid>.
Further work based on this patchset has been done by Joel. His work
makes pidfds pollable. It finished too late for this merge window. I
would prefer to have it sitting in linux-next for a while and send it
for inclusion during the 5.3 merge window"
* tag 'pidfd-v5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
samples: show race-free pidfd metadata access
signal: support CLONE_PIDFD with pidfd_send_signal
clone: add CLONE_PIDFD
Make anon_inodes unconditional
Let pidfd_send_signal() use pidfds retrieved via CLONE_PIDFD. With this
patch pidfd_send_signal() becomes independent of procfs. This fullfils
the request made when we merged the pidfd_send_signal() patchset. The
pidfd_send_signal() syscall is now always available allowing for it to
be used by users without procfs mounted or even users without procfs
support compiled into the kernel.
Signed-off-by: Christian Brauner <christian@brauner.io>
Co-developed-by: Jann Horn <jannh@google.com>
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: David Howells <dhowells@redhat.com>
Cc: "Michael Kerrisk (man-pages)" <mtk.manpages@gmail.com>
Cc: Andy Lutomirsky <luto@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
If freezing of a cgroup races with waking of a task from
the frozen state (like waiting in vfork() or in do_signal_stop()),
a spurious transition of the cgroup state can happen.
The task enters cgroup_leave_frozen(true), the cgroup->nr_frozen_tasks
counter decrements, and the cgroup is switched to the unfrozen state.
To prevent it, let's reserve cgroup_leave_frozen(true) for
terminating processes and use cgroup_leave_frozen(false) otherwise.
To avoid busy-looping in the signal handling loop waiting
for JOBCTL_TRAP_FREEZE set from the cgroup freezing path,
let's do it explicitly in cgroup_leave_frozen(), if the task
is going to stay frozen.
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cgroup v1 implements the freezer controller, which provides an ability
to stop the workload in a cgroup and temporarily free up some
resources (cpu, io, network bandwidth and, potentially, memory)
for some other tasks. Cgroup v2 lacks this functionality.
This patch implements freezer for cgroup v2.
Cgroup v2 freezer tries to put tasks into a state similar to jobctl
stop. This means that tasks can be killed, ptraced (using
PTRACE_SEIZE*), and interrupted. It is possible to attach to
a frozen task, get some information (e.g. read registers) and detach.
It's also possible to migrate a frozen tasks to another cgroup.
This differs cgroup v2 freezer from cgroup v1 freezer, which mostly
tried to imitate the system-wide freezer. However uninterruptible
sleep is fine when all tasks are going to be frozen (hibernation case),
it's not the acceptable state for some subset of the system.
Cgroup v2 freezer is not supporting freezing kthreads.
If a non-root cgroup contains kthread, the cgroup still can be frozen,
but the kthread will remain running, the cgroup will be shown
as non-frozen, and the notification will not be delivered.
* PTRACE_ATTACH is not working because non-fatal signal delivery
is blocked in frozen state.
There are some interface differences between cgroup v1 and cgroup v2
freezer too, which are required to conform the cgroup v2 interface
design principles:
1) There is no separate controller, which has to be turned on:
the functionality is always available and is represented by
cgroup.freeze and cgroup.events cgroup control files.
2) The desired state is defined by the cgroup.freeze control file.
Any hierarchical configuration is allowed.
3) The interface is asynchronous. The actual state is available
using cgroup.events control file ("frozen" field). There are no
dedicated transitional states.
4) It's allowed to make any changes with the cgroup hierarchy
(create new cgroups, remove old cgroups, move tasks between cgroups)
no matter if some cgroups are frozen.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
No-objection-from-me-by: Oleg Nesterov <oleg@redhat.com>
Cc: kernel-team@fb.com
Gustavo A. R. Silva