It does nothing, because the corresponding bit s not flipped on in .formats
and the audio SRAM DMA engine is not able to handle 20-bit transfers
anyway.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20200511210134.1224532-3-lkundrak@v3.sk
Signed-off-by: Mark Brown <broonie@kernel.org>
In order to fix issue described in:
"ASoC: Intel: sst: ipc command timeout"
https://patchwork.kernel.org/patch/11482829/
use readq function, which is meant to read 64 bit values from registers.
On 32 bit platforms it falls back to two readl calls.
Reported-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Tested-by: Brent Lu <brent.lu@intel.com>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20200507133405.32251-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Baytrail has 64 bit registers, so we should use *read64* to read from it
and then use proper mask values to check status.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Tested-by: Brent Lu <brent.lu@intel.com>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20200507133405.32251-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SSI BUSIF buffer is possible to overflow or underflow, especially in a
hypervisor environment. If there is no interrupt support, it will eventually
lead to errors in pcm data.
This patch adds overflow and underflow interrupt support for SSI BUSIF buffer.
Reported-by: Chen Li <licheng0822@thundersoft.com>
Signed-off-by: Yongbo Zhang <giraffesnn123@gmail.com>
Tested-by: Chen Li <licheng0822@thundersoft.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20200512093003.28332-1-giraffesnn123@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASUS ZenBook UX431DA requires an additional COEF setup when booted
from the recent Windows 10, otherwise it produces the noisy output.
The quirk turns on COEF 0x1b bit 10 that has been cleared supposedly
due to the pop noise reduction.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207553
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200512073203.14091-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The ASUS UX581LV laptop's audio (1043:19e1) with ALC295 can't detect the
headset microphone until ALC295_FIXUP_ASUS_MIC_NO_PRESENCE quirk
applied.
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Link: https://lore.kernel.org/r/20200512061525.133985-3-jian-hong@endlessm.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The ASUS laptop UX550GE with ALC295 can't detect the headset microphone
until ALC295_FIXUP_ASUS_MIC_NO_PRESENCE quirk applied.
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Link: https://lore.kernel.org/r/20200512061525.133985-2-jian-hong@endlessm.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The ASUS laptop GL503VM with ALC295 can't detect the headset microphone.
The headset microphone does not work until pin 0x19 is enabled for it.
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Link: https://lore.kernel.org/r/20200512061525.133985-1-jian-hong@endlessm.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix to return negative error code -ENOMEM from the IPC init error
handling case instead of 0, as done elsewhere in this function.
Fixes: c16211d622 ("ASoC: SOF: Add Sound Open Firmware driver core")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20200509093337.78897-1-weiyongjun1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This is trivial commit but fulfill missing entries in Kconfig for devices
supported by ALSA firewire-motu driver.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200511022540.161363-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fireface UFX was shipped by RME GmbH in 2010, and now discontinued.
Although this model has some enhanced feature which Fireface 802
doesn't have (e.g. on-board USB mass storage device class, configuration
interface with color display), the functionality relevant to
packet communication on IEEE 1394 bus seems to be the same as
Fireface 802 (e.g. available number of channels for PCM frame in
each sampling transfer frequency).
With the assumption, this commit adds support for Fireface UFX. In ALSA
fireface driver, these two models are handled as the same one.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200510074301.116224-7-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fireface 802 was shipped by RME GmbH in 2014. This model supports later
protocol for management of isochronous communication and synchronization
of sampling transmission frequency.
This model consists of below ICs:
* TI TSB41AB2
* Xilinx Spartan-6 FPGA XC6SLX16
* TI TMS320 C6747
* SMSC USB3250
Especially, this model just supports IEEE 1394a, against its name which
evokes Fireface 800.
This commit adds support for Fireface 802 (tested). Userspace applications
can transfer PCM frames and MIDI messages via ALSA PCM/Rawmidi interface.
I note that 4 channels for ADAt1 and ADAT2 are disabled at higher sampling
transfer frequency since isochronous resources reservation fails due to
bandwidth limitation of IEEE 1394a.
The value read from LATTER_SYNC_STATUS register is slightly different
from the one of Fireface UCX. The higher 4 bits and lower 4 bits are
swapped within the same byte.
Without any assist of userspace application, transmitted MIDI messages
from the device are not going to be processed. For detail, please refer
to my comment in code of latter protocol.
$ python crpp < /sys/bus/firewire/devices/fw1/config_rom
ROM header and bus information block
-----------------------------------------------------------------
400 0404ffff bus_info_length 4, crc_length 4, crc 65535 (should be 26805)
404 31333934 bus_name "1394"
408 20008000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 8 (512)
40c 000a3504 company_id 000a35 |
410 38077423 device_id 0438077423 | EUI-64 000a350438077423
root directory
-----------------------------------------------------------------
414 0005ffff directory_length 5, crc 65535 (should be 9514)
418 0c0083c0 node capabilities per IEEE 1394
41c 03000a35 vendor
420 8100000b --> descriptor leaf at 44c
424 8d000007 --> eui-64 leaf at 440
428 d1000001 --> unit directory at 42c
unit directory at 42c
-----------------------------------------------------------------
42c 0004ffff directory_length 4, crc 65535 (should be 45134)
430 12000a35 specifier id
434 13000005 version
438 17101800 model
43c 81000008 --> descriptor leaf at 45c
eui-64 leaf at 440
-----------------------------------------------------------------
440 0002ffff leaf_length 2, crc 65535 (should be 60131)
444 000a3504 company_id 000a35 |
448 38077423 device_id 0438077423 | EUI-64 000a350438077423
descriptor leaf at 44c
-----------------------------------------------------------------
44c 0003ffff leaf_length 3, crc 65535 (should be 469)
450 00000000 textual descriptor
454 00000000 minimal ASCII
458 524d4521 "RME!"
descriptor leaf at 45c
-----------------------------------------------------------------
45c 0005ffff leaf_length 5, crc 65535 (should be 10561)
460 00000000 textual descriptor
464 00000000 minimal ASCII
468 46697265 "Fire"
46c 66616365 "face"
470 20383032 " 802"
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200510074301.116224-6-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In RME fireface series, version field of unit directory in configuration
ROM is used to distinguish each model. The value of field is known and
it's better to use enumeration constants for code representation.
This commit adds enumeration constants for model identification.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200510074301.116224-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In the latter models of RME Fireface series, device start to transfer
packets several dozens of milliseconds. On the other hand, ALSA fireface
driver starts IR context 2 milliseconds after the start. This results
in loss to handle incoming packets on the context.
This commit changes to start IR context immediately instead of
postponement. For Fireface 800, this affects nothing because the device
transfer packets 100 milliseconds or so after the start and this is
within wait timeout.
Cc: <stable@vger.kernel.org>
Fixes: acfedcbe1c ("ALSA: firewire-lib: postpone to start IR context")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200510074301.116224-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
128000 and 192000 are congruence modulo 32000, thus it's wrong to
distinguish them as multiple of 32000 and 48000 by modulo 32000 at
first.
Additionally, used condition statement to detect quadruple speed can
cause missing bit flag.
Furthermore, counter to ensure the configuration is wrong and it
causes false positive.
This commit fixes the above three bugs.
Cc: <stable@vger.kernel.org>
Fixes: 60aec494b3 ("ALSA: fireface: support allocate_resources operation in latter protocol")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200510074301.116224-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The wov_hotword_model_put() function has multiple large variables on
its stack, the largest of which is the result of SHASH_DESC_ON_STACK().
In total, this exceeds the warning limit for 32-bit architectures:
sound/soc/codecs/cros_ec_codec.c:776:12: error: stack frame size of 1152 bytes in function 'wov_hotword_model_put' [-Werror,-Wframe-larger-than=]
The function already has a dynamic crypto_alloc_shash() allocation, so
using kmalloc() for the descriptor is correct as well and does not
introduce any additional failure scenarios. With this, the stack usage
of wov_hotword_model_put() gets reduced to 480 bytes in my test
configuration.
Fixes: b6bc07d436 ("ASoC: cros_ec_codec: support WoV")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200507213405.1869430-1-arnd@arndb.de
Signed-off-by: Mark Brown <broonie@kernel.org>
When CONFIG_SND_SOC_SOF_BAYTRAIL is not set, gcc warns:
sound/soc/sof/intel/byt.c:85:41: warning: ‘cht_debugfs’ defined but not used [-Wunused-const-variable=]
static const struct snd_sof_debugfs_map cht_debugfs[] = {
^~~~~~~~~~~
Move the variable inside #ifdef
Reported-by: Hulk Robot <hulkci@huawei.com>
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20200507072735.16588-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In previous commit, the sequence of syt offset and the number of data
blocks per packet is calculated for pool in AMDTP domain structure in
advance of processing outgoing packets.
This commit uses the sequence for outgoing packet processing to obsolete
per-stream processing of the sequence.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200508043635.349339-11-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In current implementation, sequence of syt offset and the number of data
blocks is generated when packets for outgoing stream are going to be
queued.
This commit generates and pools the sequence independently of the
processing of outgoing packets for future extension.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200508043635.349339-10-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For future extension, storage is required to store packet sequence in
incoming AMDTP stream to recover media clock for outgoing AMDTP stream.
This commit adds the storage to AMDTP domain for this purpose. The
packet sequence is represented by 'struct seq_desc' which has two
members; syt_offset and the number of data blocks. The size of storage
is decided according to the size of packet queue.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200508043635.349339-9-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When calculating the number of data blocks per packet, some states are
stored in AMDTP stream structure. This is inconvenient when reuse the
calculation from non-stream structure.
This commit applies refactoring to helper function for the calculation
so that the function doesn't touch AMDTP stream structure.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200508043635.349339-8-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When calculating syt offset, some states are stored in AMDTP stream
structure. This is inconvenient when reuse the calculation from
non-stream structure.
This commit applies refactoring to helper function for the calculation
so that the function doesn't touch AMDTP stream structure.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200508043635.349339-7-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In current implementation for outgoing AMDTP packet, the value of syt
field in CIP header is computed when calculating syt offset. For
future extension, it's convenient to split the computation and
calculation.
This commit splits them.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200508043635.349339-6-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Although the parameter for packet queue and IRQ timing is calculated when
AMDTP stream starts, the calculated parameters are the same between
streams in AMDTP domain.
This commit moves the calculation and decide the parameters when AMDTP
domain starts.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200508043635.349339-5-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In current implementation, AMDTP domain structure and AMDTP stream
structure has one way of reference from the former to the latter. For
future extension, bidirectional reference is needed.
This commit adds a member into stream structure to refer to domain
structure to which the stream belongs.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200508043635.349339-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In descriptor of isochronous context in 1394 OHCI, the field of second
has 3 bit, thus the maximum value is 8. The value is used for correct
cycle calculation.
This commit replaces hard-coded value with macro to obsolete magic
number.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200508043635.349339-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Although the value of FDF is used just for outgoing stream, the assignment
to union member is done for both directions of stream. At present this
causes no issue because the value of same position is reassigned later for
opposite stream. However, it's better to add if statement.
Fixes: d3d10a4a1b ("ALSA: firewire-lib: use union for directional parameters")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200508043635.349339-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200507185245.GA14270@embeddedor
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20200507192223.GA16335@embeddedor
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The rawmidi core allows user to resize the runtime buffer via ioctl,
and this may lead to UAF when performed during concurrent reads or
writes: the read/write functions unlock the runtime lock temporarily
during copying form/to user-space, and that's the race window.
This patch fixes the hole by introducing a reference counter for the
runtime buffer read/write access and returns -EBUSY error when the
resize is performed concurrently against read/write.
Note that the ref count field is a simple integer instead of
refcount_t here, since the all contexts accessing the buffer is
basically protected with a spinlock, hence we need no expensive atomic
ops. Also, note that this busy check is needed only against read /
write functions, and not in receive/transmit callbacks; the race can
happen only at the spinlock hole mentioned in the above, while the
whole function is protected for receive / transmit callbacks.
Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/CAFcO6XMWpUVK_yzzCpp8_XP7+=oUpQvuBeCbMffEDkpe8jWrfg@mail.gmail.com
Link: https://lore.kernel.org/r/s5heerw3r5z.wl-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix the following warning:
sound/soc/fsl/fsl_asrc.c:157:5: warning:
symbol 'fsl_asrc_request_pair' was not declared. Should it be static?
sound/soc/fsl/fsl_asrc.c:200:6: warning:
symbol 'fsl_asrc_release_pair' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: ChenTao <chentao107@huawei.com>
Link: https://lore.kernel.org/r/20200507022959.183739-1-chentao107@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Update intel-dspcfg with FLAG_SST_ONLY_IF_DMIC option and use it for
Skylake and Kabylake platforms when DMIC is present.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200506203951.6369-1-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix the following coccinelle warning:
sound/drivers/portman2x4.c:460:34-35: WARNING: sum of probable bitmasks, consider |
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Samuel Zou <zou_wei@huawei.com>
Link: https://lore.kernel.org/r/1588834135-14842-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix the following coccinelle warnings:
sound/ppc/pmac.c:729:57-58: WARNING: sum of probable bitmasks, consider |
sound/ppc/pmac.c:229:37-38: WARNING: sum of probable bitmasks, consider |
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Samuel Zou <zou_wei@huawei.com>
Link: https://lore.kernel.org/r/1588823647-12480-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If the function platform_get_irq() failed, the negative value
returned will not be detected here. So fix error handling in
mt6797_afe_pcm_dev_probe(). And when get irq failed, the function
platform_get_irq() logs an error message, so remove redundant
message here.
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20200506143009.13368-1-tangbin@cmss.chinamobile.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Simultaneous capture on dmic and headset mic is having
issue with high hw_level being reported.
Issue Can be reproduced by:
arecord -D hw:2,0 -f dat -d 60 /tmp/test0 &
arecord -D hw:2,2 -f dat -d 60 /tmp/test1 &
cat /proc/asound/card2/pcm?c/sub0/status
Actual issue is :
When we open one capture stream on one instance lets say I2S_SP and then
once again if we open other capture on other instance lets say I2S_BT while
first capture is in progress and when we try to read the status of both
running instances by below command cat /proc/asound/card2/pcm?c/sub0/status
we observe that avail_max is being doubled on first opened
capture(I2S_SP in the example).
This is because our previous implementation was like when any instance is
opened it gets initialized in dma_open irrespective of on what instance it
called open.
For example:
First I2S_SP called opened it initializes both SP/BT capture streams
irrespective of on which instance the stream opened.next time I2S_BT
called opened and it initializes both SP/BT this corrupts the behaviour .
So with this patch the stream gets initialized only on specific instance
when ever it gets opened calls hw_params.
This rectifies the issue.
Signed-off-by: Ravulapati Vishnu vardhan rao <Vishnuvardhanrao.Ravulapati@amd.com>
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Link: https://lore.kernel.org/r/20200506102602.140790-1-akshu.agrawal@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The LPASS hardware allows configuring the MI2S SD lines to use
when playing/recording audio. However, at the moment the lpass-cpu
driver has SD0 hard-coded for mono/stereo (or additional fixed
SD lines for more channels).
For weird reasons there seems to be hardware that uses one of the
other SD lines for mono/stereo. For example, some Samsung devices
use an external Speaker amplifier connected to Quaternary MI2S.
For some reason, the SD line for audio playback was connected to
SD1 rather than SD0. (I have no idea why...)
At the moment, the lpass-cpu driver cannot be configured to work
for the Speaker on these devices.
The q6afe driver already allows configuring the MI2S SD lines
through the "qcom,sd-lines" device tree property, but this works
only when routing audio through the ADSP.
This commit adds a very similar configuration for the lpass-cpu driver.
It is now possible to add additional subnodes to the lpass device in
the device tree, to configure the SD lines for playback and/or capture.
E.g. for the Samsung devices mentioned above:
&lpass {
dai@3 {
reg = <MI2S_QUATERNARY>;
qcom,playback-sd-lines = <1>;
};
};
qcom,playback/capture-sd-lines takes a list of SD lines (0-3)
in the same format as the q6afe driver. (The difference here is that
q6afe has separate DAIs for playback/capture, while lpass-cpu has one
for both...)
For backwards compatibility with older device trees, the lpass-cpu driver
defaults to LPAIF_I2SCTL_MODE_8CH if the subnode for a DAI is missing.
This is equivalent to the previous behavior: Up to 8 channels can be
configured, and SD0/QUAT01 will be chosen when setting up a stream
with fewer channels.
This allows the speaker to work on Samsung MSM8916 devices
that use an external speaker amplifier.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200425184657.121991-2-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
During S3 test, the following error was observed:
[ 726.174237] i2c_designware i2c_designware.0: platform_pm_resume+0x0/0x3d returned 0 after 0 usecs
[ 726.184187] max98373 i2c-MX98373:00: calling max98373_resume+0x0/0x30 [snd_soc_max98373] @ 12698, parent: i2c-11
[ 726.195589] max98373 i2c-MX98373:00: Reset command failed. (ret:-16)
When calling regmap_update_bits(), since map->reg_update_bits is NULL,
_regmap_read() is entered with the following logic:
if (!map->cache_bypass) {
ret = regcache_read(map, reg, val);
if (ret == 0)
return 0;
}
if (map->cache_only)
return -EBUSY;
regcache_read() hits -EINVAL because MAX98373_R2000_SW_RESET is volatile,
as map->cache_only is set by codec suspend, thus -EBUSY is returned.
Fix by moving max98373_reset() after cache_only set to false in max98373_resume().
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Link: https://lore.kernel.org/r/1588376661-29799-1-git-send-email-yong.zhi@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Tegra194 has 4 SDO lines and with this configuration playback fails
for 44.1K/48K, 2-channel and 16-bps. It results in below print,
"aplay: pcm_write:2011: write error: Input/output error"
Below relation is used to derive stripe control and is referenced
from HD Audio Specification: Revision 1.0a.
{ ((num_channels * bits_per_sample) / number of SDOs) >= 8 }
Due to a legacy HW design problem, playback issue is hit while using
a stripe value resulting from above formula when ratio is '8'. Thus
it is recommended that the ratio must be greater than '8'. Since the
number of SDO lines is in powers of 2, next available ratio '16' is
used as a limiting factor on Tegra194 to workaround the problem.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1588580176-2801-4-git-send-email-spujar@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stripe control programming is governed by following formula, which is
referenced from the HD Audio specification(Revision 1.0a).
{ ((num_channels * bits_per_sample) / number of SDOs) >= 8 }
Currently above is implemented in snd_hdac_get_stream_stripe_ctl().
This patch introduces a structure member to store the default factor
of '8'. If any HW wants to use a different value, this member can be
easily updated.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1588580176-2801-3-git-send-email-spujar@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tegra194 supports 4 SDO lines but GCAP register indicates 2 lines. Thus it
does not reflect the true capability of the HW. This patch presents a
workaround by updating NSDO value accordingly in T_AZA_DBG_CFG_2 register.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1588580176-2801-2-git-send-email-spujar@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is another TRX40 based motherboard with ALC1220-VB USB-audio
that requires a static mapping table.
This motherboard also has a PCI device which advertises no codecs. The
PCI ID is 1022:1487 and PCI SSID is 1022:d102. As this is using the AMD
vendor ID, don't blacklist for now in case other boards have a working
audio device with the same ssid.
alsa-info.sh report for this board:
http://alsa-project.org/db/?f=0a742f89066527497b77ce16bca486daccf8a70c
Signed-off-by: Andrew Oakley <andrew@adoakley.name>
Link: https://lore.kernel.org/r/20200503141639.35519-1-andrew@adoakley.name
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit 317d931392 ("ALSA: hda/realtek - Set default power save node to
0") makes the ALC225 have pop noise on S3 resume and cold boot.
The previous fix enable power save node universally for ALC225, however
it makes some ALC225 systems unable to produce any sound.
So let's only enable power save node for the affected Dell Wyse
platform.
Fixes: 317d931392 ("ALSA: hda/realtek - Set default power save node to 0")
BugLink: https://bugs.launchpad.net/bugs/1866357
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20200503152449.22761-2-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The snd-firewire-lib.ko has 'amdtp-packet' event of tracepoints. Current
printk format for the event includes 'sizeof(u8)' macro expected to be
extended in compilation time. However, this is not done. As a result,
perf tools cannot parse the event for printing:
$ mount -l -t debugfs
debugfs on /sys/kernel/debug type debugfs (rw,nosuid,nodev,noexec,relatime)
$ cat /sys/kernel/debug/tracing/events/snd_firewire_lib/amdtp_packet/format
...
print fmt: "%02u %04u %04x %04x %02d %03u %02u %03u %02u %01u %02u %s",
REC->second, REC->cycle, REC->src, REC->dest, REC->channel,
REC->payload_quadlets, REC->data_blocks, REC->data_block_counter,
REC->packet_index, REC->irq, REC->index,
__print_array(__get_dynamic_array(cip_header),
__get_dynamic_array_len(cip_header),
sizeof(u8))
$ sudo perf record -e snd_firewire_lib:amdtp_packet
[snd_firewire_lib:amdtp_packet] function sizeof not defined
Error: expected type 5 but read 0
This commit fixes it by obsoleting the macro with actual size.
Cc: <stable@vger.kernel.org>
Fixes: bde2bbdb30 ("ALSA: firewire-lib: use dynamic array for CIP header of tracing events")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200503045718.86337-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
At least POD HD500 uses message-based communication, both sides can
send messages. Add poll callback so application can wait for device
messages without using busy loop.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Link: https://lore.kernel.org/r/20200502193120.79115-3-anarsoul@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently line6 hwdep interface ignores O_NONBLOCK flag when
opening device and it renders it somewhat useless when using poll.
Check for O_NONBLOCK flag when opening device and don't block read()
if it is set.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Link: https://lore.kernel.org/r/20200502193120.79115-2-anarsoul@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Just a collection of small fixes around this time.
- One more try for fixing PCM OSS regression
- HD-audio: a new quirk for Lenovo, the improved driver blacklisting,
a lock fix in the minor error path, and a fix for the possible race
at monitor notifiaction
- USB-audio: a quirk ID fix, a fix for POD HD500 workaround
-----BEGIN PGP SIGNATURE-----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=ePLE
-----END PGP SIGNATURE-----
Merge tag 'sound-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Just a collection of small fixes around this time:
- One more try for fixing PCM OSS regression
- HD-audio: a new quirk for Lenovo, the improved driver blacklisting,
a lock fix in the minor error path, and a fix for the possible race
at monitor notifiaction
- USB-audio: a quirk ID fix, a fix for POD HD500 workaround"
* tag 'sound-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: usb-audio: Correct a typo of NuPrime DAC-10 USB ID
ALSA: opti9xx: shut up gcc-10 range warning
ALSA: hda/hdmi: fix without unlocked before return
ALSA: hda/hdmi: fix race in monitor detection during probe
ALSA: hda/realtek - Two front mics on a Lenovo ThinkCenter
ALSA: line6: Fix POD HD500 audio playback
ALSA: pcm: oss: Place the plugin buffer overflow checks correctly (for 5.7)
ALSA: pcm: oss: Place the plugin buffer overflow checks correctly
ALSA: hda: Match both PCI ID and SSID for driver blacklist
Remove the ambiguity with GPL-2.0 and use an explicit GPL-2.0-only
tag.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200501145850.15178-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new machine driver to interface with WM8804. The code is based
on settings found in sound/soc/bcm/hifiberry-digi.c in the Raspberry
PI tree.
Tested on Up2 with Digi+ IO (capture+playback) and Digi+ PRO (playback
with two local oscillators supported). The codec is clock master in
both cases.
Capture support has known clocking restrictions: the transmitter needs
to be active for the clock recovery, the "Tx Source" mixer set to
"S/PDIF RX". Playback will only work while capture is active.
When Capture is not desired, or when there is no RX connector, the "Tx
Source" mixer should be set to "AIF"
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200501151625.17820-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
At the first time update_mute_led() gets called, if channels are already
muted, the temp value equals to led_value as 0, skipping the following
LED setting.
So set led_value to -1 as an uninitialized state, to update the correct
LED status at first time usage.
Fixes: 5d43001ae4 ("ASoC: SOF: acpi led support for switch controls")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Acked-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200430091139.7003-1-kai.heng.feng@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The "header->number" comes from the ioctl and it needs to be clamped to
prevent out of bounds writes.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20200501094011.GA960082@mwanda
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cover with a proper ifdef around the variable declaration for fixing
the following compilation warning without CONFIG_LEDS_TRIGGER_AUDIO:
sound/pci/hda/patch_realtek.c: In function 'alc_fixup_hp_gpio_led':
sound/pci/hda/patch_realtek.c:4134:6: warning: unused variable 'err' [-Wunused-variable]
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 87dc36482c ("ALSA: hda/realtek - Add LED class support for micmute LED")
Link: https://lore.kernel.org/r/20200501072857.13720-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently DMIC controls micmute LED via "audio mute LED trigger".
However, unlike Dell and Lenovo platforms, HP platforms don't provide a
way to control micmute LED via ACPI, it's controlled by HDA codec
instead.
So let's register an LED class for micmute so other subsystems like DMIC
can facilitate the codec-controlled LED.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20200430135209.14703-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Though the system uses DMIC, headset mic still uses the HDA, let's use
GPIO 0x1 to control the micmute LED.
The micmute LED GPIO has a different polarity to the mute LED GPIO, we
can use the newly added micmute_led_polarity to indicate that.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20200430083255.5093-2-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently mute LED and micmute LED share the same GPIO polarity.
So split the polarity for mute and micmute, in case they have different
polarities.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20200430083255.5093-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The series tries to refactor the coding style to follow most conventions.
The 4th patch converts pr_() to dev_().
(https://mailman.alsa-project.org/pipermail/alsa-devel/2020-March/164849.html)
The 6th patch changes the behavior a bit to restore its original intent.
Tzung-Bi Shih (6):
ASoC: rt5682: simplify assertions
ASoC: rt5682: fix space issues
ASoC: rt5682: remove empty default case
ASoC: rt5682: replace message printing from pr_() to dev_()
ASoC: rt5682: remove duplicate rt5682_reset() calls
ASoC: rt5682: remove unwanted btn_type assignment
sound/soc/codecs/rt5682.c | 198 ++++++++++++++++----------------------
1 file changed, 84 insertions(+), 114 deletions(-)
--
2.26.2.303.gf8c07b1a785-goog
This series includes updates in the topology parser for DAIs
and their config.
The first three patches address the problem of sending the DAI
config to the DSP when there are multiple DAIs associated with
a DAI link.
The last patch deals with setting the default trigger order
for all links. Exceptions needed for HDA links are moved to
the DAI link fixup() callback.
Bard Liao (3):
ASoC: SOF: topology: send ipc for all found DAIs in sof_set_dai_config
ASoC: topology: set component dai_index to ipc dai config dai_index
ASoC: SOF: topology: replace sof_link_hda_process by
sof_set_dai_config
randerwang (1):
ASoC: SOF: Intel: change trigger sequence to fix pop noise when
stopping playback on sdw platforms
sound/soc/sof/pcm.c | 12 ++-
sound/soc/sof/topology.c | 167 ++++++++++-----------------------------
2 files changed, 51 insertions(+), 128 deletions(-)
--
2.17.1
The imx8 config keeps causing issues:
WARNING: unmet direct dependencies detected for SND_SOC_SOF_IMX8M
Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=m] && SND_SOC_SOF_TOPLEVEL [=y] && SND_SOC_SOF_IMX_TOPLEVEL [=y] && IMX_DSP [=n]
Selected by [m]:
- SND_SOC_SOF_IMX_OF [=m] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=m] && SND_SOC_SOF_TOPLEVEL [=y] && SND_SOC_SOF_IMX_TOPLEVEL [=y] && SND_SOC_SOF_IMX8M_SUPPORT [=y]
This is complicated by two drivers having dependencies on both
platform specific drivers and the SND_SOC_SOF_OF framework code,
and using an somewhat obscure method to build them the same way
as the SOC_SOF_OF symbol (built-in or modular).
My solution now ensures that the two drivers can only be enabled
when the dependencies are met:
- When the platform specific drivers are built-in, everything is
fine, as SOC_SOF_OF is either =y or =m
- When both are loadable modules, it also works, both for Kconfig
and at runtime
- When the hardware drivers are loadable modules or disabled, and
SOC_SOF_OF=y, prevent the IMX_SOF_OF drivers from being turned on,
as this would be broken.
It seems that this is just an elaborate way to describe two tristate
symbols that have straight dependencies, but maybe I'm missing some
subtle point. It seems to always build for me now.
Fixes: fe57a92c88 ("ASoC: SOF: Add missing dependency on IMX_SCU")
Fixes: afb93d7165 ("ASoC: SOF: imx: Add i.MX8M HW support")
Fixes: cb0312f61c ("ASoC: SOF: imx: fix undefined reference issue")
Fixes: afb93d7165 ("ASoC: SOF: imx: Add i.MX8M HW support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20200428212752.2901778-1-arnd@arndb.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The following dev_err() is intended to print unexpected btn_type.
Removes the unwanted btn_type assignment.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200430082231.151127-7-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now the trigger sequence is set to SND_SOC_DPCM_TRIGGER_POST for
SOF. This means FE will be stopped before BE, so BE will consume
invalid data and this generates huge pop noise. This sequence is
introduced for HDA DAI which requires SND_SOC_DPCM_TRIGGER_POST for
some reasons. Now set default trigger sequence to SND_SOC_DPCM_TRIGGER_PRE
for playback with all DAI and fix sequence only for HDA DAI.
Fully tested on Comet Lake for a few cycles.
Signed-off-by: randerwang <rander.wang@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Clarex Zhou <clarex.zhou@intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200427172939.25848-5-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now we send ipc in sof_set_dai_config(), too. Therefore, we can use
sof_set_dai_config() in sof_link_hda_load() just like other link load
functions do.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200427172939.25848-4-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ipc dai config dai_index is from topology. However, the same dai
config will be applied to all DAIs in the same dai link. We have to
ensure that the ipc dai config's dai_index match to the component's
dai_index.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200427172939.25848-3-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We may find more than one DAIs in sof_set_dai_config() and we should
send message to DSP for each DAI we found.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200427172939.25848-2-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When removing the SOF module, the RT286 jack detect
handler will oops if jack detection is not disabled.
Disable the jack in the machine driver remove callback
to prevent this. This fix is only for SOF support and is
not needed for earlier versions.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200427162953.21107-1-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
gcc-10 points out a few instances of suspicious integer arithmetic
leading to value truncation:
sound/isa/opti9xx/opti92x-ad1848.c: In function 'snd_opti9xx_configure':
sound/isa/opti9xx/opti92x-ad1848.c:322:43: error: overflow in conversion from 'int' to 'unsigned char' changes value from '(int)snd_opti9xx_read(chip, 3) & -256 | 240' to '240' [-Werror=overflow]
322 | (snd_opti9xx_read(chip, reg) & ~(mask)) | ((value) & (mask)))
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~
sound/isa/opti9xx/opti92x-ad1848.c:351:3: note: in expansion of macro 'snd_opti9xx_write_mask'
351 | snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(3), 0xf0, 0xff);
| ^~~~~~~~~~~~~~~~~~~~~~
sound/isa/opti9xx/miro.c: In function 'snd_miro_configure':
sound/isa/opti9xx/miro.c:873:40: error: overflow in conversion from 'int' to 'unsigned char' changes value from '(int)snd_miro_read(chip, 3) & -256 | 240' to '240' [-Werror=overflow]
873 | (snd_miro_read(chip, reg) & ~(mask)) | ((value) & (mask)))
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~
sound/isa/opti9xx/miro.c:1010:3: note: in expansion of macro 'snd_miro_write_mask'
1010 | snd_miro_write_mask(chip, OPTi9XX_MC_REG(3), 0xf0, 0xff);
| ^~~~~~~~~~~~~~~~~~~
These are all harmless here as only the low 8 bit are passed down
anyway. Change the macros to inline functions to make the code
more readable and also avoid the warning.
Strictly speaking those functions also need locking to make the
read/write pair atomic, but it seems unlikely that anyone would
still run into that issue.
Fixes: 1841f613fd ("[ALSA] Add snd-miro driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200429190216.85919-1-arnd@arndb.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If one of the two is a loadable module, the combined driver must
not be built-in:
aarch64-linux-ld: sound/soc/codecs/rt5682.o: in function `rt5682_sdw_hw_free':
rt5682.c:(.text+0xb34): undefined reference to `sdw_stream_remove_slave'
aarch64-linux-ld: sound/soc/codecs/rt5682.o: in function `rt5682_sdw_hw_params':
rt5682.c:(.text+0xe78): undefined reference to `sdw_stream_add_slave'
In particular, the soundwire driver must not be built-in if
CONFIG_I2C=m.
Fixes: 5549ea6479 ("ASoC: rt5682: fix unmet dependencies")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200428214642.3925004-1-arnd@arndb.de
Signed-off-by: Mark Brown <broonie@kernel.org>
ifdefs are hard, and in this driver the suspend/resume functions are
the only callers of some other helpers that trigger a harmless warning
when CONFIG_PM is disabled:
sound/soc/fsl/fsl_easrc.c:1807:12: warning: 'fsl_easrc_get_firmware' defined but not used [-Wunused-function]
1807 | static int fsl_easrc_get_firmware(struct fsl_asrc *easrc)
| ^~~~~~~~~~~~~~~~~~~~~~
sound/soc/fsl/fsl_easrc.c:303:12: warning: 'fsl_easrc_resampler_config' defined but not used [-Wunused-function]
303 | static int fsl_easrc_resampler_config(struct fsl_asrc *easrc)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
Remove the #ifdef and just mark the callers as __maybe_unused to
suppress the warnings altogether.
Fixes: 955ac62405 ("ASoC: fsl_easrc: Add EASRC ASoC CPU DAI drivers")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20200428212847.2926376-1-arnd@arndb.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Delete unused initialized value, because 'ret' will be assigined
by the function of_alias_get_id().
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20200429093823.1372-1-tangbin@cmss.chinamobile.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch implements the following features:
- AUX input for recording.
- An input AUX output to SPK/MOUT.
Signed-off-by: Seven Lee <wtli@nuvoton.com>
Link: https://lore.kernel.org/r/20200429090002.28556-1-wtli@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dai related function should be implemented at soc-dai.c.
This patch adds snd_soc_dai_compr_get_metadata().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87eesdssi8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dai related function should be implemented at soc-dai.c.
This patch adds snd_soc_dai_compr_set_metadata().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87ftctssid.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dai related function should be implemented at soc-dai.c.
This patch adds snd_soc_dai_compr_pointer().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87h7x9ssii.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dai related function should be implemented at soc-dai.c.
This patch adds snd_soc_dai_compr_ack().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87imhpssim.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dai related function should be implemented at soc-dai.c.
This patch adds snd_soc_dai_compr_get_params().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87k125ssir.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dai related function should be implemented at soc-dai.c.
This patch adds snd_soc_dai_compr_set_params().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87lfmlssiv.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dai related function should be implemented at soc-dai.c.
This patch adds snd_soc_dai_compr_trigger().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87mu71ssiz.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dai related function should be implemented at soc-dai.c.
This patch adds snd_soc_dai_compr_shutdown().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87o8rhssj3.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dai related function should be implemented at soc-dai.c.
This patch adds snd_soc_dai_compr_start().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87pnbxssj7.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have 2 type of component functions
snd_soc_dai_xxx() is focusing to dai itself,
snd_soc_pcm_dai_xxx() is focusing to rtd related dai.
Now we can update snd_soc_dai_remove() to
snd_soc_pcm_dai_remove(). This patch do it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87r1wdssjc.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have 2 type of component functions
snd_soc_dai_xxx() is focusing to dai itself,
snd_soc_pcm_dai_xxx() is focusing to rtd related dai.
Now we can update snd_soc_dai_probe() to
snd_soc_pcm_dai_probe(). This patch do it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87sggtssjg.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have 2 type of component functions
snd_soc_dai_xxx() is focusing to dai itself,
snd_soc_pcm_dai_xxx() is focusing to rtd related dai.
Now we can update soc_pcm_bespoke_trigger() to
snd_soc_pcm_dai_bespoke_trigger(). This patch do it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87tv19ssjm.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have 2 type of component functions
snd_soc_dai_xxx() is focusing to dai itself,
snd_soc_pcm_dai_xxx() is focusing to rtd related dai.
Now we can update snd_soc_dai_trigger() to
snd_soc_pcm_dai_trigger(). This patch do it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87v9lpssjr.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have 2 type of component functions
snd_soc_dai_xxx() is focusing to dai itself,
snd_soc_pcm_dai_xxx() is focusing to rtd related dai.
Now we can update snd_soc_dai_prepare() to
snd_soc_pcm_dai_prepare(). This patch do it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87wo65ssk2.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have 2 type of component functions
snd_soc_dai_xxx() is focusing to dai itself,
snd_soc_pcm_dai_xxx() is focusing to rtd related dai.
Now we can update soc_dai_pcm_new() to
snd_soc_pcm_dai_new(). This patch do it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87y2qlssk7.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ASoC overwrites null_dai_ops to dai->driver->ops if it
was NULL. But, we can remove it if framework always checks
dai->driver->ops when it uses DAI callbacks.
This patch do it, and removes null_dai_ops.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87zhb1sskc.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
At soc-dai.c, it is good idea to indicate error function and
its component name if there was error.
This patch adds soc_dai_err() for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/871rodu74x.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the following coccicheck warning:
sound/pci/hda/patch_hdmi.c:1852:2-8: preceding lock on line 1846
After add sanity check to pass klockwork check,
The spdif_mutex should be unlock before return true
in check_non_pcm_per_cvt().
Fixes: 960a581e22 ("ALSA: hda: fix some klockwork scan warnings")
Signed-off-by: Wu Bo <wubo40@huawei.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1587907042-694161-1-git-send-email-wubo40@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This series provides the following updtes to the Intel machine driver
Kconfig:
1. The first patch adds the explicit dependency on GPIOLIB when
SND_SOC_DMIC is selected.
2. SND_SOC_SOF_HDA_AUDIO_CODEC is required for using the legacy
HDA codec driver for HDMI support in SOF. The last 3 three patches
make the required changes to account for this.
Libin Yang (3):
ASoC: intel: add depends on SND_SOC_SOF_HDA_AUDIO_CODEC for common
hdmi
ASoC: sof-sdw: remove CONFIG_SND_SOC_SOF_HDA_AUDIO_CODEC condition
ASoC: sof_pcm512x: remove CONFIG_SND_HDA_CODEC_HDMI condition
Pierre-Louis Bossart (1):
ASoC: Intel: boards: add explicit dependency on GPIOLIB when DMIC is
used
sound/soc/intel/boards/Kconfig | 51 ++++++++++++++-------------
sound/soc/intel/boards/sof_pcm512x.c | 9 -----
sound/soc/intel/boards/sof_sdw.c | 8 -----
sound/soc/intel/boards/sof_sdw_hdmi.c | 7 ----
4 files changed, 26 insertions(+), 49 deletions(-)
--
2.17.1
The machine driver bdw-rt5650 (for Google buddy) supports 2 or 4-channel
recording while other two drivers support only 2-channel recording. HW
constraints are implemented to reflect the hardware limitation on BDW
platform.
Changes since v1:
- Change the patch title.
- Remove the DUAL_CHANNEL and QUAD_CHANNEL macros which are too obvious.
- Follow the naming convertion, using 'bdw_rt5650_' and 'bdw_rt5677_' to
name startup functions.
- Refine the comments in startup functions.
- Redesign the bdw_rt5650_fe_startup() function for readability.
- Add an assignment to initialize runtime->hw.channels_max variable.
Brent Lu (3):
ASoC: bdw-rt5677: add channel constraint
ASoC: bdw-rt5650: add channel constraint
ASoC: broadwell: add channel constraint
sound/soc/intel/boards/bdw-rt5650.c | 29 +++++++++++++++++++++++++++++
sound/soc/intel/boards/bdw-rt5677.c | 26 ++++++++++++++++++++++++++
sound/soc/intel/boards/broadwell.c | 26 ++++++++++++++++++++++++++
3 files changed, 81 insertions(+)
--
2.7.4
A race exists between build_pcms() and build_controls() phases of codec
setup. Build_pcms() sets up notifier for jack events. If a monitor event
is received before build_controls() is run, the initial jack state is
lost and never reported via mixer controls.
The problem can be hit at least with SOF as the controller driver. SOF
calls snd_hda_codec_build_controls() in its workqueue-based probe and
this can be delayed enough to hit the race condition.
Fix the issue by invalidating the per-pin ELD information when
build_controls() is called. The existing call to hdmi_present_sense()
will update the ELD contents. This ensures initial monitor state is
correctly reflected via mixer controls.
BugLink: https://github.com/thesofproject/linux/issues/1687
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200428123836.24512-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
BDW boards using this machine driver supports only stereo capture and
playback. Implement a constraint to enforce it.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/1588007614-25061-4-git-send-email-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
BDW boards using this machine driver supports only 2 or 4-channel capture.
Implement a constraint to enforce it.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/1588007614-25061-3-git-send-email-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
BDW boards using this machine driver supports only stereo capture and
playback. Implement a constraint to enforce it.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/1588007614-25061-2-git-send-email-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SND_SOC_DMIC depends on GPIOLIB, so let's add the dependency before
selecting SND_SOC_DMIC.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200427165211.23463-2-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the mic gain registers for channels 2-4.
The incorret register was being set as it was touching the CH1 config
registers.
Fixes: 37bde5acf040 ("ASoC: tlv320adcx140: Add the tlv320adcx140 codec driver family")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200427203608.7031-1-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
davinci_mcasp_get_dma_type() invokes dma_request_chan(), which returns a
reference of the specified dma_chan object to "chan" with increased
refcnt.
When davinci_mcasp_get_dma_type() returns, local variable "chan" becomes
invalid, so the refcount should be decreased to keep refcount balanced.
The reference counting issue happens in one exception handling path of
davinci_mcasp_get_dma_type(). When chan device is NULL, the function
forgets to decrease the refcnt increased by dma_request_chan(), causing
a refcnt leak.
Fix this issue by calling dma_release_channel() when chan device is
NULL.
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/1587818916-38730-1-git-send-email-xiyuyang19@fudan.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Automatically choose DMIC pipeline format configuration depending on
information included in NHLT.
Change the access rights of appropriate kcontrols to read-only in order
to prevent user interference.
Signed-off-by: Mateusz Gorski <mateusz.gorski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200427132727.24942-4-mateusz.gorski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For pipes supporting multiple input/output formats, kcontrol is
created and selection of pipe input and output configuration
is done based on control set.
If more than one configuration is supported, then this patch
allows user to select configuration of choice
using amixer settings.
Signed-off-by: Mateusz Gorski <mateusz.gorski@linux.intel.com>
Signed-off-by: Pavan K S <pavan.k.s@intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200427132727.24942-3-mateusz.gorski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add alternative topology binary file name based on used machine driver
and fallback to use this name after failed attempt to load topology file
with name based on NHLT.
This change addresses multiple issues with current mechanism, for
example - there are devices without NHLT table, and that currently
results in tplg_name being empty.
Signed-off-by: Mateusz Gorski <mateusz.gorski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200427132727.24942-2-mateusz.gorski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The patch 955ac624058f: "ASoC: fsl_easrc: Add EASRC ASoC CPU DAI
drivers" from Apr 16, 2020, leads to the following Smatch complaint:
sound/soc/fsl/fsl_easrc.c:1529 fsl_easrc_hw_free()
warn: variable dereferenced before check 'ctx' (see line 1527)
sound/soc/fsl/fsl_easrc.c
1526 struct fsl_asrc_pair *ctx = runtime->private_data;
1527 struct fsl_easrc_ctx_priv *ctx_priv = ctx->private;
^^^^^
Dereference
1528
1529 if (ctx && (ctx_priv->ctx_streams & BIT(substream->stream))) {
^^^
This check is too late, to prevent a NULL dereference.
1530 ctx_priv->ctx_streams &= ~BIT(substream->stream);
1531 fsl_easrc_release_context(ctx);
Fixes: 955ac62405 ("ASoC: fsl_easrc: Add EASRC ASoC CPU DAI drivers")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/d23c939f1c9eeb3fce34b6c34d44e2d6156f663a.1587799355.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the following coccicheck warning:
sound/soc/ti/omap-mcbsp.c:1188:5-11: WARNING: Comparison to bool
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Link: https://lore.kernel.org/r/20200426094238.23914-1-yanaijie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function mxs_saif_probe() is only called with an
openfirmware platform device. Therefore there is no
need to check that it has an openfirmware node.
Signed-off-by: Shengju Zhang <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20200420142509.9728-1-tangbin@cmss.chinamobile.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The number of speaker amplifiers may vary between platforms. UCM
needs to check amp number to include different configuration files.
This patch keeps track of the number of speaker amplifiers and
stores it in components string of the card.
Tested on Comet Lake platforms.
Signed-off-by: randerwang <rander.wang@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200419183509.4134-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the function hi6210_i2s_probe(), devm_clk_get() doesn't return NULL.
Thus use IS_ERR() to validate the return value instead of IS_ERR_OR_NULL().
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20200427091145.4268-1-tangbin@cmss.chinamobile.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Disable exception interrupt before scheduling tasklet, otherwise if
the tasklet isn't handled immediately, there will be endless xrun
interrupt.
Fixes: 7ccafa2b38 ("ASoC: fsl_esai: recover the channel swap after xrun")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/a8f2ad955aac9e52587beedc1133b3efbe746895.1587968824.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This new Lenovo ThinkCenter has two front mics which can't be handled
by PA so far, so apply the fixup ALC283_FIXUP_HEADSET_MIC to change
the location for one of the mics.
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20200427030039.10121-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
... and no, __put_user() doesn't help here - skipping
access_ok() on the second call does not remove the
possibility of page having become unmapped or r/o
in the meanwhile
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Apparently interface 1 is control interface akin to HD500X,
setting LINE6_CAP_CONTROL and choosing it as ctrl_if fixes
audio playback on POD HD500.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200425201115.3430-1-anarsoul@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
[ This is again a forward-port of the fix applied for 5.6-base code
(commit 4285de0725) to 5.7-base, hence neither Fixes nor
Cc-to-stable tags are included here -- tiwai ]
The checks of the plugin buffer overflow in the previous fix by commit
f2ecf903ef ("ALSA: pcm: oss: Avoid plugin buffer overflow")
are put in the wrong places mistakenly, which leads to the expected
(repeated) sound when the rate plugin is involved. Fix in the right
places.
Also, at those right places, the zero check is needed for the
termination node, so added there as well, and let's get it done,
finally.
Link: https://lore.kernel.org/r/20200424193843.20397-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This became a slightly big pull request, as the accumulated ASoC
fixes are included here. Some highlights:
- Revert of ASoC DAI startup changes that caused regression on some
x86 platforms
- Regression fix in HD-audio power management and driver blacklist
- A collection of ASoC DAPM and topology fixes
- Continued USB-audio fixes and quirks
- Lots of small device-specific fixes
- Rockchip S/PDIF DT stuff update for validation issues
-----BEGIN PGP SIGNATURE-----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=17wz
-----END PGP SIGNATURE-----
Merge tag 'sound-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This became a slightly big pull request, as the accumulated ASoC fixes
are included here. Some highlights:
- Revert of ASoC DAI startup changes that caused regression on some
x86 platforms
- Regression fix in HD-audio power management and driver blacklist
- A collection of ASoC DAPM and topology fixes
- Continued USB-audio fixes and quirks
- Lots of small device-specific fixes
- Rockchip S/PDIF DT stuff update for validation issues"
* tag 'sound-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (51 commits)
ALSA: hda: Always use jackpoll helper for jack update after resume
ALSA: hda/realtek - Add new codec supported for ALC245
ALSA: usb-audio: Fix usb audio refcnt leak when getting spdif
ALSA: usb-audio: Add connector notifier delegation
ALSA: usb-audio: Apply async workaround for Scarlett 2i4 2nd gen
ASoC: wm8960: Fix wrong clock after suspend & resume
ALSA: usx2y: Fix potential NULL dereference
ALSA: usb-audio: Add quirk for Focusrite Scarlett 2i2
ASoC: wm89xx: Add missing dependency
ASoC: dapm: fixup dapm kcontrol widget
ASoC: rsnd: Fix "status check failed" spam for multi-SSI
ASoC: rsnd: Don't treat master SSI in multi SSI setup as parent
ASoC: meson: gx-card: fix codec-to-codec link setup
ASoC: meson: axg-card: fix codec-to-codec link setup
ALSA: usb-audio: Add static mapping table for ALC1220-VB-based mobos
ALSA: hda: Remove ASUS ROG Zenith from the blacklist
ALSA: hda/realtek - Fix unexpected init_amp override
ALSA: usb-audio: Filter out unsupported sample rates on Focusrite devices
ASoC: SOF: Intel: add min/max channels for SSP on Baytrail/Broadwell
ASoC: stm32: sai: fix sai probe
...
It may be useful to pass the specific model to the generic HDA codec
routines like the legacy HDA driver (snd-hda-intel) allows.
The model name "sofbus" is tricky anyway.
Original proposal: https://lore.kernel.org/alsa-devel/20191203161908.7496-1-perex@perex.cz/
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200424092520.23989-1-perex@perex.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
gcc-6.5 and earlier show a new warning:
sound/soc/soc-compress.c: In function ‘soc_compr_open’:
sound/soc/soc-compress.c:75:28: warning: ‘component’ is used uninitialized in this function [-Wuninitialized]
struct snd_soc_component *component, *save = NULL;
^~~~~~~~~
Simplest fix is to initialize it to avoid the warning.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Rong Chen <rong.a.chen@intel.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/lkml/202004201540.vYPhhYMs%25lkp@intel.com
Link: https://lore.kernel.org/r/20200424005437.3941-1-rong.a.chen@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Previously CLOCKING2 is set as a volatile register, but cause
issue at suspend & resume, that some bits of CLOCKING2 is not
restored at resume, for example SYSCLK_SRC bits, then the output
clock is wrong.
The volatile property is caused by CLASSD_CLK_DIV bits,
which are controlled by the chip itself. But the datasheet
claims these are read only and protected by the security key,
and they are not read by the driver at all.
So it should be safe to change CLOCKING2 to be non-volatile.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/6d25d5b36d4b9aeb8655b5e947dad52214e34177.1587693523.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The linked list entry from FIFO is peeked at
queue_pending_output_urbs() but the actual element pop-out is
performed outside the spinlock, and it's potentially racy.
Do delete the link at the right place inside the spinlock.
Fixes: 8fdff6a319 ("ALSA: snd-usb: implement new endpoint streaming model")
Link: https://lore.kernel.org/r/20200424074016.14301-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For computation of the the next frame size current value of fs/fps and
accumulated fractional parts of fs/fps are used, where values are stored
in Q16.16 format. This is quite natural for computing frame size for
asynchronous endpoints driven by explicit feedback, since in this case
fs/fps is a value provided by the feedback endpoint and it's already in
the Q format. If an error is accumulated over time, the device can
adjust fs/fps value to prevent buffer overruns/underruns.
But for synchronous endpoints the accuracy provided by these computations
is not enough. Due to accumulated error the driver periodically produces
frames with incorrect size (+/- 1 audio sample).
This patch fixes this issue by implementing a different algorithm for
frame size computation. It is based on accumulating of the remainders
from division fs/fps and it doesn't accumulate errors over time. This
new method is enabled for synchronous and adaptive playback endpoints.
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20200424022449.14972-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commit 3c6fd1f07e ("ALSA: hda: Add driver blacklist") added a
new blacklist for the devices that are known to have empty codecs, and
one of the entries was ASUS ROG Zenith II (PCI SSID 1043:874f).
However, it turned out that the very same PCI SSID is used for the
previous model that does have the valid HD-audio codecs and the change
broke the sound on it.
Since the empty codec problem appear on the certain AMD platform (PCI
ID 1022:1487), this patch changes the blacklist matching to both PCI
ID and SSID using pci_match_id(). Also, the entry that was removed by
the previous fix for ASUS ROG Zenigh II is re-added.
Link: https://lore.kernel.org/r/20200424061222.19792-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
NHLT fetch based on _DSM prevents ACPI table override mechanism from
being utilized. Make use of acpi_get_table to enable it and get rid of
redundant code. In consequence, NHLT can be overridden just like any
other ACPI table, e.g.: DSDT or SSDT.
Change has been verified on all Intel AVS architecture platforms, RVP
and production laptops both.
Change possible due to addition of NHLT signature to the list of
standard ACPI tables:
https://patchwork.kernel.org/patch/11463235/
Override helps not only with debug purposes but also allows user for
table adjustment when one found on their production hardware is invalid.
Shared official NHLT spec is now available to community at:
https://01.org/blogs/intel-smart-sound-technology-audio-dsp
NHLT support for iASL is still ongoing subject but should be available
in nearest future.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20200423160310.28019-1-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
HD-audio codec driver applies a tricky procedure to forcibly perform
the runtime resume by mimicking the usage count even if the device has
been runtime-suspended beforehand. This was needed to assure to
trigger the jack detection update after the system resume.
And recently we also applied the similar logic to the HD-audio
controller side. However this seems leading to some inconsistency,
and eventually PCI controller gets screwed up.
This patch is an attempt to fix and clean up those behavior: instead
of the tricky runtime resume procedure, the existing jackpoll work is
scheduled when such a forced codec resume is required. The jackpoll
work will power up the codec, and this alone should suffice for the
jack status update in usual cases. If the extra polling is requested
(by checking codec->jackpoll_interval), the manual update is invoked
after that, and the codec is powered down again.
Also, we filter the spurious wake up of the codec from the controller
runtime resume by checking codec->relaxed_resume flag. If this flag
is set, basically we don't need to wake up explicitly, but it's
supposed to be done via the audio component notifier.
Fixes: c4c8dd6ef8 ("ALSA: hda: Skip controller resume if not needed")
Link: https://lore.kernel.org/r/20200422203744.26299-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_microii_spdif_default_get() invokes snd_usb_lock_shutdown(), which
increases the refcount of the snd_usb_audio object "chip".
When snd_microii_spdif_default_get() returns, local variable "chip"
becomes invalid, so the refcount should be decreased to keep refcount
balanced.
The reference counting issue happens in several exception handling paths
of snd_microii_spdif_default_get(). When those error scenarios occur
such as usb_ifnum_to_if() returns NULL, the function forgets to decrease
the refcnt increased by snd_usb_lock_shutdown(), causing a refcnt leak.
Fix this issue by jumping to "end" label when those error scenarios
occur.
Fixes: 447d6275f0 ("ALSA: usb-audio: Add sanity checks for endpoint accesses")
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1587617711-13200-1-git-send-email-xiyuyang19@fudan.edu.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If there is a power GPIO provided we control it from DAPM context so there
is no problem with a sleeping GPIO, use the _cansleep() version of the API
to allow this.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200422083550.50711-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
It turned out that ALC1220-VB USB-audio device gives the interrupt
event to some PCM terminals while those don't allow the connector
state request but only the actual I/O terminals return the request.
The recent commit 7dc3c5a017 ("ALSA: usb-audio: Don't create jack
controls for PCM terminals") excluded those phantom terminals, so
those events are ignored, too.
My first thought was that this could be easily deduced from the
associated terminals, but some of them have even no associate terminal
ID, hence it's not too trivial to figure out.
Since the number of such terminals are small and limited, this patch
implements another quirk table for the simple mapping of the
connectors. It's not really scalable, but let's hope that there will
be not many such funky devices in future.
Fixes: 7dc3c5a017 ("ALSA: usb-audio: Don't create jack controls for PCM terminals")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206873
Link: https://lore.kernel.org/r/20200422113320.26664-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent batch of SOF changes failed to build on some x86
configurations including an allmodconfig, revert the commits:
e150ef4169 ASoC: SOF: Introduce extended manifest
3710914178 ASoC: SOF: ext_manifest: parse firmware version
7c024b948c ASoC: SOF: ext_manifest: parse compiler version
9e72f13ee5 ASoC: SOF: ext_manifest: parse windows
to fix this.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the following coccicheck warning:
sound/pci/oxygen/xonar_pcm179x.c:463:1-17: WARNING: Assignment of 0/1 to
bool variable
sound/pci/oxygen/xonar_pcm179x.c:505:1-17: WARNING: Assignment of 0/1 to
bool variable
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20200422071646.48436-1-yanaijie@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This should be ARRAY_SIZE() instead of sizeof(). The sizeof() limit is
too high so it doesn't work.
Fixes: 093b8494f2 ("ALSA: usb-audio: Print more information in stream proc files")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20200422092255.GB195357@mwanda
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This contains a couple of fixes that are needed to properly reconfigure
the audio clocks on older Tegra devices.
-----BEGIN PGP SIGNATURE-----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=XTzg
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl6f95oTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0GkGB/0X/amUL/B6lXjZky3rjkLP9uewLZls
Q0NsGdhkpX/2ixnaWMJO3eRj1RFT59JEKmU91nBmwh93i+CJ6UzDrGOU7LURu6e/
tRG4KWiqDaHNsKTHUE8wBSfEAeny9FlxQcWmtngb1hQCfcprqheMLQRGB8pXNz3C
Cg28+FcEjXENFeNRxxVe5+Ld8odO7YhSnNj4NjwrVrpVuAfjtU9RumqOA0gZRj+i
vhg8C83mlmBZO1RmKmtHOaCqGVoNUz2wW6+lxyC6DO+v4SxgGP0pcrbrBG1m61Bg
gFmXV9SlWgQUf7khOp1EDW4TQ023zz0evXAxVlKtQeBwRn+aOYDenYy7
=Aeww
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.7-asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into asoc-5.7
ASoC: tegra: Fixes for v5.7-rc3
This contains a couple of fixes that are needed to properly reconfigure
the audio clocks on older Tegra devices.
Quite a lot of fixes here, a lot of driver specific ones but the biggest
one is the revert of changes to the startup and shutdown sequence for
DAIs that went in during the merge window - they broke some older x86
platforms and attempts to fix them didn't succeed so it's safer to just
roll them back and try to make sure those platforms are handled properly
in any future attempt.
The rockchip S/PDIF DT stuff was IIRC for validation issues.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl6fSlITHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0ODsB/4whz1ppFUJ4+XLaLoOTCJjKPnQEg6N
lZRhPS1/gQVL/qUpwOIS3vr3Z+8Zsm9F3VXOEGmMFfPR1f4+Fejz1OJkg0mUuhzr
Xx+LHOGyaabj9zvoNxZDS1eE00t8dLrkoRx6vce3dRZluZ5DATN6L/4EB3RIhuny
4ckuQAf6KEGLYpqzAVAJyUp8Q6pBl15vHyH+KMXHZJ4qxQjZaBPA7tPabdzRqStM
Lq+xKkBkJepDet3vQZvvmwNPhS0pU1aqqcopVxj03zivpMwQRftcSYTpdT2SpIF1
GM1FGiRV1lbNUsQNnhkImE9V6X+I3zmQR4dLUbGTT+Le/0e8CtKRXYCQ
=D8Su
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.7-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.7
Quite a lot of fixes here, a lot of driver specific ones but the biggest
one is the revert of changes to the startup and shutdown sequence for
DAIs that went in during the merge window - they broke some older x86
platforms and attempts to fix them didn't succeed so it's safer to just
roll them back and try to make sure those platforms are handled properly
in any future attempt.
The rockchip S/PDIF DT stuff was IIRC for validation issues.
Due to rounding error driver sometimes incorrectly calculate next packet
size, which results in audible clicks on devices with synchronous playback
endpoints. For example on a high speed bus and a sample rate 44.1 kHz it
loses one sample every ~40.9 seconds. Fortunately playback interface on
Scarlett 2i4 2nd gen has a working explicit feedback endpoint, so we can
switch playback data endpoint to asynchronous mode as a workaround.
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20200421190908.462860-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Recent fix for jack detection caused a regression on systems with HDA
audio codec but no HDMI/DP audio via i915 graphics, leading to a kernel
oops at device probe. On these systems, HDA bus instance lookup fails,
as the first ASoC runtime of the card is connected to a dummy codec
(as no HDMI codec is present).
Fixes: 3a24f135e6 ("ASoC: intel/skl/hda - set autosuspend timeout for hda codecs")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200420205431.13070-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add new module driver for new ASRC in i.MX8MN, several commits
are added for new property fsl,asrc-format
Shengjiu Wang (7):
ASoC: fsl_asrc: rename asrc_priv to asrc
ASoC: dt-bindings: fsl_asrc: Add new property fsl,asrc-format
ASoC: fsl-asoc-card: Support new property fsl,asrc-format
ASoC: fsl_asrc: Support new property fsl,asrc-format
ASoC: fsl_asrc: Move common definition to fsl_asrc_common
ASoC: dt-bindings: fsl_easrc: Add document for EASRC
ASoC: fsl_easrc: Add EASRC ASoC CPU DAI drivers
changes in v9
- use lowercase for dt example.
changes in v8
- change get_pair_priv_size to pair_priv_size variable
changes in v7
- updated according to Nicoin's comments.
- add get_pair_priv_size to replace PAIR_PRIVATE_SIZE
changes in v6
- updated according to Nicoin's and Rob's comments.
changes in v5
- Add new property fsl,asrc-format, rather than change fsl,asrc-width
to fsl,asrc-formt.
- code change for above change.
changes in v4
- Add several commit for changing DT binding asrc-width to asrc-format
- rename asrc_priv to asrc
changes in v3
- add new commit "ASoC: fsl_asrc: Change asrc_width to asrc_format"
- modify binding doc to yaml format
- remove fsl_easrc_dma.c, make fsl_asrc_dma.c useable for easrc.
changes in v2
- change i.MX815 to i.MX8MN
- Add changes in Kconfig and Makefile
.../devicetree/bindings/sound/fsl,asrc.txt | 4 +
.../devicetree/bindings/sound/fsl,easrc.yaml | 101 +
sound/soc/fsl/Kconfig | 11 +
sound/soc/fsl/Makefile | 2 +
sound/soc/fsl/fsl-asoc-card.c | 24 +-
sound/soc/fsl/fsl_asrc.c | 305 +--
sound/soc/fsl/fsl_asrc.h | 74 +-
sound/soc/fsl/fsl_asrc_common.h | 106 +
sound/soc/fsl/fsl_asrc_dma.c | 54 +-
sound/soc/fsl/fsl_easrc.c | 2114 +++++++++++++++++
sound/soc/fsl/fsl_easrc.h | 651 +++++
11 files changed, 3212 insertions(+), 234 deletions(-)
create mode 100644 Documentation/devicetree/bindings/sound/fsl,easrc.yaml
create mode 100644 sound/soc/fsl/fsl_asrc_common.h
create mode 100644 sound/soc/fsl/fsl_easrc.c
create mode 100644 sound/soc/fsl/fsl_easrc.h
--
2.21.0
Hi Mark
Current snd_soc_component_driver has compr_ops,
but it is created for ALSA, not for ALSA SoC.
This means it doesn't know the callback is for which component,
thus, each callback needs to get component via lookup function.
It is not good design, and will not work in the future,
because ASoC can have multipul same name component which
current lookup function can't handle.
This v2 patch-set adds new snd_compress_ops and call
callbacks with component.
v1 is here
Link: https://lore.kernel.org/alsa-devel/87blnqpuqp.wl-kuninori.morimoto.gx@renesas.com/
Kuninori Morimoto (8):
ASoC: soc-compress: add snd_compress_ops
ASoC: codec: wm_adsp: use snd_compress_ops
ASoC: uniphier: use snd_compress_ops
ASoC: qcom: q6sp6: use snd_compress_ops
ASoC: intel: atom: use snd_compress_ops
ASoC: sof: use snd_compress_ops
ASoC: sprd: use snd_compress_ops
ASoC: soc-compress: remove snd_compr_ops
include/sound/soc-component.h | 40 ++++++++-
sound/soc/codecs/cs47l15.c | 9 +-
sound/soc/codecs/cs47l24.c | 8 +-
sound/soc/codecs/cs47l35.c | 9 +-
sound/soc/codecs/cs47l85.c | 9 +-
sound/soc/codecs/cs47l90.c | 9 +-
sound/soc/codecs/cs47l92.c | 9 +-
sound/soc/codecs/wm5102.c | 9 +-
sound/soc/codecs/wm5110.c | 8 +-
sound/soc/codecs/wm_adsp.c | 18 ++--
sound/soc/codecs/wm_adsp.h | 18 ++--
.../intel/atom/sst-mfld-platform-compress.c | 43 +++++----
sound/soc/intel/atom/sst-mfld-platform-pcm.c | 2 +-
sound/soc/intel/atom/sst-mfld-platform.h | 2 +-
sound/soc/qcom/qdsp6/q6asm-dai.c | 51 ++++++-----
sound/soc/soc-compress.c | 89 ++++++++++---------
sound/soc/sof/compress.c | 7 +-
sound/soc/sof/compress.h | 7 +-
sound/soc/sof/pcm.c | 4 +-
sound/soc/sof/sof-priv.h | 2 +-
sound/soc/sprd/sprd-pcm-compress.c | 49 +++++-----
sound/soc/sprd/sprd-pcm-dma.c | 2 +-
sound/soc/sprd/sprd-pcm-dma.h | 2 +-
sound/soc/uniphier/aio-compress.c | 45 ++++++----
sound/soc/uniphier/aio-dma.c | 2 +-
sound/soc/uniphier/aio.h | 2 +-
26 files changed, 265 insertions(+), 190 deletions(-)
--
2.17.1
The ZL38060 is a "Connected Home Audio Processor" from Microsemi,
which consists of a Digital Signal Processor (DSP), several Digital
Audio Interfaces (DAIs), analog outputs, and a block of 14 GPIOs.
This driver supports only a tiny subset of the chip's functionality
and possible configurations:
- bypass mode (whole dsp block is bypassed)
- chip's I2S DAI routed directly to/from DACs and microphone
- chip's internal clock is driven by a 12 MHz external crystal
- chip's DAI connected to CPU is I2S, and bit + frame clock master
- chip must be strapped for "host boot": in this mode, firmware will
be provided by this driver.
Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Link: https://lore.kernel.org/r/20200417221341.31428-2-TheSven73@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_compr_ops couldn't care called component,
but now we can care it via snd_compress_ops.
All drivers switched to it.
This patch removes snd_compr_ops.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87lfmqvdig.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We can use snd_compress_ops.
Let's switch to use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87mu76vdiv.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We can use snd_compress_ops.
Let's switch to use it.
Upstream code doesn't have sof_compressed_ops.
This patch assume it is implemented at out-of-tree.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87o8rmvdj7.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
vWe can use snd_compress_ops.
Let's switch to use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87pnc2vdka.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We can use snd_compress_ops.
Let's switch to use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87r1wivdkz.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We can use snd_compress_ops.
Let's switch to use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87sggyvdld.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We can use snd_compress_ops.
Let's switch to use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/87tv1evdlu.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current snd_soc_component_driver has compr_ops, and each driver can
have callback via it. But, it is mainly created for ALSA, thus, it
doesn't have "component" as parameter.
Thus, each callback can't know it is called for which component.
Each callback currently is getting "component" by using
snd_soc_rtdcom_lookup() with driver name.
--- ALSA SoC ---
...
if (component->driver->compr_ops &&
component->driver->compr_ops->open)
=> return component->driver->compr_ops->open(stream);
...
--- driver ---
static int xxx_open(struct snd_compr_stream *stream)
{
struct snd_soc_pcm_runtime *rtd = stream->private_data;
=> struct snd_soc_component *component = snd_soc_rtdcom_lookup(..);
...
}
It works today, but, will not work in the future if we support multi
CPU/Codec/Platform, because 1 rtd might have multiple same driver
name component.
To solve this issue, each callback need to be called with component.
We already have many component driver callbacks.
This patch adds new snd_compress_ops, and call it with "component".
--- ALSA SoC ---
...
if (component->driver->compress_ops->open)
=> return component->driver->compress_ops->open(
component, substream);
~~~~~~~~~
...
--- driver ---
static int xxx_open(struct snd_soc_component *component,
struct snd_compr_stream *stream)
{
=> /* it don't need to use snd_soc_rtdcom_lookup() */
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87v9luvdmh.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Looks like I misread the Kconfig magic and this driver can be compiled
into 32-bit kernels. Add back the hack to extent the range of the
resource_size_t, and include the header with the txx9-specific ioremap
magic for that.
Fixes: acfaaf52eb ("ASoC: txx9: don't work around too small resource_size_t")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
EASRC (Enhanced Asynchronous Sample Rate Converter) is a new IP module
found on i.MX8MN. It is different with old ASRC module.
The primary features for the EASRC are as follows:
- 4 Contexts - groups of channels with an independent time base
- Fully independent and concurrent context control
- Simultaneous processing of up to 32 audio channels
- Programmable filter charachteristics for each context
- 32, 24, 20, and 16-bit fixed point audio sample support
- 32-bit floating point audio sample support
- 8kHz to 384kHz sample rate
- 1/16 to 8x sample rate conversion ratio
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Cosmin-Gabriel Samoila <cosmin.samoila@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/260d7a9fbddf9fa90760d30095df60a4c25fd0a1.1587038908.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a new ASRC included in i.MX serial platform, there
are some common definition can be shared with each other.
So move the common definition to a separate header file.
And add fsl_asrc_pair_priv and fsl_asrc_priv for
the variable specific for the module, which can be used
internally.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/7106993928ea9e9720e6b42ec601871103155b1c.1587038908.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In order to align with new ESARC, we add new property fsl,asrc-format.
The fsl,asrc-format can replace the fsl,asrc-width, driver
can accept format from devicetree, don't need to convert it to
format through width.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/2be9664768f32982ba4f71e49749f7390096ac9f.1587038908.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In order to align with new ESARC, we add new property fsl,asrc-format.
The fsl,asrc-format can replace the fsl,asrc-width, driver
can accept format from devicetree, don't need to convert it to
format through width.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/02f53d5512b9acd3492e2acdd5e0ba3113f18009.1587038908.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Tegra PMC clock clk_out_1 is dedicated for audio mclk from Tegra30
through Tegra210 and currently Tegra clock driver keeps the audio mclk
enabled.
With the move of PMC clocks from clock driver into pmc driver, audio
mclk enable from clock driver is removed and this should be taken care
of by the audio driver.
tegra_asoc_utils_init() calls tegra_asoc_utils_set_rate() and audio mclk
rate configuration is not needed during init and the rate is actually
set during the ->hw_params() callback.
So, this patch removes tegra_asoc_utils_set_rate() call and just leaves
the audio mclk enabled.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tegra PMC clock clk_out_1 is dedicated for audio mclk from Tegra30
through Tegra210 and currently Tegra clock driver does the initial
parent configuration for audio mclk and keeps it enabled by default.
With the move of PMC clocks from clock driver into PMC driver, audio
clocks parent configuration can be specified through the device tree
using assigned-clock-parents property and audio mclk control should be
taken care of by the audio driver.
This patch has implementation for parent configuration when default
parent configuration through assigned-clock-parents property is not
specified in the device tree.
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
tegra_asoc_utils uses clk_get() to get the clock and clk_put() to free
them explicitly.
This patch updates it to use device managed resource API devm_clk_get()
so the clock will be automatically released and freed when the device is
unbound and removes tegra_asoc_utils_fini() as its no longer needed.
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
After suspend & resume, wm8960_hw_params may be called when
bias_level is not SND_SOC_BIAS_ON, then wm8960_configure_clocking
is not called. But if sample rate is changed at that time, then
the output clock rate will be not correct.
So judgement of bias_level is SND_SOC_BIAS_ON in wm8960_hw_params
is not necessary and it causes above issue.
Fixes: 3176bf2d7c ("ASoC: wm8960: update pll and clock setting function")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/1587468525-27514-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The error handling code in usX2Y_rate_set() may hit a potential NULL
dereference when an error occurs before allocating all us->urb[].
Add a proper NULL check for fixing the corner case.
Reported-by: Lin Yi <teroincn@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200420075529.27203-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Force it to use asynchronous playback.
Same quirk has already been added for Focusrite Scarlett Solo (2nd gen)
with a commit 46f5710f0b ("ALSA: usb-audio: Add quirk for Focusrite
Scarlett Solo").
This also seems to prevent regular clicks when playing at 44100Hz
on Scarlett 2i2 (2nd gen). I did not notice any side effects.
Moved both quirks to snd_usb_audioformat_attributes_quirk() as suggested.
Signed-off-by: Gregor Pintar <grpintar@gmail.com>
Reviewed-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20200420214030.2361-1-grpintar@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix the following coccicheck warning:
sound/soc/codecs/wcd934x.c:3881:8-17: WARNING: Comparison of 0/1 to bool
variable
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20200420042833.19116-1-yanaijie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/codecs/wm8900.o: In function `wm8900_i2c_probe':
wm8900.c:(.text+0xa36): undefined reference to `__devm_regmap_init_i2c'
sound/soc/codecs/wm8900.o: In function `wm8900_modinit':
wm8900.c:(.init.text+0xb): undefined reference to `i2c_register_driver'
sound/soc/codecs/wm8900.o: In function `wm8900_exit':
wm8900.c:(.exit.text+0x8): undefined reference to `i2c_del_driver'
sound/soc/codecs/wm8988.o: In function `wm8988_i2c_probe':
wm8988.c:(.text+0x857): undefined reference to `__devm_regmap_init_i2c'
sound/soc/codecs/wm8988.o: In function `wm8988_modinit':
wm8988.c:(.init.text+0xb): undefined reference to `i2c_register_driver'
sound/soc/codecs/wm8988.o: In function `wm8988_exit':
wm8988.c:(.exit.text+0x8): undefined reference to `i2c_del_driver'
sound/soc/codecs/wm8995.o: In function `wm8995_i2c_probe':
wm8995.c:(.text+0x1c4f): undefined reference to `__devm_regmap_init_i2c'
sound/soc/codecs/wm8995.o: In function `wm8995_modinit':
wm8995.c:(.init.text+0xb): undefined reference to `i2c_register_driver'
sound/soc/codecs/wm8995.o: In function `wm8995_exit':
wm8995.c:(.exit.text+0x8): undefined reference to `i2c_del_driver'
Add SND_SOC_I2C_AND_SPI dependency to fix this.
Fixes: ea00d95200 ("ASoC: Use imply for SND_SOC_ALL_CODECS")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200420125343.20920-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As these two drivers support I2C and SPI, we should add the SND_SOC_I2C_AND_SPI
dependency instead.
Fixes: ce0c97f8a2 ("ASoC: Fix SND_SOC_ALL_CODECS imply SPI fallout")
Signed-off-by: Wei Li <liwei391@huawei.com>
Link: https://lore.kernel.org/r/20200420202410.47327-3-liwei391@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When I2C=m, SND_SOC_WM8900=y, SND_SOC_WM8988=y, SND_SOC_WM8995=y:
sound/soc/codecs/wm8900.o: In function `wm8900_i2c_probe':
wm8900.c:(.text+0xa16): undefined reference to `__devm_regmap_init_i2c'
sound/soc/codecs/wm8900.o: In function `wm8900_modinit':
wm8900.c:(.init.text+0xb): undefined reference to `i2c_register_driver'
sound/soc/codecs/wm8900.o: In function `wm8900_exit':
wm8900.c:(.exit.text+0x8): undefined reference to `i2c_del_driver'
sound/soc/codecs/wm8988.o: In function `wm8988_i2c_probe':
wm8988.c:(.text+0x86b): undefined reference to `__devm_regmap_init_i2c'
sound/soc/codecs/wm8988.o: In function `wm8988_modinit':
wm8988.c:(.init.text+0xb): undefined reference to `i2c_register_driver'
sound/soc/codecs/wm8988.o: In function `wm8988_exit':
wm8988.c:(.exit.text+0x8): undefined reference to `i2c_del_driver'
sound/soc/codecs/wm8995.o: In function `wm8995_i2c_probe':
wm8995.c:(.text+0x1b5b): undefined reference to `__devm_regmap_init_i2c'
sound/soc/codecs/wm8995.o: In function `wm8995_modinit':
wm8995.c:(.init.text+0xb): undefined reference to `i2c_register_driver'
sound/soc/codecs/wm8995.o: In function `wm8995_exit':
wm8995.c:(.exit.text+0x8): undefined reference to `i2c_del_driver'
As these drivers support I2C and SPI, we add the SND_SOC_I2C_AND_SPI
dependency to solve it.
Fixes: ea00d95200 ("ASoC: Use imply for SND_SOC_ALL_CODECS")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Li <liwei391@huawei.com>
Link: https://lore.kernel.org/r/20200420202410.47327-2-liwei391@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix rsnd_dai_call() operations being performed twice for the master SSI
in multi-SSI setups, and fix the rsnd_ssi_stop operation for multi-SSI
setups.
The only visible effect of these issues was some "status check failed"
spam when the rsnd_ssi_stop was called, but overall the code is cleaner
now, and some questionable writes to the SSICR register which did not
lead to any observable misbehaviour but were contrary to the datasheet
are fixed.
Mark:
The first patch kind of reverts my "ASoC: rsnd: Fix parent SSI
start/stop in multi-SSI mode" from a few days ago and achieves the same
effect in a simpler fashion, if you would prefer a clean patch series
based on v5.6 drop me a note.
Greetings,
Matthias
Matthias Blankertz (2):
ASoC: rsnd: Don't treat master SSI in multi SSI setup as parent
ASoC: rsnd: Fix "status check failed" spam for multi-SSI
sound/soc/sh/rcar/ssi.c | 18 +++++++++++++-----
1 file changed, 13 insertions(+), 5 deletions(-)
base-commit: 15a5760cb8
--
2.26.1
This patchset fixes the problem reported by Marc in this thread [0]
The problem was due to an error in the meson card drivers which had
the "no_pcm" dai_link property set on codec-to-codec links
[0]: https://lore.kernel.org/r/20200417122732.GC5315@sirena.org.uk
Jerome Brunet (2):
ASoC: meson: axg-card: fix codec-to-codec link setup
ASoC: meson: gx-card: fix codec-to-codec link setup
sound/soc/meson/axg-card.c | 4 +++-
sound/soc/meson/gx-card.c | 4 +++-
2 files changed, 6 insertions(+), 2 deletions(-)
--
2.25.2
snd_soc_dapm_kcontrol widget which is created by autodisable control
should contain correct on_val, mask and shift because it is set when the
widget is powered and changed value is applied on registers by following
code in dapm_seq_run_coalesced().
mask |= w->mask << w->shift;
if (w->power)
value |= w->on_val << w->shift;
else
value |= w->off_val << w->shift;
Shift on the mask in dapm_kcontrol_data_alloc() is removed to prevent
double shift.
And, on_val in dapm_kcontrol_set_value() is modified to get correct
value in the dapm_seq_run_coalesced().
Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/000001d61537$b212f620$1638e260$@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the rsnd_ssi_stop function to skip disabling the individual SSIs of
a multi-SSI setup, as the actual stop is performed by rsnd_ssiu_stop_gen2
- the same logic as in rsnd_ssi_start. The attempt to disable these SSIs
was harmless, but caused a "status check failed" message to be printed
for every SSI in the multi-SSI setup.
The disabling of interrupts is still performed, as they are enabled for
all SSIs in rsnd_ssi_init, but care is taken to not accidentally set the
EN bit for an SSI where it was not set by rsnd_ssi_start.
Signed-off-by: Matthias Blankertz <matthias.blankertz@cetitec.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20200417153017.1744454-3-matthias.blankertz@cetitec.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The master SSI of a multi-SSI setup was attached both to the
RSND_MOD_SSI slot and the RSND_MOD_SSIP slot of the rsnd_dai_stream.
This is not correct wrt. the meaning of being "parent" in the rest of
the SSI code, where it seems to indicate an SSI that provides clock and
word sync but is not transmitting/receiving audio data.
Not treating the multi-SSI master as parent allows removal of various
special cases to the rsnd_ssi_is_parent conditions introduced in commit
a09fb3f28a ("ASoC: rsnd: Fix parent SSI start/stop in multi-SSI mode").
It also fixes the issue that operations performed via rsnd_dai_call()
were performed twice for the master SSI. This caused some "status check
failed" spam when stopping a multi-SSI stream as the driver attempted to
stop the master SSI twice.
Signed-off-by: Matthias Blankertz <matthias.blankertz@cetitec.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20200417153017.1744454-2-matthias.blankertz@cetitec.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since the addition of commit 9b5db05936 ("ASoC: soc-pcm: dpcm: Only allow
playback/capture if supported"), meson-axg cards which have codec-to-codec
links fail to init and Oops.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000128
Internal error: Oops: 96000044 [#1] PREEMPT SMP
CPU: 3 PID: 1582 Comm: arecord Not tainted 5.7.0-rc1
pc : invalidate_paths_ep+0x30/0xe0
lr : snd_soc_dapm_dai_get_connected_widgets+0x170/0x1a8
Call trace:
invalidate_paths_ep+0x30/0xe0
snd_soc_dapm_dai_get_connected_widgets+0x170/0x1a8
dpcm_path_get+0x38/0xd0
dpcm_fe_dai_open+0x70/0x920
snd_pcm_open_substream+0x564/0x840
snd_pcm_open+0xfc/0x228
snd_pcm_capture_open+0x4c/0x78
snd_open+0xac/0x1a8
...
While this error was initially reported the axg-card type, it also applies
to the gx-card type.
While initiliazing the links, ASoC treats the codec-to-codec links of this
card type as a DPCM backend. This error eventually leads to the Oops.
Most of the card driver code is shared between DPCM backends and
codec-to-codec links. The property "no_pcm" marking DCPM BE was left set on
codec-to-codec links, leading to this problem. This commit fixes that.
Fixes: e37a0c313a ("ASoC: meson: gx: add sound card support")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200420114511.450560-3-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since the addition of commit 9b5db05936 ("ASoC: soc-pcm: dpcm: Only allow
playback/capture if supported"), meson-axg cards which have codec-to-codec
links fail to init and Oops:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000128
Internal error: Oops: 96000044 [#1] PREEMPT SMP
CPU: 3 PID: 1582 Comm: arecord Not tainted 5.7.0-rc1
pc : invalidate_paths_ep+0x30/0xe0
lr : snd_soc_dapm_dai_get_connected_widgets+0x170/0x1a8
Call trace:
invalidate_paths_ep+0x30/0xe0
snd_soc_dapm_dai_get_connected_widgets+0x170/0x1a8
dpcm_path_get+0x38/0xd0
dpcm_fe_dai_open+0x70/0x920
snd_pcm_open_substream+0x564/0x840
snd_pcm_open+0xfc/0x228
snd_pcm_capture_open+0x4c/0x78
snd_open+0xac/0x1a8
...
While initiliazing the links, ASoC treats the codec-to-codec links of this
card type as a DPCM backend. This error eventually leads to the Oops.
Most of the card driver code is shared between DPCM backends and
codec-to-codec links. The property "no_pcm" marking DCPM BE was left set on
codec-to-codec links, leading to this problem. This commit fixes that.
Fixes: 0a8f1117a6 ("ASoC: meson: axg-card: add basic codec-to-codec link support")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200420114511.450560-2-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
TRX40 mobos from MSI and others with ALC1220-VB USB-audio device need
yet more quirks for the proper control names.
This patch provides the mapping table for those boards, correcting the
FU names for volume and mute controls as well as the terminal names
for jack controls. It also improves build_connector_control() not to
add the directional suffix blindly if the string is given from the
mapping table.
With this patch applied, the new UCM profiles will be effective.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206873
Link: https://lore.kernel.org/r/20200420062036.28567-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commit 3c6fd1f07e ("ALSA: hda: Add driver blacklist") added a
new blacklist for the devices that are known to have empty codecs, and
one of the entries was ASUS ROG Zenith II (PCI SSID 1043:874f).
However, it turned out that the very same PCI SSID is used for the
previous model that does have the valid HD-audio codecs and the change
broke the sound on it.
This patch reverts the corresponding entry as a temporary solution.
Although Zenith II and co will see get the empty HD-audio bus again,
it'd be merely resource wastes and won't affect the functionality,
so it's no end of the world. We'll need to address this later,
e.g. by either switching to DMI string matching or using PCI ID &
SSID pairs.
Fixes: 3c6fd1f07e ("ALSA: hda: Add driver blacklist")
Reported-by: Johnathan Smithinovic <johnathan.smithinovic@gmx.at>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200419071926.22683-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The txx9 sound driver deends on HAS_TXX9_ACLC, which is only set for
three tx49xx SOCs, and thus always has a 64-bit phys_addr_t and
resource_size_t. Instead of poking into ioremap internals to work
around a potentially too small resource_size_t just add a BUILD_BUG_ON
to catch such a case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The commit 1c76aa5fb4 ("ALSA: hda/realtek - Allow skipping
spec->init_amp detection") changed the way to assign spec->init_amp
field that specifies the way to initialize the amp. Along with the
change, the commit also replaced a few fixups that set spec->init_amp
in HDA_FIXUP_ACT_PROBE with HDA_FIXUP_ACT_PRE_PROBE. This was rather
aligning to the other fixups, and not supposed to change the actual
behavior.
However, this change turned out to cause a regression on FSC S7020,
which hit exactly the above. The reason was that there is still one
place that overrides spec->init_amp after HDA_FIXUP_ACT_PRE_PROBE
call, namely in alc_ssid_check().
This patch fixes the regression by adding the proper spec->init_amp
override check, i.e. verifying whether it's still ALC_INIT_UNDEFINED.
Fixes: 1c76aa5fb4 ("ALSA: hda/realtek - Allow skipping spec->init_amp detection")
Cc: <stable@vger.kernel.org>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207329
Link: https://lore.kernel.org/r/20200418190639.10082-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Many Focusrite devices supports a limited set of sample rates per
altsetting. These includes audio interfaces with ADAT ports:
- Scarlett 18i6, 18i8 1st gen, 18i20 1st gen;
- Scarlett 18i8 2nd gen, 18i20 2nd gen;
- Scarlett 18i8 3rd gen, 18i20 3rd gen;
- Clarett 2Pre USB, 4Pre USB, 8Pre USB.
Maximum rate is exposed in the last 4 bytes of Format Type descriptor
which has a non-standard bLength = 10.
Tested-by: Alexey Skobkin <skobkin-ru@ya.ru>
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200418175815.12211-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Update D0 <-> D3 sequence to correctly transition hardware and DSP core
from and to D3. On top of that, set SHIM registers to their recommended
defaults during D0 and D3 proceduces as HW does not reset registers for
us.
Connected to:
[alsa-devel][BUG] bdw-rt5650 DSP boot timeout
https://mailman.alsa-project.org/pipermail/alsa-devel/2019-July/153098.html
Github issue ticket reference:
https://github.com/thesofproject/linux/pull/1842
Tested on:
- BDW-Y RVP with rt286
- SAMUS with rt5677
Proposed solution (both in July 2019 and on github):
'Revert "ASoC: Intel: Work around to fix HW d3 potential crash issue"'
is NAKed as it only covers the problem up and actually brings back the
undefined behavior: some registers (e.g.: APLLSE) are describing LPT
offsets rather than WPT ones. In consequence, during power-transitions
driver issues incorrect writes and leaves the regs of interest alone.
Existing patch - the non-revert - does not resolve the HW D3 issue at
all as it ignores the recommended sequence and does not initialize
hardware registers as expected. And thus, leaving things as are is also
unacceptable.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Ross Zwisler <zwisler@google.com>
Link: https://lore.kernel.org/r/20200330194520.13253-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Major regressions were detected by SOF CI on CherryTrail and Broadwell:
[ 25.705750] SSP2-Codec: ASoC: no backend playback stream
[ 27.923378] SSP2-Codec: ASoC: no users playback at close - state
This is root-caused to the introduction of the DAI capability checks
with snd_soc_dai_stream_valid(). Its use in soc-pcm.c makes it a
requirement for all DAIs to report at least a non-zero min_channels
field.
For some reason the SSP structures used for SKL+ did provide this
information but legacy platforms didn't.
Fixes: 9b5db05936 ("ASoC: soc-pcm: dpcm: Only allow playback/capture if supported")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200417172014.11760-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
One significant regression fix is for HD-audio buffer preallocation.
In 5.6 it was set to non-prompt for x86 and forced to 0, but this
turned out to be problematic for some applications, hence it gets
reverted. Distros would need to restore CONFIG_SND_HDA_PREALLOC_SIZE
value to the earlier values they've used in the past.
Other than that, we've received quite a few small fixes for HD-audio
and USB-audio. Most of them are for dealing with the broken TRX40
mobos and the runtime PM without HD-audio codecs.
-----BEGIN PGP SIGNATURE-----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=2Ir9
-----END PGP SIGNATURE-----
Merge tag 'sound-5.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"One significant regression fix is for HD-audio buffer preallocation.
In 5.6 it was set to non-prompt for x86 and forced to 0, but this
turned out to be problematic for some applications, hence it gets
reverted. Distros would need to restore CONFIG_SND_HDA_PREALLOC_SIZE
value to the earlier values they've used in the past.
Other than that, we've received quite a few small fixes for HD-audio
and USB-audio. Most of them are for dealing with the broken TRX40
mobos and the runtime PM without HD-audio codecs"
* tag 'sound-5.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda: call runtime_allow() for all hda controllers
ALSA: hda: Allow setting preallocation again for x86
ALSA: hda: Explicitly permit using autosuspend if runtime PM is supported
ALSA: hda: Skip controller resume if not needed
ALSA: hda: Keep the controller initialization even if no codecs found
ALSA: hda: Release resources at error in delayed probe
ALSA: hda: Honor PM disablement in PM freeze and thaw_noirq ops
ALSA: hda: Don't release card at firmware loading error
ALSA: usb-audio: Check mapping at creating connector controls, too
ALSA: usb-audio: Don't create jack controls for PCM terminals
ALSA: usb-audio: Don't override ignore_ctl_error value from the map
ALSA: usb-audio: Filter error from connector kctl ops, too
ALSA: hda/realtek - Enable the headset mic on Asus FX505DT
ALSA: ctxfi: Remove unnecessary cast in kfree
This fixes two issues in the snd-soc-rcar driver blocking multichannel
HDMI audio out: The parent SSI in a multi-SSI configuration is not
correctly set up and started, and the SSI->HDMI channel mapping is
wrong.
With these patches, the following device tree snippet can be used on an
r8a7795-based platform (Salvator-X) to enable multichannel HDMI audio on
HDMI0:
rsnd_port1: port@1 {
rsnd_endpoint1: endpoint {
remote-endpoint = <&dw_hdmi0_snd_in>;
dai-format = "i2s";
bitclock-master = <&rsnd_endpoint1>;
frame-master = <&rsnd_endpoint1>;
playback = <&ssi0 &ssi1 &ssi2 &ssi9>;
};
};
With a capable receiver attached, all of 2ch (stereo), 6ch (e.g. 5.1)
and 8ch audio output should work.
Matthias Blankertz (2):
ASoC: rsnd: Fix parent SSI start/stop in multi-SSI mode
ASoC: rsnd: Fix HDMI channel mapping for multi-SSI mode
sound/soc/sh/rcar/ssi.c | 8 ++++----
sound/soc/sh/rcar/ssiu.c | 2 +-
2 files changed, 5 insertions(+), 5 deletions(-)
base-commit: 7111951b8d
--
2.26.0
If we don't find any pcm, pcm will point at address at an offset from
the the list head and not a meaningful structure. Fix this by returning
correct pcm if found and NULL if not. Found with coccinelle.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20200415162849.308-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The HDMI?_SEL register maps up to four stereo SSI data lanes onto the
sdata[0..3] inputs of the HDMI output block. The upper half of the
register contains four blocks of 4 bits, with the most significant
controlling the sdata3 line and the least significant the sdata0 line.
The shift calculation has an off-by-one error, causing the parent SSI to
be mapped to sdata3, the first multi-SSI child to sdata0 and so forth.
As the parent SSI transmits the stereo L/R channels, and the HDMI core
expects it on the sdata0 line, this causes no audio to be output when
playing stereo audio on a multichannel capable HDMI out, and
multichannel audio has permutated channels.
Fix the shift calculation to map the parent SSI to sdata0, the first
child to sdata1 etc.
Signed-off-by: Matthias Blankertz <matthias.blankertz@cetitec.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20200415141017.384017-3-matthias.blankertz@cetitec.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The parent SSI of a multi-SSI setup must be fully setup, started and
stopped since it is also part of the playback/capture setup. So only
skip the SSI (as per commit 203cdf51f2 ("ASoC: rsnd: SSI parent cares
SWSP bit") and commit 597b046f0d ("ASoC: rsnd: control SSICR::EN
correctly")) if the SSI is parent outside of a multi-SSI setup.
Signed-off-by: Matthias Blankertz <matthias.blankertz@cetitec.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20200415141017.384017-2-matthias.blankertz@cetitec.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Long series made of a relatively small changes from multiple SOF
contributors. I didn't find a good way to split this series since it
tracks SOF minor ABI changes (backwards-compatible with older firmware
files) and needs to be kept in-order. Future series should be much
shorter.
The main addition is support for an extended firmware manifest, which
helps retrieve capabilities directly from the firmware file instead of
the current IPC mechanism (still supported but will be deprecated).
The IPC is realigned with the firmware, along with type cleanups, and
the DMIC interface is simplified.
The topology changes are mainly about a multi-cpu DAI fix, a new DC
blocking component, better parsing of tuples and new parameters for
ALH (SoundWire) and HDaudio DAIs. New tokens are also added to clarify
the firmware behavior in the case of dependent pipelines, e.g. for
echo reference generation.
Artur Kloniecki (1):
ASoC: SOF: Add XRUN flags field to struct sof_ipc_buffer.
Bard Liao (5):
ASoC: SOF: topology: fix: handle DAI widget connections properly with
multiple CPU DAI's
ASoC: SOF: align sof_ipc_dai_alh_params with FW
ASoC: SOF: topology: Get ALH rate amd channels from topology
ASoC: SOF: topology: fix: parse hda_tokens to &config->hda
ASoC: SOF: topology: Get HDA rate and channels from topology
Jaska Uimonen (2):
ASoC: SOF: topology: stop parsing when all tokens have been found
ASoC: SOF: topology: handle multiple sets of tuple arrays
Karol Trzcinski (6):
ASoC: SOF: Mark get_ext* function ext_hdr arguments as const
ASoC: SOF: Introduce offset in firmware data
ASoC: SOF: Introduce extended manifest
ASoC: SOF: ext_manifest: parse firmware version
ASoC: SOF: ext_manifest: parse windows
ASoC: SOF: ext_manifest: parse compiler version
Pan Xiuli (6):
ASoC: SOF: add probe support extend data
ASoC: SOF: add debug ABI version
ASoC: SOF: change type char to uint8_t in info.h
ASoC: SOF: change type char to uint8_t in trace.h
ASoC: SOF: change type char to uint8_t in topology.h
ASoC: SOF: make sof_ipc_cc_version to fixed length
Sebastiano Carlucci (1):
ASoC: SOF: topology: Add support for DC Blocker
Seppo Ingalsuo (3):
ASoC: SOF: Intel: Fix typo in header file comment text
ASoC: SOF: Intel: Change DMIC load IPC to fixed length
ASoC: SOF: Intel: Rename deprecated DMIC IPC struct field
include/sound/sof.h | 3 +
include/sound/sof/dai-intel.h | 20 +-
include/sound/sof/info.h | 26 ++-
include/sound/sof/topology.h | 16 +-
include/sound/sof/trace.h | 2 +-
include/uapi/sound/sof/abi.h | 2 +-
include/uapi/sound/sof/ext_manifest.h | 91 ++++++++
include/uapi/sound/sof/tokens.h | 8 +
sound/soc/sof/intel/hda-loader.c | 9 +-
sound/soc/sof/loader.c | 226 ++++++++++++++++--
sound/soc/sof/topology.c | 323 ++++++++++++++++----------
11 files changed, 568 insertions(+), 158 deletions(-)
create mode 100644 include/uapi/sound/sof/ext_manifest.h
base-commit: 83b35f4586
--
2.20.1
Daniel Baluta <daniel.baluta@nxp.com>:
From: Daniel Baluta <daniel.baluta@nxp.com>
This patch series adds support for SOF on i.MX8M family. First board
from this family that has a DSP is i.MX8MP.
First 2 patches are trying to fix some compilation issues, the next two
are adding the imx8m support and the last one adds the devicetree
binding.
Changes since v2:
- add reviewed by from Rob to DT patch
- fix ownership for patch 2
Daniel Baluta (3):
ASoC: SOF: imx: Add i.MX8M HW support
ASoC: SOF: Add i.MX8MP device descriptor
dt-bindings: dsp: fsl: Add fsl,imx8mp-dsp entry
Pierre-Louis Bossart (1):
ASoC: SOF: imx: fix undefined reference issue
YueHaibing (1):
ASoC: SOF: imx8: Fix randbuild error
.../devicetree/bindings/dsp/fsl,dsp.yaml | 2 +
sound/soc/sof/imx/Kconfig | 32 +-
sound/soc/sof/imx/Makefile | 2 +
sound/soc/sof/imx/imx8m.c | 279 ++++++++++++++++++
sound/soc/sof/sof-of-dev.c | 14 +
5 files changed, 325 insertions(+), 4 deletions(-)
create mode 100644 sound/soc/sof/imx/imx8m.c
--
2.17.1
Widget's parameters are set in topology and they usually consist of
several different types of tuple arrays like strings, words and bytes.
Here this kind of combination is called a "set".
Lately we've seen more complex widget definitions with multiple
identical sets of tuple arrays. One example is the dmic pdm
configuration, which is currently handled as a special case in token
parsing. This is not scalable for other components with multiple sets.
So add a new function sof_parse_token_sets, which can be used to parse
multiple sets. This function defines the number of sets and an offset to
copy the tokens to correct positions in the destination ipc struct. Old
sof_parse_token function will be a special case of calling
sof_parse_token_sets to parse 1 set with offset 0.
Finally modify the dmic dai link loading to use the new
sof_parse_array_sets to load multiple pdm configs.
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-25-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Optimize the parsing so that it will stop after all required tokens
have been found as there is no reason to continue after that.
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-24-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
FW interface for HDA DAI parameters was extended with information on
sampling rate and channel count in version 3.16. Align kernel header
with the FW change. This change is backwards compatible. Old firmware
will ignore the values.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-23-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Items in hda_tokens are for &config->hda. So fix it to the right
object. This error has been harmless as hda_tokens array was empty.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-22-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
FW will need these params for synchronized playback over multiple
DAIs.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Sławomir Błauciak <slawomir.blauciak@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-21-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch restores the field name to fifo_bits_b since the
legacy firmware compatibility code (for firmware ABI 3.0.0 or earlier)
sets it in sof_link_dmic_load() function in topology.c. Setting of
reserved_2 didn't look appropriate.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-19-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch changes the flexible array member pdm[] into a fixed
array of four that is the max. number of stereo PDM controllers
in the current Intel platforms. The change simplifies DMIC DAI
load code and aligns the IPC with other DAI types.
The change is compatible with old and new firmware with similar
change. The ABI minor version is increased due to change in
IPC headers.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-18-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit adds the enumerations to support the dc blocker component
from SOF.
Signed-off-by: Sebastiano Carlucci <scarlucci@google.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Curtis Malainey <curtis@malainey.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The compiler version and description can be extracted from the
extended manifest content. This information known at build time
does not need to be provided in a mailbox.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The window description can be extracted from the extended manifest
content. This information known at build time does not need to be
provided in a mailbox.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The firmware version can be extracted from the extended
manifest content. This information known at build time
does not need to be provided in a mailbox.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Extended manifest is a place to store build time known firmware
metadata, for example firmware version or used compiler description.
Given information is read on host side before firmware startup.
This part of output binary is located as a first structure in binary
file.
Extended manifest should be skipped in firmware loading routine.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It makes possible to provide extra information to host
before downloading firmware. Extra data should be put
at the beginning of firmware binary.
Exchange is done without any effort on DSP side.
This mechanism will be used in extended manifest.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This pointer can be mark as const to indicate that it is read
only pointer.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, when connecting a DAI widget to the BE CPU DAI, we overwrite
the previous connections. This worked because we only ever had 1 CPU DAI
for each rtd until now. But with multiple CPU DAI's, a new connection
between a BE CPU DAI and the DAI widget should be established without
affecting the previous connections. So, modify the loop to set the
playback/capture widget for the first BE CPU DAI that does not have a
connection established previously.
Fixes: 4a7e26a4d833 ("ASoC: SOF: topology: connect dai widget to all
cpu-dais")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds skeleton support for the audio DSP hardware found on NXP i.MX8M
platform.
There is one notable difference between i.MX8M and i.MX8, which doesn't
allow us to reuse HW support from imx8.c file designed for i.MX8:
On i.MX8M resources (clocks, power, pinctrl, etc) are managed by the
Linux kernel while on i.MX8 resources are managed by a separate
System Controller Firmware. This makes the interface to those resources
completely different.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20200409071832.2039-4-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
make.cross ARCH=mips allyesconfig fails with the following error:
sound/soc/sof/sof-of-dev.o:(.data.sof_of_imx8qxp_desc+0x40): undefined
reference to `sof_imx8x_ops'.
This seems to be a Makefile order issue, solve by using the same
structure as for Intel platforms.
Fixes: f9ad754684 ("ASoC: SOF: imx: fix reverse CONFIG_SND_SOC_SOF_OF
dependency")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20200409071832.2039-3-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
when do randconfig like this:
CONFIG_SND_SOC_SOF_IMX8_SUPPORT=y
CONFIG_SND_SOC_SOF_IMX8=y
CONFIG_SND_SOC_SOF_OF=y
CONFIG_IMX_DSP=m
CONFIG_IMX_SCU=y
there is a link error:
sound/soc/sof/imx/imx8.o: In function 'imx8_send_msg':
imx8.c:(.text+0x380): undefined reference to 'imx_dsp_ring_doorbell'
Select IMX_DSP in SND_SOC_SOF_IMX8_SUPPORT to fix this
Fixes: f9ad754684 ("ASoC: SOF: imx: fix reverse CONFIG_SND_SOC_SOF_OF dependency")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20200409071832.2039-2-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On Baytrail/Cherrytrail, the Atom/SST driver fails miserably:
[ 9.741953] intel_sst_acpi 80860F28:00: FW Version 01.0c.00.01
[ 9.832992] intel_sst_acpi 80860F28:00: FW sent error response 0x40034
[ 9.833019] intel_sst_acpi 80860F28:00: FW alloc failed ret -4
[ 9.833028] intel_sst_acpi 80860F28:00: sst_get_stream returned err -5
[ 9.833033] sst-mfld-platform sst-mfld-platform: ASoC: DAI prepare error: -5
[ 9.833037] Baytrail Audio Port: ASoC: prepare FE Baytrail Audio Port failed
[ 9.853942] intel_sst_acpi 80860F28:00: FW sent error response 0x40034
[ 9.853974] intel_sst_acpi 80860F28:00: FW alloc failed ret -4
[ 9.853984] intel_sst_acpi 80860F28:00: sst_get_stream returned err -5
[ 9.853990] sst-mfld-platform sst-mfld-platform: ASoC: DAI prepare error: -5
[ 9.853994] Baytrail Audio Port: ASoC: prepare FE Baytrail Audio Port failed
Commit b56be800f1 ("ASoC: soc-pcm: call
snd_soc_dai_startup()/shutdown() once") was the initial problematic
commit.
Commit 1ba616bd1a ("ASoC: soc-dai: fix DAI startup/shutdown sequence")
was an attempt to fix things but it does not work on Baytrail,
reverting all changes seems necessary for now.
Fixes: 1ba616bd1a ("ASoC: soc-dai: fix DAI startup/shutdown sequence")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200415030437.23803-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For some reason, the MI2S DAIs do not have channels_min/max defined.
This means that snd_soc_dai_stream_valid() returns false,
i.e. the DAIs have neither valid playback nor capture stream.
It's quite surprising that this ever worked correctly,
but in 5.7-rc1 this is now failing badly: :)
Commit 0e9cf4c452 ("ASoC: pcm: check if cpu-dai supports a given stream")
introduced a check for snd_soc_dai_stream_valid() before calling
hw_params(), which means that the q6i2s_hw_params() function
was never called, eventually resulting in:
qcom-q6afe aprsvc:q6afe:4:4: no line is assigned
... even though "qcom,sd-lines" is set in the device tree.
Commit 9b5db05936 ("ASoC: soc-pcm: dpcm: Only allow playback/capture if supported")
now even avoids creating PCM devices if the stream is not supported,
which means that it is failing even earlier with e.g.:
Primary MI2S: ASoC: no backend playback stream
Avoid all that trouble by adding channels_min/max for the MI2S DAIs.
Fixes: 24c4cbcfac ("ASoC: qdsp6: q6afe: Add q6afe dai driver")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200415150050.616392-1-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
In the function fsl_micfil_probe(), when get irq failed, the function
platform_get_irq() logs an error message, so remove redundant message here.
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Signed-off-by: Shengju Zhang <zhangshengju@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20200415044513.17492-1-tangbin@cmss.chinamobile.com
Signed-off-by: Mark Brown <broonie@kernel.org>
At the moment, PCM devices for DPCM are only created based on the
dpcm_playback/capture parameters of the DAI link, without considering
if the CPU/FE DAI is actually capable of playback/capture.
Normally the dpcm_playback/capture parameter should match the
capabilities of the CPU DAI. However, there is no way to set that
parameter from the device tree (e.g. with simple-audio-card or
qcom sound cards). dpcm_playback/capture are always both set to 1.
This causes problems when the CPU DAI does only support playback
or capture. Attemting to open that PCM device with an unsupported
stream type then results in a null pointer dereference:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000128
Internal error: Oops: 96000044 [#1] PREEMPT SMP
CPU: 3 PID: 1582 Comm: arecord Not tainted 5.7.0-rc1
pc : invalidate_paths_ep+0x30/0xe0
lr : snd_soc_dapm_dai_get_connected_widgets+0x170/0x1a8
Call trace:
invalidate_paths_ep+0x30/0xe0
snd_soc_dapm_dai_get_connected_widgets+0x170/0x1a8
dpcm_path_get+0x38/0xd0
dpcm_fe_dai_open+0x70/0x920
snd_pcm_open_substream+0x564/0x840
snd_pcm_open+0xfc/0x228
snd_pcm_capture_open+0x4c/0x78
snd_open+0xac/0x1a8
...
... because the DAI playback/capture_widget is not set in that case.
We could add checks there to fix the problem (maybe we should
anyway), but much easier is to not expose the device as
playback/capture in the first place. Attemting to use that
device would always fail later anyway.
Add checks for snd_soc_dai_stream_valid() to the DPCM case
to avoid exposing playback/capture if it is not supported.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200415104928.86091-1-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
As mentioned slightly out of patch context in the code, there
is no reset routine for the chip. On boards where the chip is
supplied by a fixed regulator, it might not even be resetted
during (e.g. watchdog) reboot and can be in any state.
If the device is probed with VAG enabled, the driver's probe
routine will generate a loud pop sound when ANA_POWER is
being programmed. Avoid this by properly disabling just the
VAG bit and waiting the required power down time.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Fabio Estevam <festivem@gmail.com>
Link: https://lore.kernel.org/r/20200414181140.145825-1-sebastian.reichel@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Added mixer quirks to allow controlling the internal DSP of the
RME Babyface Pro and its successor Babyface Pro FS.
Signed-off-by: Thomas Ebeling <penguins@bollie.de>
Link: https://lore.kernel.org/r/20200414211019.qprg7whepg2y7nei@bollie.ca9.eu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Before the pci_driver->probe() is called, the pci subsystem calls
runtime_forbid() and runtime_get_sync() on this pci dev, so only call
runtime_put_autosuspend() is not enough to enable the runtime_pm on
this device.
For controllers with vgaswitcheroo feature, the pci/quirks.c will call
runtime_allow() for this dev, then the controllers could enter
rt_idle/suspend/resume, but for non-vgaswitcheroo controllers like
Intel hda controllers, the runtime_pm is not enabled because the
runtime_allow() is not called.
Since it is no harm calling runtime_allow() twice, here let hda
driver call runtime_allow() for all controllers. Then the runtime_pm
is enabled on all controllers after the put_autosuspend() is called.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20200414142725.6020-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Decrease the dmesg verbosity to remove unnecessary logs on SoundWire
platforms, and conversely add more information to help the community
and downstream distros with HDaudio/SOF support (DMIC detection and card
instanciation are the most prevalent issues on GitHub).
Pierre-Louis Bossart (3):
ASoC: codecs: rt1308-sdw: reduce verbosity
ASoC: SOF: Intel: hda: reduce verbosity on SoundWire detection
ASoC: SOF: Intel: hda: log number of microphones detected in NHLT
tables
Ranjani Sridharan (1):
ASoC: soc-core: Add dynamic debug logs in soc_dai_link_sanity_check()
sound/soc/codecs/rt1308-sdw.c | 4 ++--
sound/soc/soc-core.c | 18 +++++++++++++++---
sound/soc/sof/intel/hda.c | 10 ++++++----
3 files changed, 23 insertions(+), 9 deletions(-)
base-commit: dd8e871d4e
--
2.20.1
Hello,
Some devices have a 4-pin jack instead of a 3-pin and currently the
WM8903 configuration is hardcoded to the case of 3-pin jack in the
Tegra's ASoC driver. A new device-tree property is required in order
to convey that hardware has a 4-pin jack, and thus, microphone's
detection needs to be done in a different way.
In particular this is needed for Acer A500 tablet device that has
a 4-pin headset jack, otherwise userspace sees headset instead of
headphones and internal microphone isn't enabled by ALSA UCM rule
when it should be. Please review and apply, thanks in advance.
Dmitry Osipenko (2):
dt-bindings: sound: tegra-wm8903: Document new nvidia,headset property
ASoC: tegra: tegra_wm8903: Support nvidia,headset property
.../devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt | 1 +
sound/soc/tegra/tegra_wm8903.c | 6 +++++-
2 files changed, 6 insertions(+), 1 deletion(-)
--
2.25.1
WSA881x works in PDM mode so the wordlength is fixed, which also makes
the only field "WordLength" in DPN_BlockCtrl1 register a read-only.
Writing to this register will throw up errors with Qualcomm Controller.
So use ro_blockctrl1_reg flag to mark this field as read-only so that
core will not write to this register.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200414110347.23829-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
All error paths in qcom_snd_parse_of() prints more specific error
messages, so silence the one in apq8096_platform_probe() and
sdm845_snd_platform_probe() to avoid spamming the kernel log.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200406003229.2354631-1-bjorn.andersson@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the error message into snd_soc_dapm_new_dai from
dapm_connect_dai_pair, since the two copies are almost identical and
are the only callers.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200409181209.30130-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the following gcc warning:
sound/soc/intel/common/soc-acpi-intel-cml-match.c:116:45: warning:
‘rt1308_2_adr’ defined but not used [-Wunused-const-variable=]
static const struct snd_soc_acpi_adr_device rt1308_2_adr[] = {
^~~~~~~~~~~~
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20200410081117.21319-2-yanaijie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the following gcc warning:
sound/soc/intel/common/soc-acpi-intel-icl-match.c:90:45: warning:
‘rt1308_2_adr’ defined but not used [-Wunused-const-variable=]
static const struct snd_soc_acpi_adr_device rt1308_2_adr[] = {
^~~~~~~~~~~~
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200410081117.21319-1-yanaijie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the following gcc warning:
sound/soc/codecs/wm8900.c:449:38: warning:
‘wm8900_dapm_routput2_control’ defined but not used
[-Wunused-const-variable=]
static const struct snd_kcontrol_new wm8900_dapm_routput2_control =
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/soc/codecs/wm8900.c:446:38: warning:
‘wm8900_dapm_loutput2_control’ defined but not used
[-Wunused-const-variable=]
static const struct snd_kcontrol_new wm8900_dapm_loutput2_control =
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20200407082932.41511-5-yanaijie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the following gcc warning:
sound/soc/codecs/wm8990.c:1309:35: warning: ‘wm8990_regmap’ defined but
not used [-Wunused-const-variable=]
static const struct regmap_config wm8990_regmap = {
^~~~~~~~~~~~~
sound/soc/codecs/wm8990.c:490:38: warning:
‘wm8990_dapm_rxvoice_controls’ defined but not used
[-Wunused-const-variable=]
static const struct snd_kcontrol_new wm8990_dapm_rxvoice_controls[] = {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/soc/codecs/wm8990.c:120:35: warning: ‘out_omix_tlv’ defined but
not used [-Wunused-const-variable=]
static const DECLARE_TLV_DB_SCALE(out_omix_tlv, -600, 0, 0);
^
sound/soc/codecs/wm8990.c:112:35: warning: ‘rec_mix_tlv’ defined but not
used [-Wunused-const-variable=]
static const DECLARE_TLV_DB_SCALE(rec_mix_tlv, -1500, 600, 0);
^
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20200407082932.41511-4-yanaijie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the following gcc warning:
sound/soc/codecs/wm8991.c:480:38: warning:
‘wm8991_dapm_rxvoice_controls’ defined but not used
[-Wunused-const-variable=]
static const struct snd_kcontrol_new wm8991_dapm_rxvoice_controls[] = {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20200407082932.41511-3-yanaijie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the following gcc warning:
sound/soc/codecs/wm8994.c:736:38: warning: ‘wm1811_snd_controls’ defined
but not used [-Wunused-const-variable=]
static const struct snd_kcontrol_new wm1811_snd_controls[] = {
^~~~~~~~~~~~~~~~~~~
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20200407082932.41511-2-yanaijie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The microphone-jack state needs to be masked in a case of a 4-pin jack
when microphone and ground pins are shorted. Presence of nvidia,headset
tells that WM8903 CODEC driver should mask microphone's status if short
circuit is detected, i.e headphones are inserted.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20200330204011.18465-3-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add DMIC endpoint widget and route to make DMIC DAPM routes completed,
to make DAPM Power Management works for DMIC streams.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200409185827.16255-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Init codecs which belong to the same group id on all links.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200409185827.16255-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds the support of Intel Elkhart Lake with
Realtek rt5660 codec.
Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: Muhammad Nazif Bin Mohd Borhan <muhammad.nazif.mohd.borhan@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200409185827.16255-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On some Lenovo and HP laptops, if both codec driver and SOF driver
are in runtime suspend mode, we plug a headset to the audio jack,
the headphone could be detected but Mic couldn't.
That is because when plugging, the headphone triggers a unsol event
first, and about 0.7s later (on the Lenovo X1 Carbon 7th), the Mic
triggers a unsol event. But if the codec driver enters runtime suspend
within 0.7s, the Mic can't trigger the unsol event.
If we don't set autosuspend_delay to a non-zero value for the hda codec
driver, it will enter runtime suspend immediately after the headphone
triggers the unsol event.
Follow the sequence of legacy hda driver and set a autosuspend delay
of 1sec after card registration (refer to pci/hda/hda_intel.c and
pci/hda/hda_codec.c).
Co-developed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Co-developed-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Clarex Zhou <clarex.zhou@intel.com>
Link: https://lore.kernel.org/r/20200409185827.16255-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add dmic16k BE dailink for keyword detection support, FE is
added in topology tplg file.
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200409185827.16255-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
No-one is using cpu_dai/codec_dai/cpu_dais/codec_dais.
Let's remove these from snd_soc_pcm_runtime
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87eetabok4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_new_pcm_runtime() setups rtd, but code is very random.
This patch tidyup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87ftdqbokh.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
rtd->cpu_dais/codec_dais are set at soc_new_pcm_runtime().
rtd->num_cpus/codecs should be set there.
This patch do it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87h7y6bol1.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When a platform device is created successfully but the machine driver
probe fails due to errors with missing components during the card bind
stage, no error is propagated or logged. To help flag such problems,
add a dynamic debug log.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200409184416.15591-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Log the information extracted from NHLT tables to help support users
who report non-functional digital mics with SOF.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200409184416.15591-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
No need to report an error when SoundWire is not detected (not present
in hardware or not exposed in ACPI). Move to dev_dbg to state that
SoundWire is skipped.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200409184416.15591-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
These messages are generated at each enumeration, this is
overkill. Move to dev_dbg
[ 86.481709] rt1308 sdw:1:25d:1308:0: rt1308_io_init m_btl_l=0xffee, m_btl_r=0xffff
[ 86.481714] rt1308 sdw:1:25d:1308:0: rt1308_io_init c_btl_l=0x28c, c_btl_r=0x113
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200409184416.15591-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove unnecessary parentheses around the right hand side of an assignment
and align the code.
Signed-off-by: Payal Kshirsagar <payalskshirsagar1234@gmail.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200409184853.15896-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove unneeded temporary local variables and their declarations.
Change suggested by coccinelle.
Signed-off-by: Payal Kshirsagar <payalskshirsagar1234@gmail.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200409184853.15896-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If probe fails after enabling the regulators regulator_put is called for
each supply without having them disabled before. This produces some
warnings like
WARNING: CPU: 0 PID: 90 at drivers/regulator/core.c:2044 _regulator_put.part.0+0x154/0x15c
[<c010f7a8>] (unwind_backtrace) from [<c010c544>] (show_stack+0x10/0x14)
[<c010c544>] (show_stack) from [<c012b640>] (__warn+0xd0/0xf4)
[<c012b640>] (__warn) from [<c012b9b4>] (warn_slowpath_fmt+0x64/0xc4)
[<c012b9b4>] (warn_slowpath_fmt) from [<c04c4064>] (_regulator_put.part.0+0x154/0x15c)
[<c04c4064>] (_regulator_put.part.0) from [<c04c4094>] (regulator_put+0x28/0x38)
[<c04c4094>] (regulator_put) from [<c04c40cc>] (regulator_bulk_free+0x28/0x38)
[<c04c40cc>] (regulator_bulk_free) from [<c0579b2c>] (release_nodes+0x1d0/0x22c)
[<c0579b2c>] (release_nodes) from [<c05756dc>] (really_probe+0x108/0x34c)
[<c05756dc>] (really_probe) from [<c0575aec>] (driver_probe_device+0xb8/0x16c)
[<c0575aec>] (driver_probe_device) from [<c0575d40>] (device_driver_attach+0x58/0x60)
[<c0575d40>] (device_driver_attach) from [<c0575da0>] (__driver_attach+0x58/0xcc)
[<c0575da0>] (__driver_attach) from [<c0573978>] (bus_for_each_dev+0x78/0xc0)
[<c0573978>] (bus_for_each_dev) from [<c0574b5c>] (bus_add_driver+0x188/0x1e0)
[<c0574b5c>] (bus_add_driver) from [<c05768b0>] (driver_register+0x74/0x108)
[<c05768b0>] (driver_register) from [<c061ab7c>] (i2c_register_driver+0x3c/0x88)
[<c061ab7c>] (i2c_register_driver) from [<c0102df8>] (do_one_initcall+0x58/0x250)
[<c0102df8>] (do_one_initcall) from [<c01a91bc>] (do_init_module+0x60/0x244)
[<c01a91bc>] (do_init_module) from [<c01ab5a4>] (load_module+0x2180/0x2540)
[<c01ab5a4>] (load_module) from [<c01abbd4>] (sys_finit_module+0xd0/0xe8)
[<c01abbd4>] (sys_finit_module) from [<c01011e0>] (__sys_trace_return+0x0/0x20)
Fixes: 3fd6e7d9a1 (ASoC: tas571x: New driver for TI TAS571x power amplifiers)
Signed-off-by: Philipp Puschmann <p.puschmann@pironex.de>
Link: https://lore.kernel.org/r/20200414112754.3365406-1-p.puschmann@pironex.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Refactoring was done to factor out the linking of DAI widgets into
a helper function, dapm_add_valid_dai_widget. However when this was
done, a regression was introduced for CODEC to CODEC links. It was
over looked that the playback and capture variables persisted across
all CODEC DAIs being processed, which ensured that the special DAI
widget that is added for CODEC to CODEC links was only created once.
This bug causes kernel panics during DAPM shutdown.
To stick with the spirit of the original refactoring whilst fixing the
issue, variables to hold the DAI widgets are added to snd_soc_dai_link.
Furthermore the dapm_add_valid_dai_widget function is renamed to
dapm_connect_dai_pair, the function only adds DAI widgets in the CODEC
to CODEC case and its primary job is to add routes connecting two DAI
widgets, making the original name quite misleading.
Fixes: 6c4b13b51a ("ASoC: Add dapm_add_valid_dai_widget helper")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200409181209.30130-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 450312b640 ("ASoC: soc-core: remove DAI suspend/resume")
removed the DAI side suspend/resume hooks and switched entirely to
component suspend/resume. However the Samsung SoC s3c-i2s-v2 driver was
not updated.
Move the suspend/resume hooks from s3c-i2s-v2.c to s3c2412-i2s.c while
changing dai to component which allows to keep the struct
snd_soc_component_driver const.
This fixes build errors:
sound/soc/samsung/s3c-i2s-v2.c: In function ‘s3c_i2sv2_register_component’:
sound/soc/samsung/s3c-i2s-v2.c:730:9: error: ‘struct snd_soc_dai_driver’ has no member named ‘suspend’
dai_drv->suspend = s3c2412_i2s_suspend;
Reported-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 450312b640 ("ASoC: soc-core: remove DAI suspend/resume")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200413124548.28197-1-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The commit c31427d0d2 ("ALSA: hda: No preallocation on x86
platforms") changed CONFIG_SND_HDA_PREALLOC_SIZE setup and its default
to zero for x86, as the preallocation should work almost all cases.
However, this expectation was too naive; some applications try to
allocate as the max buffer size as possible, and it leads to the
memory exhaustion. More badly, the commit changed the kconfig no
longer adjustable for x86, so you can't fix it statically (although it
can be still adjusted via procfs).
So, practically seen, it's more recommended to set a reasonable limit
for x86, too. This patch follows to that experience, and changes the
default to 2048 and allow the kconfig adjustable again.
Fixes: c31427d0d2 ("ALSA: hda: No preallocation on x86 platforms")
Cc: <stable@vger.kernel.org>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207223
Link: https://lore.kernel.org/r/20200413201919.24241-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Lubomir Rintel