Commit Graph

115 Commits

Author SHA1 Message Date
Aneesh Kumar K.V c2b4d8b741 powerpc/mm/hash64: Increase the VA range
This patch increases the max virtual (effective) address value to 4PB.
With 4K page size config we continue to limit ourself to 64TB.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[mpe: Keep the H_PGTABLE_RANGE test, update it to work]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-31 00:10:38 +11:00
Aneesh Kumar K.V a5d4b5891c powerpc/mm: Fixup tlbie vs store ordering issue on POWER9
On POWER9, under some circumstances, a broadcast TLB invalidation
might complete before all previous stores have drained, potentially
allowing stale stores from becoming visible after the invalidation.
This works around it by doubling up those TLB invalidations which was
verified by HW to be sufficient to close the risk window.

This will be documented in a yet-to-be-published errata.

Fixes: 1a472c9dba ("powerpc/mm/radix: Add tlbflush routines")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[mpe: Enable the feature in the DT CPU features code for all Power9,
      rename the feature to CPU_FTR_P9_TLBIE_BUG per benh.]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-23 20:48:03 +11:00
Aneesh Kumar K.V fae2211697 powerpc/mm: Fix crashes with 16G huge pages
To support memory keys, we moved the hash pte slot information to the
second half of the page table. This was ok with PTE entries at level
4 (PTE page) and level 3 (PMD). We already allocate larger page table
pages at those levels to accomodate extra details. For level 4 we
already have the extra space which was used to track 4k hash page
table entry details and at level 3 the extra space was allocated to
track the THP details.

With hugetlbfs PTE, we used this extra space at the PMD level to store
the slot details. But we also support hugetlbfs PTE at PUD level for
16GB pages and PUD level page didn't allocate extra space. This
resulted in memory corruption.

Fix this by allocating extra space at PUD level when HUGETLB is
enabled.

Fixes: bf9a95f9a6 ("powerpc: Free up four 64K PTE bits in 64K backed HPTE pages")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-02-13 22:37:47 +11:00
Alexey Kardashevskiy 62e984ddfd powerpc/mm: Flush radix process translations when setting MMU type
Radix guests do normally invalidate process-scoped translations when a
new pid is allocated but migrated guests do not invalidate these so
migrated guests crash sometime, especially easy to reproduce with
migration happening within first 10 seconds after the guest boot start
on the same machine.

This adds the "Invalidate process-scoped translations" flush to fix
radix guests migration.

Fixes: 2ee13be34b ("KVM: PPC: Book3S HV: Update kvmppc_set_arch_compat() for ISA v3.00")
Cc: stable@vger.kernel.org # v4.10+
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-02-13 22:37:47 +11:00
Christophe Leroy 812fadcb94 powerpc/mm: extend _PAGE_PRIVILEGED to all CPUs
commit ac29c64089 ("powerpc/mm: Replace _PAGE_USER with
_PAGE_PRIVILEGED") introduced _PAGE_PRIVILEGED for BOOK3S/64

This patch generalises _PAGE_PRIVILEGED for all CPUs, allowing
to have either _PAGE_PRIVILEGED or _PAGE_USER or both.

PPC_8xx has a _PAGE_SHARED flag which is set for and only for
all non user pages. Lets rename it _PAGE_PRIVILEGED to remove
confusion as it has nothing to do with Linux shared pages.

On BookE, there's a _PAGE_BAP_SR which has to be set for kernel
pages: defining _PAGE_PRIVILEGED as _PAGE_BAP_SR will make
this generic

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-16 23:47:13 +11:00
Linus Torvalds 5b0e2cb020 powerpc updates for 4.15
Non-highlights:
 
  - Five fixes for the >128T address space handling, both to fix bugs in our
    implementation and to bring the semantics exactly into line with x86.
 
 Highlights:
 
  - Support for a new OPAL call on bare metal machines which gives us a true NMI
    (ie. is not masked by MSR[EE]=0) for debugging etc.
 
  - Support for Power9 DD2 in the CXL driver.
 
  - Improvements to machine check handling so that uncorrectable errors can be
    reported into the generic memory_failure() machinery.
 
  - Some fixes and improvements for VPHN, which is used under PowerVM to notify
    the Linux partition of topology changes.
 
  - Plumbing to enable TM (transactional memory) without suspend on some Power9
    processors (PPC_FEATURE2_HTM_NO_SUSPEND).
 
  - Support for emulating vector loads form cache-inhibited memory, on some
    Power9 revisions.
 
  - Disable the fast-endian switch "syscall" by default (behind a CONFIG), we
    believe it has never had any users.
 
  - A major rework of the API drivers use when initiating and waiting for long
    running operations performed by OPAL firmware, and changes to the
    powernv_flash driver to use the new API.
 
  - Several fixes for the handling of FP/VMX/VSX while processes are using
    transactional memory.
 
  - Optimisations of TLB range flushes when using the radix MMU on Power9.
 
  - Improvements to the VAS facility used to access coprocessors on Power9, and
    related improvements to the way the NX crypto driver handles requests.
 
  - Implementation of PMEM_API and UACCESS_FLUSHCACHE for 64-bit.
 
 Thanks to:
   Alexey Kardashevskiy, Alistair Popple, Allen Pais, Andrew Donnellan, Aneesh
   Kumar K.V, Arnd Bergmann, Balbir Singh, Benjamin Herrenschmidt, Breno Leitao,
   Christophe Leroy, Christophe Lombard, Cyril Bur, Frederic Barrat, Gautham R.
   Shenoy, Geert Uytterhoeven, Guilherme G. Piccoli, Gustavo Romero, Haren
   Myneni, Joel Stanley, Kamalesh Babulal, Kautuk Consul, Markus Elfring, Masami
   Hiramatsu, Michael Bringmann, Michael Neuling, Michal Suchanek, Naveen N. Rao,
   Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Pedro Miraglia Franco de
   Carvalho, Philippe Bergheaud, Sandipan Das, Seth Forshee, Shriya, Stephen
   Rothwell, Stewart Smith, Sukadev Bhattiprolu, Tyrel Datwyler, Vaibhav Jain,
   Vaidyanathan Srinivasan, William A. Kennington III.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJaDXGuAAoJEFHr6jzI4aWAEqwP/0TA35KFAK6wqfkCf67z4q+O
 I+5piI4eDV4jdCakfoIN1JfjhQRULNePSoCHTccan30mu/bm30p69xtOLL2/h5xH
 Mhz/eDBAOo0lrT20nyZfYMW3FnM66wnNf++qJ0O+8L052r4WOB02J0k1uM1ST01D
 5Lb5mUoxRLRzCgKRYAYWJifn+IFPUB9NMsvMTym94krAFlIjIzMEQXhDoln+jJMr
 QmY5f1BTA/fLfXobn0zwoc/C1oa2PUtxd+rxbwGrLoZ6G843mMqUi90SMr5ybhXp
 RzepnBTj4by3vOsnk/X1mANyaZfLsunp75FwnjHdPzKrAS/TuPp8D/iSxxE/PzEq
 cLwJFBnFXSgQMefDErXxhHSDz2dAg5r14rsTpDcq2Ko8TPV4rPsuSfmbd9Txekb0
 yWHsjoJUBBMl2QcWqIHl+AlV8j1RklF6solcTBcGnH1CZJMfa05VKXV7xGEvOHa0
 RJ+/xPyR9KjoB/SUp++9Vmx/M6SwQYFOJlr3Zpg9LNtR8WpoPYu1E6eO+u1Hhzny
 eJqaNstH+i+VdY9eqszkAsEBh8o9M/+b+7Wx7TetvU+v368CbXtgFYs9qy2oZjPF
 t9sY/BHaHZ8eZ7I00an77a0fVV5B1PVASUtIz5CqkwGpMvX6Z6W2K/XUUFI61kuu
 E06HS6Ht8UPJAzrAPUMl
 =Rq81
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "A bit of a small release, I suspect in part due to me travelling for
  KS. But my backlog of patches to review is smaller than usual, so I
  think in part folks just didn't send as much this cycle.

  Non-highlights:

   - Five fixes for the >128T address space handling, both to fix bugs
     in our implementation and to bring the semantics exactly into line
     with x86.

  Highlights:

   - Support for a new OPAL call on bare metal machines which gives us a
     true NMI (ie. is not masked by MSR[EE]=0) for debugging etc.

   - Support for Power9 DD2 in the CXL driver.

   - Improvements to machine check handling so that uncorrectable errors
     can be reported into the generic memory_failure() machinery.

   - Some fixes and improvements for VPHN, which is used under PowerVM
     to notify the Linux partition of topology changes.

   - Plumbing to enable TM (transactional memory) without suspend on
     some Power9 processors (PPC_FEATURE2_HTM_NO_SUSPEND).

   - Support for emulating vector loads form cache-inhibited memory, on
     some Power9 revisions.

   - Disable the fast-endian switch "syscall" by default (behind a
     CONFIG), we believe it has never had any users.

   - A major rework of the API drivers use when initiating and waiting
     for long running operations performed by OPAL firmware, and changes
     to the powernv_flash driver to use the new API.

   - Several fixes for the handling of FP/VMX/VSX while processes are
     using transactional memory.

   - Optimisations of TLB range flushes when using the radix MMU on
     Power9.

   - Improvements to the VAS facility used to access coprocessors on
     Power9, and related improvements to the way the NX crypto driver
     handles requests.

   - Implementation of PMEM_API and UACCESS_FLUSHCACHE for 64-bit.

  Thanks to: Alexey Kardashevskiy, Alistair Popple, Allen Pais, Andrew
  Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Balbir Singh, Benjamin
  Herrenschmidt, Breno Leitao, Christophe Leroy, Christophe Lombard,
  Cyril Bur, Frederic Barrat, Gautham R. Shenoy, Geert Uytterhoeven,
  Guilherme G. Piccoli, Gustavo Romero, Haren Myneni, Joel Stanley,
  Kamalesh Babulal, Kautuk Consul, Markus Elfring, Masami Hiramatsu,
  Michael Bringmann, Michael Neuling, Michal Suchanek, Naveen N. Rao,
  Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Pedro Miraglia
  Franco de Carvalho, Philippe Bergheaud, Sandipan Das, Seth Forshee,
  Shriya, Stephen Rothwell, Stewart Smith, Sukadev Bhattiprolu, Tyrel
  Datwyler, Vaibhav Jain, Vaidyanathan Srinivasan, and William A.
  Kennington III"

* tag 'powerpc-4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (151 commits)
  powerpc/64s: Fix Power9 DD2.0 workarounds by adding DD2.1 feature
  powerpc/64s: Fix masking of SRR1 bits on instruction fault
  powerpc/64s: mm_context.addr_limit is only used on hash
  powerpc/64s/radix: Fix 128TB-512TB virtual address boundary case allocation
  powerpc/64s/hash: Allow MAP_FIXED allocations to cross 128TB boundary
  powerpc/64s/hash: Fix fork() with 512TB process address space
  powerpc/64s/hash: Fix 128TB-512TB virtual address boundary case allocation
  powerpc/64s/hash: Fix 512T hint detection to use >= 128T
  powerpc: Fix DABR match on hash based systems
  powerpc/signal: Properly handle return value from uprobe_deny_signal()
  powerpc/fadump: use kstrtoint to handle sysfs store
  powerpc/lib: Implement UACCESS_FLUSHCACHE API
  powerpc/lib: Implement PMEM API
  powerpc/powernv/npu: Don't explicitly flush nmmu tlb
  powerpc/powernv/npu: Use flush_all_mm() instead of flush_tlb_mm()
  powerpc/powernv/idle: Round up latency and residency values
  powerpc/kprobes: refactor kprobe_lookup_name for safer string operations
  powerpc/kprobes: Blacklist emulate_update_regs() from kprobes
  powerpc/kprobes: Do not disable interrupts for optprobes and kprobes_on_ftrace
  powerpc/kprobes: Disable preemption before invoking probe handler for optprobes
  ...
2017-11-16 12:47:46 -08:00
Mel Gorman 2d4894b5d2 mm: remove cold parameter from free_hot_cold_page*
Most callers users of free_hot_cold_page claim the pages being released
are cache hot.  The exception is the page reclaim paths where it is
likely that enough pages will be freed in the near future that the
per-cpu lists are going to be recycled and the cache hotness information
is lost.  As no one really cares about the hotness of pages being
released to the allocator, just ditch the parameter.

The APIs are renamed to indicate that it's no longer about hot/cold
pages.  It should also be less confusing as there are subtle differences
between them.  __free_pages drops a reference and frees a page when the
refcount reaches zero.  free_hot_cold_page handled pages whose refcount
was already zero which is non-obvious from the name.  free_unref_page
should be more obvious.

No performance impact is expected as the overhead is marginal.  The
parameter is removed simply because it is a bit stupid to have a useless
parameter copied everywhere.

[mgorman@techsingularity.net: add pages to head, not tail]
  Link: http://lkml.kernel.org/r/20171019154321.qtpzaeftoyyw4iey@techsingularity.net
Link: http://lkml.kernel.org/r/20171018075952.10627-8-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15 18:21:06 -08:00
Michael Ellerman 4e00374704 powerpc/64s: Replace CONFIG_PPC_STD_MMU_64 with CONFIG_PPC_BOOK3S_64
CONFIG_PPC_STD_MMU_64 indicates support for the "standard" powerpc MMU
on 64-bit CPUs. The "standard" MMU refers to the hash page table MMU
found in "server" processors, from IBM mainly.

Currently CONFIG_PPC_STD_MMU_64 is == CONFIG_PPC_BOOK3S_64. While it's
annoying to have two symbols that always have the same value, it's not
quite annoying enough to bother removing one.

However with the arrival of Power9, we now have the situation where
CONFIG_PPC_STD_MMU_64 is enabled, but the kernel is running using the
Radix MMU - *not* the "standard" MMU. So it is now actively confusing
to use it, because it implies that code is disabled or inactive when
the Radix MMU is in use, however that is not necessarily true.

So s/CONFIG_PPC_STD_MMU_64/CONFIG_PPC_BOOK3S_64/, and do some minor
formatting updates of some of the affected lines.

This will be a pain for backports, but c'est la vie.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-06 16:48:14 +11:00
Michael Ellerman 63ee9b2ff9 powerpc/mm/book3s64: Make KERN_IO_START a variable
Currently KERN_IO_START is defined as:

 #define KERN_IO_START  (KERN_VIRT_START + (KERN_VIRT_SIZE >> 1))

Although it looks like a constant, both the components are actually
variables, to allow us to have a different value between Radix and
Hash with a single kernel.

However that still requires both Radix and Hash to place the kernel IO
region at the same location relative to the start and end of the
kernel virtual region (namely 1/2 way through it), and we'd like to
change that.

So split KERN_IO_START out into its own variable, and initialise it
for Radix and Hash. In the medium term we should be able to
reconsolidate this, by doing a more involved rearrangement of the
location of the regions.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-08 19:37:04 +10:00
Michael Ellerman 029d9252b1 powerpc/mm: Mark __init memory no-execute when STRICT_KERNEL_RWX=y
Currently even with STRICT_KERNEL_RWX we leave the __init text marked
executable after init, which is bad.

Add a hook to mark it NX (no-execute) before we free it, and implement
it for radix and hash.

Note that we use __init_end as the end address, not _einittext,
because overlaps_kernel_text() uses __init_end, because there are
additional executable sections other than .init.text between
__init_begin and __init_end.

Tested on radix and hash with:

  0:mon> p $__init_begin
  *** 400 exception occurred

Fixes: 1e0fc9d1eb ("powerpc/Kconfig: Enable STRICT_KERNEL_RWX for some configs")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-07-18 19:54:24 +10:00
Balbir Singh 7614ff3272 powerpc/mm/radix: Implement STRICT_RWX/mark_rodata_ro() for Radix
The Radix linear mapping code (create_physical_mapping()) tries to use
the largest page size it can at each step. Currently the only reason
it steps down to a smaller page size is if the start addr is
unaligned (never happens in practice), or the end of memory is not
aligned to a huge page boundary.

To support STRICT_RWX we need to break the mapping at __init_begin,
so that the text and rodata prior to that can be marked R_X and the
regular pages after can be marked RW.

Having done that we can now implement mark_rodata_ro() for Radix,
knowing that we won't need to split any mappings.

Signed-off-by: Balbir Singh <bsingharora@gmail.com>
[mpe: Split down to PAGE_SIZE, not 2MB, rewrite change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-07-04 11:37:39 +10:00
Balbir Singh cd65d69713 powerpc/mm/hash: Implement mark_rodata_ro() for hash
With hash we update the bolted pte to mark it read-only. We rely
on the MMU_FTR_KERNEL_RO to generate the correct permissions
for read-only text. The radix implementation just prints a warning
in this implementation

Signed-off-by: Balbir Singh <bsingharora@gmail.com>
[mpe: Make the warning louder when we don't have MMU_FTR_KERNEL_RO]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-07-04 11:35:16 +10:00
Oliver O'Halloran ebd3119793 powerpc/mm: Add devmap support for ppc64
Add support for the devmap bit on PTEs and PMDs for PPC64 Book3S.  This
is used to differentiate device backed memory from transparent huge
pages since they are handled in more or less the same manner by the core
mm code.

Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-07-02 20:40:28 +10:00
Balbir Singh 0428491cba powerpc/mm: Trace tlbie(l) instructions
Add a trace point for tlbie(l) (Translation Lookaside Buffer Invalidate
Entry (Local)) instructions.

The tlbie instruction has changed over the years, so not all versions
accept the same operands. Use the ISA v3 field operands because they are
the most verbose, we may change them in future.

Example output:

  qemu-system-ppc-5371  [016]  1412.369519: tlbie:
  	tlbie with lpid 0, local 1, rb=67bd8900174c11c1, rs=0, ric=0 prs=0 r=0

Signed-off-by: Balbir Singh <bsingharora@gmail.com>
[mpe: Add some missing trace_tlbie()s, reword change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-06-23 21:14:49 +10:00
Balbir Singh de3b87611d powerpc/mm/book(e)(3s)/64: Add page table accounting
Introduce a helper pgtable_gfp_flags() which
just returns the current gfp flags and adds
__GFP_ACCOUNT to account for page table allocation.
The generic helper is added to include/asm/pgalloc.h
and has two variants - WARNING ugly bits ahead

1. If the header is included from a module, no check
for mm == &init_mm is done, since init_mm is not
exported
2. For kernel includes, the check is done and required
see (3e79ec7 arch: x86: charge page tables to kmemcg)

The fundamental assumption is that no module should be
doing pgd/pud/pmd and pte alloc's on behalf of init_mm
directly.

NOTE: This adds an overhead to pmd/pud/pgd allocations
similar to x86.  The other alternative was to implement
pmd_alloc_kernel/pud_alloc_kernel and pgd_alloc_kernel
with their offset variants.

For 4k page size, pte_alloc_one no longer calls
pte_alloc_one_kernel.

Signed-off-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-06-05 19:03:10 +10:00
Michael Ellerman da0e7e6276 Merge branch 'topic/ppc-kvm' into next
Merge the topic branch we're sharing with the kvm-ppc tree.
2017-02-14 17:18:29 +11:00
Paul Mackerras 16ed141677 powerpc/64: Make type of partition table flush depend on partition type
When changing a partition table entry on POWER9, we do a particular
form of the tlbie instruction which flushes all TLBs and caches of
the partition table for a given logical partition ID (LPID).
This instruction has a field in the instruction word, labelled R
(radix), which should be 1 if the partition was previously a radix
partition and 0 if it was a HPT partition.  This implements that
logic.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-31 19:11:46 +11:00
Alistair Popple 1d0761d255 powerpc/powernv: Initialise nest mmu
POWER9 contains an off core mmu called the nest mmu (NMMU). This is
used by other hardware units on the chip to translate virtual
addresses into real addresses. The unit attempting an address
translation provides the majority of the context required for the
translation request except for the base address of the partition table
(ie. the PTCR) which needs to be programmed into the NMMU.

This patch adds a call to OPAL to set the PTCR for the nest mmu in
opal_init().

Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-30 20:24:33 +11:00
Paul Mackerras 9d66195807 powerpc/64: Provide functions for accessing POWER9 partition table
POWER9 requires the host to set up a partition table, which is a
table in memory indexed by logical partition ID (LPID) which
contains the pointers to page tables and process tables for the
host and each guest.

This factors out the initialization of the partition table into
a single function.  This code was previously duplicated between
hash_utils_64.c and pgtable-radix.c.

This provides a function for setting a partition table entry,
which is used in early MMU initialization, and will be used by
KVM whenever a guest is created.  This function includes a tlbie
instruction which will flush all TLB entries for the LPID and
all caches of the partition table entry for the LPID, across the
system.

This also moves a call to memblock_set_current_limit(), which was
in radix_init_partition_table(), but has nothing to do with the
partition table.  By analogy with the similar code for hash, the
call gets moved to near the end of radix__early_init_mmu().  It
now gets called when running as a guest, whereas previously it
would only be called if the kernel is running as the host.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-11-23 10:32:11 +11:00
Michal Hocko 32d6bd9059 tree wide: get rid of __GFP_REPEAT for order-0 allocations part I
This is the third version of the patchset previously sent [1].  I have
basically only rebased it on top of 4.7-rc1 tree and dropped "dm: get
rid of superfluous gfp flags" which went through dm tree.  I am sending
it now because it is tree wide and chances for conflicts are reduced
considerably when we want to target rc2.  I plan to send the next step
and rename the flag and move to a better semantic later during this
release cycle so we will have a new semantic ready for 4.8 merge window
hopefully.

Motivation:

While working on something unrelated I've checked the current usage of
__GFP_REPEAT in the tree.  It seems that a majority of the usage is and
always has been bogus because __GFP_REPEAT has always been about costly
high order allocations while we are using it for order-0 or very small
orders very often.  It seems that a big pile of them is just a
copy&paste when a code has been adopted from one arch to another.

I think it makes some sense to get rid of them because they are just
making the semantic more unclear.  Please note that GFP_REPEAT is
documented as

* __GFP_REPEAT: Try hard to allocate the memory, but the allocation attempt

* _might_ fail.  This depends upon the particular VM implementation.
  while !costly requests have basically nofail semantic.  So one could
  reasonably expect that order-0 request with __GFP_REPEAT will not loop
  for ever.  This is not implemented right now though.

I would like to move on with __GFP_REPEAT and define a better semantic
for it.

  $ git grep __GFP_REPEAT origin/master | wc -l
  111
  $ git grep __GFP_REPEAT | wc -l
  36

So we are down to the third after this patch series.  The remaining
places really seem to be relying on __GFP_REPEAT due to large allocation
requests.  This still needs some double checking which I will do later
after all the simple ones are sorted out.

I am touching a lot of arch specific code here and I hope I got it right
but as a matter of fact I even didn't compile test for some archs as I
do not have cross compiler for them.  Patches should be quite trivial to
review for stupid compile mistakes though.  The tricky parts are usually
hidden by macro definitions and thats where I would appreciate help from
arch maintainers.

[1] http://lkml.kernel.org/r/1461849846-27209-1-git-send-email-mhocko@kernel.org

This patch (of 19):

__GFP_REPEAT has a rather weak semantic but since it has been introduced
around 2.6.12 it has been ignored for low order allocations.  Yet we
have the full kernel tree with its usage for apparently order-0
allocations.  This is really confusing because __GFP_REPEAT is
explicitly documented to allow allocation failures which is a weaker
semantic than the current order-0 has (basically nofail).

Let's simply drop __GFP_REPEAT from those places.  This would allow to
identify place which really need allocator to retry harder and formulate
a more specific semantic for what the flag is supposed to do actually.

Link: http://lkml.kernel.org/r/1464599699-30131-2-git-send-email-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Liqin <liqin.linux@gmail.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com> [for tile]
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: John Crispin <blogic@openwrt.org>
Cc: Lennox Wu <lennox.wu@gmail.com>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-06-24 17:23:52 -07:00
Aneesh Kumar K.V 6a1ea36260 powerpc/mm: THP is only available on hash64 as of now
Only code movement in this patch. No functionality change.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11 21:53:56 +10:00
Aneesh Kumar K.V 5ed7ecd08a powerpc/mm: pte_frag abstraction
In this patch we make the number of pte fragments per level 4 page table
page a variable. Radix level 4 table size is 256 bytes and hence we can
have 256 fragments per level 4 page. We don't update the fragment count
in this patch. We need to do performance measurements to find the right
value for fragment count.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11 21:53:54 +10:00
Aneesh Kumar K.V d6a9996e84 powerpc/mm: vmalloc abstraction in preparation for radix
The vmalloc range differs between hash and radix config. Hence make
VMALLOC_START and related constants a variable which will be runtime
initialized depending on whether hash or radix mode is active.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[mpe: Fix missing init of ioremap_bot in pgtable_64.c for ppc64e]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11 21:53:53 +10:00
Aneesh Kumar K.V a2f41eb992 powerpc/mm: Add radix pgalloc details
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11 21:53:51 +10:00
Aneesh Kumar K.V 934828edfa powerpc/mm: Make 4K and 64K use pte_t for pgtable_t
This patch switches 4K Linux page size config to use pte_t * type
instead of struct page * for pgtable_t. This simplifies the code a lot
and helps in consolidating both 64K and 4K page allocator routines. The
changes should not have any impact, because we already store physical
address in the upper level page table tree and that implies we already
do struct page * to physical address conversion.

One change to note here is we move the pgtable_page_dtor() call for
nohash to pte_fragment_free_mm(). The nohash related change is due to
the related changes in pgtable_64.c.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11 21:53:51 +10:00
Aneesh Kumar K.V 74701d5947 powerpc/mm: Rename function to indicate we are allocating fragments
Only code cleanup. No functionality change.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11 21:53:50 +10:00
Aneesh Kumar K.V dd1842a2a4 powerpc/mm: Make page table size a variable
Radix and hash MMU models support different page table sizes. Make
the #defines a variable so that existing code can work with variable
sizes.

Slice related code is only used by hash, so use hash constants there. We
will replicate some of the boundary conditions with resepct to TASK_SIZE
using radix values too. Right now we do boundary condition check using
hash constants.

Swapper pgdir size is initialized in asm code. We select the max pgd
size to keep it simple. For now we select hash pgdir. When adding radix
we will switch that to radix pgdir which is 64K.

BUILD_BUG_ON check which is removed is already done in hugepage_init()
using MAYBE_BUILD_BUG_ON().

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-01 18:32:48 +10:00
Aneesh Kumar K.V 945537df7a powerpc/mm/book3s: Rename hash specific PTE bits to carry H_ prefix
This helps to make following hash only pte bits easier.

We have kept _PAGE_CHG_MASK, _HPAGE_CHG_MASK and _PAGE_PROT_BITS as it
is in this patch eventhough they use hash specific bits. Using them in
radix as it is should be ok, because with radix we expect those bit
positions to be zero.

Only renames in this patch, no change in functionality.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-01 18:32:43 +10:00
Aneesh Kumar K.V eee24b5aaf powerpc/mm: Move hash and no hash code to separate files
This patch reduces the number of #ifdefs in C code and will also help in
adding radix changes later. Only code movement in this patch.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[mpe: Propagate copyrights and update GPL text]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-01 18:32:42 +10:00
Aneesh Kumar K.V 50de596de8 powerpc/mm/hash: Add support for Power9 Hash
PowerISA 3.0 adds a parition table indexed by LPID. Parition table
allows us to specify the MMU model that will be used for guest and host
translation.

This patch adds support with SLB based hash model (UPRT = 0). What is
required with this model is to support the new hash page table entry
format and also setup partition table such that we use hash table for
address translation.

We don't have segment table support yet.

In order to make sure we don't load KVM module on Power9 (since we don't
have kvm support yet) this patch also disables KVM on Power9.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-01 18:32:40 +10:00
Aneesh Kumar K.V ff844b741e powerpc/mm: Use generic version of pmdp_clear_flush_young()
The radix variant is going to require a flush_pmd_tlb_range(). With
flush_pmd_tlb_range() added, pmdp_clear_flush_young() is the same as the
generic version. So drop the powerpc specific variant.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-01 18:32:35 +10:00
Aneesh Kumar K.V 30bda41aba powerpc/mm: Drop WIMG in favour of new constants
PowerISA 3.0 introduces two pte bits with the below meaning for radix:
  00 -> Normal Memory
  01 -> Strong Access Order (SAO)
  10 -> Non idempotent I/O (Cache inhibited and guarded)
  11 -> Tolerant I/O (Cache inhibited)

We drop the existing WIMG bits in the Linux page table in favour of the
above constants. We loose _PAGE_WRITETHRU with this conversion. We only
use writethru via pgprot_cached_wthru() which is used by
fbdev/controlfb.c which is Apple control display and also PPC32.

With respect to _PAGE_COHERENCE, we have been marking hpte always
coherent for some time now. htab_convert_pte_flags() always added
HPTE_R_M.

NOTE: KVM changes need closer review.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-01 18:32:33 +10:00
Aneesh Kumar K.V 72176dd0ad powerpc/mm: Use a helper for finding pte bits mapping I/O area
Use a helper instead of open coding with constants. A later patch will
drop the WIMG bits and use PowerISA 3.0 defines.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-01 18:32:32 +10:00
Aneesh Kumar K.V 96270b1fc2 powerpc/mm: Remove RPN_SHIFT and RPN_SIZE
PTE_RPN_SHIFT is actually page size dependent. Even though PowerISA 3.0
expects only the lower 12 bits to be zero, we will always find the pages
to be PAGE_SHIFT aligned. In case of hash config, this also allows us to
use the additional 3 bits to track pte specific information. We need
to make sure we use these bits only for hash specific pte flags.

For both 4K and 64K config, pte now can hold 57 bits address.

Inorder to keep things simpler, drop PTE_RPN_SHIFT and PTE_RPN_SIZE and
specify the 57 bit detail explicitly.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-01 18:32:29 +10:00
Aneesh Kumar K.V ac29c64089 powerpc/mm: Replace _PAGE_USER with _PAGE_PRIVILEGED
_PAGE_PRIVILEGED means the page can be accessed only by the kernel. This
is done to keep pte bits similar to PowerISA 3.0 Radix PTE format. User
pages are now marked by clearing _PAGE_PRIVILEGED bit.

Previously we allowed the kernel to have a privileged page in the lower
address range (USER_REGION). With this patch such access is denied.

We also prevent a kernel access to a non-privileged page in higher
address range (ie, REGION_ID != 0).

Both the above access scenarios should never happen.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jeremy Kerr <jk@ozlabs.org>
Cc: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-01 18:32:26 +10:00
Aneesh Kumar K.V c7d54842de powerpc/mm: Use _PAGE_READ to indicate Read access
This splits the _PAGE_RW bit into _PAGE_READ and _PAGE_WRITE. It also
removes the dependency on _PAGE_USER for implying read only. Few things
to note here is that, we have read implied with write and execute
permission. Hence we should always find _PAGE_READ set on hash pte
fault.

We still can't switch PROT_NONE to !(_PAGE_RWX). Auto numa depends on
marking a prot none pte _PAGE_WRITE. (For more details look at
b191f9b106 "mm: numa: preserve PTE write permissions across a NUMA
hinting fault")

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jeremy Kerr <jk@ozlabs.org>
Cc: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-01 18:32:21 +10:00
Aneesh Kumar K.V 5dc1ef858c powerpc/mm: Use big endian Linux page tables for book3s 64
Traditionally Power server machines have used the Hashed Page Table MMU
mode. In this mode Linux manages its own tree of nested page tables,
aka. "the Linux page tables", which are not used by the hardware
directly, and software loads translations into the hash page table for
use by the hardware.

Power ISA 3.0 defines a new MMU mode, known as Radix Tree Translation,
where the hardware can directly operate on the Linux page tables.
However the hardware requires that the page tables be in big endian
format.

To accommodate this, switch the pgtable types to __be64 and add
appropriate endian conversions.

Because we will be supporting a single kernel binary that boots using
either radix or hash mode, we always store the Linux page tables big
endian, even in hash mode where they are not actually used by the
hardware.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[mpe: Fix sparse errors, flesh out change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-01 18:32:18 +10:00
Aneesh Kumar K.V 4bece39b50 powerpc/mm: Drop PTE_ATOMIC_UPDATES from pmd_hugepage_update()
pmd_hugepage_update() is inside #ifdef CONFIG_TRANSPARENT_HUGEPAGE. THP
can only be enabled if PPC_BOOK3S_64=y && PPC_64K_PAGES=y, aka. hash64.

On hash64 we always define PTE_ATOMIC_UPDATES to 1, meaning the #ifdef
in pmd_hugepage_update() is unnecessary, so drop it.

That is also the only use of PTE_ATOMIC_UPDATES in any of the hash code,
meaning we no longer need to #define it at all in the hash headers.

Note it's still #defined and used in the nohash code.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-01 18:32:15 +10:00
Linus Torvalds d5e2d00898 powerpc updates for 4.6
Highlights:
  - Restructure Linux PTE on Book3S/64 to Radix format from Paul Mackerras
  - Book3s 64 MMU cleanup in preparation for Radix MMU from Aneesh Kumar K.V
  - Add POWER9 cputable entry from Michael Neuling
  - FPU/Altivec/VSX save/restore optimisations from Cyril Bur
  - Add support for new ftrace ABI on ppc64le from Torsten Duwe
 
 Various cleanups & minor fixes from:
  - Adam Buchbinder, Andrew Donnellan, Balbir Singh, Christophe Leroy, Cyril
    Bur, Luis Henriques, Madhavan Srinivasan, Pan Xinhui, Russell Currey,
    Sukadev Bhattiprolu, Suraj Jitindar Singh.
 
 General:
  - atomics: Allow architectures to define their own __atomic_op_* helpers from
    Boqun Feng
  - Implement atomic{, 64}_*_return_* variants and acquire/release/relaxed
    variants for (cmp)xchg from Boqun Feng
  - Add powernv_defconfig from Jeremy Kerr
  - Fix BUG_ON() reporting in real mode from Balbir Singh
  - Add xmon command to dump OPAL msglog from Andrew Donnellan
  - Add xmon command to dump process/task similar to ps(1) from Douglas Miller
  - Clean up memory hotplug failure paths from David Gibson
 
 pci/eeh:
  - Redesign SR-IOV on PowerNV to give absolute isolation between VFs from Wei
    Yang.
  - EEH Support for SRIOV VFs from Wei Yang and Gavin Shan.
  - PCI/IOV: Rename and export virtfn_{add, remove} from Wei Yang
  - PCI: Add pcibios_bus_add_device() weak function from Wei Yang
  - MAINTAINERS: Update EEH details and maintainership from Russell Currey
 
 cxl:
  - Support added to the CXL driver for running on both bare-metal and
    hypervisor systems, from Christophe Lombard and Frederic Barrat.
  - Ignore probes for virtual afu pci devices from Vaibhav Jain
 
 perf:
  - Export Power8 generic and cache events to sysfs from Sukadev Bhattiprolu
  - hv-24x7: Fix usage with chip events, display change in counter values,
    display domain indices in sysfs, eliminate domain suffix in event names,
    from Sukadev Bhattiprolu
 
 Freescale:
  - Updates from Scott: "Highlights include 8xx optimizations, 32-bit checksum
    optimizations, 86xx consolidation, e5500/e6500 cpu hotplug, more fman and
    other dt bits, and minor fixes/cleanup."
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJW69OrAAoJEFHr6jzI4aWAe5EQAJw/hE6WBQc6a7Tj70AnXOqR
 qk/m5pZjuTwQxfBteIvHR1pE5eXdlvtAjcD254LVkFkAbIn19W/h2k0VX/nlee7P
 n/VRHRifjtGmukqHrPYJJ7ua9mNlY7pxh3leGSixBFASnSWqMxNNNziNQtSTcuCs
 TjHiw6NkZ/kzeunA4bAfE4yHVUZjmL74oiS9JbLyaVHqoW4fqWLlh26AKo2yYMZI
 qPicBBG4HBi3FGvoexnKxlJNdcV4HO7LzDjJmCSfUKYCJi+Pw19T5qmhso0q0qVz
 vHg/A8HNeG4Hn83pNVmLeQSAIQRZ3DvTtcLgbjPo+TVwm/hzrRRBWipTeOVbkLW8
 2bcOXT4t7LWUq15EAJ1LYgYZGzcLrfRfUeOcuQ1TWd3+PcfY9pE7FmizsxAAfaVe
 E9j9mpz4XnIqBtWkFHneTIHkQ5OWptyKuZJEaYH0nut4VsP0k8NarkseafGqBPu7
 5eG83gbiQbCVixfOgblV9eocJ29JcwpjPAY4CZSGJimShg909FV7WRgZgJkKWrbK
 dBRco8Jcp4VglGfo2qymv7Uj4KwQoypBREOhiKUvrAsVlDxPfx+bcskhjGu9xGDC
 xs/+nme0/lKa/wg5K4C3mQ1GAlkMWHI0ojhJjsyODbetup5UbkEu03wjAaTdO9dT
 Y6ptGm0rYAJluPNlziFj
 =qkAt
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "This was delayed a day or two by some build-breakage on old toolchains
  which we've now fixed.

  There's two PCI commits both acked by Bjorn.

  There's one commit to mm/hugepage.c which is (co)authored by Kirill.

  Highlights:
   - Restructure Linux PTE on Book3S/64 to Radix format from Paul
     Mackerras
   - Book3s 64 MMU cleanup in preparation for Radix MMU from Aneesh
     Kumar K.V
   - Add POWER9 cputable entry from Michael Neuling
   - FPU/Altivec/VSX save/restore optimisations from Cyril Bur
   - Add support for new ftrace ABI on ppc64le from Torsten Duwe

  Various cleanups & minor fixes from:
   - Adam Buchbinder, Andrew Donnellan, Balbir Singh, Christophe Leroy,
     Cyril Bur, Luis Henriques, Madhavan Srinivasan, Pan Xinhui, Russell
     Currey, Sukadev Bhattiprolu, Suraj Jitindar Singh.

  General:
   - atomics: Allow architectures to define their own __atomic_op_*
     helpers from Boqun Feng
   - Implement atomic{, 64}_*_return_* variants and acquire/release/
     relaxed variants for (cmp)xchg from Boqun Feng
   - Add powernv_defconfig from Jeremy Kerr
   - Fix BUG_ON() reporting in real mode from Balbir Singh
   - Add xmon command to dump OPAL msglog from Andrew Donnellan
   - Add xmon command to dump process/task similar to ps(1) from Douglas
     Miller
   - Clean up memory hotplug failure paths from David Gibson

  pci/eeh:
   - Redesign SR-IOV on PowerNV to give absolute isolation between VFs
     from Wei Yang.
   - EEH Support for SRIOV VFs from Wei Yang and Gavin Shan.
   - PCI/IOV: Rename and export virtfn_{add, remove} from Wei Yang
   - PCI: Add pcibios_bus_add_device() weak function from Wei Yang
   - MAINTAINERS: Update EEH details and maintainership from Russell
     Currey

  cxl:
   - Support added to the CXL driver for running on both bare-metal and
     hypervisor systems, from Christophe Lombard and Frederic Barrat.
   - Ignore probes for virtual afu pci devices from Vaibhav Jain

  perf:
   - Export Power8 generic and cache events to sysfs from Sukadev
     Bhattiprolu
   - hv-24x7: Fix usage with chip events, display change in counter
     values, display domain indices in sysfs, eliminate domain suffix in
     event names, from Sukadev Bhattiprolu

  Freescale:
   - Updates from Scott: "Highlights include 8xx optimizations, 32-bit
     checksum optimizations, 86xx consolidation, e5500/e6500 cpu
     hotplug, more fman and other dt bits, and minor fixes/cleanup"

* tag 'powerpc-4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (179 commits)
  powerpc: Fix unrecoverable SLB miss during restore_math()
  powerpc/8xx: Fix do_mtspr_cpu6() build on older compilers
  powerpc/rcpm: Fix build break when SMP=n
  powerpc/book3e-64: Use hardcoded mttmr opcode
  powerpc/fsl/dts: Add "jedec,spi-nor" flash compatible
  powerpc/T104xRDB: add tdm riser card node to device tree
  powerpc32: PAGE_EXEC required for inittext
  powerpc/mpc85xx: Add pcsphy nodes to FManV3 device tree
  powerpc/mpc85xx: Add MDIO bus muxing support to the board device tree(s)
  powerpc/86xx: Introduce and use common dtsi
  powerpc/86xx: Update device tree
  powerpc/86xx: Move dts files to fsl directory
  powerpc/86xx: Switch to kconfig fragments approach
  powerpc/86xx: Update defconfigs
  powerpc/86xx: Consolidate common platform code
  powerpc32: Remove one insn in mulhdu
  powerpc32: small optimisation in flush_icache_range()
  powerpc: Simplify test in __dma_sync()
  powerpc32: move xxxxx_dcache_range() functions inline
  powerpc32: Remove clear_pages() and define clear_page() inline
  ...
2016-03-19 15:38:41 -07:00
Joonsoo Kim fe896d1878 mm: introduce page reference manipulation functions
The success of CMA allocation largely depends on the success of
migration and key factor of it is page reference count.  Until now, page
reference is manipulated by direct calling atomic functions so we cannot
follow up who and where manipulate it.  Then, it is hard to find actual
reason of CMA allocation failure.  CMA allocation should be guaranteed
to succeed so finding offending place is really important.

In this patch, call sites where page reference is manipulated are
converted to introduced wrapper function.  This is preparation step to
add tracepoint to each page reference manipulation function.  With this
facility, we can easily find reason of CMA allocation failure.  There is
no functional change in this patch.

In addition, this patch also converts reference read sites.  It will
help a second step that renames page._count to something else and
prevents later attempt to direct access to it (Suggested by Andrew).

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17 15:09:34 -07:00
Kirill A. Shutemov ff20c2e0ac mm: Some arch may want to use HPAGE_PMD related values as variables
With next generation power processor, we are having a new mmu model
[1] that require us to maintain a different linux page table format.

Inorder to support both current and future ppc64 systems with a single
kernel we need to make sure kernel can select between different page
table format at runtime. With the new MMU (radix MMU) added, we will
have two different pmd hugepage size 16MB for hash model and 2MB for
Radix model. Hence make HPAGE_PMD related values as a variable.

Actual conversion of HPAGE_PMD to a variable for ppc64 happens in a
followup patch.

[1] http://ibm.biz/power-isa3 (Needs registration).

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-03-03 21:18:29 +11:00
Paul Mackerras 849f86a630 powerpc/mm/book3s-64: Move _PAGE_PRESENT to the most significant bit
This changes _PAGE_PRESENT for 64-bit Book 3S processors from 0x2 to
0x8000_0000_0000_0000, because that is where PowerISA v3.0 CPUs in
radix mode will expect to find it.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-29 20:34:39 +11:00
Paul Mackerras f1a9ae034a powerpc/mm/book3s-64: Free up 7 high-order bits in the Linux PTE
This frees up bits 57-63 in the Linux PTE on 64-bit Book 3S machines.
In the 4k page case, this is done just by reducing the size of the
RPN field to 39 bits, giving 51-bit real addresses.  In the 64k page
case, we had 10 unused bits in the middle of the PTE, so this moves
the RPN field down 10 bits to make use of those unused bits.  This
means the RPN field is now 3 bits larger at 37 bits, giving 53-bit
real addresses in the normal case, or 49-bit real addresses for the
special 4k PFN case.

We are doing this in order to be able to move some other PTE bits
into the positions where PowerISA V3.0 processors will expect to
find them in radix-tree mode.  Ultimately we will be able to move
the RPN field to lower bit positions and make it larger.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-27 21:06:57 +11:00
Aneesh Kumar K.V c777e2a8b6 powerpc/mm: Fix Multi hit ERAT cause by recent THP update
With ppc64 we use the deposited pgtable_t to store the hash pte slot
information. We should not withdraw the deposited pgtable_t without
marking the pmd none. This ensure that low level hash fault handling
will skip this huge pte and we will handle them at upper levels.

Recent change to pmd splitting changed the above in order to handle the
race between pmd split and exit_mmap. The race is explained below.

Consider following race:

		CPU0				CPU1
shrink_page_list()
  add_to_swap()
    split_huge_page_to_list()
      __split_huge_pmd_locked()
        pmdp_huge_clear_flush_notify()
	// pmd_none() == true
					exit_mmap()
					  unmap_vmas()
					    zap_pmd_range()
					      // no action on pmd since pmd_none() == true
	pmd_populate()

As result the THP will not be freed. The leak is detected by check_mm():

	BUG: Bad rss-counter state mm:ffff880058d2e580 idx:1 val:512

The above required us to not mark pmd none during a pmd split.

The fix for ppc is to clear the huge pte of _PAGE_USER, so that low
level fault handling code skip this pte. At higher level we do take ptl
lock. That should serialze us against the pmd split. Once the lock is
acquired we do check the pmd again using pmd_same. That should always
return false for us and hence we should retry the access. We do the
pmd_same check in all case after taking plt with
THP (do_huge_pmd_wp_page, do_huge_pmd_numa_page and
huge_pmd_set_accessed)

Also make sure we wait for irq disable section in other cpus to finish
before flipping a huge pte entry with a regular pmd entry. Code paths
like find_linux_pte_or_hugepte depend on irq disable to get
a stable pte_t pointer. A parallel thp split need to make sure we
don't convert a pmd pte to a regular pmd entry without waiting for the
irq disable section to finish.

Fixes: eef1b3ba05 ("thp: implement split_huge_pmd()")
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-15 21:10:04 +11:00
Kirill A. Shutemov 7aa9a23c69 powerpc, thp: remove infrastructure for handling splitting PMDs
With new refcounting we don't need to mark PMDs splitting.  Let's drop
code to handle this.

pmdp_splitting_flush() is not needed too: on splitting PMD we will do
pmdp_clear_flush() + set_pte_at().  pmdp_clear_flush() will do IPI as
needed for fast_gup.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-15 17:56:32 -08:00
Aneesh Kumar K.V 6a119eae94 powerpc/mm: Add a _PAGE_PTE bit
For a pte entry we will have _PAGE_PTE set. Our pte page
address have a minimum alignment requirement of HUGEPD_SHIFT_MASK + 1.
We use the lower 7 bits to indicate hugepd. ie.

For pmd and pgd we can find:
1) _PAGE_PTE set pte -> indicate PTE
2) bits [2..6] non zero -> indicate hugepd.
   They also encode the size. We skip bit 1 (_PAGE_PRESENT).
3) othewise pointer to next table.

Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-12-14 15:19:14 +11:00
Aneesh Kumar K.V e34aa03ca4 powerpc/mm: Move THP headers around
We support THP only with book3s_64 and 64K page size. Move
THP details to hash64-64k.h to clarify the same.

Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-12-14 15:19:14 +11:00
Aneesh Kumar K.V bf680d5160 powerpc/mm: Don't track subpage valid bit in pte_t
This free up 11 bits in pte_t. In the later patch we also change
the pte_t format so that we can start supporting migration pte
at pmd level. We now track 4k subpage valid bit as below

If we have _PAGE_COMBO set, we override the _PAGE_F_GIX_SHIFT
and _PAGE_F_SECOND. Together we have 4 bits, each of them
used to indicate whether any of the 4 4k subpage in that group
is valid. ie,

[ group 1 bit ]   [ group 2 bit ]  ..... [ group 4 ]
[ subpage 1 - 4]  [ subpage 5- 8]  ..... [ subpage 13 - 16]

We still track each 4k subpage slot number and secondary hash
information in the second half of pgtable_t. Removing the subpage
tracking have some significant overhead on aim9 and ebizzy benchmark and
to support THP with 4K subpage, we do need a pgtable_t of 4096 bytes.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-12-14 15:19:10 +11:00
Aneesh Kumar K.V f281b5d50c powerpc/mm: Don't use pmd_val, pud_val and pgd_val as lvalue
We convert them static inline function here as we did with pte_val in
the previous patch

Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-12-14 15:19:07 +11:00
Scott Wood 0d61f0b3e2 powerpc/booke64: Move mb() to __set_pte_at() with kernel-addr test
map_kernel() doesn't catch all places that create kernel PTEs.  In
particular, vmalloc() calls set_pte_at() directly.  This causes a
crash when booting a non-SMP kernel on e6500.

Move the sync to __set_pte(), to be executed only for kernel addresses.

Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-08-07 23:00:01 -05:00