Commit Graph

25 Commits

Author SHA1 Message Date
Ron Mercer 6a47330892 qlge: Add/use function for link up/down.
We need to set/clear the mac address register when the link goes up/down
respectively.  Without this both ports of a 2-port device can end up
with the same mac address in a bonding scenario.
The new ql_link_on() and ql_link_off() will also be used in handling
certain firmware events.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03 19:10:46 -07:00
Ron Mercer b8facca01b qlge: Allow RX buf rings to be > than 4096 bytes.
RX buffer rings can be comprised of non-contiguous fixed
size chunks of memory. The ring is given to the hardware
as a pointer to a location that stores the location of
the queue.  If the queue is greater than 4096 bytes then
the hardware gets a list of said pointers.
This patch addes the necessary logic to generate the list if
the queue size exceeds 4096.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-11 02:37:05 -07:00
Ron Mercer 88c55e3cbd qlge: Relax alignment on TX harware queue.
The alignment was on size of queue boundary, but the hardware
only requires 4-byte alignment.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-11 02:37:04 -07:00
Ron Mercer e4552f51ce qlge: Add support for varied pcie function numbers.
Currently we support only PCIe NIC functions zero and one, and FCoE
functions as 3 and 4. Future configurations can mix these up in any
fashion.
This patch removes the 0-1 dependancy and allows usage of any of the 4
functions. We also find the alternate NIC function (if exist) and
determine our port number based on the comparison of the two functions:
Lower function number gets first port, higher function gets second port.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-10 01:04:14 -07:00
Ron Mercer cfec0cbc92 qlge: Add support for retrieving firmware version.
This is used by driver banner and ethtool info.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-10 01:04:08 -07:00
Ron Mercer d2ba498668 qlge: Fix timeout on indexed register wait.
There are 8 banks of 'sub-registers' each of which are accessed
through address/data register pair.  An example would be reading
flash or the xgmac.  Accessing these require the driver to wait for
a ready bit before writing the address and then accessing the data.
This patch increases the timeout to 100us to prevent timeouts
that have been seen on some platforms.
These register are accessed in process context only.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-08 00:09:47 -07:00
Ron Mercer d555f5921f qlge: Increase filtering for inbound csum settings.
Chip does not do UDP checksum when fragmentation occurs.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10 04:43:51 -07:00
Ron Mercer 2ee1e272d1 qlge: Add worker-handler for firmware events.
This worker and it's supporting routines are used for
IDC 'inter-device-communication' events that require
an ACK mailbox command be sent to allow completion
of the request. These requests are originated by
another function wanting to change some common
port paramters. Typical example would be:

1) Change max TX/RX frame size allowed.
2) Change pause parameters.
3) Change loopback mode.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-03 23:50:47 -08:00
Ron Mercer bcc2cb3b97 qlge: Add support for getting/setting port config.
This patch adds functionality to get and set port parameters.
Currently it is used to set maximum TX/RX frame sizes. This process is
also capable of setting:
1) Pause type: Standard or Priority based.
2) Loop back mode.
3) Enable Jumbo frame mode (included here...)

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02 22:45:24 -08:00
Ron Mercer cdca8d02ea qlge: Add support for device ID 8000.
This device has more firmware support for link management, setting
TX and RX maximum frame sizes.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02 22:45:24 -08:00
Ron Mercer b0c2aadfa4 qlge: Prepare to add new device.
This organizes a few calls into a function table to enable adding new
devices.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-26 22:28:09 -08:00
Ron Mercer 125844eaff qlge: Move firmware event handler.
This is not a logical change but rather a move of the inbound firmware event
handler into it's own function as it will later be called by the outbound
path.
The addition of the mutex is to create exclusive access to the mailbox
commands between inbound and outbound handling.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-26 22:28:08 -08:00
Ron Mercer b82808b759 qlge: Add defines for firmware support.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-26 22:28:06 -08:00
Ron Mercer 26351479ed qlge: bugfix: Fix endian issue when reading flash.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-02 13:53:57 -08:00
Ron Mercer 683d46a979 qlge: Remove dynamic alloc of rx ring control blocks.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11 00:07:36 -08:00
Ron Mercer 697cdc4680 qlge: Remove support for device ID 8000.
Support for dev id 8000 is pushed out until 2.6.30.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11 00:07:35 -08:00
Ron Mercer 9734552439 qlge: Get rid of split addresses in hardware control blocks.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11 00:07:34 -08:00
Ron Mercer ba7cd3ba97 qlge: Get rid of volatile usage for shadow register.
Putting back ql_read_sh_reg() function and using rmb() instead of
volatile.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11 00:07:34 -08:00
Ron Mercer 3537d54c0c qlge: Fix sparse warnings for tx ring indexes.
Warnings:
drivers/net/qlge/qlge_main.c:1474:34: warning: restricted degrades to integer
drivers/net/qlge/qlge_main.c:1475:36: warning: restricted degrades to integer
drivers/net/qlge/qlge_main.c:1592:51: warning: restricted degrades to integer
drivers/net/qlge/qlge_main.c:1941:20: warning: incorrect type in assignment (different base types)
drivers/net/qlge/qlge_main.c:1941:20:    expected restricted unsigned int [usertype] tid
drivers/net/qlge/qlge_main.c:1941:20:    got int [signed] index
drivers/net/qlge/qlge_main.c:1945:24: warning: incorrect type in assignment (different base types)
drivers/net/qlge/qlge_main.c:1945:24:    expected restricted unsigned int [usertype] txq_idx
drivers/net/qlge/qlge_main.c:1945:24:    got unsigned int [unsigned] [usertype] tx_ring_idx

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-05 18:19:59 -08:00
Ron Mercer 2c9a0d41e9 qlge: Fix sparse warning regarding rx buffer queues.
Warnings:
drivers/net/qlge/qlge_main.c:909:17: warning: incorrect type in assignment (different base types)
drivers/net/qlge/qlge_main.c:909:17:    expected unsigned int [unsigned] [usertype] addr_lo
drivers/net/qlge/qlge_main.c:909:17:    got restricted unsigned int [usertype] <noident>
drivers/net/qlge/qlge_main.c:911:17: warning: incorrect type in assignment (different base types)
drivers/net/qlge/qlge_main.c:911:17:    expected unsigned int [unsigned] [usertype] addr_hi
drivers/net/qlge/qlge_main.c:911:17:    got restricted unsigned int [usertype] <noident>
drivers/net/qlge/qlge_main.c:974:17: warning: incorrect type in assignment (different base types)
drivers/net/qlge/qlge_main.c:974:17:    expected unsigned int [unsigned] [usertype] addr_lo
drivers/net/qlge/qlge_main.c:974:17:    got restricted unsigned int [usertype] <noident>
drivers/net/qlge/qlge_main.c:975:17: warning: incorrect type in assignment (different base types)
drivers/net/qlge/qlge_main.c:975:17:    expected unsigned int [unsigned] [usertype] addr_hi
drivers/net/qlge/qlge_main.c:975:17:    got restricted unsigned int [usertype] <noident>
drivers/net/qlge/qlge_main.c:2132:16: warning: incorrect type in assignment (different base types)
drivers/net/qlge/qlge_main.c:2132:16:    expected unsigned int [unsigned] [usertype] addr_lo
drivers/net/qlge/qlge_main.c:2132:16:    got restricted unsigned int [usertype] <noident>
drivers/net/qlge/qlge_main.c:2133:16: warning: incorrect type in assignment (different base types)
drivers/net/qlge/qlge_main.c:2133:16:    expected unsigned int [unsigned] [usertype] addr_hi
drivers/net/qlge/qlge_main.c:2133:16:    got restricted unsigned int [usertype] <noident>
drivers/net/qlge/qlge_main.c:2212:15: warning: incorrect type in assignment (different base types)
drivers/net/qlge/qlge_main.c:2212:15:    expected unsigned int [unsigned] [usertype] addr_lo
drivers/net/qlge/qlge_main.c:2212:15:    got restricted unsigned int [usertype] <noident>
drivers/net/qlge/qlge_main.c:2214:15: warning: incorrect type in assignment (different base types)
drivers/net/qlge/qlge_main.c:2214:15:    expected unsigned int [unsigned] [usertype] addr_hi
drivers/net/qlge/qlge_main.c:2214:15:    got restricted unsigned int [usertype] <noident>

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-05 18:19:20 -08:00
Ron Mercer a303ce0972 qlge: Fix sparse endian warning for inbound packet control block flags.
Changed flags element from __le32 to 3 reserved bytes and one byte of
flags.  Changed flags bit definitions to reflect byte width instead of
__le32 width.

Warnings:
drivers/net/qlge/qlge_main.c:1206:16: warning: restricted degrades to integer
drivers/net/qlge/qlge_main.c:1207:16: warning: restricted degrades to integer
drivers/net/qlge/qlge_main.c:1233:17: warning: restricted degrades to integer
drivers/net/qlge/qlge_main.c:1276:17: warning: restricted degrades to integer
drivers/net/qlge/qlge_main.c:1349:19: warning: restricted degrades to integer

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-05 18:18:22 -08:00
Ron Mercer 2b72c7849f qlge: bugfix: Fix shadow register endian issue.
Shadow registers are consistent memory locations to which the chip
echos ring indexes in little endian format.  These values need to
be endian swapped before referencing.

Note:
The register pointer declaration uses the volatile modifier which
causes warnings in checkpatch.
Per Documentation/volatile-considered-harmful.txt:
  - Pointers to data structures in coherent memory which might be modified
    by I/O devices can, sometimes, legitimately be volatile.  A ring buffer
    used by a network adapter, where that adapter changes pointers to
    indicate which descriptors have been processed, is an example of this
    type of situation.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04 17:07:50 -08:00
Ron Mercer bb0d215c8f qlge: Fix MSI/legacy single interrupt bug.
The chip can issue spurious interrupts for single interrupt
modes. We use disable to clear the condition and allow processing to
continue. Also got rid of legacy specific code since it now needs to
be done on MSI single irq also.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-22 07:00:49 -04:00
Ron Mercer 4850137170 qlge: Fix page size ifdef test.
This ASIC does support all page sizes. For 4k and 8k page size the TX
control block needs an external scatter gather list.  For page sizes
larger than 8k the max frags is satisfied by the original TX control
block.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-13 22:55:59 -07:00
Ron Mercer c4e84bde1d qlge: New Qlogic 10Gb Ethernet Driver.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-18 11:56:28 -04:00