Commit Graph

37 Commits

Author SHA1 Message Date
Michael Ellerman 407821a34f powerpc: Initialise paca.data_offset with poison
It's possible for the cpu_possible_mask to change between the time we
initialise the pacas and the time we setup per_cpu areas.

Obviously impossible cpus shouldn't ever be running, but stranger things
have happened. So be paranoid and initialise data_offset with a poison
value in case we don't set it up later.

Based on a patch from Anton Blanchard.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-10 09:35:27 +10:00
Anton Blanchard 448054a650 powerpc: Remove iseries specific fields in lppaca
Remove all the iseries specific fields in the lppaca.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-04-30 15:37:16 +10:00
Stephen Rothwell f5339277eb powerpc: Remove FW_FEATURE ISERIES from arch code
This is no longer selectable, so just remove all the dependent code.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-03-21 11:16:11 +11:00
Paul Gortmaker 4b16f8e2d6 powerpc: various straight conversions from module.h --> export.h
All these files were including module.h just for the basic
EXPORT_SYMBOL infrastructure.  We can shift them off to the
export.h header which is a way smaller footprint and thus
realize some compile time gains.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:30:44 -04:00
Paul Mackerras 969391c58a powerpc, KVM: Split HVMODE_206 cpu feature bit into separate HV and architecture bits
This replaces the single CPU_FTR_HVMODE_206 bit with two bits, one to
indicate that we have a usable hypervisor mode, and another to indicate
that the processor conforms to PowerISA version 2.06.  We also add
another bit to indicate that the processor conforms to ISA version 2.01
and set that for PPC970 and derivatives.

Some PPC970 chips (specifically those in Apple machines) have a
hypervisor mode in that MSR[HV] is always 1, but the hypervisor mode
is not useful in the sense that there is no way to run any code in
supervisor mode (HV=0 PR=0).  On these processors, the LPES0 and LPES1
bits in HID4 are always 0, and we use that as a way of detecting that
hypervisor mode is not useful.

Where we have a feature section in assembly code around code that
only applies on POWER7 in hypervisor mode, we use a construct like

END_FTR_SECTION_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)

The definition of END_FTR_SECTION_IFSET is such that the code will
be enabled (not overwritten with nops) only if all bits in the
provided mask are set.

Note that the CPU feature check in __tlbie() only needs to check the
ARCH_206 bit, not the HVMODE bit, because __tlbie() can only get called
if we are running bare-metal, i.e. in hypervisor mode.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-07-12 13:16:58 +03:00
Milton Miller 2cd947f175 powerpc: Use nr_cpu_ids in initial paca allocation
Now that we never set a cpu above nr_cpu_ids possible we can
limit our initial paca allocation to nr_cpu_ids.  We can then
clamp the number of cpus in platforms/iseries/setup.c.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 14:30:44 +10:00
Benjamin Herrenschmidt 2dd60d79e0 powerpc: In HV mode, use HSPRG0 for PACA
When running in Hypervisor mode (arch 2.06 or later), we store the PACA
in HSPRG0 instead of SPRG1. The architecture specifies that SPRGs may be
lost during a "nap" power management operation (though they aren't
currently on POWER7) and this enables use of SPRG1 by KVM guests.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-20 11:03:22 +10:00
Ryan Grimm c1854e0072 powerpc: Set nr_cpu_ids early and use it to free PACAs
Without this, "holes" in the CPU numbering can cause us to
free too many PACAs

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-05 16:22:11 +10:00
Benjamin Herrenschmidt f2f6dad6ca powerpc/iseries: Fix early init access to lppaca
The combination of commit

8154c5d22d and
93c22703ef

Broke boot on iSeries.

The problem is that iSeries very early boot code, which generates
the device-tree and runs before our normal early initializations
does need access the lppaca's very early, before the PACA array is
initialized, and in fact even before the boot PACA has been
initialized (it contains all 0's at this stage).

However, the first patch above makes that code use the new
llpaca_of(cpu) accessor, which itself is changed by the second patch to
use the PACA array.

We fix that by reverting iSeries to directly dereferencing the array. In
addition, we fix all iterators in the iSeries code to always skip CPU
whose number is above 63 which is the maximum size of that array and
the maximum number of supported CPUs on these machines.

Additionally, we make sure the boot_paca is properly initialized
in our early startup code.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-10 10:06:02 +11:00
Linus Torvalds d4429f608a Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (71 commits)
  powerpc/44x: Update ppc44x_defconfig
  powerpc/watchdog: Make default timeout for Book-E watchdog a Kconfig option
  fsl_rio: Add comments for sRIO registers.
  powerpc/fsl-booke: Add e55xx (64-bit) smp defconfig
  powerpc/fsl-booke: Add p5020 DS board support
  powerpc/fsl-booke64: Use TLB CAMs to cover linear mapping on FSL 64-bit chips
  powerpc/fsl-booke: Add support for FSL Arch v1.0 MMU in setup_page_sizes
  powerpc/fsl-booke: Add support for FSL 64-bit e5500 core
  powerpc/85xx: add cache-sram support
  powerpc/85xx: add ngPIXIS FPGA device tree node to the P1022DS board
  powerpc: Fix compile error with paca code on ppc64e
  powerpc/fsl-booke: Add p3041 DS board support
  oprofile/fsl emb: Don't set MSR[PMM] until after clearing the interrupt.
  powerpc/fsl-booke: Add PCI device ids for P2040/P3041/P5010/P5020 QoirQ chips
  powerpc/mpc8xxx_gpio: Add support for 'qoriq-gpio' controllers
  powerpc/fsl_booke: Add support to boot from core other than 0
  powerpc/p1022: Add probing for individual DMA channels
  powerpc/fsl_soc: Search all global-utilities nodes for rstccr
  powerpc: Fix invalid page flags in create TLB CAM path for PTE_64BIT
  powerpc/mpc83xx: Support for MPC8308 P1M board
  ...

Fix up conflict with the generic irq_work changes in arch/powerpc/kernel/time.c
2010-10-21 21:19:54 -07:00
Kumar Gala 3c4b76449b powerpc: Fix compile error with paca code on ppc64e
arch/powerpc/kernel/paca.c: In function 'allocate_lppacas':
arch/powerpc/kernel/paca.c:111:1: error: parameter name omitted
arch/powerpc/kernel/paca.c:111:1: error: parameter name omitted

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-10-14 00:53:08 -05:00
Paul Mackerras 93c22703ef powerpc: Dynamically allocate most lppaca structs
This arranges for the lppaca structs for most cpus to be dynamically
allocated in the same manner as the paca structs.  If we don't include
support for legacy iSeries, only the first lppaca is statically
allocated; the rest are dynamically allocated.  If we include legacy
iSeries support, then we statically allocate the first 64 lppaca
structs, since the iSeries hypervisor requires that the lppaca
structs be present in the data section of the kernel image, but
legacy iSeries supports at most 64 cpus.

With CONFIG_NR_CPUS, the kernel image size for a typical pSeries config
went from:

   text    data     bss     dec     hex filename
9524478 4734564 8469944 22728986        15ad11a ../test-1024/vmlinux

to:

   text    data     bss     dec     hex filename
9524482 3751508 8469944 21745934        14bd10e ../test-1024/vmlinux

a reduction of 983052 bytes overall.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-09-02 14:07:31 +10:00
Ingo Molnar daab7fc734 Merge commit 'v2.6.36-rc3' into x86/memblock
Conflicts:
	arch/x86/kernel/trampoline.c
	mm/memblock.c

Merge reason: Resolve the conflicts, update to latest upstream.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-08-31 09:45:46 +02:00
Benjamin Herrenschmidt cd3db0c4ca memblock: Remove rmo_size, burry it in arch/powerpc where it belongs
The RMA (RMO is a misnomer) is a concept specific to ppc64 (in fact
server ppc64 though I hijack it on embedded ppc64 for similar purposes)
and represents the area of memory that can be accessed in real mode
(aka with MMU off), or on embedded, from the exception vectors (which
is bolted in the TLB) which pretty much boils down to the same thing.

We take that out of the generic MEMBLOCK data structure and move it into
arch/powerpc where it belongs, renaming it to "RMA" while at it.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-08-05 12:56:08 +10:00
Benjamin Herrenschmidt 412a4ac5e9 Merge commit 'gcl/next' into next 2010-08-04 10:26:03 +10:00
Matt Evans fc53b4202e powerpc/kexec: Switch to a static PACA on the way out
With dynamic PACAs, the kexecing CPU's PACA won't lie within the kernel
static data and there is a chance that something may stomp it when preparing
to kexec.  This patch switches this final CPU to a static PACA just before
we pull the switch.

Signed-off-by: Matt Evans <matt@ozlabs.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-07-31 14:56:30 +10:00
Yinghai Lu 95f72d1ed4 lmb: rename to memblock
via following scripts

      FILES=$(find * -type f | grep -vE 'oprofile|[^K]config')

      sed -i \
        -e 's/lmb/memblock/g' \
        -e 's/LMB/MEMBLOCK/g' \
        $FILES

      for N in $(find . -name lmb.[ch]); do
        M=$(echo $N | sed 's/lmb/memblock/g')
        mv $N $M
      done

and remove some wrong change like lmbench and dlmb etc.

also move memblock.c from lib/ to mm/

Suggested-by: Ingo Molnar <mingo@elte.hu>
Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-07-14 17:14:00 +10:00
Michael Neuling 1fc711f7ff powerpc/kexec: Fix race in kexec shutdown
In kexec_prepare_cpus, the primary CPU IPIs the secondary CPUs to
kexec_smp_down().  kexec_smp_down() calls kexec_smp_wait() which sets
the hw_cpu_id() to -1.  The primary does this while leaving IRQs on
which means the primary can take a timer interrupt which can lead to
the IPIing one of the secondary CPUs (say, for a scheduler re-balance)
but since the secondary CPU now has a hw_cpu_id = -1, we IPI CPU
-1... Kaboom!

We are hitting this case regularly on POWER7 machines.

There is also a second race, where the primary will tear down the MMU
mappings before knowing the secondaries have entered real mode.

Also, the secondaries are clearing out any pending IPIs before
guaranteeing that no more will be received.

This changes kexec_prepare_cpus() so that we turn off IRQs in the
primary CPU much earlier.  It adds a paca flag to say that the
secondaries have entered the kexec_smp_down() IPI and turned off IRQs,
rather than overloading hw_cpu_id with -1.  This new paca flag is
again used to in indicate when the secondaries has entered real mode.

It also ensures that all CPUs have their IRQs off before we clear out
any pending IPI requests (in kexec_cpu_down()) to ensure there are no
trailing IPIs left unacknowledged.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-21 17:31:11 +10:00
Michael Ellerman 1426d5a3bd powerpc: Dynamically allocate pacas
On 64-bit kernels we currently have a 512 byte struct paca_struct for
each cpu (usually just called "the paca"). Currently they are statically
allocated, which means a kernel built for a large number of cpus will
waste a lot of space if it's booted on a machine with few cpus.

We can avoid that by only allocating the number of pacas we need at
boot. However this is complicated by the fact that we need to access
the paca before we know how many cpus there are in the system.

The solution is to dynamically allocate enough space for NR_CPUS pacas,
but then later in boot when we know how many cpus we have, we free any
unused pacas.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-03-09 11:52:52 +11:00
Benjamin Herrenschmidt dce6670aaa powerpc: Add PACA fields specific to 64-bit Book3E processors
This adds various fields in the PACA that are for use specifically
by Book3E processors, such as exception save areas, current pgd
pointer, special exceptions kernel stacks etc...

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-20 10:25:08 +10:00
Benjamin Herrenschmidt 91c60b5b82 powerpc: Separate PACA fields for server CPUs
This patch has no effect other than re-ordering PACA fields on
current server CPUs. It however is a pre-requisite for future
support of BookE 64-bit processors. Various parts of the PACA
struct are now moved under some ifdef's, either the new
CONFIG_PPC_BOOK3S or CONFIG_PPC_STD_MMU_64, whatever seems more
appropriate.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.craashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-09 16:47:38 +10:00
Brian King 409001948d powerpc: Update page-in counter for CMM
A new field has been added to the VPA as a method for the client OS to
communicate to firmware the number of page-ins it is performing when
running collaborative memory overcommit.  The hypervisor will use this
information to better determine if a partition is experiencing memory
pressure and needs more memory allocated to it.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-11-05 22:08:28 +11:00
Paul Mackerras 549e8152de powerpc: Make the 64-bit kernel as a position-independent executable
This implements CONFIG_RELOCATABLE for 64-bit by making the kernel as
a position-independent executable (PIE) when it is set.  This involves
processing the dynamic relocations in the image in the early stages of
booting, even if the kernel is being run at the address it is linked at,
since the linker does not necessarily fill in words in the image for
which there are dynamic relocations.  (In fact the linker does fill in
such words for 64-bit executables, though not for 32-bit executables,
so in principle we could avoid calling relocate() entirely when we're
running a 64-bit kernel at the linked address.)

The dynamic relocations are processed by a new function relocate(addr),
where the addr parameter is the virtual address where the image will be
run.  In fact we call it twice; once before calling prom_init, and again
when starting the main kernel.  This means that reloc_offset() returns
0 in prom_init (since it has been relocated to the address it is running
at), which necessitated a few adjustments.

This also changes __va and __pa to use an equivalent definition that is
simpler.  With the relocatable kernel, PAGE_OFFSET and MEMORY_START are
constants (for 64-bit) whereas PHYSICAL_START is a variable (and
KERNELBASE ideally should be too, but isn't yet).

With this, relocatable kernels still copy themselves down to physical
address 0 and run there.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-09-15 11:08:38 -07:00
Paul Mackerras 1f6a93e4c3 powerpc: Make it possible to move the interrupt handlers away from the kernel
This changes the way that the exception prologs transfer control to
the handlers in 64-bit kernels with the aim of making it possible to
have the prologs separate from the main body of the kernel.  Now,
instead of computing the address of the handler by taking the top
32 bits of the paca address (to get the 0xc0000000........ part) and
ORing in something in the bottom 16 bits, we get the base address of
the kernel by doing a load from the paca and add an offset.

This also replaces an mfmsr and an ori to compute the MSR value for
the handler with a load from the paca.  That makes it unnecessary to
have a separate version of EXCEPTION_PROLOG_PSERIES that forces 64-bit
mode.

We can no longer use a direct branches in the exception prolog code,
which means that the SLB miss handlers can't branch directly to
.slb_miss_realmode any more.  Instead we have to compute the address
and do an indirect branch.  This is conditional on CONFIG_RELOCATABLE;
for non-relocatable kernels we use a direct branch as before.  (A later
change will allow CONFIG_RELOCATABLE to be set on 64-bit powerpc.)

Since the secondary CPUs on pSeries start execution in the first 0x100
bytes of real memory and then have to get to wherever the kernel is,
we can't use a direct branch to get there.  Instead this changes
__secondary_hold_spinloop from a flag to a function pointer.  When it
is set to a non-NULL value, the secondary CPUs jump to the function
pointed to by that value.

Finally this eliminates one code difference between 32-bit and 64-bit
by making __secondary_hold be the text address of the secondary CPU
spinloop rather than a function descriptor for it.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-09-15 11:08:08 -07:00
Tony Breeds 90035fe378 [POWERPC] Raise the upper limit of NR_CPUS and move the pacas into the BSS
This adds the required functionality to fill in all pacas at runtime.

With NR_CPUS=1024
text    data     bss     dec     hex filename
 137 1704032       0 1704169  1a00e9 arch/powerpc/kernel/paca.o :Before
 121 1179744  524288 1704153  1a00d9 arch/powerpc/kernel/paca.o :After

Also remove unneeded #includes from arch/powerpc/kernel/paca.c

Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-24 20:58:04 +10:00
Benjamin Herrenschmidt 7c6352a469 [POWERPC] Initialize paca->current earlier
Currently, we initialize the "current" pointer in the PACA (which
is used by the "current" macro in the kernel) before calling
setup_system(). That means that early_setup() is called with
current still "NULL" which is -not- a good idea. It happens to
work so far but breaks with lockdep when early code calls printk.

This changes it so that all PACAs are statically initialized with
__current pointing to the init task. For non-0 CPUs, this is fixed
up before use.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-17 07:46:10 +10:00
Stephen Rothwell 30ff2e87ed [POWERPC] iSeries: Make iseries_reg_save private to iSeries
Now that we have the alpaca, the reg_save_ptr is no longer needed in the
paca.  Eradicate all global uses of it and make it static in the iSeries
lpardata.c

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-15 21:21:25 +10:00
Michael Neuling 2f6093c847 [POWERPC] Implement SLB shadow buffer
This adds a shadow buffer for the SLBs and regsiters it with PHYP.
Only the bolted SLB entries (top 3) are shadowed.

The SLB shadow buffer tells the hypervisor what the kernel needs to
have in the SLB for the kernel to be able to function.  The hypervisor
can use this information to speed up partition context switches.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-08 17:08:56 +10:00
Jörn Engel 6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Stephen Rothwell 612f02d6d6 [POWERPC] Clean up it_lp_queue.h
No more StudlyCaps.
Remove from a couple of places it is no longer needed.
Use C style comments.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-28 15:18:55 +10:00
Anton Blanchard 4df20460a3 [PATCH] powerpc: Allow non zero boot cpuids
We currently have a hack to flip the boot cpu and its secondary thread
to logical cpuid 0 and 1. This means the logical - physical mapping will
differ depending on which cpu is boot cpu. This is most apparent on
kexec, where we might kexec on any cpu and therefore change the mapping
from boot to boot.

The patch below does a first pass early on to work out the logical cpuid
of the boot thread. We then fix up some paca structures to match.

Ive also removed the boot_cpuid_phys variable for ppc64, to be
consistent we use get_hard_smp_processor_id(boot_cpuid) everywhere.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-27 14:48:48 +11:00
David Gibson 3356bb9f7b [PATCH] powerpc: Remove lppaca structure from the PACA
At present the lppaca - the structure shared with the iSeries
hypervisor and phyp - is contained within the PACA, our own low-level
per-cpu structure.  This doesn't have to be so, the patch below
removes it, making a separate array of lppaca structures.

This saves approximately 500*NR_CPUS bytes of image size and kernel
memory, because we don't need aligning gap between the Linux and
hypervisor portions of every PACA.  On the other hand it means an
extra level of dereference in many accesses to the lppaca.

The patch also gets rid of several places where we assign the paca
address to a local variable for no particular reason.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-13 21:17:39 +11:00
David Gibson 404849bbd2 [PATCH] powerpc: Remove some unneeded fields from the paca
This patch removes several unnecessary fields from the paca:

- next_jiffy_update_tb was simply unused.  Remove trivially.

- The exdsi exception save area was not used.  There were plans to use
  it, but they never seem to have gone anywhere.  If they ever do, we
  can put it back.  Remove from the paca, and from asm-offsets.c

- The default_decr field was used from asm, but was only ever assigned
  the value of tb_ticks_per_jiffy.  Just access tb_ticks_per_jiffy from
  asm directly instead.

Built and booted on POWER5 LPAR and iSeries RS64.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 14:50:35 +11:00
David Gibson 1888e7b51c [PATCH] powerpc: Remove ItLpRegSave area from the paca
On iSeries, the paca contains, amongst other things an ItLpRegSave
structure used by the hypervisor to save registers.  The hypervisor
locates this area through a pointer at the beginning of the paca, so
the structure itself can be located elsewhere.  This patch moves the
reg_save area out into its own array.  This reduces the amount of
iSeries specific gunk which is visible to general powerpc code via
paca.h

Built and booted on POWER5 LPAR and iSeries RS64.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 14:50:32 +11:00
Benjamin Herrenschmidt a7f290dad3 [PATCH] powerpc: Merge vdso's and add vdso support to 32 bits kernel
This patch moves the vdso's to arch/powerpc, adds support for the 32
bits vdso to the 32 bits kernel, rename systemcfg (finally !), and adds
some new (still untested) routines to both vdso's: clock_gettime() with
support for CLOCK_REALTIME and CLOCK_MONOTONIC, clock_getres() (same
clocks) and get_tbfreq() for glibc to retreive the timebase frequency.

Tom,Steve: The implementation of get_tbfreq() I've done for 32 bits
returns a long long (r3, r4) not a long. This is such that if we ever
add support for >4Ghz timebases on ppc32, the userland interface won't
have to change.

I have tested gettimeofday() using some glibc patches in both ppc32 and
ppc64 kernels using 32 bits userland (I haven't had a chance to test a
64 bits userland yet, but the implementation didn't change and was
tested earlier). I haven't tested yet the new functions.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-11 22:25:39 +11:00
Paul Mackerras 799d6046d3 [PATCH] powerpc: merge code values for identifying platforms
This patch merges platform codes.  systemcfg->platform is no longer used,
systemcfg use in general is deprecated as much as possible (and renamed
_systemcfg before it gets completely moved elsewhere in a future patch),
_machine is now used on ppc64 along as ppc32.  Platform codes aren't gone
yet but we are getting a step closer. A bunch of asm code in head[_64].S
is also turned into C code.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10 13:37:51 +11:00
David Gibson 8882a4da1c [PATCH] powerpc: Move various ppc64 files with no ppc32 equivalent to powerpc
This patch moves a bunch of files from arch/ppc64 and
include/asm-ppc64 which have no equivalents in ppc32 code into
arch/powerpc and include/asm-powerpc.  The file affected are:
	abs_addr.h
	compat.h
	lppaca.h
	paca.h
	tce.h
	cpu_setup_power4.S
	ioctl32.c
	firmware.c
	pacaData.c

The only changes apart from the move and corresponding Makefile
changes are:
	- #ifndef/#define in includes updated to _ASM_POWERPC_ form
	- trailing whitespace removed
	- comments giving full paths removed
	- pacaData.c renamed paca.c to remove studlyCaps
	- Misplaced { moved in lppaca.h

Built and booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64), built
for 32-bit powermac (ARCH=powerpc).

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10 11:24:04 +11:00